Silvercrest 96126 Operating Instructions Manual

IAN 96126

HAIR & BEARD TRIMMER SHBS 5 A1

HAAR- UND BARTSCHNEIDER

Bedienungsanleitung

HAIR & BEARD TRIMMER

Operating instructions

APARAT DE TUNS PĂRUL ŞI BARBA

Instrucţiuni de utilizare

ΚΟΥΡΕΥΤΙΚΗ ΜΗΧΑΝΗ ΓΙΑ

ΜΑΛΛΙΑ ΚΑΙ ΓΕΝΙΑ

Οδηүίες χρήσης

APARAT ZA ŠIŠANJE

Upute za upotrebu

CV_96126_SHBS5A1_LB7.indd 2CV_96126_SHBS5A1_LB7.indd 2 23.01.14 08:1423.01.14 08:14

GB / CY Operating instructions Page 1

HR Upute za upotrebu Stranica 19

RO Instrucţiuni de utilizare Pagina 37

GR / CY Οδηүίες χρήσης Σελίδα 55

DE / AT / CH Bedienungsanleitung Seite 73

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

Prije nego što pročitate tekst, otvorite stranicu sa slikama i upoznajte se na osnovu toga sa svim funkcijama uređaja.

Înainte de a citi instrucţiunile, priviţi imaginile şi familiarizaţi-vă cu toate funcţiile aparatului.

Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις λειτουργίες της συσκευ-

ής.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktio-

nen des Gerätes vertraut.

CV_96126_SHBS5A1_LB7.indd 3CV_96126_SHBS5A1_LB7.indd 3 23.01.14 08:1423.01.14 08:14

D E F

C

A

B

CV_96126_SHBS5A1_LB7.indd 4CV_96126_SHBS5A1_LB7.indd 4 23.01.14 08:1423.01.14 08:14

1

SHBS 5 A1

GB

CY

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . 2

Information concerning these operating

instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Limitation of liability . . . . . . . . . . . . . . . . . . . . . 2

Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warnings used . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety. . . . . . . . . . . . . . . . . . . . . . . . . . 4

Basic safety instructions . . . . . . . . . . . . . . . . . . 4

Package contents . . . . . . . . . . . . . . . . 7

Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Disposal of packaging . . . . . . . . . . . . . . . . . . . 8

Appliance description . . . . . . . . . . . . . 8

Before ﬁ rst use . . . . . . . . . . . . . . . . . . 9

Charging the batteries . . . . . . . . . . . . . . . . . . . 9

Operation with the mains power adapter . . . . 9

Oiling the cutting attachments . . . . . . . . . . . . 10

Handling and use . . . . . . . . . . . . . . . 10

Attaching/changing the cutter attachments . . 10

Attaching/changing the comb attachments . . 10

Hair trimmer attachment . . . . . . . . . . . . . . . . 11

Beard trimmer attachment . . . . . . . . . . . . . . . 12

Precision trimmer attachment . . . . . . . . . . . . . 12

Ear/nose hair trimmer attachment . . . . . . . . . 12

Shaver attachment . . . . . . . . . . . . . . . . . . . . . 12

Cleaning and care . . . . . . . . . . . . . . . 13

Cleaning the shaver attachment . . . . . . . . . . 14

Cleaning the ear/nose hair trimmer

attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Disposal . . . . . . . . . . . . . . . . . . . . . . . 15

Disposal of the appliance . . . . . . . . . . . . . . . 15

Disposal of batteries . . . . . . . . . . . . . . . . . . . 16

Appendix . . . . . . . . . . . . . . . . . . . . . . 17

Technical details. . . . . . . . . . . . . . . . . . . . . . . 17

Notes on the Declaration of Conformity . . . . 17

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Importer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

IB_96126_SHBS5A1_LB7.indb 1IB_96126_SHBS5A1_LB7.indb 1 21.01.14 15:3721.01.14 15:37

2

SHBS 5 A1

GB

CY

Introduction

Information concerning these operating instructions

Congratulations on the purchase of your new appliance.

You have selected a high-quality product. The operating instructions are a constituent of this product.

They contain important information about safety, use and disposal. Before using the product,

familiarise yourself with all operating and safety instructions. Use this product only as described

and only for the speciﬁ ed areas of application. Retain these instructions for future reference.

Please also pass these operating instructions on to any future owner(s).

Copyright

This documentation is subject to copyright protection.

Any copying or reproduction, including extracts thereof, and the reproduction of images (even in

a modiﬁ ed state), is only permitted with the written authorisation of the manufacturer.

Limitation of liability

All technical information, data and information for installation, connection and operation con-

tained in these operating instructions corresponds to the latest state at the time of printing and

takes into account our previous experience and our best available knowledge.

No claims can be derived from the details, illustrations and descriptions in these instructions.

The manufacturer assumes no responsibility for damage caused by failure to observe these

instructions, improper use, incompetent repairs, making unauthorised modiﬁ cations or for using

unapproved replacement parts.

Intended use

This appliance is intended for use only in private environments, not for commercial purposes.

This appliance is only intended for cutting natural hair. It may only be used with human hair,

not with artiﬁ cial or animal hair.

It is not intended for any other use or for uses extending beyond those stated. Claims of any

kind for damage arising as a result of non-intended use will not be accepted. The user is the

sole bearer of the risk.

IB_96126_SHBS5A1_LB7.indb 2IB_96126_SHBS5A1_LB7.indb 2 21.01.14 15:3721.01.14 15:37

3

SHBS 5 A1

GB

CY

Warnings used

The following warnings are used in these operating instructions:

DANGER

A warning at this risk level indicates an imminently hazardous situation.

If the hazardous situation is not avoided, it could lead to death or serious physical injury.

► Follow the instructions in this warning to avoid a fatality or serious personal injury.

WARNING

A warning of this risk level indicates a potentially hazardous situation.

Failure to avoid this hazardous situation could result in physical injury.

► Follow the instructions in this warning to prevent physical injury.

CAUTION

A warning of this risk level indicates potential damage to property.

Failure to avoid this situation could result in damage to property.

► Follow the instructions in this warning to prevent damage to property.

NOTE

►

A note indicates additional information that will assist you in handling the appliance.

IB_96126_SHBS5A1_LB7.indb 3IB_96126_SHBS5A1_LB7.indb 3 21.01.14 15:3721.01.14 15:37

4

SHBS 5 A1

GB

CY

Safety

This section provides you with important safety information regarding

handling of the appliance. The appliance complies with the statutory

safety regulations. Incorrect usage can lead to personal injury and

property damage.

Basic safety instructions

For safe handling of the appliance, follow the safety information below:

■ This appliance may be used by children aged 8 over and by persons

with reduced physical, sensory or mental capabilities or lack of expe-

rience and knowledge, provided that they are under supervision or

have been told how to use the appliance safely and are aware of the

potential risks. Children must not play with the appliance. Cleaning and

user maintenance tasks must not be carried out by children unless they

are supervised.

■ Before use, check the appliance for externally visible damage. Never

operate an appliance that is damaged. There is a risk of electrocution.

■ The appliance may no longer be used if there is any damage to the cable,

to the mains power adapter, the housing or any other components.

■ All repairs must be carried out by authorised specialist companies or

the Customer Service department. Improper repairs can pose signiﬁ cant

risks to the user. Warranty claims also become void.

■ Do not use the appliance with a defective cutter attachment or defective

comb attachment, since these may have sharp edges. There is a risk of

personal injury!

IB_96126_SHBS5A1_LB7.indb 4IB_96126_SHBS5A1_LB7.indb 4 21.01.14 15:3721.01.14 15:37

5

SHBS 5 A1

GB

CY

■ Defective components must always be replaced with original replacement

parts. Compliance with safety requirements can only be guaranteed if

original replacement parts are used.

■ Never operate the appliance unsupervised, and only in accordance

with the information on the nameplate.

■ Use only the mains power adapter provided when using mains power.

■ Remove the mains power adapter from the wall socket

- if a defect occurs,

- before cleaning the appliance,

- if you do not intend using the appliance for long periods,

- after every use.

When doing so, pull the mains power adapter itself and not the cable.

■ ATTENTION! Keep the appliance dry.

■ Do not use the appliance while taking a bath. Risk of fatal electrical

shocks!

■ Never submerge the appliance or the cable with mains power adapter

in water or other liquids.

■ If the appliance falls into the water, it is imperative that you pull the

mains power adapter out of the power socket before you reach into

the water.

■ Never touch the mains power adapter with wet hands, especially when

plugging it in or unplugging it. Risk of fatal electrical shocks!

IB_96126_SHBS5A1_LB7.indb 5IB_96126_SHBS5A1_LB7.indb 5 21.01.14 15:3721.01.14 15:37

6

SHBS 5 A1

GB

CY

■ The installation of a residual current circuit breaker with a rated tripping

current of no more than 30 mA oﬀ ers further protection from electric

shocks. Have the installation carried out only by a qualiﬁ ed electrician.

■ Check the mains power adapter and the hair and beard trimmer regu-

larly for any possible mechanical defects.

■ Ensure that the cable does not get jammed in cupboard doors or pulled

over hot surfaces. If this occurs, the cable insulation may be damaged.

■ Only plug the mains power adapter into an easily reachable power

socket so that you can pull the mains power adapter out of the power

socket quickly in an emergency.

■ Do not cover the mains power adapter to avoid impermissible warming.

IB_96126_SHBS5A1_LB7.indb 6IB_96126_SHBS5A1_LB7.indb 6 21.01.14 15:3721.01.14 15:37

7

SHBS 5 A1

GB

CY

Package contents

This appliance is supplied with the following components as standard:

▯ Hair and beard trimmer

▯ Charging station

▯ Mains power adapter

▯ Hair trimmer attachment

▯ Beard trimmer attachment

▯ Precision trimmer attachment

▯ Ear/nose hair trimmer attachment

▯ Shaver attachment

▯ Comb attachment for the hair trimmer attachment

▯ Comb attachment for the beard trimmer attachment

▯ Cleaning brush

▯ Scissors

▯ Comb

▯ Blade oil

▯ Storage pouch

▯ This operating manual

NOTE

►

Check the delivery for completeness and for signs of visible damage.

► If the delivery is incomplete, or is damaged due to defective packaging or through transpor-

tation, contact the Service Hotline (see chapter Service).

♦ Remove all appliance parts from the carton.

♦ Remove all packaging materials from the appliance.

DANGER

► Packaging material must not be used as a plaything. There is a risk of suﬀ ocation.

IB_96126_SHBS5A1_LB7.indb 7IB_96126_SHBS5A1_LB7.indb 7 21.01.14 15:3721.01.14 15:37

8

SHBS 5 A1

GB

CY

Spare Parts

You can also contact the Service Hotline if you need replacement parts (see chapter

Service).

Disposal of packaging

The packaging protects the appliance from transport damage.

Returning the packaging to the material cycle conserves raw materials and reduces the amount of

waste that is generated. Dispose of packaging material which is no longer needed in accordance

with applicable local regulations.

Appliance description

Figure A:

Hair trimmer attachment

2

Slide switch for cut length ﬁ ne adjustment

3

On/oﬀ switch

4

Charging indicator lamp

5

Charging station/holder with connecting socket for mains power adapter

Figure B:

6

Mains power adapter

Figure C:

7

Beard trimmer attachment

8

Precision trimmer attachment

9

Ear/nose hair trimmer attachment

10

Shaver attachment

11

Comb attachment for the hair trimmer attachment

12

Comb attachment for the beard trimmer attachment

IB_96126_SHBS5A1_LB7.indb 8IB_96126_SHBS5A1_LB7.indb 8 21.01.14 15:3721.01.14 15:37

9

SHBS 5 A1

GB

CY

Before ﬁ rst use

The hair and beard trimmer can be used as a battery-powered or mains-powered appliance.

Charging the batteries

The battery for the hair and beard trimmer should be charged for at least 90 minutes before ﬁ rst use.

♦ Connect the mains power adapter cable

6

to the hair and beard trimmer charging station

5

.

♦ Avoid damaging the appliance! Ensure that the appliance is switched oﬀ before charging the

battery.

♦ Plug the mains power adapter

6

(wide-range voltage 100–240 V) in a power socket complying

with the appliance speciﬁ cations.

♦ The charging progress is indicated by the charging indicator lamp

4

.

– charging indicator lamp ﬂ ashes red: the battery is discharged

– charging indicator lamp illuminates red: battery is being charged

– charging indicator lamp illuminates green: battery is fully charged

♦ Once the battery is fully charged, you can use the appliance for around 60 minutes without

connecting it to the power supply.

Operation with the mains power adapter

If your hair and beard trimmer stops working during shaving due to a discharged or weak battery,

you can continue shaving by plugging in the mains power adapter

6

.

♦ Plug the mains power adapter plug

6

into the socket on the underside of the hair and beard

trimmer.

♦ To avoid injuries and damage to the appliance, always switch the appliance oﬀ before con-

necting it to the power supply.

♦ Plug the mains power adapter

6

(wide-range voltage 100–240 V) in a power socket complying

with the appliance speciﬁ cations.

♦ After 1–2 seconds, you can switch the appliance on by pressing the ON/OFF switch

3

.

If the appliance does not start immediately, switch it oﬀ again and wait around 1 minute

before switching it on again.

♦ If you want to charge the battery without using the charging station

5

in this manner you can

only do this when the appliance is switched oﬀ .

IB_96126_SHBS5A1_LB7.indb 9IB_96126_SHBS5A1_LB7.indb 9 21.01.14 15:3721.01.14 15:37

10

SHBS 5 A1

GB

CY

Oiling the cutting attachments

We recommend that you oil the hair trimmer , beard trimmer

7

and precision trimmer attach-

ments

8

before ﬁ rst use and after cleaning to ensure full mobility.

♦ To do this, simply apply a couple of drops of blade oil (accessory) between the blades, and

then distribute it evenly.

♦ Wipe oﬀ any access oil with a soft cloth. Use only non-corrosive oils such as sewing machine oil.

Handling and use

Attaching/changing the cutter attachments

WARNING

► Switch oﬀ the appliance before attaching or changing the cutter attachments.

There is a risk of personal injury!

♦ Press your thumbs forwards against the cutter attachment to release it from its holder

(see Fig. D). Then remove the cutter attachment from the appliance.

♦ To attach the cutter attachment, insert the lower plug-in tab into the opening on the appliance

(see Fig. E).

♦ Then press the upper part of the cutter attachment onto the appliance until it audibly clicks into

place and is ﬁ rmly seated (see Fig. F).

Attaching/changing the comb attachments

Comb attachment for the hair trimmer attachment

The comb attachment

11

has settings for 6 diﬀ erent cut lengths (13 mm/15 mm/17 mm/

19 mm/21 mm/23 mm).

♦ Attach the comb attachment

11

from the front onto the hair trimmer attachment and press

the rear end ﬁ rmly until it clicks into place.

♦ To remove the comb attachment

11

, release the lower end and pull it forwards oﬀ the appliance.

IB_96126_SHBS5A1_LB7.indb 10IB_96126_SHBS5A1_LB7.indb 10 21.01.14 15:3721.01.14 15:37

11

SHBS 5 A1

GB

CY

Comb attachment for the beard trimmer attachment

The comb attachment

12

has settings for 6 diﬀ erent cut lengths (4 mm/6 mm/9 mm/12 mm/

15 mm/18 mm).

♦ Attach the comb attachment

12

from the front onto the beard trimmer attachment

7

and press

it down.

♦ To remove the comb attachment

12

press it forwards oﬀ the appliance.

Hair trimmer attachment

NOTE

►

Any hair to be cut should be clean and dry.

► Brush the hair carefully through to remove any knots.

► Place a hairdressing cape or cloth around your neck and throat to avoid cut hair ends

falling inside your collar.

► Start by setting the comb attachment

11

to a longer length and reduce this in stages while

cutting the hair.

► Please note that the corresponding cut length will only be achieved if the slide switch

2

is set to position 3 and the appliance is being held at right angles to the skin surface.

♦ Switch the hair and beard trimmer on by pressing the ON/OFF switch

3

.

♦ Run the hair and beard trimmer slowly through your hair.

♦ Hold the appliance so that the comb attachment

11

is as ﬂ at as possible.

♦ Always cut from your neck towards the top of your head, or from your forehead and temples

upwards towards the middle of your head.

♦ Use the hair trimmer attachment without the comb attachment

11

to cut the hair very short.

♦ You can use the slide switch

2

to ﬁ nely adjust the cut length in three steps.

IB_96126_SHBS5A1_LB7.indb 11IB_96126_SHBS5A1_LB7.indb 11 21.01.14 15:3721.01.14 15:37

12

SHBS 5 A1

GB

CY

Beard trimmer attachment

NOTE

►

Comb the beard in the direction of growth to remove any knots.

► Start by setting the comb attachment

12

to a longer length and reduce this in stages while

cutting the hair.

► Please note that the corresponding cut length will only be achieved if the slide switch

2

is

set to position 3 and the appliance is being held at right angles to the skin surface.

♦ Cut the beard against the beard growth direction (upwards from chin to ear). Trim ﬁ rst one

side and then other.

♦ Use the beard trimmer attachment

7

without the comb attachment

12

to cut the beard very

short or to add shape or trim a moustache.

♦ You can use the slide switch

2

to ﬁ nely adjust the cut length in three steps.

Precision trimmer attachment

♦ Use the precision trimmer attachment

8

to add shape to a moustache, mutton chops, sideburns

or eyebrows.

♦ Lay the edge of the precision trimmer attachment

8

at the required level of the hair growth

and move the appliance downwards.

Ear/nose hair trimmer attachment

♦ Use the ear/nose hair trimmer

9

if you want to remove ear or nose hair.

♦ Guide the metal end of the ear/nose hair trimmer attachment

9

slowly into the nostril or ear.

♦ Move the appliance slowly in a circular motion to cut the hair.

Shaver attachment

♦ Use the shaver attachment

10

for a dry shave.

♦ Hold the appliance at right angles to the skin surface and move it gently over your face.

♦ Shave in the opposite direction to the beard growth. In complicated areas, such as the chin,

pull the skin tight to achieve a better result.

IB_96126_SHBS5A1_LB7.indb 12IB_96126_SHBS5A1_LB7.indb 12 21.01.14 15:3721.01.14 15:37

13

SHBS 5 A1

GB

CY

Cleaning and care

DANGER

Danger to life due to electric shock!

► Pull the mains power adapter

6

out of the power socket before cleaning the appliance.

► Never touch the mains power adapter

6

with wet hands, especially when plugging it in or

unplugging it.

► Always keep the mains power adapter

6

and the cable dry.

CAUTION

Possible damage to the appliance.

► The hair and beard trimmer may never be immersed in water or other liquids for cleaning,

since the appliance is not watertight. If this is done, live parts (batteries) can be damaged.

► Do not use aggressive or abrasive cleaning agents, as these can damage the upper surfaces.

► Clean the housing only with a soft damp cloth and a mild detergent.

♦ Switch the hair and beard trimmer oﬀ by pressing the ON/OFF switch

3

.

♦ Disconnect the cable from the appliance and pull the mains power adapter

6

out of the

power socket.

♦ If any comb attachment (

11

or

12

) is attached, remove this ﬁ rst.

♦ Wash the comb attachment (

11

or

12

) if required under running water.

♦ Dry the comb attachment (

11

or

12

) thoroughly afterwards.

♦ Press your thumbs against the cutter attachment to release it from its holder (see Fig. D).

♦ Use the cleaning brush supplied to remove any hair residue from the cutter attachment.

♦ Once you have completed cleaning, plug the cutter attachment plug-in tab back into the

mounting opening on the appliance (see Fig. E).

♦ Push the cutter attachment back onto the appliance by pressing lightly from above (see Fig. F).

NOTE

►

In order to reduce friction, occasionally apply a couple of drops of blade oil (accessory)

between the blades, and then distribute it evenly. You can also use any non-corrosive oil

(e.g. sewing machine oil). Wipe oﬀ any access oil with a soft cloth.

IB_96126_SHBS5A1_LB7.indb 13IB_96126_SHBS5A1_LB7.indb 13 21.01.14 15:3721.01.14 15:37

14

SHBS 5 A1

GB

CY

Cleaning the shaver attachment

CAUTION

Possible damage to the appliance.

► Do not remove the shaving foil from the foil holder and do not clean this with the cleaning brush.

♦ Remove the shaver attachment

10

from the appliance.

♦ Press the buttons at the side of the shaver attachment

10

and pull oﬀ the shaving foil holder.

Hold the shaving foil holder only by the sides and do not press on the foil itself.

♦ Clean the cutting blades with the supplied cleaning brush.

♦ Clean the shaving foil in the shaving foil holder by holding it under running water and allow

it to dry oﬀ completely before reattaching it to the shaver attachment

10

.

♦ Replace the shaving foil holder onto the shaver attachment

10

. During replacement ensure that

the ﬁ xing tabs on the shaving foil holder are inserted into the corresponding openings on the

shaver attachment

10

, and then press the shaving foil holder gently down until it audibly clicks

into place.

NOTE

►

Every now and again, apply a couple of drops of blade oil (accessory) between the blades,

and then distribute it evenly. Attach the shaver attachment

10

to the appliance and allow the

appliance to run for a few seconds without using it. Wipe oﬀ any access oil with a soft cloth.

Cleaning the ear/nose hair trimmer attachment

♦ Remove the ear/nose hair trimmer attachment

9

from the appliance.

♦ Clean the ear/nose hair trimmer attachment

9

under running water and allow it to dry

completely before using it again.

IB_96126_SHBS5A1_LB7.indb 14IB_96126_SHBS5A1_LB7.indb 14 21.01.14 15:3721.01.14 15:37

15

SHBS 5 A1

GB

CY

Disposal

Disposal of the appliance

Never dispose of the appliance in the normal domestic waste. This product is

subject to the provisions of European Directive 2012/19/EU (Waste Electrical

and Electronic Equipment).

Dispose of the appliance via an approved disposal company or your municipal waste facility.

Please observe the currently applicable regulations. Please contact your waste disposal centre

if you are in any doubt.

NOTE

►

Before disposing of the appliance it is essential to ﬁ rst remove the battery.

CAUTION

►

Removal of the battery requires a certain amount of manual dexterity; otherwise there is a

risk of injury! If you have no experience in using tools, you should entrust the task to some-

one who is competent to do the job properly.

► Ensure that the battery does not get damaged during removal. There is a risk of ﬁ re!

► The removed battery may not be reused.

► Never short-circuit the battery. The contacts on the removed battery should not be connected

by an metallic objects. The battery can overheat and explode.

► WARNING! Only remove the battery for disposal of the appliance. Removal will destroy the

appliance. Never operate an appliance that has been dismantled.

♦ Disconnect the appliance from the power supply.

♦ Switch on the appliance and let it run until the battery is fully discharged.

♦ Remove the cutter attachment from the appliance (see chapter Attaching/changing the cutter

attachments)

♦ There are three screws on the rear of the appliance. Two of the screws are in the mounting

opening of the appliance.

♦ Loosen both the screws with a Philips screwdriver.

IB_96126_SHBS5A1_LB7.indb 15IB_96126_SHBS5A1_LB7.indb 15 21.01.14 15:3821.01.14 15:38

16

SHBS 5 A1

GB

CY

♦ Remove the rear side of the appliance.

♦ Use a diagonal cutter/ﬂ at-head screwdriver to disconnect the battery from the circuit board.

Remove the battery. Take the battery and the appliance separately to appropriate disposal

facilities.

Disposal of batteries

Used batteries may not be disposed of in household waste. All consumers are statutorily required

to dispose of batteries at a collection point provided by their local community or at a retail store.

The purpose of this obligation is to ensure that batteries are disposed of in a non-polluting manner.

Only dispose of batteries when they are fully discharged.

IB_96126_SHBS5A1_LB7.indb 16IB_96126_SHBS5A1_LB7.indb 16 21.01.14 15:3821.01.14 15:38

17

SHBS 5 A1

GB

CY

Appendix

Technical details

Mains power adapter PTB-045100EU

Input voltage 100–240 V ∼, 50/60 Hz

Output voltage 4.5 V

Output current 1000 mA

Protection class

II /

Hair and beard trimmer

Input voltage 4.5 V

Input current 1000 mA

Rechargeable battery 3.7 V/700 mAh Li-ion battery

Environmental temperature 5°C up to 35°C

Notes on the Declaration of Conformity

With regard to conformity with essential requirements and other relevant provi-

sions, this appliance complies with the guidelines of the Electromagnetic Com-

patibility Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC.

The full original Declaration of Conformity is available from the importer.

Warranty

The warranty for this appliance is for 3 years from the date of purchase. The appliance has been

manufactured with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the case of a warranty claim, please make

contact by telephone with our Customer Service Department. Only in this way can a post-free

despatch for your goods be assured.

IB_96126_SHBS5A1_LB7.indb 17IB_96126_SHBS5A1_LB7.indb 17 21.01.14 15:3821.01.14 15:38

Pagina se încarcă...

Silvercrest 96126 Operating Instructions Manual

Acest manual este potrivit și pentru

Silvercrest 96126 Operating Instructions Manual

Lucrări înrudite

Alte documente