Smithco Super Star LE Instrucțiuni de utilizare

Tip
Instrucțiuni de utilizare
Product Support: Hwy SS & Poplar Ave; Cameron WI 54822
1-800-891-9435 productsupport@smithco.com
Operators
Super Star LE
42-400-A
June 2009
Introduction Service Diagrams
CONTENTS
Introduction.................................................... 1-12
Introduction ...................................................................................... 1
Symbols.........................................................................................2-3
Safe Practices.................................................................................. 4
Super Star Diesel Specifications....................................................... 5
Euro Star Specifications .................................................................. 6
Setup ............................................................................................... 7
Controls & Instruments Euro Star ..................................................... 8
Controls & Instruments Super Star Diesel......................................... 9
Operation ........................................................................................10
Daily Checklist ................................................................................11
How To Rake A Sand Trap ..............................................................12
Service............................................................... 13
Battery ............................................................................................13
Other .................................................................. 14
Declaration of Conformity.................................................................14
Limited Warranty .................................................... Inside Back Cover
1
Introduction
Information needed when ordering replacement parts:
1. Model Number of machine
2. Serial Number of machine
3. Name and Part Number of part
4. Quantity of parts
INTRODUCTION
Thank you for purchasing a
SmithcoSmithco
SmithcoSmithco
Smithco
product.
Read this manual and all other manuals pertaining to the Bunker Rake carefully as they contain safety, operat-
ing, assembly and maintenance instructions. Failure to do so could result in personal injury or equipment dam-
age.
Keep manuals in a safe place after operator and maintenance personnel have read them. Right and left sides
are from the operators seat, facing forward.
All
SmithcoSmithco
SmithcoSmithco
Smithco machines have a Serial Number and Model Number. Both numbers are needed when ordering
parts. Refer to engine manual for placement of engine serial number.
The serial number plate on the Super Rakes is located on the right side main frame.
The serial number plate for the Super Star is located on the rear axle.
For easy access record your Serial and Model numbers here.
2
Introduction
SYMBOLS
Park Brake
Park Brake
Release
Hydraulic Oil
Level
Choke - OpenChoke - ClosedHand Throttle
Hour Meter Hour Meter Fuse
Glow PlugGlow Plug - OffGlow Plug - On
RPM Gasoline Diesel
Water
Temperature
Temperature
Light
Engine Oil
Engine - Stop Engine - Start Engine - Run
No Electrical
Power
Electrical Power
Read
Operators
Manual
3
Introduction
SYMBOLS
No Smoking Moving Parts
Manual
Operation
Pinch Point
Step Hot Surface
Hydraulic Fluid
Penetration
Lift Arm Tractor
Engage Disengage PTO
Ground Speed Fast Slow
H
High
L
Low
F
Forward
R
Reverse
N
Neutral
Warning
Danger
Caution
Up/RaiseDown/LowerUp/Down Arrow
SAFE PRACTICES
1. It is your responsibility to read this manual and all publications associated with this machine (engine,
accessories and attachments).
2. Never allow anyone to operate or service the machine or its attachments without proper training and
instructions. Never allow minors to operate any equipment.
3. Learn the proper use of the machine, the location and purpose of all the controls and gauges before you
operate the equipment. Working with unfamiliar equipment can lead to accidents.
4. Wear all Personal Protective Equipment (PPE) on your head, eyes, ears, hands and feet. Operate the
machine only in daylight or in good artificial light.
5. Inspect the area where the equipment will be used. Pick up all debris you can find before operating.
Beware of overhead obstructions and underground obstacles. Stay alert for hidden hazards.
6. Never operate equipment that is not in perfect working order or without decals, guards, shields, or other
protective devices in place.
7. Never disconnect or bypass any switch.
8. Carbon monoxide in the exhaust fumes can be fatal when inhaled, never operate a machine without
proper ventilation.
9. Fuel is highly flammable, handle with care.
10. Keep engine clean. Allow the engine to cool before storing and always remove the ignition key.
11. After engine has started machine must not move. If movement is evident, the neutral mechanism is not
adjusted correctly. Shut engine off and readjust so the machine does not move when in neutral position.
13. Never use your hands to search for oil leaks. Hydraulic fluid under pressure can penetrate the skin and
cause serious injury.
14. This machine demands your attention. To prevent loss of control or tipping of the vehicle:
A. Use extra caution in backing up the vehicle. Ensure area is clear.
B. Do not stop or start suddenly on any slope.
C. Reduce speed on slopes and in sharp turns. Use caution when changing directions on slopes.
D. Stay alert for holes in the terrain and other hidden hazards.
15. Before leaving operator’s position for any reason:
A. Disengage all drives.
B. Lower all attachments to the ground.
C. Set park brake.
D. Shut engine off and remove the ignition key.
16. Keep hands, feet and clothing away from moving parts. Wait for all movement to stop before you clean,
adjust or service the machine.
17. Keep the area of operation clear of all bystanders.
18. Never carry passengers.
19. Stop engine before making repairs/adjustments or checking/adding oil to the crankcase.
20. Use parts and materials supplied by
SmithcoSmithco
SmithcoSmithco
Smithco only. Do not modify any function or part.
hese machines are intended for professional maintenance on golf courses, sports turf, and any other
area maintained turf and related trails, paths and lots. No guaranty as to the suitability for any task is
expressed or implied.
SPECIFICATION SUPER STAR LE
WEIGHTS AND DIMENSIONS
Length 64" (163 cm)
Width 57" (145 cm)
Height 47" (119 cm)
Wheel Base 51" (104 cm)
Weight 950 lbs. (451 kg)
SOUND LEVEL
At ear level 85 dB
At 3 ft. (0.914 m) 83 dB
At 30 ft. (9.14 m) 73 dB
ENGINE
Make Briggs and Stratton Vanguard
Model# 303447
Type / Spec # 1131E1
Horsepower 16 hp (12 kW)
Fuel Unleaded 87 Octane (min)
Cooling System Air Cooled
Lubrication System Pressure Type
Alternator 16 AMP
SPEED
Forward Speed 0 to 11 m.p.h. (0-18 kph)
Reverse Speed 0 to 5 m.p.h. (0-8 kph)
TIRES & WHEELS
All Tires **Three 22 x 11 x 10.00 Knobby Tires
8 psi (.55 bar)
BATTERY Automotive Type 45-12 Volt
BCI Group Size 45
Cold Cranking Amps 480
Ground Terminal Polarity Negative (-)
Maximum Length 9" (23 cm)
Maximum Width 5.38" (14 cm)
Maximum Height 9" (23 cm)
FLUID CAPACITY
Crankcase Oil See Engine Manual
Fuel 20 quarts (19 liters)
Hydraulic Fluid 20 quarts (19 liters)
Grade of Hydraulic Fluid SAE 10W-40 API Service
SJ or Higher Motor Oil
** Front tire fluid filled to 80 lbs. (36 kg) total.
45.5 pints of windshield washer fluid or equivalent.
6
Introduction
SETUP
The Bunker Rakes arrive from
SmithcoSmithco
SmithcoSmithco
Smithco with some assembly required before service.
1. Set park brake. Push the brake down past center and
the park brake is engaged.
2. Rear wheel mounting. Block front tire. Jack up rear of
machine being careful not to damage underside of
machine. Place wheel on hub lining up bolt holes. Use
the ten lug nuts provided. Then torque to 64 - 74 ft/lb
(87-100 Nm) using a cross pattern. Retorque after the
first 10 hours and every 200 hours thereafter. Lower
machine to ground and remove blocks and jack.
3. Install steering wheel (Ref 1) on machine. Put steer-
ing wheel onto shaft (Ref 3) Line up holes and insert
1
/4 x 2" Roll Pin (Ref 2) into wheel shaft. Tighten set
screw.
4. Check the tire pressure. The tire pressure should be
8 psi (0.55 bar)
5. Battery not furnished. Install an automotive type 45 -
12 volt; 480 cold cranking amps (minimum) battery in
the battery box of the Super Star. This is a negative
grounding system. Attach the battery hold-downs.
Then attach red positive (+) cable (A) to positive
terminal. Slide rubber boot over the positive terminal
to prevent shorts. Attach black negative (-) cable (B) to
the negative terminal.
Connecting battery cables to the wrong post
could result in personal injury and/or damage
to the electrical system. Make sure battery and
cables do not interfere or rub on any moving
part. Connect the red positive (+) cable (A) to
the battery first. When disconnecting remove
the black negative (-) cable (B) first.
6. Check engine oil and add as necessary. See engine manual for recommended motor oil. DO NOT
OVERFILL.
7. Fill Gas Tanks with Unleaded 87 Octane gasoline (minimum).
.
Fuel is flammable. Caution must be used when storing or handling it. Do not fill fuel tank
while engine is operating or in an enclosed area. Fumes are explosive and dangerous to
inhale. DO NOT SMOKE while filling the fuel tank. DO NOT OVERFILL.
8. Check hydraulic oil level on the tank. The level should be
2 -2
1
/2"(5 - 6.35 cm) from top of tank. If level is
low, add SAE 10W-40 API Service SJ or higher motor oil.
9. Machine should be greased before starting.
10. Read operating instructions before starting machine.
7
Introduction
CONTROLS & INSTRUMENTS SUPER STAR LE
INSTRUMENTS LOCATED ON THE CONTROL PANEL
A. Electric On/Off Valve Switch - Toggle switch that turns 2 Wheel to
3 Wheel Drive. For 42-117 Optional Electric Valve Kit.
B. Oil Light - The oil light should come on when ignition is on without
engine operating. The oil light will light when the oil pressure is low.
If oil light should come on, shut off engine immediately and find the
cause.
C. Ignition Switch - The ignition switch has three positions: Off-Run-
Start.
D. Choke - Pull choke control knob up to close choke plate when
starting a cold engine. A warm engine may not require "choking" to
start.
E. Hand Throttle - The hand throttle is used to regulate engine
speed.
F. Blower - This is an optional switch that comes with the Leaf and Debris Blower.
G. Light - This is an optional switch that comes with the Light Kit.
STEERING
Acquaint yourself with the steering before operating the machine. This machine is equipped with a tilt steering mecha-
nism. The lever to tilt the steering wheel is located at bottom of rubber boot on steering column. Hold the lever down and
adjust the steering wheel to a comfortable position.
RAKE LIFT LEVER
This lever (H) raises and lowers all rear attachments. To raise push forward, to
lower pull back. Release the lever when attachment is in proper position and
lever will return to neutral.
LIFT ASSEMBLY LEVER
This lever (J) raises and lowers all attachments under the center of the ma-
chine. To raise push forward, to lower pull back. Release the lever when at-
tachment is in proper position and lever will return to neutral.
SEAT ADJUSTMENT
Seat adjustment lever is located under front of seat on left side. It allows seat
adjustment forward or backward for operator's comfort. The seat also has the
start safety switch in it. To start the Super Star the operator must be sitting on the seat.
RIGHT FLOORBOARD
Foot Pedal controls forward and reverse motion. Pushing down on the front of
pedal (K) will give you a forward motion and pushing down on rear pedal (L)
will give you a reverse motion. When pedal is released the hydrostatic trans-
mission centers and stops the vehicle. Ground speed is proportional to how far
the foot pedal is depressed.
HOUR METER
Located on the right front fiberglass cowling. The hour meter indicates hours of machine operation. The hour meter
operates when ignition switch is on.
8
Introduction
OPERATION AND DAILY CHECK LIST
STARTING ENGINE
Before operating this machine, become familiar with all controls and functions of these units. Also complete all
maintenance requirements and read all safety warnings. By knowing the machine thoroughly, how it operates
and by doing the prescribed maintenance steps, you can expect relatively trouble-free operation for years to
come.
1. Make sure the fuel flow valve, located on the fuel tank, is “ON.”
2. Set park brake. Start safety switch is on the park brake.
3. The ignition switch is a three position.
Insert key (A) and turn clockwise
until engine starts (C). Release key and it will return to run position (B).
Use choke and hand throttle as necessary.
4. Allow engine to idle and warm up a few minutes before selecting a
direction of travel.
5. To shut off engine on all gas machines turn key to the stop position.
COLD WEATHER STARTING
When attempting to start the engine in cold weather, the oil in the hydrostat pump may provide too much resis-
tance to start a cold machine.
Before attempting to start the engine in cold weather, disengage the drive belt to the hydrostat by pushing
down the idler lever until it catches in the notch on the latching lever. Start engine and allow it to warm up with
no load. When the engine is warm, shut off engine. Push down on the latching lever until the idler is released.
Engine must be stopped when the drive belt is engaged. If the engine is running when the belt is en-
gaged, the vehicle may move suddenly, injuring you and/or bystanders.
Always stop the engine before reengaging the drive belt. The sudden application of power to the
hydrostat may cause serious damage the pump, the engine or both.
9
Introduction
DAILY CHECKLIST
Use all procedures and parts prescribed by the manufacturer's. Read the engine manual
before operation.
The suggested maintenance checklist is not offered as a replacement for the manufacturer’s but as a supple-
ment. You must adhere to guidelines established by manufacturer for warranty coverage. In adverse conditions
such as dirt, mud or extreme temperatures, maintenance should be more frequent.
DAILY CHECKLIST
1. Check park brake adjustment. Adjust as required.
2. Check engine oil level. Add as needed. DO NOT OVERFILL.
3. Tire pressure should be 8 psi (0.55 bar) maximum.
4. Inspect electrical system for loose connections or frayed wiring, including battery cables. Replace any
faulty equipment or tighten if loose.
5. Check hardware for loose or missing nuts, bolts, screws, etc., and tighten or replace as needed.
6. Inspect hydraulic lines for damage or leaks. Never use hands to inspect leaks.
7. Check hydraulic oil level on the tank. The level should be
2 -2
1
/2"(5 - 6.35 cm) from top of tank. If level is
low, add SAE 10W-40 API Service SJ or higher motor oil.
8. Inspect steering, throttle and shift linkages for good hookups and clear travel.
9. Check anti-vibration mounts on engine frame.
10. Check controls for smooth, proper working operation. Lubricate as needed.
11. Remove debris from engine compartment
10
Service
HOW TO RAKE A SAND TRAP
HOW TO RAKE A SAND TRAP
View bunker to determine the most efficient pattern to follow so that rake pattern and configuration of bunker
will flow in same general direction and look attractive.
Enter bunker at its lowest point. Perhaps drain area or another point where “lip” of the trap is minimal.
Operate at 2-4 m.p.h. (3-6.5 kph) for best raking results. Control speed with hydraulic pedal.
Once fully inside bunker, lower rear rake and proceed forward as described above.
First pass should be directly down center of trap. This helps avoid ex-
tremely sharp turns that will spoil sands’ appearance.
Once at far end, turn machine and
drive down one side
of trap and come
back up other side.
Grass or other material
may build up on rake
tines as machine passes
“enter/exit” point in Figure
1. Lift rake briefly while still
moving forward.
Do not rake closer than 6" (15
cm) to edge of trap.
Do not rake slopes in trap. The
weight of machine will pull sand down.
Use cultivator or other center mounted accessories only as necessary for compacted sand. Frequent use will
leave sand too soft and objectionable to some golfers.
Use front mounted plow to push sand to desired locations within trap.
After exiting trap, secure machines in accordance with practices described in this manual. Rake trap edges,
slopes and “enter /exit” area with a hand rake.
After returning to maintenance area, thoroughly clean machine, check fluids, and lubricate as advised in this
manual.
11
Diagrams
BATTERY
BATTERY
Batteries normally produce explosive gases which can cause personal injury. Do not allow flames, sparks or any ignited
object to come near the battery. When charging or working near battery, always shield your eyes and always provide
proper ventilation.
Battery cable should be disconnected before using "Fast Charge".
Charge battery at 15 amps for 10 minutes or 7 amps for 30 minutes. Do not exceed the recommended charging rate. If
electrolyte starts boiling over, decrease charging.
Always remove grounded (-) battery clamp first and replace it last. Avoid hazards by:
1. Filling batteries in well-ventilated areas.
2. Wear eye protection and rubber gloves.
3. Avoid breathing fumes when electrolyte is added.
4. Avoid spilling or dripping electrolyte.
Battery Electrolyte is an acidic solution and should be handled with care. If electrolyte is splashed on
any part of your body, flush all contact areas immediately with liberal amounts of water. Get medical
attention immediately.
JUMP STARTING
Use of booster battery and jumper cables. Particular care should be used when connecting a booster
battery. Use proper polarity in order to prevent sparks.
To jump start (negative grounded battery):
1. Shield eyes.
2. Connect ends of one cable to positive (+) terminals of
each battery, first (A) then (B).
3. Connect one end of other cable to negative (-)
terminal of "good" battery (C).
4. Connect other end of cable (D) to engine block on
unit being started (NOT to negative (-) terminal of
battery)
To prevent damage to other electrical components on unit
being started, make certain that engine is at idle speed
before disconnecting jumper cables.
DECLARATIONOFCONFORMITYƒʪʫʶʸʤˀʤˉʰ˔ʯʤˁˎʽ˃ʦʫ˃ˁ˃ʦʰʫƒPROHLÁŠENÍOSHODƒOVERENSSTEMMELSESERKLÆRINGƒ
CONFORMITEITSVERKLARINGƒVASTAVUSDEKLARATSIOONƒVAATIMUSTENMUKAISUUSVAKUUTUSƒDECLARATIONDE
CONFORMITEƒKONFORMITÄTSERKLÄRUNGƒȴȸȿёɇȸɇɉɀɀɃɆɌёɇȸɇƒMEGFELELSSÉGINYILATKOZATƒDICHIARAZIONEDI
CONFORMITÀƒATBILST5BASDEKLARCIJAƒATITIKTIESDEKLARACIJAƒDIKJARAZZJONITALͲKONFORMITÀƒDEKLARACJA
ZGODNO_CIƒDECLARAÇÃODECONFORMIDADEƒDECLARAfIEDECONFORMITATEƒVYHLÁSENIEOZHODEƒIZJAVAOSKLADNOSTI
ƒDECLARACIÓNDECONFORMIDADƒDEKLARATIONOMÖVERENSSTÄMMELSE
Business name and full address of the manufacturer ƒ Ɍɴɪɝɨɜɫɤɨ ɢɦɟ ɢ ɩɴɥɟɧ ɚɞɪɟɫ ɧɚ ɩɪɨɢɡɜɨɞɢɬɟɥɹ ƒ Obchodní jméno a plná adresa
výrobce ƒ Producentens firmanavn og fulde adresse ƒ Bedrijfsnaam en volledig adres van de fabrikant ƒ Tootja ärinimi ja täielik aadress ƒ
Valmistajan toiminimi ja täydellinen osoite ƒ Nom commercial et adresse compl ète du fabricant ƒ Firmenname und vollständige Adresse des
Herstellers ƒ ǼʌȦȞȣȝȓĮ țĮȚ IJĮȤȣįȡȠȝȚțȒ įȚİȪșȣȞıȘ țĮIJĮıțİȣĮıIJȒ ƒ A gyártó üzleti neve és teljes címe ƒ Ragione sociale e indirizzo completo
del fabbricante ƒ UzƼƝmuma nosaukums un pilna ražotƗja adrese ƒ Verslo pavadinimas ir pilnas gamintojo adresas ƒ Isem kummerƛjali u
indirizz sƫiƫ tal-fabbrikant ƒ Nazwa firmy i peány adres producenta ƒ Nome da empresa e endereço completo do fabricante ƒ Denumirea
comercială úi adresa completă a producătorului ƒ Obchodný názov a úplná adresa výrobcu ƒ Naziv podjetja in polni naslov proizvajalca ƒ
Nombre de la empresa y dirección completa del fabricante ƒ Tillverkarens företagsnamn och kompletta adress
Smithco Inc.
34 West Avenue
Wayne, PA USA
19087-3311
Product Code ƒ Ʉɨɞ ɧɚ ɩɪɨɞɭɤɬɚ ƒ Kód výrobku ƒ Produktkode ƒ Productcode ƒ Toote kood ƒ Tuotekoodi ƒ Code produit ƒ Produktcode ƒ
ȀȦįȚțȩȢ ʌȡȠȧȩȞIJȠȢ ƒ Termékkód ƒ Codice prodotto ƒ Produkta kods ƒ Produkto kodas ƒ Kodiƛi tal-Prodott ƒ Kod produktu ƒ Código do Produto ƒ
Cod
p
rodus ƒ Kód v
ý
robku ƒ Oznaka
p
roizvoda ƒ Códi
g
o de
p
roducto ƒ Produktkod
43Ͳ001ͲB
Machine Name ƒ ɇɚɢɦɟɧɨɜɚɧɢɟ ɧɚ ɦɚɲɢɧɚɬɚ ƒ Název stroje ƒ Maskinnavn ƒ Machinenaam ƒ Masina nimi ƒ Laitteen nimi ƒ Nom de la machine
ƒ Maschinenbezeichnung ƒ ȅȞȠȝĮıȓĮ ȝȘȤĮȞȒȝĮIJȠȢ ƒ Gépnév ƒ Denominazione della macchina ƒ IekƗrtas nosaukums ƒ Mašinos pavadinimas ƒ
Isem tal-Magna ƒ Nazwa urządzenia ƒ Nome da Máquina ƒ Numele echipamentului ƒ Názov stroja ƒ Naziv stroja ƒ Nombre de la máquina ƒ
Maskinens namn
Smithco Diesel Super Star
Designation ƒ ɉɪɟɞɧɚɡɧɚɱɟɧɢɟ ƒ Oznaþení ƒ Betegnelse ƒ Benaming ƒ Nimetus ƒ Tyyppimerkintä ƒ Pažym ơjimas ƒ Bezeichnung ƒ
ȋĮȡĮțIJȘȡȚıȝȩȢ ƒ Megnevezés ƒ Funzione ƒ ApzƯmƝjums ƒ Lithuanian ƒ Denominazzjoni ƒ Oznaczenie ƒ Designação ƒ SpecificaĠie ƒ Oznaþenie ƒ
Namen stro
j
a ƒ Descri
p
ción ƒ Betecknin
g
BunkerRake
Serial Number ƒ ɋɟɪɢɟɧ ɧɨɦɟɪ ƒ Sériové þíslo ƒ Serienummer ƒ Serienummer ƒ Seerianumber ƒ Valmistusnumero ƒ Numéro de série ƒ
Seriennummer ƒ ȈİȚȡȚĮțȩȢ ĮȡȚșȝȩȢ ƒ Sorozatszám ƒ Numero di serie ƒ SƝrijas numurs ƒ Serijos numeris ƒ Numru Serjali ƒ Numer seryjny ƒ
Número de Série ƒ Număr de serie ƒ Sériové þíslo ƒ Seri
j
ska številka ƒ Número de serie ƒ Serienummer
14185
Engine ƒ Ⱦɜɢɝɚɬɟɥ ƒ Motor ƒ Motor ƒ Motor ƒ Mootor ƒ Moottori ƒ Moteur ƒ Motor ƒ ȂȘȤĮȞȒ ƒ Modulnév ƒ Motore ƒ DzinƝjs ƒ Variklis ƒ Saƫƫa Netta
Installata ƒ Silnik ƒ Motor ƒ Motor ƒ Motor ƒ Motor ƒ Motor ƒ Motor
Briggs&StrattonDiahatsu850D
Net Installed Power ƒ ɇɟɬɧɚ ɢɧɫɬɚɥɢɪɚɧɚ ɦɨɳɧɨɫɬ ƒ ýistý instalovaný výkon ƒ Installeret nettoeffekt ƒ Netto ge ïnstalleerd vermogen ƒ
Installeeritud netovõimsus ƒ Asennettu nettoteho ƒ Puissance nominale nette ƒ Installierte Nettoleistung ƒ ȀĮșĮȡȒ İȖțĮIJİıIJȘȝȑȞȘ ȚıȤȪȢ
ƒ Nettó
beépített teljesítmény ƒ Potenza netta installata ƒ ParedzƝtƗ tƯkla jauda ƒ Grynoji galia ƒ Wisa’ tal-Qtugƫ ƒ Moc zainstalowana netto ƒ Pot ência
instalada ƒ Puterea instalată netă ƒ ýistý inštalovaný výkon ƒ Neto vgrajena moþ ƒ Potencia instalada neta ƒ Nettoeffekt
18kW
Conforms to Directives ƒ ȼ ɫɴɨɬɜɟɬɫɬɜɢɟ ɫ ɞɢɪɟɤɬɢɜɢɬɟ ƒ SplĖuje podmínky smČrnic ƒ Er i overensstemmelse med direktiver ƒ Voldoet aan de
richtlijnen ƒ Vastab direktiividele ƒ Direktiivien mukainen ƒ Conforme aux directives ƒ Entspricht Richtlinien ƒ ǹțȠȜȠȣșȒıIJİ ʌȚıIJȐ IJȚȢ ȅįȘȖȓİȢ ƒ
Megfelel az irányelveknek ƒ Conforme alle Direttive ƒ Atbilst direktƯvƗm ƒ Atitinka direktyvǐ reikalavimus
ƒ Valutazzjoni tal-Konformità ƒ
Dyrektywy związane ƒ Cumpre as Directivas ƒ Respectă Directivele ƒ Je v súlade so smernicami ƒ Skladnost z direktivami ƒ Cumple con las
Directivas ƒ U
pp
f
y
ller direktiv
2006/42/EC;
2000/14/ECAnnexVI.Part1
Conformity Assessment ƒ Ɉɰɟɧɤɚ ɡɚ ɫɴɨɬɜɟɬɫɬɜɢɟ ƒ Hodnocení plnČní podmínek ƒ Overensstemmelsesvurdering ƒ Conformiteitsbeoordeling ƒ
Vastavushindamine ƒ Vaatimustenmukaisuuden arviointi ƒ Evaluation de conformité ƒ Konformitätsbeurteilung ƒ ǻȚĮʌȓıIJȦıȘ ȈȣȝȝȩȡijȦıȘȢ ƒ
MegfelelĘség-értékelés ƒ Valutazione della conformità ƒ AtbilstƯbas novƝrtƝjums ƒ Atitikties Ƴvertinimas ƒ Livell tal-Qawwa tal-ƪoss Imkejjel ƒ
Ocena zgodnoĞci ƒ Avaliação de Conformidade ƒ Evaluarea conformităĠii ƒ Vyhodnotenie zhodnosti ƒ Ocena skladnosti ƒ Evaluación de
conformidad ƒ Bedömnin
g
av överensstämmelse
2006/42/ECAnnexVIII
Measured Sound Power Level ƒ ɂɡɦɟɪɟɧɨ ɧɢɜɨ ɧɚ ɡɜɭɤɨɜɚ ɦɨɳɧɨɫɬ ƒ NamČĜený akustický výkon ƒ Målte lydstyrkeniveau ƒ Gemeten
geluidsniveau ƒ Mõõdetud helivõimsuse tase ƒ Mitattu äänitehotaso ƒ Niveau de puissance sonore mesuré ƒ Gemessener Schalldruckpegel ƒ
ȈIJĮșȝȚıȝȑȞȠ İʌȓʌİįȠ ȘȤȘIJȚțȒȢ ȚıȤȪȠȢ ƒ Mért hangteljesítményszint ƒ Livello di potenza sonora misurato ƒ Izm ƝrƯtais skaƼas jaudas lƯmenis ƒ
Išmatuotas garso stiprumo lygis ƒ Livell tal-Qawwa tal-ƪoss Iggarantit ƒ Moc akustyczna mierzona ƒ Nível sonoro medido ƒ Nivelul măsurat al
puterii acustice ƒ Nameraná hladina akustického výkonu ƒ Izmerjena raven zvoþne moþi ƒ Nivel de potencia sonora medido ƒ Uppmätt
l
j
udeffektsnivå
94dB(A)Lwa
Guaranteed Sound Power Level ƒ Ƚɚɪɚɧɬɢɪɚɧɨ ɧɢɜɨ ɧɚ ɡɜɭɤɨɜɚ ɦɨɳɧɨɫɬ ƒ Garantovaný akustický výkon ƒ Garanteret lydstyrkeniveau ƒ
Gegarandeerd geluidsniveau ƒ Garanteeritud helivõimsuse tase ƒ Taattu äänitehotaso ƒ Niveau de puissance sonore garanti ƒ Garantierter
Schalldruckpegel ƒ ǼȖȖȣȘȝȑȞȠ İʌȓʌİįȠ ȘȤȘIJȚțȒȢ ȚıȤȪȠȢ ƒ Szavatolt hangteljesítményszint ƒ Livello di potenza sonora garantito ƒ Garant Ɲtais
skaƼas jaudas lƯmenis ƒ Garantuotas garso stiprumo lygis ƒ Livell tal-Qawwa tal-ƪoss Iggarantit ƒ Moc akustyczna gwarantowana ƒ Nível sonoro
farantido ƒ Nivelul garantat al puterii acustice ƒ Garantovaná hladina akustického výkonu ƒ Zajamþena raven zvoþne moþi ƒ Nivel de potencia
sonora
g
arantizado ƒ Garanterad l
udeffektsnivå
95dB(A)Lwa
Conformity Assessment Procedure (Noise) ƒ Ɉɰɟɧɤɚ ɡɚ ɫɴɨɬɜɟɬɫɬɜɢɟ ɧɚ ɩɪɨɰɟɞɭɪɚɬɚ (ɒɭɦ) ƒ Postup hodnocení plnČní podmínek (hluk) ƒ
Procedure for overensstemmelsesvurdering (Støj) ƒ Procedure van de conformiteitsbeoordeling (geluid) ƒ Vastavushindamismenetlus (müra) ƒ
Vaatimustenmukaisuuden arviointimenettely (Melu) ƒ Procédure d’évaluation de conformité (bruit) ƒ Konformitätsbeurteilungsverfahren
(Geräusch) ƒ ǻȚĮįȚțĮıȓĮ ǹȟȚȠȜȩȖȘıȘȢ ȈȣȝȝȩȡijȦıȘȢ (ĬȩȡȣȕȠȢ) ƒ MegfelelĘség-értékelési eljárás (Zaj) ƒ Procedura di valutazione della
conformità (rumore) ƒ AtbilstƯbas novƝrtƝjuma procednjra (troksnis) ƒ Atitikties Ƴvertinimo procednjra (garsas) ƒ Proƛedura tal-Valutazzjoni tal-
Konformità (ƪoss) ƒ Procedura oceny zgodnoĞci (poziom haáasu) ƒ Processo de avaliaç ão de conformidade (nível sonoro) Procedura de
evaluare a conformităĠii (zgomot) ƒ Postup vyhodnocovania zhodnosti (hluk) ƒ Postopek za ugotavljanje skladnosti (hrup) ƒ Procedimiento de
evaluación de conformidad (ruido) ƒ Procedur för bedömning av överensstämmelse (buller)
2000/14/ECAnnexVI
Part1
UK Notified Body for 2000/14/EC ƒ ɇɨɬɢɮɢɰɢɪɚɧ ɨɪɝɚɧ ɜ Ɉɛɟɞɢɧɟɧɨɬɨ ɤɪɚɥɫɬɜɨ ɡɚ 2000/14/ȿɈ ƒ ÚĜad certifikovaný podle smČrnice þ.
2000/14/EC ƒ Det britiske bemyndigede organ for 2001/14/EF ƒ Engels adviesorgaan voor 2000/14/EG ƒ Ühendkuningriigi teavitatud asutus
direktiivi 2000/14/EÜ mõistes ƒ Direktiivin 2000/14/EY mukainen ilmoitettu tarkastuslaitos Isossa-Britanniassa ƒ Organisme notifié concernant la
directive 2000/14/CE ƒ Britische benannte Stelle für 2000/14/EG ƒ ȀȠȚȞȠʌȠȚȘȝȑȞȠȢ ȅȡȖĮȞȚıȝȩȢ ǾȞȦȝȑȞȠȣ ǺĮıȚȜİȓȠȣ ȖȚĮ 2000/14/ǼȀ ƒ
2000/14/EK – egyesült királyságbeli bejelentett szervezet ƒ Organismo Notificato in GB per 2000/14/CE ƒ 2000/14/EK AK re ƧistrƝtƗ organizƗcija
ƒ JK notifikuotosios Ƴstaigos 2000/14/EC ƒ Korp Notifikat tar-Renju Unit gƫal 2000/14/KE ƒ Dopuszczona jednostka badawcza w Wielkiej Brytanii
wg 2000/14/WE ƒ Entidade notificada no Reino Unido para 2000/14/CE ƒ Organism notificat în Marea Britanie pentru 2000/14/CE ƒ Notifikovaný
orgán Spojeného kráĐovstva pre smernicu 2000/14/ES ƒ Britanski priglašeni organ za 2000/14/ES ƒ Cuerpo notificado en el Reino Unido para
2000/14/CE ƒ Anmält organ för 2000/14/EG i Storbritannien
Smithco
WestInc.
200WestPoplarAvene
Cameron,WI54822USA
Operator Ear Noise Level ƒ Ɉɩɟɪɚɬɨɪ ɧɚ ɧɢɜɨɬɨ ɧɚ ɞɨɥɨɜɢɦ ɨɬ ɭɯɨɬɨ ɲɭɦ ƒ Hladina hluku v oblasti uší operátora ƒ St øjniveau i førers
ørehøjde ƒ Geluidsniveau oor bestuurder ƒ Müratase operaatori kõrvas ƒ Melutaso käyttäjän korvan kohdalla ƒ Niveau de bruit à hauteur des
oreilles de l’opérateur ƒ Schallpegel am Bedienerohr ƒ ǼʌȓʌİįȠ șȠȡȪȕȠȣ ıİ ȜİȚIJȠȣȡȖȓĮ ƒ A kezelĘ fülénél mért zajszint ƒ Livello di potenza
sonora all’orecchio dell’operatore ƒ TrokšƼa lƯmenis pie operatora auss ƒ Dirbanþiojo su mašina patiriamo triukšmo lygis ƒ Livell tal-ƪoss fil-
Widna tal-Operatur ƒ Dopuszczalny poziom haáasu dla operatora ƒ Nível sonoro nos ouvidos do operador ƒ Nivelul zgomotului la urechea
operatorului ƒ Hladina hluku pôsobiaca na sluch operátora ƒ Raven hrupa pri ušesu upravljavca ƒ
Nivel sonoro en el oído del operador ƒ
L
j
udnivå vid förarens öra
94dB(A)Lwa (2006/42/EC)
Skupnosti Firma de la persona responsable de la declaración en nombre del fabricante que posee la documentación técnicay está autorizada
34 West Avenue
Harmonised standards used ƒ ɂɡɩɨɥɡɜɚɧɢ ɯɚɪɦɨɧɢɡɢɪɚɧɢ ɫɬɚɧɞɚɪɬɢ ƒ Použité harmonizované normy ƒ Brugte harmoniserede standarder ƒ
Gebruikte geharmoniseerde standaards ƒ Kasutatud ühtlustatud standardid ƒ Käytetyt yhdenmukaistetut standardit ƒ Normes harmonisées
utilisées ƒ Angewandte harmonisierte Normen ƒ ǼȞĮȡȝȠȞȚıȝȑȞĮ ʌȡȩIJȣʌĮ ʌȠȣ ȤȡȘıȚȝȠʌȠȚȒșȘțĮȞ ƒ Harmonizált szabványok ƒ Standard
armonizzati applicati ƒ Izmantotie saskaƼotie standarti ƒ Panaudoti suderinti standartai ƒ Standards armonizzati uĪati ƒ Normy spójne powiązane
ƒ Normas harmonizadas usadas ƒ Standardele armonizate utilizate ƒ Použité harmonizované normy ƒ Uporabljeni usklajeni standardi ƒ
Estándares armonizados utilizados ƒ Harmoniserade standarder som används
BSENISO12100Ͳ1:2003
BSENISO12100Ͳ2:2003
BSENISO13857
BSEN349:1993+A1:2008
Technical standards and specifications used ƒ ɂɡɩɨɥɡɜɚɧɢ ɬɟɯɧɢɱɟɫɤɢ ɫɬɚɧɞɚɪɬɢ ɢ ɫɩɟɰɢɮɢɤɚɰɢɢ ƒ Použité technické normy a specifikace ƒ
Brugte tekniske standarder og specifikationer ƒ Gebruikte technische standaards en specificaties ƒ Kasutatud tehnilised standardid ja
spetsifikatsioonid ƒ Käytetyt tekniset standardit ja eritelmät ƒ Spécifications et normes techniques utilisées ƒ Angewandte technische Normen
und Spezifikationen ƒ ȉİȤȞȚțȐ ʌȡȩIJȣʌĮ țĮȚ ʌȡȠįȚĮȖȡĮijȑȢ ʌȠȣ ȤȡȘıȚȝȠʌȠȚȒșȘțĮȞ ƒ MĦszaki szabványok és specifikációk ƒ Standard tecnici e
specifiche applicati ƒ Izmantotie tehniskie standarti un specifikƗcijas ƒ Panaudoti techniniai standartai ir techninơ informacija ƒ Standards u
speƛifikazzjonijiet tekniƛi uĪati ƒ Normy i specyfikacje techniczne powiązane ƒ Normas técnicas e especificaç ões usadas ƒ Standardele tehnice
úi specificaĠiile utilizate ƒ Použité technické normy a špecifikácie ƒ Uporabljeni tehniþni standardi in specifikacije ƒ Estándares y especificaciones
técnicas utilizadas ƒ Tekniska standarder och specifikationer som används
ISO21299
ISO5349Ͳ1
ISO5349Ͳ2
The place and date of the declaration ƒ Ɇɹɫɬɨ ɢ ɞɚɬɚ ɧɚ ɞɟɤɥɚɪɚɰɢɹɬɚ ƒ Místo a datum prohlášení ƒ Sted og dato for erkl æringen ƒ Plaats en
datum van de verklaring ƒ Deklaratsiooni väljastamise koht ja kuupäev ƒ Vakuutuksen paikka ja päivämäärä ƒ Lieu et date de la déclaration ƒ
Ort und Datum der Erklärung ƒ ȉȩʌȠȢ țĮȚ ȘȝİȡȠȝȘȞȓĮ įȒȜȦıȘȢ ƒ A nyilatkozat kelte (hely és idĘ) ƒ Luogo e data della dichiarazione ƒ
DeklarƗcijas vieta un datums ƒ Deklaracijos vieta ir data ƒ Il-post u d-data tad-dikjarazzjoni ƒ Miejsce i data wystawienia deklaracji ƒ Local e data
da declaração ƒ Locul úi data declaraĠiei ƒ Miesto a dátum vyhlásenia ƒ Kraj in datum izjave ƒ Lugar y fecha de la declaración ƒ Plats och datum
för deklarationen
Smithco West Inc.
200 West Poplar Avenue
Cameron, WI 54822 USA
10-Dec -09
Signature of the person empowered to draw up the declaration on behalf of the manufacturer, holds the technical documentation and is
authorised to compile the technical file, and who is established in the Community.ɉɨɞɩɢɫ ɧɚ ɱɨɜɟɤɚ, ɭɩɴɥɧɨɦɨɳɟɧ ɞɚ ɫɴɫɬɚɜɢ
ɞɟɤɥɚɪɚɰɢɹɬɚ ɨɬ ɢɦɟɬɨ
ɧɚ ɩɪɨɢɡɜɨɞɢɬɟɥɹ, ɤɨɣɬɨ ɩɨɞɞɴɪɠɚɳɬɟɯɧɢɱɟɫɤɚɬɚ ɞɨɤɭɦɟɧɬɚɰɢɹ ɢ ɟ ɨɬɨɪɢɡɢɪɚɧ ɞɚ ɢɡɝɨɬɜɢ ɬɟɯɧɢɱɟɫɤɢɹ ɮɚɣɥ
ɢ ɟ ɪɟɝɢɫɬɪɢɪɚɧ ɜ ɨɛɳɧɨɫɬɬɚ.Podpis osoby oprávnČné sestavit prohlášení jménem výrobce, držet technickou dokumentaci a osoby
oprávnČnésestavit technické soubory a založené v rámci Evropského spoleþenství.Underskrift af personen, der har fuldmagt til at udarbejde
erklæringen på vegne af producenten, der er indehaveraf dokumentationen og er bemyndiget til at udarbejde den tekniske journal, og som er
baseret i nærområdet.Handtekening van de persoon die bevoegd is de verklaring namens de fabrikant te tekenen, de technischedocumentatie
bewaart en bevoegd is om het technische bestand samen te stellen, en die is gevestigd in het Woongebied.Ühenduse registrisse kantud isiku
allkiri, kes on volitatud tootja nimel deklaratsiooni koostama, kes omab tehnilistdokumentatsiooni ja kellel on õigus koostada tehniline
toimik.Sen henkilön allekirjoitus, jolla on valmistajan valtuutus vakuutuksen laadintaan, jolla on hallussaan teknisetasiakirjat, joka on valtuutettu
laatimaan tekniset asiakirjat ja joka on sijoittautunut yhteisöön.Signature de la personne habilitée à rédiger la déclaration au nom du fabricant,
à détenir la documentationtechnique, à compiler les fichiers techniques et qui est implantée dans la Communauté.Unterschrift der Person, die
berechtigt ist, die Erklärung im Namen des Herstellers abzugeben, die dietechnischen Unterlagen aufbewahrt und berechtigt ist, die
technischen Unterlagen zusammenzustellen,und die in der Gemeinschaft niedergelassen ist.ȊʌȠȖȡĮijȒ ĮIJȩȝȠȣ İȟȠȣıȚȠįȠIJȘȝȑȞȠȣ ȖȚĮ IJȘȞ
ıȪȞIJĮȟȘ IJȘȢ įȒȜȦıȘȢ İț ȝȑȡȠȣȢ IJȠȣ țĮIJĮıțİȣĮıIJȒ, Ƞ ȠʌȠȓȠȢțĮIJȑȤİȚ IJȘȞ IJİȤȞȚțȒ ȑțșİıȘ țĮȚ ȑȤİȚ IJȘȞ İȟȠȣıȚȠįȩIJȘıȘ ȞĮ IJĮȟȚȞȠȝȒıİȚ IJȠȞ IJİȤȞȚțȩ
ijȐțİȜȠ țĮȚ Ƞ ȠʌȠȓȠȢ İȓȞĮȚįȚȠȡȚıȝȑȞȠȢ ıIJȘȞ ȀȠȚȞȩIJȘIJĮ.A gy ártó nevében meghatalmazott személy, akinek jogában áll módosítania a
nyilatkozatot, a mĦszakidokumentációt Ęrzi, engedéllyel rendelkezik a mĦszaki fájl összeállításához, és aki a közösségbenletelepedett
személy.Firma della persona autorizzata a redigere la dichiarazione a nome del fabbricante, in possesso Delladocumentazione tecnica ed
autorizzata a costituire il fascicolo tecnico, che deve essere stabilita nella Comunità.T Ɨs personas paraksts, kura ir pilnvarota deklarƗcijas
sastƗdƯšanai ražotƗja vƗrdƗ, kurai ir tehniskƗdokumentƗcija, kura ir pilnvarota sagatavot tehnisko reƧistru un kura ir apstiprinƗta
KopienƗ.Asmuo, kuris yra gana žinomas, kuriam gamintojas suteikơ Ƴgaliojimus sudaryti šią deklaraciją, ir kuris jąpasirašơ, turi visą techninĊ
informaciją ir yra Ƴgaliotas sudaryti techninơs informacijos dokumentą.Il-firma tal-persuna awtorizzata li tfassal id-dikjarazzjoni f’isem il-
fabbrikant, gƫandha d-dokumentazzjoniteknika u hija awtorizzata li tikkompila l-fajl tekniku u li hija stabbilita fil-Komunit à.Podpis osoby
upowaĪnionej do sporządzenia deklaracji w imieniu producenta, przechowującej dokumentacjĊtechniczną, upowaĪnioną do stworzenia
dokumentacji technicznej oraz wyznaczonej ds. wspólnotowych.Assinatura da pessoa com poderes para emitir a declaração em nome do
fabricante, que possui a documentaçãotécnica, que está autorizada a compilar o processo técnico e que está estabelecida na
Comunidade.Semnătura persoanei împuternicite să elaboreze declaraĠia în numele producătorului, care deĠine documentaĠiatehnică, este
autorizată să compileze dosarul tehnic úi este stabilită în Comunitate.Podpis osoby poverenej vystavením vyhlásenia v mene výrobcu, ktorá
má technickú dokumentáciu a jeoprávnená spracovaĢ technické podklady a ktorá je umiestnená v Spoloþenstve.Podpis osebe, pooblašþene za
izdelavo izjave v imenu proizvajalca, ki ima tehniþno dokumentacijo in lahkosestavlja spis tehniþne dokumentacije, ter ima sedež v
Skupnosti.Firma de la persona responsable de la declaración en nombre del fabricante, que posee la documentación técnicay está autorizada
. ,
para recopilar el archivo técnico y que está establecido en la Comunidad.Undertecknas av den som bemyndigad att upprätta deklarationen å
tillverkarens vägnar, innehar den tekniskadokumentationen och är bemyndigad att sammanställa den tekniska informationen och som är
etablerad igemenskapen.
2006/42/ECAnnexII1A:2
TimLansdell
TechnicalDirector
19thMarch2009
RansomesJacobsen
LimitedWestRoad,RansomesEuropark,Ipswich,
England,IP39TT
2006/42/ECAnnexII1A:10
DawnBryngelson
TechnicalDocumentationAdvisor
SmithcoInc.
34 West Avenue

Wayne,PAUSA19087Ͳ3311
10ͲDecͲ09
Certificate Number ƒ ɇɨɦɟɪ ɧɚ ɫɟɪɬɢɮɢɤɚɬ ƒ ýíslo osvČdþení ƒ Certifikatnummer ƒ Certificaatnummer ƒ Sertifikaadi number ƒ
Hyväksyntänumero ƒ Numéro de certificat ƒ Bescheinigungsnummer ƒ ǹȡȚșȝȩȢ ȆȚıIJȠʌȠȚȘIJȚțȠȪ ƒ Hitelesítési szám ƒ Numero del certificato ƒ
SertifikƗta numurs ƒ Sertifikato numeris ƒ Numru taƛ-ƚertifikat ƒ Numer certyfikatu ƒ Número do Certificado ƒ Număr certificat ƒ ýíslo osvedþenia
ƒ
Š
tevilka certifikata ƒ Número de certificado ƒ Certifikatsnummer
430012009Ͳ1
The Smithco Commercial Products Two-Year Limited Warranty
Smithco, Inc. (Smithco) warrants your 2007 or newer Smithco Commercial Product (“Product”) purchased after
January 1, 2007, to be free from defects in materials or workmanship for the period of time listed below. Where
a warrantable condition exists, Smithco will repair the Product at no cost to you including diagnosis, labor (at the
Smithco standard labor rate, subject to the Smithco flat rate schedule), and parts.
Warranty Duration is:
(1) Two years, 1500 operational hours* from the date of delivery to the original purchaser or three years
from the date of original manufacturer of the product, whichever occurs first. (*Products equipped with
hour meter).
(2) Products used in rental situations are covered for 90 days from date of delivery to original user/renter.
Owner Responsibilities:
As the Product owner, you are responsible for required maintenance and adjustments stated in your Owner’s
Manual. Failure to perform required maintenance and adjustments can be grounds for disallowing a warranty claim.
You are particularly responsible to train all present and future operators of this product on the safe operation of
this product at your location.
Instructions for Obtaining Warranty Service:
You are responsible for notifying the Authorized Smithco Products Distributor from whom you purchased the Product
as soon as you believe a warrantable condition exists and not later than 30 days from discovery of the condition.
If you need help locating an Authorized Smithco Distributor, or if you have questions regarding your warranty rights or
responsibilities, you may contact us at:
Smithco Product Support Department
200 W Poplar PO Box 487
Cameron, Wisconsin 54822
Telephone: 1-800-891-9435 E-Mail: [email protected]
Maintenance Parts:
Parts scheduled for replacement as required maintenance (“Maintenance Parts”), are warranted for the period of
time up to the scheduled replacement time for that part.
Items/Conditions Not Covered:
Not all product failures or malfunctions that occur during the warranty period are defects in materials or
workman-ship. The items/conditions listed below are not covered by this warranty:
Product failures which result from the use of non-Smithco replacement parts, or from installation and use of
add-on, modified, or unapproved accessories are not cov-ered.
Product failures which result from failure to perform required maintenance and/or adjustments are not cov-
ered.
Product failures that result from operating the Product in an abusive, negligent or reckless manner are not
covered.
This warranty does not apply to parts subject to con-sumption through use, unless found to be defective.
Examples of parts which are consumed, or used up, during normal Product operation include, but are not
limited to: blades, tines, teeth, scarifiers, rakes, plates, wear plates, castor wheels, tires, batteries, filters,
belts, nozzles, etc.
This warranty does not apply to failures caused by out-side influence. Items considered to be outside influ-
ence include, but are not limited to, weather, storage practices, contamination, use of unapproved coolants,
lubricants, additives, or chemicals, etc.
This warranty does not apply to normal “wear and tear” items. Normal “Wear and Tear” includes, but is not
lim-ited to, damage to seats due to wear or abrasion, worn painted surfaces, scratched decals or windows,
etc.
Smithco may require the return of failed parts or components in order to determine the validity of any warranty
claim.
Smithco will not be obligated to replace components of other manufacturers if inspection by the original
component manufacturer indicates that failure was due to normal wear and tear, expected consumption
through use or improper care or service.
Other Legal Disclaimers:
The above remedy for product defects through repair or replacement by an authorized Smithco distributor or dealer is
the purchaser’s sole remedy for any defect. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
THERE ARE NO OTHER EXPRESS WARRANTIES OTHER THAN THOSE SET FORTH ABOVE. ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE DURATION OF THE LIMITED
WARRANTIES CONTAINED HEREIN.
Some states may not allow limitations on how long an implied warranty lasts, so the above limitation may not
apply to you.
THE SMITHCO COMPANY IS NOT LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH THE USE OF THE PRODUCT, INCLUDING ANY COST OR EXPENSE OF PROVIDING A SUBSTITUTE
PRODUCT OR SERVICE DURING PERIODS OF MALFUNCTION OR NON-USE.
Some states may not allow the exclusion of indirect, incidental or consequential damages, so the above exclusion
may not apply to you.
Smithco neither assumes, nor authorizes any person to assume for it, any other liability in connection with the
sale or use of this product.
SMITHCO, INC.
Wayne, PA 19087
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

Smithco Super Star LE Instrucțiuni de utilizare

Tip
Instrucțiuni de utilizare