Smithco Sweep Star 60-QUAD – 2016 Manualul proprietarului

Marca: Smithco

Model: Sweep Star 60-QUAD – 2016

Categorie: Accesorii pentru autovehicule

Tip: Manualul proprietarului

Acest manual este potrivit și pentru

Sweep Star 60-QUAD – 2019

December 2019

35HP SweepStar 60

Model 76-750-A

Product Support: Hwy SS & Poplar Ave; Cameron WI 54822

1-800-891-9435 productsupport@smithco.com

Operator’s

Introduction Operation Diagrams Reference

CONTENTSI

Introduction ................................................................. 1

Symbols ...................................................................... 2

Safety .......................................................................... 3

Safety Decals .............................................................. 4

General Safe Practices ............................................... 5

Specications ............................................................. 6

Operation .................................................................... 7-11

Set Up ......................................................................... 7

Controls & Instruments ................................................ 8

Operation ............................................................... 9-10

Battery ........................................................................11

Diagrams ................................................................... 12-13

Wiring Diagram ......................................................... 12

Hydraulic Diagram ..................................................... 13

Reference .................................................................. 14-16

Declaration of Conformity ...................................... 14-15

Quick Reference ....................................................... 16

Introduction

INTRODUCTION

Thank you for purchasing a Smithco product.

Read this manual and all other manuals pertaining to the Sweeper carefully as they contain safety, operating,

assembly and maintenance instructions. Failure to do so could result in personal injury or equipment damage.

Keep manuals in a safe place after operator and maintenance personnel have read them. Right and left sides

are from the operator’s seat, facing forward.

All Smithco machines have a Serial Number and Model Number. Both numbers are needed when ordering

parts. Refer to engine manual for placement of engine serial number.

For product and accessory information, help nding a dealer, or to register your procuct please contact us at

www.Smithco.com.

Information needed when ordering replacement parts:

1. Model Number of machine

2. Serial Number of machine

3. Name and Part Number of part

4. Quantity of parts

For easy access record your Serial and Model numbers here.





WARNING:

Engine exhaust and some of its constituents are

known to the State of California to cause cancer,

birth defects, and other reproductive harm.

For more information visit

www.P65Warning.ca.gov

WARNING

Failure to follow cautious operating prac-

tices can result in serious injury to the

operator or other persons. The owner must

understand these instructions, and must

allow only trained persons who understand

these instructions to operate this vehicle.

Introduction

20° MAX

Read Operator’s

Manual

Engine Stop

Engine Start

Engine Run

Engine Oil

Water

Temperature

RPM

Gasoline

Diesel

Glow Plug

Hour Meter

Hand Throttle

Choke

Hydraulic

Oil Level

Ground Speed

Park Brake

Release

Lift Arm

Slow

Moving Parts

Pinch Point

Hydraulic Fluid

Penetration

Warning

Danger

Caution

Fast

Rollover

Danger

Hot Surface

Headlamp

Seat Belt

No Riders

Blower

SYMBOLS

Introduction

SAFETY

Read and understand this manual and all safety signs before operating and maintaining. Review the safety

instructions and precautions annually.

TAKE NOTE! THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS MANUAL IS USED TO CALL

YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL SAFETY AND THE SAFETY OF

OTHERS. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.

Safety Alert Symbol

This symbol with a warning statement means:

WARNING! BE ALERT!

YOUR SAFETY IS INVOLVED!

Carefully reard the message that follows

SAFETY SIGNAL WORDS

Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages. The

appropriate signal word for each has been selected using the following guidelines:

DANGER: Red. Indicates an imminently hazardous situa-

tion that, if not avoided, will result in death or serious injury.

This signal word is to be limited to the most extreme situa-

tions typically for machine components which, for functional

purposes, cannot be guarded.

WARNING: Orange. Indicates a potentially hazardous

situation that, if not avoided, could result in death or serious

injury, and includes hazards that are exposed when guards

are removed. It may also be used to alert against unsafe

practices.

CAUTION: Yellow. Indicates a potentially hazardous situ-

ation that, if not avoided, may result in minor or moderate

injury. It may also be used to alert against unsafe practices.

IMPORTANT: Blue. Indicates procedures which should be

followed to avoid damage to the machine.

Introduction

SAFETY DECAL LOCATION

If Safety Decals have been damaged, removed, become illegible or parts re-

placed without decals, new decals must be applied. New decals are available

from your authorized distributor.

This is a list of decals located on the Sweep Star Quad Part number, description and location will help in reor-

dering a decals.

A 25-279 Decal, Safety Warning Belt Guard

B 25-286 Decal, Pinch Point Front & Back Belt Guard/R&L Hopper Bottom

C 25-298 Decal, Warning Hot Fan Mount

D 25-307 Decal, Refuel w/ Gasoline Manifold Mount (above gas tank)

E 25-320 Decal, Warning Load Limit Left Front Hopper

F 25-355 Decal, Tire Pressure 18 PSI Front Tires

G 25-355 Decal, Tire Pressure 18 PSI Rear Tires

H 25-358 Decal, Smithco 12" Front Dash Console

I 25-359 Decal, Smithco 17" Rear Hopper

J 25-362 Decal, Fire Danger Oil Tank Cover

L 25-373 Decal, 7" Smithco Star Front Oil Tank

M 75-651 Decal, Hopper Lift Safety Hopper Lift Safety Bar

N 76-304 Decal, Crush/Pinch R&L Front Hopper

O 76-307 Decal, Tower Warning R&L Hopper Tower

P 76-417 Decal, Sweep Star 60 R&L Hopper Side

Q 76-536 Decal, Control Panel Dash Panel

Introduction

SAFE PRACTICES

1. It is your responsibility to read this manual and all publications associated with this machine (engine, accessories

and attachments).

2. Never allow anyone to operate or service the machine or its attachments without proper training and instructions.

Never allow minors to operate any equipment.

3. Learn the proper use of the machine, the location and purpose of all the controls and gauges before you operate

the equipment. Working with unfamiliar equipment can lead to accidents.

4. Wear all the necessary protective clothing and personal safety devises to protect your head, eyes, ears, hands and

feet. Operate the machine only in daylight or in good articial light.

5. Inspect the area where the equipment will be used. Beware of overhead obstructions and underground obstacles.

Stay alert for hidden hazards.

6. Never operate equipment that is not in perfect working order or without decals, guards, shields, or other protective

devices in place.

7. Never disconnect or bypass any switch.

8. Carbon monoxide in the exhaust fumes can be fatal when inhaled, never operate a machine without proper ventila-

tion.

9. Fuel is highly ammable, handle with care. When lling tank stop 1 inch(2.54 cm) from top. Leave room for expan-

sion. DO NOT OVERFILL.

10. Keep engine clean. Allow the engine to cool before storing and always remove the ignition key.

11. Never use your hands to search for oil leaks. Hydraulic uid under pressure can penetrate the skin and cause seri-

ous injury.

12. This machine demands your attention. To prevent loss of control or tipping of the vehicle:

A. Use extra caution in backing up the vehicle. Ensure area is clear.

B. Do not stop or start suddenly on any slope.

C. Reduce speed on slopes and in sharp turns. Use caution when changing directions on slopes.

D. Stay alert for holes in the terrain and other hidden hazards.

E. Run up and down slopes, never across the face.

13. Before leaving operator’s position for any reason:

A Disengage all drives.

B. Lower all attachments to the ground.

C. Shut engine o and remove the ignition key.

14. Keep hands, feet and clothing away from moving parts. Wait for all movement to stop before you clean, adjust or

service the machine.

15. The rubber ngers, sweeper and vacuum pick up and propel debris and small objects in its path during operation.

Keep the area of operation clear of all bystanders.

16. Never carry passengers.

17. Stop engine before making repairs/adjustments or checking/adding oil to the crankcase.

18. Use parts and materials supplied by SMITHCO only. Do not modify any function or part.

19. Do not remove the radiator cap when the engine is hot. When cooled, loosen cap slightly to the stop to relieve any

pressure before removing the cap completely.

20. Avoid sharp turns. Watch the tires of the tractor while turning to make sure they do not contact the tongue of the

Turf Vac.

21. Shut down power source before attempting to unclog any part of the machine.

22. If reel deck begins to vibrate abnormally, immediately shut o power and determine the cause.

23. Do not tow on public roads.

These machines are intended for professional maintenance on golf courses, sports turf, and any other

area maintained turf and related trails, paths and lots. No guaranty as to the suitability for any task is

expressed or implied.

Introduction

SPECIFICATIONS FOR SWEEP STAR 60

WEIGHTS AND DIMENSIONS

Length 134" (340 cm)

Width 74.5" (179 cm)

Height with Hopper Down 82" (208 cm)

Height with Hopper Up 124" (315 cm)

Wheel Base 72" (183 cm)

Weight 2550 lbs (1157 kg)

ROLL OVER PROTECTION BAR WITH SEAT BELTS

Smithco Engineered Operator Structure with Seat Belts

SOUND LEVEL GAS ENGINE

At ear level 86 dB

At 3 ft (0.914 m) 88 dB

At 30 ft (9.14 m) 76 dB

ENGINE GAS

Make Briggs & Stratton

Model# 61347

Type / Spec# 0271-J1

Horsepower 35 Hp (26 kw)

Fuel Unleaded 87 Octane

Gasoline Minimum

Cooling System Air Cooled

Lubrication System Full Pressure

Alternator 24 Amp

Tire & Wheels Front: Two 20 x 10.00 x 10 Turf-trac (5 psi; .34 bar)

Rear: Two 24 x 13.00 x 12 Super Soft (18 psi; 1.3 bar)

Castor: 9 x 3.5 - 4 (20 psi; 1.4 bar)

SPEED

Forward Speed 0 to 12 m.p.h. (0-19 kph)

Reverse Speed 0 to 4 m.p.h. (0-6 kph)

BATTERY Automotive type 24F -12 volt

BCI Group Size 24F

Cold Cranking Amps 4600minimum

Ground Terminal Polarity Negative (-)

Maximum Length 10.25" (26 cm)

Maximum Width 6.88" (17 cm)

Maximum Height 10.00" (25 cm)

FLUID CAPACITY

Crankcase Oil See Engine Manual

Fuel 8 gallon (30,2 liters)

Hydraulic Fluid 25 gallon (94,6 liters)

Grade of Hydraulic Fluid SAE 10W-40 API Service SJ or higher Motor Oil

Operation

SETUP

The Sweep Star arrives from Smithco setup and ready for service.

1. Set park brake.

2. Check the tire pressure. Sweep Star 60: The front tirs are 5 psi (.34 bar), castor wheels are 20 psi (1.4

bar) and the rear tires are 18 psi (1.3 bar).

3. Check the installation of the battery, which is located

below the seat. This is a negative grounding system.

Connecting battery cables to the

wrong post could result in per-

sonal injury and/or damage to

the electrical system. Make sure

battery and cables do not interfere or rub on

any moving part. Connect the red positive(+)

cable (A) to the battery rst. When disconnecting

remove the black negative(-) cable (B) rst.

4. Check the engine oil and add as necessary. The dip

stick is located uleft engine side. Oil ll is located on

top of valve cover, use SAE 10W-40 API Service SJ or

higher motor oil. DO NOT OVERFILL.

5. Fill fuel tank, located on left side, with Unleaded 87 Octane gasoline (minimum). When lling the fuel

tank stop when the fuel reaches 1 inch (2.54cm) from the top. This space is necessary for fuel expan-

sion. DO NOT OVERFILL.

Fuel is ammable. Caution must be used when storing or handling it. Do not

ll fuel tank while engine is running or in an enclosed area. Fumes are explo-

sive and dangerous to inhale. DO NOT SMOKE while lling the fuel tank. DO

NOT OVERFILL.

6. Check hydraulic uid level in tank. Loactes on right side. Remove cap and add SAE 10W-40 API Ser-

vice SJ or higher motor oil if necessary. Fluid level should be about 2"-2

" (5 - 6.4 cm) from the top of

the tank when cold.

7. Machine should be greased before starting. See Maintenance part of manual.

8. Read operating instructions before starting.

Operation

CONTROLS & INSTRUMENTS

A. Hand Throttle - The hand throttle is used to regulate engine speed.

B. Oil Light - The oil light should come on when the ignition is on without the engine running and go out

when the engine is running. The oil light will light when the oil pressure is low. If oil light should come

on, shut engine o immediately and nd the cause.

C. Ignition Switch - The ignition switch has three positions: O - Run - Start.

D. Reel Engage - Controls the reel electrically. NOTE: Electric clutch must be disengaged before starting.

E. Lights - Toggle lights on and o.

F. Reel Lift Lever - The reel lift lever is used raise and lower the reel. Pull back to raise the reel. Push

forward to lower the reel.

G. Hopper Lift Lever - The hopper lift lever is used to raise and lower the hopper. Pull back to raise the

hopper. Push forward to lower the hopper.

H. Tailgate Lever - The tailgate lever is used to open and close the tailgate. Pull back to open the tailgate.

Push forward to close the tailgate. Tailgate tends to creep open while sweeping. Frequently close the

tailgate to ensure no creeping.

I. Hour Meter - The hour meter indicates hours of machine operation. It operates only when the ignition

switch is on.

J. Choke - The choke is used in starting the engine. Pull choke out to close choke plate when starting a

cold engine. Push in when engine starts. A warm engine

may not require "choking" to start.

K. Park Brake - The park brake is only a parking brake. Pull

back to release, push forward to apply.

L. Inclinometer - Indicates machine tilt on side hill. DO NOT

EXCEED 10°.

Operation

OPERATION

Before operating this machine, become familiar with all controls and functions of these units. Also complete all

maintenance requirements and read all safety warnings. By knowing the machine thoroughly, how it operates

and by doing the prescribed maintenance steps, you can expect relatively trouble-free operation for years to

come.

Beater reel MUST BE DISENGAGED before starting engine.

STARTING GAS ENGINE

1. Make sure the fuel ow valve, located on the fuel tank, is “ON.”

2. The ignition switch is located on control panel. Insert key (A) and turn

clockwise until engine starts (C). Release key and it will return to run

position (B). Use choke and hand throttle as necessary.

3. Allow engine to idle and warm up a few minutes before selecting a direc-

tion of travel.

TAILGATE LEVER

Tailgate tends to creep open while sweeping. Frequently close the tailgate to ensure no creeping.

ACCELERATOR/REVERSE PEDAL

On the right oorboard of the Sweep Star 60 are 2 ped-

als. Push down on the inside pedal (E) with your foot

and the machine will accelerate. Push down on the rear

outside pedal (F) with your foot and the machine will go

in reverse. The machine is in neutral when foot is o the

pedals.

Operation

OPERATION

DAILY CHECKLIST

1. Check park brake adjustment. Adjust as required.

2. Check engine oil level. Add as needed. DO NOT OVERFILL.

3. Tire pressure should be 20 psi (1.4 bar) on all Sweep Star 48 tires and castor wheels. Tire pressure

should be 20 psi (1.4 bar) on Sweep Star 60 front tire and castor wheel, 18 psi (1.3 bar) on rear tires.

4. Inspect electrical system for loose connections or frayed wiring, including battery cables. Replace any

faulty equipment or tighten if loose.

5. Check hardware for loose or missing nuts, bolts, screws, etc., and tighten or replace as needed.

6. Inspect hydraulic lines for damage or leaks. Never use hands to inspect leaks.

7. Check hydraulic oil level in right side tank. The level should be 2" to 2

" (5-6.4 cm) from top of tank

when uid is cold. If level is low, add SAE 10W-40 API Service SJ or higher motor oil.

8. Inspect steering, throttle and shift linkages for good hookups and clear travel.

9. Check controls for smooth, proper working operation. Lubricate as needed.

10. Check and clean all debris from engine compartment.

HOPPER LIFT SAFETY ARM

Each machine is equipped with two Hopper Lift Safety Bar. They are stored on the Hopper Dump arms, on

each side of the hopper, with two bolts and wing nuts. See Picture 1.

The purpose of the Hopper Lift Safety Bar is to help the hop-

per lift cylinders hold the hopper in the up position. The weight

of the hopper can cause the cylinders to retract. Bolt the

Hopper Lift safety bar around the cylinder shaft to prevent the

hopper from slowly lowering due to gravity. See Picture 2.

Picture 1

Picture 2

Operation

BATTERY

Batteries normally produce explosive gases which can cause personal injury. Do not allow ames, sparks or

any ignited object to come near the battery. When charging or working near battery, always shield your eyes

and always provide proper ventilation.

Battery cable should be disconnected before using “Fast Charge”.

Charge battery at 15 amps for 10 minutes or 7 amps for 30 minutes. Do not exceed the recommended

charging rate. If electrolyte starts boiling over, decrease charging.

Always remove grounded (-) battery clamp rst and replace it last. Avoid hazards by:

1. Filling batteries in well-ventilated areas.

2. Wear eye protection and rubber gloves.

3. Avoid breathing fumes when electrolyte is added.

4. Avoid spilling or dripping electrolyte.

Battery Electrolyte is an acidic solution and should be handled with care. If

electrolyte is splashed on any part of your body, ush all contact areas imme-

diately with liberal amounts of water. Get medical attention immediately.

JUMP STARTING

Use of booster battery and jumper cables. Particular care should be used

when connecting a booster battery. Use proper polarity in order to prevent

sparks.

To jump start (negative grounded battery):

1. Shield eyes.

2. Connect ends of one cable to positive (+) termi-

nals of each battery, rst (A) then (B).

3. Connect one end of other cable to negative (-)

terminal of "good" battery (C).

4. Connect other end of cable (D) to engine block

on unit being started (NOT to negative (-) termi-

nal of battery)

To prevent damage to other electrical components on

unit being started, make certain that engine is at idle

speed before disconnecting jumper cables.

TOWING

When it is necessary to move the Sweep Star 60 without engine running, the bypass valve built into hydro-

static pump must be “open” by turning it counterclockwise. The valve is located on bottom left of pump. An

“open” valve allows uid to pass through the wheels freely. When normal, driven, operation is desired, valve

should be closed by turning it clockwise. Failure to “close” the valve with engine running means no power to

wheels.

Diagrams

WIRING DIAGRAM

Diagrams

HYDRAULIC DIAGRAM

Reference

Business name and full address of the manufacturer ▪ Търговско име и пълен адрес на производителя ▪ Obchodní jméno a plná adresa

výrobce ▪ Producentens firmanavn og fulde adresse ▪ Bedrijfsnaam en volledig adres van de fabrikant ▪ Tootja ärinimi ja täielik aadress ▪

Valmistajan toiminimi ja täydellinen osoite ▪ Nom commercial et adresse complète du fabricant ▪ Firmenname und vollständige Adresse des

Herstellers ▪ Επωνυμία και ταχυδρομική διεύθυνση κατασκευαστή ▪ A gyártó üzleti neve és teljes címe ▪ Ragione sociale e indirizzo

completo del fabbricante ▪ Uzņēmuma nosaukums un pilna ražotāja adrese ▪ Verslo pavadinimas ir pilnas gamintojo adresas ▪ Isem

kummerċjali u indirizz sħiħ tal-fabbrikant ▪ Nazwa firmy i pełny adres producenta ▪ Nome da empresa e endereço completo do fabricante ▪

Denumirea comercială şi adresa completă a producătorului ▪ Obchodný názov a úplná adresa výrobcu ▪ Naziv podjetja in polni naslov

proizvajalca ▪ Nombre de la empresa y dirección completa del fabricante ▪ Tillverkarens företagsnamn och kompletta adress

Smithco Inc.

34 West Avenue

Wayne, PA USA

19087-3311

Product Code ▪ Код на продукта ▪ Kód výrobku ▪ Produktkode ▪ Productcode ▪ Toote kood ▪ Tuotekoodi ▪ Code produit ▪ Produktcode ▪

Κωδικός προϊόντος ▪ Termékkód ▪ Codice prodotto ▪ Produkta kods ▪ Produkto kodas ▪ Kodiċi tal-Prodott ▪ Kod produktu ▪ Código do Produto

▪ Cod produs ▪ Kód výrobku ▪ Oznaka proizvoda ▪ Código de producto ▪ Produktkod

76-750

Machine Name ▪ Наименование на машината ▪ Název stroje ▪ Maskinnavn ▪ Machinenaam ▪ Masina nimi ▪ Laitteen nimi ▪ Nom de la

machine ▪ Maschinenbezeichnung ▪ Ονομασία μηχανήματος ▪ Gépnév ▪ Denominazione della macchina ▪ Iekārtas nosaukums ▪ Mašinos

pavadinimas ▪ Isem tal-Magna ▪ Nazwa urządzenia ▪ Nome da Máquina ▪ Numele echipamentului ▪ Názov stroja ▪ Naziv stroja ▪ Nombre de

la máquina ▪ Maskinens namn

Sweep Star 60

Designation ▪ Предназначение ▪ Označení ▪ Betegnelse ▪ Benaming ▪ Nimetus ▪ Tyyppimerkintä ▪ Pažymėjimas ▪ Bezeichnung ▪

Χαρακτηρισμός ▪ Megnevezés ▪ Funzione ▪ Apzīmējums ▪ Lithuanian ▪ Denominazzjoni ▪ Oznaczenie ▪ Designação ▪ Specificaţie ▪ Označenie

▪ Namen stroja ▪ Descripción ▪ Beteckning

Turf Sweeper

Serial Number ▪ Сериен номер ▪ Sériové číslo ▪ Serienummer ▪ Serienummer ▪ Seerianumber ▪ Valmistusnumero ▪ Numéro de série ▪

Seriennummer ▪ Σειριακός αριθμός ▪ Sorozatszám ▪ Numero di serie ▪ Sērijas numurs ▪ Serijos numeris ▪ Numru Serjali ▪ Numer seryjny ▪

Número de Série ▪ Număr de serie ▪ Sériové číslo ▪ Serijska številka ▪ Número de serie ▪ Serienummer

60Q1035-60Q2500

Engine ▪ Двигател ▪ Motor ▪ Motor ▪ Motor ▪ Mootor ▪ Moottori ▪ Moteur ▪ Motor ▪ Μηχανή ▪ Modulnév ▪ Motore ▪ Dzinējs ▪ Variklis ▪ Saħħa

Netta Installata ▪ Silnik ▪ Motor ▪ Motor ▪ Motor ▪ Motor ▪ Motor ▪ Motor

Briggs &* Stratton 613477

Net Installed Power ▪ Нетна инсталирана мощност ▪ Čistý instalovaný výkon ▪ Installeret nettoeffekt ▪ Netto geïnstalleerd vermogen ▪

Installeeritud netovõimsus ▪ Asennettu nettoteho ▪ Puissance nominale nette ▪ Installierte Nettoleistung ▪ Καθαρή εγκατεστημένη ισχύς ▪

Nettó beépített teljesítmény ▪ Potenza netta installata ▪ Paredzētā tīkla jauda ▪ Grynoji galia ▪ Wisa’ tal-Qtugħ ▪ Moc zainstalowana netto ▪

Potência instalada ▪ Puterea instalată netă ▪ Čistý inštalovaný výkon ▪ Neto vgrajena moč ▪ Potencia instalada neta ▪ Nettoeffekt

26 kW

Conforms to Directives ▪ В съответствие с директивите ▪ Splňuje podmínky směrnic ▪ Er i overensstemmelse med direktiver ▪ Voldoet aan

de richtlijnen ▪ Vastab direktiividele ▪ Direktiivien mukainen ▪ Conforme aux directives ▪ Entspricht Richtlinien ▪ Ακολουθήστε πιστά τις

Οδηγίες ▪ Megfelel az irányelveknek ▪ Conforme alle Direttive ▪ Atbilst direktīvām ▪ Atitinka direktyvų reikalavimus ▪ Valutazzjoni tal-

Konformità ▪ Dyrektywy związane ▪ Cumpre as Directivas ▪ Respectă Directivele ▪ Je v súlade so smernicami ▪ Skladnost z direktivami ▪

Cumple con las Directivas ▪ Uppfyller direktiv

2006/42/EC;

2000/14/EC Annex VI . Part 1

Conformity Assessment ▪ Оценка за съответствие ▪ Hodnocení plnění podmínek ▪ Overensstemmelsesvurdering ▪

Conformiteitsbeoordeling ▪ Vastavushindamine ▪ Vaatimustenmukaisuuden arviointi ▪ Evaluation de conformité ▪ Konformitätsbeurteilung ▪

Διαπίστωση Συμμόρφωσης ▪ Megfelelőség-értékelés ▪ Valutazione della conformità ▪ Atbilstības novērtējums ▪ Atitikties įvertinimas ▪ Livell

tal-Qawwa tal-Ħoss Imkejjel ▪ Ocena zgodności ▪ Avaliação de Conformidade ▪ Evaluarea conformităţii ▪ Vyhodnotenie zhodnosti ▪ Ocena

skladnosti ▪ Evaluación de conformidad ▪ Bedömning av överensstämmelse

2006/42/EC Annex VIII

Measured Sound Power Level ▪ Измерено ниво на звукова мощност ▪ Naměřený akustický výkon ▪ Målte lydstyrkeniveau ▪ Gemeten

geluidsniveau ▪ Mõõdetud helivõimsuse tase ▪ Mitattu äänitehotaso ▪ Niveau de puissance sonore mesuré ▪ Gemessener Schalldruckpegel ▪

Σταθμισμένο επίπεδο ηχητικής ισχύος ▪ Mért hangteljesítményszint ▪ Livello di potenza sonora misurato ▪ Izmērītais skaņas jaudas līmenis ▪

Išmatuotas garso stiprumo lygis ▪ Livell tal-Qawwa tal-Ħoss Iggarantit ▪ Moc akustyczna mierzona ▪ Nível sonoro medido ▪ Nivelul măsurat al

puterii acustice ▪ Nameraná hladina akustického výkonu ▪ Izmerjena raven zvočne moči ▪ Nivel de potencia sonora medido ▪ Uppmätt

ljudeffektsnivå

86 dB(A)Lwa

Guaranteed Sound Power Level ▪ Гарантирано ниво на звукова мощност ▪ Garantovaný akustický výkon ▪ Garanteret lydstyrkeniveau ▪

Gegarandeerd geluidsniveau ▪ Garanteeritud helivõimsuse tase ▪ Taattu äänitehotaso ▪ Niveau de puissance sonore garanti ▪ Garantierter

Schalldruckpegel ▪ Εγγυημένο επίπεδο ηχητικής ισχύος ▪ Szavatolt hangteljesítményszint ▪ Livello di potenza sonora garantito ▪ Garantētais

skaņas jaudas līmenis ▪ Garantuotas garso stiprumo lygis ▪ Livell tal-Qawwa tal-Ħoss Iggarantit ▪ Moc akustyczna gwarantowana ▪ Nível

sonoro farantido ▪ Nivelul garantat al puterii acustice ▪ Garantovaná hladina akustického výkonu ▪ Zajamčena raven zvočne moči ▪ Nivel de

potencia sonora garantizado ▪ Garanterad ljudeffektsnivå

88 dB(A)Lwa

Conformity Assessment Procedure (Noise) ▪ Оценка за съответствие на процедурата (Шум) ▪ Postup hodnocení plnění podmínek (hluk) ▪

Procedure for overensstemmelsesvurdering (Støj) ▪ Procedure van de conformiteitsbeoordeling (geluid) ▪ Vastavushindamismenetlus (müra)

▪ Vaatimustenmukaisuuden arviointimenettely (Melu) ▪ Procédure d’évaluation de conformité (bruit) ▪ Konformitätsbeurteilungsverfahren

(Geräusch) ▪ Διαδικασία Αξιολόγησης Συμμόρφωσης (Θόρυβος) ▪ Megfelelőség-értékelési eljárás (Zaj) ▪ Procedura di valutazione della

conformità (rumore) ▪ Atbilstības novērtējuma procedūra (troksnis) ▪ Atitikties įvertinimo procedūra (garsas) ▪ Proċedura tal-Valutazzjoni tal-

Konformità (Ħoss) ▪ Procedura oceny zgodności (poziom hałasu) ▪ Processo de avaliação de conformidade (nível sonoro) Procedura de

evaluare a conformităţii (zgomot) ▪ Postup vyhodnocovania zhodnosti (hluk) ▪ Postopek za ugotavljanje skladnosti (hrup) ▪ Procedimiento de

evaluación de conformidad (ruido) ▪ Procedur för bedömning av överensstämmelse (buller)

2000/14/EC Annex VI Part 1

UK Notified Body for 2000/14/EC ▪ Нотифициран орган в Обединеното кралство за 2000/14/ЕО ▪ Úřad certifikovaný podle směrnice č.

2000/14/EC ▪ Det britiske bemyndigede organ for 2001/14/EF ▪ Engels adviesorgaan voor 2000/14/EG ▪ Ühendkuningriigi teavitatud asutus

direktiivi 2000/14/EÜ mõistes ▪ Direktiivin 2000/14/EY mukainen ilmoitettu tarkastuslaitos Isossa-Britanniassa ▪ Organisme notifié concernant

la directive 2000/14/CE ▪ Britische benannte Stelle für 2000/14/EG ▪ Κοινοποιημένος Οργανισμός Ηνωμένου Βασιλείου για 2000/14/ΕΚ ▪

2000/14/EK – egyesült királyságbeli bejelentett szervezet ▪ Organismo Notificato in GB per 2000/14/CE ▪ 2000/14/EK AK reģistrētā

organizācija ▪ JK notifikuotosios įstaigos 2000/14/EC ▪ Korp Notifikat tar-Renju Unit għal 2000/14/KE ▪ Dopuszczona jednostka badawcza w

Wielkiej Brytanii wg 2000/14/WE ▪ Entidade notificada no Reino Unido para 2000/14/CE ▪ Organism notificat în Marea Britanie pentru

2000/14/CE ▪ Notifikovaný orgán Spojeného kráľovstva pre smernicu 2000/14/ES ▪ Britanski priglašeni organ za 2000/14/ES ▪ Cuerpo

notificado en el Reino Unido para 2000/14/CE ▪ Anmält organ för 2000/14/EG i Storbritannien

Smithco West Inc.

200 West Poplar Avene

Cameron, WI 54822 USA

Operator Ear Noise Level ▪ Оператор на нивото на доловим от ухото шум ▪ Hladina hluku v oblasti uší operátora ▪ Støjniveau i førers

ørehøjde ▪ Geluidsniveau oor bestuurder ▪ Müratase operaatori kõrvas ▪ Melutaso käyttäjän korvan kohdalla ▪ Niveau de bruit à hauteur des

oreilles de l’opérateur ▪ Schallpegel am Bedienerohr ▪ Επίπεδο θορύβου σε λειτουργία ▪ A kezelő fülénél mért zajszint ▪ Livello di potenza

sonora all’orecchio dell’operatore ▪ Trokšņa līmenis pie operatora auss ▪ Dirbančiojo su mašina patiriamo triukšmo lygis ▪ Livell tal-Ħoss fil-

Widna tal-Operatur ▪ Dopuszczalny poziom hałasu dla operatora ▪ Nível sonoro nos ouvidos do operador ▪ Nivelul zgomotului la urechea

operatorului ▪ Hladina hluku pôsobiaca na sluch operátora ▪ Raven hrupa pri ušesu upravljavca ▪ Nivel sonoro en el oído del operador ▪

Ljudnivå vid förarens öra

86 dB(A)Lwa (2006/42/EC)

DECLARATION OF CONFORMITY ▪ ДЕКЛАРАЦИЯ ЗА СЪОТВЕТСТВИЕ ▪ PROHLÁŠENÍ O SHODĚ ▪ OVERENSSTEMMELSESERKLÆRING ▪

CONFORMITEITSVERKLARING ▪ VASTAVUSDEKLARATSIOON ▪ VAATIMUSTENMUKAISUUSVAKUUTUS ▪ DECLARATION DE

CONFORMITE ▪ KONFORMITÄTSERKLÄRUNG ▪ ΔΗΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ ▪ MEGFELELŐSÉGI NYILATKOZAT ▪ DICHIARAZIONE DI

CONFORMITÀ ▪ ATBILSTĪBAS DEKLARĀCIJA ▪ ATITIKTIES DEKLARACIJA ▪ DIKJARAZZJONI TAL-KONFORMITÀ ▪ DEKLARACJA

ZGODNOŚCI ▪ DECLARAÇÃO DE CONFORMIDADE ▪ DECLARAŢIE DE CONFORMITATE ▪ VYHLÁSENIE O ZHODE ▪ IZJAVA O SKLADNOSTI

▪ DECLARACIÓN DE CONFORMIDAD ▪ DEKLARATION OM ÖVERENSSTÄMMELSE

Reference

Harmonised standards used ▪ Използвани хармонизирани стандарти ▪ Použité harmonizované normy ▪ Brugte harmoniserede standarder ▪

Gebruikte geharmoniseerde standaards ▪ Kasutatud ühtlustatud standardid ▪ Käytetyt yhdenmukaistetut standardit ▪ Normes harmonisées

utilisées ▪ Angewandte harmonisierte Normen ▪ Εναρμονισμένα πρότυπα που χρησιμοποιήθηκαν ▪ Harmonizált szabványok ▪ Standard

armonizzati applicati ▪ Izmantotie saskaņotie standarti ▪ Panaudoti suderinti standartai ▪ Standards armonizzati użati ▪ Normy spójne

powiązane ▪ Normas harmonizadas usadas ▪ Standardele armonizate utilizate ▪ Použité harmonizované normy ▪ Uporabljeni usklajeni

standardi ▪ Estándares armonizados utilizados ▪ Harmoniserade standarder som används

ANSI/OPEI B71.4:2012

BS EN ISO 13857

BS EN 349: 1993+A1:2008

Technical standards and specifications used ▪ Използвани технически стандарти и спецификации ▪ Použité technické normy a specifikace

▪ Brugte tekniske standarder og specifikationer ▪ Gebruikte technische standaards en specificaties ▪ Kasutatud tehnilised standardid ja

spetsifikatsioonid ▪ Käytetyt tekniset standardit ja eritelmät ▪ Spécifications et normes techniques utilisées ▪ Angewandte technische Normen

und Spezifikationen ▪ Τεχνικά πρότυπα και προδιαγραφές που χρησιμοποιήθηκαν ▪ Műszaki szabványok és specifikációk ▪ Standard tecnici

e specifiche applicati ▪ Izmantotie tehniskie standarti un specifikācijas ▪ Panaudoti techniniai standartai ir techninė informacija ▪ Standards u

speċifikazzjonijiet tekniċi użati ▪ Normy i specyfikacje techniczne powiązane ▪ Normas técnicas e especificações usadas ▪ Standardele

tehnice şi specificaţiile utilizate ▪ Použité technické normy a špecifikácie ▪ Uporabljeni tehnični standardi in specifikacije ▪ Estándares y

especificaciones técnicas utilizadas ▪ Tekniska standarder och specifikationer som används

ISO 3767-1 BS EN ISO 5349-

BS EN ISO 5349-2

The place and date of the declaration ▪ Място и дата на декларацията ▪ Místo a datum prohlášení ▪ Sted og dato for erklæringen ▪ Plaats

en datum van de verklaring ▪ Deklaratsiooni väljastamise koht ja kuupäev ▪ Vakuutuksen paikka ja päivämäärä ▪ Lieu et date de la

déclaration ▪ Ort und Datum der Erklärung ▪ Τόπος και ημερομηνία δήλωσης ▪ A nyilatkozat kelte (hely és idő) ▪ Luogo e data della

dichiarazione ▪ Deklarācijas vieta un datums ▪ Deklaracijos vieta ir data ▪ Il-post u d-data tad-dikjarazzjoni ▪ Miejsce i data wystawienia

deklaracji ▪ Local e data da declaração ▪ Locul şi data declaraţiei ▪ Miesto a dátum vyhlásenia ▪ Kraj in datum izjave ▪ Lugar y fecha de la

declaración ▪ Plats och datum för deklarationen

Smithco West Inc.

200 West Poplar Avenue

Cameron, WI 54822 USA

15-Mar-18

Signature of the person empowered to draw up the declaration on behalf of the manufacturer, holds the technical documentation and is

authorised to compile the technical file, and who is established in the Community.Подпис на човека, упълномощен да състави

декларацията от името на производителя, който поддържащтехническата документация и е оторизиран да изготви техническия

файл и е регистриран в общността.Podpis osoby oprávněné sestavit prohlášení jménem výrobce, držet technickou dokumentaci a osoby

oprávněnésestavit technické soubory a založené v rámci Evropského společenství.Underskrift af personen, der har fuldmagt til at udarbejde

erklæringen på vegne af producenten, der er indehaveraf dokumentationen og er bemyndiget til at udarbejde den tekniske journal, og som er

baseret i nærområdet.Handtekening van de persoon die bevoegd is de verklaring namens de fabrikant te tekenen, de

technischedocumentatie bewaart en bevoegd is om het technische bestand samen te stellen, en die is gevestigd in het

Woongebied.Ühenduse registrisse kantud isiku allkiri, kes on volitatud tootja nimel deklaratsiooni koostama, kes omab

tehnilistdokumentatsiooni ja kellel on õigus koostada tehniline toimik.Sen henkilön allekirjoitus, jolla on valmistajan valtuutus vakuutuksen

laadintaan, jolla on hallussaan teknisetasiakirjat, joka on valtuutettu laatimaan tekniset asiakirjat ja joka on sijoittautunut yhteisöön.Signature

de la personne habilitée à rédiger la déclaration au nom du fabricant, à détenir la documentationtechnique, à compiler les fichiers techniques

et qui est implantée dans la Communauté.Unterschrift der Person, die berechtigt ist, die Erklärung im Namen des Herstellers abzugeben, die

dietechnischen Unterlagen aufbewahrt und berechtigt ist, die technischen Unterlagen zusammenzustellen,und die in der Gemeinschaft

niedergelassen ist.Υπογραφή ατόμου εξουσιοδοτημένου για την σύνταξη της δήλωσης εκ μέρους του κατασκευαστή, ο οποίοςκατέχει την

τεχνική έκθεση και έχει την εξουσιοδότηση να ταξινομήσει τον τεχνικό φάκελο και ο οποίος είναιδιορισμένος στην Κοινότητα.A gyártó

nevében meghatalmazott személy, akinek jogában áll módosítania a nyilatkozatot, a műszakidokumentációt őrzi, engedéllyel rendelkezik a

műszaki fájl összeállításához, és aki a közösségbenletelepedett személy.Firma della persona autorizzata a redigere la dichiarazione a nome

del fabbricante, in possesso Delladocumentazione tecnica ed autorizzata a costituire il fascicolo tecnico, che deve essere stabilita nella

Comunità.Tās personas paraksts, kura ir pilnvarota deklarācijas sastādīšanai ražotāja vārdā, kurai ir tehniskādokumentācija, kura ir

pilnvarota sagatavot tehnisko reģistru un kura ir apstiprināta Kopienā.Asmuo, kuris yra gana žinomas, kuriam gamintojas suteikė įgaliojimus

sudaryti šią deklaraciją, ir kuris jąpasirašė, turi visą techninę informaciją ir yra įgaliotas sudaryti techninės informacijos dokumentą.Il-firma tal-

persuna awtorizzata li tfassal id-dikjarazzjoni f’isem il-fabbrikant, għandha d-dokumentazzjoniteknika u hija awtorizzata li tikkompila l-fajl

tekniku u li hija stabbilita fil-Komunità.Podpis osoby upoważnionej do sporządzenia deklaracji w imieniu producenta, przechowującej

dokumentacjętechniczną, upoważnioną do stworzenia dokumentacji technicznej oraz wyznaczonej ds. wspólnotowych.Assinatura da pessoa

com poderes para emitir a declaração em nome do fabricante, que possui a documentaçãotécnica, que está autorizada a compilar o

processo técnico e que está estabelecida na Comunidade.Semnătura persoanei împuternicite să elaboreze declaraţia în numele

producătorului, care deţine documentaţiatehnică, este autorizată să compileze dosarul tehnic şi este stabilită în Comunitate.Podpis osoby

poverenej vystavením vyhlásenia v mene výrobcu, ktorá má technickú dokumentáciu a jeoprávnená spracovať technické podklady a ktorá je

umiestnená v Spoločenstve.Podpis osebe, pooblaščene za izdelavo izjave v imenu proizvajalca, ki ima tehnično dokumentacijo in

lahkosestavlja spis tehnične dokumentacije, ter ima sedež v Skupnosti.Firma de la persona responsable de la declaración en nombre del

fabricante, que posee la documentación técnicay está autorizada para recopilar el archivo técnico y que está establecido en la

Comunidad.Undertecknas av den som bemyndigad att upprätta deklarationen å tillverkarens vägnar, innehar den tekniskadokumentationen

och är bemyndigad att sammanställa den tekniska informationen och som är etablerad igemenskapen

2006/42/EC Annex II 1A: 2

John Moore

Sales, Director, Owner

Moore Turf Care

Thieplatz 4

49583 Lienen Germany

23-Sep-19

2006/42/EC Annex II 1A: 10

Dawn Bryngelson

Technical Documentation Advisor

Smithco Inc.

34 West Avenue

Wayne, PA USA 19087-3311

10-Dec-09

Certificate Number ▪ Номер на сертификат ▪ Číslo osvědčení ▪ Certifikatnummer ▪ Certificaatnummer ▪ Sertifikaadi number ▪

Hyväksyntänumero ▪ Numéro de certificat ▪ Bescheinigungsnummer ▪ Αριθμός Πιστοποιητικού ▪ Hitelesítési szám ▪ Numero del certificato ▪

Sertifikāta numurs ▪ Sertifikato numeris ▪ Numru taċ-Ċertifikat ▪ Numer certyfikatu ▪ Número do Certificado ▪ Număr certificat ▪ Číslo

osvedčenia ▪ Številka certifikata ▪ Número de certificado ▪ Certifikatsnummer

767502020-1

Introduction Operation Diagrams Reference

QUICK REFERENCE REPLACEMENT PARTS

REPLACEMENT FILTERS

60-215 Hydraulic Oil Filter Element

76-487 Engine Oil lter Briggs # 842921

76-395-01 Air Cleaner Cartridge Briggs # 841497

76-395-02 Safety Filter Cartridge Briggs # 821136

50-403 Fuel Filter

REPLACEMENT BELTS

76-621 Belt, 3V x 590 3per

SEAL KITS

76-559 Orbitrol

15-301-01 Seal Kit

76-482 Hydrostatic Pump (Gas)

77-239-22 Seal Kit

76-539 Reel Motor

30-101-11 Seal Kit

76-540 Gear Pump

76-540-01 Seal Kit

76-543 RH Wheel Motor

14-080 Seal Kit

76-542 LH Wheel Motor

14-080 Seal Kit

76-242 Hydraulic Cylinder (Hopper)

76-242-01 Seal Kit

15-839 HydraulicCylinder (Tailgate & Steering)

14-531 Seal Kit

76-478 Hydraulic Cylinder (Reel)

14-531 Seal Kit

FLUIDS

Engine Oil SJ or Higher 10W-30

Hydraulic Fluid SJ or Higher 10W-40

OTHER PARTS

13-488 Key Switch

76-354 2

# ABC Dry Chemical Fire Extinguisher

The Smithco Commercial Products Two-Year Limited Warranty

Smithco, Inc. (Smithco) warrants your 2016 or newer Smithco Commercial Product (“Product”) purchased after

October 1, 2016 to be free from defects in materials or workmanship for the period of time listed below. Where a

warrantable condition exists, Smithco will repair the Product at no cost to you including diagnosis, labor (at the

Smithco standard labor rate, subject to the Smithco at rate schedule), and parts.

Warranty Duration is:

(1) Two years, 1500 operational hours* from the date of delivery to the original purchaser or Five years from

the date of original manufacturer of the product, whichever occurs rst. (*Products equipped with hour

meter).

(2) Products used in rental situations are covered for 90 days from date of delivery to original user/renter.

Owner Responsibilities:

As the Product owner, you are responsible for required maintenance and adjustments stated in your Owner’s Manual.

Failure to perform required maintenance and adjustments can be grounds for disallowing a warranty claim. You are

particularly responsible to train all present and future operators of this product on the safe operation of this

product at your location.

Instructions for Obtaining Warranty Service:

You are responsible for notifying the Authorized Smithco Products Distributor from whom you purchased the Product as

soon as you believe a warrantable condition exists and not later than 30 days from discovery of the condition.

If you need help locating an Authorized Smithco Distributor, or if you have questions regarding your warranty rights or

responsibilities, you may contact us at:

Smithco Product Support Department

200 West Poplar Ave.

Cameron, Wisconsin 54822

Telephone: 800-891-9435 E-Mail: [email protected]

Maintenance Parts:

Parts scheduled for replacement as required maintenance (“Maintenance Parts”), are warranted for the period of time up

to the scheduled replacement time for that part.

Items/Conditions Not Covered:

Not all product failures or malfunctions that occur during the warranty period are defects in materials or workmanship.

The items/conditions listed below are not covered by this warranty:

Product failures which result from the use of non-Smithco replacement parts, or from installation and use of add-

on, modied, or unapproved accessories are not covered.

Product failures which result from failure to perform required maintenance and/or adjustments are not covered.

Product failures that result from operating the Product in an abusive, negligent or reckless manner are noT

covered.

This warranty does not apply to parts subject to consumption through use, unless found to be defective.

Examples of parts which are consumed, or used up, during normal Product operation include, but are not limited

to: blades, tines, teeth, scariers, rakes, plates, wear plates, castor wheels, tires, batteries, lters, belts, nozzles,

etc.

This warranty does not apply to failures caused by outside inuence. Items considered to be outside inuence

include, but are not limited to, weather, storage practices, contamination, use of unapproved coolants, lubricants,

additives, or chemicals, etc.

This warranty does not apply to normal “wear and tear” items. Normal “Wear and Tear” includes, but is not limited

to, damage to seats due to wear or abrasion, worn painted surfaces, scratched decals or windows, etc.

Smithco may require the return of failed parts or components in order to determine the validity of any warranty

claim.

Smithco will not be obligated to replace components of other manufacturers if inspection by the original

component manufacturer indicates that failure was due to normal wear and tear, expected consumption through

use or improper care or service.

Other Legal Disclaimers:

The above remedy for product defects through repair or replacement by an authorized Smithco distributor or dealer is the

purchaser’s sole remedy for any defect. This warranty gives you specic legal rights, and you may also have other rights

which vary from state to state.

THERE ARE NO OTHER EXPRESS WARRANTIES OTHER THAN THOSE SET FORTH ABOVE. ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE DURATION OF THE

LIMITED WARRANTIES CONTAINED HEREIN.

Some states may not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to

you.

THE SMITHCO COMPANY IS NOT LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE USE OF THE PRODUCT, INCLUDING ANY COST OR EXPENSE OF

PROVIDING A SUBSTITUTE PRODUCT OR SERVICE DURING PERIODS OF MALFUNCTION OR NON-USE.

Some states may not allow the exclusion of indirect, incidental or consequential damages, so the above exclusion may

not apply to you.

Smithco neither assumes, nor authorizes any person to assume for it, any other liability in connection with the

sale or use of this product.

Smithco Sweep Star 60-QUAD – 2016 Manualul proprietarului

Marca: Smithco

Model: Sweep Star 60-QUAD – 2016

Categorie: Accesorii pentru autovehicule

Tip: Manualul proprietarului

Acest manual este potrivit și pentru

Sweep Star 60-QUAD – 2019

Descărcați PDF

raport

în alte limbi

English: Smithco Sweep Star 60-QUAD – 2016 Owner's manual
eesti: Smithco Sweep Star 60-QUAD – 2016 Omaniku manuaal

Smithco Sweep Star 60-QUAD – 2016 Manualul proprietarului

Acest manual este potrivit și pentru

Smithco Sweep Star 60-QUAD – 2016 Manualul proprietarului

în alte limbi

Lucrări înrudite

Alte documente