Smithco Super Star LE Instrucțiuni de utilizare

Marca: Smithco

Model: Super Star LE

Tip: Instrucțiuni de utilizare

Super Star LE

42-400-A

March 2014

Product Support: Hwy SS & Poplar Ave; Cameron WI 54822

1-800-891-9435 productsupport@smithco.com

Operator’s

Introduction Service Diagrams

CONTENTS

Introduction.................................................... 1-12

Introduction ...................................................................................... 1

Symbols.........................................................................................2-3

Safe Practices.................................................................................. 4

Super Star Diesel Specifications....................................................... 5

Euro Star Specifications .................................................................. 6

Setup ............................................................................................... 7

Controls & Instruments Euro Star ..................................................... 8

Controls & Instruments Super Star Diesel......................................... 9

Operation ........................................................................................10

Daily Checklist ................................................................................11

How To Rake A Sand Trap ..............................................................12

Service............................................................... 13

Battery ............................................................................................13

Other .................................................................. 14

Declaration of Conformity.................................................................14

Limited Warranty .................................................... Inside Back Cover

Introduction

PARTS MANUALS AVAILABLE ONLINE AT smithco.com

Information needed when ordering replacement parts:

1. Model Number of machine

2. Serial Number of machine

3. Name and Part Number of part

4. Quantity of parts

INTRODUCTION

Thank you for purchasing a

SmithcoSmithco

Smithco

product.

Read this manual and all other manuals pertaining to the Bunker Rake carefully as they contain safety, operat-

ing, assembly and maintenance instructions. Failure to do so could result in personal injury or equipment dam-

age.

Keep manuals in a safe place after operator and maintenance personnel have read them. Right and left sides

are from the operator’s seat, facing forward.

All

SmithcoSmithco

Smithco machines have a Serial Number and Model Number. Both numbers are needed when ordering

parts. Refer to engine manual for placement of engine serial number.

The serial number plate on the Super Rakes is located on the right side main frame.

The serial number plate for the Super Star is located on the rear axle.

For easy access record your Serial and Model numbers here.

Introduction

PARTS MANUALS AVAILABLE ONLINE AT smithco.com

SYMBOLS

Park Brake

Release

Hydraulic Oil

Level

Choke - OpenChoke - ClosedHand Throttle

Hour Meter Hour Meter Fuse

Glow PlugGlow Plug - OffGlow Plug - On

RPM Gasoline Diesel

Water

Temperature

Light

Engine Oil

Engine - Stop Engine - Start Engine - Run

No Electrical

Power

Electrical Power

Read

Operator’s

Manual

Introduction

PARTS MANUALS AVAILABLE ONLINE AT smithco.com

SYMBOLS

No Smoking Moving Parts

Manual

Operation

Pinch Point

Step Hot Surface

Hydraulic Fluid

Penetration

Lift Arm Tractor

Engage Disengage PTO

Ground Speed Fast Slow

High

Low

Forward

Reverse

Neutral

Warning

Danger

Caution

Up/RaiseDown/LowerUp/Down Arrow

SAFE PRACTICES

1. It is your responsibility to read this manual and all publications associated with this machine (engine,

accessories and attachments).

2. Never allow anyone to operate or service the machine or its attachments without proper training and

instructions. Never allow minors to operate any equipment.

3. Learn the proper use of the machine, the location and purpose of all the controls and gauges before you

operate the equipment. Working with unfamiliar equipment can lead to accidents.

4. Wear all Personal Protective Equipment (PPE) on your head, eyes, ears, hands and feet. Operate the

machine only in daylight or in good artificial light.

5. Inspect the area where the equipment will be used. Pick up all debris you can find before operating.

Beware of overhead obstructions and underground obstacles. Stay alert for hidden hazards.

6. Never operate equipment that is not in perfect working order or without decals, guards, shields, or other

protective devices in place.

7. Never disconnect or bypass any switch.

8. Carbon monoxide in the exhaust fumes can be fatal when inhaled, never operate a machine without

proper ventilation.

9. Fuel is highly flammable, handle with care.

10. Keep engine clean. Allow the engine to cool before storing and always remove the ignition key.

11. After engine has started machine must not move. If movement is evident, the neutral mechanism is not

adjusted correctly. Shut engine off and readjust so the machine does not move when in neutral position.

13. Never use your hands to search for oil leaks. Hydraulic fluid under pressure can penetrate the skin and

cause serious injury.

14. This machine demands your attention. To prevent loss of control or tipping of the vehicle:

A. Use extra caution in backing up the vehicle. Ensure area is clear.

B. Do not stop or start suddenly on any slope.

C. Reduce speed on slopes and in sharp turns. Use caution when changing directions on slopes.

D. Stay alert for holes in the terrain and other hidden hazards.

15. Before leaving operator’s position for any reason:

A. Disengage all drives.

B. Lower all attachments to the ground.

C. Set park brake.

D. Shut engine off and remove the ignition key.

16. Keep hands, feet and clothing away from moving parts. Wait for all movement to stop before you clean,

adjust or service the machine.

17. Keep the area of operation clear of all bystanders.

18. Never carry passengers.

19. Stop engine before making repairs/adjustments or checking/adding oil to the crankcase.

20. Use parts and materials supplied by

SmithcoSmithco

Smithco only. Do not modify any function or part.

hese machines are intended for professional maintenance on golf courses, sports turf, and any other

area maintained turf and related trails, paths and lots. No guaranty as to the suitability for any task is

expressed or implied.

SPECIFICATION SUPER STAR LE

WEIGHTS AND DIMENSIONS

Length 64" (163 cm)

Width 57" (145 cm)

Height 47" (119 cm)

Wheel Base 51" (104 cm)

Weight 950 lbs. (451 kg)

SOUND LEVEL

At ear level 85 dB

At 3 ft. (0.914 m) 83 dB

At 30 ft. (9.14 m) 73 dB

ENGINE

Make Briggs and Stratton Vanguard

Model# 303447

Type / Spec # 1131E1

Horsepower 16 hp (12 kW)

Fuel Unleaded 87 Octane (min)

Cooling System Air Cooled

Lubrication System Pressure Type

Alternator 16 AMP

SPEED

Forward Speed 0 to 11 m.p.h. (0-18 kph)

Reverse Speed 0 to 5 m.p.h. (0-8 kph)

TIRES & WHEELS

All Tires **Three 22 x 11 x 10.00 Knobby Tires

5 psi (.34 bar)

BATTERY Automotive Type 45-12 Volt

BCI Group Size 45

Cold Cranking Amps 480

Ground Terminal Polarity Negative (-)

Maximum Length 9" (23 cm)

Maximum Width 5.38" (14 cm)

Maximum Height 9" (23 cm)

FLUID CAPACITY

Crankcase Oil See Engine Manual

Fuel 20 quarts (19 liters)

Hydraulic Fluid 20 quarts (19 liters)

Grade of Hydraulic Fluid SAE 10W-40 API Service

SJ or Higher Motor Oil

** Front tire fluid filled to 80 lbs. (36 kg) total.

45.5 pints of windshield washer fluid or equivalent.

Introduction

PARTS MANUALS AVAILABLE ONLINE AT smithco.com

SETUP

The Bunker Rakes arrive from

SmithcoSmithco

Smithco with some assembly required before service.

1. Set park brake. Push the brake down past center and

the park brake is engaged.

2. Rear wheel mounting. Block front tire. Jack up rear of

machine being careful not to damage underside of

machine. Place wheel on hub lining up bolt holes. Use

the ten lug nuts provided. Then torque to 64 - 74 ft/lb

(87-100 Nm) using a cross pattern. Retorque after the

first 10 hours and every 200 hours thereafter. Lower

machine to ground and remove blocks and jack.

3. Install steering wheel (Ref 1) on machine. Put steer-

ing wheel onto shaft (Ref 3) Line up holes and insert

/4 x 2" Roll Pin (Ref 2) into wheel shaft. Tighten set

screw.

4. Check the tire pressure. The tire pressure should be

5 psi (0.34 bar)

5. Battery not furnished. Install an automotive type 45 -12

volt; 480 cold cranking amps (minimum) battery in the

battery box of the Super Star. This is a negative

grounding system. Attach the battery hold-downs.

Then attach red positive (+) cable (A) to positive

terminal. Slide rubber boot over the positive terminal

to prevent shorts. Attach black negative (-) cable (B) to

the negative terminal.

Connecting battery cables to the wrong post

could result in personal injury and/or damage

to the electrical system. Make sure battery and

cables do not interfere or rub on any moving

part. Connect the red positive (+) cable (A) to

the battery first. When disconnecting remove

the black negative (-) cable (B) first.

6. Check engine oil and add as necessary. See engine manual for recommended motor oil. DO NOT

OVERFILL.

7. Fill Gas Tanks with Unleaded 87 Octane gasoline (minimum).

Fuel is flammable. Caution must be used when storing or handling it. Do not fill fuel tank

while engine is operating or in an enclosed area. Fumes are explosive and dangerous to

inhale. DO NOT SMOKE while filling the fuel tank. DO NOT OVERFILL.

8. Check hydraulic oil level on the tank. The level should be

2 -2

/2"(5 - 6.35 cm) from top of tank. If level is

low, add SAE 10W-40 API Service SJ or higher motor oil.

9. Machine should be greased before starting.

10. Read operating instructions before starting machine.

Introduction

PARTS MANUALS AVAILABLE ONLINE AT smithco.com

CONTROLS & INSTRUMENTS SUPER STAR LE

INSTRUMENTS LOCATED ON THE CONTROL PANEL

A. Electric On/Off Valve Switch - Toggle switch that turns 2 Wheel to

3 Wheel Drive. For 42-117 Optional Electric Valve Kit.

B. Oil Light - The oil light should come on when ignition is on without

engine operating. The oil light will light when the oil pressure is low.

If oil light should come on, shut off engine immediately and find the

cause.

C. Ignition Switch - The ignition switch has three positions: Off-Run-

Start.

D. Choke - Pull choke control knob up to close choke plate when

starting a cold engine. A warm engine may not require "choking" to

start.

E. Hand Throttle - The hand throttle is used to regulate engine

speed.

F. Blower - This is an optional switch that comes with the Leaf and Debris Blower.

G. Light - This is an optional switch that comes with the Light Kit.

STEERING

Acquaint yourself with the steering before operating the machine. This machine is equipped with a tilt steering mecha-

nism. The lever to tilt the steering wheel is located at bottom of rubber boot on steering column. Hold the lever down and

adjust the steering wheel to a comfortable position.

RAKE LIFT LEVER

This lever (H) raises and lowers all rear attachments. To raise push forward, to

lower pull back. Release the lever when attachment is in proper position and

lever will return to neutral.

LIFT ASSEMBLY LEVER

This lever (J) raises and lowers all attachments under the center of the ma-

chine. To raise push forward, to lower pull back. Release the lever when at-

tachment is in proper position and lever will return to neutral.

SEAT ADJUSTMENT

Seat adjustment lever is located under front of seat on left side. It allows seat

adjustment forward or backward for operator's comfort. The seat also has the

start safety switch in it. To start the Super Star the operator must be sitting on the seat.

RIGHT FLOORBOARD

Foot Pedal controls forward and reverse motion. Pushing down on the front of

pedal (K) will give you a forward motion and pushing down on rear pedal (L)

will give you a reverse motion. When pedal is released the hydrostatic trans-

mission centers and stops the vehicle. Ground speed is proportional to how far

the foot pedal is depressed.

HOUR METER

Located on the right front fiberglass cowling. The hour meter indicates hours of machine operation. The hour meter

operates when ignition switch is on.

Introduction

PARTS MANUALS AVAILABLE ONLINE AT smithco.com

OPERATION AND DAILY CHECK LIST

STARTING ENGINE

Before operating this machine, become familiar with all controls and functions of these units. Also complete all

maintenance requirements and read all safety warnings. By knowing the machine thoroughly, how it operates

and by doing the prescribed maintenance steps, you can expect relatively trouble-free operation for years to

come.

1. Make sure the fuel flow valve, located on the fuel tank, is “ON.”

2. Set park brake. Start safety switch is on the park brake.

3. The ignition switch is a three position.

Insert key (A) and turn clockwise

until engine starts (C). Release key and it will return to run position (B).

Use choke and hand throttle as necessary.

4. Allow engine to idle and warm up a few minutes before selecting a

direction of travel.

5. To shut off engine on all gas machines turn key to the stop position.

COLD WEATHER STARTING

When attempting to start the engine in cold weather, the oil in the hydrostat pump may provide too much resis-

tance to start a cold machine.

Before attempting to start the engine in cold weather, disengage the drive belt to the hydrostat by pushing

down the idler lever until it catches in the notch on the latching lever. Start engine and allow it to warm up with

no load. When the engine is warm, shut off engine. Push down on the latching lever until the idler is released.

Engine must be stopped when the drive belt is engaged. If the engine is running when the belt is en-

gaged, the vehicle may move suddenly, injuring you and/or bystanders.

Always stop the engine before reengaging the drive belt. The sudden application of power to the

hydrostat may cause serious damage the pump, the engine or both.

Introduction

PARTS MANUALS AVAILABLE ONLINE AT smithco.com

DAILY CHECKLIST

Use all procedures and parts prescribed by the manufacturer's. Read the engine manual

before operation.

The suggested maintenance checklist is not offered as a replacement for the manufacturer’s but as a supple-

ment. You must adhere to guidelines established by manufacturer for warranty coverage. In adverse conditions

such as dirt, mud or extreme temperatures, maintenance should be more frequent.

DAILY CHECKLIST

1. Check park brake adjustment. Adjust as required.

2. Check engine oil level. Add as needed. DO NOT OVERFILL.

3. Tire pressure should be 8 psi (0.55 bar) maximum.

4. Inspect electrical system for loose connections or frayed wiring, including battery cables. Replace any

faulty equipment or tighten if loose.

5. Check hardware for loose or missing nuts, bolts, screws, etc., and tighten or replace as needed.

6. Inspect hydraulic lines for damage or leaks. Never use hands to inspect leaks.

7. Check hydraulic oil level on the tank. The level should be

2 -2

/2"(5 - 6.35 cm) from top of tank. If level is

low, add SAE 10W-40 API Service SJ or higher motor oil.

8. Inspect steering, throttle and shift linkages for good hookups and clear travel.

9. Check anti-vibration mounts on engine frame.

10. Check controls for smooth, proper working operation. Lubricate as needed.

11. Remove debris from engine compartment

Service

HOW TO RAKE A SAND TRAP

View bunker to determine the most efficient pattern to follow so that rake pattern and configuration of bunker

will flow in same general direction and look attractive.

Enter bunker at its lowest point. Perhaps drain area or another point where “lip” of the trap is minimal.

Operate at 2-4 m.p.h. (3-6.5 kph) for best raking results. Control speed with hydraulic pedal.

Once fully inside bunker, lower rear rake and proceed forward as described above.

First pass should be directly down center of trap. This helps avoid ex-

tremely sharp turns that will spoil sands’ appearance.

Once at far end, turn machine and

drive down one side

of trap and come

back up other side.

Grass or other material

may build up on rake

tines as machine passes

“enter/exit” point in Figure

1. Lift rake briefly while still

moving forward.

Do not rake closer than 6" (15

cm) to edge of trap.

Do not rake slopes in trap. The

weight of machine will pull sand down.

Use cultivator or other center mounted accessories only as necessary for compacted sand. Frequent use will

leave sand too soft and objectionable to some golfers.

Use front mounted plow to push sand to desired locations within trap.

After exiting trap, secure machines in accordance with practices described in this manual. Rake trap edges,

slopes and “enter /exit” area with a hand rake.

After returning to maintenance area, thoroughly clean machine, check fluids, and lubricate as advised in this

manual.

Diagrams

BATTERY

Batteries normally produce explosive gases which can cause personal injury. Do not allow flames, sparks or any ignited

object to come near the battery. When charging or working near battery, always shield your eyes and always provide

proper ventilation.

Battery cable should be disconnected before using "Fast Charge".

Charge battery at 15 amps for 10 minutes or 7 amps for 30 minutes. Do not exceed the recommended charging rate. If

electrolyte starts boiling over, decrease charging.

Always remove grounded (-) battery clamp first and replace it last. Avoid hazards by:

1. Filling batteries in well-ventilated areas.

2. Wear eye protection and rubber gloves.

3. Avoid breathing fumes when electrolyte is added.

4. Avoid spilling or dripping electrolyte.

Battery Electrolyte is an acidic solution and should be handled with care. If electrolyte is splashed on

any part of your body, flush all contact areas immediately with liberal amounts of water. Get medical

attention immediately.

JUMP STARTING

Use of booster battery and jumper cables. Particular care should be used when connecting a booster

battery. Use proper polarity in order to prevent sparks.

To jump start (negative grounded battery):

1. Shield eyes.

2. Connect ends of one cable to positive (+) terminals of

each battery, first (A) then (B).

3. Connect one end of other cable to negative (-)

terminal of "good" battery (C).

4. Connect other end of cable (D) to engine block on

unit being started (NOT to negative (-) terminal of

battery)

To prevent damage to other electrical components on unit

being started, make certain that engine is at idle speed

before disconnecting jumper cables.

DECLARATIONOFCONFORMITYƒʪʫʶʸʤˀʤˉʰ˔ʯʤˁˎʽ˃ʦʫ˃ˁ˃ʦʰʫƒPROHLÁŠENÍOSHOD ƒOVERENSSTEMMELSESERKLÆRINGƒ

CONFORMITEITSVERKLARINGƒVASTAVUSDEKLARATSIOONƒVAATIMUSTENMUKAISUUSVAKUUTUSƒDECLARATIONDE

CONFORMITEƒKONFORMITÄTSERKLÄRUNGƒȴȸȿёɇȸɇɉɀɀɃɆɌёɇȸɇƒMEGFELELSSÉGINYILATKOZATƒDICHIARAZIONEDI

CONFORMITÀƒATBILST5BASDEKLARCIJAƒATITIKTIESDEKLARACIJAƒDIKJARAZZJONITALͲKONFORMITÀƒDEKLARACJA

ZGODNO_CIƒDECLARAÇÃODECONFORMIDADEƒDECLARAfIEDECONFORMITATEƒVYHLÁSENIEOZHODEƒIZJAVAOSKLADNOSTI

ƒDECLARACIÓNDECONFORMIDADƒDEKLARATIONOMÖVERENSSTÄMMELSE

Business name and full address of the manufacturer ƒ Ɍɴɪɝɨɜɫɤɨ ɢɦɟ ɢ ɩɴɥɟɧ ɚɞɪɟɫ ɧɚ ɩɪɨɢɡɜɨɞɢɬɟɥɹ ƒ Obchodní jméno a plná adresa

výrobce ƒ Producentens firmanavn og fulde adresse ƒ Bedrijfsnaam en volledig adres van de fabrikant ƒ Tootja ärinimi ja täielik aadress ƒ

Valmistajan toiminimi ja täydellinen osoite ƒ Nom commercial et adresse compl ète du fabricant ƒ Firmenname und vollständige Adresse des

Herstellers ƒ ǼʌȦȞȣȝȓĮ țĮȚ ĲĮȤȣįȡȠȝȚțȒ įȚİȪșȣȞıȘ țĮĲĮıțİȣĮıĲȒ ƒ A gyártó üzleti neve és teljes címe ƒ Ragione sociale e indirizzo completo

del fabbricante ƒ UzƼƝmuma nosaukums un pilna ražotƗja adrese ƒ Verslo pavadinimas ir pilnas gamintojo adresas ƒ Isem kummerƛjali u

indirizz sƫiƫ tal-fabbrikant ƒ Nazwa firmy i peány adres producenta ƒ Nome da empresa e endereço completo do fabricante ƒ Denumirea

comercială úi adresa completă a producătorului ƒ Obchodný názov a úplná adresa výrobcu ƒ Naziv podjetja in polni naslov proizvajalca ƒ

Nombre de la empresa y dirección completa del fabricante ƒ Tillverkarens företagsnamn och kompletta adress

Smithco Inc.

34 West Avenue

Wayne, PA USA

19087-3311

Product Code ƒ Ʉɨɞ ɧɚ ɩɪɨɞɭɤɬɚ ƒ Kód výrobku ƒ Produktkode ƒ Productcode ƒ Toote kood ƒ Tuotekoodi ƒ Code produit ƒ Produktcode ƒ

ȀȦįȚțȩȢ ʌȡȠȧȩȞĲȠȢ ƒ Termékkód ƒ Codice prodotto ƒ Produkta kods ƒ Produkto kodas ƒ Kodiƛi tal-Prodott ƒ Kod produktu ƒ Código do Produto ƒ

Cod

rodus ƒ Kód v

robku ƒ Oznaka

roizvoda ƒ Códi

o de

roducto ƒ Produktkod

42Ͳ001/42Ͳ000/42Ͳ400

Machine Name ƒ ɇɚɢɦɟɧɨɜɚɧɢɟ ɧɚ ɦɚɲɢɧɚɬɚ ƒ Název stroje ƒ Maskinnavn ƒ Machinenaam ƒ Masina nimi ƒ Laitteen nimi ƒ Nom de la machine

ƒ Maschinenbezeichnung ƒ ȅȞȠȝĮıȓĮ ȝȘȤĮȞȒȝĮĲȠȢ ƒ Gépnév ƒ Denominazione della macchina ƒ IekƗrtas nosaukums ƒ Mašinos pavadinimas ƒ

Isem tal-Magna ƒ Nazwa urządzenia ƒ Nome da Máquina ƒ Numele echipamentului ƒ Názov stroja ƒ Naziv stroja ƒ Nombre de la máquina ƒ

Maskinens namn

Smithco Super Star

Designation ƒ ɉɪɟɞɧɚɡɧɚɱɟɧɢɟ ƒ Oznaþení ƒ Betegnelse ƒ Benaming ƒ Nimetus ƒ Tyyppimerkintä ƒ Pažym ơjimas ƒ Bezeichnung ƒ

ȋĮȡĮțĲȘȡȚıȝȩȢ ƒ Megnevezés ƒ Funzione ƒ ApzƯmƝjums ƒ Lithuanian ƒ Denominazzjoni ƒ Oznaczenie ƒ Designação ƒ SpecificaĠie ƒ Oznaþenie ƒ

Namen stro

a ƒ Descri

ción ƒ Betecknin

BunkerRake

Serial Number ƒ ɋɟɪɢɟɧ ɧɨɦɟɪ ƒ Sériové þíslo ƒ Serienummer ƒ Serienummer ƒ Seerianumber ƒ Valmistusnumero ƒ Numéro de série ƒ

Seriennummer ƒ ȈİȚȡȚĮțȩȢ ĮȡȚșȝȩȢ ƒ Sorozatszám ƒ Numero di serie ƒ SƝrijas numurs ƒ Serijos numeris ƒ Numru Serjali ƒ Numer seryjny ƒ

Número de Série ƒ Număr de serie ƒ Sériové þíslo ƒ Seri

ska številka ƒ Número de serie ƒ Serienummer

13200/5564/400180

Engine ƒ Ⱦɜɢɝɚɬɟɥ ƒ Motor ƒ Motor ƒ Motor ƒ Mootor ƒ Moottori ƒ Moteur ƒ Motor ƒ ȂȘȤĮȞȒ ƒ Modulnév ƒ Motore ƒ DzinƝjs ƒ Variklis ƒ Saƫƫa Netta

Installata ƒ Silnik ƒ Motor ƒ Motor ƒ Motor ƒ Motor ƒ Motor ƒ Motor

Briggs&Stratton0230G1

Net Installed Power ƒ ɇɟɬɧɚ ɢɧɫɬɚɥɢɪɚɧɚ ɦɨɳɧɨɫɬ ƒ ýistý instalovaný výkon ƒ Installeret nettoeffekt ƒ Netto ge ïnstalleerd vermogen ƒ

Installeeritud netovõimsus ƒ Asennettu nettoteho ƒ Puissance nominale nette ƒ Installierte Nettoleistung ƒ ȀĮșĮȡȒ İȖțĮĲİıĲȘȝȑȞȘ ȚıȤȪȢ ƒ Nettó

beépített teljesítmény ƒ Potenza netta installata ƒ ParedzƝtƗ tƯkla jauda ƒ Grynoji galia ƒ Wisa’ tal-Qtugƫ ƒ Moc zainstalowana netto ƒ Pot ência

instalada ƒ Puterea instalată netă ƒ ýistý inštalovaný výkon ƒ Neto vgrajena moþ ƒ Potencia instalada neta ƒ Nettoeffekt

12kW

Conforms to Directives ƒ ȼ ɫɴɨɬɜɟɬɫɬɜɢɟ ɫ ɞɢɪɟɤɬɢɜɢɬɟ ƒ SplĖuje podmínky smČrnic ƒ Er i overensstemmelse med direktiver ƒ Voldoet aan de

richtlijnen ƒ Vastab direktiividele ƒ Direktiivien mukainen ƒ Conforme aux directives ƒ Entspricht Richtlinien ƒ ǹțȠȜȠȣșȒıĲİ ʌȚıĲȐ ĲȚȢ ȅįȘȖȓİȢ ƒ

Megfelel az irányelveknek ƒ Conforme alle Direttive ƒ Atbilst direktƯvƗm ƒ Atitinka direktyvǐ reikalavimus ƒ Valutazzjoni tal-Konformità

Dyrektywy związane ƒ Cumpre as Directivas ƒ Respectă Directivele ƒ Je v súlade so smernicami ƒ Skladnost z direktivami ƒ Cumple con las

Directivas ƒ U

ller direktiv

2006/42/EC;

2000/14/ECAnnexVI.Part1

Conformity Assessment ƒ Ɉɰɟɧɤɚ ɡɚ ɫɴɨɬɜɟɬɫɬɜɢɟ ƒ Hodnocení plnČní podmínek ƒ Overensstemmelsesvurdering ƒ Conformiteitsbeoordeling ƒ

Vastavushindamine ƒ Vaatimustenmukaisuuden arviointi ƒ Evaluation de conformité ƒ Konformitätsbeurteilung ƒ ǻȚĮʌȓıĲȦıȘ ȈȣȝȝȩȡĳȦıȘȢ ƒ

MegfelelĘség-értékelés ƒ Valutazione della conformità ƒ AtbilstƯbas novƝrtƝjums ƒ Atitikties Ƴvertinimas ƒ Livell tal-Qawwa tal-ƪoss Imkejjel ƒ

Ocena zgodnoĞci ƒ Avaliação de Conformidade ƒ Evaluarea conformităĠii ƒ Vyhodnotenie zhodnosti ƒ Ocena skladnosti ƒ Evaluación de

conformidad ƒ Bedömnin

av överensstämmelse

2006/42/ECAnnexVIII

Measured Sound Power Level ƒ ɂɡɦɟɪɟɧɨ ɧɢɜɨ ɧɚ ɡɜɭɤɨɜɚ ɦɨɳɧɨɫɬ ƒ NamČĜený akustický výkon ƒ Målte lydstyrkeniveau ƒ Gemeten

geluidsniveau ƒ Mõõdetud helivõimsuse tase ƒ Mitattu äänitehotaso ƒ Niveau de puissance sonore mesuré ƒ Gemessener Schalldruckpegel ƒ

ȈĲĮșȝȚıȝȑȞȠ İʌȓʌİįȠ ȘȤȘĲȚțȒȢ ȚıȤȪȠȢ ƒ Mért hangteljesítményszint ƒ Livello di potenza sonora misurato ƒ Izm ƝrƯtais skaƼas jaudas lƯmenis ƒ

Išmatuotas garso stiprumo lygis ƒ Livell tal-Qawwa tal-ƪoss Iggarantit ƒ Moc akustyczna mierzona ƒ Nível sonoro medido ƒ Nivelul măsurat al

puterii acustice ƒ Nameraná hladina akustického výkonu ƒ Izmerjena raven zvoþne moþi ƒ Nivel de potencia sonora medido ƒ Uppmätt

udeffektsnivå

87dB(A)Lwa

Guaranteed Sound Power Level ƒ Ƚɚɪɚɧɬɢɪɚɧɨ ɧɢɜɨ ɧɚ ɡɜɭɤɨɜɚ ɦɨɳɧɨɫɬ ƒ Garantovaný akustický výkon ƒ Garanteret lydstyrkeniveau ƒ

Gegarandeerd geluidsniveau ƒ Garanteeritud helivõimsuse tase ƒ Taattu äänitehotaso ƒ Niveau de puissance sonore garanti ƒ Garantierter

Schalldruckpegel ƒ ǼȖȖȣȘȝȑȞȠ İʌȓʌİįȠ ȘȤȘĲȚțȒȢ ȚıȤȪȠȢ ƒ Szavatolt hangteljesítményszint ƒ Livello di potenza sonora garantito ƒ Garant Ɲtais

skaƼas jaudas lƯmenis ƒ Garantuotas garso stiprumo lygis ƒ Livell tal-Qawwa tal-ƪoss Iggarantit ƒ Moc akustyczna gwarantowana ƒ Nível sonoro

farantido ƒ Nivelul garantat al puterii acustice ƒ Garantovaná hladina akustického výkonu ƒ Zajamþena raven zvoþne moþi ƒ Nivel de potencia

sonora

arantizado ƒ Garanterad l

udeffektsnivå

88dB(A)Lwa

Conformity Assessment Procedure (Noise) ƒ Ɉɰɟɧɤɚ ɡɚ ɫɴɨɬɜɟɬɫɬɜɢɟ ɧɚ ɩɪɨɰɟɞɭɪɚɬɚ (ɒɭɦ) ƒ Postup hodnocení plnČní podmínek (hluk) ƒ

Procedure for overensstemmelsesvurdering (Støj) ƒ Procedure van de conformiteitsbeoordeling (geluid) ƒ Vastavushindamismenetlus (müra) ƒ

Vaatimustenmukaisuuden arviointimenettely (Melu) ƒ Procédure d’évaluation de conformité (bruit) ƒ Konformitätsbeurteilungsverfahren

(Geräusch) ƒ ǻȚĮįȚțĮıȓĮ ǹȟȚȠȜȩȖȘıȘȢ ȈȣȝȝȩȡĳȦıȘȢ (ĬȩȡȣȕȠȢ) ƒ MegfelelĘség-értékelési eljárás (Zaj) ƒ Procedura di valutazione della

conformità (rumore) ƒ AtbilstƯbas novƝrtƝjuma procedǌra (troksnis) ƒ Atitikties Ƴvertinimo procedǌra (garsas) ƒ Proƛedura tal-Valutazzjoni tal-

Konformità (ƪoss) ƒ Procedura oceny zgodnoĞci (poziom haáasu) ƒ Processo de avaliaç ão de conformidade (nível sonoro) Procedura de

evaluare a conformităĠii (zgomot) ƒ Postup vyhodnocovania zhodnosti (hluk) ƒ Postopek za ugotavljanje skladnosti (hrup) ƒ Procedimiento de

evaluación de conformidad (ruido) ƒ Procedur för bedömning av överensstämmelse (buller)

2000/14/ECAnnexVI

Part1

UK Notified Body for 2000/14/EC ƒ ɇɨɬɢɮɢɰɢɪɚɧ ɨɪɝɚɧ ɜ Ɉɛɟɞɢɧɟɧɨɬɨ ɤɪɚɥɫɬɜɨ ɡɚ 2000/14/ȿɈ ƒ ÚĜad certifikovaný podle smČrnice þ.

2000/14/EC ƒ Det britiske bemyndigede organ for 2001/14/EF ƒ Engels adviesorgaan voor 2000/14/EG ƒ Ühendkuningriigi teavitatud asutus

direktiivi 2000/14/EÜ mõistes ƒ Direktiivin 2000/14/EY mukainen ilmoitettu tarkastuslaitos Isossa-Britanniassa ƒ Organisme notifié concernant la

directive 2000/14/CE ƒ Britische benannte Stelle für 2000/14/EG ƒ ȀȠȚȞȠʌȠȚȘȝȑȞȠȢ ȅȡȖĮȞȚıȝȩȢ ǾȞȦȝȑȞȠȣ ǺĮıȚȜİȓȠȣ ȖȚĮ 2000/14/ǼȀ ƒ

2000/14/EK – egyesült királyságbeli bejelentett szervezet ƒ Organismo Notificato in GB per 2000/14/CE ƒ 2000/14/EK AK re ƧistrƝtƗ organizƗcija

ƒ JK notifikuotosios Ƴstaigos 2000/14/EC ƒ Korp Notifikat tar-Renju Unit gƫal 2000/14/KE ƒ Dopuszczona jednostka badawcza w Wielkiej Brytanii

wg 2000/14/WE ƒ Entidade notificada no Reino Unido para 2000/14/CE ƒ Organism notificat în Marea Britanie pentru 2000/14/CE ƒ Notifikovaný

orgán Spojeného kráĐovstva pre smernicu 2000/14/ES ƒ Britanski priglašeni organ za 2000/14/ES ƒ Cuerpo notificado en el Reino Unido para

2000/14/CE ƒ Anmält organ för 2000/14/EG i Storbritannien

Smithco

WestInc.

200WestPoplarAvene

Cameron,WI54822USA

Operator Ear Noise Level ƒ Ɉɩɟɪɚɬɨɪ ɧɚ ɧɢɜɨɬɨ ɧɚ ɞɨɥɨɜɢɦ ɨɬ ɭɯɨɬɨ ɲɭɦ ƒ Hladina hluku v oblasti uší operátora ƒ St øjniveau i førers

ørehøjde ƒ Geluidsniveau oor bestuurder ƒ Müratase operaatori kõrvas ƒ Melutaso käyttäjän korvan kohdalla ƒ Niveau de bruit à hauteur des

oreilles de l’opérateur ƒ Schallpegel am Bedienerohr ƒ ǼʌȓʌİįȠ șȠȡȪȕȠȣ ıİ ȜİȚĲȠȣȡȖȓĮ ƒ A kezelĘ fülénél mért zajszint ƒ Livello di potenza

sonora all’orecchio dell’operatore ƒ TrokšƼa lƯmenis pie operatora auss ƒ Dirbanþiojo su mašina patiriamo triukšmo lygis ƒ Livell tal-ƪoss fil-

Widna tal-Operatur ƒ Dopuszczalny poziom haáasu dla operatora ƒ Nível sonoro nos ouvidos do operador ƒ Nivelul zgomotului la urechea

operatorului ƒ Hladina hluku pôsobiaca na sluch operátora ƒ Raven hrupa pri ušesu upravljavca ƒ

Nivel sonoro en el oído del operador ƒ

udnivå vid förarens öra

87dB(A)Lwa (2006/42/EC)

Skupnosti Firma de la persona responsable de la declaración en nombre del fabricante que posee la documentación técnicay está autorizada

34 West Avenue

Harmonised standards used ƒ ɂɡɩɨɥɡɜɚɧɢ ɯɚɪɦɨɧɢɡɢɪɚɧɢ ɫɬɚɧɞɚɪɬɢ ƒ Použité harmonizované normy ƒ Brugte harmoniserede standarder ƒ

Gebruikte geharmoniseerde standaards ƒ Kasutatud ühtlustatud standardid ƒ Käytetyt yhdenmukaistetut standardit ƒ Normes harmonisées

utilisées ƒ Angewandte harmonisierte Normen ƒ ǼȞĮȡȝȠȞȚıȝȑȞĮ ʌȡȩĲȣʌĮ ʌȠȣ ȤȡȘıȚȝȠʌȠȚȒșȘțĮȞ ƒ Harmonizált szabványok ƒ Standard

armonizzati applicati ƒ Izmantotie saskaƼotie standarti ƒ Panaudoti suderinti standartai ƒ Standards armonizzati uĪati ƒ Normy spójne powiązane

ƒ Normas harmonizadas usadas ƒ Standardele armonizate utilizate ƒ Použité harmonizované normy ƒ Uporabljeni usklajeni standardi ƒ

Estándares armonizados utilizados ƒ Harmoniserade standarder som används

BSENISO12100Ͳ1

BSENISO13857

BSEN349

Technical standards and specifications used ƒ ɂɡɩɨɥɡɜɚɧɢ ɬɟɯɧɢɱɟɫɤɢ ɫɬɚɧɞɚɪɬɢ ɢ ɫɩɟɰɢɮɢɤɚɰɢɢ

ƒ Použité technické normy a specifikace ƒ

Brugte tekniske standarder og specifikationer ƒ Gebruikte technische standaards en specificaties ƒ Kasutatud tehnilised standardid ja

spetsifikatsioonid ƒ Käytetyt tekniset standardit ja eritelmät ƒ Spécifications et normes techniques utilisées ƒ Angewandte technische Normen

und Spezifikationen ƒ ȉİȤȞȚțȐ ʌȡȩĲȣʌĮ țĮȚ ʌȡȠįȚĮȖȡĮĳȑȢ ʌȠȣ ȤȡȘıȚȝȠʌȠȚȒșȘțĮȞ ƒ MĦszaki szabványok és specifikációk ƒ Standard tecnici e

specifiche applicati ƒ Izmantotie tehniskie standarti un specifikƗcijas ƒ Panaudoti techniniai standartai ir techninơ informacija ƒ Standards u

speƛifikazzjonijiet tekniƛi uĪati ƒ Normy i specyfikacje techniczne powiązane ƒ Normas técnicas e especificaç ões usadas ƒ Standardele tehnice

úi specificaĠiile utilizate ƒ Použité technické normy a špecifikácie ƒ Uporabljeni tehniþni standardi in specifikacije ƒ Estándares y especificaciones

técnicas utilizadas ƒ Tekniska standarder och specifikationer som används

BSENISO5349Ͳ1

BSENISO5349Ͳ2

The place and date of the declaration ƒ Ɇɹɫɬɨ

ɢ ɞɚɬɚ ɧɚ ɞɟɤɥɚɪɚɰɢɹɬɚ ƒ Místo a datum prohlášení ƒ Sted og dato for erkl æringen ƒ Plaats en

datum van de verklaring ƒ Deklaratsiooni väljastamise koht ja kuupäev ƒ Vakuutuksen paikka ja päivämäärä ƒ Lieu et date de la déclaration ƒ

Ort und Datum der Erklärung ƒ ȉȩʌȠȢ țĮȚ ȘȝİȡȠȝȘȞȓĮ įȒȜȦıȘȢ ƒ A nyilatkozat kelte (hely és idĘ) ƒ Luogo e data della dichiarazione ƒ

DeklarƗcijas vieta un datums ƒ Deklaracijos vieta ir data ƒ Il-post u d-data tad-dikjarazzjoni ƒ Miejsce i data wystawienia deklaracji ƒ Local e data

da declaração ƒ Locul úi data declaraĠiei ƒ Miesto a dátum vyhlásenia ƒ Kraj in datum izjave ƒ Lugar y fecha de la declaración ƒ Plats och datum

för deklarationen

Smithco West Inc.

200 West Poplar Avenue

Cameron, WI 54822 USA

24-Jun -09

Signature of the person empowered to draw up the declaration on behalf of the manufacturer, holds the technical documentation and is

authorised to compile the technical file, and who is established in the Community.ɉɨɞɩɢɫ ɧɚ ɱɨɜɟɤɚ, ɭɩɴɥɧɨɦɨɳɟɧ ɞɚ ɫɴɫɬɚɜɢ

ɞɟɤɥɚɪɚɰɢɹɬɚ ɨɬ ɢɦɟɬɨ ɧɚ ɩɪɨɢɡɜɨɞɢɬɟɥɹ, ɤɨɣɬɨ ɩɨɞɞɴɪɠɚɳɬɟɯɧɢɱɟɫɤɚɬɚ

ɞɨɤɭɦɟɧɬɚɰɢɹ ɢ ɟ ɨɬɨɪɢɡɢɪɚɧ ɞɚ ɢɡɝɨɬɜɢ ɬɟɯɧɢɱɟɫɤɢɹ ɮɚɣɥ

ɢ ɟ ɪɟɝɢɫɬɪɢɪɚɧ ɜ ɨɛɳɧɨɫɬɬɚ.Podpis osoby oprávnČné sestavit prohlášení jménem výrobce, držet technickou dokumentaci a osoby

oprávnČnésestavit technické soubory a založené v rámci Evropského spoleþenství.Underskrift af personen, der har fuldmagt til at udarbejde

erklæringen på vegne af producenten, der er indehaveraf dokumentationen og er bemyndiget til at udarbejde den tekniske journal, og som er

baseret i nærområdet.Handtekening van de persoon die bevoegd is de verklaring namens de fabrikant te tekenen, de technischedocumentatie

bewaart en bevoegd is om het technische bestand samen te stellen, en die is gevestigd in het Woongebied.Ühenduse registrisse kantud isiku

allkiri, kes on volitatud tootja nimel deklaratsiooni koostama, kes omab tehnilistdokumentatsiooni ja kellel on õigus koostada tehniline

toimik.Sen henkilön allekirjoitus, jolla on valmistajan valtuutus vakuutuksen laadintaan, jolla on hallussaan teknisetasiakirjat, joka on valtuutettu

laatimaan tekniset asiakirjat ja joka on sijoittautunut yhteisöön.Signature de la personne habilitée à rédiger la déclaration au nom du fabricant,

à détenir la documentationtechnique, à compiler les fichiers techniques et qui est implantée dans la Communauté.Unterschrift der Person, die

berechtigt ist, die Erklärung im Namen des Herstellers abzugeben, die dietechnischen Unterlagen aufbewahrt und berechtigt ist, die

technischen Unterlagen zusammenzustellen,und die in der Gemeinschaft niedergelassen ist.ȊʌȠȖȡĮĳȒ ĮĲȩȝȠȣ İȟȠȣıȚȠįȠĲȘȝȑȞȠȣ ȖȚĮ ĲȘȞ

ıȪȞĲĮȟȘ ĲȘȢ įȒȜȦıȘȢ İț ȝȑȡȠȣȢ ĲȠȣ țĮĲĮıțİȣĮıĲȒ, Ƞ ȠʌȠȓȠȢțĮĲȑȤİȚ ĲȘȞ ĲİȤȞȚțȒ ȑțșİıȘ țĮȚ ȑȤİȚ ĲȘȞ İȟȠȣıȚȠįȩĲȘıȘ ȞĮ ĲĮȟȚȞȠȝȒıİȚ ĲȠȞ ĲİȤȞȚțȩ

ĳȐțİȜȠ țĮȚ Ƞ ȠʌȠȓȠȢ İȓȞĮȚįȚȠȡȚıȝȑȞȠȢ ıĲȘȞ ȀȠȚȞȩĲȘĲĮ.A gy ártó nevében meghatalmazott személy, akinek jogában áll módosítania a

nyilatkozatot, a mĦszakidokumentációt Ęrzi, engedéllyel rendelkezik a mĦszaki fájl összeállításához, és aki a közösségbenletelepedett

személy.Firma della persona autorizzata a redigere la dichiarazione a nome del fabbricante, in possesso Delladocumentazione tecnica ed

autorizzata a costituire il fascicolo tecnico, che deve essere stabilita nella Comunità.T Ɨs personas paraksts, kura ir pilnvarota deklarƗcijas

sastƗdƯšanai ražotƗja vƗrdƗ, kurai ir tehniskƗdokumentƗcija, kura ir pilnvarota sagatavot tehnisko reƧistru un kura ir apstiprinƗta

KopienƗ.Asmuo, kuris yra gana žinomas, kuriam gamintojas suteikơ Ƴgaliojimus sudaryti šią deklaraciją, ir kuris jąpasirašơ, turi visą techninĊ

informaciją ir yra Ƴgaliotas sudaryti techninơs informacijos dokumentą.Il-firma tal-persuna awtorizzata li tfassal id-dikjarazzjoni f’isem il-

fabbrikant, gƫandha d-dokumentazzjoniteknika u hija awtorizzata li tikkompila l-fajl tekniku u li hija stabbilita fil-Komunit à.Podpis osoby

upowaĪnionej do sporządzenia deklaracji w imieniu producenta, przechowującej dokumentacjĊtechniczną, upowaĪnioną do stworzenia

dokumentacji technicznej oraz wyznaczonej ds. wspólnotowych.Assinatura da pessoa com poderes para emitir a declaração em nome do

fabricante, que possui a documentaçãotécnica, que está autorizada a compilar o processo técnico e que está estabelecida na

Comunidade.Semnătura persoanei împuternicite să elaboreze declaraĠia în numele producătorului, care deĠine documentaĠiatehnică, este

autorizată să compileze dosarul tehnic úi este stabilită în Comunitate.Podpis osoby poverenej vystavením vyhlásenia v mene výrobcu, ktorá

má technickú dokumentáciu a jeoprávnená spracovaĢ technické podklady a ktorá je umiestnená v Spoloþenstve.Podpis osebe, pooblašþene za

izdelavo izjave v imenu proizvajalca, ki ima tehniþno dokumentacijo in lahkosestavlja spis tehniþne dokumentacije, ter ima sedež v

Skupnosti.Firma de la persona responsable de la declaración en nombre del fabricante, que posee la documentación técnicay está autorizada

. ,

para recopilar el archivo técnico y que está establecido en la Comunidad.Undertecknas av den som bemyndigad att upprätta deklarationen å

tillverkarens vägnar, innehar den tekniskadokumentationen och är bemyndigad att sammanställa den tekniska informationen och som är

etablerad igemenskapen.

2006/42/ECAnnexII1A:2

TimLansdell

TechnicalDirector

19thMarch2009

RansomesJacobsen

LimitedWestRoad,RansomesEuropark,Ipswich,

England,IP39TT

2006/42/ECAnnexII1A:10

DawnBryngelson

TechnicalDocumentationAdvisor

SmithcoInc.

34 West Avenue

  

Wayne,PAUSA19087Ͳ3311

10ͲDecͲ09

Certificate Number ƒ ɇɨɦɟɪ ɧɚ ɫɟɪɬɢɮɢɤɚɬ ƒ ýíslo osvČdþení ƒ Certifikatnummer ƒ Certificaatnummer ƒ Sertifikaadi number ƒ

Hyväksyntänumero ƒ Numéro de certificat ƒ Bescheinigungsnummer ƒ ǹȡȚșȝȩȢ ȆȚıĲȠʌȠȚȘĲȚțȠȪ ƒ Hitelesítési szám ƒ Numero del certificato ƒ

SertifikƗta numurs ƒ Sertifikato numeris ƒ Numru taƛ-ƚertifikat ƒ Numer certyfikatu ƒ Número do Certificado ƒ Număr certificat ƒ ýíslo osvedþenia

tevilka certifikata ƒ Número de certificado ƒ Certifikatsnummer

420002010Ͳ1

The Smithco Commercial Products Two-Year Limited Warranty

Smithco, Inc. (Smithco) warrants your 2007 or newer Smithco Commercial Product (“Product”) purchased

after January 1, 2007, to be free from defects in materials or workmanship for the period of time listed below.

Where a warrantable condition exists, Smithco will repair the Product at no cost to you including diagnosis,

labor (at the Smithco standard labor rate, subject to the Smithco flat rate schedule), and parts.

Warranty Duration is:

(1) Two years, 1500 operational hours* from the date of delivery to the original purchaser or three years

from the date of original manufacturer of the product, whichever occurs first. (*Products equipped

with hour meter).

(2) Products used in rental situations are covered for 90 days from date of delivery to original user/

renter.

Owner Responsibilities:

As the Product owner, you are responsible for required maintenance and adjustments stated in your Owner’s Manual.

Failure to perform required maintenance and adjustments can be grounds for disallowing a warranty claim. You are

particularly responsible to train all present and future operators of this product on the safe operation of this

product at your location.

Instructions for Obtaining Warranty Service:

You are responsible for notifying the Authorized Smithco Products Distributor from whom you purchased the Product

as soon as you believe a warrantable condition exists and not later than 30 days from discovery of the condition.

If you need help locating an Authorized Smithco Distributor, or if you have questions regarding your warranty rights or

responsibilities, you may contact us at:

Smithco Product Support Department

200 W Poplar PO Box 487

Cameron, Wisconsin 54822

Telephone: 1-800-891-9435 E-Mail: [email protected]

Maintenance Parts:

Parts scheduled for replacement as required maintenance (“Maintenance Parts”), are warranted for the period of time

up to the scheduled replacement time for that part.

Items/Conditions Not Covered:

Not all product failures or malfunctions that occur during the warranty period are defects in materials or

workman-ship. The items/conditions listed below are not covered by this warranty:

Product failures which result from the use of non-Smithco replacement parts, or from installation and use of

add-on, modified, or unapproved accessories are not cov-ered.

Product failures which result from failure to perform required maintenance and/or adjustments are not cov-

ered.

Product failures that result from operating the Product in an abusive, negligent or reckless manner are not

covered.

This warranty does not apply to parts subject to con-sumption through use, unless found to be defective.

Examples of parts which are consumed, or used up, during normal Product operation include, but are not

limited to: blades, tines, teeth, scarifiers, rakes, plates, wear plates, castor wheels, tires, batteries, filters, belts,

nozzles, etc.

This warranty does not apply to failures caused by out-side influence. Items considered to be outside influ-

ence include, but are not limited to, weather, storage practices, contamination, use of unapproved coolants,

lubricants, additives, or chemicals, etc.

This warranty does not apply to normal “wear and tear” items. Normal “Wear and Tear” includes, but is not lim-

ited to, damage to seats due to wear or abrasion, worn painted surfaces, scratched decals or windows, etc.

Smithco may require the return of failed parts or components in order to determine the validity of any warranty

claim.

Smithco will not be obligated to replace components of other manufacturers if inspection by the original

component manufacturer indicates that failure was due to normal wear and tear, expected consumption

through use or improper care or service.

Other Legal Disclaimers:

The above remedy for product defects through repair or replacement by an authorized Smithco distributor or dealer is

the purchaser’s sole remedy for any defect. This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

THERE ARE NO OTHER EXPRESS WARRANTIES OTHER THAN THOSE SET FORTH ABOVE. ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE DURATION OF THE

LIMITED WARRANTIES CONTAINED HEREIN.

Some states may not allow limitations on how long an implied warranty lasts, so the above limitation may not

apply to you.

THE SMITHCO COMPANY IS NOT LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE USE OF THE PRODUCT, INCLUDING ANY COST OR EXPENSE OF PROVIDING A

SUBSTITUTE PRODUCT OR SERVICE DURING PERIODS OF MALFUNCTION OR NON-USE.

Some states may not allow the exclusion of indirect, incidental or consequential damages, so the above exclusion

may not apply to you.

Smithco neither assumes, nor authorizes any person to assume for it, any other liability in connection with

the sale or use of this product.

SMITHCO, INC.

Wayne, PA 19087

Smithco Super Star LE Instrucțiuni de utilizare

Marca: Smithco

Model: Super Star LE

Tip: Instrucțiuni de utilizare

Descărcați PDF

raport

în alte limbi

English: Smithco Super Star LE Operating instructions

Smithco Super Star LE Instrucțiuni de utilizare

Smithco Super Star LE Instrucțiuni de utilizare

în alte limbi

Lucrări conexe

Alte documente