Eizo S1703 Manual de utilizare

Marca: Eizo

Model: S1703

Categorie: Televizoare

Tip: Manual de utilizare

Acest manual este potrivit și pentru

S1903
S1933

Important

Please read PRECAUTIONS, this User’s Manual, and the Setup Guide

(separate volume) carefully to familiarize yourself with safe and effective

usage.

• Please refer to the Setup Guide for basic information ranging from

connection of the monitor to a PC to using the monitor.

• The latest User’s Manual is available for download from our web site:

http://www.eizoglobal.com

[Location of the Caution Statements]

S1703 (Ex.Tilt Stand)

S1903 / S1933 (Ex.Tilt Stand)

This product has been adjusted specically for use in the region to which it was originally shipped. If operated outside

this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior

arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been

made to ensure that this manual provides up-to-date information, please note that EIZO monitor specications are

subject to change without notice.

Kensington and MicroSaver are trademarks of ACCO Brands Corporation.

VESA is a registered trademark of Video Electronics Standards Association.

Windows, Windows Media, Windows Vista, SQL Server, and Xbox 360 are registered trademarks of Microsoft Corporation in the United

States and other countries.

Apple, ColorSync, eMac, iBook, iMac, iPad, Mac, MacBook, Macintosh, Mac OS, PowerBook, and QuickTime are registered trademarks

of Apple Inc.

ENERGY STAR is a registered trademark of the United States Environmental Protection Agency in the United States and other

countries.

EIZO, the EIZO Logo, ColorEdge, DuraVision, FlexScan, FORIS, RadiCS, RadiForce, RadiNET, Raptor, and ScreenManager are

registered trademarks of EIZO Corporation in Japan and other countries.

ColorNavigator, EcoView NET, EIZO EasyPIX, EIZO ScreenSlicer, i • Sound, Screen Administrator, and UniColor Pro are trademarks of

EIZO Corporation.

All other company and product names are trademarks or registered trademarks of their respective owners.

Notice for this monitor

This product is suited to general purposes like creating documents, viewing multimedia content.

This product has been adjusted specically for use in the region to which it was originally shipped. If the product is

used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable when the following are used:

· Power cords provided with the product

· Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more

after the monitor power has been turned on.

Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a

stable display.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may

appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to

“Cleaning” (page 5)).

The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on

the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.

The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker, please contact

your local EIZO representative.

Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference

patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure

marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt

to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may

occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until

the dew condensation disappears, otherwise it may cause some damage to the monitor.

Cleaning

Attention

• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or

panel, and also quality deterioration of the image.

• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.

NOTE

• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.

The stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water.

To use the monitor comfortably

• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the

environmental conditions.

• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

CONTENTS

Notice for this monitor .............................................. 4

CONTENTS ............................................................. 6

Chapter 1 Features and Overview ..................... 7

1-1 Features ............................................................... 7

1-2 Buttons and Indicators ....................................... 8

1-3 Functions and Basic Operation ....................... 10

Chapter 2 Settings and Adjustments .............. 12

2-1 Set a Sync-on-Green Signal ............................. 12

2-2 Setting Screen Resolution ................................ 12

Compatible Resolutions/Frequencies ............... 12

Setting Resolution ............................................... 13

2-3 Utility Disk .......................................................... 14

● Disk contents and software overview ................ 14

● To use ScreenManager Pro for LCD (DDC/CI)/

EIZO ScreenSlicer ............................................ 14

2-4 Screen Adjustment ............................................ 15

Digital Input .......................................................... 15

Analog Input ........................................................ 15

2-5 Color Adjustment .............................................. 18

●

To select the display mode (FineContrast mode)

... 18

● To

perform advanced adjustments .................... 18

● Ad

justment items in each mode ........................ 18

● To set/adjust color ............................................. 19

2-6 Turning off the monitor automatically

[Eco Timer] ..................................................... 20

2-7 Setting Adjustment Menu Position

[Menu Position] .............................................. 20

2-8 Setting Power Indicator ON/OFF

[Power Indicator] ........................................... 20

2-9

Displaying Monitor Information [Information]

... 20

2-10 Setting Language [Language] ........................ 21

2-11 Setting On/Off for the automatic brightness

adjustment function

[Auto EcoView] .............................................. 21

2-12 Displaying the level of power saving by

EcoView Index ................................................ 21

2-13 Locking Buttons .............................................. 21

● To lock adjustments/settings in the

Adjustment menu ............................................. 21

2-14

Enabling/Disabling DDC/CI communication

... 22

2-15 Setting EIZO logo display ON/OFF ................ 22

2-16 Resuming the Default Setting [Reset] ........... 22

● To reset color adjustment values ....................... 22

● To reset all adjustments to the factory

default settings ................................................. 22

Chapter 3 Connecting Cables .......................... 23

3-1 Connecting Multiple PCs to the Monitor ........ 23

● To switch the input signal .................................. 23

● To set input signal selection [Input Signal] ........ 23

Chapter 4 Troubleshooting ............................... 24

Chapter 5 Reference ......................................... 26

5-1 How to Attach the Optional Arm ...................... 26

5-2 Power Saving Mode .......................................... 27

5-3 Specications .................................................... 28

5-4 Glossary ............................................................. 36

5-5 Preset Timing ..................................................... 38

Appendix .................................................................. 39

FCC Declaration of Conformity .......................... 40

LIMITED WARRANTY .......................................... 41

Recycling Information ......................................... 42

Chapter 1 Features and Overview

Thank you very much for choosing an EIZO color LCD monitor.

1-1 Features

• Applicable to the resolution of 1280 × 1024

• Stereo speakers

• Power saving function

Suppressing the power consumption* reduces the carbon dioxide emissions.

This product is equipped with various power saving functions.

– Auto EcoView function

The sensor on the front side of the monitor detects the environmental brightness to

adjust the screen brightness automatically and comfortably.

Excessively high brightness may lead a damage to the natural environment as well

as to your eyes. Suppressing the excessively high brightness will be helpful to

reduce the power consumption and the damage to your eyes.

“2-11 Setting On/Off for the automatic brightness adjustment function

[Auto EcoView]” (page 21)

– EcoView Index function

This indicator shows the power saving ratio, power reduction and CO

reduction as

a result of the brightness

of the monitor. You can realize the power consumption reduction by taking

consideration in the ratio of power saving.

“2-12 Displaying the level of power saving by EcoView Index” (page 21)

• FineContrast function to allow the best mode for screen display

– Features Paper mode showing a view when printed onto paper

“● To select the display mode (FineContrast mode)” (page 18)

• Supports portrait and landscape formats (For height adjustable stand)

• The software “ScreenManager Pro for LCD (DDC/CI)” to adjust the screen

using the mouse and keyboard is included

“2-3 Utility Disk” (page 14)

Note

• When using the monitor screen in

a portrait position, the graphics

board supporting portrait display is

required. When placing the monitor

in a portrait position, the settings

of your graphics board need to be

changed. Refer to the User’s Manual

of the graphics board for details.

* Reference values:

-S1703

Maximum power consumption:

25W (Luminance Max., at default

settings)

Standard power consumption: 9W

(Luminance 120cd/m

, at default

settings)

-S1903

Maximum power consumption:

23W (Luminance Max., at default

settings)

Standard power consumption: 11W

(Luminance 120cd/m

, at default

settings)

-S1933

Maximum power consumption:

24W (Luminance Max., at default

settings)

Standard power consumption: 12W

(Luminance 120cd/m

, at default

settings)

Chapter 1 Features and Overview

1-2 Buttons and Indicators

Front

Adjustment menu (ScreenManager*

)

1 87654321 8765432

Tilt Stand Height adjustable Stand

Adjustment menu (ScreenManager*

)

1 Sensor The sensor detects ambient brightness. Auto EcoView function (page 21)

2 EcoView button Displays the setting menu of Auto EcoView and EcoView Index (page 21).

3 Volume control button Displays the volume adjustment menu (page 10).

Input Signal Selection button

Switches input signals for display.

5 Control buttons (Left, Right) • Displays the brightness adjustment window (page 10).

• Chooses an adjustment item or increases/decreases adjusted values for

advanced adjustments using the Adjustment menu (page 11).

6 Enter button Displays the Adjustment menu, determines an item on the menu screen, and

saves values adjusted.

7 Power button Turns the power on or off.

8 Power indicator Indicates monitor’s operation status.

Blue: Operating Orange: Power saving Off: Power off

ScreenManager is an EIZO’s nickname of the Adjustment menu. See “Basic operation of Adjustment menu” (page 11) for how to use.

Chapter 1 Features and Overview

Rear

1211 13

Tilt Stand Height adjustable Stand

9 Security lock slot Complies with Kensington’s MicroSaver security system.

Stand

Tilt Stand : Used to adjust the angle (tilt) of the monitor screen.

Height adjustable Stand

: Adjusts the height and angle (tilt and swivel) of the monitor.

Power connector

Connects the power cord.

Input signal connectors

Left: DVI-D connector/Right: D-Sub mini 15-pin connector

13 Stereo mini jack Connects the stereo mini jack cable.

Cable holder

Covers the monitor cables.

Speaker

Outputs audio source.

Headphone jack

Connects the headphones.

An optional arm (or an optional stand) can be attached by removing the stand section. (Refer to “5-1 How to Attach the Optional Arm” (page 26))

Chapter 1 Features and Overview

1-3 Functions and Basic Operation

To adjust the screen and color

• The Adjustment menu and the EcoView menu

cannot be displayed at the same time.

●

Setting On/Off for the automatic brightness

adjustment function

[Auto EcoView] ………………………… see page 21

1 Press

2 Change “On” and “Off” with

●

Displaying the level of power saving by EcoView

Index …………………………………… see page 21

Press to display the level of power saving mode.

EcoView menu

Color Adjustment

●

To select the display mode (FineContrast mode)

……………………………………… see page 18

●

“Brightness,” “Contrast,” “Temperature,” and

“Gain” can be set for each mode (Custom/

EyeCare/Paper/Text/sRGB (S1703/S1903),

Custom/EyeCare/Paper/sRGB/DICOM (S1933)).

Settable functions vary with the display mode.

Resumption of Default Setting

●

To reset color adjustment values

[Reset] ……………………………… see page 22

Main menu (Refer to page 11 for operation)

Screen Adjustment

(Automatic Adjustment)

●

To adjust flickering and position

[Screen] …………………………… see page 15

●

To adjust color gradation automatically

[Range] …………………………… see page 17

(for analog signal input only)

Screen Adjustment

(Advanced Adjustment)

[Adjustment menu]

[At analog signal input] [At digital signal input]

●

To eliminate vertical bars [Clock*] … see page 16

●

To remove flickering or blurring

[Phase*] ……………………………… see page 16

●

To correct screen position

[Hor. Position*] ……………………… see page 17

[Ver. Position*] ……………………… see page 17

●

To modify blurred characters/lines

[Smoothing] ………………………… see page 17

Items marked with * can be adjusted with analog

input.

Brightness Adjustment

Press or to adjust brightness.

Volume Adjustment

Press .

Press or to adjust volume.

page 15

page 16

page 18

Chapter 1 Features and Overview

To make useful settings/adjustments

Setting Input Signal Selection

●

To set input signal selection

[Input Signal] ……………………… see page 23

Enabling / Disabling Auto Power-OFF

●

Turning off the monitor automatically

[Eco Timer] ………………………… see page 20

Setting Adjustment Menu Position

●

Setting Adjustment Menu Position

[Menu Position] …………………… see page 20

Power Indicator Setting

●

Setting Power Indicator ON/OFF

[Power Indicator] …………………… see page 20

Resumption of Default Setting

●

To reset all adjustments to the factory default

settings [Reset] …………………… see page 22

Basic operation of Adjustment menu

[Displaying Adjustment menu and selecting function]

(1) Press

. The main menu appears.

(2) Select a function with

or , and press . The sub menu appears.

(3) Select a function with or , and press . The adjustment/setting menu appears.

(4) Adjust the selected item with or , and press . The setting is saved.

[Exiting Adjustment menu]

(1) Choose <Return> from the sub menu and press .

(2) Choose <Exit> from the main menu and press .

NOTE

• The Adjustment menu can also be exited by pressing twice quickly.

●

Set a Sync-on-Green Signal [SoG]

…………………………………… see page 12

●

Locking Buttons [Adjustment Lock]

…………………………………… see page 21

●

Enabling/Disabling DDC/CI communication

[DDC/CI] ………………………… see page 22

●

Setting EIZO logo display ON/OFF

…………………………………… see page 22

Adjustment menu (Refer to below for operation)

Language

●

Setting Language [Language]

page 21

Information

●

Displaying monitor information [Information]

page 20

Chapter 2 Settings and Adjustments

2-1 Set a Sync-on-Green Signal

When inputting a sync-on-green signal, the [SoG] setting for the monitor must be changed in advance according to the

procedure below (for analog signal).

(1) Press

to turn off the monitor.

(2) Press

holding down to turn on the monitor.

(3) Select “On” with or , and press .

2-2 Setting Screen Resolution

Compatible Resolutions/Frequencies

The monitor supports the following resolutions.

Analog Input

Resolution Frequency

Dot Clock

640 × 480 (VGA, VESA)

~75 Hz

135 MHz (Max.)

720 × 400 (VGA TEXT)

70 Hz

800 × 600 (VESA)

~75 Hz

1024 × 768 (VESA)

~75 Hz

1152 × 864 (VESA)

75 Hz

1280 × 960 (VESA)

60 Hz

1280 × 1024 (VESA)

~75 Hz

Digital Input

Resolution Frequency

Dot Clock

640 × 480 (VGA)

60 Hz

108 MHz (Max.)

720 × 400 (VGA TEXT)

70 Hz

800 × 600 (VESA)

60 Hz

1024 × 768 (VESA)

60 Hz

1280 × 1024 (VESA)

60 Hz

* Recommended resolution (Set this resolution)

Chapter 2 Settings and Adjustments

Setting Resolution

When you connect the monitor to the PC and nd that the resolution is improper, or when you want to change the

resolution, follow the procedure below.

●

Windows 8 / Windows 7

1. For Windows 8, click the “Desktop” tile on the Start Screen to display the desktop.

2. Right-click the mouse anywhere on the desktop except for icons.

3. From the displayed menu, click “Screen resolution”.

4. On the “Screen Resolution” dialog box, select the monitor.

5. Click “Resolution” to select the desired resolution.

6. Click the “OK” button.

7. When a conrmation dialog box is displayed, click “Keep changes”.

●

Windows Vista

1. Right-click the mouse anywhere on the desktop except for icons.

2. From the displayed menu, click “Personalize”.

3. On the “Personalization” window, click “Display Settings”.

4. On the “Display Settings” dialog box, select the “Monitor” tab and select desired resolution in the

“Resolution” eld.

5. Click the “OK” button.

6. When a conrmation dialog box is displayed, click “Yes”.

●

Windows XP

1. Right-click the mouse anywhere on the desktop except for icons.

2. From the displayed menu, click “Properties”.

3. When the “Display Properties” dialog box is displayed, click the “Settings” tab and select desired

resolution for “Screen resolution” under “Display”.

4. Click the “OK” button to close the dialog box.

●

Mac OS X

1. Select “System Preferences” from the Apple menu.

2. When the “System Preferences” dialog box is displayed, click “Displays” for “Hardware”.

3. On the displayed dialog box, select the “Display” tab and select desired resolution in the “Resolutions”

eld.

4. Your selection will be reected immediately. When you are satised with the selected resolution, close

the window.

Chapter 2 Settings and Adjustments

2-3 Utility Disk

An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and

the overview of the application software programs.

●

Disk contents and software overview

The disk includes software programs for adjustment, and User’s Manual. Refer to “Readme.txt” le on the disk for

software startup procedures or le access procedures.

Item Overview Windows Macintosh

Screen adjustment pattern les Used when adjusting the image of analog signal

input manually.

√ √

ScreenManager Pro for LCD

(DDC/CI)

Software for adjusting the screen using the mouse

and keyboard.

√ -

EIZO ScreenSlicer Software that divides a screen and lays out

multiple windows efciently.

√ -

User’s Manual of this monitor (PDF le)

√ √

Readme.txt le

√ √

●

To use ScreenManager Pro for LCD (DDC/CI)/EIZO ScreenSlicer

For the installation and use of ScreenManager Pro for LCD (DDC/CI)/EIZO SceenSlicer, refer to the respective User’s

Manual on the disc.

Chapter 2 Settings and Adjustments

2-4 Screen Adjustment

Digital Input

When digital signals are input, images are displayed correctly based on the

preset data of the monitor, but if characters and/or lines appear blurred, go to

step 6 “● To modify blurred characters/lines [Smoothing]” (page 17). When

performing more advanced adjustment, see “2-5 Color Adjustment” (page 18) and

subsequent pages.

Analog Input

The monitor screen adjustment is used to suppress ickering of the screen or

adjust screen position and screen size correctly according to the PC to be used.

To use the monitor comfortably, adjust the screen when the monitor is set up for

the rst time or when the settings of the PC in use are updated.

The Self Adjust function works when all of the following conditions are

satised.

• Whenasignalisinputintothemonitorforthersttimeorwhenthe

resolution or Vertical/Horizontal Frequency not displayed before is

set

• When signals with the vertical resolution over 480 are input

If the screen is not displayed correctly even after performing the Self Adjust

operation, adjust the screen according to the procedures on the following pages

to use the monitor comfortably.

[Adjustment Procedure]

Perform the auto adjustment.

● To adjust ickering, screen position, and screen size

automatically [Screen]

(1) Choose <Screen> from the <Auto Adjustment> menu, and press

The <Auto Adjustment> menu appears.

(2) Select “Execute” with

or , and press .

Flickering, screen position, and screen size are corrected by the auto-

adjustment function.

If the screen is not displayed correctly even after adjusting in

step 1 above, perform the adjustments according to the

proceduresonthefollowingpages.Whenthescreenis

displayed correctly, go to step 5 “● To adjust color gradation

automatically [Range]” (page 17).

Prepare the display pattern for the analog display adjustment.

Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen

adjustment pattern les”.

Attention

• Wait 30 minutes or more from

monitor power on before starting

adjustments. (Allow the monitor

to warm up for at least 30 minutes

before making adjustments.)

•

The self adjustment (or automatic

screen adjustment) function works

correctly when an image is fully

displayed over the Windows or

Macintosh display area. They do not

work properly in the cases below:

- When an image is displayed only

on a part of the screen (command

prompt window, for example)

- When a black background

(wallpaper, etc.) is in use

Also, these functions cannot work

properly in some graphic boards.

NOTE

• For details and instructions on opening

the “Screen adjustment pattern les”,

refer to the “Readme.txt” le.

Chapter 2 Settings and Adjustments

Perform the auto adjustment again with the analog screen

adjustment pattern displayed.

● To adjust ickering, screen position, and screen size

automatically [Screen]

(1) Display Pattern 1 of the “Screen adjustment pattern les” in full

screen on the monitor.

(2) Choose <Screen> from the <Auto Adjustment> menu, and press

The <Auto Adjustment> menu appears.

(3) Select “Execute” with or , and press .

Flickering, screen position, and screen size are corrected by the auto-

adjustment function.

If the screen is not displayed correctly even after adjusting in

step 3 above, perform the adjustments according to the

proceduresonthefollowingpages.Whenthescreenis

displayed correctly, go to step 5 “● To adjust color gradation

automatically [Range]” (page 17).

Perform advanced adjustments for the following using the

<Screen> menu of the Adjustment menu.

Adjust the clock, phase and position, in this order.

● To eliminate vertical bars [Clock]

(1) Choose <Clock> from the <Screen> menu, and press

The <Clock> menu appears.

(2) Adjust the clock with or , and press .

The adjustment is completed.

● To remove ickering or blurring [Phase]

Adjustable range: 0 to 63

(1) Choose <Phase> from the <Screen> menu, and press

The <Phase> menu appears.

(2) Adjust the phase with or , and press .

The adjustment is completed.

NOTE

• Press the control button slowly so as

not to miss the adjustment point.

• When blurring, ickering or bars

appear on the screen after adjustment,

proceed to “● To remove ickering or

blurring [Phase]” (page 16) to remove

ickering or blurring.

Attention

• Flickering or blurring may not be

eliminated depending on your PC or

graphics board.

NOTE

• When vertical bars appear on the

screen after adjustment, go back to

“● To eliminate vertical bars [Clock]”

(page 16). (Clock → Phase → Position)

Chapter 2 Settings and Adjustments

● To correct screen position [Hor. Position], [Ver. Position]

(1) Choose <Hor. Position> and or <Ver. Position> from the <Screen>

menu, and press

The <Hor. Position> or <Ver. Position> menu appears.

(2) Adjust the position with or to display the image properly

in the display area of the monitor.

The adjustment is completed.

Adjust the color gradation.

● To adjust color gradation automatically [Range]

Every color gradation (0 to 255) can be displayed by adjusting the

signal output level.

(1) Display Pattern 2 in full screen on the monitor using the “Screen

adjustment pattern les”.

(2) Choose <Range> from the <Auto Adjustment> menu, and press

(3) Select “Execute” with

or , and press .

The output range is adjusted automatically.

(4) Close the Pattern 2.

Modify blurred characters or lines.

● To modify blurred characters/lines [Smoothing]

When a image is displayed with a resolution other than the

recommendation, the characters or lines of the displayed image may

be blurred.

Adjustable range: 1 to 5

(1) Choose <Smoothing> from the <Screen> menu, and press

The <Smoothing> menu appears.

(2) Adjust the characters/lines with or , and press .

The adjustment is completed.

NOTE

• Since the number of pixels and the

pixel positions are xed on the LCD

monitor, only one position is provided

to display images correctly. The

position adjustment is made to shiftn

an image to the correct position.

Chapter 2 Settings and Adjustments

2-5 Color Adjustment

●

To select the display mode (FineContrast mode)

This function allows you to select the best display mode for monitor brightness,

etc.

FineContrast mode

Mode Purpose

Custom Available for making desired setting.

EyeCare

Allows the brightness to be set lower than possible with

other modes.

Paper

Produces a printed paper effect. Suitable for displaying

images from media such as books and documents.

Text (S1703/S1903)

Suitable for displaying texts for word processing or

spreadsheets.

sRGB

Suitable for color matching with sRGB compatible

peripherals.

DICOM (S1933) Selected for the display in the DICOM mode.

(1) Choose <Color> from the Adjustment menu, and press .

(2) Choose <Color Mode> from the <Color> menu, and press .

The <Color Mode> menu appears.

(3) Select the mode with or , and press .

The setting completes.

●

perform advanced adjustments

Independent setting and saving of color adjustment are available for each

FineContrast mode.

●

justment items in each mode

According to the FineContrast mode selected, the adjustable function differs.

√

: Adjustment available −: Invalid for adjustment

Icon Function

FineContrast mode

Custom EyeCare

Paper

Text

(S1703/

S1903)

sRGB

DICOM

(S1933)

Brightness

√ √

√ √ √ −

Contrast

√

− − √ − −

Temperature

√ √

− √ − −

Gain

√ √

− − − −

Reset

√ √

√ √ √ −

NOTE

• “ScreenManager Pro for LCD

(DDC/CI)” allows you to select the

FineContrast mode automatically

according to the application used.

(Refer to “Chapter 3 Auto

FineContrast” on the User’s Manual

for “ScreenManager Pro for LCD

(DDC/CI)”.)

Attention

• Wait 30 minutes or more from

monitor power on before starting

adjustments.

• Perform the range adjustment rst

when adjusting color for analog input

signals.

(Refer to “● To adjust color gradation

automatically [Range]” (page 17).)

• The same image may be seen in

different colors on multiple monitors

due to their monitor-specic

characteristics. Make ne color

adjustment visually when matching

colors on multiple monitors.

Chapter 2 Settings and Adjustments

Menu Description Adjustment range

Brightness

To adjust the full screen

brightness as desired

0 to 100%

NOTE

• Values shown in percentage are available only as reference.

• You can also adjust the brightness by pressing

button while the adjustment menu is not displayed. Press

after adjustment.

• If you feel that the image is too dark even if the brightness is

set to 100%, adjust the contrast.

Contrast

To adjust the contrast of the

image

0 to 100%

NOTE

• Values shown in percentage are available only as reference.

• In the contrast of 50%, every color gradation is displayed.

• When adjusting the monitor, it is recommended to perform

the brightness adjustment which may not lose the gradation

characteristics, prior to the contrast adjustment.

• Perform the contrast adjustment in the following cases.

– When you feel the image is too dark even if the brightness

is set to 100% (Set the contrast to higher than 50%.)

Temperature

To select a color

temperature

Off, 5000K, 6500K, 9300K

NOTE

• Setting the value to “Off” presents the natural color of the

panel.

• The values shown in the Kelvin (K) are available only as

reference.

Gain

To adjust red, green, and

blue to a desired color tone

respectively

0 to 100%

Adjust the respective brightness of

red/green/blue to make a desired

color tone. Display an image with

white or gray background for

adjustment.

Attention

• This function does not enable to display every color gradation.

NOTE

• Values shown in percentage are available only as reference.

• When using the <Gain> setting, the <Temperature> setting is

set to “Off”.

• The gain value may change depending on the value of the

color temperature.

Reset

To reset the color settings of the selected FineContrast mode to

the default settings

●

To set/adjust color

(1) Choose <Color> from the Adjustment menu, and press .

(2) Select a desired function from the <Color> menu, and press .

The selected function menu appears.

(3) Adjust the selected item with or , and press .

The adjustment is completed.

NOTE

• Using the “ScreenManager Pro

for LCD (DDC/CI)” allows you to

perform the color adjustment by using

the mouse and keyboard of your PC.

The adjusted status can be registered

as a color data and restore the data

later. (Refer to “Chapter 4 Color

Adjustment” on the User’s Manual

for “ScreenManager Pro for LCD

(DDC/CI)”.)

Chapter 2 Settings and Adjustments

2-6 Turning off the monitor automatically

[Eco Timer]

This function allows you to specify whether to turn on / off the monitor

automatically after a specied time has elapsed in the power saving mode.

Adjustable range: Disable, Enable (0, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 min,

1-5h)

(1) Choose <Others> from the Adjustment menu, and press

(2) Choose <Eco Timer> from the <Others> menu, and press .

The <Eco Timer> menu appears.

(3) Select “Enable” or “Disable” with or .

When selecting “Enable”, set a monitor Off time with or .

(4) Press .

The setting is completed.

2-7 Setting Adjustment Menu Position

[Menu Position]

Adjust the menu position using the following procedure.

(1) Choose <Others> from the Adjustment menu, and press

(2) Choose <Menu Position> from the <Others> menu, and press .

The <Menu Position> menu appears.

(3) Select a menu position with or , and press .

The setting is completed.

2-8 Setting Power Indicator ON/OFF

[Power Indicator]

This function allows you to set the power indicator (blue) ON/OFF in the

monitor ON condition.

(1) Choose <Others> from the Adjustment menu, and press

(2) Choose <Power Indicator> from the <Others> menu, and press .

The <Power Indicator> menu appears.

(3) Select “Enable” or “Disable” with or , and press .

The setting is completed.

2-9 Displaying Monitor Information

[Information]

This function allows you to display the input signal status, current resolution

and model name.

Information 1/3 : Input signal status, resolution and H/V frequency

Information 2/3 : Enable/Disable setting for DDC/CI, On/Off setting for

SoG (Sync-on-Green)

Information 3/3 : Model name, serial number and usage time

(1) Choose <Information> from the Adjustment menu, and press

The <Information> menu appears.

(2) Then, press

to check settings, etc.

NOTE

• The usage time is not always “0”

when you purchase the monitor due

to factory inspection.

Pagina se încarcă ...

Eizo S1703 Manual de utilizare

Marca: Eizo

Model: S1703

Categorie: Televizoare

Tip: Manual de utilizare

Acest manual este potrivit și pentru

S1903
S1933

Descărcați PDF

raport

în alte limbi

English: Eizo S1703 User manual

Eizo S1703 Manual de utilizare

Acest manual este potrivit și pentru

Eizo S1703 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente