Important
Please read PRECAUTIONS, this User’s Manual, and the Setup Guide
(separate volume) carefully to familiarize yourself with safe and
eective usage.
• Please refer to the Setup Guide for basic information ranging from
connection of the monitor to a PC to using the monitor.
• For the latest product information including the User’s Manual, refer
to our web site :
www.eizoglobal.com
Color LCD Monitor
User’s Manual
2
Location of Caution Statement
サービスマン以外の方は裏ぶたをあけないでくだ
さい。内部には高電圧部分が数多くあり、万一さ
わると危険です。
警告：高圧注意
This product has been adjusted specically for use in the region to which it was originally shipped. If
operated outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless
prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every
eort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.
3
Notice for this monitor
Notice for this monitor
This product is suited to general purposes like creating documents, viewing multimedia content (Assuming
usage of approximately 12 hours per day).
If using this product for the following kinds of applications, where an extremely high degree of reliability and
safety is required, then measures should be in place to maintain safety while using this product.
• Transportation equipment (ships, aircraft, trains, and automobiles)
• Safety devices (Disaster prevention systems, security control systems, etc.)
• Life-critical devices (medical devices, such as life-support devices and operating room devices)
• Nuclear energy control devices (Nuclear energy control systems, security control systems of nuclear facilities, etc.)
• Major system communication devices (operation control systems of transportation systems, air trac control systems,
etc.)
This product has been adjusted specically for use in the region to which it was originally shipped. If the
product is used outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable when the following are used:
• Power cords provided with the product
• Signal cables specied by us
Only use optional products manufactured or specied by us with this product.
If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand due to
the composition of the rubber. Check the desk surface before use.
It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after the monitor power has been turned on, and then adjust the monitor.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and
maintain a stable display.
When the screen image is changed after displaying the same image for extended periods of time, an
afterimage may appear. Use the screen saver or power save function to avoid displaying the same image for
extended periods of time.
If the monitor displays continuously over a long period of time, dark smudges or burn-in may appear. To
maximize the life of the monitor, we recommend the monitor be turned o periodically.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer
to “Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may
appear on the LCD panel, this is not a malfunction. Percentage of eective dots: 99.9994 % or higher.
The backlight of the LCD panel has a xed lifetime. Depending on the usage pattern, such as usage for
long continuous periods, the lifespan of the backlight may run out sooner, requiring replacement. When the
screen becomes dark or begins to icker, please contact your local EIZO representative.
4
Notice for this monitor
Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such
as interference patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage
your panel. (If the pressure marks remain on the panel, leave the monitor with a black or white screen. The
symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do
not attempt to brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew
condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the
monitor on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to
the monitor.
Cleaning
Attention
• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet
or panel, and also quality deterioration of the image.
• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.
Note
• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.
The stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water.
To use the monitor comfortably
• An excessively dark or bright screen may aect your eyes. Adjust the brightness of the monitor
according to the environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
5
CONTENTS
CONTENTS
Notice for this monitor ......................................... 3
Cleaning .................................................................... 4
To use the monitor comfortably ............................. 4
CONTENTS ............................................................. 5
Chapter 1 Introduction ....................................... 6
1-1. Controls and Functions ............................... 6
●
Front ................................................................ 6
●
Rear ................................................................. 7
1-2. Supported Resolutions ................................ 7
1-3. Setting the Resolution ................................. 8
●
Windows 10 ..................................................... 8
●
Windows 8.1 / Windows 7 ............................... 8
●
Mac OS X 10.8 and later ................................. 8
●
Mac OS X 10.7 ................................................ 8
Chapter 2 Basic Adjustment/Setting ................ 9
2-1. Switch Operation Method ............................ 9
2-2. Switching Input Signals ............................... 9
2-3.
Switching Display Modes (Color Modes)
...10
●
Display Modes ................................................10
2-4. Conserving Energy ......................................10
2-5. Adjusting Brightness ..................................12
2-6. Adjusting Volume.........................................12
Chapter 3 Advanced Adjustment/Setting ...... 13
3-1. Basic Operation of the Setting menu ........13
3-2. Setting Menu Functions ..............................14
●
Color Adjustment ............................................14
●
Signal Settings ...............................................17
●
Preference Settings .......................................19
●
Language ...................................................... 20
●
Information .................................................... 20
Chapter 4 Administrator Settings ................... 21
4-1. Basic Operation of the “Administrator
Settings” Menu .............................................21
4-2. Functions of the “Administrator
Settings” Menu ............................................ 22
Chapter 5 Troubleshooting .............................. 23
5-1. No Picture .................................................... 23
5-2. Imaging Problems (For Both Digital and
Analog) ......................................................... 24
5-3. Imaging Problems (For Analog Only) ....... 25
5-4. Other Problems ........................................... 26
Chapter 6 Reference ........................................ 27
6-1. Attaching the Optional Arm ....................... 27
6-2. Connecting Multiple PCs ........................... 29
6-3. Specications ............................................. 30
●
Outside Dimensions .......................................31
●
Main Default Settings .................................... 32
●
Accessories ................................................... 32
Chapter 7 Glossary .......................................... 33
Appendix .............................................................. 35
Trademark ............................................................... 35
License ................................................................... 36
ENERGY STAR ........................................................ 36
FCC Declaration of Conformity .............................37
LIMITED WARRANTY ............................................. 38
Recycling Information ........................................... 39
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Controls and Functions
●
Front
Setting menu *1
1 432
Tilt Stand
Height adjustable Stand
1. Ambient light sensor Detects ambient brightness (Auto EcoView function (page 11)).
2. Operation switches Displays menus. Operate the switches according to the operation guide.
3. Power switch Turns the power on or o.
4. Power indicator Indicates the monitor’s operation status.
White: Screen display
Orange: Power saving mode
OFF: Power o
*1 For details on usage, see “3-1. Basic Operation of the Setting menu” (page 13).
6
Chapter 1 Introduction
●
Rear
Height adjustable StandTilt Stand
12
5
11
12
6
11
98
7
7
5
10
6
6
6
5. Security lock slot Complies with Kensington’s MicroSaver security system.
6. Speakers Outputs audio.
7. Stand
*2
Tilt Stand: Used to adjust the angle (tilt) of the monitor screen.
Height adjustable Stand: Adjusts the height and angle (tilt and swivel) of the
monitor.
8. Power connector Connects the power cord.
9. Input signal connectors The following connectors are available on the monitor rear in order of left to
right.
DisplayPort connector
DVI-D connector
D-Sub mini 15-pin connector
10. Stereo mini jack Connects to a stereo mini jack cable.
11. Headphone jack Connects to headphones.
12. Cable holder Holds the monitor cables.
*2 An optional arm (or optional stand) can be attached by removing the stand section (see “6-1. Attaching the
Optional Arm” (page 27)).
1-2. Supported Resolutions
The monitor supports the following resolutions.
Resolution Vertical Scan Frequency
640 × 480 60 Hz
720 × 480 60 Hz
800 × 600 60 Hz
1024 × 768 60 Hz
1280 × 720 60 Hz
1280 × 800 60 Hz
1280 × 1024
*1
60 Hz
*1 Recommended resolution
7
Chapter 1 Introduction
1-3. Setting the Resolution
If the resolution is incorrect after connecting the monitor to a PC or if you want to change the resolution,
follow the procedure below.
●
Windows 10
1. Right-click the mouse anywhere on the desktop except on icons.
2. From the displayed menu, click “Display Settings”.
3. On the "Customize your display" dialog box, click "Advanced display settings".
4. Select a monitor, then choose a resolution from the "Resolution" pull-down menu.
5. Click the "Apply" button.
6. When a conrmation dialog box is displayed, click “Keep changes”.
●
Windows 8.1 / Windows 7
1. For Windows 8.1, click the "Desktop" tile on the Start Screen to display the desktop.
2. Right-click the mouse anywhere on the desktop except on icons.
3. From the displayed menu, click “Screen resolution”.
4. Select a monitor, then choose a resolution from the "Resolution" pull-down menu.
5. Click the "OK" button.
6. When a conrmation dialog box is displayed, click “Keep changes”.
●
Mac OS X 10.8 and later
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog box is displayed, click “Displays”. (For Mac OS X 10.8,
click "Displays" for "Hardware".)
3. On the displayed dialog box, select the “Display” tab, then choose "Change" for “Resolutions”.
4. The list of selectable resolutions is displayed. Select the desired resolution. If the desired
resolution is not displayed in the list, hold down the Option key and select "Change".
5. Your selection will be reected immediately. When you are satised with the selected resolution,
close the window.
●
Mac OS X 10.7
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog box is displayed, click “Displays” for “Hardware”.
3. On the displayed dialog box, select the “Display” tab and select the desired resolution in the
“Resolutions” eld.
4. Your selection will be reected immediately. If you are satised with the selected resolution, close
the window.
8
Chapter 1 Introduction
Chapter 2 Basic Adjustment/Setting
This monitor enables users to change the brightness according to personal preference or to suit the usage
environment and reduce power consumption to conserve energy.
This chapter describes the basic functions that can be adjusted and set using the switches on the front of the
monitor.
For advanced adjustment and setting procedures using the Setting menu, see “Chapter 3 Advanced
Adjustment/Setting” (page 13).
2-1. Switch Operation Method
1.
Displaying the operation guide
1. Press any switch (except ).
The operation guide appears on the screen.
2.
Adjusting/setting
1. Press a switch for adjustment/setting.
The Adjustment/Setting menu appears.
(A submenu may also be displayed. In this case, select the item for adjustment/setting using
and
select
.)
2. Perform adjustment/setting with the switches and select to accept the changes.
3.
Exiting
1. Select to exit the menu.
2. When no menu is displayed, the operation guide will automatically disappear after a few seconds
if no switches are operated.
2-2. Switching Input Signals
When a monitor has multiple signal inputs, the signal to display on-screen can be changed.
9
Chapter 2 Basic Adjustment/Setting
2-3. Switching Display Modes (Color Modes)
This product is preinstalled with color modes for various display purposes.
Switch the mode according to the purpose and content for display. This allows the monitor to display
images in a manner appropriate to the display content.
●
Display Modes
Color Mode Purpose
User1
User2
Select either of these modes to set a user-dened display mode.
sRGB
This mode is suitable for matching color reproduction with peripheral devices that
support sRGB, such as when printing photos taken using a digital camera.
Paper
This mode uses color tones and contrast similar to that of paper to produce a printed
paper eect. It is suitable for displaying images from media such as books and
documents.
DICOM
Selected for the display in the DICOM mode.
2-4. Conserving Energy
This monitor is equipped with EcoView functions to enable users to conserve energy.
Use this function to curtail unnecessary power consumption and save on electricity expenses. Saving
power also reduces carbon dioxide emissions.
Note
• The power saving level (Power Reduction, CO
2
Reduction, and Eco Performance Level) can be checked on the
“EcoView Settings” menu. The more indicators that light up representing the Eco Performance Level, the higher
the power saving level attained.
- Power Reduction: the reduction in the backlight’s power consumption as a result of the adjusted brightness
value.
- CO
2
Reduction: converted from the “Power Reduction” value, this is an estimate of the quantity of CO
2
emissions reduced when using the monitor for 1 hour.
• The numeric value is a result of calculation based on a default setting (0.000555t-CO2/kWh) determined by a
Japanese ministerial ordinance (2006, Ministry of Economy, Trade and Industry, Ministry of Environment, civil
code article 3) and may dier depending on country and year.
10
Chapter 2 Basic Adjustment/Setting
Function Description
Auto EcoView
The ambient light sensor on the front of the monitor detects the
ambient brightness to automatically adjust the screen brightness
to a comfortable level using the Auto EcoView function. The
power consumption of the backlight can be curtailed by adjusting
the brightness to an appropriate level.
This function can also mitigate eye strain and tiredness caused
by a screen that is too bright or too dark.
Use the “Advanced Settings” to set the automatic adjustment
range to suit the monitor’s usage environment or personal
preference.
Setting Range: On, O
Note
• Be careful not to block the ambient light sensor on the lower
side of the monitor when using the Auto EcoView function.
• Even when the Auto EcoView setting is “On”, the
operation switch on the front of the monitor or color
adjustment can be used to change the “Brightness” to suit
your personal preference. Moreover, the manner in which
the Auto EcoView function changes brightness also diers
according to the changed value.
• When “DICOM” is selected for the color mode, the Auto
EcoView setting is turned “O”.
Advanced
Settings
Maximum
Minimum
Brightness
Set the range for automatic brightness adjustment.
By setting the maximum value and minimum value of the
adjustment range in advance, the brightness will be adjusted
automatically within the set range.
Setting Range: 0 to 100
Note
• The maximum and minimum brightness values cannot be
set to the same value.
Ambient Light
Using the default setting is recommended.
(Default setting: “Bright” for maximum value, “Dark” for minimum
value)
Setting Range: Bright, Standard, Dark
Note
• For details on the “Ambient Light” setting, refer to our web
site (www.eizoglobal.com).
Reset Return the advanced settings to their default values.
11
Chapter 2 Basic Adjustment/Setting
2-5. Adjusting Brightness
The brightness of the screen can be adjusted to suit the installation environment or personal preference.
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD
back panel).
Setting Range
0 to 100
Note
• When Auto EcoView is set to “On”, the adjustment range is restricted as follows. (For details on Auto EcoView,
see “Auto EcoView” (page 11).)
- The brightness setting cannot be increased or decreased past the maximum and minimum brightness values
specied in the advanced settings of Auto EcoView.
- Brightness may not be adjusted when the installation environment of the monitor is excessively bright or dark.
2-6. Adjusting Volume
The volume of the speakers and headphones can be set individually.
Setting Range
0 to 30
12
Chapter 2 Basic Adjustment/Setting
Chapter 3 Advanced Adjustment/Setting
This chapter describes the advanced monitor adjustment and setting procedures using the Setting menu.
For basic functions, see “Chapter 2 Basic Adjustment/Setting” (page 9).
3-1. Basic Operation of the Setting menu
1.
Menu display
1. Press any switch (except ).
The operation guide appears.
2. Select .
The Setting menu appears.
2.
Adjusting/setting
1. Select a menu to adjust/set with and select .
The Sub menu appears.
2. Select an item to adjust/set with and select .
The Adjustment/Setting menu appears.
3. Perform adjustment/setting with or and select to accept the changes.
The Sub menu appears.
Selecting
during adjustment/setting will cancel the adjustment/setting and restore the state prior to
making changes.
3.
Exiting
1. Selecting several times will terminate the Setting menu.
13
Chapter 3 Advanced Adjustment/Setting
3-2. Setting Menu Functions
●
Color Adjustment
The color mode setting status can be adjusted according to personal preference.
Attention
• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more
after power to the monitor has been turned on before adjusting the monitor.
• The same image may be observed in dierent colors on multiple monitors due to monitor-specic
characteristics. Make ne color adjustments visually when matching colors across multiple monitors.
Function
Color Mode
(Functions that can be adjusted
dier depending on the color
mode.)
√: Adjustable -: Not adjustable
Description
User1
User2
sRGB Paper
DICOM
Color Mode √ √ √ √ Select the desired mode according to the monitor
application.
The color setting status can also be adjusted
according to personal preference. Select the
mode for adjustment and perform adjustment
using the relevant functions.
Setting Range: User1, User2, sRGB, Paper, DICOM
Note
• For details on the adjustment status of each
mode, see “2-3. Switching Display Modes
(Color Modes)” (page 10).
Brightness √ √ √ -
The screen brightness is adjusted by changing
the brightness of the backlight (light source from
the LCD back panel).
Setting Range: 0 to 100
Note
• If the image is too dark even when the
brightness is set to 100, adjust the contrast.
14
Chapter 3 Advanced Adjustment/Setting
Function
Color Mode
(Functions that can be adjusted
dier depending on the color
mode.)
√: Adjustable -: Not adjustable
Description
User1
User2
sRGB Paper
DICOM
Contrast √ - - - The brightness of the screen is adjusted by
varying the video signal level.
Setting Range: 0 to 100
Note
• A contrast of 50 displays every color
gradation.
• When adjusting the monitor, it is
recommended to perform brightness
adjustment, which does not lose gradation
characteristics, prior to contrast adjustment.
• Perform contrast adjustment in the following
cases.
- If the image is too dark even when the
brightness is set to 100 (Set the contrast to
higher than 50.)
Temperature √ - √ -
Adjust the color temperature.
The color temperature is normally used to express
the hue of “White” and/or “Black” with a numerical
value. The value is expressed in degrees “K”
(Kelvin).
The screen becomes reddish at low color
temperatures and bluish at high color
temperatures, similar to the temperatures of a
ame. A gain preset value is set for each color
temperature setting value.
Setting Range: O, 4000 K to 10000 K
(in increments of 500 K. 9300 K is included.)
Note
• The value shown in “K” is available only as a
reference.
• “Gain” allows you to perform more advanced
adjustment.
• If set to “O”, the image is displayed in the
preset color of the monitor (Gain: 100 for
each RGB channel).
• When the gain is changed, the color
temperature setting changes to “O”.
15
Chapter 3 Advanced Adjustment/Setting
Function
Color Mode
(Functions that can be adjusted
dier depending on the color
mode.)
√: Adjustable -: Not adjustable
Description
User1
User2
sRGB Paper
DICOM
Gamma √ - - - Adjust the gamma.
While the brightness of the monitor varies
depending on the input signal, the variation rate
is not proportional to the input signal. Maintaining
the balance between the input signal and
brightness of the monitor is referred to as “Gamma
correction”.
Setting Range: 1.8, 2.0, 2.2, 2.4
Note
• If “Paper” is selected for the color mode,
“Paper” is displayed for the gamma value.
• If “DICOM” is selected for the color mode,
“DICOM” is displayed for the gamma value.
Advanced
Settings
Hue √ - - -
Adjust the hue.
Setting Range: -50 to 50
Note
• Using this function may prevent some color
gradations from being able to be displayed.
Saturation √ - - -
Adjust the color saturation.
Setting Range: -50 to 50
Note
• Using this function may prevent some color
gradations from being able to be displayed.
• The minimum value (-50) changes the screen
to monochrome.
Gain √ - - -
The brightness of each red, green, and blue color
component is referred to as “Gain”. The hue of
“white” can be changed by adjusting the gain.
Setting Range: 0 to 100
Note
• Using this function may prevent some color
gradations from being able to be displayed.
• The gain value changes according to the
color temperature.
• When the gain is changed, the color
temperature setting changes to “O”.
Reset √ √ √ - Reset any color adjustments for the currently
selected color mode back to the default settings.
16
Chapter 3 Advanced Adjustment/Setting
●
Signal Settings
Set the method for outputting the signal input from the PC to the monitor.
Function
Input Signal
(The setting range of each
function diers depending on the
input signal.)
√: Settable -: Not settable
Description
DisplayPort
DVI D-Sub
Sharpness √ √ √
When an image is displayed in low resolution, text
or lines in the displayed image may be blurred. This
function reduces this blurring eect.
Setting Range: -2 to 2
Note
• The sharpening setting may not be required
depending on the display resolution.
(“Sharpness” cannot be selected in such
cases.)
Analog
Adjustment
Auto Screen
Adjust
- - √
Screen ickering, display position, and size can
be adjusted automatically. Selecting “Auto Screen
Adjust” displays a message. Select “Yes” to enable
this function.
Note
• The automatic screen adjustment function
works correctly when an image is fully
displayed over the entire displayable area of
the screen. It does not work properly in the
following cases:
- When an image is only displayed on part of
the screen (command prompt window, for
example)
- When a black background (wallpaper, etc.) is
used
Also, this function may not work properly with
some graphic boards.
• When a signal is input into the monitor for
the rst time or when a resolution or vertical/
horizontal scan frequency not used before is
set, the self adjustment function will activate
automatically (only for signals with a resolution
of 800×600 (SVGA) or higher).
Auto Range
Adjust
- - √ Every color gradation (0 to 255) can be displayed
by automatically adjusting the signal output level.
Selecting “Auto Range Adjust” displays a message.
Select “Yes” to enable this function.
17
Chapter 3 Advanced Adjustment/Setting
Function
Input Signal
(The setting range of each
function diers depending on the
input signal.)
√: Settable -: Not settable
Description
DisplayPort
DVI D-Sub
Clock - - √
Flickering of vertical lines on the screen or part of
the screen can be reduced.
Note
• Use the operation switches ( ) to
make ne adjustments so as not to miss any
adjustment points.
Phase - - √
Flickering and blurring over the entire screen can
be reduced.
Note
• Flickering and blurring may not be completely
eliminated depending on your PC or graphics
board.
• After setting, adjust the “Clock” again if vertical
bars appear.
Hor. Position
Ver. Position
- - √
The display position (horizontal and vertical) of the
screen can be adjusted.
Note
• Since the number of pixels and pixel positions
are xed on the LCD monitor, only one position
is provided to display images correctly. Position
adjustment is made to shift an image to the
correct position.
Sound Source √ - -
The audio source can be changed when receiving
DisplayPort signal input.
Setting Range: Stereo Mini Jack, DisplayPort
Note
• This setting is xed to “Stereo Mini Jack” when
receiving DVI signal input or D-Sub signal
input.
18
Chapter 3 Advanced Adjustment/Setting
●
Preference Settings
The monitor’s settings can be congured to suit the usage environment or personal preference.
Function Description
Menu Rotation Change the orientation of the Setting menu when using the monitor screen in the
portrait display position.
Setting Range: 0°, 90°
Note
• Make sure to turn the monitor screen after pulling the screen up to the uppermost
position of the stand and tilting the screen upward.
• When using the monitor screen in a portrait position, a graphics board that supports
portrait display is required. When placing the monitor in a portrait position, the
settings of your graphics board need to be changed. Refer to the User’s Manual of
the graphics board for details. Also refer to our web site (www.eizoglobal.com).
Power Save
The monitor can be set to enter power saving mode according to the state of the PC.
The monitor changes to power saving mode about 15 seconds after signal input ceases
to be detected.
When the monitor has shifted to power saving mode, images are not displayed on the
screen.
• Exiting power saving mode
- If the monitor receives input, it automatically exits power saving mode and returns
to the normal display mode.
Setting Range: On, O
Note
• At the time of shifting to power saving mode, a message that indicates the transition
is displayed 5 seconds in advance.
• When you are not using the monitor, you can disconnect the power plug so that the
power is cut completely.
• Power consumption varies even when the stereo mini jack cable is connected.
Power Indicator The power indicator (white) can be turned o during screen display.
Setting Range: On, O
Monitor Reset
Restore all settings to their default values except for the following settings.
• Settings on the “Administrator Settings” menu
Note
• For details on default settings, see “Main Default Settings” (page 32).
19
Chapter 3 Advanced Adjustment/Setting
●
Language
The display language for menus and messages can be selected.
Setting Range
English, Deutsch, Français, Español, Italiano, Svenska, Japanese, Simplied Chinese, Traditional
Chinese
Attention
• The display language of the “Administrator Settings” menu cannot be changed.
●
Information
Monitor information (product name, serial number, usage time, resolution, and input signal) can be
checked.
Example:
20
Chapter 3 Advanced Adjustment/Setting
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
în alte limbi
- English: Eizo S1934 User manual
Lucrări conexe
-
Eizo EV2456 Manual de utilizare
-
-
-
Eizo S1933 Manual de utilizare
-
Eizo FDF2382WT Manual de utilizare
-
-
-
-
-