Sames A 25 Manual de utilizare

Marca: Sames

Model: A 25

Categorie: Pulverizator de vopsea

Tip: Manual de utilizare

DOCUMENTATION

GUN

A 25

PNEUMATIC

Manual : 582.055.110 - UK - 1905

Date : 14/05/19

Supersede : 27/05/16

Modif. :

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents relating to

this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN N° : 578.008.130-1802

578.008.130 1802

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

FR UK DE

Pour une utilisation sure, Il est de votre responsabilité

de :

Lire attentivement tous les documents contenus

dans le CD joint avant la mise en service de

l’équipement,

D’installer, d’utiliser, d’entretenir et de réparer

l’équipement conformément aux préconisations de

SAMES KREMLIN ainsi qu’aux réglementations

nationales et/ou locales,

Vous assurez que les utilisateurs de cet équipement

ont été formés, ont parfaitement compris les règles de

sécurité et qu’ils les appliquent.

To ensure safe use of the machinery, it is your

responsibility to:

Carefully read all documents contained on the

enclosed CD before putting the machinery into service,

Install, use, maintain and repair the machinery in

accordance with SAMES KREMLIN's recommendations

and national and/or local regulations,

Make sure that the users of the machinery have

received proper training and that they have perfectly

understood the safety rules and apply them.

Eine sichere Nutzung setzt voraus, dass Sie: :

alle in der CD enthaltenen Dokumente vor der

Inbetriebnahme der Anlage aufmerksam lesen,

die Anlage im Einklang mit den Empfehlungen von

SAMES KREMLIN sowie mit den nationalen und/oder

lokalen Bestimmungen installieren, verwenden,

warten und reparieren,

sich vergewissern, dass die Nutzer dieser Anlage

angemessen geschult wurden, die

Sicherheitsbestimmungen verstanden haben und sie

anwenden.

ES IT PT

Para una utilización segura, será de su

responsabilidad:

leer atentamente todos los documentos que se

incluyen en el CD adjunto antes de la puesta en servicio

del equipo,

instalar, utilizar, efectuar el mantenimiento y reparar

el equipo con arreglo a las recomendaciones de

SAMES KREMLIN y a la normativa nacional y/o local,

cerciorarse de que los usuarios de este equipo han

recibido la formación necesaria, han entendido

perfectamente las normas de seguridad y las aplican.

Per un uso sicuro, vi invitiamo a:

leggere attentamente tutta la documentazione

contenuta nel CD allegato prima della messa in

funzione dell'apparecchio,

installare, utilizzare, mantenere e riparare

l'apparecchio rispettando le raccomandazioni di SAMES

KREMLIN, nonché le normative nazionali e/o locali,

accertarvi che gli utilizzatori dell'apparecchio

abbiano ricevuto adeguata formazione, abbiano

perfettamente compreso le regole di sicurezza e le

applichino.

Para uma utilização segura, é da sua

responsabilidade:

Ler atentamente todos os documentos incluídos no

CD em anexo antes de pör o equipamento em

funcionamento,

Proceder à instalação, utilização, manutenção e

reparação do equipamento de acordo com as

preconizações de SAMES KREMLIN, bem como com

outros regulamentos nacionais e/ou locais aplicáveis,

Assegurar-se que os utilizadores do equipamento

foram devidamente capacitados, compreenderam

perfeitamente e aplicam as devidas regras de

segurança.

NL SE FI

Voor een veilig gebruik dient u:

alle document op de bijgevoegde cd aandachtig te

lezen alvorens het apparaat in werking te stellen,

het apparaat te installeren, gebruiken, onderhouden

en repareren volgens de door SAMES KREMLIN

gegeven aanbevelingen en overeenkomstig de

nationale en/of plaatselijke reglementeringen,

zeker te stellen dat de gebruikers van dit apparaat

zijn opgeleid, de veiligheidsregels perfect hebben

begrepen en dat zij die ook toepassen.

För en säker användning av utrustningen ansvarar ni

för följande:

Läs noga samtliga dokument som finns på den

medföljande cd-skivan innan utrustningen tas i drift.

Installera, använd, underhåll och reparera

utrustningen enligt anvisningarna från SAMES

KREMLIN och enligt nationella och/eller lokala

bestämmelser.

Försäkra er om att användare av denna utrustning

erhållit utbildning, till fullo förstått säkerhetsföreskrifterna

och tillämpar dem.

Käytön turvallisuuden varmistamiseksi

velvollisuutesi on:

Lukea huolella kaikki CD:llä olevat asiakirjat ennen

laitteiston käyttöönottoa,

Noudattaa laitteiston asennuksessa, käytössä,

kunnossapidossa ja huollossa SAMES KREMLIN in

suosituksia sekä kansallisia ja/tai paikallisia

määräyksiä,

Varmistaa, että laitteiston käyttäjät ovat koulutettuja

ja ymmärtävät täysin turvallisuusmääräykset ja miten

niitä sovelletaan.

PL CS SL

Dla zapewnienia bezpiecznego użytkowania na

użytkowniku spoczywa obowiązek:

 Uważnego zapoznania się ze wszystkimi

dokumentami znajdującymi się na załączonej płycie CD

przed pierwszym uruchomieniem urządzenia,

 Instalowania, użytkowania, konserwacji i naprawy

urządzenia zgodnie z zaleceniami firmy SAMES

KREMLIN oraz z przepisami miejscowymi,

 Upewnienia, że wszyscy przeszkoleni użytkownicy

urządzenia zrozumieli zasady bezpieczeństwa i stosują

się do nich.

Pro bezpečné používání jste povinni:

 Před uvedením zařízení do provozu si pozorně

přečíst veškeré dokumenty obsažené na přiloženém

CD,

Nainstalovat, používat, udržovat a opravovat

zařízení v souladu s pokyny firmy SAMES KREMLIN

a s národními a/nebo místními legislativními předpisy,

 Ujistit se, že uživatelé tohoto zařízení byli vyškoleni,

že dokonale pochopili bezpečnostní pravidla a že je

dodržují.

Za varno uporabo ste dolžni:

 natančno prebrati vse dokumente na CD pred

zagonom stroja,

inštalirati, uporabljati, vzdrževati in popravljati

opremo po določilih SAMES KREMLIN in v skladu z

veljavnimi nacionalnimi in/ali lokalnimi predpisi,

poskrbeti, da so uporabniki te opreme ustrezno

usposobljeni, poznajo varnostne predpise in da jih

upoštevajo.

SK HU RO

V záujme bezpečného je vašou povinnosťou:

 pozorne si prečítať všetky dokumenty obsiahnuté na

priloženom CD predtým, ako zariadenie uvediete do

prevádzky,

 nainštalovať, používať, udržiavať a opravovať

zariadenie v súlade s odporúčaniami spoločnosti

SAMES KREMLIN a národnými a/alebo miestnymi

predpismi,

 uistiť sa, že používatelia tohto zariadenia boli

zaškolení, riadne porozumeli pravidlám bezpečnosti a

používajú ich.

A biztonságos használat érdekében az Ön

felelőssége, hogy:

 a berendezés üzembe helyezése előtt figyelmesen

elolvassa a mellékelt CD által tartalmazott összes

dokumentumot,

a berendezést a SAMES KREMLIN ajánlasainak

valamint a nemzeti és/vagy helyi szabályozásoknak

megfelelően helyezze üzembe, használja, tartsa karban

és javítsa,

megbizonyosodjon róla, hogy a berendezés

felhasználói képzettek, tökéletesen megértették és

alkalmazzák a biztonsági előírásokat.

Pentru o utilizare sigură, este responsabilitatea dvs.

să:

 Citiţi cu atenţie toate documentele de pe CD-ul

anexat, înainte de punerea în funcţiune a

echipamentului,

 Instalaţi, utilizaţi, întreţineţi şi reparaţi echipamentul

conform instrucţiunilor SAMES KREMLIN precum şi

reglementărilor naţionale şi/sau locale,

 Vă asiguraţi că utilizatorii acestui echipament au

fost instruiţi, au înţeles perfect regulile de securitate şi

le aplică integral.

Déclaration(s) de conformité au verso de ce document / Declaration(s) of conformity at the back of this document / Konformitätserklärung(en) auf der Rückseite dieser Unterlage

/ Declaración (es) de conformidad en el reverso de este documento / Dichiarazione/i di conformità sul retro del presente documento

/ Declaração(ções) de conformidade no verso do documento / Conformiteitsverklaring(en) op de keerzijde van dit document / Försäkran om överensstämmelse på omstående sida

av detta dokument / Vaatimustenmukaisuusvakuutukset tämän asiakirjan kääntöpuolella / Deklaracja(e) zgodności na odwrocie dokumentu

/ Prohlášení o shodě se nachází/nacházejí na zadní straně tohoto dokumentu / Deklaracija(e) o skladnosti na hrbtni strani tega dokumenta / Vyhlásenie/-a o zhode sa nachádzajú na

zadnej strane dokumentu / A dokumentum hátlapján szereplő megfelelőségi nyilatkoz(ok) / Declaraţii de conformitate pe versoul acestui document

SAMES KREMLIN - 2 - N° : 578.008.130-1802

DECLARATION UE DE CONFORMITE

UE DECLARATION OF CONFORMITY

EU- KONFORMITÄTSERKLÄRUNG

DECLARACIÓN UE DE CONFORMIDAD

DICHIARAZIONE DI CONFORMITÀ UE

DECLARAÇÃO UE DE CONFORMIDADE

EU-CONFORMITEITSVERKLARING

EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

EU- VAATIMUKSENMUKAISUUSVAKUUTUS

DEKLARACJA ZGODNOŚCI UE

EU PROHLÁŠENÍ O SHODĚ

IZJAVA EU O SKLADNOSTI

VYHLÁSENIE O ZHODE

EU-MEGFELELŐSÉGI NYILATKOZAT

DECLARAŢIA DE CONFORMITATE UE

Le fabricant / The manufacturer / Der Hersteller

/ El fabricante / Il produttore / O fabricante

/ De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce

/ Proizvajalec / Výrobca / Gyártó / Fabricantul:

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - FRANCE

Tél. : 33 (0)4 76 41 60 60

Déclare que le matériel désigné ci-après / Herewith declares that the equipment / erklärt hiermit, dass die / Declara que el material designado a

continuación / Dichiara che il materiale sottoindicato / Declara que o material a seguir designado / verklaart dat de hieronder aangeduide apparatuur

/ Kungör att den utrustning som anges här nedan / ilmoittaa, että alla mainitut laitteistot / Oświadcza, że wymienione poniżej urządzenia / Prohlašuje,

že níže uvedené vybavení / Izjavlja, da je opisana oprema spodaj / Vyhlasuje, že zariadenie uvedené nižšie / Kijelenti, hogy a megjelölt anyag a

továbbiakban / Declară că echipamentul precizat mai jos:

PISTOLETS AUTOMATIQUES DE PULVERISATION PNEUMATIQUES / AIRSPRAY AUTOMATIC SPRAYING GUNS

/ AUTOMATIK LUFTSPRITZPISTOLEN / PISTOLAS AUTOMÁTICAS DE PULVERIZACIÓN NEUMÁTICAS

A 25

A 25 F

A 26

A 28

A 29

A 35

A 3

Est conforme à la législation d’harmonisation de l’Union applicable suivante / Is in conformity with the relevant Union harmonisation legislation / Erfüllt

die einschlägigen Harmonisierungsrechtsvorschriften der Union / es conforme con la legislación de armonización pertinente de la Unión / è conforme

alla pertinente normativa di armonizzazione dell’Unione / in overeenstemming met de desbetteffende harmonisatiewetgeving van de Unie / med den

relevanta harmoniserade unionslagstiftningen / on asiaa koskevan unionin yhdenmukaistamislainsäädännön vaatimusten mukainen / jest zgodny z

odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego / Shoduje se s následující příslušnou evropskou harmonizační legislativou

/ V skladu s harmonizirano zakonodajo Unije / Je v súlade s uplatniteľnými harmonizačnými právnymi predpismi EÚ / Megfelel a következő

alkalmazandó uniós harmonizációs szabályozásnak / Este conform cu legislaţia aplicabilă de armonizare de mai jos

Directive ATEX / ATEX Directive / ATEX Richtlinie / Directiva ATEX / Direttiva ATEX / Diretiva ATEX

/ ATEX-Richtijn / ATEX-direktivet / ATEX-direktivi / Dyrektywa ATEX / Směrnice ATEX / Direktiva ATEX / Smernica ATEX

/ ATEX-irányelv 2014/34/UE

II 2G IIA T6

SAMES KREMLIN - 3 - N° : 578.008.130-1802

La présente déclaration de conformité est établie sous la seule responsabilité du fabricant / This declaration of conformity is issued under the sole

responsibility of the manufacturer / Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller / La presente

declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante / La presente dichiarazione di conformità è rilasciata sotto la

responsabilità esclusiva del fabbricante / A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante / Deze

conformiteitsverklaring wordt verstrekt onder volledige verantwoordelijkheid van de fabrikant / Denna försäkran om överensstämmelse utfärdas på

tillverkarens eget ansvar / Tämä vaatimustenmukaisuusvakuutus on annettu valmistajan yksinomaisella vastuulla / Niniejsza deklaracja zgodności

wydana zostaje na wyłączną odpowiedzianość producenta / Toto prohláŝení o skodě se vydává na výhradní odpovědnost výrobce / Za izdajo te izjave

o skladnosti je odgovoren izključno proizvajalec / Toto vyhlásenie o zhode sa vydáva / na vlastnú zodpovednosť výrobcu / Ezt a megfelelőségi

nylatkozatot a gyártó kizárólagos felelőssége mellett adják ti / Prezenta declaraţie de conformitate este emisă pe răspunderea exclusivă a

producătorului.

Philippe PROVENAZ

Directeur Innovation & Développement / Innovation & Development

Director / Direktor für Innovation & Entwicklung / Director de

Inovación y Desarrollo / Direttore Innovazione e sviluppo

/ Diretor de Inovação / Manager Innovatie en Ontwikkeling / Direktör

för Forskning och Utveckling / Innovaatio- ja kehitysjohtaja

/ Dyrektor ds. Innowacji I Rozwoju / Ředitel pro inovace a vývoj

/ Direktor za inovacije in razvoj / Riaditeľ pre inováciu a rozvoj

/ Innovációs és fejlesztési igazgató / Director Inovaţie şi Dezvoltare

Fait à Meylan, le / Established in Meylan, on / Geschehen zu Meylan, am / En Meylan, a / Redatto a Meylan, / Vastgesteld te Meylan, / Utformat i

Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, / Întocmită la Meylan,

pe data de 15/02/2018 - 02/15/2018

SAMES KREMLIN N° : 578.001.130-UK-1804

INSTALLATION AND SAFETY

INSTRUCTIONS

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.001.130-UK-1804

1. SAFETY INSTRUCTIONS

GENERAL SAFETY INSTRUCTIONS

CAUTION : Th

e equipment can be dangerous if you do not follow our

instructions concerning installation and servicing described in this manual

and in accordance with applicable European standards and local national safety

regulations.

Please carefully read all the

instruction literature before operating your

equipment.

Only trained operators can use the equipment.

The foreman must ensure that the operator has understood the safety instructions for this equipment as

well as the instructions in the manuals for the different parts and accessories.

Read carefully all instruction manuals, label markings before operating the equipment.

Incorrect use may result in injury. This equipment is for professional use only. It must be used only for

what it has been designed for. Never modify the equipment. The parts and accessories supplied must be

regularly inspected. Defective or worn parts must be replaced.

Guards (motor cover, coupling shields, connectors,…) have been designed for a

safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

property damage due to destruction, the overshadowing or the partial or total

removal of the guards.

Never exceed the equipment components' maximum working pressure.

Comply with regulations concerning safety, fire risks, electrical regulations in force in the country of final

destination of the material. Use only products or solvent compatible with the parts in contact with the

material (refer to data sheet of the material manufacturer).

PICTOGRAMS

NIP HAZARD WARNING

MOVING

ELEVATOR

WARNING

MOVING PARTS

WARNING

MOVING SHOVEL

DO NOT

EXCEED THIS

PRESSURE

HIGH

PRESSURE

HAZARD

RELIEF OR

DRAIN VALVE

WARNING

HOSE UNDER

PRESSURE

WEAR GLASSES

OBLIGATORY

WEAR OF

GLOVES IS

OBLIGATORY

PRODUCT

VAPOR

HAZARDS

WARNING

HOT PARTS OR

AREAS

ELECTRICAL

HAZARD

WARNING

FIRE HAZARDS

EXPLOSION

HAZARDS

GROUNDING WARNING

(USER)

WARNING

SERIOUS

INJURIES

SAMES KREMLIN - 2 - N° : 578.001.130-UK-1804

PRESSURE HAZARDS

Current legislation requires that an air relief valve be fitted in the air supply circuit to the air

motor to prevent over pressurisation. This safety feature,ensures that it is not possible to supply

the air motor with excessive air pressure that may cause injury.

Please ensure that a material drain valve is fitted in the fluid circuit to drain and depressurise the

circuit. Once depressurised and drained, work /servicing may then commence on the equipment

Please remember to close these valves when restarting the system.

HIGH PRESSURE INJECTION HAZARDS

When working with high pressure equipment, special care is required. Fluid leaks can occur.

There is a risk of material being injected to any exposed parts of body, this could cause severe

injury :

• medical care must be sought immediately if paint is injected under the skin or in other

parts of the body (eyes, fingers).

• never point the spray gun at any one. Never try to stop the spray with your hands or fingers

nor with rags or similars.

• follow the shut down procedure and always depressurize air and fluid circuits before

carrying out any servicing on the gun (cleaning, checking, maintenance of the material or

cleaning of the gun nozzles).

• for the guns equipped with a safety device, always lock the trigger when not in use.

FIRE - EXPLOSION - SPARKS - STATIC ELECTRICITY HAZARDS

A poor earth connection, inadequate ventilation, sparks or static electricity can cause an

explosion or fire. to avoid these risks when using or servicing SAMES KREMLIN equipment, the

following safety procedures must be followed :

• ensure a good earth connection and ground the parts to be handled i.e. solvents, materials,

components and equipment,

• ensure adequate ventilation,

• keep working area clean and free from waste solvents, chemicals, or solid waste i.e. rags,

paper and empty chemicals drums,

• never use electrical switches / power if in an atmosphere of volatile solvent vapour,

• stop working immediately in case of electrical arcs,

• never store chemicals and solvents in the working area.

• use paint whose flash point is the highest possible to prevent from any formation of gas

and inflammable vapours (refer to materials' safety instructions),

• install a cover on the drums to reduce the diffusion of gas and vapours in the spraybooth.

TOXIC PRODUCT HAZARDS

Toxic products or vapours can cause severe injury not only though contact with the body, but also

if the products are ingested or inhaled. It is imperative :

• to know the material products and their risks,

• notified or hazardous materials must be stored in accordance with the regulations,

• the material must be stored in an appropriate container, never place materials in a

container where there is a risk of spillage or leakage,

• a procedure must be applied for the safe disposal of waste material. It must comply with all

prevailing regulations and legislations of the country where the equipment is to be used,

• protective clothing should always be worn in compliance with the material manufacturers'

recommendations,

• depending on the application and chemical safety instructions, safety glasses, hearing

protective earplug, gloves, foot wear, protective masks and possible breathing equipment

should be worn to comply with the regulations (Refer to chapter "Safety equipment of

SAMES KREMLIN selection guide).

SAMES KREMLIN - 3 - N° : 578.001.130-UK-1804

CAUTION!

It is forbidden to use material containing high concentrations of halogenated hydrocarbon

solvents with aluminium or zinc fillers .Non-compliance with the instructions may cause

explosion risk causing serious or fatal injury.

EQUIPMENT REQUIREMENTS

Guards (motor cover, coupling shields, connectors,…) have been designed for

a safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure

and / or property damage due to destruction, the overshadowing or the

partial or total removal of the guards.

PUMP

Before carrying out any work, it is imperative to read and clearly understand the disassembly and

reassembly instructions before servicing. The operator must understand the equipment and the

safety instructions. These instructions are available in the equipment manuals.

The air motor is designed to be mounted with a pump. Never modify any components or

couplings. When operating, please keep hands away from moving parts. Before starting up the

equipment, please read the PRESSURE RELIEF instructions. Please ensure that any relief or

drain valves fitted are in good working order.

HOSES

• Keep hoses out of circulation areas, moving parts or hot surfaces,

• Never expose product hoses to temperature higher than + 60°C / 140° F or lower than 0°C

/ 32° F,

• Never pull or use the hoses to move the equipment,

• Tighten all fittings as well as the hoses before operating the equipment,

• Check the hoses regularly; change them if they are damaged,

• Never exceed the maximum working pressure (MWP) indicated on the hose.

USED PRODUCTS

Considering the wide variety of products that are available and can be used in our equipment it is

impossible to check and make recommendations for all chemical data,regarding the risks of

possible chemical attack and their long term chemical reaction

SAMES KREMLIN can not be held liable for :

• compatibility of wetted parts,

• risks to staff and the surroundings,

• for worn or defective parts, for faulty equipment or units, or the qualitiy of final product.

It is the responsibility of the user to know and prevent any possible risks such as toxic vapours,

fires or explosions. He shall determine the risks of immediate reactions or pursuant to repeated

exposures of the staff,

SAMES KREMLIN shall not be liable for physical injuries, direct or indirect material damages

caused by the use of chemicals.

SAMES KREMLIN - 4 - N° : 578.001.130-UK-1804

2. HANDLING



Check the weight and the dimensions of the equipment

(



refer to 'Technical features' section of the instruction manual

If weight and dimensions are too important, the unloading must be carried out by means of a forklift or

any other appropriate means with a qualified personnal and in a clear horizontal area to prevent from

risks of damage injury or an accident.

The centre of gravity is not in the centre of the machine : carry out by hand a stability-test after having

lifted the whole at 10 cm / 3.937" maximum.

After the unloading, the handling of the whole (eg: elevator pump) is carried out by means of a pallet

truck taking the bottom part of the frame.

Remark : Each pump motor is fitted with a ring. The ring is designed for the hoisting of one

pump and can not be used for the handling of the complete assembly.

3. STORING

Storing before installation :

- Storing ambient temperature : 0 / +50 °C / 0 / +122°F

- Protect the whole against dust, water trickling, dampness and shocks.

Storing after installation :

- Operating temperature : +15 / +35 °C / +59 / +138.2° F

- Protect the whole against dust, water tricling, dampness and shocks.

4. INSTALLATION OF THE EQUIPMENT

The machine is installed on a stable horizontal floor (for eg a concrete flag).

The machine shall be made stable by the use of holding down bolts or by the use of other anchoring

methods, strong enough to prevent unintended bodily movement of the equipment.

To avoid risks caused by static electricity, the equipment as well as its components must

be grounded.

• For the pumping equipments (pumps, pneumatic rams, frame…), a section wire of 2.5

mm² is fixed on the material. Use this wire to connect the material to “the general ground”.

In case of severe environments (mechanical protection of the wire of earthing insufficient,

vibrations, mobile material…) where function damages at the ground are probable, the user

have to replace the provided wire of 2.5 mm² by a device more adapted to its environment

(wire with a more important section, bonding strip, fixing by thimble with eyelet…).

The continuity of the ground must be controlled by a qualified electrician. If the continuity of

the ground is not ensured, check the terminal, the wire and the earthing point. Never use the

material without have solved this problem.

• In the severe cases of environments (mechanical protection of the wire of earthing

insufficient, vibrations, mobile material…) where damages of the function put at the ground

are probable, the user will have to replace the wire of 2.5 mm² provided, by a device more

adapted to its environment (wire of more important section, bonding strip, fixing by thimble

with eyelet…),

• The gun must be 'grounded' via a material hose or an air hose. In case of spraying by

means of a gun with cup, the air hose must be conductive,

• The materials to be painted must also be grounded.

All the materials situated in the working area shall be grounded.

SAMES KREMLIN - 5 - N° : 578.001.130-UK-1804

• Never store more than necessary inflammable materials inside the working area,

• The materials must be stored into approved drums and grounded,

• Use only grounded metals containers for the use of cleaning solvents,

• Cardboard and paper are prohibited.

5. MARKING OF THE EQUIPMENT

Each equipment has a label plate with the name of the manufacturer, the equipment part number,

the interesting informations to use correctly the equipment (pressure, voltage,…) and sometimes

the above pictogram.

The equipment is designed with and consists of high quality materials and components which can

be re-used.

The 2012/19/UE European Directive covers all equipments with a crossed-out bin pictogram.

Please inform yourself about the collection systems for electric and electronic equipments.

Please act in accordance with local rules and do not dispose of old equipment with household

wastes. A correct disposal of old equipment will help prevent negative consequences for the

environment and health.

SAMES KREMLIN N° : 578.049.110-UK-1712

AUTOMATIC AIRSPRAY

GUN

A 25 - A 26

Disassembly / Reassembly

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to the equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NOT CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.049.110-UK-1712

CAUTION :

Before any intervention on the gun, shut off the compressed air supply and

depressurize the circuits controlling the opening of the gun.

The gun is manufactured under the ATEX agreement and can not be modified.

SAMES KREMLIN will not be held responsible for any failure to comply with that

instruction.

Index Instructions Description Part number

A 1 PTFE grease "TECHNILUB" grease

(10 ml) 560.440.101

A 2 Anti-seize grease Graphite grease box

(450 g / 1 lb) 560.420.005

C 1 Medium strength

Anaerobic Pipe sealant

Loctite 577 (250 ml) 544.180.015

S 1 Screwing torque

A 25, A 25 LP :

18 Nm / 13.28 ft/lbs

A 25 HTi, A 26 HTi :

12 Nm / 8.8 ft/lbs

S 1

A 1

A 2

SAMES KREMLIN - 2 - N° : 578.049.110-UK-1712

Before removing a component of the gun, some precautions have to be respected :

- Empty out the paint inside the cup or the receiver.

- Fill the cup or the receiver with cleaning solvent.

- Decrease the supply air pressure of the gun.

- Spray the solvent until it runs clear.

- Shut off the supply air pressure of the gun.

- Trigger the gun to depressurize the circuit.

- Empty out the solvent when using a gravity cup.

- Remove the part to be cleaned or changed.

Before reassemblying the different components, some precautions must be taken :

- Clean all the parts with the appropriate cleaning solvent and a brush.

- Install new seals if it is necessary after having lubricated them with PTFE grease.

- Install new parts if it is necessary.

 CHANGING THE SPRAY GUN

Shut off the air and product feeds to the gun.

Depressurize the circuits.

Remove the 4 screws (27).

Take out the gun.

Fit the replacement gun and change the seals (28 and 29).

Re-fit the 4 screws (27).

 CARTRIDGE AND NEEDLE

Unscrew the cylinder (22) - (paying attention to the springs (20 and 21).

Hold the entire needle and piston assembly (10 and 16) and pull it towards the back.

Remove the aircap (1) and the nozzle (6).

Loosen the screw (25) by two turns (fluid leakage detector).

Insert one of the screws (27) at the back in place of the needle and push or tap it until the cartridge

(13) comes out at the front.

Clean everything well with solvent and then blow it out with air.

Push in the new cartridge from the front.



IMPORTANT : with the head of the screw (27), push the cartridge to the back. Tap it

lightly if necessary.

Re-tighten the fluid leakage detector (25).

Re-fit the needle and piston assembly (10 and 16).

Fit the springs (20 and 21).

Screw on the cylinder (22).

Re-fit the nozzle (6) and the aircap (1), having unscrewed the needle adjustment knob (23).

Doc. 573.083.050

Date/Datum/Fecha : 16/03/17

Annule/Cancels/Ersetzt/Anula :

17/07/13

Modif. / Änderung :

Mise à jour / Update / Aktualisierung

/ Actualización

+ Ind. / Pos. 40 (029 300 026)

Pièces de rechange

Spare parts list

Ersatzteilliste

Piezas de repuesto

A 25

PISTOLET AUTOMATIQUE INOX (SANS EMBASE)

AUTOMATIC SPRAY GUN (WITHOUT BASE) - STAINLESS STEEL

AUTOMATIKPISTOLE EDELSTAHL (OHNE GRUNDPLATTE)

PISTOLA AUTOMÁTICA INOX (SIN BASE)

SAMES KREMLIN 2 Doc. / Dok. : 573.083.050

PISTOLET A 25 INOX SANS EMBASE / A 25 SPRAY GUN WITHOUT BASE

PISTOLE A 25 EDELSTAHL OHNE GRUNDPLATTE / PISTOLA A 25 INOX SIN BASE

A 25 #

Viscosité produit

/ Material viscosity

/ Viskosität des

Spritzmaterials

/ Viscosidad producto

Largeur de jet

/ Fan width

/ Strahlbreite

/ Anchura de abanico

Débit peinture

/ Material flow

rate

/ Ausflussrate

/ Caudal

pintura

sans projecteur

/ without projector

/ ohne Zerstäubereinheit

/ sin proyector

129 260 000

CA4 Mini

(cm / ") Maxi

(cm / ") (cc/mn - oz/mn)

207 Z 23 135 260 001 Fluide 20 s 6 / 2.36" 40 / 15.74" 120 / 4

209 Z 23 135 260 002 Fluide 20 s 6 / 2.36" 40 / 15.74" 200 / 7

212 NN 23 135 260 010 Fluide 20 s 6 / 2.36" 60 / 23.62" 400 / 14

215 N 23 135 260 008 Normale 30 s 8 / 3.15" 50 / 19.68" 600 / 21

218 N 23 135 260 009 Epaisse > 40 s 8 / 3.15" 50 / 19.68" 750 / 26

PIECES DE RECHANGE - PARTS IDENTIFICATION LIST - ERSATZTEILLISTE - PIEZAS DE REPUESTO

Ind # Désignation Description Bezeichnung Denominación Qté

*1 - Tête complète

(voir tableau) Aircap assembly

(refer to chart) Zerstäuberkopf kpl.

(siehe Tabelle) Cabezal completo

(consultar cuadro) 1

2 032 020 001 Bague de tête Aircap ring Überwurfring Anillo del cabezal 1

3 150 040 309 Joint de bague (les 10) Seal, ring (pack of 10) O-Ring (10 St.) Junta del anillo (x 10) 1

4 NC / NS Tête nue Aircap only Luftkappe Cabezal solo 1

*6 - Buse équipée

(voir tableau) Nozzle assembly

(refer to chart) Düse kpl.

(siehe Tabelle) Boquilla equipada

(consultar cuadro) 1

7 129 729 902 Bague de répartition

(les 10) Distribution ring

(pack of 10) Luftverteilerring

(10 St.) Anillo de distribución

(bolsa de 10) 1

8 NC / NS Buse Nozzle Düse Boquilla 1

9 129 209 902 Joint de buse (les 5) Seal, nozzle (pack of 5) O-Ring, Düse (5 St.) Junta de boquilla (x 5) 1

*10 - Pointeau complet

(voir tableau) Needle assembly

(refer to chart) Farbnadel kpl.

(siehe Tabelle) Aguja completa

(consultar cuadro) 1

11 NC / NS Pointeau Needle only Farbnadel Aguja 1

12 129 400 915 Joint (les 10) Seal (pack of 10) O-Ring (10 St.) Junta (x 10) 1

*13 129 251 100 Cartouche complète Cartridge assembly Nadelpackung, kpl. Cartucho completo 1

14 NC / NS Cartouche Cartridge Nadelpackung Cartucho 1

15 129 529 906 Joint FPM (les 10) Seal, FPM (x 10) O-Ring, FPM (10 St.) Junta FPM (x 10) 2

*16 129 251 200 Piston équipé Piston assembly Kolben, kpl. Pistón equipado 1

17 129 251 992 Joint R8 (les 10) Seal, R8 (pack of 10) O-Ring, R8 (10 St.) Junta R8 (bolsa de 10) 1

18 NC / NS Piston seul Piston only Kolben, alein Pistón solo 1

19 129 251 993 Joint R22 (les 10) Seal, R22 (pack of 10) O-Ring, R22 (10 St.) Junta R22 (bolsa de 10) 1

SAMES KREMLIN 3 Doc. / Dok. : 573.083.050

Ind # Désignation Description Bezeichnung Denominación Qté

*20 050 315 203 Ressort de pointeau Spring, needle Feder für Farbnadel Muelle de aguja 1

*21 050 313 504 Ressort de piston Spring, piston Feder für Kolben Muelle de pistón 1

22 029 251 401 Cylindre Cylinder Luftzylinder Cilindro 1

23 129 251 750 Butée de pointeau

complète Adjustment knob

assembly Nadelanschlag, komplett Tope de aguja completo 1

24 129 260 020 Corps Body Pistolenkörper Cuerpo 1

25 029 266 002 Témoin de fuite Detector, fluid leakage Leckageanzeige Testigo de fuga 1

26 129 529 903 Joint (les 10) Seal (x 10) Dichtung (10 St.) Junta (bolsa de 10) 1

27 930 151 548 Vis CHc M 6 x 50 Screw, CHc M 6 x 50 Schraube M 6 x 50 Tornillo CHc M 6 x 50 4

28 129 525 092 Joint (les 10) Seal (x 10) Dichtung (10 St.) Junta (bolsa de 10) 1

29 129 251 991 Joint (les 10) Seal (x 10) Dichtung (10 St.) Junta (bolsa de 10) 5

40 029 300 026 Goupille Pin Stift Pasador 1

A LA DEMANDE - ON REQUEST - AUF WUNSCH - A PETICIÓN

Ind. 30

Ind # Désignation Description Bezeichnung Denominación Qté

*30 129 260 300 Embase inox équipée Stainless steel base

assembly Gründplatte Edelstahl,

komplett Base inox equipada 1

*- 129 260 315 Embase inox nue, sans

raccord Stainless steel base

only, without fittings 

Grundplatte nackt, ohne

Anschlüsse Base inox sola, sin

racores 1

31 NC / NS Embase Base Grundplatte Base 1

32 NC / NS Insert inox Stainless steel insert Edelstahl Einsatz Inserto inox 1

33 933 151 221 Vis CHc M 5 x 16 Screw, CHc M 5 x 16 Schraube M 5 x 16 Tornillo

CHc M 5 x 16 2

*34 129 253 100 Pointeau des évents Fan air control Spritzstrahlregulier-

schraube Aguja control de

abanico 1

*35 129 971 002 Joint (les 10) Seal (x 10) Dichtung (10 St.) Junta (x 10) 1

36 129 529 907 Joint (les 10) Seal (x 10) Dichtung (10 St.) Junta (x 10) 1

37 905 124 901 Raccord (commande)

M 1/8 BSP - T 4 x 6 Quick disconnect

(control)

M 1/8 BSP - T 4 x 6

Steckanschluss für

Schlauch (Steuerung)

AG 1/8 BSP - T 4 x 6

Racor (aire de mando)

M 1/8 BSP - T 4 x 6 1

38 050 102 624 Raccord (air)

M 1/4 BSP - M 1/4 NPS Fitting (air),

double male, 1/4 BSP

- 1/4 NPS

Doppelnippel (Luft)

AG 1/4 BSP

- AG 1/4 NPS

Racor (aire)

M 1/4 BSP- M 1/4 NPS 1

39 905 190 401 Raccord coudé (pro

duit)

- M 1/4 BSP - T 6 x 8 Elbow fitting (fluid)

M 1/4 BSP - T 6 x 8 Winkelnippel (Material)

AG 1/4 BSP - T 6 x 8 Racor acodado

(producto)

M 1/4 BSP - T 4 x 6

- 906 333 102 Bouchon 1/4 G Plug, 1/4 G Blindstopfen, 1/4 G Tapón, 1/4 G 1

SAMES KREMLIN 4 Doc. / Dok. : 573.083.050

POCHETTES - KITS - SÄTZE - BOLSAS

* 129 251 995 Pochette de joints

(ind. 9, 12, 15, 17, 19,

26, 28, 29, 36)

Package of seals

(ind. 9, 12, 15, 17, 19,

26, 28, 29, 36)

Dichtungssatz

(Pos. 9, 12, 15, 17, 19,

26, 28, 29, 36)

Kit de juntas

"reparación"

(índ. 9, 12, 15, 17, 19,

26, 28, 29, 36)

* Pièces de maintenance préconisées.

* Preceding the index number denotes a suggested spare part.

* Bezeichnete Teile sind empfohlene Ersatzteile.

* Piezas de mantenimiento preventivas.

N C : Non commercialisé.

N S : Denotes parts are not serviceable separately.

N S : bezeichnete Teile gibt es nicht einzeln, sondern nur

komplett.

N C : no suministrado.

ACCESSOIRES - ACCESSORIES - ZUBEHÖR - ACCESORIOS

Ind. 50 Ind. 51

Ind # Désignation Description Bezeichnung Denominación Qté

- 029 253 002 Kit pour commande air à

distance Remote fan width

adjustor Kit für Spritzstrahl-

Fernverstellung Kit para mando aire a

distancia 1

50 049 351 000 Support de fixation pour

pistolet (16

longueur : 100 mm)

Gun mounting support

(16 / 5/8"

Length : 100 mm / 4 " )

Pistolenhalterug

(16 – Länge: 100 mm) Soporte de fijación para

pistola (16

longitud : 100 mm)

51 129 251 500 Butée de pointeau avec

indexage Indexed needle adjust kit Indexiertes

Nadeleinstellset Kit de regulación

indexado para el botón

aguja

SAMES KREMLIN 5 Doc. / Dok. : 573.083.050

Projecteur / Projector

/ Zerstäubereinheiten

/ Proyector

Tête / Aircap

Luftkappe / Cabezal Buse / Nozzle

Düse / Boquilla Pointeau / Needle

Nadel / Aguja

Ind. 1+6+10 Ind. 1 # Ind. 6 Ø (mm / ") # Ind. 10 #

207 Z 23

209 Z 23

212 Z 23

Z 23

132 021 100

207

209

212

0,7 / 0.027

0,9 / 0.035

1,2 / 0.047

134 021 100

134 020 100

134 020 200

7 - 9 - 12

033 251 100

212 N N 23 N 23 132 021 200 212 N 1,2 / 0.047 134 020 500 7 - 9 - 12 033 251 100

207 Z 23 A

209 Z 23 A

212 Z 23 A

Z 23 A

132 020 500

207

209

212

0,7 / 0.027

0,9 / 0.035

1,2 / 0.047

134 021 100

134 020 100

134 020 200

7 - 9 - 12

033 251 100

212 N N 23 C N 23 C 132 021 700 212 N 1,2 / 0.047 134 020 500 7 - 9 - 12 033 251 100

215 N 23

218 N 23 N 23

N 23 132 021 200

132 021 200 215

218 1,5 / 0.059

1,8 / 0.071 134 020 300

134 020 400 15 - 18

15 - 18 033 251 200

033 251 200

222 R 23

227 R 23 R 23

R 23 132 021 300

132 021 300 222

227 2,2 / 0.087

2,7 / 0.106 134 020 600

134 020 700 22 - 27

22 - 27 033 251 300

033 251 300

Jet rond tourbillonaire / Swirling round fan spraying / Rund-Drallstrahl / Abanico redondo turbulento

222 R 29

227 R 29 R 29

R 29 132 021 400

132 021 400 222

227 2,2 / 0.087

2,7 / 0.106 134 020 600

134 020 700 22 - 27

22 - 27 033 251 300

033 251 300

Pour application émail / For enamel application / Für Emaille-Applikation / Para aplicación esmalte

222 R 24

227 R 24 R 24

R 24 132 021 800

132 021 800 222

227 2,2 / 0.087

2,7 / 0.106 134 020 600

134 020 700 22 - 27

22 - 27 033 251 300

033 251 300

Pour application colle / For glue application / Für Kleber-Applkation / Para aplicación cola

215 G G 21

218 G G 21 G 21

G 21 132 021 600

132 021 600 215 G

218 G 1,5 / 0.059

1,8 / 0.071 134 021 200

134 021 300 15 - 18

15 - 18 033 251 200

033 251 200

Tête en laiton

/ Aircap in brass

/ Luftkappe aus Messing

/ Cabezal de latón

Buses traitées

/ Treated stainless steel

nozzle

/ Gehärtete Düse

/ Boquillas tratadas

Pointeaux traités

/ Treated stainless steel

needle

/ Gehärtete Materialnadel

/ Agujas tratadas

Pointeaux en polyacétal

/ Needle (polyacetal)

/ Nadel mit Polyacetal-Spitze

/ Agujas de poliacetato

# # # #

Z 23 A

N 23 C

132 020 550

132 021 750

207 T

209 T

212 T

215 T

218 T

222 T

227 T

134 025 050

134 025 100

134 025 200

134 025 300

134 025 400

134 025 600

134 025 700

07 - 09 T

12 T

15 - 18 T

22 - 27 T

033 251 050

033 251 700

033 251 500

033 251 600

07 - 09 -12 P

14 - 15 -18 P

033 251 400

033 251 410

SAMES KREMLIN 6 Doc. / Dok. : 573.083.050

ALLONGE - EXTENSION - VERLÄNGERUNGEN - ALARGADERAS

- Allonge Ø 8,

longueur : 150 mm,

jet latéral

Extension Ø 8 mm / 0.31",

length : 150 mm / 5.9",

lateral fan

Verlängerung Ø 8,

Länge : 150 mm,

Seitenstrahl

Alargaderas Ø 8,

lgongitud : 150,

abanico lateral

075 650 213 Buse de 12 Nozzle 12 Düse Gr. 12 Boquilla de 12

075 650 224 Buse de 18 Nozzle 18 Düse Gr. 18 Boquilla de 18

- Allonge Ø 8,

longueur : 250 mm,

jet latéral

Extension Ø 8 mm / 0.31",

length : 250 mm / 9.8",

lateral fan

Verlängerung Ø 8,

Länge: 250 mm,

Seitenstrahl

Alargaderas Ø 8,

longitud : 250 mm,

abanico lateral

075 650 111 Buse de 12 Nozzle 12 Düse Gr. 12 Boquilla de 12

075 650 122 Buse de 18 Nozzle 18 Düse Gr. 18 Boquilla de 18

- Allonge Ø 8,

longueur : 400 mm,

jet latéral

Extension Ø 8 mm / 0.31",

length : 400 mm / 15.7 ",

lateral fan

Verlängerung Ø 8,

Länge: 400 mm,

Seitenstrahl

Alargaderas Ø 8,

longitud : 400,

abanico lateral

075 650 311 Buse de 12 Nozzle 12 Düse Gr. 12 Boquilla de 12

075 650 322 Buse de 18 Nozzle 18 Düse Gr. 18 Boquilla de 18

075 750 111 Allonge Ø 20,

longueur : 400 mm,

jet circulaire

Extension Ø 20 mm / 0.8",

length : 400 mm / 15.7",

circular fan

Verlängerung Ø 20,

Länge: 400 mm,

Kreisstrahl

Alargaderas Ø 20,

longitud : 400 mm,

abanico circular

075 750 211 Allonge Ø 20,

longueur : 800 mm,

jet circulaire

Extension Ø 20 mm / 0.8",

length 800 mm / 31.5",

circular fan

Verlängerung Ø 20,

Länge: 800 mm,

Kreisstrahl

Alargaderas Ø 20,

longitud : 800 mm,

abanico circular

OPTION - ON REQUEST - OPTIONEN - OPCIÓN

Ind # Désignation Description Bezeichnung Denominación Qté

15 109 420 257 Joint EPDM (les 10) Seal, EPDM (x 10) O-Ring, EPDM (10 St.) Junta EPDM (x 10) 2

Doc. 573.084.050

Date/Datum/Fecha : 16/03/17

Annule/Cancels/Ersetzt/Anula :

17/07/13

Modif. / Änderung :

Mise à jour / Update / Aktualisierung

/ Actualización

+ Ind. / Pos. 40 (029 300 026)

+ 132 021 710 annulé / canceled

/ annuliert/ suprimido

Pièces de rechange

Spare parts list

Ersatzteilliste

Piezas de repuesto

A 25 LP PISTOLET AUTOMATIQUE INOX (SANS EMBASE)

AUTOMATIC SPRAY GUN (WITHOUT BASE) - STAINLESS STEEL

AUTOMATIKPISTOLE EDELSTAHL (OHNE GRUNDPLATTE)

PISTOLA AUTOMÁTICA INOX (SIN BASE)

Pagina se încarcă...

Sames A 25 Manual de utilizare

Marca: Sames

Model: A 25

Categorie: Pulverizator de vopsea

Tip: Manual de utilizare

Descărcați PDF

raport

în alte limbi

English: Sames A 25 User manual

Sames A 25 Manual de utilizare

Sames A 25 Manual de utilizare

în alte limbi

Lucrări înrudite

Alte documente