Sames A 26 Manual de utilizare

Sames
Marca
Sames
Model
A 26
Categorie
Pulverizator de vopsea
Tip
Manual de utilizare
DOCUMENTATION
GUN
A 26
PNEUMATIC
Manual : 582.070.110 – UK - 1905
Date : 14/05/19
Supersede : 12/04/17
Modif. :
TRANSLATION FROM THE ORIGINAL MANUAL
IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents relating to
this equipment (professional use only).
THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.
SAMES KREMLIN SAS
l
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
SAMES KREMLIN N° : 578.008.130-1802
578.008.130 1802
SAMES KREMLIN SAS
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
FR UK DE
Pour une utilisation sure, Il est de votre responsabilité
de :
Lire attentivement tous les documents contenus
dans le CD joint avant la mise en service de
l’équipement,
D’installer, d’utiliser, d’entretenir et de réparer
l’équipement conformément aux préconisations de
SAMES KREMLIN ainsi qu’aux réglementations
nationales et/ou locales,
Vous assurez que les utilisateurs de cet équipement
ont été formés, ont parfaitement compris les règles de
sécurité et qu’ils les appliquent.
To ensure safe use of the machinery, it is your
responsibility to:
Carefully read all documents contained on the
enclosed CD before putting the machinery into service,
Install, use, maintain and repair the machinery in
accordance with SAMES KREMLIN's recommendations
and national and/or local regulations,
Make sure that the users of the machinery have
received proper training and that they have perfectly
understood the safety rules and apply them.
Eine sichere Nutzung setzt voraus, dass Sie: :
alle in der CD enthaltenen Dokumente vor der
Inbetriebnahme der Anlage aufmerksam lesen,
die Anlage im Einklang mit den Empfehlungen von
SAMES KREMLIN sowie mit den nationalen und/oder
lokalen Bestimmungen installieren, verwenden,
warten und reparieren,
sich vergewissern, dass die Nutzer dieser Anlage
angemessen geschult wurden, die
Sicherheitsbestimmungen verstanden haben und sie
anwenden.
ES IT PT
Para una utilización segura, será de su
responsabilidad:
leer atentamente todos los documentos que se
incluyen en el CD adjunto antes de la puesta en servicio
del equipo,
instalar, utilizar, efectuar el mantenimiento y reparar
el equipo con arreglo a las recomendaciones de
SAMES KREMLIN y a la normativa nacional y/o local,
cerciorarse de que los usuarios de este equipo han
recibido la formación necesaria, han entendido
perfectamente las normas de seguridad y las aplican.
Per un uso sicuro, vi invitiamo a:
leggere attentamente tutta la documentazione
contenuta nel CD allegato prima della messa in
funzione dell'apparecchio,
installare, utilizzare, mantenere e riparare
l'apparecchio rispettando le raccomandazioni di SAMES
KREMLIN, nonché le normative nazionali e/o locali,
accertarvi che gli utilizzatori dell'apparecchio
abbiano ricevuto adeguata formazione, abbiano
perfettamente compreso le regole di sicurezza e le
applichino.
Para uma utilização segura, é da sua
responsabilidade:
Ler atentamente todos os documentos incluídos no
CD em anexo antes de pör o equipamento em
funcionamento,
Proceder à instalação, utilização, manutenção e
reparação do equipamento de acordo com as
preconizações de SAMES KREMLIN, bem como com
outros regulamentos nacionais e/ou locais aplicáveis,
Assegurar-se que os utilizadores do equipamento
foram devidamente capacitados, compreenderam
perfeitamente e aplicam as devidas regras de
segurança.
NL SE FI
Voor een veilig gebruik dient u:
alle document op de bijgevoegde cd aandachtig te
lezen alvorens het apparaat in werking te stellen,
het apparaat te installeren, gebruiken, onderhouden
en repareren volgens de door SAMES KREMLIN
gegeven aanbevelingen en overeenkomstig de
nationale en/of plaatselijke reglementeringen,
zeker te stellen dat de gebruikers van dit apparaat
zijn opgeleid, de veiligheidsregels perfect hebben
begrepen en dat zij die ook toepassen.
För en säker användning av utrustningen ansvarar ni
för följande:
Läs noga samtliga dokument som finns på den
medföljande cd-skivan innan utrustningen tas i drift.
Installera, använd, underhåll och reparera
utrustningen enligt anvisningarna från SAMES
KREMLIN och enligt nationella och/eller lokala
bestämmelser.
Försäkra er om att användare av denna utrustning
erhållit utbildning, till fullo förstått säkerhetsföreskrifterna
och tillämpar dem.
Käytön turvallisuuden varmistamiseksi
velvollisuutesi on:
Lukea huolella kaikki CD:llä olevat asiakirjat ennen
laitteiston käyttöönottoa,
Noudattaa laitteiston asennuksessa, käytössä,
kunnossapidossa ja huollossa SAMES KREMLIN in
suosituksia sekä kansallisia ja/tai paikallisia
määräyksiä,
Varmistaa, että laitteiston käyttäjät ovat koulutettuja
ja ymmärtävät täysin turvallisuusmääräykset ja miten
niitä sovelletaan.
PL CS SL
Dla zapewnienia bezpiecznego użytkowania na
użytkowniku spoczywa obowiązek:
Uważnego zapoznania się ze wszystkimi
dokumentami znajdującymi się na załączonej płycie CD
przed pierwszym uruchomieniem urządzenia,
Instalowania, użytkowania, konserwacji i naprawy
urządzenia zgodnie z zaleceniami firmy SAMES
KREMLIN oraz z przepisami miejscowymi,
Upewnienia, że wszyscy przeszkoleni użytkownicy
urządzenia zrozumieli zasady bezpieczeństwa i stosują
się do nich.
Pro bezpečné používání jste povinni:
Před uvedením zařízení do provozu si pozorně
přečíst veškeré dokumenty obsažené na přiloženém
CD,
Nainstalovat, používat, udržovat a opravovat
zařízení v souladu s pokyny firmy SAMES KREMLIN
a s národními a/nebo místními legislativními předpisy,
Ujistit se, že uživatelé tohoto zařízení byli vyškoleni,
že dokonale pochopili bezpečnostní pravidla a že je
dodržují.
Za varno uporabo ste dolžni:
natančno prebrati vse dokumente na CD pred
zagonom stroja,
inštalirati, uporabljati, vzdrževati in popravljati
opremo po določilih SAMES KREMLIN in v skladu z
veljavnimi nacionalnimi in/ali lokalnimi predpisi,
poskrbeti, da so uporabniki te opreme ustrezno
usposobljeni, poznajo varnostne predpise in da jih
upoštevajo.
SK HU RO
V záujme bezpečného je vašou povinnosťou:
pozorne si prečítať všetky dokumenty obsiahnuté na
priloženom CD predtým, ako zariadenie uvediete do
prevádzky,
nainštalovať, používať, udržiavať a opravovať
zariadenie v súlade s odporúčaniami spoločnosti
SAMES KREMLIN a národnými a/alebo miestnymi
predpismi,
uistiť sa, že používatelia tohto zariadenia boli
zaškolení, riadne porozumeli pravidlám bezpečnosti a
používajú ich.
A biztonságos használat érdekében az Ön
felelőssége, hogy:
a berendezés üzembe helyezése előtt figyelmesen
elolvassa a mellékelt CD által tartalmazott összes
dokumentumot,
a berendezést a SAMES KREMLIN ajánlasainak
valamint a nemzeti és/vagy helyi szabályozásoknak
megfelelően helyezze üzembe, használja, tartsa karban
és javítsa,
megbizonyosodjon róla, hogy a berendezés
felhasználói képzettek, tökéletesen megértették és
alkalmazzák a biztonsági előírásokat.
Pentru o utilizare sigură, este responsabilitatea dvs.
să:
Citiţi cu atenţie toate documentele de pe CD-ul
anexat, înainte de punerea în funcţiune a
echipamentului,
Instalaţi, utilizaţi, întreţineţi şi reparaţi echipamentul
conform instrucţiunilor SAMES KREMLIN precum şi
reglementărilor naţionale şi/sau locale,
Vă asiguraţi că utilizatorii acestui echipament au
fost instruiţi, au înţeles perfect regulile de securitate şi
le aplică integral.
Déclaration(s) de conformité au verso de ce document / Declaration(s) of conformity at the back of this document / Konformitätserklärung(en) auf der Rückseite dieser Unterlage
/ Declaración (es) de conformidad en el reverso de este documento / Dichiarazione/i di conformità sul retro del presente documento
/ Declaração(ções) de conformidade no verso do documento / Conformiteitsverklaring(en) op de keerzijde van dit document / Försäkran om överensstämmelse på omstående sida
av detta dokument / Vaatimustenmukaisuusvakuutukset tämän asiakirjan kääntöpuolella / Deklaracja(e) zgodności na odwrocie dokumentu
/ Prohlášení o shodě se nachází/nacházejí na zadní straně tohoto dokumentu / Deklaracija(e) o skladnosti na hrbtni strani tega dokumenta / Vyhlásenie/-a o zhode sa nachádzajú na
zadnej strane dokumentu / A dokumentum hátlapján szereplő megfelelőségi nyilatkoz(ok) / Declaraţii de conformitate pe versoul acestui document
SAMES KREMLIN - 2 - N° : 578.008.130-1802
DECLARATION UE DE CONFORMITE
UE DECLARATION OF CONFORMITY
EU- KONFORMITÄTSERKLÄRUNG
DECLARACIÓN UE DE CONFORMIDAD
DICHIARAZIONE DI CONFORMITÀ UE
DECLARAÇÃO UE DE CONFORMIDADE
EU-CONFORMITEITSVERKLARING
EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE
EU- VAATIMUKSENMUKAISUUSVAKUUTUS
DEKLARACJA ZGODNOŚCI UE
EU PROHLÁŠENÍ O SHODĚ
IZJAVA EU O SKLADNOSTI
VYHLÁSENIE O ZHODE
EU-MEGFELELŐSÉGI NYILATKOZAT
DECLARAŢIA DE CONFORMITATE UE
Le fabricant / The manufacturer / Der Hersteller
/ El fabricante / Il produttore / O fabricante
/ De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce
/ Proizvajalec / Výrobca / Gyártó / Fabricantul:
SAMES KREMLIN SAS
13, chemin de Malacher
38 240 - MEYLAN - FRANCE
Tél. : 33 (0)4 76 41 60 60
Déclare que le matériel désigné ci-après / Herewith declares that the equipment / erklärt hiermit, dass die / Declara que el material designado a
continuación / Dichiara che il materiale sottoindicato / Declara que o material a seguir designado / verklaart dat de hieronder aangeduide apparatuur
/ Kungör att den utrustning som anges här nedan / ilmoittaa, että alla mainitut laitteistot / Oświadcza, że wymienione poniżej urządzenia / Prohlašuje,
že níže uvedené vybavení / Izjavlja, da je opisana oprema spodaj / Vyhlasuje, že zariadenie uvedené nižšie / Kijelenti, hogy a megjelölt anyag a
továbbiakban / Declară că echipamentul precizat mai jos:
PISTOLETS AUTOMATIQUES DE PULVERISATION PNEUMATIQUES / AIRSPRAY AUTOMATIC SPRAYING GUNS
/ AUTOMATIK LUFTSPRITZPISTOLEN / PISTOLAS AUTOMÁTICAS DE PULVERIZACIÓN NEUMÁTICAS
A 25
A 25 F
A 26
A 28
A 29
A 35
A 3
Est conforme à la législation d’harmonisation de l’Union applicable suivante / Is in conformity with the relevant Union harmonisation legislation / Erfüllt
die einschlägigen Harmonisierungsrechtsvorschriften der Union / es conforme con la legislación de armonización pertinente de la Unión / è conforme
alla pertinente normativa di armonizzazione dell’Unione / in overeenstemming met de desbetteffende harmonisatiewetgeving van de Unie / med den
relevanta harmoniserade unionslagstiftningen / on asiaa koskevan unionin yhdenmukaistamislainsäädännön vaatimusten mukainen / jest zgodny z
odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego / Shoduje se s následující příslušnou evropskou harmonizační legislativou
/ V skladu s harmonizirano zakonodajo Unije / Je v súlade s uplatniteľnými harmonizačnými právnymi predpismi EÚ / Megfelel a következő
alkalmazandó uniós harmonizációs szabályozásnak / Este conform cu legislaţia aplicabilă de armonizare de mai jos
Directive ATEX / ATEX Directive / ATEX Richtlinie / Directiva ATEX / Direttiva ATEX / Diretiva ATEX
/ ATEX-Richtijn / ATEX-direktivet / ATEX-direktivi / Dyrektywa ATEX / Směrnice ATEX / Direktiva ATEX / Smernica ATEX
/ ATEX-irányelv 2014/34/UE
II 2G IIA T6
SAMES KREMLIN - 3 - N° : 578.008.130-1802
La présente déclaration de conformité est établie sous la seule responsabilité du fabricant / This declaration of conformity is issued under the sole
responsibility of the manufacturer / Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller / La presente
declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante / La presente dichiarazione di conformità è rilasciata sotto la
responsabilità esclusiva del fabbricante / A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante / Deze
conformiteitsverklaring wordt verstrekt onder volledige verantwoordelijkheid van de fabrikant / Denna försäkran om överensstämmelse utfärdas på
tillverkarens eget ansvar / Tämä vaatimustenmukaisuusvakuutus on annettu valmistajan yksinomaisella vastuulla / Niniejsza deklaracja zgodności
wydana zostaje na wyłączną odpowiedzianość producenta / Toto prohláŝení o skodě se vydává na výhradní odpovědnost výrobce / Za izdajo te izjave
o skladnosti je odgovoren izključno proizvajalec / Toto vyhlásenie o zhode sa vydáva / na vlastnú zodpovednosť výrobcu / Ezt a megfelelőségi
nylatkozatot a gyártó kizárólagos felelőssége mellett adják ti / Prezenta declaraţie de conformitate este emisă pe răspunderea exclusivă a
producătorului.
Philippe PROVENAZ
Directeur Innovation & Développement / Innovation & Development
Director / Direktor für Innovation & Entwicklung / Director de
Inovación y Desarrollo / Direttore Innovazione e sviluppo
/ Diretor de Inovação / Manager Innovatie en Ontwikkeling / Direktör
för Forskning och Utveckling / Innovaatio- ja kehitysjohtaja
/ Dyrektor ds. Innowacji I Rozwoju / Ředitel pro inovace a vývoj
/ Direktor za inovacije in razvoj / Riaditeľ pre inováciu a rozvoj
/ Innovációs és fejlesztési igazgató / Director Inovaţie şi Dezvoltare
Fait à Meylan, le / Established in Meylan, on / Geschehen zu Meylan, am / En Meylan, a / Redatto a Meylan, / Vastgesteld te Meylan, / Utformat i
Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, / Întocmită la Meylan,
pe data de 15/02/2018 - 02/15/2018
SAMES KREMLIN N° : 578.001.130-UK-1804
INSTALLATION AND SAFETY
INSTRUCTIONS
TRANSLATION FROM THE ORIGINAL MANUAL
IMPORTANT : Before assembly and start-up, please read and clearly understand all the
documents relating to this equipment (professional use only).
THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT
PRIOR NOTICE.
SAMES KREMLIN SAS
l
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
SAMES KREMLIN - 1 - N° : 578.001.130-UK-1804
1. SAFETY INSTRUCTIONS
GENERAL SAFETY INSTRUCTIONS
CAUTION : Th
e equipment can be dangerous if you do not follow our
instructions concerning installation and servicing described in this manual
and in accordance with applicable European standards and local national safety
regulations.
Please carefully read all the
instruction literature before operating your
equipment.
Only trained operators can use the equipment.
The foreman must ensure that the operator has understood the safety instructions for this equipment as
well as the instructions in the manuals for the different parts and accessories.
Read carefully all instruction manuals, label markings before operating the equipment.
Incorrect use may result in injury. This equipment is for professional use only. It must be used only for
what it has been designed for. Never modify the equipment. The parts and accessories supplied must be
regularly inspected. Defective or worn parts must be replaced.
Guards (motor cover, coupling shields, connectors,…) have been designed for a
safe use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure and / or
property damage due to destruction, the overshadowing or the partial or total
removal of the guards.
Never exceed the equipment components' maximum working pressure.
Comply with regulations concerning safety, fire risks, electrical regulations in force in the country of final
destination of the material. Use only products or solvent compatible with the parts in contact with the
material (refer to data sheet of the material manufacturer).
PICTOGRAMS
A
D
F
E
G
NIP HAZARD WARNING
MOVING
ELEVATOR
WARNING
MOVING PARTS
WARNING
MOVING SHOVEL
DO NOT
EXCEED THIS
PRESSURE
HIGH
PRESSURE
HAZARD
H
J
L
K
M
RELIEF OR
DRAIN VALVE
WARNING
HOSE UNDER
PRESSURE
WEAR GLASSES
OBLIGATORY
WEAR OF
GLOVES IS
OBLIGATORY
PRODUCT
VAPOR
HAZARDS
WARNING
HOT PARTS OR
AREAS
N
P
R
ELECTRICAL
HAZARD
WARNING
FIRE HAZARDS
EXPLOSION
HAZARDS
GROUNDING WARNING
(USER)
WARNING
SERIOUS
INJURIES
SAMES KREMLIN - 2 - N° : 578.001.130-UK-1804
PRESSURE HAZARDS
Current legislation requires that an air relief valve be fitted in the air supply circuit to the air
motor to prevent over pressurisation. This safety feature,ensures that it is not possible to supply
the air motor with excessive air pressure that may cause injury.
Please ensure that a material drain valve is fitted in the fluid circuit to drain and depressurise the
circuit. Once depressurised and drained, work /servicing may then commence on the equipment
Please remember to close these valves when restarting the system.
HIGH PRESSURE INJECTION HAZARDS
When working with high pressure equipment, special care is required. Fluid leaks can occur.
There is a risk of material being injected to any exposed parts of body, this could cause severe
injury :
• medical care must be sought immediately if paint is injected under the skin or in other
parts of the body (eyes, fingers).
• never point the spray gun at any one. Never try to stop the spray with your hands or fingers
nor with rags or similars.
• follow the shut down procedure and always depressurize air and fluid circuits before
carrying out any servicing on the gun (cleaning, checking, maintenance of the material or
cleaning of the gun nozzles).
• for the guns equipped with a safety device, always lock the trigger when not in use.
FIRE - EXPLOSION - SPARKS - STATIC ELECTRICITY HAZARDS
A poor earth connection, inadequate ventilation, sparks or static electricity can cause an
explosion or fire. to avoid these risks when using or servicing SAMES KREMLIN equipment, the
following safety procedures must be followed :
• ensure a good earth connection and ground the parts to be handled i.e. solvents, materials,
components and equipment,
• ensure adequate ventilation,
• keep working area clean and free from waste solvents, chemicals, or solid waste i.e. rags,
paper and empty chemicals drums,
• never use electrical switches / power if in an atmosphere of volatile solvent vapour,
• stop working immediately in case of electrical arcs,
• never store chemicals and solvents in the working area.
• use paint whose flash point is the highest possible to prevent from any formation of gas
and inflammable vapours (refer to materials' safety instructions),
• install a cover on the drums to reduce the diffusion of gas and vapours in the spraybooth.
TOXIC PRODUCT HAZARDS
Toxic products or vapours can cause severe injury not only though contact with the body, but also
if the products are ingested or inhaled. It is imperative :
• to know the material products and their risks,
• notified or hazardous materials must be stored in accordance with the regulations,
• the material must be stored in an appropriate container, never place materials in a
container where there is a risk of spillage or leakage,
• a procedure must be applied for the safe disposal of waste material. It must comply with all
prevailing regulations and legislations of the country where the equipment is to be used,
• protective clothing should always be worn in compliance with the material manufacturers'
recommendations,
• depending on the application and chemical safety instructions, safety glasses, hearing
protective earplug, gloves, foot wear, protective masks and possible breathing equipment
should be worn to comply with the regulations (Refer to chapter "Safety equipment of
SAMES KREMLIN selection guide).
SAMES KREMLIN - 3 - N° : 578.001.130-UK-1804
CAUTION!
It is forbidden to use material containing high concentrations of halogenated hydrocarbon
solvents with aluminium or zinc fillers .Non-compliance with the instructions may cause
explosion risk causing serious or fatal injury.
EQUIPMENT REQUIREMENTS
Guards (motor cover, coupling shields, connectors,…) have been designed for
a safe use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure
and / or property damage due to destruction, the overshadowing or the
partial or total removal of the guards.
PUMP
Before carrying out any work, it is imperative to read and clearly understand the disassembly and
reassembly instructions before servicing. The operator must understand the equipment and the
safety instructions. These instructions are available in the equipment manuals.
The air motor is designed to be mounted with a pump. Never modify any components or
couplings. When operating, please keep hands away from moving parts. Before starting up the
equipment, please read the PRESSURE RELIEF instructions. Please ensure that any relief or
drain valves fitted are in good working order.
HOSES
• Keep hoses out of circulation areas, moving parts or hot surfaces,
• Never expose product hoses to temperature higher than + 60°C / 140° F or lower than 0°C
/ 32° F,
• Never pull or use the hoses to move the equipment,
• Tighten all fittings as well as the hoses before operating the equipment,
• Check the hoses regularly; change them if they are damaged,
• Never exceed the maximum working pressure (MWP) indicated on the hose.
USED PRODUCTS
Considering the wide variety of products that are available and can be used in our equipment it is
impossible to check and make recommendations for all chemical data,regarding the risks of
possible chemical attack and their long term chemical reaction
SAMES KREMLIN can not be held liable for :
• compatibility of wetted parts,
• risks to staff and the surroundings,
• for worn or defective parts, for faulty equipment or units, or the qualitiy of final product.
It is the responsibility of the user to know and prevent any possible risks such as toxic vapours,
fires or explosions. He shall determine the risks of immediate reactions or pursuant to repeated
exposures of the staff,
SAMES KREMLIN shall not be liable for physical injuries, direct or indirect material damages
caused by the use of chemicals.
SAMES KREMLIN - 4 - N° : 578.001.130-UK-1804
2. HANDLING
Check the weight and the dimensions of the equipment
(
refer to 'Technical features' section of the instruction manual
If weight and dimensions are too important, the unloading must be carried out by means of a forklift or
any other appropriate means with a qualified personnal and in a clear horizontal area to prevent from
risks of damage injury or an accident.
The centre of gravity is not in the centre of the machine : carry out by hand a stability-test after having
lifted the whole at 10 cm / 3.937" maximum.
After the unloading, the handling of the whole (eg: elevator pump) is carried out by means of a pallet
truck taking the bottom part of the frame.
Remark : Each pump motor is fitted with a ring. The ring is designed for the hoisting of one
pump and can not be used for the handling of the complete assembly.
3. STORING
Storing before installation :
- Storing ambient temperature : 0 / +50 °C / 0 / +122°F
- Protect the whole against dust, water trickling, dampness and shocks.
Storing after installation :
- Operating temperature : +15 / +35 °C / +59 / +138.2° F
- Protect the whole against dust, water tricling, dampness and shocks.
4. INSTALLATION OF THE EQUIPMENT
The machine is installed on a stable horizontal floor (for eg a concrete flag).
The machine shall be made stable by the use of holding down bolts or by the use of other anchoring
methods, strong enough to prevent unintended bodily movement of the equipment.
To avoid risks caused by static electricity, the equipment as well as its components must
be grounded.
• For the pumping equipments (pumps, pneumatic rams, frame…), a section wire of 2.5
mm² is fixed on the material. Use this wire to connect the material to “the general ground”.
In case of severe environments (mechanical protection of the wire of earthing insufficient,
vibrations, mobile material…) where function damages at the ground are probable, the user
have to replace the provided wire of 2.5 mm² by a device more adapted to its environment
(wire with a more important section, bonding strip, fixing by thimble with eyelet…).
The continuity of the ground must be controlled by a qualified electrician. If the continuity of
the ground is not ensured, check the terminal, the wire and the earthing point. Never use the
material without have solved this problem.
• In the severe cases of environments (mechanical protection of the wire of earthing
insufficient, vibrations, mobile material…) where damages of the function put at the ground
are probable, the user will have to replace the wire of 2.5 mm² provided, by a device more
adapted to its environment (wire of more important section, bonding strip, fixing by thimble
with eyelet…),
• The gun must be 'grounded' via a material hose or an air hose. In case of spraying by
means of a gun with cup, the air hose must be conductive,
• The materials to be painted must also be grounded.
All the materials situated in the working area shall be grounded.
SAMES KREMLIN - 5 - N° : 578.001.130-UK-1804
• Never store more than necessary inflammable materials inside the working area,
• The materials must be stored into approved drums and grounded,
• Use only grounded metals containers for the use of cleaning solvents,
• Cardboard and paper are prohibited.
5. MARKING OF THE EQUIPMENT
Each equipment has a label plate with the name of the manufacturer, the equipment part number,
the interesting informations to use correctly the equipment (pressure, voltage,…) and sometimes
the above pictogram.
The equipment is designed with and consists of high quality materials and components which can
be re-used.
The 2012/19/UE European Directive covers all equipments with a crossed-out bin pictogram.
Please inform yourself about the collection systems for electric and electronic equipments.
Please act in accordance with local rules and do not dispose of old equipment with household
wastes. A correct disposal of old equipment will help prevent negative consequences for the
environment and health.
SAMES KREMLIN N° : 578.049.110-UK-1712
AUTOMATIC AIRSPRAY
GUN
A 25 - A 26
Disassembly / Reassembly
TRANSLATION FROM THE ORIGINAL MANUAL
IMPORTANT : Before assembly and start-up, please read and clearly understand all the
documents relating to the equipment (professional use only).
THE PICTURES AND DRAWINGS ARE NOT CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT
PRIOR NOTICE.
SAMES KREMLIN SAS
l
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
SAMES KREMLIN - 1 - N° : 578.049.110-UK-1712
CAUTION :
Before any intervention on the gun, shut off the compressed air supply and
depressurize the circuits controlling the opening of the gun.
The gun is manufactured under the ATEX agreement and can not be modified.
SAMES KREMLIN will not be held responsible for any failure to comply with that
instruction.
Index Instructions Description Part number
A 1 PTFE grease "TECHNILUB" grease
(10 ml) 560.440.101
A 2 Anti-seize grease Graphite grease box
(450 g / 1 lb) 560.420.005
C 1 Medium strength
Anaerobic Pipe sealant
Loctite 577 (250 ml) 544.180.015
S 1 Screwing torque
A 25, A 25 LP :
18 Nm / 13.28 ft/lbs
A 25 HTi, A 26 HTi :
12 Nm / 8.8 ft/lbs
S 1
A 1
A 1
A 1
A 1
A 2
SAMES KREMLIN - 2 - N° : 578.049.110-UK-1712
Before removing a component of the gun, some precautions have to be respected :
- Empty out the paint inside the cup or the receiver.
- Fill the cup or the receiver with cleaning solvent.
- Decrease the supply air pressure of the gun.
- Spray the solvent until it runs clear.
- Shut off the supply air pressure of the gun.
- Trigger the gun to depressurize the circuit.
- Empty out the solvent when using a gravity cup.
- Remove the part to be cleaned or changed.
Before reassemblying the different components, some precautions must be taken :
- Clean all the parts with the appropriate cleaning solvent and a brush.
- Install new seals if it is necessary after having lubricated them with PTFE grease.
- Install new parts if it is necessary.
CHANGING THE SPRAY GUN
Shut off the air and product feeds to the gun.
Depressurize the circuits.
Remove the 4 screws (27).
Take out the gun.
Fit the replacement gun and change the seals (28 and 29).
Re-fit the 4 screws (27).
CARTRIDGE AND NEEDLE
Unscrew the cylinder (22) - (paying attention to the springs (20 and 21).
Hold the entire needle and piston assembly (10 and 16) and pull it towards the back.
Remove the aircap (1) and the nozzle (6).
Loosen the screw (25) by two turns (fluid leakage detector).
Insert one of the screws (27) at the back in place of the needle and push or tap it until the cartridge
(13) comes out at the front.
Clean everything well with solvent and then blow it out with air.
Push in the new cartridge from the front.
IMPORTANT : with the head of the screw (27), push the cartridge to the back. Tap it
lightly if necessary.
Re-tighten the fluid leakage detector (25).
Re-fit the needle and piston assembly (10 and 16).
Fit the springs (20 and 21).
Screw on the cylinder (22).
Re-fit the nozzle (6) and the aircap (1), having unscrewed the needle adjustment knob (23).
Doc. 573.316.050
Date/Datum/Fecha : 20/02/18
Annule/Cancels/Ersetzt/Anula :
17/07/13
Modif. / Änderung :
Mise à jour / Update / Aktualisierung
/ Actualización
Pièces de rechange
Spare parts list
Ersatzteilliste
Piezas de repuesto
PISTOLET AUTOMATIQUE A 26 HTi INOX
(SANS EMBASE) A 26 HTi AUTOMATIC SPRAY GUN
(WITHOUT BASE) - STAINLESS STEEL
AUTOMATIKPISTOLE A 26 HTi
EDELSTAHL (OHNE GRUNDPLATTE) PISTOLA AUTOMÁTICA A 26 HTi INOX
(SIN BASE)
5a
3
SAMES KREMLIN 2 Doc. / Dok. : 573.316.050
PISTOLET A 26 HTi INOX SANS EMBASE / A 26 HTi SPRAY GUN WITHOUT BASE
PISTOLE A 26 HTi EDELSTAHL OHNE GRUNDPLATTE / PISTOLA A 26 HTi INOX SIN BASE
A 26 HTi #
sans projecteur / without projector
/ ohne Zerstäubereinheit / sin proyector NC / NS
+ 07 H 3 KHVLP NC / NS
+ 09 H 3 KHVLP NC / NS
Projecteur / Projector
/ Zerstäubereinheiten
/ Proyector
Tête / Aircap
Luftkappe / Cabezal Buse / Nozzle
Düse / Boquilla Pointeau / Needle
Nadel / Aguja
Ind. 1+6+10 # Ind. 1 # Ind. 6 Ø (mm / ") # Ind. 10 #
07 H 3 KHVLP 031 268 006 H 7 0,7 / 0.027 134 080 100
09 H 3 KHVLP 031 268 007 H 3 KHVLP 132 120 100 H 9 0,9 / 0.035 134 080 200 07 - 09 - 12 033 251 100
12 H 3 KHVLP 031 268 008 H 12 1,2 / 0.047 134 080 300
PIECES DE RECHANGE - PARTS IDENTIFICATION LIST - ERSATZTEILLISTE - PIEZAS DE REPUESTO
Ind # Désignation Description Bezeichnung Denominación Qté
*1 - Tête complète
(voir tableau) Aircap assembly
(refer to chart) Zerstäuberkopf kpl.
(siehe Tabelle) Cabezal completo
(consultar cuadro) 1
2 032 020 001 Bague de tête Aircap ring Überwurfring Anillo del cabezal 1
3 150 040 309 Joint de bague (les 10) Seal, ring (pack of 10) O-Ring (10 St.) Junta del anillo (x 10) 1
4 NC / NS Tête nue Aircap only Luftkappe Cabezal solo 1
5 032 200 103 Anneau de retenue Retaining ring Sicherungsring Aniilo de retención 1
5a 129 080 007 Joint de tête (les 2) Seal, aircap (pack of 2) O-Ring (2 St.) Junta del cabezal (x2) 1
*6 - Buse équipée
(voir tableau) Nozzle assembly
(refer to chart) Düse kpl.
(siehe Tabelle) Boquilla equipada
(consultar cuadro) 1
7 134 056 102 Bague de répartition
(les 10) Distribution ring
(pack of 10) Luftverteilerring (10 St.) Anillo de distribución
(bolsa de 10) 1
8 NC / NS Buse Nozzle Düse Boquilla 1
9 129 209 902 Joint de buse (les 5) Seal, nozzle (pack of 5) O-Ring, Düse (5 St.) Junta de boquilla (x 5) 1
*10 - Pointeau complet
(voir tableau) Needle assembly
(refer to chart) Farbnadel kpl.
(siehe Tabelle) Aguja completa
(consultar cuadro) 1
11 NC / NS Pointeau Needle only Farbnadel Aguja 1
12 129 400 915 Joint (les 10) Seal (pack of 10) O-Ring (10 St.) Junta (x 10) 1
*13 129 251 100 Cartouche complète Cartridge assembly Nadelpackung, kpl. Cartucho completo 1
14 NC / NS Cartouche Cartridge Nadelpackung Cartucho 1
15 129 529 906 Joint FPM (les 10) Seal, FPM (x 10) O-Ring, FPM (10 St.) Junta FPM (x 10) 2
*16 129 251 200 Piston équipé Piston assembly Kolben, kpl. Pistón equipado 1
17 129 251 992 Joint R8 (les 10) Seal, R8 (pack of 10) O-Ring, R8 (10 St.) Junta R8 (bolsa de 10) 1
18 NC / NS Piston seul Piston only Kolben, allein Pistón solo 1
19 129 251 993 Joint R22 (les 10) Seal, R22 (pack of 10) O-Ring, R22 (10 St.) Junta R22 (bolsa de 10) 1
SAMES KREMLIN 3 Doc. / Dok. : 573.316.050
Ind # Désignation Description Bezeichnung Denominación Qté
*20 050 315 203 Ressort de pointeau Spring, needle Feder für Farbnadel Muelle de aguja 1
*21 050 313 504 Ressort de piston Spring, piston Feder für Kolben Muelle de pistón 1
22 029 251 401 Cylindre Cylinder Luftzylinder Cilindro 1
23 129 251 750 Butée de pointeau
complète Adjustment knob
assembly Nadelanschlag, komplett Tope de aguja completo 1
24 129 269 010 Corps Body Pistolenkörper Cuerpo 1
25 029 266 002 Témoin de fuite Detector, fluid leakage Leckageanzeige Testigo de fuga 1
26 129 529 903 Joint (les 10) Seal (x 10) Dichtung (10 St.) Junta (bolsa de 10) 1
27 930 151 548 Vis CHc M 6 x 50 Screw, CHc M 6 x 50 Schraube M 6 x 50 Tornillo CHc M 6 x 50 4
28 129 525 092 Joint (les 10) Seal (x 10) Dichtung (10 St.) Junta (bolsa de 10) 1
29 129 251 991 Joint (les 10) Seal (x 10) Dichtung (10 St.) Junta (bolsa de 10) 5
30 029 267 201 Joint d'embase Seal, base Flachdichtung,
Grundplatte Junta de base 1
A LA DEMANDE - ON REQUEST - AUF WUNSCH - A PETICIÓN
Ind. 41
EMBASE INOX EQUIPEE / STAINLESS STEEL BASE ASSEMBLY
GRUNDPLATTE EDELSTAHL, KOMPLETT / BASE INOX EQUIPADA (ind. 40) #
129.267.050
Ind # Désignation Description Bezeichnung Denominación Qté
41 NC / NS Embase Base Grundplatte Base 1
42 NC / NS Insert inox Stainless steel insert Edelstahl Einsatz Inserto inox 1
43 933.151.221 Vis CHc M 5 x 16 Screw, CHc M 5 x 16 Schraube CHc M 5 x 16 Tornillo CHc M 5 x 16 2
*44 129 267 300 Pointeau d'air Fan air control Spritzstrahlregulier-
schraube Aguja control de abanico 2
*45 102 202 101 Circlips 5 (les 10) Ring, 5 (pack of 10) Sicherungsring 5
(10 St.) Anillo truarc 5
(bolsa de 10) 1
46 129 400 915 Joint (les 10) Seal (x 10) Dichtung (10 St.) Junta (x 10) 1
47 905 124 901 Raccord (commande)
M 1/8 BSP - T 4 x 6 Quick disconnect
(control)
M 1/8 BSP - T 4 x 6
Steckanschluss für
Schlauch (Steuerung)
AG 1/8 BSP - T 4 x 6
Racor (aire de mando)
M 1/8 BSP - T 4 x 6 1
48 050 102 624 Raccord (air)
M 1/4 BSP - M 1/4 NPS Fitting (air), double male,
1/4 BSP - 1/4 NPS Doppelnippel (Luft)
AG 1/4 BSP - AG 1/4
NPS
Racor (aire)
M 1/4 BSP - M 1/4 NPS 1
49 905 190 401 Raccord coudé (produit)
M 1/4 BSP - T 6 x 8 Elbow fitting (fluid)
M 1/4 BSP - T 6 x 8 Winkelnnippel
AG 1/4 BSP - T 6 x 8 Racor acodado
(producto)
M 1/4 BSP - T 4 x 6
2
- 906 333 102 Bouchon 1/4 G Plug, 1/4 G Blindstopfen, 1/4 G Tapón, 1/4 G 1
SAMES KREMLIN 4 Doc. / Dok. : 573.316.050
Ind. 50 Ind. 51
Ind # Désignation Description Bezeichnung Denominación Qté
50 049 030 021 Clé plate Gun wrench Pistolenschlüssel Llave para pistola 1
51 906 300 101 Goupillon Large size brush Pistolenreinigungsbürste Cepillo grande 1
POCHETTES - KITS - SÄTZE - BOLSAS
Ind # Désignation Description Bezeichnung Denominación Qté
*129 267 090 Pochette de joints
(ind. 9, 12, 15, 17, 19,
26, 28, 29, 30, 46)
Package of seals
(ind. 9, 12, 15, 17, 19,
26, 28, 29, 30, 46)
Dichtungssatz
(Pos. 9, 12, 15, 17, 19,
26, 28, 29, 30, 46)
Kit de juntas
"reparación"
(índ. 9, 12, 15, 17, 19,
26, 28, 29, 30, 46)
1
* Pièces de maintenance préconisées.
* Preceding the index number denotes a suggested spare part.
* Bezeichnete Teile sind empfohlene Ersatzteile.
* Piezas de mantenimiento preventivas.
N C : Non commercialisé.
N S : Denotes parts are not serviceable separately.
N S : bezeichnete Teile gibt es nicht einzeln, sondern nur
komplett.
N C : no suministrado.
ACCESSOIRES - ACCESSORIES - ZUBEHÖR - ACCESORIOS
Ind. 60 Ind. 61
Ind # Désignation Description Bezeichnung Denominación Qté
- 029 417 019 Kit pour commande air à
distance Remote fan width
adjustor Kit für Spritzstrahl-
Fernverstellung Kit para mando aire a
distancia 1
60 049 351 000 Support de fixation pour
pistolet (16
longueur : 100 mm)
Gun mounting support
(16 / 5/8"
Length : 100 mm / 4 " )
Pistolenhalterung
(16 - Länge: 100 mm) Soporte de fijación para
pistola (16
longitud : 100 mm)
1
61 129 251 500 Butée de pointeau avec
indexage Indexed needle adjust kit Indexiertes
Nadeleinstellset Kit de regulación
indexado para el botón
aguja
1
62 NC / NS Tête de contrôle
H 3 KHVLP avec
manomètres
H 3 KHVLP test aircap
with gauges H 3 KHVLP - Luftdruck
Kontrollset mit Luftkappe
und Manometer
Cabezal de control
H 3 KHVLP con
manómetros
1
SAMES KREMLIN 5 Doc. / Dok. : 573.316.050
# Désignation Description Bezeichnung Denominación
Tuyau air Ø 8
(Raccord F 1/4 NPS) Air hose Ø 8
(Fitting, F 1/4 NPS) Luftschlauch Ø 8
(Anschluss IG 1/4 NPS) Tubería aire Ø 8
(Racor, H 1/4 NPS)
050 389 101 Longueur 5 m Length : 5 m / 16.4 ft Länge: 5 m 5 m de largo
050 389 103 Longueur 7,5 m Length : 7.5 m / 24.6 ft Länge: 7,5 m 7,5 m de largo
050 389 102 Longueur 10 m Length : 10 m / 32.8 ft Länge: 10 m 10 m de largo
SAMES KREMLIN N° : 578.052.110-UK-1712
AUTOMATIC AIRSPRAY GUN
PREVENTIVE MAINTENANCE
TRANSLATION FROM THE ORIGINAL MANUAL
IMPORTANT : Before assembly and start-up, please read and clearly understand all the
documents relating to this equipment (professional use only).
THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT
PRIOR NOTICE.
SAMES KREMLIN SAS
l
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
SAMES KREMLIN - 1 - N° : 578.052.110-UK-1712
The gun is a precision instrument and it relies on good and frequent maintenance for its correct operation.
If stopped for a long time, lubricate all movable parts, axes and springs with grease.
Never use metal brushes files, points or clips for dismantling.
SHORT DURATION SHUTDOWN
Remove the paint on the air cap, with a brush and solvent. Otherwise, leave the equipment as it is.
Removing the paint will prevent the drying and clogging of the holes.
LONG DURATION SHUTDOWN
Shut off the gun fluid and air supply.
Depressurize the hoses by triggering the gun or by controlling the gun opening.
Unscrew the air cap. Remove the needle and then remove the fluid nozzle with the wrench provided.
Soak the needle, aircap, fluid nozzle in solvent and brush them carefully, as they are precision parts.
With a brush soaked in solvent, clean the internal parts of the gun. Wash carefully brush the
threated parts.
Flush the gun.
Do not soak the gun in solvent
Pagina se încarcă...
Pagina se încarcă...
Pagina se încarcă...
Pagina se încarcă...
Pagina se încarcă...
Pagina se încarcă...
Pagina se încarcă...
Pagina se încarcă...
Pagina se încarcă...
Pagina se încarcă...
Pagina se încarcă...
Pagina se încarcă...
Pagina se încarcă...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

Sames A 26 Manual de utilizare

Sames
Marca
Sames
Model
A 26
Categorie
Pulverizator de vopsea
Tip
Manual de utilizare
Descărcați PDF
raport

în alte limbi

Lucrări înrudite