Sames REGULEX 7 - 27 - 47 - 107CC Manual de utilizare

Tip
Manual de utilizare
DOCUMENTATION
REGULEX® PROPORTIONING GUN
7, 27, 47 & 107 CC
Manual : 582.232.110-UK - 2207
Date : 25/07/22
Supersede :
Modif.:
TRANSLATION FROM THE ORIGINAL MANUAL
IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents relating
to this equipment (professional use only).
THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.
SAMES KREMLIN SAS
l
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
SAMES KREMLIN N° : 578.001.130-UK-1804
INSTALLATION AND SAFETY
INSTRUCTIONS
TRANSLATION FROM THE ORIGINAL MANUAL
IMPORTANT : Before assembly and start-up, please read and clearly understand all the
documents relating to this equipment (professional use only).
THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT
PRIOR NOTICE.
SAMES KREMLIN SAS
l
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
SAMES KREMLIN - 1 - : 578.001.130-UK-1804
1. SAFETY INSTRUCTIONS
GENERAL SAFETY INSTRUCTIONS
CAUTION : Th
e equipment can be dangerous if you do not follow our
instructions concerning installation and servicing described in this manual
and in accordance with applicable European standards and local national
safety regulations.
Please carefully read all the instruction literature before operating your
equipment.
Only trained operators can use the equipment.
The foreman must ensure that the operator has understood the safety instructions for this equipment
as well as the instructions in the manuals for the different parts and accessories.
Read carefully all instruction manuals, label markings before operating the equipment.
Incorrect use may result in injury. This equipment is for professional use only. It must be used only for
what it has been designed for. Never modify the equipment. The parts and accessories supplied must
be regularly inspected. Defective or worn parts must be replaced.
Guards (motor cover, coupling shields, connectors,…) have been designed for
a safe use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure and / or
property damage due to destruction, the overshadowing or the partial or total
removal of the guards.
Never exceed the equipment components' maximum working pressure.
Comply with regulations concerning safety, fire risks, electrical regulations in force in the country of
final destination of the material. Use only products or solvent compatible with the parts in contact with
the material (refer to data sheet of the material manufacturer).
PICTOGRAMS
A
D
F
E
G
NIP HAZARD WARNING
MOVING
ELEVATOR
WARNING
MOVING PARTS
WARNING
MOVING SHOVEL
DO NOT
EXCEED THIS
PRESSURE
HIGH
PRESSURE
HAZARD
H
J
L
K
M
RELIEF OR
DRAIN VALVE
WARNING
HOSE UNDER
PRESSURE
WEAR GLASSES
OBLIGATORY
WEAR OF
GLOVES IS
OBLIGATORY
PRODUCT
VAPOR
HAZARDS
WARNING
HOT PARTS OR
AREAS
N
P
R
ELECTRICAL
HAZARD
WARNING
FIRE HAZARDS
EXPLOSION
HAZARDS
GROUNDING WARNING
(USER)
WARNING
SERIOUS
INJURIES
PRESSURE HAZARDS
Current legislation requires that an air relief valve be fitted in the air supply circuit to the air
motor to prevent over pressurisation. This safety feature,ensures that it is not possible to supply
the air motor with excessive air pressure that may cause injury.
SAMES KREMLIN - 2 - : 578.001.130-UK-1804
Please ensure that a material drain valve is fitted in the fluid circuit to drain and depressurise the
circuit. Once depressurised and drained, work /servicing may then commence on the equipment
Please remember to close these valves when restarting the system.
HIGH PRESSURE INJECTION HAZARDS
When working with high pressure equipment, special care is required. Fluid leaks can occur.
There is a risk of material being injected to any exposed parts of body, this could cause severe
injury :
medical care must be sought immediately if paint is injected under the skin or in other
parts of the body (eyes, fingers).
never point the spray gun at any one. Never try to stop the spray with your hands or fingers
nor with rags or similars.
follow the shut down procedure and always depressurize air and fluid circuits before
carrying out any servicing on the gun (cleaning, checking, maintenance of the material or
cleaning of the gun nozzles).
for the guns equipped with a safety device, always lock the trigger when not in use.
FIRE - EXPLOSION - SPARKS - STATIC ELECTRICITY HAZARDS
A poor earth connection, inadequate ventilation, sparks or static electricity can cause an
explosion or fire. to avoid these risks when using or servicing SAMES KREMLIN equipment, the
following safety procedures must be followed :
ensure a good earth connection and ground the parts to be handled i.e. solvents, materials,
components and equipment,
ensure adequate ventilation,
keep working area clean and free from waste solvents, chemicals, or solid waste i.e. rags,
paper and empty chemicals drums,
never use electrical switches / power if in an atmosphere of volatile solvent vapour,
stop working immediately in case of electrical arcs,
never store chemicals and solvents in the working area.
use paint whose flash point is the highest possible to prevent from any formation of gas
and inflammable vapours (refer to materials' safety instructions),
install a cover on the drums to reduce the diffusion of gas and vapours in the spraybooth.
TOXIC PRODUCT HAZARDS
Toxic products or vapours can cause severe injury not only though contact with the body, but also
if the products are ingested or inhaled. It is imperative :
to know the material products and their risks,
notified or hazardous materials must be stored in accordance with the regulations,
the material must be stored in an appropriate container, never place materials in a
container where there is a risk of spillage or leakage,
a procedure must be applied for the safe disposal of waste material. It must comply with all
prevailing regulations and legislations of the country where the equipment is to be used,
protective clothing should always be worn in compliance with the material manufacturers'
recommendations,
depending on the application and chemical safety instructions, safety glasses, hearing
protective earplug, gloves, foot wear, protective masks and possible breathing equipment
should be worn to comply with the regulations (Refer to chapter "Safety equipment of
SAMES KREMLIN selection guide).
SAMES KREMLIN - 3 - : 578.001.130-UK-1804
CAUTION!
It is forbidden to use material containing high concentrations of halogenated hydrocarbon
solvents with aluminium or zinc fillers .Non-compliance with the instructions may cause
explosion risk causing serious or fatal injury.
EQUIPMENT REQUIREMENTS
Guards (motor cover, coupling shields, connectors,…) have been designed for
a safe use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure
and / or property damage due to destruction, the overshadowing or the
partial or total removal of the guards.
PUMP
Before carrying out any work, it is imperative to read and clearly understand the disassembly and
reassembly instructions before servicing. The operator must understand the equipment and the
safety instructions. These instructions are available in the equipment manuals.
The air motor is designed to be mounted with a pump. Never modify any components or
couplings. When operating, please keep hands away from moving parts. Before starting up the
equipment, please read the PRESSURE RELIEF instructions. Please ensure that any relief or
drain valves fitted are in good working order.
HOSES
Keep hoses out of circulation areas, moving parts or hot surfaces,
Never expose product hoses to temperature higher than + 60°C / 140° F or lower than 0°C
/ 32° F,
Never pull or use the hoses to move the equipment,
Tighten all fittings as well as the hoses before operating the equipment,
Check the hoses regularly; change them if they are damaged,
Never exceed the maximum working pressure (MWP) indicated on the hose.
USED PRODUCTS
Considering the wide variety of products that are available and can be used in our equipment it is
impossible to check and make recommendations for all chemical data,regarding the risks of
possible chemical attack and their long term chemical reaction
SAMES KREMLIN can not be held liable for :
compatibility of wetted parts,
risks to staff and the surroundings,
for worn or defective parts, for faulty equipment or units, or the qualitiy of final product.
It is the responsibility of the user to know and prevent any possible risks such as toxic vapours,
fires or explosions. He shall determine the risks of immediate reactions or pursuant to repeated
exposures of the staff,
SAMES KREMLIN shall not be liable for physical injuries, direct or indirect material damages
caused by the use of chemicals.
SAMES KREMLIN - 4 - : 578.001.130-UK-1804
2. HANDLING
Check the weight and the dimensions of the equipment
(
refer to 'Technical features' section of the instruction manual
If weight and dimensions are too important, the unloading must be carried out by means of a forklift
or any other appropriate means with a qualified personnal and in a clear horizontal area to prevent
from risks of damage injury or an accident.
The centre of gravity is not in the centre of the machine : carry out by hand a stability-test after
having lifted the whole at 10 cm / 3.937" maximum.
After the unloading, the handling of the whole (eg: elevator pump) is carried out by means of a pallet
truck taking the bottom part of the frame.
Remark : Each pump motor is fitted with a ring. The ring is designed for the hoisting of one
pump and can not be used for the handling of the complete assembly.
3. STORING
Storing before installation :
- Storing ambient temperature : 0 / +50 °C / 0 / +122°F
- Protect the whole against dust, water trickling, dampness and shocks.
Storing after installation :
- Operating temperature : +15 / +35 °C / +59 / +138.2° F
- Protect the whole against dust, water tricling, dampness and shocks.
4. INSTALLATION OF THE EQUIPMENT
The machine is installed on a stable horizontal floor (for eg a concrete flag).
The machine shall be made stable by the use of holding down bolts or by the use of other anchoring
methods, strong enough to prevent unintended bodily movement of the equipment.
To avoid risks caused by static electricity, the equipment as well as its components
must be grounded.
For the pumping equipments (pumps, pneumatic rams, frame…), a section wire of 2.5
mm² is fixed on the material. Use this wire to connect the material to “the general
ground”. In case of severe environments (mechanical protection of the wire of earthing
insufficient, vibrations, mobile material…) where function damages at the ground are
probable, the user have to replace the provided wire of 2.5 mm² by a device more
adapted to its environment (wire with a more important section, bonding strip, fixing by
thimble with eyelet…).
The continuity of the ground must be controlled by a qualified electrician. If the continuity
of the ground is not ensured, check the terminal, the wire and the earthing point. Never
use the material without have solved this problem.
In the severe cases of environments (mechanical protection of the wire of earthing
insufficient, vibrations, mobile material…) where damages of the function put at the
ground are probable, the user will have to replace the wire of 2.5 mm² provided, by a
device more adapted to its environment (wire of more important section, bonding strip,
fixing by thimble with eyelet…),
The gun must be 'grounded' via a material hose or an air hose. In case of spraying by
means of a gun with cup, the air hose must be conductive,
The materials to be painted must also be grounded.
All the materials situated in the working area shall be grounded.
SAMES KREMLIN - 5 - : 578.001.130-UK-1804
Never store more than necessary inflammable materials inside the working area,
The materials must be stored into approved drums and grounded,
Use only grounded metals containers for the use of cleaning solvents,
Cardboard and paper are prohibited.
5. MARKING OF THE EQUIPMENT
Each equipment has a label plate with the name of the manufacturer, the equipment part
number, the interesting informations to use correctly the equipment (pressure, voltage,…) and
sometimes the above pictogram.
The equipment is designed with and consists of high quality materials and components which
can be re-used.
The 2012/19/UE European Directive covers all equipments with a crossed-out bin pictogram.
Please inform yourself about the collection systems for electric and electronic equipments.
Please act in accordance with local rules and do not dispose of old equipment with
household wastes. A correct disposal of old equipment will help prevent negative
consequences for the environment and health.
SAMES KREMLIN N° : 578.019.130-1702
578.019.130 1702
SAMES KREMLIN SAS
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
FR UK DE
Pour une utilisation sure, Il est de votre responsabilité
de :
Lire attentivement tous les documents contenus
dans le CD joint avant la mise en service de
l’équipement,
D’installer, d’utiliser, d’entretenir et de réparer
l’équipement conformément aux préconisations de
SAMES KREMLIN ainsi qu’aux réglementations
nationales et/ou locales,
Vous assurez que les utilisateurs de cet équipement
ont été formés, ont parfaitement compris les règles de
sécurité et qu’ils les appliquent.
To ensure safe use of the machinery, it is your
responsibility to:
Carefully read all documents contained on the
enclosed CD before putting the machinery into service,
Install, use, maintain and repair the machinery in
accordance with SAMES KREMLIN's recommendations
and national and/or local regulations,
Make sure that the users of the machinery have
received proper training and that they have perfectly
understood the safety rules and apply them.
Eine sichere Nutzung setzt voraus, dass Sie: :
alle in der CD enthaltenen Dokumente vor der
Inbetriebnahme der Anlage aufmerksam lesen,
die Anlage im Einklang mit den Empfehlungen von
SAMES KREMLIN sowie mit den nationalen und/oder
lokalen Bestimmungen installieren, verwenden,
warten und reparieren,
sich vergewissern, dass die Nutzer dieser Anlage
angemessen geschult wurden, die
Sicherheitsbestimmungen verstanden haben und sie
anwenden.
ES IT PT
Para una utilización segura, será de su
responsabilidad:
leer atentamente todos los documentos que se
incluyen en el CD adjunto antes de la puesta en servicio
del equipo,
instalar, utilizar, efectuar el mantenimiento y reparar
el equipo con arreglo a las recomendaciones de
SAMES KREMLIN y a la normativa nacional y/o local,
cerciorarse de que los usuarios de este equipo han
recibido la formación necesaria, han entendido
perfectamente las normas de seguridad y las aplican.
Per un uso sicuro, vi invitiamo a:
leggere attentamente tutta la documentazione
contenuta nel CD allegato prima della messa in
funzione dell'apparecchio,
installare, utilizzare, mantenere e riparare
l'apparecchio rispettando le raccomandazioni di SAMES
KREMLIN, nonché le normative nazionali e/o locali,
accertarvi che gli utilizzatori dell'apparecchio
abbiano ricevuto adeguata formazione, abbiano
perfettamente compreso le regole di sicurezza e le
applichino.
Para uma utilização segura, é da sua
responsabilidade:
Ler atentamente todos os documentos incluídos no
CD em anexo antes de pör o equipamento em
funcionamento,
Proceder à instalação, utilização, manutenção e
reparação do equipamento de acordo com as
preconizações de SAMES KREMLIN, bem como com
outros regulamentos nacionais e/ou locais aplicáveis,
Assegurar-se que os utilizadores do equipamento
foram devidamente capacitados, compreenderam
perfeitamente e aplicam as devidas regras de
segurança.
NL SE FI
Voor een veilig gebruik dient u:
alle document op de bijgevoegde cd aandachtig te
lezen alvorens het apparaat in werking te stellen,
het apparaat te installeren, gebruiken, onderhouden
en repareren volgens de door SAMES KREMLIN
gegeven aanbevelingen en overeenkomstig de
nationale en/of plaatselijke reglementeringen,
zeker te stellen dat de gebruikers van dit apparaat
zijn opgeleid, de veiligheidsregels perfect hebben
begrepen en dat zij die ook toepassen.
För en säker användning av utrustningen ansvarar ni
för följande:
Läs noga samtliga dokument som finns på den
medföljande cd-skivan innan utrustningen tas i drift.
Installera, använd, underhåll och reparera
utrustningen enligt anvisningarna från SAMES
KREMLIN och enligt nationella och/eller lokala
bestämmelser.
Försäkra er om att användare av denna utrustning
erhållit utbildning, till fullo förstått säkerhetsföreskrifterna
och tillämpar dem.
Käytön turvallisuuden varmistamiseksi
velvollisuutesi on:
Lukea huolella kaikki CD:llä olevat asiakirjat ennen
laitteiston käyttöönottoa,
Noudattaa laitteiston asennuksessa, käytössä,
kunnossapidossa ja huollossa SAMES KREMLIN in
suosituksia sekä kansallisia ja/tai paikallisia
määräyksiä,
Varmistaa, että laitteiston käyttäjät ovat koulutettuja
ja ymmärtävät täysin turvallisuusmääräykset ja miten
niitä sovelletaan.
PL CS SL
Dla zapewnienia bezpiecznego użytkowania na
użytkowniku spoczywa obowiązek:
Uważnego zapoznania się ze wszystkimi
dokumentami znajdującymi się na załączonej płycie CD
przed pierwszym uruchomieniem urządzenia,
Instalowania, użytkowania, konserwacji i naprawy
urządzenia zgodnie z zaleceniami firmy SAMES
KREMLIN oraz z przepisami miejscowymi,
Upewnienia, że wszyscy przeszkoleni użytkownicy
urządzenia zrozumieli zasady bezpieczeństwa i stosują
się do nich.
Pro bezpečné používání jste povinni:
Před uvedením zaříze do provozu si pozorně
přečíst veškeré dokumenty obsažené na přiloženém
CD,
Nainstalovat, používat, udržovat a opravovat
zařízení v souladu s pokyny firmy SAMES KREMLIN
a s národními a/nebo místními legislativními předpisy,
Ujistit se, že uživatelé tohoto zařízení byli vyškoleni,
že dokonale pochopili bezpečnostní pravidla a že je
dodržují.
Za varno uporabo ste dolžni:
natančno prebrati vse dokumente na CD pred
zagonom stroja,
inštalirati, uporabljati, vzdrževati in popravljati
opremo po določilih SAMES KREMLIN in v skladu z
veljavnimi nacionalnimi in/ali lokalnimi predpisi,
poskrbeti, da so uporabniki te opreme ustrezno
usposobljeni, poznajo varnostne predpise in da jih
upoštevajo.
SK HU RO
V záujme bezpečného je vašou povinnosťou:
pozorne si prečítať všetky dokumenty obsiahnuté na
priloženom CD predtým, ako zariadenie uvediete do
prevádzky,
nainštalovať, používať, udržiavať a opravovať
zariadenie v súlade s odporúčaniami spoločnosti
SAMES KREMLIN a národnými a/alebo miestnymi
predpismi,
uistiť sa, že používatelia tohto zariadenia boli
zaškolení, riadne porozumeli pravidlám bezpečnosti a
používajú ich.
A biztonságos használat érdekében az Ön
felelőssége, hogy:
a berendezés üzembe helyezése előtt figyelmesen
elolvassa a mellékelt CD által tartalmazott összes
dokumentumot,
a berendezést a SAMES KREMLIN ajánlasainak
valamint a nemzeti és/vagy helyi szabályozásoknak
megfelelően helyezze üzembe, használja, tartsa karban
és javítsa,
megbizonyosodjon róla, hogy a berendezés
felhasználói képzettek, tökéletesen megértették és
alkalmazzák a biztonsági előírásokat.
Pentru o utilizare sigură, este responsabilitatea dvs.
să:
Citiţi cu atenţie toate documentele de pe CD-ul
anexat, înainte de punerea în funcţiune a
echipamentului,
Instalaţi, utilizaţi, întreţineţi şi reparaţi echipamentul
conform instrucţiunilor SAMES KREMLIN precum şi
reglementărilor naţionale şi/sau locale,
Vă asiguraţi utilizatorii acestui echipament au
fost instruiţi, au înţeles perfect regulile de securitate şi
le aplică integral.
Déclaration(s) de conformité au verso de ce document / Declaration(s) of conformity at the back of this document / Konformitätserklärung(en) auf der Rückseite dieser Unterlage
/ Declaración (es) de conformidad en el reverso de este documento / Dichiarazione/i di conformità sul retro del presente documento
/ Declaração(ções) de conformidade no verso do documento / Conformiteitsverklaring(en) op de keerzijde van dit document / Försäkran om överensstämmelse på omstående sida
av detta dokument / Vaatimustenmukaisuusvakuutukset tämän asiakirjan kääntöpuolella / Deklaracja(e) zgodności na odwrocie dokumentu
/ Prohlášení o shodě se nachází/nacházejí na zadní straně tohoto dokumentu / Deklaracija(e) o skladnosti na hrbtni strani tega dokumenta / Vyhlásenie/-a o zhode sa nachádzajú na
zadnej strane dokumentu / A dokumentum hátlapján szereplő megfelelőségi nyilatkoz(ok) / Declaraţii de conformitate pe versoul acestui document
SAMES KREMLIN - 2 - N° : 578.019.130-1702
DECLARATION UE DE CONFORMITE
UE DECLARATION OF CONFORMITY
EU- KONFORMITÄTSERKLÄRUNG
DECLARACIÓN UE DE CONFORMIDAD
DICHIARAZIONE DI CONFORMITÀ UE
DECLARAÇÃO UE DE CONFORMIDADE
EU-CONFORMITEITSVERKLARING
EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE
EU- VAATIMUKSENMUKAISUUSVAKUUTUS
DEKLARACJA ZGODNOŚCI UE
EU PROHLÁŠENÍ O SHO
IZJAVA EU O SKLADNOSTI
VYHLÁSENIE O ZHODE
EU-MEGFELELŐSÉGI NYILATKOZAT
DECLARAŢIA DE CONFORMITATE UE
Le fabricant / The manufacturer / Der Hersteller
/ El fabricante / Il produttore / O fabricante
/ De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce
/ Proizvajalec / Výrobca / Gyártó / Fabricantul:
SAMES KREMLIN SAS
13, chemin de Malacher
38 240 - MEYLAN - FRANCE
Tél. : 33 (0)4 76 41 60 60
Déclare que le matériel désigné ci-après / Herewith declares that the equipment / erklärt hiermit, dass die / Declara que el material designado a
continuación / Dichiara che il materiale sottoindicato / Declara que o material a seguir designado / verklaart dat de hieronder aangeduide apparatuur
/ Kungör att den utrustning som anges här nedan / ilmoittaa, että alla mainitut laitteistot / Oświadcza, że wymienione poniżej urządzenia / Prohlašuje,
že níže uvedené vybavení / Izjavlja, da je opisana oprema spodaj / Vyhlasuje, že zariadenie uvedené nižšie / Kijelenti, hogy a megjelölt anyag a
továbbiakban / Declară că echipamentul precizat mai jos:
PISTOLETS DOSEURS REGULEX® / REGULEX® PROPORTIONING GUNS
/ PISTOLAS DE DOSIFICACIÓN REGULEX®
MONOBLOC / COMPACTED RENFORCE / REINFORCED
5 cc 7 cc
25cc 27 cc
50 cc 47 cc
107 cc
Est conforme à la législation d’harmonisation de l’Union applicable suivante / Is in conformity with the relevant Union harmonisation legislation / Erfüllt
die einschlägigen Harmonisierungsrechtsvorschriften der Union / es conforme con la legislación de armonización pertinente de la Unión / è conforme
alla pertinente normativa di armonizzazione dell’Unione / in overeenstemming met de desbetteffende harmonisatiewetgeving van de Unie / med den
relevanta harmoniserade unionslagstiftningen / on asiaa koskevan unionin yhdenmukaistamislainsäädännön vaatimusten mukainen / jest zgodny z
odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego / Shoduje se s následují příslušnou evropskou harmonizační legislativou
/ V skladu s harmonizirano zakonodajo Unije / Je v súlade s uplatniteľnými harmonizačnými právnymi predpismi EÚ / Megfelel a következő
alkalmazandó uniós harmonizációs szabályozásnak / Este conform cu legislaţia aplicabilă de armonizare de mai jos
Directive Basse Tension / Low Voltage Directive / Niederspannung-Richtlinie / Directiva Baja Tensión / Direttiva Bassa
Tensione / Directiva de Baixa Tensão / Richtlijn Laagspanning / Lågspänningsdirektivet / Pienjännitedirektiivi / Dyrektywa
Niskonapięciowa / Směrnice Pro Nízké Napĕtí / Direktiva O Nizki Napetosti / Smernica O Nízkom Napätí / Feszültséghatárra
Vonatkozó Irányelv / Directiva Privind Tensiunile Joase
EN 60335-1
EN 60335-2-15
2014/35/UE
Directive Compatibilité Electromagnétique / Electromagnetic Compatibility Directive / Richtlinie Für Elektromagnetische
Verträglchkeit / Directiva de Compatibilidad Eletromagnética / Direttiva Compatibilita Elettromagnetica / Directiva relativa à
Compatibilidade Eletromagnética / Richtlijn Elektromagnetische Compatibiliteit / Direktivet om Eletktromagnetisk Kompatibilitet
/ EMC-direktivi / Dyrektywa Kompatybilności Elektromagnetycznej / Směrnice Pro Elektromagnetickou Kompatibilitu
/ Direktiva O Elektromagnetni Združljivost / Smernica O Elektromagnetickej Kompatibilite / Az Elektromágneses
Összeférhetőségre vonatkozó Irányelv / Directiva Privind Compatibilitatea Electromagnetică
2014/30/UE
SAMES KREMLIN - 3 - N° : 578.019.130-1702
La présente déclaration de conformité est établie sous la seule responsabilité du fabricant / This declaration of conformity is issued under the sole
responsibility of the manufacturer / Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller / La presente
declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante / La presente dichiarazione di conformità è rilasciata sotto la
responsabilità esclusiva del fabbricante / A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante / Deze
conformiteitsverklaring wordt verstrekt onder volledige verantwoordelijkheid van de fabrikant / Denna försäkran om överensstämmelse utfärdas på
tillverkarens eget ansvar / Tämä vaatimustenmukaisuusvakuutus on annettu valmistajan yksinomaisella vastuulla / Niniejsza deklaracja zgodności
wydana zostaje na wyłączną odpowiedzianość producenta / Toto prohláŝení o skodě se vydává na výhradní odpovědnost výrobce / Za izdajo te izjave
o skladnosti je odgovoren izključno proizvajalec / Toto vyhlásenie o zhode sa vydáva / na vlastnú zodpovednosť výrobcu / Ezt a megfelelőségi
nylatkozatot a gyártó kizárólagos felelőssége mellett adják ti / Prezenta declaraţie de conformitate este emisă pe răspunderea exclusivă a
producătorului.
Philippe PROVENAZ
Directeur Innovation & Développement / Innovation & Development
Director / Direktor für Innovation & Entwicklung / Director de
Inovación y Desarrollo / Direttore Innovazione e sviluppo
/ Diretor de Inovação / Manager Innovatie en Ontwikkeling / Direktör
för Forskning och Utveckling / Innovaatio- ja kehitysjohtaja
/ Dyrektor ds. Innowacji I Rozwoju / Ředitel pro inovace a vývoj
/ Direktor za inovacije in razvoj / Riaditeľ pre inováciu a rozvoj
/ Innovációs és fejlesztési igazgató / Director Inovaţie şi Dezvoltare
Fait à Meylan, le / Established in Meylan, on / Geschehen zu Meylan, am / En Meylan, a / Redatto a Meylan, / Vastgesteld te Meylan, / Utformat i
Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, / Întocmită la Meylan,
pe data de 01/02/2017 - 02/01/2017
INSTRUCTION MANUAL
REGULEX
FLOW REGULATOR
PROPORTIONING GUN
Manual : 2207 573.005.212
Date : 07/07/22 - Supersede : 06/07/11
Modif.: Update
TRANSLATION FROM THE ORIGINAL MANUAL
IMPORTANT : before assembly and start-up, please read and clearly understand all documents
relating to this equipment (professional use only).
PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR
NOTICE.
SAMES KREMLIN SAS
l
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
SAMES KREMLIN Page 1 Manual : 573.005.212
INSTRUCTION MANUAL
REGULEX
FLOW REGULATOR PROPORTIONING GUN
SUMMARY
1. GENERAL SAFETY INSTRUCTIONS ........................................................................................................ 2
2. DESCRIPTION ............................................................................................................................................. 3
3. INSTALLATION ........................................................................................................................................... 5
4. OPERATING ................................................................................................................................................ 5
5. REGULEX® SHUTDOWN ........................................................................................................................... 8
6. MAINTENANCE ........................................................................................................................................... 8
7. TROUBLESHOOTINGS .............................................................................................................................. 9
8. DISASSEMBLY- ASSEMBLY ..................................................................................................................... 9
The specifications of the REGULEX® proportioning gun are available in a
documentation enclosed to the manual.
SAMES KREMLIN Page 2 Manual : 573.005.212
Dear Customer,
You are the owner of our new REGULEX® gun and we would like to take this opportunity to thank
you.
To make sure your investment will provide full satisfaction, special care has been taken by
SAMES KREMLIN during all designing and manufacturing processes.
To obtain the best result, safe and efficient operation of your equipment, we advice you to read and
make yourself familiar with this instruction and service manual. Indeed, the non-compliance with
instructions and precautions stated in this manual could reduce the equipment working-life, result in
operating trouble and create unsafe conditions.
1. GENERAL SAFETY INSTRUCTIONS
CAUTION : The equipment can be dangerous if you do not follow our
instructions concerning installation and servicing described in this
manual and in accordance with applicable European standards and local
national safety regulations.
Please carefully read all the instruction literature before operating your
equipment.
Only trained operators can use the equipment.
The foreman must ensure that the operator has understood the safety instructions for this
equipment as well as the instructions in the manuals for the different parts and accessories.
Read carefully all instruction manuals, label markings before operating the equipment.
Incorrect use may result in injury. This equipment is for professional use only. It must be used only
for what it has been designed for. Never modify the equipment. The parts and accessories
supplied must be regularly inspected. Defective or worn parts must be replaced.
Never exceed the equipment components' maximum working pressure.
Comply with regulations concerning safety, fire risks, electrical regulations in force in the country
of final destination of the material. Use only products or solvent compatible with the parts in
contact with the material (refer to data sheet of the material manufacturer).
Refer to 'Installation and safety instructions' document
(doc. 578.001.130-UK)
SAMES KREMLIN Page 3 Manual : 573.005.212
2. DESCRIPTION
The REGULEX® system consists of a REGULEX® proportioning gun and a control bay.
The REGULEX® proportioning gun is designed to dispense mastic beads or single or two-component
adhesive beads.
The REGULEX® system is normally mounted on a robot or a multi-axis table. The manipulator sends
a signal to the control bay to provide the necessary output to dispense the bead.
The flow as well as the proportioning are programmable and electronically controlled thanks to the
control bay.
The following applications can be carried out :
Constant diameter at constant speed.
Variable diameter at contant speed.
Constant diameter at variable speed.
Variable diameter at variable speed.
The materials can be applied cold or hot depending upon the use conditions and the kind of
REGULEX® gun.
The heating kit enables to maintain the temperature, the fluid must be heated first by means of
the filling pump and of the heated hoses.
PRINCIPLE OF THE REGULEX® SYSTEM
The main function of the REGULEX® system is to control and regulate the dispensing of the
material bead.
As it is in relation with the robot and depending upon the flow information that is sent periodically
by the robot, it will act on the piston of the chamber to give in the shortest time possible the flow
asked by the robot.
SAMES KREMLIN Page 4 Manual : 573.005.212
PRINCIPLE OF THE REGULEX® GUN
The gun consists of a chamber which contains the exact volume of material necessary to the
dispense of the bead. The chamber has two means of access :
an inlet which allows material to enter,
an outlet which allows the dispensing of material.
The piston movement is carried out by a servo-feed model "brushless", piloted by a digital servo
amplifier.
The REGULEX® proportioning gun has its own sensors (pressure and movement) so that the
REGULEX® Electronic Bay can regulate the volume of the dispensed material.
SAMES KREMLIN Page 5 Manual : 573.005.212
3. INSTALLATION
PNEUMATIC CONNECTIONS
Install an HP hose between the fluid outlet of the filling pump and the fluid inlet of the mastic
regulator (if there is one) and and HP hose between the fluid outlet of the mastic regulator and the
fluid inlet of the proportioning gun. The hose can be an heating hose for easier fluid flow.
Install a plastic hose ( 4x6) to supply the gun valves. Connect the gun to the compressed air
network via a pressure reducing valve. Adjust the pressure to 6 bar / 87 psi.
Connect the filling pump air motor to the compressed air network via a pressure reducing valve.
Adjust the pressure between 2 and 5 bar / 29 and 72.5 psi (clean air).
ELECTRIC CONNECTIONS
Connect the 3 electric cables between the REGULEX® bay and the proportioning gun (cables
fitted with connectors : HARTING 15 pins, JAEGER 6 pins, JAEGER 4 pins).
Connect the electric cable of the heating kit (if there is one) between the temperature regulation
box and the proportioning gun (cable fitted with 8 pins JAEGER connector).
Connect the interface electric cables between the REGULEX® bay and the robot control bay.
Connect the REGULEX® bay to the mains.
4. OPERATING
BEFORE STARTING UP
The start-up is carried out from the REGULEX® control bay (or at any other control box which has
the same functions).
(refer to chapter «operating» of the control bay instruction manual).
Before starting up the REGULEX® :
- correct the offsets (see «Offset Page» - Bay instruction manual)
- check the values of the parameters and change them if necessary (see «Parameter page» - Bay
instruction manual)
The parameters are entered at the factory before the bay is released for delivery. For each
parameter, a value is given for the first operating.
Caution : Some parameters must correspond to the kind of REGULEX®
proportioning gun controlled by the bay.
The values of the other parameters must be modified to get an optimal operating of the
REGULEX® system.
Offset patching procedure
The bay must be "switched on", but not into service.
The variable speed drive must not be supplied "with power".
The REGULEX® proportioning machine must not be in pressure.
Display the "OFFSET" page on the screen of the bay to reach the parameters (refer to bay
instruction manual).
Pressure offset correction :
Select "sensor pressure Regulex A" display : xx bar / xx psi
xx bar / xx psi is the pressure that the sensor measures. The value of that pressure must be
contained in - 4 bar / 59 psi and + 4 bar / 59 psi to make the validation possible (otherwise, fault of
the pressure sensor).
xx bar / xx psi + key pressure 0
SAMES KREMLIN Page 6 Manual : 573.005.212
Position offset correction :
Select "sensor position Regulex A"
display : xx mm
By means of a screwdriver, lift up the end of
the potentiometer (13) that is on the
lubricator ring (28) and raise it to the top of
the light.
The value of that position must be
contained in 0 to + 4 mm to make the
validation possible (otherwise, fault of the
movement sensor).
xx mm + key position 0
Important :
Dimension of the position sensor with lock-
nut (sensor to stop) :
- Regulex® proportioning machine, type
compacted : D = 69,5 mm
- Regulex® proportioning machine, type
reinforced : D = 123 mm
Example above : proportioning machine,
version compacted 5cc
PRIMING STAGE
When starting-up for the first time, ypu must prime the REGULEX® proportioning gun :
Come to move down the REGULEX® gun piston to low position.
Pressurize the filling pump.
WARNING : the fluid pressure at the inlet of the REGULEX® gun must
be lower or the same than the maximum pressure of the REGULEX®
(refer to REGULEX® features).
An overpressure must lead to a bad operating of the equipment.
Pressurize the filling and exhaust valves (maximum 6 bar / 87 psi).
The filling and exhaust valves are open.
The fluid is forced through the hoses then through the REGULEX® chamber.
Let the fluid flow out from the outlet of the REGULEX®.
Close the REGULEX® valves.
End of the PRIMING operation, beginning of the WORKING operation.
The working operation consits of 3 functions : FILLING - REGULATION - EXTRUSION.
FILLING STAGE
The exhaust valve is closed.
The filling valve is open.
The REGULEX® gun chamber is filled by servo-controlling the ascent of the piston to the pressure
of the chamber.
SAMES KREMLIN Page 7 Manual : 573.005.212
REGULATION STAGE
The gun is filled.
The filling and exhaust valves are closed.
At the end of the filling operation, the piston is at its upper position. The system measures, controls
and regulates the informations : position of the piston, pressure inside the chamber, flow instruction.
EXTRUSION STAGE
The gun is filled.
The filling valve is closed.
The robot controls the extrusion of the seal.
The exhaust valve opens.
The motor, via the ball screw, drives the piston. The material is exhausted to a constant flow (for a
constant instruction).
The REGULEX® piston comes down in the chamber Dispensing of the bead.
If the REGULEX® gun is fitted with an heating kit :
Start up the control unit that controls the temperature.
Program the temperature regulators :
Instruction temperature.
Low alarm temperature.
High alarm temperature.
Do not prime the REGULEX® gun as long as the fluid is not at the required temperature.
IMPORTANT
During the programming of the trajectory, begin the dispense of the bead where it
will have the most constant diameter.
At the end of the bead :
- Maintain a constant flow at the end of the trajectory,
- Program a null flow at the instant preceding the covering of the bead,
- Then program the closing of the exhaust valve.
WARNING
Before any action on the cables connected to the REGULEX® bay, you must
switch it off.
SAMES KREMLIN Page 8 Manual : 573.005.212
5. REGULEX® SHUTDOWN
Guards (air motor cover, coupling shields, housings …) have been designed for safe
use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure and / or
damage to property due to removal or partial removal of the guards.
SHUTDOWN SUPERIOR TO 5 MINUTES
The REGULEX® proportioning gun must fall back.
A null flow must be programmed.
The nozzle must come stemming in a receptacle full of oil (or any other appropriate material) or
positioning itself in a tip.
EXTENDED SHUTDOWN (EXAMPLE / NIGHT)
Carry out the previous stage.
Switch off the bay.
Shut off the compressed air on the filling shift.
Leave compressed air on the REGULEX® gun valves.
STARTING UP
Put air on the filling shift.
Switch on the REGULEX® bay.
From the REGULEX® bay, drain the REGULEX® gun before continuing an automatic cycle.
6. MAINTENANCE
Guards (air motor cover, coupling shields, housings …) have been designed for safe
use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure and / or
damage to property due to removal or partial removal of the guards.
WEEKLY CARE
Check the hoses.
Check that there is no leak from the fittings.
Drain the REGULEX® gun after an extended shutdown.
Clean the nozzle or change it (clogging or bead fault).
SAMES KREMLIN Page 9 Manual : 573.005.212
MONTHLY CARE
Check the parameters of the REGULEX® bay (refer to bay instruction manual).
Check the wear of the friction ring at the lubrication level. Give the ring a quarter turn or change it
if necessary.
Lubricate the screw ball (every 300 hours).
(KLUBER grease - P.N°. NB 52)
(screw ball duration : 500 000 cycles)
HALF-YEARLY CARE
Remove the gun fluid part :
- Clean the valves, the fluid chamber. Change the valves, if necessary.
- Change the seals and the defective parts.
- Check the piston condition.
Define the offsets on the REGULEX® bay (refer to § 5 and to bay instruction manual).
YEARLY CARE
Check the electrovalves.
Check the screw ball.
Lubricate the outside and inside teeth of the reducer and of the bearings
(HARMONIC DRIVE grease - P.N°. SK1A)
7. TROUBLESHOOTINGS
If a problem occurs during the operating of the REGULEX®, the fault will be displayed on the display
unit (refer to bay instruction manual).
8. DISASSEMBLY- ASSEMBLY
Guards (air motor cover, coupling shields, housings …) have been designed for safe
use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure and / or
damage to property due to removal or partial removal of the guards.
Before removing the REGULEX® proportioning gun :
- Shut off the pump air supply (pump into service).
- Drain the REGULEX®.
- Open the pump drain cock.
- Shut off the REGULEX®.
- Disconnect all the electrical connection beads.
- Put aside the REGULEX® proportioning gun.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55

Sames REGULEX 7 - 27 - 47 - 107CC Manual de utilizare

Tip
Manual de utilizare