Parkside PDST 10 B3 Instructions Manual

IAN 327372_1904

AIR HOSE REEL

Translation of the original instructions

БАРАБАН ЗА ПНЕВМАТИЧЕН

МАРКУЧ

Превод на оригиналното ръководство за експлоатация

TAMBUR CU FURTUN PENTRU AER

Traducerea instrucţiunilor de utilizare original

ΛΆΣΤΙΧΟΥ ΆΈΡΟΣ ΚΆΡΟΥΛΙ

Μετάφραση των αυθεντικών οδηγιών λειτουργίας

BUBANJ S PNEUMATSKIM CRIJEVOM

Prijevod originalnih uputa za uporabu

DRUCKLUFT-SCHLAUCHTROMMEL

Originalbetriebsanleitung

BUBANJ SA PNEUMATSKIM

CREVOM

Prevod originalnog uputstva za upotrebu

AIR HOSE REEL PDST 10 B3

GB / CY Translation of the original instructions Page 1

HR Prijevod originalnih uputa za uporabu Stranica 11

RS Prevod originalnog uputstva za upotrebu Strana 21

RO Traducerea instrucţiunilor de utilizare original Pagina 31

BG Превод на оригиналното ръководство за експлоатация Cтраница 41

GR / CY Μετάφραση των αυθεντικών οδηγιών λειτουργίας Σελίδα 51

DE / AT / CH Originalbetriebsanleitung Seite 61

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

Prije nego što pročitate tekst, otvorite stranicu sa slikama i upoznajte se na osnovu toga sa svim funkcijama

uređaja.

Pre čitanja rasklopite obe strane sa slikama te se upoznajte sa svim funkcijama uređaja.

Înainte de a citi instrucţiunile, priviţi imaginile şi familiarizaţi-vă cu toate funcţiile aparatului.

Преди да прочетете отворете страницата с фигурите и след това се запознайте с всички функции

на уреда.

Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις λειτουργίες

της συσκευής.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

A

B C

D E

PDST 10 B3

GB

│

CY

│

1 ■

Contents

Introduction .........................................................2

Intended use ..................................................................... 2

Features ......................................................................... 2

Package contents ................................................................. 2

Technical speciﬁcations ............................................................. 2

Safety instructions ....................................................3

Residual risk .........................................................4

Before use ...........................................................4

Installation ..........................................................4

Finding an installation site ........................................................... 4

Mounting the compressed air hosereel ................................................ 5

Commissioning .......................................................5

Connecting the compressed air hose reel to a compressed air source ......................... 5

Connecting the compressed air hose reel to a compressed air tool ........................... 5

Using the compressed air hose reel ................................................... 5

Unrolling the hose ................................................................. 6

Rolling up the hose ................................................................ 6

Adjusting the hose stopper .......................................................... 6

Maintenance and cleaning .............................................6

Disposal .............................................................7

Kompernass Handels GmbH warranty ...................................7

Service ..............................................................8

Importer ............................................................8

Original Declaration of Conformity ......................................9

PDST 10 B3

■ 2

│

GB

│

CY

AIR HOSE REEL PDST 10 B3

Introduction

Congratulations on the purchase of your new

appliance. You have chosen a high-quality product.

The operating instructions are part of this product.

They contain important information about safety,

usage and disposal. Before using the product,

please familiarise yourself with all of the operating

and safety instructions. Use the product only as

described and for the range of applications speci-

ﬁed. Please also pass these operating instructions

on to any future owner.

Intended use

The compressed air hose reel is used in conjunction

with a compressor to supply compressed air tools

with power. The compressed air hose reel is exclu-

sively for transporting compressed air. It is not suit-

able for transporting liquids. Use the product only

as described and for the range of applications

speciﬁed. Please keep these instructions in a safe

place for future reference. Pass all relevant docu-

ments to any future owner. Any use which deviates

from the intended use is prohibited and potentially

dangerous. Damage caused by failure to observe

the instructions or misuse is not covered by the

warranty and does not fall under the manufacturer's

liability. The appliance is designed for domestic use

and must not be used for commercial or industrial

purposes.

Symbols on the compressed air tool:

WARNING!

Read the operating instructions

before use.

Wear a dust mask.

Wear protective goggles.

Wear hearing protection.

Wear protective gloves.

Features

Drum housing

Pivoting mounting bracket

Hook for hanging

Hose stopper

Compressed air hose for compressed air tools

Quick-release coupling

Compressed air connection

Screws

Fastening screws

Mounting accessories

Mounting screws

Wall plugs

Package contents

1 air hose reel

1 mounting accessories

(2x mounting screws, 2x wall plugs)

1 set of operating instructions

Technical speciﬁcations

Working pressure max. 10bar

Rewind system Automatic

Length of compressed air hose 10 m

Compressed air connection size 1/4" = 6.35 mm

Weight 1855 g

PDST 10 B3

GB

│

CY

│

3 ■

WARNING!

Safety instructions

WARNING!

► PLEASE READ THE OPERATING INSTRUC-

TIONS CAREFULLY BEFORE USE. THEY ARE

A PART OF THIS APPLIANCE AND MUST BE

AVAILABLE AT ALL TIMES!

■ This appliance may be used by people aged

16 years and above and by people with limited

physical, sensory or mental capabilities or lack

of experience and knowledge, provided that

they are under supervision or have been told

how to use the appliance safely and are aware

of the potential risks. Do not allow children to

use the appliance as a toy. Cleaning and user

maintenance tasks may not be carried out by

children unless they are supervised.

■ The compressed air hose reel is used in conjunc-

tion with a compressor to supply compressed

air tools with power. The compressed air hose

reel is exclusively for transporting compressed

air. It is not suitable for transporting liquids.

■ The compressed air hose reel is designed to be

mounted on a suitable wall or ceiling; use

without mounting is not permitted.

■ The compressed air hose reel has not been

developed for commercial or industrial use or

use in workshops. This product is intended for

private use only. The compressed air hose reel

must only be used for its intended purpose. Any

other use deviating from this is prohibited!

■ Proper use also involves compliance with the

safety instructions as well as the assembly

instructions contained in the operating instruc-

tions. The manufacturer or dealer accepts no

liability for damage caused by improper or

incorrect use.

■ Use only accessories suitable for this product.

People who use the compressed air hose reel

and carry out any maintenance work must famil-

iarise themselves with it. They must also be

informed of potential hazards. The applicable

accident prevention regulations must be

observed correctly and conscientiously.

■ The manufacturer shall not be liable for

damage resulting from modiﬁcations made to

the compressed air hose reel.

■ Mount the compressed air hose reel before

using it to minimise the risk of injury.

■ The compressed air hose reel must only be used

with compressed air. Do not use the

compressed air hose reel with liquids.

■ Always allow the hose to roll up in a controlled

manner, since the compressed air hose reel

rewind mechanism is equipped with a tension

spring. A hose can cause injury while rolling up

if not used correctly. If the rewind mechanism is

damaged, the compressed air hose reel must be

taken out of operation immediately and

repaired by a specialist. Do not open the

housing of the compressed air hose reel your-

self.

■ Only use accessories that are in perfect condi-

tion and are designed for use with the

compressed air hose reel.

■ Never exceed the maximum working pressure of

the compressed air hose reel or the compressed

air tool being used.

■ Do not connect the compressed air hose reel to

compressed air lines until you have ensured that

the maximum permissible working pressure

cannot be exceeded by more than 10% (e.g.

by using a pressure reducer).

PDST 10 B3

■ 4

│

GB

│

CY

■ Always keep the compressed air hose away

from sharp edges, heat and oil.

■ Always check the compressed air hose before

using the compressed air hose reel.

■ The compressed air hose reel must only be used

in conjunction with a compressor. Operation

with compressed air cylinders is prohibited.

■ The use of pneumatic tools with ﬂammable

gases is prohibited. There is a risk of an

explosion!

■ The compressed air hose reel must not be used

for other purposes.

■ Do not store the compressed air hose reel within

reach of children.

■ Never point the compressed air hose reel or its

hoses at people or animals.

■ Always use original spare parts for repairs.

Non-original spare parts can cause serious

damage.

■ When carrying out maintenance, adjustment

and repair work, always disconnect the

compressed air hose reel from the compressed

air supply ﬁrst.

■ Do not make any modiﬁcations to the

compressed air hose reel.

■ Do not use the compressed air hose reel unless

it is in perfect condition. If in doubt, consult a

specialist before using the appliance.

■ Have all repairs carried out by qualiﬁed

professionals.

■ Never transport the compressed air hose reel

by holding onto the hoses.

■ Always hold the hose ﬁrmly in place when

disconnecting it from the compressed air source

or a compressed air tool.

Residual risk

Even if the appliance is operated properly, there

will still be residual risks. The following hazards

may occur in connection with the construction and

design of this compressed air hose reel:

– Danger caused by compressed air hoses

thrashing around.

– Risk of tripping due to compressed air hoses

lying around.

Reduce the residual risks by using the appliance

carefully and in accordance with the instructions.

Before use

■ Remove all parts from the packaging and check

whether the compressed air hose reel or the

individual parts are damaged. If this is the case,

do not use the compressed air hose reel.

Contact the manufacturer at the speciﬁed

service address.

■ Remove all protective ﬁlms and other transport

packaging.

■ Check that the delivery is complete.

Installation

Finding an installation site

■ Mount the compressed air hose reel on a suit-

able ceiling or wall; use of the compressed air

hose reel without mounting is not permitted.

■ Select a location for mounting the compressed

air hose reel where it will not cause an obstruc-

tion.

■ With ceiling mounting, a mounting height of at

least 2.5 metres should be observed.

■ You will need the following tools to mount the

appliance: a drill, a suitable drill bit and a

screwdriver.

PDST 10 B3

GB

│

CY

│

5 ■

Mounting the compressed air

hosereel

WARNING! RISK OF INJURY!

► Incorrect installation of the compressed air

hose reel can lead to injuries.

■ Make sure that there are no cables or pipes at

the installation site. If necessary, use a detector

or contact a specialist.

■ Also observe the safety instructions for the drill

that is used.

NOTE! RISK OF DAMAGE!

► Incorrect installation can lead to damage.

■ Make sure that the support material (wall) at

the installation location is strong enough to

support the weight of the compressed air hose

reel. If you have any questions, please contact

a specialist.

1. Use the pivoting mounting bracket

as a

template. You can disconnect the mounting

bracket from the compressed air hose reel

after you have removed the two screws by

turning them anticlockwise (see ﬁg. C).

Mark the position of the holes on the support

material with a pencil.

2. Drill the holes required for mounting in the

support material.

3. Mount the mounting bracket

with suitable

ﬁxing material (see mounting accessories

).

4. Reattach the compressed air hose reel to the

mounting bracket

.

To do this, screw the screws

that you removed

in step 1 back in clockwise (see Figure C)

Commissioning

Connecting the compressed air hose

reel to a compressed air source

♦ Plug the compressed air connection of the

compressed air hose reel into the quick coupling

of the compressed air source.

Connecting the compressed air hose

reel to a compressed air tool

NOTE! RISK OF DAMAGE!

► Improper handling of the compressed air

hose reel can lead to damage.

■ Never exceed the maximum working pressure

of the compressed air hose reel and ensure that

the connectors used are compatible.

The compressed air hose can be immediately

connected to the compressed air tool via the air

inlet of the compressed air tool using the quick

coupling

.

Using the compressed air hose reel

WARNING! RISK OF INJURY!

► The compressed air hose reel is equipped

with a return mechanism. This is operated by

a strong spring. If the compressed air hose

rolls up incorrectly, injuries may occur.

■ Never allow the compressed air hose

to

spring back in an uncontrolled way.

■ If the return mechanism is damaged, stop using

the compressed air hose reel immediately.

Have the damage repaired by a specialist.

■ The compressed air hose reel has a locking and

return mechanism. This makes it easy to pull out

and return the compressed air hose

.

PDST 10 B3

■ 6

│

GB

│

CY

■ The locking device generates a clicking noise

when rolling up and unrolling. This is not a fault.

If the noise changes after using the equipment

numerous times and/or if there are problems

with the mechanism, seek expert assistance or

contact customer service.

Unrolling the hose

♦ Pull the compressed air hose carefully out of

the drum housing to the desired working length

for the pneumatic tool. If you release the

compressed air hose after a click, the

locking device engages at this length.

Rolling up the hose

♦ A short pull on the compressed air hose

releases the lock.

♦ Make sure that the compressed air hose

rolls

back into the drum housing in a controlled

manner.

Adjusting the hose stopper

The position of the hose stopper can be

adjusted and interrupts the rolling up of the

compressed air hose to the desired length. You

will need a Phillips screwdriver (not included) to

adjust the hose stopper .

♦ Undo the fastening screws

with the Phillips

screwdriver (see ﬁg. D).

♦ Slide the hose stopper

along the

compressed air hose to the desired position.

♦ Retighten the fastening screws

.

Maintenance and cleaning

NOTE

► The compressed air hose reel must be serviced

regularly and overhauled to ensure proper

functioning and compliance with safety require-

ments. Improper and incorrect operation can

lead to failures and damage to the appliance.

■ Never use harsh and/or abrasive cleaning

agents or solvents. These could damage the

plastic parts of the compressed air hose reel.

■ Never allow water to get inside the compressed

air hose reel. Make sure that the housing and the

compressed air hose remain free of dust and dirt.

To ensure this is the case, wipe the compressed

air hose reel regularly with a clean cloth.

■ Before returning the compressed air hose to the

housing, clean the compressed air hose for

further use if possible.

■ Clean the compressed air hose reel and the

hose with a damp cloth and a little soap at

regular intervals.

PDST 10 B3

GB

│

CY

│

7 ■

Disposal

The packaging consists of environ-

mentally friendly material. It can be

disposed of in local recycling

containers.

Do not dispose of the appliance in the normal

domestic waste!

Your local community or municipal authorities can

provide information on how to dispose of the

worn-out appliance.

Dispose of the packaging in an envi-

ronmentally friendly manner.

Note the labelling on the packaging

and separate the packaging material

components for disposal if necessary.

The packaging material is labelled

with abbreviations (a) and numbers(b)

with the following meanings:

1–7: plastics,

20–22: paper and cardboard,

80–98: composites.

Your local community or municipal

authorities can provide information on

how to dispose of the worn-out

product.

Kompernass Handels GmbH

warranty

Dear Customer,

This appliance has a 3-year warranty valid from the

date of purchase. If this product has any faults, you,

the buyer, have certain statutory rights. Your statu-

tory rights are not restricted in any way by the

warranty described below.

Warranty conditions

The warranty period starts on the date of purchase.

Please keep your receipt in a safe place. This will

be required as proof of purchase.

If any material or manufacturing fault occurs within

three years of the date of purchase of the product,

we will either repair or replace the product for you

or refund the purchase price (at our discretion).

This warranty service requires that you present the

defective appliance and the proof of purchase

(receipt) within the three-year warranty period,

along with a brief written description of the fault

and of when it occurred.

If the defect is covered by the warranty, your

product will either be repaired or replaced by us.

The repair or replacement of a product does not

signify the beginning of a new warranty period.

Warranty period and statutory claims for

defects

The warranty period is not prolonged by repairs

eﬀected under the warranty. This also applies to

replaced and repaired components. Any damage

and defects present at the time of purchase must be

reported immediately after unpacking. Repairs

carried out after expiry of the warranty period shall

be subject to a fee.

PDST 10 B3

■ 8

│

GB

│

CY

Scope of the warranty

This appliance has been manufactured in accord-

ance with strict quality guidelines and inspected

meticulously prior to delivery.

The warranty covers material faults or production

faults. The warranty does not extend to product

parts subject to normal wear and tear or to fragile

parts which could be considered as consumable

parts such as switches, batteries or parts made of

glass.

The warranty does not apply if the product has

been damaged, improperly used or improperly

maintained. The directions in the operating instruc-

tions for the product regarding proper use of the

product are to be strictly followed. Uses and

actions that are discouraged in the operating

instructions or which are warned against must be

avoided.

This product is intended solely for private use and

not for commercial purposes. The warranty shall be

deemed void in cases of misuse or improper

handling, use of force and modiﬁcations / repairs

which have not been carried out by one of our

authorised Service centres.

Warranty claim procedure

To ensure quick processing of your case, please

observe the following instructions:

■ Please have the till receipt and the item number

(e.g.IAN12345) available as proof of purchase.

■ You will ﬁnd the item number on the type plate

on the product, an engraving on the product,

on the front page of the operating instructions

(below left) or on the sticker on the rear or

bottom of the product.

■ If functional or other defects occur, please

contact the service department listed either by

telephone or by e-mail.

■ You can return a defective product to us free of

charge to the service address that will be

provided to you. Ensure that you enclose the

proof of purchase (till receipt) and information

about what the defect is and when it occurred.

You can download these instructions

along with many other manuals,

product videos and installation

software at www.lidl-service.com.

This QR code will take you directly to

the Lidl service page (www.lidl-service.com) where

you can open your operating instructions by

entering the item number (IAN) 123456.

Service

Service Great Britain

Tel.: 0800 404 7657

E-Mail: kom[email protected]

CY

Service Cyprus

Tel.: 8009 4409

E-Mail: kom[email protected]

IAN 327372_1904

Importer

Please note that the following address is not the

service address. Please use the service address

provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

PDST 10 B3

GB

│

CY

│

9 ■

Original Declaration of Conformity

We, KOMPERNASS HANDELS GMBH, document oﬃcer: Mr Semi Uguzlu, BURGSTR. 21,

44867 BOCHUM, GERMANY, hereby declare that this product complies with the following

standards, normative documents and EC directives:

Machinery Directive

(2006/42/EC)

Type/appliance designation:

Air hose reel PDST 10 B3

Year of manufacture: 09 - 2019

Serial number: IAN 327372_1904

Bochum, 24/09/2019

Semi Uguzlu

- Quality Manager -

We reserve the right to make technical changes in the context of further product development.

PDST 10 B3

■ 10

│

GB

│

CY

PDST 10 B3

HR

│

11 ■

Sadržaj

Uvod ..............................................................12

Namjenska uporaba .............................................................. 12

Oprema .......................................................................12

Opseg isporuke ..................................................................12

Tehnički podaci .................................................................. 12

Sigurnosne napomene ................................................13

Preostali rizik .......................................................14

Prije uključivanja ....................................................14

Montaža ...........................................................14

Pronalaženja mjesta za montažu ....................................................14

Montaža koluta s pneumatskim crijevom ..............................................15

Puštanje u rad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Priključivanje koluta s pneumatskim crijevom na izvor komprimiranog zraka ...................15

Priključivanje koluta s pneumatskim crijevom na pneumatski alat ............................15

Korištenje koluta s pneumatskim crijevom ..............................................15

Odmatanje crijeva ...............................................................16

Namatanje crijeva ...............................................................16

Postavljanje zaustavljača crijeva .....................................................16

Održavanje i čišćenje .................................................16

Zbrinjavanje ........................................................17

Jamstvo tvrtke Kompernass Handels GmbH ..............................17

Servis .............................................................18

Uvoznik ............................................................18

Originalna izjava o sukladnosti ........................................19

PDST 10 B3

■ 12

│

HR

BUBANJ S PNEUMATSKIM

CRIJEVOM PDST 10 B3

Uvod

Čestitamo na kupnji Vašeg novog uređaja. Time

ste se odlučili za vrlo kvalitetan proizvod. Upute

za uporabu dio su opreme ovog proizvoda. One

sadrže važne napomene za sigurnost, rukovanje i

zbrinjavanje. Prije uporabe proizvoda upoznajte se

sa svim napomenama za rukovanje i svim sigurnos-

nim napomenama. Proizvod koristite isključivo na

opisani način i u navedenim područjima uporabe.

U slučaju predaje proizvoda trećim osobama

predajte i svu dokumentaciju.

Namjenska uporaba

Kolut s pneumatskim crijevom služi zajedno s

kompresorom za opskrbu pneumatskog alata.

Kolut s pneumatskim crijevom koristi se isključivo za

transport komprimiranog zraka. Nije pogodan za

transport tekućina. Proizvod koristite isključivo na

opisani način i u navedenim područjima uporabe.

Ove upute dobro sačuvajte. U slučaju predaje

proizvoda trećim osobama priložite i također

predajte i svu dokumentaciju. Zabranjena je i po-

tencijalno opasna svaka uporaba koja odstupa od

namjenske uporabe. Oštećenja nastala zbog zane-

marivanja ili zlouporabe nisu pokrivena jamstvom i

proizvođač za njih ne snosi odgovornost. Uređaj je

dizajniran za kućnu uporabu i ne smije se koristiti u

komercijalnim ili industrijskim okruženjima.

Simboli na alatu na komprimirani zrak:

WARNING!

Prije uključivanja uređaja pročitajte

upute za uporabu.

Nosite masku za zaštitu od prašine.

Nosite zaštitu za oči.

Nosite zaštitu od buke.

Nosite zaštitne rukavice

Oprema

Kućište bubnja

Okretni priključni nosač

Kuka za vješanje

Zaustavljač crijeva

Pneumatsko crijevo za pneumatski alat

Brza spojka

Priključak komprimiranog zraka

Vijci

Vijci za pričvršćivanje

Montažni pribor

Montažni vijci

Tiple

Opseg isporuke

1 bubanj s pneumatskim crijevom

1 montažni pribor (2x montažni vijci, 2x tiple)

1 upute za uporabu

Tehnički podaci

Radni tlak maks. 10 bara

Sustav namatanja Automatski

Duljina pneumatskog crijeva 10 m

Veličina pneumatskog

priključka 1/4“ = 6,35 mm

Težina 1855 g

PDST 10 B3

HR

│

13 ■

WARNING!

Sigurnosne napomene

UPOZORENJE!

► PRIJE UPORABE PAŽLJIVO PROČITAJTE

UPUTE ZA UPORABU. UPUTE SU SASTAVNI

DIO UREĐAJA I MORAJU BITI DOSTUPNE

U BILO KOJEM TRENUTKU!

■ Ovaj uređaj smiju koristiti osobe stare 16 godina

ili više, kao i osobe smanjenih ﬁzičkih, osjetilnih

ili mentalnih sposobnosti ili s nedovoljno iskustva

i/ili znanja, ako su pod nadzorom ili su primile

poduku o sigurnom rukovanju uređajem te su

razumjele opasnosti koje proizlaze iz uporabe

uređaja. Djeca se ne smiju igrati uređajem.

Čišćenje i korisničko održavanje ne smiju obav-

ljati djeca bez odgovarajućeg nadzora.

■ Zajedno s kompresorom, kolut s pneumatskim

crijevom služi za opskrbu pneumatskog alata

energijom. Kolut s pneumatskim crijevom koristi

se isključivo za transport komprimiranog zraka.

Nije pogodan za transport tekućina.

■ Kolut s pneumatskim crijevom je zbog naprave

predviđen za montažu na prikladan zid ili strop;

uporaba bez montaže nije dopuštena.

■ Kolut s pneumatskim crijevom nije razvijen za

komercijalnu, industrijsku ili obrtničku uporabu.

Ovaj je proizvod predviđen samo za privatnu

uporabu. Kolut s pneumatskim crijevom smije se

koristiti isključivo u skladu s namjenom. Svaka

druga i drugačija uporaba je zabranjena!

■ Dio namjenske uporabe je pridržavanje sigur-

nosnih uputa sadržanih u uputama za uporabu,

kao i uputa za montažu. Za štete nastale uslijed

nenamjenske ili pogrešne uporabe, proizvođač

i prodavač ne preuzimaju nikakvu odgovornost.

■ Smije se koristiti samo pribor prikladan za ovaj

proizvod. Osobe koje koriste kolut s pneumat-

skim crijevom i po potrebi obavljaju radove

održavanja, obvezne su upoznati se s istim.

Nadalje, moraju biti informirane o potencijalnim

opasnostima. Potrebno je valjano i savjesno

pridržavati se važećih propisa o sprječavanju

nezgoda.

■ Svaka izmjena koluta s pneumatskim crijevom

isključuje odgovornost proizvođača za pritom

nastale štete.

■ Kolut s pneumatskim crijevom prije upotrebe

montirajte kako biste smanjili rizik od ozljeda.

■ Kolut s pneumatskim crijevom koristite isključivo

s komprimiranim zrakom. Nije dopušteno koristi-

ti kolut s pneumatskim crijevom za tekućine.

■ Uvijek pustite da se crijevo kontrolirano namota,

jer je kolut s pneumatskim crijevom opremljen

zateznom oprugom i mehanizmom za namata-

nja. Ako se ispravno ne koristi, crijevo koje se

namata može dovesti do ozljeda. Ako je meha-

nizam za namatanje oštećen, odmah prestanite

koristiti kolut s pneumatskim crijevom i predajte

ga stručnjaku na popravak. Nikada sami ne

otvarajte kućište koluta s pneumatskim crijevom.

■ Koristite samo pribor u besprijekornom stanju,

namijenjen za uporabu s kolutom s pneumat-

skim crijevom.

■ Nikada ne prekoračujte maksimalni radni tlak

koluta s pneumatskim crijevom ili korištenog

pneumatskog alata.

■ Kolut s pneumatskim crijevom smije se priključiti

samo na vodove za komprimirani zrak ako je

osigurano spriječavanje prekoračenja maksimal-

nog dopuštenog radnog tlaka za više od 10 %

(npr. pomoću redukcijskog ventila).

■ Pneumatsko crijevo uvijek držite podalje od

oštrih rubova, topline i ulja.

■ Uvijek provjerite pneumatsko crijevo prije

korištenja koluta s pneumatskim crijevom.

■ Kolut s pneumatskim crijevom koristite samo

zajedno s kompresorom. Zabranjen je rad

s cilindrima s komprimiranim zrakom.

■ Zabranjena je uporaba pneumatskih alata

sa zapaljivim plinovima. Postoji opasnost od

eksplozije!

■ Kolut s pneumatskim crijevom ne smije se koristiti

u druge svrhe.

■ Kolut s pneumatskim crijevom držite izvan

dohvata djece.

PDST 10 B3

■ 14

│

HR

■ Nikada ne usmjeravajte kolut s pneumatskim

crijevom odnosno njegovo crijevo na ljude ili

životinje.

■ Za popravke koristite samo originalne rezervne

dijelove. Neoriginalni rezervni dijelovi mogu

prouzročiti ozbiljna oštećenja.

■ Tijekom izvođenja radova na održavanju, po-

stavljanju i popravaka, uvijek prvo odvojite kolut

s pneumatskim crijevom od izvora komprimira-

nog zraka.

■ Zabranjene su izmjene koluta s pneumatskim

crijevom.

■ Kolut s pneumatskim crijevom koristite samo u

besprijekornom stanju. U slučaju dvojbe, prije

uporabe se posavjetujte sa stručnjakom.

■ Popravke uređaja smiju obavljati isključivo kvali-

ﬁcirani stručnjaci.

■ Nikada ne transportirajte kolut s pneumatskim

crijevom držeći ga za crijevo.

■ Crijevo uvijek čvrsto držite u ruci kada ga odva-

jate od izvora komprimiranog zraka ili pneumat-

skog alata.

■

Oprez Upozorenje:

Mogućnost strujnog udara!

Ne otvarati kućište proizvoda!

Preostali rizik

Čak i ako uređaj propisno koristite, uvijek postoje

preostali rizici. Zbog dizajna i izvedbe ovog koluta

s pneumatskim crijevom mogu nastati sljedeće

opasnosti:

– Opasnost od nasumičnog udaranja pneumat-

skog crijeva.

– Opasnost od pada uslijed nasumičnog lamata-

nja pneumatskog crijeva.

Smanjite preostali rizik pažljivim i ispravnim korište-

njem uređaja.

Prije uključivanja

■ Izvadite sve dijelove iz pakiranja i provjerite

jesu li kolut s komprimiranim zrakom ili pojedi-

načni dijelovi slučajno oštećeni. U slučaju ošte-

ćenja ne koristite kolut s pneumatskim crijevom.

Obratite se servisu proizvođaču preko navede-

ne adrese servisa.

■ Uklonite sve zaštitne folije i ostalu transportnu

ambalažu.

■ Provjerite potpunost isporuke.

Montaža

Pronalaženja mjesta za montažu

■ Kolut s pneumatskim crijevom montirajte na

prikladan strop ili zid. Uporaba koluta s pneu-

matskim crijevom bez montaže nije dopuštena.

■ Odaberite mjesto za montiranje koluta s

pneumatskim crijevom tako da ne predstavlja

prepreku.

■ Prilikom montaže na strop treba obratiti pažnju

na visinu ugradnje od najmanje 2,5 metra.

■ Za ugradnju su potrebni sljedeći alati: bušilica,

prikladno svrdlo i odvijač.

PDST 10 B3

HR

│

15 ■

Montaža koluta s pneumatskim

crijevom

UPOZORENJE!

OPASNOST OD OZLJEDA!

► Nepravilna montaža koluta s pneumatskim

crijevom može uzrokovati ozljede.

■ Provjerite da na mjestu instalacije nema cijevi ili

vodova. Ako je potrebno, koristite detektor ili se

obratite stručnjaku.

■ Obratite također pažnju na sigurnosne napo-

mene korištene bušilice.

NAPOMENA!

OPASNOST OD OŠTEĆENJA!

► Neispravna montaža može uzrokovati

oštećenja.

■ Pazite da nosivi materijal na mjestu montaže

može nositi težinu koluta s pneumatskim crije-

vom. U slučaju pitanja, obratite se stručnjaku.

1. Kao predložak koristite okretni priključni nosač

. Okretni priključni nosač možete odvojiti

od koluta s pneumatskim crijevom odvrtanjem

oba vijka u smjeru obrnutom od smjera

kazaljke na satu (vidi sliku C).

Označite položaj rupa na podlozi pomoću

olovke.

2. Izbušite rupe potrebne za ugradnju u podlogu.

3. Montirajte priključni nosač

odgovarajućim

materijalom za pričvršćivanje (vidi montažni

pribor ).

4. Kolut s pneumatskim crijevom ponovno pričvrstite

na priključni nosač

.

U tu svrhu vijke , koje ste ukloniti u 1. koraku,

ponovno zategnite u smjeru kazaljke na satu.

(vidi sliku C)

Puštanje u rad

Priključivanje koluta s pneumatskim

crijevom na izvor komprimiranog

zraka

♦ Umetnite pneumatski priključak koluta s

pneumatskim crijevom u brzu spojku izvora

komprimiranog zraka.

Priključivanje koluta s pneumatskim

crijevom na pneumatski alat

NAPOMENA!

OPASNOST OD OŠTEĆENJA!

► Nepravilno rukovanje kolutom s pneumatskim

crijevom može uzrokovati oštećenja.

■ Uvijek pazite na maksimalni radni tlak koluta s

pneumatskim crijevom i kompatibilnost korište-

nih priključaka. Pomoću brze spojke pneu-

matskog crijeva moguće je crijevo brzo spojiti

na ulaz za zrak na pneumatskom alatu.

Korištenje koluta s pneumatskim

crijevom

UPOZORENJE!

OPASNOST OD OZLJEDA!

► Kolut s pneumatskim crijevom opremljen je

povratnim mehanizmom. Tim mehanizmom

upravlja jaka opruga. U slučaju neispravnog

namatanja pneumatskog crijeva

može

doći do ozljeda.

■ Nikada ne dopustite da se pneumatsko crijevo

nekontrolirano povlači u kolut.

■ Ako je povratni mehanizam oštećen, odmah

prestanite koristiti kolut s pneumatskim crijevom.

Nastalu štetu mora popraviti stručnjak.

■ Kolut s pneumatskim crijevom posjeduje mehani-

zam za zaključavanje i povratni mehanizam. To

omogućava jednostavno izvlačenje i ponovno

namatanje pneumatskog crijeva

.

PDST 10 B3

■ 16

│

HR

■ Mehanizam za zaključavanje prilikom namata-

nja i odmatanja stvara zvuk čegrtaljke. To nije

greška. Ako se zvuk promijeni nakon velikog

broja korištenja i / ili ako postoje problemi s

mehanizmom, potražite stručnu pomoć ili kon-

taktirajte službu za korisnike.

Odmatanje crijeva

♦ Pažljivo povucite pneumatsko crijevo do že-

ljene radne duljine za pneumatski alat iz kućišta

koluta. Ako pneumatsko crijevo pustite nakon

klika, mehanizam će ga zaključati na toj duljini.

Namatanje crijeva

♦ Kratkim povlačenjem pneumatskog crijeva

možete otpustiti mehanizam za zaključavanje.

♦ Pritom pazite da se pneumatsko crijevo

kontrolirano namata u kućištu koluta

.

Postavljanje zaustavljača crijeva

Položaj zaustavljača crijeva moguće je posta-

viti i prekida namatanje pneumatskog crijeva

na željenoj duljini. Za postavljanje zaustavljača

crijeva potreban je križni odvijač (nije u opsegu

isporuke).

♦ Otpustite vijke za pričvršćivanje

pomoću

križnog odvijača (vidi sliku D).

♦ Gurnite zaustavljač crijeva

duž pneumatskog

crijeva

u željeni položaj.

♦ Ponovno zategnite vijke za pričvršćivanje

.

Održavanje i čišćenje

NAPOMENA

► Za ispravan rad i usklađenost sa sigurnosnim

zahtjevima, kolut s pneumatskim crijevom tre-

ba redovno održavati i popravljati. Neispra-

van i nepravilan rad može uzrokovati kvarove

i oštećenja uređaja.

■ Nikada ne koristite oštra i / ili abrazivna sred-

stva za čišćenje ili otapala. Ista mogu oštetiti

plastične dijelove koluta s pneumatskim crije-

vom.

■ Pazite da u unutrašnjost koluta s pneumatskim

crijevom nikada ne prodre voda. Pazite da na

kućištu i pneumatskom crijevu nema prašine i

prljavštine. U tu svrhu kolut s pneumatskim

crijevom redovito obrišite čistom krpom.

■ Prije vraćanja pneumatskog crijeva u kućište,

ako je moguće, očistite pneumatsko crijevo

za daljnju uporabu.

■ Periodično očistite kolut s pneumatskim crijevom i

crijevo vlažnom krpom s malo mekanog sapuna.

■

PDST 10 B3

HR

│

17 ■

Zbrinjavanje

Ambalaža se sastoji od materijala

neškodljivih za okoliš. Možete je

zbrinuti u mjesnim kontejnerima za

recikliranje.

Uređaj ne bacajte u standardni kućanski

otpad!

O mogućnostima zbrinjavanja starih uređaja možete

saznati u gradskom ili općinskom poglavarstvu.

Ambalažu zbrinite na ekološki prihvat-

ljiv način.

Pazite na oznake na različitim materi-

jalima ambalaže i po potrebi ih zbrinite

odvojeno. Materijali ambalaže ozna-

čeni su kraticama (a) i brojkama (b)

sljedećeg značenja:

1–7: Plastika,

20–22: Papir i karton,

80–98: Kompozitni materijali.

O mogućnostima zbrinjavanja starih

uređaja možete se raspitati u grad-

skom ili općinskom poglavarstvu.

Jamstvo tvrtke

Kompernass Handels GmbH

Poštovani kupci,

Za ovaj uređaj odobrava se jamstvo u trajanju od

3 godine od datuma kupnje. U slučaju nedostataka

ovoga proizvoda, Vama pripadaju zakonska prava

na teret prodavača proizvoda. U nastavku izlože-

no jamstvo ne ograničava ova zakonska prava.

Uvjeti jamstva

Jamstveni rok započinje danom kupnje. Molimo,

sačuvajte račun. Potreban je kao dokaz o kupnji.

Ako u roku od tri godine od datuma kupnje ovog

proizvoda nastupi greška na materijalu ili tvornička

greška proizvod će biti - po našem izboru - za Vas

besplatno popravljen ili zamijenjen, ili će Vam se

vratiti novac. Za takvo ispunjenje jamstvene obveze

potrebno je unutar trogodišnjeg roka predočiti

uređaj s nedostatkom i dokaz o kupnji (račun), te

pisanim putem ukratko opisati u čemu se sastoji

greška proizvoda i kada se pojavila.

Ako je kvar pokriven našim jamstvom, poslat ćemo

Vam popravljen ili novi proizvod. Popravkom ili za-

mjenom proizvoda ne započinje novi jamstveni rok.

Jamstveni rok i zakonsko pravo u slučaju

nedostataka

Korištenje prava na jamstvo ne produžuje jamstveni

rok. To vrijedi i za zamijenjene i popravljene

dijelove. Štete i nedostatke koji eventualno postoje

već prilikom kupnje treba javiti neposredno nakon

raspakiranja. Nakon isteka jamstvenog roka izvrše-

ni popravci se naplaćuju.

Pagina se încarcă ...

Parkside PDST 10 B3 Instructions Manual

Parkside PDST 10 B3 Instructions Manual

Lucrări conexe

Alte documente