4
english
JABRA ARROW
CHARGe YoUR HeADset
Make sure that your headset is fully charged for two hours before
you start using it. Use one of the charging solutions provided in
the box. When the light is solid, your headset is charging. When
the headset is fully charged the light is then turned o.
Use only the charger provided in the box – do not use chargers
from any other devices as this may damage your headset.
Please note: The lifetime of the battery will be signicantly
reduced if your device is left uncharged for a long period. We
therefore recommend that you recharge your device at least once
a month.
tURnInG YoUR HeADset on AnD oFF
- Slide the on/o button forward on the side of the headset to
turn on the headset. The LED will ash for a second when the
headset is on.
- Slide the on/o button backward to turn o the headset.
PAIRInG It WItH YoUR PHone
Headsets are connected to phones using a procedure called
‘pairing’. By following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
1 Put the headset in pairing mode
- When you turn on your Jabra ARROW for the rst time, the
headset will automatically start up on pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the light is solid.
2 Set your
phone to ‘discover’ the Jabra ARROW
- Follow your phone’s instruction guide. First make sure that
is activated on your mobile phone. Then set your
phone to discover new devices. This usually involves going
to a ‘setup,’ ‘connect’ or ‘
’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a
device.*
* Phone dependent