13
Before the first use
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with warm water as
follows:
1. Open water tank cover, fill water into water tank, water level should not exceed the “MAX” mark
in water tank. Then replace the water tank cover.
Note: the appliance is supplied with a detachable water tank for easy cleaning, you can fill water tank
with water first, and then attach water tank into the appliance.
2. Set steel mesh into metal funnel (no coffee in steel mesh), make sure the tube on the funnel aligns
with groove in the appliance, then insert the funnel into the appliance from the “INSERT” position, and
fix them into coffee maker firmly by turning it anticlockwise until it is at the “LOCK” position.
3. Place an jug on removable cup shelf. Make sure steam control knob is on the OFF position.
4. Connect into power source, press power button, power indicator is illuminated white, The indicators of
1- cup coffee button, 2-cup coffee button,manual coffee button and steam button flash, the machine
begins preheating, after all indicators are solidly on, the preheating is completed
Note: if preheating is not completed yet, press 1-cup coffee button, 2-cup coffee button or manual
coffee button, the pump does not work;if you want to make steam,press the steam button.
5. Press Manual coffee button, the unit will pump water for about 30s, pour out water in the cup then
clean them thoroughly, now the appliance is ready for making coffee.
Note: There may be noise when pumping water for the first time, it is normal that the appliance is
releasing the air inside. After about 20s, the noise will disappear.
Note: Before the first use, the button indicator will flash quickly, which indicates an alarm, because
there is no water in the boiler. Press the manual coffee button and hold it until the pump stops
working and the alarm is deactivated. Then, the coffee brewing operation can be started.
Preheating
To make a cup of good hot Espresso coffee, we recommend you should preheat the appliance before
making coffee, including metal funnel, steel mesh and cup, so that the coffee flavour can not be
influenced by cold parts.
1. Remove detachable water tank and open water tank cover to fill it with desired water, the water level
should not exceed the “MAX” mark in the tank. Then replace water tank
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in the
appliance, then insert the funnel into the appliance from the “INSERT” position, and fix them into
coffee maker firmly by turning it anticlockwise until it is at the “LOCK” position.
3. Place an espresso cup on removable cup shelf.
4. Then connect appliance to power supply. Make sure steam control knob is on the OFF position.
5. Press power button, power indicator is illuminated white, The indicators of 1- cup coffee button, 2-cup
coffee button and manual coffee button flash, the machine begins preheating, after all indicators are
solidly on, it means that preheating is completed, press Manual coffee button, the machine pumps
water, when there is water flowing out, press this coffee button again to stop pumping water
immediately. The purpose of this step is to pump the water of water tank into boiler.
6. When coffee button indicator is illuminated, it indicates the preheating is finished
Make espresso
1. Remove funnel by turning it clockwise. Add ground coffee into steel mesh with measuring spoon, a
spoon of ground coffee powder can make about a cup of top-grade coffee, then press ground coffee
powder tightly with the tamper.
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in the
appliance, then insert the funnel into the appliance from the “INSERT” position, and fix them into
coffee maker firmly by turning it anticlockwise until it is at the “LOCK” position.
3. Place a cup on removable cup shelf.
4. After preheating is completed, press 1-cup or 2-cup coffee button, the product will start brewing,
working time for 1-cup coffee is 15 seconds and 25 seconds for 2-cup coffee . if you want to get the
amount of coffee you like, press manual coffee button once, when your desired quantity of coffee is