Whirlpool AMD 054 Manualul utilizatorului

Tip
Manualul utilizatorului

Acest manual este potrivit și pentru

Gebrauchsanweisung
Instructions for use
Mode d’emploi
Gebruiksaanwijzing
Istruzioni per l’uso
Brugsanvisning
Bruksanvisning
Käyttöohje
Manual de utilização
Instrucciones para el uso
Instrukcje użytkowania
Használati utasítás
ИнструкциЯ за употреба
Návod k použití
Návod na použitie
Instruc∑iuni de utilizare
Инструкции по эксплуатации
3
ENGLISH Instructions for use Page 4
POLSKI Instrukcje użytkowania Strona 29
ČESKY Návod k použití Strana 54
SLOVENSKY Návod na použitie Strana 79
MAGYAR Használati utasítás Oldal 104
РУCCКИЙ
Инcтpyкции по экcплyaтaции Cтpaницa
129
БЪЛГAРCКИ
Инcтpyкция зa yпoтpeбa Cтpaницa
154
ROMANA Instrucţiuni de utilizare Pagina 179
AMD 054
AMD 055
BEFORE USING THE APPLIANCE
To make the most out of your new appliance, please read the user instructions carefully and keep them
handy for future consultation.
SAFETY PRECAUTIONS
The Installation and service/repair must be
performed by a qualified technician, in
compliance with the producer's instructions and
following local safety norms. Do not repair or
replace any parts of the appliance unless it is
specifically written in the user instructions.
Do not pull the power supply cord to remove it
from the socket. Do not twist or press the
power supply cord, and make sure it is not
broken.
Do not touch the power plug, circuit breaker
and emergency button when your hands are
wet.
Do not insert your fingers or foreign substances
into the air inlet/outlet of indoor&outdoor unit.
Never block the air inlet or outlet of indoor and
outdoor unit.
Physically or mentally disabled people, children
and people without any experience with the
product are only allowed to use the appliance if
they have had specific training on how to
operate the appliance by a person responsible
for their security and well-being. The appliance
is not intended for use by disabled people and
very young children without supervision.
Children should be supervised to ensure that
they do not play with the appliance (including
remote control).
4
AIR CONDITIONER PRECAUTIONS
Please strictly follow the below instructions:
Long and direct exposure to cool air might be
harmful to health. It is advisable to set the
louvers in order to avoid direct cool air and
deflect it within the room.
Upon malfunctioning first turn the appliance off
by pressing the ON/OFF button on the remote
control, then disconnect it from power supply.
Do not switch the appliance on and off too often
as this can damage the appliance.
Do not place any objects on the outdoor unit.
Disconnect the air conditioner from the power
supply if it is to be left unused for a long period
of time or during a thunder/lightning storm.
This product contains Fluorinated Greenhouse
Gases covered by the Kyoto Protocol, the
refrigerant gas being in a hermetically sealed
system. Refrigerant gas: R410a has a Global
Warming Potential (GWP) 1975.
This appliance has been made of recyclable or
re-usable material. Scrapping must be carried
out in compliance with local waste disposal
regulations. Before scrapping it, make sure to
cut off the mains cord so that the appliance
cannot be re-used.
For more detailed information on handling and
recycling of this product, contact your local
authorities who deal with the separate collection
of rubbish or the shop where you bought the
appliance.
SCRAPPING OF PACKAGING
The packaging can be 100% recycled as
confirmed by the recycling symbol . The
various parts of the packaging must not be
dispersed in the environment, but must be
scrapped in line with local authority regulations.
SCRAPPING OF APPLIANCE
This appliance is marked according to the
European Directive 2002/96/EC, Waste
Electrical and Electronic Equipment (WEEE).
By ensuring that this product is disposed of
correctly, you will help to prevent potentially
negative consequences for the environment and
for human health.
The symbol on the product or on the
documents accompanying the product indicates
that this appliance should not be treated as
household waste, but must be given to the
appropriate local gathering place where electric
and electronic appliances are stored and
recycled.
SAFEGUARDING THE ENVIRONMENT
5
PRODUCT DESCRIPTION
Indoor unit
1. Air Intake
2. Front Panel
3. Display panel
4. Air Outlet
5. Electrical box
6. On/off switch
7. Vertical Adjustment Louver
8. Horizontal Adjustment Louver
9. Air Filter
10. Remote Control
Outdoor unit
11. Air Intake
12. Pipes and Power Connection Cord
13. Drain Hose
14. Air Outlet
Images in the user instructions are based on external views of standard models, shape and design vary
according to the model.
6
CONTROL PANEL DISPLAY INDICATORS
DESCRIPTION
Temperature indicator (1)
Displays set and room temperature.
Running indicator (2)
It lights up in white when connecting to power supply.
It lights up in white during operation.
Heating indicator (3)
It lights up during heating mode.
Cooling indicator (4)
It lights up during cooling mode.
Dehumidifying indicator (5)
It lights up during Dehumidifying mode
Super Silent indicator (6)
It lights up during Super Silent mode
Signal Receptor (7)
7
REMOTE CONTROL FUNCTIONS
AND INDICATORS
1. ON/OFF BUTTON
Starts and/or Stops the appliance by pressing
this button.
2-3. TEMPERATURE SETTING BUTTONS
Used to set temperature.
Used to set time for clock.
Used to set time in timer mode.
4. MODE BUTTON
Used to select the operation mode.
5. BUTTON
Used to set 6th sense operation.
6. BUTTON
Used to set or cancel around U operation
7. FAN BUTTON
Used to select fan speed.
8. SWING BUTTON
Used to stop or start vertical adjustment
louver swinging and sets the desired
up/down airflow direction.
9. POWER SAVE BUTTON
Used to set or cancel power save operation
10
T-ON/T-OFF BUTTON
Used to set or cancel the timer operation.
11. JET and LIGHT BUTTON
Used to start or stop the fast cooling and
heating operation.
Used to turn on/off display light on indoor
unit.
12. INFO °C BUTTON
Used to display room temperature or set
temperature on indoor unit control panel.
13. AUTO CLEAN BUTTON
Used to set or cancel auto clean operation.
14. CLOCK BUTTON
Used to set the current time.
15. SLEEP BUTTON
Used to set or cancel Sleep operation.
16. SUPER SILENT BUTTON
Used to set or cancel the super silent
operation.
23
1
5
6
4
8
11
14
12
9
7
15
10
13
16
8
9
INDICATOR SYMBOLS ON RC DISPLAY
Cooling indicator
Dehumidifying indicator
Fan only indicator
Heating indicator
Auto fan speed
High fan speed
Medium-High fan speed
Medium fan speed
Low-Medium fan speed
Low fan speed
Auto clean indicator
Swing indicator
Lock indicator
Cold plasma generation indicator
indicator
Sleep indicator
Around U indicator
Jet indicator
Signal transmission
Display set timer
Display current time
Temperature display
Set temperature dispaly indicator
Room temperature display indicator
Front panel display light on indicator
Super silent indicator
Anti-freeze indicator
FAN
FAN
FAN
FAN
°F
1
FAN
FAN
STORAGE AND TIPS FOR USING THE
REMOTE CONTROL
How to insert the batteries
1. Gently press down on the battery cover and
push in the direction of the arrow to remove, as
shown.
2. Put 2 AAA batteries (1.5V) into the
compartment. Ensure that "+" and "-" polarity is
correctly positioned.
3. Close the battery cover on the remote control.
How to remove the batteries
Remove the battery cover in the direction of the
arrow.
Press the positive pole of the battery softly with
your fingers, then draw the batteries out of the
compartment.
All this should be done by adults, children are
forbidden to remove the batteries from the
remote control in order to avoid danger of
swallow.
Disposal of the batteries
Please discard the batteries as sorted municipal
waste at the accessible collection point.
Precautions
When replacing the batteries, do not use new
batteries with old batteries, or different types of
batteries as this may cause the remote control
to malfunction.
If you do not expect to use the remote control
for some time, take the batteries out to prevent
leakage of battery acid in the remote control.
Operate the remote control within effective
range. Keep the remote control at least 1 meter
from any TV set or HI-FI equipment.
• If the remote control does not work normally,
take the batteries out and reinstall after 30
seconds. If it still does not work install new
batteries.
To operate the appliance by remote control,
point the remote control at the receiving device
on the indoor unit, to ensure receiving
sensibility.
To send a message from remote control, the
symbol will flash for 1 second. On receipt
of the message, the appliance will emit a beep.
The remote control will operate the air
conditioner at a distance of up to 7m.
Each time the batteries are replaced in the
remote control, the remote control is pre-set at
6th Sense mode.
1
2
3
Signal receptor
10
OPERATING MODE DESCRIPTION
General Operation:
1. Turning on
Press On-Off button, when the appliance receives
the signal, the RUNNING indicator on indoor unit
dispaly lights up. During mode changes wait a few
seconds and repeat the operation if the appliance
does not respond at once. When setting the
heating operation, air flow will start after 2-5
minutes.
Cold Plasma Generator
This function is active when the product power on,
icon displays on remote control. It generates
hydrogen(H) and oxygen(O
2
) and neutralizes
viruses, bacteria and allergens by decomposing
such harmful particles. It creates a healthy
environment by improving the air quality in your
home and it makes you breathe better.
2. Selecting mode
Each time the Mode button is pressed, the
operation mode is changed in sequence:
6th SENSE mode
COOLING mode
DEHUMIDIFYING mode
FAN only mode
HEATING mode
3. Setting FAN speed
Each time the Fan button is pressed, the fan speed
is changed in sequence:
Auto fan speed
Low fan speed
Low-Medium fan speed
Medium fan speed
Medium-High fan speed
High fan speed
Only low fan speed is available under
Dehumidifying mode.
4. Setting temperature
+ Press once to raise temperature setting by 1 °C
- Press once to lower temperature setting by 1 °C
When pressing + or - button and hold it down,
the number will change rapidly.
Range of available set temperature: 16°C~30°C
*Note: In 6th SENSE mode the temperature
cannot be set.
FAN
FAN
FAN
FAN
FAN
FAN
Auto
11
AIRFLOW DIRECTION CONTROL
5. Airflow direction control
Vertical airflow is automatically adjusted to a
certain angle in accordance with the operation
mode after turning on the appliance. The direction
of airflow can be also adjusted to your own
requirement by pressing the Swing button of the
remote control.
Vertical airflow control (using the remote
control)
Each time the Swing button is pressed, vertical
airflow is changed in sequence:
When the vertical adjustment louver starts to
swing up and down, if this button is pressed, the
louver will stop at current position. When the
status is switched from off to , if this button is
pressed again 2 seconds later, status will switch to
off status directly; if this button is pressed again
within 2 seconds, the change of swing status will
follow the sequence stated above.
Press SWING button continuously for more than
2s, the main unit will swing back and forth from up
to down, and then loosen the button, the unit will
stop swinging and present position of louver will
be kept immediately.
Horizontal airflow control (with hands)
Turn the control rods of the horizontal adjustment
louvers to change horizontal air flow as shown.
Note: The shape of the appliance may look
different from that of the air conditioner you have
selected.
A - Do not turn the vertical adjustment louvers
manually, otherwise malfunction may occur. If
that happens, turn off the appliance first and
cut off the power supply, then restore power
supply again.
B - It is better not to let the vertical adjustment
louver tilt downward for a long time at
COOLING or DRY mode to prevent
condensed water from dripping.
control rod of horizontal
adjustment louvers
12
MODE AND FUNCTION DESCRIPTIONS
6th SENSE MODE
Press the button, will display, the appliance
enters 6th sense mode directly.
In this mode, temperature and fan speed will be
automatically set based on the actual room
temperature.
Heat pump models
Button is ineffective in Jet and Sleep mode.
Note: Temperature will not be displayed on front
panel and remote control under this mode.
What you can do in 6th sense mode
Around U function
When you press this button, will display,
remote control transmits the actual room
temperature around it to the indoor unit,
and the appliance will operate according to this
temperature to let you feel more comfortable.
Please keep the remote control in a location
where it can transmit the signal to the indoor unit
properly.
Press once to set and press again to cancel.
Indoor
temperature
Operation mode
22°C or below HEATING
22°C-26°C FAN or keep previous mode
26°C or over COOLING
Your feeling button adjustment procedure
Uncomfortable because of unsuitable
air flow volume.
Indoor fan speed alternates among High, Medium
and Low each time this button is pressed.
Uncomfortable because of unsuitable
air flow direction.
Please refer to the previous chapter "Airflow
direction control"
13
JET and LIGHT functions
Each time the JET (Light) button is is pressed, the
operation status is changed in sequence:
Under COOLING and HEATING mode:
Under other mode:
Note:
Each time the batteries are replaced in the remote
control, the RC is pre-set at Light on.
JET mode
JET mode is used to start or stop fast cooling or
fast heating.
will display on remote control under this
mode. The appliance will blow at super high fan
speed to cool or heat your room quickly and
effectively.
•In JET mode, you can set temperature and
airflow direction
Note:
Jet function is not available in 6th Sense, Fan
only, and Dehumidifying mode.
When switching the mode or changing fan
speed, this function will be canceled
automatically.
LIGHT Function
Press this button to turn on or turn off display light
on indoor unit control panel.
You can press this button to turn off the running
indicator light when the appliance is off.
will display on remote control when front panel
display lights up.
CLOCK function
You can set clock by pressing CLOCK button, then
using + and buttons to set the correct time,
press CLOCK button again, the clock is set.
Pressing CLOCK button, signal blink. Within 5
seconds, the value can be adjusted
+ Press once to raise time setting by 1 minute
Press once to lower time setting by 1 minute
if continuously press + or buttons, the number
will change rapidly.
12:00 is the default time to display after inserting
batteries.
SLEEP mode
This function gives you a more comfortable
environment for sleep. There are 3 sleep modes
for your choice.
Each time this button is is pressed, the operation
status is changed in sequence:
STANDARD SLEEP mode
will display on remote control during this
mode.
• When you set this mode under COOLING
or DEHUMIDIFYING operation, the
appliance will let the set temperature raise
for 1°C for the first hour and another 1°C for
the second hour, then remain constant.
• When you set this mode under HEATING
operation,the appliance will let the set
temperature lower 1°C for the first hour and
another 1°C for the second hour, then
remain constant.
6th SENSE SLEEP mode
will display on remote control during this
mode.
The appliance will change the set temperature
automatically according to the actual room
temperature
2
1
14
JETon / LIGHTon JEToff / LIGHTon
JEToff / LIGHTon JEToff / LIGHToff
LIGHToff
LIGHTon
STANDARD SLEEP 6th SENSE SLEEP
SLEEP mode off DIY SLEEP
DIY SLEEP mode
will display on remote control during this
mode.
This mode allows you to set your own sleep
mode.
How to set your own sleep mode
• Under this mode, press SUPER SILENT
button and hold it till the temperature display
blinks, you can see "1 hour" is displayed
under it.
• Use + and buttons to set your desired
temperature and confirm it by pressing
SUPER SILENT button.
• Then the time will automatically change to
"2 hour" and temperature display keeps
blinking, repeat above operation to set your
desired temperature for hour 3~8.
• Once you confirm the setting for hour 8,
your own sleep mode is set and the remote
control display will go back to previous
setting.
Note: During above operations, if there is no
button pressed within 10s or press "on-off"
button, "mode" button, "timer" button,"clock"
or "sleep" button, it will quit setting status
automatically and display previous setting.
How to check your own sleep mode setting
Follow above operations to enter setting status,
just press SUPER SILENT button continuously to
check the temperature for each hour.
How to change your own sleep mode setting
same as "set your own sleep mode".
Note:
Fan speed and airflow direction can be adjusted.
Under FAN only and 6th SENSE mode, this
function is not available.
Only STANDARD SLEEP is available under
Dehumidifying operation.
3
15
16
AUTO CLEAN function
Pressing this button in COOL or DRY mode,the
icon is displayed and the AUTO CLEAN
function is set. After turning off the appliance,
the indoor fan will keep running for 10 minutes
to eliminate moisture in indoor unit, thus
creating a healthy, mould-free environment. In
this period, you can press this button to stop
indoor fan directly.
Pressing this button again cancels AUTO CLEAN
function, indoor unit fan will be off directly after
turning off the appliance.
Note: AUTO CLEAN fucntion is not available in
6th SENSE,FAN only and HEATING mode.
INFO °C function
By pressing this button, you can select to display
the set temperature or room temperature on front
panel.
When the appliance is powered on for the first
time, will be displayed on remote control and
the set temperature will be displayed on control
panel.
Pressing this button, the icon on remote control
will be changed to , and the indoor room
temperature will be displayed on control panel. It
will go back to set temperature after 5 seconds or
once receiving other operation signal.
Note: only set temperature is displayed on remote
control.
POWER SAVE & ANTI-FREEZE mode
POWER SAVE mode is available under
COOLING and HEATING operation.
POWER SAVE mode under COOLING
operation
When pressing this button, "SE" will display on
front panel and remote control. The appliance will
automatically adjust the set temperature according
to the actual room temperature to let the room
temperature reach a comfortable temperature
zone (24°C ~ 28°C) as quickly as possible. This
mode consumes less energy but still gives you the
comfortable cool.
POWER SAVE mode under HEATING
operation: ANTI-FREEZE
When pressing this button, will display on
remote control, temperature is set at 8°C. This
function is designed for areas with very cold winter.
You can set this function to let the appliance
operate keeping a constant temperature of 8°C
when you are not at home, or in your chalet during
winter time not to let water tubes freeze. When
you are back home, you will not feel so cold, and
don't need to wait for a long time to get the warm
room environment after back to HEATING
operation.
Change mode or press the power save button
again to cancel this function.
Note: Fan speed and temperature can not be
adjusted under this mode.
17
TIMER function
The T-On/T-Off button allows you to set TIMER
ON function and TIMER OFF function separately.
It is convenient to set the timer on by pressing the
left side of this button to achieve a comfortable
room temperature at the time you get home. You
can also set timer off automatically to enjoy a good
sleep at night by pressing right side of this button.
How to set TIMER ON
TIMER ON button can be used to set the timer
programming as wished in order to switch on the
appliance at your desired time.
I) Press the left side of T-On/T-Off button, icon
will conceal, "ON " flashes on the LCD,
within 5 seconds, you can press the + or
buttons to select your desired time for appliance
on.
+ Press once to raise time setting by 1 minute
Press once to lower time setting by 1 minute
if continuously press + or buttons, the number
will change rapidly.
Note: If you don't set the time in 5 seconds after
you press the button, the remote control will exit
the TIMER ON mode automatically.
II) When your desired time is displayed on remote
control, press the press the left side of T- On/T-
Off button to confirm it. A "beep" can be heard"
and "ON" indicator stops flashing.
How to cancel TIMER ON
Press the left side of T-On/T-Off button again, a
"beep" can be heard and the "ON" indicator
disappears, this function has been canceled.
How to set TIMER OFF
TIMER OFF setting is similar to TIMER ON setting,
press the right side of T-On/T-Off button to set
TIMER OFF. You can make the appliance switch off
automatically at your desired time.
Note: Make sure the clock is set correctly before
doing the timer on and timer off setting.
+ Increase
Decrease
TIMER ON TIMER OFF
18
SUPER SILENT function
Press this button to let the unit operating with low
noise to get a quiet and comfortable room
environment.
will display on remote control and symbol
will be displayed on indoor unit during SUPER
SILENT mode.
Note: Super silent function will be off when
pressing FAN button.
CHILD LOCK function
Press + and buttons simultaneously to lock or
unlock the buttons of remote control.
If the remote control is locked, icon will be
displayed, and no functions can be activated by
pressing buttons.
Press + and buttons simultaneously again to
unlock it.
Switch between °C and °F
After pressing On/Off button to turn off the
appliance, you can press MODE and buttons
simultaneously to switch between °C and °F.
Note: this function is only available when the
product is off. Front panel temperature display will
change accordingly when turning on the appliance.
Factory setting is based on °C.
EMERGENCY OPERATION
Under emergency situation or when remote
control is missing, you can control the unit by
pressing the on/off swith located on the indoor
unit.
Turn on the appliance: when the unit is off, press
this button, it will start up and operate in 6th
SENSE mode.
Turn off the appliance: when the unit is on, press
this button, the unit will stop working.
on/off switch
PROTECTION
Operating condition
The protective device may trip and stop the
appliance in the cases listed below.
Noise pollution
Install the appliance at a place that can bear its
weight in order to operate more quietly.
Install the outdoor unit at a place where the air
discharged and the operation noise would not
disturb your neighbours.
Do not place any obstacles in front of the air
outlet of the outdoor unit lest it increases the
noise level.
Features of protection device
Wait at least 3 minutes before restarting the unit
after operation stops or changing mode during
operation. After connecting to power supply and
turning on the appliance immediately, a delay of 20
seconds may occur before it starts to operate. If all
operation has stopped, press ON/OFF button
again to restart. Timer should be set again if it has
been cancelled.
Features of COOLING mode
Anti-freezing
When the temperature of the indoor heat
exchanger drops to 0° or below, compressor will
stop working to protect the appliance.
Features of HEATING mode
Preheating
In order to prevent cool air blowing, 2-5 minutes
are necessary to preheat the indoor unit at
HEATING operation start. The indoor fan will not
work during preheating.
Defrosting
In HEATING operation the appliance will defrost
(de-ice) automatically to raise efficiency. This
procedure usually lasts 6-10 minutes. During
defrosting, fan stops running and "H1" will display
on front panel.
After defrosting is completeed, it returns to
HEATING mode automatically.
Heating
Outdoor air temperature is over 24°C
Outdoor air temperature is below -7°C
Room temperature is over 27°C
Cooling
Outdoor air temperature is over *43°C
Room temperature is below 21°C
Dehumidifying
Room temperature is below 18°C
MAINTENANCE
Clean front panel of Indoor Unit
1. Disconnect from the power supply
Turn off the appliance first before disconnecting
from power supply.
2. Remove the front panel
Open the front panel as shown by the arrow
(Fig. A).
Pull the slots at the side of the front panel with
force to take out the front panel (Fig. B).
3. Clean the front panel
Wipe it with a soft and dry cloth. Use lukewarm
water (below 40°C) to clean if the appliance is very
dirty. After cleaning let it dry.
4. Refit and close the front panel.
Refit and close the front panel by pushing it
downward.
Note:
Do not use substances such as gasoline or
polishing powder to clean the appliance.
Do not sprinkle water onto the indoor unit
Dangerous! Electric shock!
Clean Air filter
It is necessary to clean the air filter after using it for
about 100 hours.Clean the air filter every two weeks if
the air conditioner operates in an extremely dusty
environment.
1. Disconnect from the power supply
Turn off the appliance first before disconnecting
from power supply.
2. Take out air filter (Fig. C).
1. Open the front panel.
2. Press the handle of the filter gently.
3. Slide out the filter.
3. Cleaning the air filter (Fig. D)
If the filter is very dirty, clean it with a solution of
lukewarm water and neutral detergent.
After cleaning let it dry.
4. Refit the filter and close the front panel.
Note:
To avoid injury, do not touch the fins of indoor
unit with your fingers after removing the filter.
Do not attempt to clean the inside of the air
conditioner by yourself.
Do not clean the filter in washing machine.
Extra filters:
Your product also has a HEPA filter and a 3 in 1
combo filter. These filters remove small particles,
neutralizes viruses and allergens and eliminates
odours. To maintain the efficiency of the filters, we
advise you to replace these filters every 2-3 years
by contacting a Whirlpool Authorized Service
Centre.
Fig. A
Fig. B
Fig. C
Fig. D
19
TROUBLESHOOTING
Problem Troubleshooting
Does not work
Is there a power failure?
Is the protection device trip or fuse blown?
Is the plug loose in the socket?
Is the remote control working normally?
Check if you have set the Timer Off function.
Please wait for 3 minutes and start again, protection device may be preventing
No air blows out of
indoor unit.
Are the intakes and outlets of the indoor or outdoor unit blocked?
Is the temperature set properly?
Indoor fan will not work to prevent blowing of cold air for the first several
minutes when heating process starts.
In heating mode, indoor fan will stop air blowing during defrosting.
In dehumidify mode, the fan on the indoor unit may stop to prevent evaporation
of condensing water and rise of temperature.
Can not adjust
temperature setting
Is the appliance operating under 6th Sense or Power Save mode? Temperature
can not be adjusted under these modes.
Can not adjust Fan
speed
Is the appliance operating under dehumidifying or power save mode? Fan speed
can not be adjusted under these modes.
Ineffective control
Has there been a strong interference (from excessive static electricity discharge,
power supply voltage abnormality)? Note that operation will be abnormal, in this
case unplug from the power supply and re-plug after 2-3 seconds.
Does not operate
immediately
3 minute delay will occur when changing mode during operation.
Peculiar smell
This smell may come from another source such as furniture, cigarette etc, which
is sucked in the unit and blown out with the air.
Check the air filter if they are very dirty and clean it.
A sound of running
water
Normal behaviour caused by the flow of refrigerant in the air conditioner.
Defrosting sound in heating mode.
Cracking sound
The sound may be generated by the expansion or contraction of the front panel
due to temperature changes.
Mist sprays from
the outlet
Mist is present in the room with low temperature. Normal behaviour due to
cool air discharged from indoor unit during COOLING or DRY operation
mode.
Remote control
doesn't work
Is the remote control in range and not blocked by any obstacles?
Check the battery in the remote control. If low, replace the battery.
Check the remote control for damage.
Error code is
indicated
If error code such as E2, E4, E5, E6, F1, F2 F3, F4, F5, H3, H4, H5, HC, L9, LP,
PL, PH, appears on the indoor unit display, turn of the appliance and disconnect
from power supply, then contact the nearest Whirlpool Authorized Service
Center. (H1 and SE is not error code, H1 is the indicator of defrosting during
heating, SE is the indicator of power save function).
Operation problems are often due to minor causes, please check and refer to the
following chart before contacting the service. This may save time and unnecessary
expenses.
Note: If the problems still have, turn off the appliance and disconnect from power supply,
then contact the nearest Whirlpool Authorized Service Center. Do not attempt to move,
repair, disassemble, or modify the appliance by yourself.
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204

Whirlpool AMD 054 Manualul utilizatorului

Tip
Manualul utilizatorului
Acest manual este potrivit și pentru