LG AMNQ24GTTA0 Manual de utilizare

ENGLISH

Tiếng Việt

Please read this manual carefully before operating

your set and retain it for future reference.

CEILING CASSETTE - 1WAY

OWNER’S MANUAL

AIR

CONDITIONER

www.lg.com

MFL67798212

Rev.00_062620

*MFL67798212*

2 Indoor Unit

Table of contents

3 SAFETY PRECAUTIONS

7 PRIOR TO OPERATION

7 Preparing for Operation

7 Usage

7 Cleaning and Maintenance

7 Service

8 PART DESCRIPTION

8 Operation Indicator Lamp

9 Name and Function of Wireless Remote Controller

10 Name and function of wired remote controller(Accessory)

11 INSTALLATION INSTRUCTIONS

11 How to insert the Batteries

11 Wireless Remote Controller Maintenance

11 Operating Method

12 Installer Setting - Setting Address of Central Control

12 Installer Setting - Checking Address of Central Control

13 Installer Setting -How to enter installer setting mode

14 Installer Setting - Installer Setting Code Table

15 OWNER'S INSTRUCTION

15 Cooling Mode - Standard Operation

15 Cooling Mode - Power Cooling

16 Auto Operation Mode

17 Dehumidification Mode

18 Heating Mode

19 Fan Mode

20 TEMPERATURE SETTING/ROOM TEMPERATURE CHECKING

21 AIRFLOW SETTING

21 Up/Down Airflow Direction Control (Optional)

21 Left/Right Airflow Direction Control (Optional)

22 SUB FUNCTION

22 Auto Clean (Optional)

22 LCD Luminosity Control (Optional)

22 Celsius/Fahrenheit Switching

23 Individual vane angle control (Optional)

24 TIMER

24 Setting the Current Time

24 Sleep Timer Setting

24 On Timer Setting

25 Off Timer Setting

25 To cancel the Timer Setting

26 OPERATING INSTRUCTIONS

26 Forced Operation

26 Auto Restart Function

27 MAINTENANCE AND SERVICE

28 When the air conditioner is not going to be used for a long time.

28 Operation Tips

29 Before you call for service...

TABLE OF CONTENTS

Owner’s Manual 3

Safety Precautions

ENGLISH

To prevent injury to the user or other people and property damage, the following instructions must be

followed.

n Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified

by the following indications.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to properties only.

n Meanings of symbols used in this manual are as shown below.

Be sure not to do.

Be sure to follow the instruction.

Installation

• Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated

circuit.

- There is risk of fire or electric shock.

• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service

Center.

- Do not disassemble or repair the product. There is risk of fire or electric shock.

• Always ground the product.

- There is risk of fire or electric shock.

• Install the panel and the cover of control box securely.

- There is risk of fire or electric shock.

• Always install a dedicated circuit and breaker.

- Improper wiring or installation may cause fire or electric shock.

• Use the correctly rated breaker or fuse.

- There is risk of fire or electric shock.

• Do not modify or extend the power cable.

- There is risk of fire or electric shock.

• Do not install, remove, or re-install the unit by yourself (customer).

- There is risk of fire, electric shock, explosion, or injury.

• Be cautious when unpacking and installing the product.

- Sharp edges could cause injury. Be especially careful of the case edges and the fins on the

condenser and evaporator.

• For installation, always contact the dealer or an Authorized Service Center.

- There is risk of fire, electric shock, explosion, or injury.

• Do not install the product on a defective installation stand.

- It may cause injury, accident, or damage to the product.

WARNING

CAUTION

!

WARNING

!

Safety Precautions

4 Indoor Unit

Safety Precautions

• Be sure the installation area does not deteriorate with age.

- If the base collapses, the air conditioner could fall with it, causing property damage, product

failure, and personal injury.

Operation

• Do not let the air conditioner run for a long time when the humidity is very high and a door or

a window is left open.

- Moisture may condense and wet or damage furniture.

• Take care to ensure that power cable could not be pulled out or damaged during operation.

- There is risk of fire or electric shock.

• Do not place anything on the power cable.

- There is risk of fire or electric shock.

• Do not plug or unplug the power supply plug during operation.

- There is risk of fire or electric shock.

• Do not touch(operate) the product with wet hands.

- There is risk of fire or electrical shock.

• Do not place a heater or other appliances near the power cable.

- There is risk of fire and electric shock.

• Do not allow water to run into electric parts.

- It may cause There is risk of fire, failure of the product, or electric shock.

• Do not store or use flammable gas or combustibles near the product.

- There is risk of fire or failure of product.

• Do not use the product in a tightly closed space for a long time.

- Oxygen deficiency could occur.

• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the

product on.

- Do not use the telephone or turn switches on or off. There is risk of explosion or fire

• If strange sounds, or smell or smoke comes from product. Turn the breaker off or disconnect

the power supply cable.

- There is risk of electric shock or fire.

• Stop operation and close the window in storm or hurricane. If possible, remove the product

from the window before the hurricane arrives.

- There is risk of property damage, failure of product, or electric shock.

• Do not open the inlet grill of the product during operation. (Do not touch the electrostatic filter,

if the unit is so equipped.)

- There is risk of physical injury, electric shock, or product failure.

• When the product is soaked (flooded or submerged), contact an Authorized Service Center.

- There is risk of fire or electric shock.

• Be cautious that water could not enter the product.

- There is risk of fire, electric shock, or product damage.

• Ventilate the product from time to time when operating it together with a stove, etc.

- There is risk of fire or electric shock.

• Turn the main power off when cleaning or maintaining the product.

- There is risk of electric shock.

Owner’s Manual 5

Safety Precautions

ENGLISH

• When the product is not be used for a long time, disconnect the power supply plug or turn off

the breaker.

- There is risk of product damage or failure, or unintended operation.

• Take care to ensure that nobody could step on or fall onto the outdoor unit.

- This could result in personal injury and product damage.

Installation

• Always check for gas (refrigerant) leakage after installation or repair of product.

- Low refrigerant levels may cause failure of product.

• Install the drain hose to ensure that water is drained away properly.

- A bad connection may cause water leakage.

• Keep level even when installing the product.

- To avoid vibration or water leakage.

• Do not install the product where the noise or hot air from the outdoor unit could damage the

neighborhoods.

- It may cause a problem for your neighbors.

• Use two or more people to lift and transport the product.

- Avoid personal injury.

• Do not install the product where it will be exposed to sea wind (salt spray) directly.

- It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins,

could cause product malfunction or inefficient operation.

• If anyone other than a licensed professional installs, repairs, or alters LGElectronics air conditioning

products, the warranty is voided.

- All costs associated with repair are then the full responsibility of the owner.

Operation

• Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.)

- This could harm to your health.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer

air conditioner, not a precision refrigeration system.

- There is risk of damage or loss of property.

• Do not block the inlet or outlet of air flow.

- It may cause product failure.

• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc.

- There is risk of fire, electric shock, or damage to the plastic parts of the product.

• Do not touch the metal parts of the product when removing the air filter. They are very sharp!

- There is risk of personal injury.

• Do not step on or put anything on the product. (outdoor units)

- There is risk of personal injury and failure of product.

• Always insert the filter securely. Clean the filter every two weeks or more often if necessary.

- A dirty filter reduces the efficiency of the air conditioner and could cause product malfunction or

damage.(Grill Type)

• Do not insert hands or other objects through the air inlet or outlet while the product is operated.

- There are sharp and moving parts that could cause personal injury.

CAUTION

!

• Do not install the unit in potentially explosive atmospheres.

6 Indoor Unit

Safety Precautions

• Do not drink the water drained from the product.

- It is not sanitary and could cause serious health issues.

• Use a firm stool or ladder when cleaning or maintaining the product.

- Be careful and avoid personal injury.

• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and new

batteries or different types of batteries.

- There is risk of fire or explosion

• Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire.

- They may burn or explode.

• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not use the

remote if the batteries have leaked.

- The chemicals in batteries could cause burns or other health hazards.

• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if the

batteries have leaked.

- The chemicals in batteries could cause burns or other health hazards.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

Owner’s Manual 7

Prior to Operation

ENGLISH

1. Contact an installation specialist for installation.

2. Use a dedicated circuit.

1. Being exposed to direct airflow for an extended period of time could be hazardous to your health.

Do not expose occupants, pets, or plants to direct airflow for extended periods of time.

2. Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or

other heating devices.

3. Do not use this air conditioner for non-specified special purposes (e.g. preserving precision

devices, food, pets, plants, and art objects). Such usage could damage the items.

1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling

sharp metal edges.

2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,

leading to possible electric shock.

3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates

at a very high speed during operation. There is a possibility of injury if the unit’s power is

accidentally triggered on while cleaning inner parts of the unit.

For repair and maintenance, contact your authorized service dealer.

Service

Cleaning and Maintenance

Usage

Preparing for Operation

Prior to Operation

8 Indoor Unit

Part Description

Wireless Remote Controller

LCD Screen

(3 s)

˚C / ˚F (5 s)

Accessory

Holder(1 EA) Fixing Screw (2 EA)

Manual AAA(1.5 V)

Batteries(2 EA)

Operation Indicator Lamp

Lamp

Forced operation Button

Description Lamp Color

Cooling mode Green

Heating mode Green

Time to clean filter in cooling/heating Mode Yellowish Green

Time to clean filter when product is not operating Orange

Hot start or defrost mode before starting heating mode Green

When reservation set on Yellowish Green

*Cooling only model not support to Heating, Hot start, Defrost mode.

Part Description

Owner’s Manual 9

Part Description

ENGLISH

Name and Function of Wireless Remote Controller

(3 s)

˚C / ˚F (5 s)

Cooling Mode

Auto Mode or Auto Changeover

Dehumidification mode

Heating Mode

Fan Mode

•

Cooling Model( ), Heat Pump Model( )

Operation Mode

2

3

4

1

5

9

7

6

8

10

12

13

14

15

17

16

11

1. VANE ANGLE Button

Used to set each vane angle.

2. FUNCTION SETTING Button

Used to set or clear Auto Clean, Smart Clean,

Electric heater or Individual vane angle control.

3. ON/OFF Button

Used to turn on/off the unit.

4. JET COOL Button

Speed cooling operates super high fan speed.

5. LEFT/RIGHT AIRFLOW Button (OPTIONAL)

Used to set the desired left/right(horizontal)

airflow direction.

6. UP/DOWN AIRFLOW Button

Used to stop or start louver movement and set

the desired up/down airflow direction.

7. ON TIMER Button

Used to set the time of starting operation.

8. SLEEP TIMER Button

Used to set the time of sleeping operation.

9. SET / CLEAR Button

Used to set/clear the timer. Used to set the

current time(if it input for 3 seconds.)

10. PLASMA Button (OPTIONAL)

Used to start or stop the plasma-purification

function.

11. ROOM TEMPERATURE SETTING Button

Used to select the room temperature.

12. OPERATION MODE SELECTION Button

Used to select the operation mode.

13. INDOOR FAN SPEED SELECTION Button

Used to select fan speed in four steps low,

medium, high and chaos.

14. ROOM TEMPERATURE CHECKING Button

Used to check the room temperature.

15. OFF TIMER Button

Used to set the time of stopping operation.

16. TIMER SETTING(Up/Down)/LIGHT Button

Used to set the timer. Used to adjust the

brightness.(if it is not time adjust mode)

17. RESET Button

Used to reset the remote controller.

10 Indoor Unit

Part Description

Name and function of wired remote controller(Accessory)

1

4

5

10

11

8

7

9

2

3

6

13

12

14

15

Please attach the inform label inside of the door.

Please choose proper language depend on your

country.

※ Some functions may not be operated and displayed depending on the product type.

※ It will display strange value to the room temperature if wired remote controller is not connected.

Model : PREMTB001 (White Color)

PREMTBB01 (Black Color)

1. Operation indication screen

2. Set temperature button

•

It will set not room temperature but outlet air temperature.

3. Fan speed button

• Fan Speed have 3 Steps.

• Middle and Low step is same

4. ON/OFF button

5. Opration mode selection button

6. Wireless remote controller receiver

• Some products don't receive the wireless signals.

7. Air flow button

8. Subfunction button

9. Function setting button

10. Ventilation button

11. Reservation

12. Up,down,left,right button

• To check the indoor temperature, press

button.

13. Room temperature button

• Displays only the room temperature of the remote

controller perception.

• There is no control of room temperature.

• In case of fresh air intake unit, displays only the

temperature around remote controller.

14. Setting/Cancel button

15. Exit button

Owner’s Manual 11

Installation Instructions

ENGLISH

1. Choose a suitable place where its safe & easy

to reach.

2. Fix the holder to wall etc with the supplied

screws firmly.

3. Slide the remote controller inside the holder.

1. Remote controller should never be exposed to

direct sunlight.

2. Signal transmitter & receiver should always be

clean for proper communication. Use a soft

cloth to clean them.

3. In case some other appliances also get

operated with remote control, change their

position or consult your serviceman.

1. The signal receiver is inside the unit.

2.

Aim the remote controller towards the unit to operate

it. There should not be any blockage in between.

1. Remove the battery cover by pulling it according to the arrow

direction.

2. Insert new batteries making sure that the (+) and (-) of battery are

installed correctly.

3. Reattach the cover by sliding it back into position.

1. Always use/replace both batteries of same type.

2. If the system is not to be used for a long time, remove the

batteries to save their working life.

3. If the display screen of remote controller starts, fading replace

both of the batteries.

Operating Method

Wireless Remote Controller Maintenance

How to insert the Batteries

Installation Instructions

12 Indoor Unit

Installation Instructions

Installer Setting - Checking Address of Central Control

(3 s)

˚C / ˚F (5 s)

With the MODE button pressed, press the RESET button.

1

When FUNCTION button pressed, press RESET button

1

Press the ON/OFF button toward the indoor unit 1 time, and the indoor unit will display the set

address in the display window.

- The address display time and method can differ by the indoor unit type.

2

Reset the remote controller to use the general operation mode.

3

By using the TEMPERATURE SETTING button, set the indoor unit address.

- Setting range : 00 ~ FF

2

After setting the address, press the ON/OFF button toward the

indoor unit 1 time.

3

The indoor unit will display the set address to complete the address setting.

- The address display time and method can differ by the indoor uint type.

Reset the remote controller to use the general operation mode.

4

5

Group No.

Indoor Unit No.

Installer Setting - Setting Address of Central Control

Owner’s Manual 13

Installation Instructions

ENGLISH

Installer Setting -How to enter installer setting mode

(3 s)

˚C / ˚F (5 s)

When JET COOL button pressed, press RESET button

1

By using the TEMPERATURE SETTING button, set function code

and setting value. (Please refer the Installer Setting Code Table.)

2

CAUTION

Installer setting mode is to set the detail function of the remote controller.

If the installer setting mode is not set correctly, it can cause problems to the product, user injury or

property damage. This must be set by an certificated installer, and any installation or change that is

carried out by a non-certificated person should be responsible for the results. In this case, free service

cannot be provided.

!

Function Code

Setting Code

Press the ON/OFF button toward the indoor unit 1 time.

3

Reset the remote controller to use the general operation mode.

4

Refer to the Installer Setting Code Table on the next page.

14 Indoor Unit

Installation Instructions

Installer Setting - Installer Setting Code Table

No. Function Function Code Setting Value Remote Controller LCD

0 Mode Override

0 : Set to Master

1 : Set to Slave

1 : Standard

1

2 : Low

3 : High

4 : Super High

0 : Set to Master

Group Control 1 : Set to Slave

2 : Check Master/Slave

3 :

Set to Auxiliary heater

Auxiliary heater 4 :

Cancel Auxiliary heater

2 :

Check Auxiliary heater Installation

Installer Setting Code Table

0

1

2

Ceiling Height

Selection

Mode Override

This Function is only for Non-Auto Changeover H/P model.

Ceiling Height Selection

Indoor unit connected to wired remote controller operate as wired remote controller setting.

Group Control

This function is only for group control. Please don’t set this function in case of non-group control.

After setting Group Control of the product, turn off the power then turn it back on after 1 minute.

Auxiliary heater

This function is only applied to models with Auxiliary Heater function being activated.

2

22

00

01

11

12

13

14

20

21

22

23

24

25

2

Owner’s Manual 15

ENGLISH

Owner's Instruction

Press the ON/OFF button.

The unit will respond with beep sound.

1

Press MODE button to select Cooling Mode.

2

To lower the temperature

To raise the temperature

Set the desired temperature by pressing TEMP

button. Press ROOM TEMPERATURE CHECKING

button to check the room temperature. When setting

the desired temperature is higher than room

temperature, cooling wind isn’t blow out.

h Setting Temp. Range : 18~30 °C(64~86 °F)

3

(3 s)

˚C / ˚F (5 s)

(3 s)

˚C / ˚F (5 s)

Press the ON/OFF button.

The unit will respond with beep sound.

1

Press MODE button to select Cooling Mode.

2

Press the JET COOL button. The unit will operate in super

high fan speed in cooling mode.

h Wall mounted models operate power cooling mode for

30 minutes.

3

To cancel the Power cooling Mode press the Jet Cool button or the fan button

or the room temperature setting button again and the unit will operate in high

fan speed in cooling mode.

4

or or

Cooling Mode - Power Cooling

Cooling Mode - Standard Operation

Owner's Instruction

16 Indoor Unit

Owner's Instruction

Auto Operation Mode

(3 s)

˚C / ˚F (5 s)

Press the ON/OFF button.

The unit will respond with beep sound.

1

Press MODE button to select Auto Operation Mode.

2

During Auto Operation Mode

• If the system is not operating as desired, manually switch to another mode. The system will not

automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must

set the mode and the desired temperature again.

Set the desired temperature.

The temperature and fan speed are automatically set by the

electronic controls based on the actual room temperature.

If you feel hot or cold, press TEMPERATURE SETTING buttons for

more cooling or heating effect.

You cannot switch the indoor fan speed. It has already been set by

the Auto Operation Mode rule.

You can set desired temperature and indoor

fan speed.

Setting Temp. Range : 18~30 °C(64~86 °F)

3

Code Feel

2 Cold

1 Slightly cool

0 Neutral

-1 Slightly warm

-2 Warm

❈ Please select the code

depend on your feeling.

To lower the temperature

To raise the temperature

Owner’s Manual 17

ENGLISH

Owner's Instruction

Dehumidification Mode

(3 s)

˚C / ˚F (5 s)

Press the ON/OFF button.

The unit will respond with beep sound.

1

Press MODE button to select Dehumidification Mode.

2

Set the fan speed. You can select the fan speed in four steps - low,

medium, high, or chaos. Each time the button is pressed, the fan

speed mode is shifted.

3

During Dehumidification Mode

• If you select the dehumidification mode on the operation selection button, the indoor unit starts to run the

dehumidification function, automatically setting the room temp. and air volume to the best condition for

dehumidification based on the sensed room temp.

In this case, the setting temp. is not displayed in the Remote Controller and you are not able to control the

room temp. either.

• During the healthy dehumidification function, the air volume is automatically set according to the algorithm

responding to the current room temp. and makes the room condition healthy and comfortable even in the

high humidity season.

18 Indoor Unit

Owner's Instruction

Set the desired temperature by pressing TEMP button.

Press ROOM TEMPERATURE CHECKING button to check the room

temperature.

When setting the desired temperature is lower than room

temperature, heating wind isn’t blow out.

3

Set the fan speed again. You can select the fan speed in four

steps–low, medium, high, or chaos. Each time the button is pressed,

the fan speed mode is shifted.

4

Press the ON/OFF button.

The unit will respond with beep sound.

1

Press MODE button to select Heating Mode.

2

Heating Mode

This Function is only for H/P model.

(3 s)

˚C / ˚F (5 s)

To lower the temperature

To raise the temperature

h Setting Temp. Range in

Heating Mode : 16~30 °C

(60 °F~86 °F)

• The feature may be changed according to the type of model.

Owner’s Manual 19

ENGLISH

Owner's Instruction

Fan Mode

(3 s)

˚C / ˚F (5 s)

Set the fan speed again. You can select the fan speed in four

steps–low, medium, high, or chaos. Each time the button is pressed,

the fan speed mode is shifted.

3

Press the ON/OFF button.

The unit will respond with beep sound.

1

Press MODE button to select Fan Mode.

2

Natural Wind by the chaos Logic

• For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to chaos mode.

In this mode, the wind blows like natural breeze by automatically changing fan speed according to the

chaos logic.

During Fan Mode

• The outdoor compressor doesn't work.

Have a function to circulate the indoor as it sends out the air that doesn't have much temperature

difference with indoor.

20 Indoor Unit

Temperature Setting/Room Temperature checking

(3 s)

˚C / ˚F (5 s)

We can simply adjust the desired temperature

• Press the buttons to adjust the desired temperature

: Increase Temp. per one time pressing

: Decrease Temp. per one time pressing

Room temp: Indicate the current room temperature

Set temp: Indicate the temperature that user want to set

The cooling mode doesn't work if desired temperature is higher than

room temperature Please lower the desired temperature

The heating mode doesn't work if desired temperature is lower than

room temperature Please increase the desired temperature

Whenever press ROOM TEMPERATURE button, the room temperature

will be displayed within 5 seconds.

After 5 seconds, it turns to display the desired temperature.

Because of location of remote controller, the real room temperature and

the this displayed value can be different.

Press ROOM TEMPERATURE button for 5 seconds, temperature unit

change Celsius to Fahrenheit or Fahrenheit to Celsius.

Temperature Setting/Room Temperature checking

Pagina se încarcă ...

LG AMNQ24GTTA0 Manual de utilizare

Acest manual este potrivit și pentru

LG AMNQ24GTTA0 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente