Ubiquiti Networks UniFi UAP-AC-LITE Manual de utilizare

Marca: Ubiquiti Networks

Model: UniFi UAP-AC-LITE

Tip: Manual de utilizare

802.11ac Dual Radio

Access Point

Model: UAP-AC-LITE

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi®AP.

This Quick Start Guide is designed to guide you through

installation and includes warranty terms.

IMPORTANT:

The UAP-AC-LITE requires the UniFi Controller

v5.4 or newer, available at: downloads.ubnt.com/unifi

Package Contents

UniFi AP AC Lite Mounting Bracket Ceiling Backing Plate

Flat Head Screws

(Qty. 4)

Keps Nuts

(Qty. 4)

Screws

(Qty. 4)

Screw Anchors

(Qty. 4)

802.11ac Dual Radio

Access Point

Model: UAP-AC-LITE

Gigabit PoE (24V, 0.5A)

with Mounting Bracket

Power Cord* Quick Start Guide

Installation Requirements

• Phillips screwdriver

• Drill and drill bit (6 mm for wall-mounting or 3 mm for

ceiling-mounting)

• Optional: Drywall or keyhole saw (to cut 18 mm hole for

Ethernet cable feed)

• Cat5/6 UTP cable for indoor installations

cable and earth grounding must be used as conditions of product warranty. TOUGHCable

™

designed for outdoor installations. It is the professional installer’s responsibility to follow local

country regulations, including operation within legal frequency channels, output power, and

Dynamic Frequency Selection (DFS) requirements.

System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8/10

• Java Runtime Environment 1.8 (or above)

• Web Browser: Google Chrome (Other browsers may have

limited functionality).

• UniFi Controller software v5.4 or newer (available at:

www.ubnt.com/download/unifi)

Network Topology Requirements

• A DHCP-enabled network (for the AP to obtain an IP address

as well as for the wireless clients after deployment)

• A UniFi Cloud Key or management station running the UniFi

Controller software, located either on-site and connected to

the same Layer-2 network, or off-site in the cloud or a NOC

US-16-150W

USG-PRO-4

(DHCP Server)

Internet

UAP-AC-Lite

UAP-AC-M-PRO

UAP-AC-HD

LAN

WAN

UniFi Cloud Key

(UniFi Controller)

Remote Access too

UniFi Controllerr

Sample Network Diagram

All UniFi devices support off-site management controllers. For

setup details, see the User Guide on the website:

www.ubnt.com/download/unifi

Hardware Overview

LED

LED Color Status

White

Factory default, waiting to be integrated.

Flashing White

Initializing.

Alternating

White/Blue

Device is busy; do not touch or unplug it.

This usually indicates that a process such

as a firmware upgrade is taking place.

Blue

Indicates the device has been successfully

integrated into a network and is working

properly.

Quickly

Flashing Blue

This is used to locate an AP.

When you click Locate in the UniFi

Controller software, the LED on the AP will

flash. It will also display the location of the

AP on the map.

Steady Blue

with occasional

flashing

Indicates the device is in an isolated state

(all WLANs are brought down until an

uplink is found).

Ports

Ethernet

Port

Reset

Button

Locking Notch

Cable

Feed Plug

Locking Notch The Locking Notch will be used with the

Mounting Bracket to help secure the UniFi AP. (This is described

further in the Mounting Bracket section.)

Ethernet This Gigabit Ethernet port is used to connect the

power and should be connected to the LAN and DHCP server.

Power can be provided by a Ubiquiti Networks UniFi Switch with

PoE or Gigabit PoE adapter (included with single-pack only).

Reset The Reset button serves two functions for the UniFi AP:

• Restart Press and release the Reset button quickly.

• Restore to Factory Default Settings Press and hold the

Reset button for more than five seconds.

Alternatively, the UniFi AP may be reset remotely via a Reset

button located on the bottom of the Gigabit PoE adapter.

Cable Feed Plug If your Ethernet cable feeds along the

mounting surface, remove the Cable Feed Plug.

Mounting Bracket

Locking Tab

Locking Tab During installation, the Locking Tab on the

Mounting Bracket moves from the Initial Position to the Final

Position, where the Locking Tab fits securely into the Locking

Notch on the UniFi AP to help prevent theft.

Initial Position Final Position

Slot

Note:

If you need to remove the UniFi AP from the

Mounting Bracket, insert a paper clip in the Slot to release

the Locking Tab and turn the UniFi AP counterclockwise.

Hardware Installation

The UniFi AP can be mounted on the wall or ceiling. Perform

the steps for the appropriate installation:

Wall Mount

1. Position the Mounting Bracket at the desired location on

the wall with the arrow pointing up.

2. Use a pencil to mark the four mounting holes. Use a 6 mm

drill bit to drill the mounting holes.

Arrow

3. If your Ethernet cable feeds through the wall, then cut or

drill a circle approximately 18 mm in diameter. Then feed

the CAT5/6 cable through the hole.

25 mm

Note: 25 mm is the distance from the center of the

bottom mounting hole to the center of the cable hole.

4. Insert the Screw Anchors into the 6 mm holes. Secure the

Mounting Bracket to the wall by inserting the Screws into

the anchors.

5. If the Ethernet cable runs along the mounting surface,

remove the Cable Feed Plug.

6. Connect the Ethernet cable to the Ethernet port.

7. Align the arrow on the UniFi AP with the arrow on the

Locking Tab of the Mounting Bracket.

Arrow

Locking Tab

8. Ensure that the UniFi AP is firmly seated on the Mounting

Bracket. Turn the UniFi AP clockwise until it locks into place

and the Locking Tab fits securely into the Locking Notch.

Ceiling Mount

1. Remove the ceiling tile.

2. Place the Ceiling Backing Plate in the center of the ceiling

tile. Mark the four mounting screw holes.

3. Mark a hole approximately 18 mm in diameter for the

Ethernet cable feed.

25 mm

Note: 25 mm is the distance from the center of the

bottom mounting hole to the center of the cable hole.

4. Use a 3 mm drill bit to drill the screw holes, and cut or drill

the hole for the Ethernet cable feed.

5. Insert the Flat Head Screws through the Mounting Bracket,

ceiling tile, and Ceiling Backing Plate. Fasten the screws

using the Keps Nuts. Then feed the Ethernet cable through

the 18 mm hole.

6. Connect the Ethernet cable to the Ethernet port.

7. Align the arrow on the UniFi AP with the arrow on the

Locking Tab of the Mounting Bracket.

Locking Tab

Arrow

8. Ensure that the UniFi AP is firmly seated on the Mounting

Bracket. Turn the UniFi AP clockwise until it locks into place

and the Locking Tab fits securely into the Locking Notch.

9. Set the ceiling tile back into place.

Powering the UniFi AP

Use a UniFi Switch with PoE or a Gigabit PoE adapter for power.

Connecting to a UniFi Switch with PoE

Connect the Ethernet cable from the UniFi AP directly to a PoE

port on the UniFi Switch with PoE.

1 3 5 7 9 11 13 15 17 19 21 22

2 4 6 8 10 12 14 16 18 20 22 24

SPF1

SPF2

*640-00180-08*

640-00180-08

Connecting Power over Ethernet

The single-pack of the UAP-AC-LITE includes one Gigabit

PoE adapter. For multi-pack units, we recommend using a

UniFiSwitch with PoE.

1. Connect the Ethernet cable from the device to the

adapter’s POE port.

2. Connect an Ethernet cable from your LAN to the adapter’s

LAN port.

3. Connect the Power Cord to the adapter’s power port.

Connect the other end of the Power Cord to a power outlet.

Mounting the PoE Adapter (Optional)

1. Remove the PoE Mounting Bracket from the adapter, place

the bracket at the desired location, and mark the two holes.

2. Pre-drill the holes if necessary, and secure the bracket

using two fasteners (not included).

3. Align the adapter’s slots with the tabs of the PoE Mounting

Bracket, and then slide the adapterdown.

Software Installation

Download and install the latest version of the UniFi Controller

software. Launch it and follow the on-screen instructions. The

software and step-by-step instructions in the User Guide are

available at: www.ubnt.com/download/unifi

After you have installed the software and run the UniFi

Installation Wizard, a login screen will appear for the UniFi

Controller management interface. Enter the Admin Name and

Password that you created and click Log In..

You can manage your wireless network and view network

statistics using the UniFi Controller management interface.

For information on configuring and using the UniFi Controller

software, refer to the User Guide.

Mobile App Installation

Ubiquiti Networks also offers the UniFi mobile app, which

is available from the App Store (iOS) or Google Play

™

Store

(Android). You can use it to provision a UniFi AP for basic

functionality without configuring a UniFi Controller. It also

allows seamless provisioning of APs for remote controllers

(controllers not on the same Layer 2 network) and easy access

to local controllers and those monitored on unifi.ubnt.com

Specifications

UniFi AP AC Lite

Dimensions 160 x 160 x 31.45 mm

(6.3 x 6.3 x 1.24")

Weight

With Mounting Kits

170 g (6.0 oz)

185 g (6.5 oz)

Networking Interface (1) 10/100/1000 Ethernet Port

Buttons (1) Reset to Defaults

Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)

Power Supply 24V, 0.5A Gigabit PoE Adapter*

Max. Power Consumption 6.5W

Max. TX Power

2.4 GHz

5 GHz

20 dBm

Antennas (2) Dual-Band Antennas, 3 dBi Each

Wi-Fi Standards 802.11 a/b/g/n/ac

Wireless Security WEP, WPA-PSK,

WPA-Enterprise (WPA/WPA2, TKIP/AES)

BSSID Up to Four per Radio

Mounting Wall/Ceiling (Kits Included)

Operating Temperature -10 to 70° C (14 to 158° F)

Operating Humidity 5 to 95% Noncondensing

Certications CE, FCC, IC

* Only the single-pack of the UAP-AC-LITE includes a PoE adapter.

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Do not use this product in location that can

be submerged by water.

WARNING: Avoid using this product during an electrical

storm. There may be a remote risk of electric shock from

lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current

requirements indicated on the manufacturer’s label. Connection to a

different power source than those specified may result in improper

operation, damage to the equipment or pose a fire hazard if the

limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service

should be provided only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has

an integral safety ground wire intended for connection to a grounded

safety outlet.

a. Do not substitute the power cord with one that is not the provided

approved type. Never use an adapter plug to connect to a 2-wire

outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the

safety certification, modification or misuse can provide a shock

hazard that can result in serious injury or death.

c. Contact a qualified electrician or the manufacturer if there

are questions about the installation prior to connecting the

equipment.

d. Protective earthing is provided by Listed AC adapter. Building

installation shall provide appropriate short-circuit backup

protection.

e. Protective bonding must be installed in accordance with local

national wiring rules and regulations.

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the

product(s) furnished hereunder (the “Product(s)”) shall be free from defects

in material and workmanship for a period of one (1) year from the date

of shipment by UBIQUITI NETWORKS under normal use and operation.

UBIQUITI NETWORKS’ sole and exclusive obligation and liability under

the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion,

to repair or replace any Product that fails to conform to the above

warranty during the above warranty period. The expense of removal and

reinstallation of any Product is not included in this warranty. The warranty

period of any repaired or replaced Product shall not extend beyond its

original term.

Warranty Conditions

The above warranty does not apply if the Product:

(I) has been modified and/or altered, or an addition made thereto,

except by Ubiquiti Networks, or Ubiquiti Networks’ authorized

representatives, or as approved by Ubiquiti Networks in writing;

(II) has been painted, rebranded or physically modified in any way;

(III) has been damaged due to errors or defects in cabling;

(IV) has been subjected to misuse, abuse, negligence, abnormal

physical, electromagnetic or electrical stress, including lightning

strikes, or accident;

(V) has been damaged or impaired as a result of using third party

firmware;

(VI) has no original Ubiquiti MAC label, or is missing any other original

Ubiquiti label(s); or

(VII) has not been received by Ubiquiti within 30 days of issuance of

the RMA.

In addition, the above warranty shall apply only if: the product has been

properly installed and used at all times in accordance, and in all material

respects, with the applicable Product documentation; all Ethernet cabling

runs use CAT5 (or above), and for outdoor installations, shielded Ethernet

cabling is used, and for indoor installations, indoor cabling requirements

are followed.

Returns

No Products will be accepted for replacement or repair without obtaining

a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS

during the warranty period, and the Products being received at UBIQUITI

NETWORKS’ facility freight prepaid in accordance with the RMA process of

UBIQUITI NETWORKS. Products returned without an RMA number will not

be processed and will be returned freight collect or subject to disposal.

Information on the RMA process and obtaining an RMA number can be

found at: www.ubnt.com/support/warranty

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI

NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA,

SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM

AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND,

EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO,

REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY,

ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY,

SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS

FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY

WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR

TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES.

BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR

ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE

TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING

THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE

SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS

AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS

FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD

PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS,

DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT

CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY

OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant

that the operation of the Products will be error-free or that operation will

be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible

for damages or claims of any nature or description relating to system

performance, including coverage, buyer’s selection of products (including

the Products) for buyer’s application and/or failure of products (including

the Products) to meet government or regulatory requirements.

Limitation of Liability

EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL

UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR

DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES

(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING

OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE

PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER

LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.

Pagina se încarcă ...

Ubiquiti Networks UniFi UAP-AC-LITE Manual de utilizare

Marca: Ubiquiti Networks

Model: UniFi UAP-AC-LITE

Tip: Manual de utilizare

Descărcați PDF

raport

în alte limbi

English: Ubiquiti Networks UniFi UAP-AC-LITE User manual
italiano: Ubiquiti Networks UniFi UAP-AC-LITE Manuale utente

Ubiquiti Networks UniFi UAP-AC-LITE Manual de utilizare

Ubiquiti Networks UniFi UAP-AC-LITE Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente