LX 35 Robot Lawn Mower Manualul proprietarului

P09

P25

P42

P59

P75

P91

P107

P123

P139

P155

P171

P187

P203

P218

P234

P250

P266

P281

EN

D

F

I

ES

NL

PL

HU

RO

CZ

SK

PT

HR

SL

DK

FIN

NOR

SV

Owner’s Manual

Benutzerhandbuch

Mode d’emploi

Manuale d’uso

Manual del propietario

Gebruikershandleiding

Instrukcja obsługi

Felhasználói kézikönyv

Manual utilizator

Návod k použití

Návod na použitie

Manual de utilizador

Priručnik za upotrebu

Navodila za uporabo

Ejerens instruktionsbog

Käyttäjänopas

Brukermanuel

Bruksanvisning

LX835 LX910

Original instructions EN

Übersetzung der Originalbetriebsanleitung D

Traduction de l’instruction originale F

Traduzione dell’istruzione originale I

Traducción del manual original ES

Vertaling van de oorspronkelijke gebruiksaanwijzing NL

Tłumaczenie oryginalnej instrukcji PL

Fordítás az eredeti utasítások HU

Traducerea instrucțiunilor originale RO

Překlad originálního návodu CZ

Preklad originálneho návodu SK

Tradução da instrução original PT

Prijevod originalnih uputa HR

Prevod izvirnih navodil SL

Oversættelse af den originale brugsanvisning DK

Käännös alkuperäisestä ohjeiden FIN

Oversettelse av den opprinnelige beskrivelsen NOR

Översättning av originalinstruktioner SV

EN

D

F

I

ES

NL

PL

HU

RO

CZ

SK

PT

HR

SL

321 4

23

22

5

6

7

8

910 11

17

18

20 21

24 25 26

12

19

13

14

16

15

The picture is only for reference

Die Abbildung dient nur als Referenz

L’illustration est fournie à titre indicatif uniquement

L’immagine è a scopo esempliﬁcativo

La imagen es solo de referencia

De afbeelding dient alleen ter referentie

Rysunek jedynie dla celów referencyjnych

Az ábra csak tájékoztató jellegű

Imaginea servește doar ca referință

Obrázek je pouze informativní

Obrázok je iba informatívny

A imagem é apenas para referência

Slika je samo ilustrativne naravi

Slika je samo za referenco

DK

FIN

NOR

SV

Billedet er kun til reference

Kuva on vain viitteeksi

Bildet er kun til referanse

Bilen är endast för referens

A

C

B

DD

E1

E2 F

GH

J2

J1

J3

I1 I2

1

2

K

LM

N1 N2

OP1

P3

P5P4

P2

1

2 2

EN 9

Users can view the electronic instructions at

https://landxcape-robotics.com.

1. Product Safety

1.1 General & Additional Safety

Instruction

WARNING: Read all safety warnings and all

instructions.

Failure to follow the warnings

and instructions may result in electric shock, fire

and/or serious injury.

Carefully read the instructions for the safe

operation of the machine.

Save all warnings and instructions for future

reference.

- This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

- Children should be supervised to ensure that

they do not play with the appliance.

- This appliance contains batteries that are only

replaceable by skilled persons.

WARNING: For the purposes of recharging the

battery, only use the detachable supply unit provided

with this appliance.

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

SAFE OPERATION PRACTICES

Training

a) Read the instructions carefully. Make sure you

understand the instructions and be familiar with

the controls and the proper use of the appliance;

b) Never allow people unfamiliar with these

instructions or children to use the appliance.

Local regulations can restrict the age of the

operator;

c) The operator or user is responsible for accidents

or hazards occurring to other people or their

property.

Preparation

a) Ensure the correct installation of the boundary

wire as instructed.

b) Periodically inspect the area where the appliance

is to be used and remove all stones, sticks,

wires, bones, and other foreign objects.

c) Periodically visually inspect to see that the

blades, blade bolts and cutter assembly are not

worn or damaged. Replace worn or damaged

blades and bolts in sets to preserve balance.

d) On multi-spindle appliances, take care as

rotating one blade can cause other blades to

rotate.

e) WARNING! The lawnmower shall not be operated

without the guard in place.

OPERATION

1. GENERAL

a) Never operate the appliance with defective

guards, or without safety devices, for example

deflectors, in place.

b) Do not put hands or feet near or under rotating

parts. Keep clear of the discharge opening at all

times.

c) Never pick up or carry an appliance while the

motor is running.

d) Operate the disabling device from the appliance:

- Before clearing a blockage;

- Before checking, cleaning or working on the

appliance;

- After striking a foreign object to inspect the

machine for damage;

- If the machine starts to vibrate abnormally, and

to check for damage before restarting.

e) It is not permitted to modify the original design of

robotic lawnmower. All modifications are made

at your own risk.

f) Start robotic lawnmower according to the

instructions. When the power key is switched on,

make sure you keep your hands and feet away

from the rotating blades. Never put your hands

and feet under the mower.

g) Never lift up robotic lawnmower or carry it when

the power key is switched on.

h) Do not let persons who do not know how robotic

lawnmower works and behaves use the mower.

i) Do not put anything on top of robotic lawnmower

or its charging station.

j) Do not allow robotic lawnmower to be used with

a defective blade disc or body. Neither should it

be used with defective blades, screws, nuts or

EN10

cables.

k) Always switch off robotic lawnmower when

you do not intend to use the mower. Robotic

lawnmower can only start when the power key is

switched on and the correct PIN code has been

entered.

l) Keep your hands and feet away from the rotating

blades. Never place your hands or feet close to

or under the body when robotic lawnmower is in

operation.

m) To avoid using the machine and its

peripherals in bad weather conditions especially

when there is a risk of lightning.

n) Not to touch moving hazardous parts before

these have come to a complete stop.

o) For machines used in public areas, that warning

signs shall be placed around the working area of

the machine. They shall show the substance of

the following text:

WARNING! Automatic lawnmower! Keep away

from the machine! Supervise children!

2. ADDITIONALLY WHEN THE APPLIANCE IS

OPERATING AUTOMATICALLY

a) Do not leave the machine to operate unattended

if you know that there are pets, children or

people in the vicinity.

MAINTENANCE AND STORAGE

When the mower is turned upside down

the power key must always be switched

off.

The power key should be switched off during

all work on the mower’s underframe, such as

cleaning or replacing the blades.

a) Keep all nuts, bolts and screws tight to be sure

the appliance is in safe working condition.

b) Inspect the robotic lawnmower each week and

replace worn or damaged parts for safety.

c) Check especially that the blades and blade disc

are not damaged. Replace all blades and screws

at the same time if necessary so that the rotating

parts are balanced.

d) Ensure that only replacement cutting means of

the right type are used.

e) Ensure that batteries are charged using

the correct charger recommended by the

manufacturer. Incorrect use may result in electric

shock, overheating or leakage of corrosive liquid

from the battery.

f) In the event of leakage of electrolyte flush with

water/neutralizing agent, seek medical help if it

comes into contact with the eyes etc.

g) Servicing of the appliance should be according

to manufacturers’ instructions.

Recommendation

To connect the machine and/or its peripherals only

to a supply circuit protected by a residual current

device (RCD ) with a tripping current of not more

than 30 mA.

Residual risks

To avoid injuries, wear protective gloves when

replacing the blades.

Transport

The original packaging should be used when

transporting robotic lawnmower over long distances.

To safely move from or within the working area:

a) Press the STOP button to stop the mower.

You select the four digit PIN code when you start

the mower for the first time.

b) Always switch off robotic lawnmower if you

intend to carry the mower.

c) Carry the mower by the handle at the front under

the mower. Carry the mower with the blade disc

away from the body.

RF exposure requirements

To satisfy RF exposure requirements, a separation

distance of 200mm or more should be maintained

between this device and persons during device

operation.

To ensure compliance, operations at closer than

this distance is not recommended. The antenna

used for this transmitter must not be co-located in

conjunction with any other antenna or transmitter.

This is a class III appliances and it must only be

supplied at safety extra low voltage corresponding

to the marking on the appliance.

Safety Warnings for battery pack inside the

tool

a) Do not dismantle, open or shred battery

pack.

b) Do not short-circuit a battery pack. Do not

store battery packs haphazardly in a box or

EN 11

drawer where they may short-circuit each

other or be short-circuited by conductive

materials. When battery pack is not in use,

keep it away from other metal objects, like paper

clips, coins, keys, nails, screws or other small

metal objects, that can make a connection from

one terminal to another. Shorting the battery

terminals together may cause burns or a fire.

c) Do not expose battery pack to heat or re.

Avoid storage in direct sunlight.

d) Do not subject battery pack to mechanical

shock.

e) In the event of battery leaking, do not allow

the liquid to come into contact with the skin

or eyes. If contact has been made, wash the

affected area with copious amounts of water

and seek medical advice.

f) Keep battery pack clean and dry.

g) Recharge only with the charger specied by

LandxcapeTM. Do not use any charger other

than that specically provided for use with

the equipment.

h) Do not use any battery pack which is not

designed for use with the equipment.

i) Keep battery pack out of the reach of

children.

j) Retain the original product literature for

future reference.

k) Dispose of properly.

l) Do not mix cells of different manufacture,

capacity, size or type within a device.

m) Keep the battery away from microwaves and

high pressure.

n) Warning! Do not use non-rechargeable

batteries.

User manual requirements for wireless product

a) Operation of this device is subject to the

following two conditions:

(1) This device may not cause harmful interference,

and

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

b) Caution: Changes or modifications to this unit

not expressly approved by the party responsible

for compliance could void the user’s authority to

operate the equipment.

c) NOTE: This equipment generates, uses and

can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encouraged

to try to correct the interference by one or more

of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment

and receiver.

- Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV

technician for help.

EN12

1. CHARGING STRIPS

2. STOP BUTTON

3. CUTTING HEIGHT ADJUSTMENT HANDLE

4. RAIN SENSOR

5. REAR DRIVING WHEEL

6. CUTTING BLADE

7. FRONT WHEEL

8. USB PORT

9. BATTERY PACK *

10. BLADE TURNING DISC

11. HANDLE

12. ON/OFF KEY

13. HOME BUTTON

14. KNOB

15. START KEY

16. DISPLAY

17. CHARGING PILE

18. CHARGING BASE

19. CONTACT PINS

20. POWER ADAPTER

21. WIRE PEGS

22. BOUNDARY WIRE

23. CHARGING BASE FIXING NAILS

24. BOUNDARY WIRE DISTANCE GAUGE

25. HEX KEY

26. CONNECTOR

*Not all the accessories illustrated or described are included in

standard delivery.

Intended Use

The garden product is intended for domestic lawn mowing. It is de-

signed to mow often, maintaining a healthier and better looking lawn

than ever before. Depending on the size of your lawn, your LandxcapeTM

may be programmed to operate at any time or frequency. It is impos-

sible for digging, sweeping or snow cleaning.

2. Component List

WARNING - Robotic lawnmower can be dangerous if

incorrectly used.

Read through the Operator’s manual carefully and

understand the content before using your robotic

lawnmower.

WARNING - Keep a safe distance from the machine

when operating.

WARNING – Operate the disabling device before

working on or lifting the machine.

WARNING - Do not ride on the machine.

Do not burn

Batteries may enter water cycle if disposed

improperly, which can be hazardous for ecosystem.

Do not dispose of waste batteries as unsorted

municipal waste.

Li-Ion battery.This product has been marked with a

symbol relating to ‘separate collection’ for all battery

packs and battery pack. It will then be recycled or

dismantled in order to reduce the impact on the

environment. Battery packs can be hazardous for the

environment and for human health since they contain

hazardous substances.

Do not wash the machine with a high pressure

washer

Class III appliance

Waste electrical products must not be disposed of

with household waste. Please recycle where facilities

exist. Check with your local authorities or retailer for

recycling advice.

Read operator's manual

Detachable supply unit

1.2 Information on the LandxcapeTM

EN 13

Start

1) After the boundary wire installation, you can start using LandxcapeTM (Please refer to Installation Guide for boundary wire installation).

2) Press until LandxcapeTM turns on. For the first use, input the default PIN code 0000 by pressing for four times when the number 0 is

blinking. (The PIN code can be changed, please refer to “4.3 Setting”).

NOTE: LandxcapeTM will turn off if it does not receive any input within 30 seconds after it is turned on. If you enter wrong PIN code three times,

LandxcapeTM will raise the alarm “di-di” and then turn off.

3) Press , then press to start mowing.

4) Press then to make LandxcapeTM go to the charging station, with the blades rotating to cut grass on the way home.

LandxcapeTM will work continuously until reaching low battery power level and then it will return to the charging station. Once charging is complete,

LandxcapeTM will automatically resume mowing or it stay in the charging station according to the mowing schedule.

NOTE: When LandxcapeTM turns on, all lights on the display will be illuminated and then turn off. Check if there is any light damaged. It is

recommended to shield the display with your hand when the outdoor light gets too strong.

POWER ON/OFF

Turns

LandxcapeTM on

and off

DISABLING DEVICE

Prevents

operation of

LandxcapeTM

LOCK

BATTERY CAPACITY

Working time

START

Starts mowing/

Selects up

STANDBY PAGE:

LandxcapeTM is not in the

working hours.

SLEEP PAGE:

The icon is displayed.

LandxcapeTM is fully charged and is not in

the working hours.

DISPLAY

Displays the state of your

setting

KNOB (Function Menu)

STOP

Stops LandxcapeTM during

operation

HOME

Sends LandxcapeTM to its

charging station during

operation with the blades

rotating to cut grass on the way

home and activates charging/

Selects down

OK

Confirms any setting

3. Control panel

EN14

4. Understanding Your LandxcapeTM

Congratulations on your new purchase of LandxcapeTM and welcome

to the care-free life of automatic mowing. In the following, we want to

help you to better understand how your LandxcapeTM thinks.

4.1 How does my LandxcapeTM know what

to mow?

LandxcapeTM chooses its direction at random. It will make sure your

entire lawn is evenly mowed without leaving unattractive mowing paths

(See Fig. A).

4.2 How does my LandxcapeTM know

where to go?

Your LandxcapeTM is made to work on its own. LandxcapeTM knows

when it needs to go to its charging station to charge, can sense when

it is raining, can stop itself if it senses a problem, and knows to stop,

draw back, and turn around when it bumps into something blocking

its path. LandxcapeTM will also automatically stop its blade turning disc

from rotating if it is lifted off the ground to prevent an accident.

A. Finding the Charging station

When your LandxcapeTM needs to recharge, it will stop mowing and

follow the boundary wire in an anti-clockwise direction back to its

charging station.

B. Rain sensors

LandxcapeTM

is equipped with a rain sensor which detects rain and tells

LandxcapeTM

to stop mowing and follow the boundary wire back to its

charging station (See Fig. B).

LandxcapeTM

will resume mowing after passing the delay time. The

default delay time is 180mins.

When the rain sensors are wet,

LandxcapeTM

returns to its charging

base. When the rain sensors are dry,

LandxcapeTM

will begin the delay

time countdown. If you want to exit from the rain delay, dry the sensor

area, and perform a power cycle by operating the on/off key. After the

power cycle has been performed, you can operate again.

C. Sensing the boundary wire

LandxcapeTM always obeys the border set by the boundary wire and

uses sensors at its front to detect it. (See Fig. C)

D. Starting and stopping while mowing (See Fig. D, E1, E2)

To start mowing, press the on/off key and input the PIN code. Press

, then press . If you would like

LandxcapeTM

to stop mowing, simply

press the STOP button on top of the mower.

If

LandxcapeTM

senses something is wrong, it will display a fault message

on the display. For information on these messages, refer to "9.Error

Messages".

LandxcapeTM

will turn off if it does not receive any input from

the user within 20 minutes.

To resume:

• Press , then press

• Now LandxcapeTM will begin to mow!

4.3 Setting

Before starting your LandxcapeTM for the ﬁrst time, you should cut

the grass to the height 6 cm or lower with your ordinary lawn mower

or trimmer .Then, set the cutting height of your LandxcapeTM to its

maximum setting (6 cm) for its ﬁrst time mowing. And you can do the

program setting manually by rotating the knob.

NOTE: When doing the program setting manually, LandxcapeTM will

enter the standby page if it does not receive any input from the user

within several seconds.

Only for reference

As the picture shown above ,you can clockwise and anti-

clockwiserotate the knob.

Please be attention to the arrow on the right of the knob which points

to the function you have chosen.

(1)Change PIN code

To change the PIN code, keep pressing both and buttons at the same

time for 5 seconds. The icon will be blinking, and “ ” will

be rolling ﬂashing. After that, the ﬁrst number will be blinking, use or

to input the old PIN code and press to conﬁrm. The next number will be

blinking. Use the same method to complete other numbers. Then,” ”

will be rolling ﬂashing , the ﬁrst number will be blinking and use or to

select the number you want and press to conﬁrm. The next number will

be blinking. Use the same method to complete other numbers. For example,

the new PIN code is set to be 0326. After that, “ ” will be rolling

ﬂashing and the ﬁrst number will be blinking again. Use the same method to

input the new PIN code you set just now (in this example, ). Then “

” will be rolling ﬂashing on the display. Your PIN code has

been changed successfully.

Only for reference

EN 15

(2) Set year, date and time

Set year, date and time are compulsory setting items. If you don’t set

these items, it will inﬂuence the schedule time in the following setting.

These items should be set in the order of year, date and time.

For the year setting, rotate knob to . The icon and a number are

blinking on the display, for example, . Use or to select

the year you want. Then press to conﬁrm to ﬁnish the year setting.

Only for reference

Meanwhile, the icon will be ﬂashing again and a number will be

displayed to indicate the date, for example, , meaning September

29. When is ﬂashing, use or to select the number and press

to conﬁrm. Then will be ﬂashing. Use the same method to select

the number and press to conﬁrm to ﬁnish the date setting.

Only for reference

Meanwhile, the icon will be ﬂashing and the time will be displayed,

for example, . When is blinking, use or to to select the

number and press to conﬁrm. Then will be blinking, use the same

method to select the number and press to conﬁrm. Now the time

setting is completed and LandxcapeTM will enter the standby page.

Only for reference Standby page

(3) Change default start time

The default start time of your mower is 09:00, it can be changed anytime

by rotating knob to .When start time is selected ,the display will

show the default start time(09:00). The icon and a number are blinking

on the display. When is blinking, use or to to select the

numberand press to conﬁrm. Then will be blinking, use the same

method to select the number and press to conﬁrm. Now the start time

setting is completed and LandxcapeTM will enter the standby page.

For example, set the start time 10: 30 by using the method above, and

your LandxcapeTM will start mowing from 10: 30.

Only for reference Standby page

(4) Set working schedule

Option 1: AUTO (Recommended working schedule according to area

setting)

Rotate knob to .For example . The number will be blinking.

Use or to select the lawn area you want, and press to conﬁrm.

Only for reference

The default working time of LandxcapeTM can be found in following table:

Schedule

Area

(m2)

Sunday Monday Tuesday

Wednesday

Thursday

Friday Saturday

50 / / work* / / work* /

100 / work* / work / work* /

150 / work* work work work work* /

200 ~

1000** / work* work work work work* /

* Border cut will be done on initial mowing of the day.

** In this case,the work time from Monday to Friday is different according

to area you set.

Option 2: Set working schedule manually

You can adjust the work time easily by rotating the knob. Rotate knob to

select the working time you want. For example“ ”,which means

your LandxcapeTM will work on 3 days (Monday, Wednesday and Friday)

and lasts for 3 hours on each day.

Note: Keep the work time you have set on the knob,your LandxcapeTM will

work based on it circularly.

For example, when you set the start time at 10 am and work time on

3d3h,then your LandxcapeTM will mow circularly from 10 am to 1 pm on

Monday, Wednesday and Friday. If you start your LandxcapeTM at 2pm on

Tuesday, your LandxcapeTM will mow once only.

The following two tables are detailed information:

EN16

TABLE 1

Schedule of 3 days

Time/

per day Sunday Monday Tuesday

Wednesday

Thursday Friday Saturday

3 h / work* / work / work* /

5 h / work* / work / work* /

7 h / work* / work / work* /

9 h / work* / work / work* /

Only for reference

TABLE 2

Schedule of 5 days

Time/

per day Sunday Monday Tuesday

Wednesday

Thursday Friday Saturday

1 h / work* work work work work* /

3 h / work* work work work work* /

5 h / work* work work work work* /

7 h / work* work work work work* /

9 h / work* work work work work* /

* Border cut will be done on initial mowing of the day.

Only for reference

Note: During the operation according to the working schedule, press

and , LandxcapeTM can be forced to end work of the day .

4.4 How efficiently will my LandxcapeTM

mow the grass?

Mowing times are different for every lawn depending on the factors

mentioned below. Gradually adjust the time you allow LandxcapeTM to

mow each day until you find the most suitable setting.

Your LandxcapeTM is capable of mowing areas of different sizes,

although this depends on various factors, such as:

• Species of grass in your lawn and its growth rate

• Sharpness of the cutting blades

• Humidity

• Surrounding temperature

• Amount of obstacles in your Lawn

Unlike most other mowers,

LandxcapeTM

uses a side charging system,

which is able to cut the surrounding grass as much as possible. The holes

on the bottom of the charging base allow the grass to grow through the

base to help disguise it and create an elegant appearance.

LandxcapeTM’s cutting height can be adjusted. Before starting your

LandxcapeTM for the first time, you should cut the grass to the height

no more than 6 cm with your manual lawnmower. Then, set the cutting

height of your LandxcapeTM to its maximum setting (6 cm) for its first time

mowing. (See Fig. F)

Your LandxcapeTM will cut best in dry weather.It is also feasible to let

your LandxcapeTM work on rainy days as long as the lawn is solid.

Check and clean your mower regularly.

Your LandxcapeTM is afraid of lightning storms. In case of a lightning

storm, protect LandxcapeTM by unplugging the charging station,

disconnecting the boundary wire, and making sure LandxcapeTM is not

allowed to charge.

Your Landxcape

TM

loves mowing grass and requires the cutting blades to be

kept in good condition to cut at its best. Landxcape

TM

can do most things

by itself, but will sometimes need your help to prevent damage to itself.

• Never let LandxcapeTM travel over gravel.

• Remove or prevent access to obstacles that LandxcapeTM could

accidentally climb on and damage its blade turning disc.

• Remove all debris and foreign objects from your lawn.

5. Boundary Wire Basics

5.1. Pegging the Boundary Wire

Use the boundary wire distance gauge to set the correct distance

between the wire and the border of your lawn (more than 26cm).This

is the recommended distance. The provided distance gauge ensures

proper installation.

If your neighbor also uses a LandxcapeTM, keep a spacing of at least 1

metre between your boundary wire and your neighbor’s.

The boundary wire must outline the intended mowing area

exactly. Your LandxcapeTM will become confused by extra bends or

coils of boundary wire that are not part of its mowing area (See Fig.

G). If there is excess boundary wire after the mowing area has been

outlined, cut it off and store this additional wire in a separate location.

It is important to leave the necessary length where it connects to the

charging station so it can be connected and still remain buried.

5.2 Burying the Boundary Wire

If you are planning to bury the boundary wire, it is recommended to first

peg it down. This allows you to easily change the layout if necessary before

burying the wire. When the boundary wire installation is complete, have

LandxcapeTM

follow and check the path by pressing and . This

allows your

LandxcapeTM

to adjust to its new environment. .

While observing

LandxcapeTM

you can easily make alterations to the

EN 17

boundary wire to ensure

LandxcapeTM

's trouble-free tracking when locating

the charging station. Confirm that

LandxcapeTM

docks in the charging

station successfully, and bury the wire if desired.

5.3 Joining the boundary wire

If you want to extend and splice the boundary wire, use a connector.

The connector is waterproof and provides optimal connection.

Insert both wire ends in any two of the three holes of the connector.

Insert the wires fully until both wire ends are visible on the other side of

the connector. (See Fig. H) Press the connector together by using a pair

of pliers. (See Fig. I1, I2)

WARNING! It is not recommended to simply splice the boundary

wire with insulating tape or use a screw terminal block for

connection. A broken circuit may occur after a period of time as soil

moisture can oxidize the wire.

6. Software update

The software can be updated when new versions become available.

The latest software can be downloaded from our website

www.landxcape-robotics.com.

Update via USB. See below for download and installation instructions:

(1) Locate the latest software version at: www.landxcape-robotics.

com. Save the file to an empty FAT32 formatted USB (flash drive).

Delete any other files on the drive and check the format. If the drive

is not formatted in FAT32, please reformat the drive.

(2) Place LandxcapeTM on a secure and level surface. Press to turn

off your LandxcapeTM.

(3) Insert the USB drive (flash drive) in the port. (See Fig. J1)

(4) Turn LandxcapeTM on. The update will begin automatically. Wait until

the display shows “ ” (See Fig. J2), then remove the USB drive

(flash drive) and tightly close the protective cover. When the display

shows “ ”, the update is complete and LandxcapeTM will enter

the PIN page.

The manual included with your LandxcapeTM is based on the default

software at the time of production. Some new features/functions in the

new version may not exist in the manual. If you found some settings not

in the manual, please visit www.landxcape-robotics.com to download

the latest manual.

7. Maintenance

Your LandxcapeTM works hard and needs to be cleaned and checked

from time to time. Some parts will require replacement as they become

worn. Never use your LandxcapeTM with defective main switch.

Switch off the machine before carrying out any service or maintenance.

Here's how to take care of your LandxcapeTM.

7.1 Keep it sharp

WARNING: Before cleaning, adjusting, or replacing the

blades, turn your LandxcapeTM OFF and put on protective

gloves.

WARNING: When fitting new blades, make sure you

replace ALL the blades. Always use new screws when

fitting blades. This is important to ensure blade retention and

balance the blade turning disc. Failure to use new screws could

cause serious injury.

LandxcapeTM

does not cut grass like other mowers. Its cutting blades

are razor sharp on 2 edges and rotate in both directions for maximum

cutting capacity (See Fig. K). Each blade of your

LandxcapeTM

has 2

cutting edges. The blade turning disc will make forward and reverse

rotation at random to use both cutting edges and minimize the

frequency of replacing the blades. Each cutting blade will last up to

2 months when it is programmed to mow everyday. Always check to

see if the blades are chipped or damaged and replace them if they

are. When the cutting blades are dull and worn out, they should be

replaced with the spare blades provided with your

LandxcapeTM

. Spare

blades are also available at your nearest

LandxcapeTM

retailer.

A. Replace the Blades

After some time, usually every season, your LandxcapeTM’s Blades

will need to be replaced. When replacing the blades, make sure to

replace ALL of them at the same time. You can replace them with one

of the spare blade kits and extra blade screws supplied with your

LandxcapeTM.

Before attempting to replace your LandxcapeTM’s blades, turn the

power off and put on protective gloves and follow these steps:

1. Gently flip LandxcapeTM over.

2. Remove the battery cover and remove the battery.

3. Take the screws off the blades with a screwdriver. (See Fig. L)

4. Firmly screw on the new blades.

5. Refit the battery and the battery cover.

IMPORTANT: After screwing the blade to the blade disc, make

sure the blade is able to spin freely.

7.2 Keep it clean

WARNING: Before cleaning, turn your LandxcapeTM OFF.

Put on protective gloves before cleaning the blade

turning disc and do not rinse or flush with water.

A. Cleaning the body

Your LandxcapeTM will live a much happier and longer life if it is

cleaned regularly. Although, since your LandxcapeTM is an electric

machine, you will need to take care when cleaning. DO NOT use a

hose, high pressure washers and do not pour running water on

your LandxcapeTM. It is best to use a spray bottle filled with water.

When cleaning the machine body, use a soft brush or clean cloth and

avoid using solvents or polishes (See Fig. M). Lastly, remove all build

up of grass clippings and debris.

B. Cleaning the Underside

Again, it is important that you power LandxcapeTM OFF and wear

protective gloves before touching the blade turning disc.

First, flip your LandxcapeTM upside down to expose its underside. Here

you will see the blade disc, the chassis, and the front wheel and driving

wheels. Clean everything thoroughly with a soft brush or moist rag.

WARNING: NEVER clean the underside of LandxcapeTM with

running water. Component damage can occur. (See Fig. N1,

N2)

Rotate the blade disc to ensure it rotates freely. Check the blades spin

freely around the fixing screws. Remove any obstructions.

IMPORTANT: Remove any lodged debris so that it does not cause

a crack in the blade disc. Even the tiniest crack can decrease

your LandxcapeTM's mowing output.

C. Clean the contact pins and the charging strips

Clean the contact pins located on the charging station and the

charging strips located on LandxcapeTM using a cloth. Remove any

built up grass clippings or debris around the contact pins and charge

strips periodically to ensure LandxcapeTM successfully charges each

EN18

time.

7.3 Battery life

The heart of LandxcapeTM is its 20V Li-Ion battery. For proper storage of

the battery, make sure it is fully charged and kept in a cool dry place.

NOTE: The recommended LandxcapeTM operation temperature is

between 0-550C.

The life-span of LandxcapeTM’s battery depends on various factors, such

as:

• The length of the mowing season in your region

• Amount of hours LandxcapeTM mows per day

• Battery maintenance during storage

LandxcapeTM can be charged manually without the boundary

wire.

1. Connect the charging station to a suitable power supply.

The green light on the charging station will turn on.

2. Manually dock LandxcapeTM into the charging station while

LandxcapeTM is powered off. (See Fig. O)

3. The green light on the charging station will be flashing.

LandxcapeTM will begin to charge.

7.4 Winter hibernation

Your LandxcapeTM will live longer and healthier if it is allowed to

hibernate. So even though it is troublesome, we recommend storing

your LandxcapeTM in your shed or garage during the winter.

Before you prepare your LandxcapeTM for winter hibernation, we

recommend you:

• Thoroughly clean your LandxcapeTM

• Fully charge the battery and remove it from LandxcapeTM

• Turn power off

To maximize the battery life, fully charge the battery and remove it from

LandxcapeTM before storage during winter.

WARNING: Protect the underside of LandxcapeTM from

water. NEVER store LandxcapeTM upside down outdoors.

The boundary wire can be left in the ground but its ends should be

protected, such as placed in a tin can with grease. If the charging

station is left outside for the winter, leave the boundary wire connected.

NOTE: When bringing LandxcapeTM back to work after winter

hibernation, make sure the charging strips and contact pins are clean.

We recommend using a fine grade emery cloth to clean the contacts.

7.5 Replacing the battery

WARNING: Power off before attempting any adjustment,

replacement or repair.

Before replacing the blades, turn your LandxcapeTM OFF and put on

protective gloves.

If you need to replace the battery, follow these steps:

1. Gently turn your LandxcapeTM upside down.

2. Remove the screws on the battery cover. Remove the battery cover.

(See Fig. P1)

3. Lift out the old battery carefully. Press the latch and release the

connectors. (See Fig. P2)

NOTE: Do not pull by the cables. Hold the connectors and release the

latch.

4. Connect a new original battery by attaching the connectors until

they click into position. (See Fig. P3, P4)

5. Fit the battery as shown. (See Fig. P5) Place the cover back in its

position and tighten the screws.

EN 19

8. Function Messages

Display Message Action

Rain delay activated. No action is required.

9. Error Messages

Display Cause Action

LandxcapeTM is outside

working area.

1. If

LandxcapeTM

is actually outside its territory: turn

LandxcapeTM

off, take

LandxcapeTM

inside its territory. Turn

LandxcapeTM

on. Press then .

2. If

LandxcapeTM

is inside its territory, check if the LED on the charging station is green. If not,

verify that the charging station is properly connected to the charger and that the charger is

connected to a suitable power supply. If they are properly connected, the boundary wires are

clamped incorrectly and must be reversed.

3. If the LED light on the charging station turns on red, confirm that the boundary wire is

well connected to the clamps on the charging station. If the problem persists, check that the

boundary wire hasn’t been cut.

Wheel motor blocked

1. Turn LandxcapeTM off; take LandxcapeTM to an area free of obstacles.

2. Turn LandxcapeTM on. Press then .

3. If the error message is still displayed, turn power off; turn LandxcapeTM upside-down and

check if there’s anything preventing the wheels from rotating.

4. Remove any obstruction, turn LandxcapeTM upright, turn power on. Press then .

Blade disc blocked

1. Turn LandxcapeTM off.

2. Turn LandxcapeTM upside down and check if there’s anything preventing the blade disc to

rotate.

3. Remove any obstruction.

4. Turn LandxcapeTM upright and take it to an area with short grass or adjust the cutting

height;

5. Turn LandxcapeTM on. Press then .

LandxcapeTM is trapped.

1. Turn LandxcapeTM off;

2. Take LandxcapeTM to an area in your lawn free of obstacles obstacles.

3. Turn LandxcapeTM on. Press then .

4. If the error message is still displayed; turn power off; turn LandxcapeTM upside-down.

Check if there is anything preventing the wheels from rotating.

5. Remove any obstruction, turn LandxcapeTM upright, turn power on. Press then .

LandxcapeTM is lifted up.

1. Turn LandxcapeTM off.

2. Take LandxcapeTM to a lawn area clear of obstacles, turn LandxcapeTM on. Press

then .

3. If the error message is still displayed: turn LandxcapeTM off, turn LandxcapeTM upside-

down and check if there’s anything preventing the front wheels from rotating.

4. Remove any possible object, turn LandxcapeTM upright, turn LandxcapeTM on. Press

then .

LandxcapeTM is upside

down. Turn LandxcapeTM upright. Press then .

Battery error

1. Check the battery temperature. If the temperature is too high, wait until the

temperature has cooled down. Press then .

2. If the error message is still displayed, replace a new battery. Restart LandxcapeTM.

Press then .

3. If the error repeatedly occurs, try to change the working schedule.

EN20

It takes too long for

LandxcapeTM to go back to

the charging station.

Manually dock LandxcapeTM in the charging station for charging. After LandxcapeTM is

fully charged, Press then .

Refer to the installation manual.

This could be because your

router lost its power or

because you changed your

Wi-Fi router or network

provider.

Please reconnect LandxcapeTM to the Wi-Fi network it has been originally paired with.

If this is not possible, contact Customer Service.

Error unknown. Restart LandxcapeTM. Press then . If the error message is still displayed,

contact a service agent for help.

NOTES

• Before turning power on, always return LandxcapeTM to its territory. If not, “ ” will be displayed. This message is also displayed when

LandxcapeTM is sitting over the boundary wire when turned on.

• If for any reason—i.e. a party, children playing...—you want to park your LandxcapeTM in the charging station: Press then . LandxcapeTM

will go to its charging station and stay there. Or press to turn LandxcapeTM off.

• If an error repeatedly occurs in the same area of your lawn, you might have a problem with the boundary wire. Please refer to the Installation

Guide and check your set up with its help.

• If your lawn is divided in two separate areas connected by a corridor less than 1m, one of which is not provided with the charging station: when

LandxcapeTM runs out of charge, take it manually to the charging station, the charge process will start.

• If LandxcapeTM runs abnormally once in a while, please try to restart it. If the problem is not resolved, try to removing and reinstalling the

battery . If the problem is still not resolved, please contact a LandxcapeTM service agent for help.

• Do not wash your LandxcapeTM with a high pressure washer. This could cause damage to the battery or the machine.

11. Troubleshooting

If your LandxcapeTM does not work correctly, follow the troubleshooting guide below. If the issue persists, contact your Dealer.

Symptom Cause Action

The LED light on the charging station

does not turn on. There is no power.

Check the charging station is connected properly to

the charger and the charger is connected to a suitable

power supply.

Red light turns on the charging station. The boundary wire isn’t connected.

Check that the boundary wire has been connected

correctly to the charging station.

Check there are no breaks in the boundary wire, especially

in the wire ends.

LandxcapeTM turns on, but the blade

disc does not move.

LandxcapeTM is searching for the charging

station (unless you press then button

to make it go to the charging base)

This is normal. LandxcapeTM needs to recharge, the

blade disc does not rotate while it is searching for the

charging station automatically.

LandxcapeTM vibrates. Blades may be damaged. Check condition of

the blade disc.

Check the blades, and replace them if damaged.

Remove debris and foreign objects from the blades

and blade disc.

Grass is being cut unevenly.

LandxcapeTM does not work enough hours per

day. Add more hours to the scheduled mowing time.

Mowing area is too big. Try decreasing the size of the mowing area or adding

more hours to the mowing time.

Blades are dull. Change all the blades and screws in order to balance

the blade disc.

The cutting height is too low for the length of

the grass. Raise the cutting height and then gradually lower.

Grass or other object has wrapped around the

blade disc.

Check the blade disc and remove the grass or other

object.

There is a build-up of grass in the blade disc or

motor frame box.

Make sure the blade disc rotates easily. If need be, you

may take off the blade disc and remove the debris.

Pagina se încarcă ...

LX 35 Robot Lawn Mower Manualul proprietarului

LX 35 Robot Lawn Mower Manualul proprietarului

în alte limbi

Alte documente