Panasonic SCALL5CDEB Instrucțiuni de utilizare

SCALL5CDEB
Panasonic
Marca
Panasonic
Model
SCALL5CDEB
Tip
Instrucțiuni de utilizare

Acest manual este potrivit și pentru

Model number suffix “EB” denotes UK model.
RQT0A22-5B
EG
EB
GN
Operating Instructions
Compact Stereo System
Model No. SC-ALL5CD
Thank you for purchasing this product.
Please read these instructions carefully before using this product,
and save this manual for future use.
Included Installation Instructions (l 2, 3 and 26, 27)
The installation work should be done by a qualified installation specialist.
Before commencing work, carefully read these installation instructions and the operating
instructions to ensure that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this unit.)
SC-ALL5CD-EGEBGN~RQT0A22.book 1 ページ ２０１６年７月１４日　木曜日　午後６時４３分
2
RQT0A22
Caution for AC Mains Lead
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere and
that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of
AC mains plug (figures A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse
cover.
Safety precautions
Unit
≥ To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or
splashing.
– Do not place objects filled with liquids, such as vases, on
this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
– Do not let metal objects fall inside this unit.
– Do not place heavy items on this unit.
AC mains lead
≥ To reduce the risk of fire, electric shock or product damage,
– Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
– Insert the mains plug fully into the socket outlet.
– Do not pull, bend, or place heavy items on the lead.
– Do not handle the plug with wet hands.
– Hold onto the mains plug body when disconnecting the
plug.
– Do not use a damaged mains plug or socket outlet.
≥ The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged from
the socket outlet immediately.
Unit
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
≥ Do not place sources of naked flames, such as lighted
candles, on this unit.
≥ This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.
≥ This unit is intended for use in moderate climates.
Placement
≥ Place this unit on an even surface.
≥ To reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit is
well ventilated.
– Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
– Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive vibration.
Figure A Figure B
Fuse cover
Figure A
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
WARNING
CAUTION
SC-ALL5CD-EGEBGN~RQT0A22.book 2 ページ ２０１６年７月１４日　木曜日　午後６時４３分
3
RQT0A22
Battery
≥ Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
manufacturer.
≥ Mishandling of batteries can cause electrolyte leakage and
may cause a fire.
– Remove the battery if you do not intend to use the remote
control for a long period of time. Store in a cool, dark
place.
– Do not heat or expose to flame.
– Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and windows
closed.
– Do not take apart or short circuit.
– Do not recharge alkaline or manganese batteries.
– Do not use batteries if the covering has been peeled off.
≥ When disposing of the batteries, please contact your local
authorities or dealer and ask for the correct method of
disposal.
Table of contents
Caution for AC Mains Lead.............................. 2
Safety precautions............................................ 2
Accessories....................................................... 3
Control reference guide ................................... 4
Connections ...................................................... 5
Inserting media .................................................6
Network settings............................................... 7
Streaming music over the network ................. 9
Bluetooth
®
operations .................................... 11
Media playback controls ................................ 13
Listening to DAB+........................................... 14
Listening to FM radio ..................................... 16
Sound adjustment .......................................... 17
Clock and Timer.............................................. 17
Others .............................................................. 18
Troubleshooting.............................................. 20
Unit and media care........................................ 23
About Bluetooth
®
............................................ 23
Playable media................................................ 24
Licenses .......................................................... 24
Attaching the unit to a wall (optional)........... 26
Specifications..................................................28
Limited Warranty (ONLY FOR AUSTRALIA)......31
Accessories
Check the supplied accessories before using this unit.
Product Identification Marking is located on the bottom of the
unit.
About descriptions in these operating
instructions
≥ Pages to be referred to are indicated as “l ±±”.
≥ Unless otherwise indicated, operations are described using
the remote control.
∏ 1 Remote control
(N2QAYB001050)
∏ 1 Battery for remote control
∏
(For the United Kingdom and Ireland
)
1 AC mains lead
(K2CT2YY00097)
∏ (For Continental Europe)
1 AC mains lead
(K2CQ2YY00119)
∏ (For Australia and New Zealand)
1 AC mains lead
(K2CJ2YY00101)
∏ 1 DAB indoor
antenna
(RFA3664)
Wall mounting accessories
∏ 1 Safety holder
(RSC1308)
∏ 2 Wall mount
brackets
(RSC1262-1)
∏ 1 Screw
(XTB3+8JFJK-J)
≥ Do not use AC mains lead with other equipment.
≥ Product numbers provided in these operating instructions are
correct as of March 2015. These may be subject to change.
SC-ALL5CD-EGEBGN~RQT0A22.book 3 ページ ２０１６年７月１４日　木曜日　午後６時４３分
4
RQT0A22
Control reference guide
1 Standby/on switch (Í/I)
Touch to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2 Open or close the sliding door
3 Basic playback control buttons
4 Adjust the volume (0 (min) to 50 (max))
5 Select the audio source
On this unit:
On the remote control:
[ ]: “BLUETOOTH”
[CD/USB]: “CD” ,. “USB”
6 Bluetooth
®
-pairing button
≥ Touch to select “BLUETOOTH” as the audio source.
≥ Touch and hold to enter pairing mode (l 11) or
disconnect a Bluetooth
®
device (l 12).
7 AUX IN jack (l 5)
8 Port for USB devices / DC OUT terminal (l 6)
9 “ ”: Network indicator
10 “ ”: Secondary service indicator
11 “F”: Play timer indicator
12 “ ”: 1-TRACK indicator
13 “ ”: 1-ALBUM indicator
14 “RND”: RANDOM indicator
15 “`”: ON REPEAT indicator
16 NFC sensor (l 11)
17 Remote control signal sensor
Distance: Within approx. 7 m directly in front
Angle: Approx. 30o left and right
18 Sliding door
19 Display
20 Turn the unit on or off
21 Enter setup menu
22 Change the displayed information
23 Enter sound menu
24 Dim the display panel and indicators
Press again to cancel.
25 Mute the sound
Press again to cancel. “MUTE” is also cancelled when the
volume is adjusted or the unit is turned off.
26 Enter playback menu
27 Selection/OK
8
7
9 10 11 12 13 14 15
18
19
16
17
1
2
3
4
5
6
Top view Side view
ユヹヵノリワヶヴャ
20
5
3
21
22
23
2
24
4
25
26
27
“CD” ----------. “BLUETOOTH” ----------. “DAB+”
:;
“NETWORK” ( “USB”( “AUX” ( “FM”
[RADIO/EXT-IN]: “DAB+” --. “FM” --. “AUX”
^" “NETWORK”(}
§ These switches work just by touching the marks. Each
time you touch the switch, there will be a beep sound. The
beep sound can be set to off. (l 18)
≥ To avoid operating these switches unintentionally when
moving the unit, turn the unit off before moving it.
∫ Using the remote control
Insert the battery so the terminals (i and j) match those
in the remote control.
Point it at the remote control signal sensor on this unit.
≥ To avoid interference, please do not put any objects in front of
signal sensor.
≥ When the sliding door is opened, operate the remote control at
around the same level as the remote control signal sensor.
(Alkaline or manganese
battery)
SC-ALL5CD-EGEBGN~RQT0A22.book 4 ページ ２０１６年７月１４日　木曜日　午後６時４３分
5
RQT0A22
Connections
≥ These speakers do not have magnetic shielding. Do not place them near a TV, personal computer or other magnetic devices.
≥ Tape the antenna to a wall or column in a position with the least amount of interference.
≥ If radio reception is poor, use a DAB outdoor antenna (not supplied).
1 Connect an external music device using an audio
cable (not supplied).
≥ Plug type: ‰3.5 mm stereo
2 Press [RADIO/EXT-IN] repeatedly to select “AUX”
and start playback on the connected device.
∫ To select the sound input level of the
external device
1 While in AUX mode, press [SOUND] repeatedly to
select “INPUT LEVEL”.
2 Press [3, 4] to select “NORMAL” or “HIGH” and
then press [OK].
≥ The factory default is “NORMAL”.
≥ To improve sound distortion when “HIGH” is selected, select “NORMAL”.
≥ Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will
distort the sound.
≥ For details, refer to the operating instructions of the device.
Connect an external music device
2
1
Audio cable
(not supplied)
SC-ALL5CD-EGEBGN~RQT0A22.book 5 ページ ２０１６年７月１４日　木曜日　午後６時４３分
6
RQT0A22
Inserting media
∫ Charging a device
Charging starts when a device (rated value: 5 V/1.5 A) is connected to the DC OUT terminal of this unit.
1 Turn the unit on.
2 Connect a device.
{. Confirm from the screen of the connected device, etc. to
make sure charging has started.
≥ A cable compatible with your device is required. Use the
cable that comes with your device.
≥ Even if you connect a cable compatible with the DC OUT
terminal of this unit, your device may not be charged. In that
case, use the charger that comes with the device.
≥ Depending on your device, using other chargers may not
work. Check the operating instructions of your device before
use.
≥ Do not connect a device with a rated value higher than 5 V/
1.5 A to this unit.
≥ To check if charging is complete, look at the screen of the
connected device, etc.
≥ Once fully charged, remove the USB cable from the DC OUT
terminal.
≥ To continue charging during standby mode, make sure the
device has started charging before turning the unit to standby
mode.
– When charging a depleted device, do not turn the unit to
standby mode until the device becomes operational.
≥ Make sure that the unit does not fall when inserting or removing media.
≥ When moving this unit, be sure to remove all media and turn this unit to standby mode.
≥ Make sure to tilt the disc so as not to touch the sliding
door.
≥ Do not open the sliding door manually.
The label side
∫ Connecting a USB device
≥ Insert the USB device directly. Do not use any USB extension cable.
≥ Please disconnect the USB device if you finish using.
≥ Before removing the USB device, select a source other than “USB”.
∫ Inserting a CD
USB cable
(not supplied)
To the compatible device
SC-ALL5CD-EGEBGN~RQT0A22.book 6 ページ ２０１６年７月１４日　木曜日　午後６時４３分
7
RQT0A22
Network settings
You can stream music from an iOS device (iPhone/
iPad/iPod), an Android
TM
device or a PC (Windows) to
this system’s speakers by using the Qualcomm
®
AllPlay
TM
smart media platform or DLNA feature. To
use these features, this system must join the same
network as the compatible device.
Qualcomm
®
AllPlay
TM
smart media platform is a product of
Qualcomm Connected Experiences, Inc.
≥ Please update the system’s software after the
network settings are complete. (l 18)
Choose a network setting method from the
following.
≥ The setting will be cancelled after the set time limit. In that
case, try the setting again.
To cancel this setting in the middle, press [∫].
This system has built-in Wi-Fi
®
and can be connected
to a wireless router.
Preparation
≥ Place this system as close to the wireless router as
possible.
≥ Do not connect a LAN cable. Doing so will disable
the Wi-Fi
®
function.
1 Turn this system on.
2 Proceed to “Method 1” or “Method 2”.
≥
The following explanations are based on a smartphone.
1 Press [RADIO/EXT-IN] on the remote control
repeatedly to select “NETWORK”.
2 Press [SETUP] on the remote control repeatedly to
select “NET SETUP” and then press [OK].
3 Press [3, 4] on the remote control to select
“MANUAL” and then press [OK].
4 Press [3, 4] on the remote control to select
“OK? YES” and then press [OK].
≥ After pressing [OK] to confirm "OK? YES", the
previous network connection you have set with this unit
will be cleared.
“SETTING” blinks on the display.
5 Go to Wi-Fi settings on your compatible device.
6 Select “ALL5CD _AJ” to connect to this
system.
≥ “ ” stands for a character that is unique to each set.
≥ This can take up to 1 minute to appear in your Wi-Fi list.
≥ If this operation does not work correctly, please repeat it
several times.
≥ Make sure that DHCP is enabled for the network setting
on your compatible device.
≥ iOS device: The settings page will be automatically
displayed in the Internet browser.
≥ Except iOS device: Open the Internet browser and
refresh the page to display the settings page.
≥ If the settings page is not displayed, type
“http://172.19.42.1/” into the URL address field.
7 Type a device name and then select “Next”.
≥ The device name will be displayed as this system's
name on the network.
≥ Maximum characters that can be shown: 32
≥ The device name is set when “Next” is selected.
≥
You can also change the device name after the network
connection is set up. (
l
9, “To make network-related settings”)
8
Select your network name (SSID) and type the password.
≥ Check the wireless router for the network name (SSID)
and the password.
≥ A list of network names (SSIDs) will be appeared when
you select the “Network Name” box.
≥ To show the characters typed in the “Password” box,
select “Show Password”.
≥ If your network requires specific settings, deselect
“DHCP” to disable DHCP.
– You can use specific IP address, subnet mask,
default gateway, primary DNS, etc.
Wireless LAN connection
Method 1:
Using an Internet browser
Wireless LAN connection
Method 1: “Using an Internet browser”
(l below)
• You can access this unit’s network settings from
the Internet browser on your smartphone or PC,
etc.
Method 2: “Using WPS (Wi-Fi Protected
Setup
TM
)” (l 8)
• If your wireless router supports WPS, you can set
up a connection by either pressing the WPS
button, or entering the WPS PIN code.
Wired LAN connection
Method 3: “Using a LAN cable” (l 8)
• You can make a stable connection to the network
with a LAN cable.
Settings
Wi-Fi settings
ALL5CD
SC-ALL5CD-EGEBGN~RQT0A22.book 7 ページ ２０１６年７月１４日　木曜日　午後６時４３分
8
RQT0A22
9 Select “Connect” to apply the settings.
≥ On the unit’s display, “SUCCESS” appears when the
connection is established. (The network indicator “ ”
lights up.)
– If “FAIL” is displayed press [OK], check the network
name (SSID) and the password, and then try the
setting again.
≥ Depending on the device, the connection complete
screen may not be displayed.
10
Make sure to connect your compatible device back
to your home wireless network.
≥ Enable Java and Cookies in your browser settings.
1 Press [RADIO/EXT-IN] on the remote control
repeatedly to select “NETWORK”.
2 To enter “WPS PUSH” mode
1 Press [SETUP] on the remote control repeatedly to
select “NET SETUP” and then press [OK].
“WPS PUSH” is indicated on the display.
2 Press [OK].
≥ Alternatively, touch and hold [5/9] on the unit for
at least 4 seconds.
“WPS” flashes on the display.
3 Activate the WPS button on the wireless router.
≥ On the unit’s display, “SUCCESS” appears when the
connection is established. (The network indicator “ ”
lights up.)
– "FAIL" may be displayed if the connection was not
made within the set time limit. Try the setting again. If
"FAIL" is still displayed, try other methods.
4 Press [OK] on the remote control to exit the
setting.
∫ Using the WPS PIN code
1 Press [RADIO/EXT-IN] on the remote control
repeatedly to select “NETWORK”.
2 To enter “WPS PIN” mode
1 Press [SETUP] on the remote control repeatedly to
select “NET SETUP” and then press [OK].
2 Press [3, 4] on the remote control to select “WPS
PIN” and then press [OK].
≥ Alternatively, touch and hold [:/6] on the unit for
at least 4 seconds.
The PIN code is indicated on the display.
3 Enter the PIN code into the wireless router.
≥ Once the system enters WPS PIN code mode, you cannot
set up using the WPS button. To use the WPS button, turn
the system off and then on, and redo the network settings.
≥ Depending on a router, other connected devices may
temporarily lose their connection.
≥ For details, refer to the operating instructions of the wireless
router.
1 Disconnect the AC mains lead.
2 Connect the unit to a broadband router, etc. using
a LAN cable.
3 Connect the AC mains lead to the unit and turn
this system on.
≥ When the connection is established, the network
indicator “ ” lights up.
≥ Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥ The LAN cable must be connected or disconnected while the
AC mains lead is disconnected.
≥ Inserting any cable other than a LAN cable in the LAN port
can damage the system.
≥ If the LAN cable is disconnected, the network-related
settings (l 9) will be initialized. In that case, make the
settings again.
≥ When a LAN cable is connected, the Wi-Fi function will be
disabled.
Method 2:
Using WPS (Wi-Fi Protected Setup
TM
)
A compatible wireless router may have the WPS
identifier mark.
●●●●●●●●
e.g.,
Wired LAN connection
Method 3:
Using a LAN cable
ロモワ
ドヒパャモヴユノヵバ
ヒパパャモヴユノヵヹナ
LAN cable
(not supplied)
Broadband router, etc.
e.g.,
SC-ALL5CD-EGEBGN~RQT0A22.book 8 ページ ２０１６年７月１４日　木曜日　午後６時４３分
9
RQT0A22
You can change this system's name on the network,
and use specific IP address, subnet mask, default
gateway, primary DNS, etc.
Preparation
≥ Complete the network settings. (l 7)
≥ Connect your device to the same network as this
system.
≥ Check this system’s IP address (l 20), and note it
down.
1 Start an Internet browser on your device and then
type this system’s IP address into the address field
to display the settings page.
≥ It may take a few minutes until the settings page is
displayed depending on the environment. In that case,
reload the browser.
≥ If the unit is connected with Wi-Fi, only a device name
can be changed. Close the settings page after changing
the device name.
– To change the device name, select “Change”, and
type a new device name, and then select “Apply”.
2 Type a device name and then select “Next”.
≥ Refer to the step 7 of “Using an Internet browser” (l 7)
for details on a device name.
3 Select and input the details.
≥ If your network requires specific settings, deselect
“DHCP” to disable DHCP.
– You can use specific IP address, subnet mask,
default gateway, primary DNS, etc.
4 Select “Connect” to apply the settings.
≥ When the connection is established, “SUCCESS”
appears on the unit’s display.
Streaming music over the
network
You can stream music from your devices or online
music services to this system’s speakers and other
speakers powered by AllPlay.
You can also stream music source of this system to
other speakers powered by AllPlay.
You can use the AllPlay or the DLNA function to stream
music from the device on the network to this system’s
speakers by using the app “Panasonic Music
Streaming” (free of charge), etc.
≥
[iOS]
: App Store
≥
[Android]
: Google Play
TM
Preparation
≥ Complete the network
settings. (l 7)
≥ Connect the following devices to the same network
as this system.
– Device with “Panasonic Music Streaming”, etc.
installed
– Device containing music
The following steps are based on “Panasonic Music
Streaming”.
1 Turn this system on.
≥ Check that the network indicator “ ” lights up.
≥ If it does not light up, check the network settings. (l 7)
2 Start the app “Panasonic Music Streaming”.
≥ Always use the latest version of the app.
3 Select a music source.
≥ To add music source, select “My Music Network” and
then select the device containing music.
– The added music source is numbered in order from 1.
4 Select a song.
5 From “Select Speaker”, select this system as the
output speakers.
≥ If you have multiple speakers powered by AllPlay, you
can enjoy synchronised sound from them. Select
“ ” and then select the speakers to group.
– You can also play different songs on other speakers
powered by AllPlay at the same time.
– The number of speakers powered by AllPlay that can
perform playback at the same time differs depending
on the situation of use.
– When you turn off one of the speakers powered by
AllPlay, other speakers in the same group may stop
the playback.
To make network-related settings
You can also change the name of this system by
changing a setting in the app “Panasonic Music
Streaming” (version 2.0.8 or later) (l right). For
details on the app, refer to the site below.
http://panasonic.jp/support/global/cs/audio/app/
(This site is in English only.)
Streaming music on network
devices
My room
e.g.,
SC-ALL5CD-EGEBGN~RQT0A22.book 9 ページ ２０１６年７月１４日　木曜日　午後６時４３分
10
RQT0A22
≥ This system will be displayed as “Panasonic ALL5CD” if the
device name is not set.
≥ When playing back music from the DLNA server (PC with
Windows 7 or later installed, smartphone, Network Attached
Storage (NAS) device, etc.), add the contents and folder to
the libraries of the Windows Media
®
Player, the smartphone,
or the NAS device, etc.
≥ Playlist of Windows Media
®
Player can play back only the
contents that are stored in the libraries.
≥ When this system is selected as DLNA speakers ( ):
– The volume control on the unit may not apply to the app.
– Playback control using a progress bar on playback screen
may not work.
– The volume level applied to speakers powered by AllPlay
will not be reflected.
– If the system is selected as output speakers by another
device, the music source is changed to the new device.
However the former device's display may not change.
≥ About supported format, refer to “Specifications” (l 28).
– File formats that are not supported by your DLNA server
cannot be played.
≥ Depending on the contents and the connected equipment,
playback may not be performed properly.
≥ Ensure to stop playback on your device before turning it off.
This system is compatible with several online music
services.
Visit the following website for the compatibility
information.
www.panasonic.com/global/consumer/homeav/
allseries/service
Preparation
≥ Make sure that the network is connected to the
Internet.
≥ Connect a device with a compatible app installed to
the same network as this system.
1 Turn this system on.
≥ Check that the network indicator “ ” lights up.
≥ If it does not light up, check the network settings. (l 7)
2 Start the app, and select a song to playback.
∫ Using Spotify
You will need Spotify Premium. For details, visit the
following website.
www.spotify.com/connect/
After step 2
3 Select the square image of the song's cover art in
the bottom left of the playback screen.
4 From “ ”, select this system as the output
speakers.
≥ To enjoy synchronised sound from the multiple
speakers powered by AllPlay, you need to group the
speakers using the app “Panasonic Music Streaming”.
(l 9)
∫
Using online music services other than Spotify
After step 2
3
From “ ”, select this system as the output speakers.
≥ Depending on the service, you might need to open full
screen player to display “ ”.
≥ If you have multiple speakers powered by AllPlay, you
can enjoy synchronised sound from them. Select
“Group” and then select the speakers to group.
≥ This system will be displayed as “Panasonic ALL5CD” if the
device name is not set.
≥ Registration/subscription is required.
≥ Fees may apply.
≥ Services, icons, and specifications are subject to change.
≥ For details, visit the individual music service's website.
You can use the app “Panasonic Music Streaming”
(l 9) to stream this system’s music source (radio/CD/
Bluetooth
®
/AUX/USB source) to other speakers
powered by AllPlay.
Preparation
≥ Complete the network settings. (l 7)
≥ Prepare the desired audio source on this system
(e.g. insert a CD, etc.)
≥
Install your device with the app “Panasonic Music Streaming”.
≥ Connect your device and your speakers powered by
AllPlay to the same network as this system.
1 Turn this system on.
≥
Check that the network indicator “ ” lights up.
≥ If it does not light up, check the network settings. (l 7)
2 Start the app “Panasonic Music Streaming”.
≥ Always use the latest version of the app.
3 Go to the “Music Source”.
≥
The available music sources from this system will be listed
on your device, under the device name for this system.
4 Select your desired music source from the list.
5 The device will start to read the selected music
source’s information from this system.
≥ This system will change to the selector mode for the
selected music source.
≥ Depending on the selected music source, playback may
start. If a content list appears on your device, select the
desired content to start playback.
6 To stream this system’s audio to the other
speakers powered by AllPlay
1 From "Select Speaker", select “ ” next to
the device name for this system.
2 Select the speakers to group.
≥ The number of speakers powered by AllPlay that can
perform playback at the same time differs depending
on the situation of use.
≥
When you turn off one of the speakers powered by AllPlay,
other speakers in the same group may stop the playback.
≥ This system will be displayed as "Panasonic ALL5CD" if the
device name is not set.
≥ When enjoying video contents with this function, the video
and audio output may not be synchronised.
≥ If music is streamed to other speakers powered by AllPlay for
more than 8 hours, the other speakers powered by AllPlay
will automatically stop playing the music. (The specifications
are subject to change without notice.)
The operations and on-screen display items, etc. of the app
“Panasonic Music Streaming” are subject to change.
For the latest information, visit
http://panasonic.jp/support/global/cs/audio/app/
More apps are available. For details, visit
www.panasonic.com/global/consumer/homeav/
allseries/service
(These sites are in English only.)
Streaming online music
Streaming music on this system
SC-ALL5CD-EGEBGN~RQT0A22.book 10 ページ ２０１６年７月１４日　木曜日　午後６時４３分
11
RQT0A22
Bluetooth
®
operations
You can listen to the sound from the Bluetooth
®
audio device from this unit wirelessly.
≥ Refer to the operating instructions of the Bluetooth
®
device for details.
≥ If you intend to use an NFC (Near Field Communication)-compatible Bluetooth
®
device, proceed to “One-Touch
Connection (Connecting by NFC)”.
Preparation
≥ Turn on the Bluetooth
®
feature of the device and
place the device near this unit.
∫ Pairing with Bluetooth
®
devices
1 Press [ ] to select “BLUETOOTH”.
{. If “PAIRING” is indicated on the display, go to step 4.
To enter pairing mode*
2 Press [PLAY MENU] to select “PAIRING”.
3 Press [3, 4] to select “OK? YES” and then press
[OK].
To pair with a device
4 Select “SC-ALL5CD” from the Bluetooth
®
device’s
Bluetooth
®
menu.
{. The MAC address (e.g., 6C:5A:B5:B3:1D:0F) may be
displayed before “SC-ALL5CD” is displayed.
{. The name of the connected device is indicated on the
display for a few seconds.
5 Start playback on the Bluetooth
®
device.
* You can also enter pairing mode by touching and holding
[ -PAIRING] on the unit.
∫ Connecting a paired Bluetooth
®
device
1 Press [ ] to select “BLUETOOTH”.
{. “READY” is indicated on the display.
2 Select “SC-ALL5CD” from the Bluetooth
®
device’s
Bluetooth
®
menu.
{. The name of the connected device is indicated on the
display for a few seconds.
3 Start playback on the Bluetooth
®
device.
≥ If prompted for the passkey, input “0000”.
≥ You can register up to 8 devices with this unit. If a 9th device
is paired, the device that has not been used the longest will
be replaced.
≥ This unit can only be connected to one device at a time.
≥ When “BLUETOOTH” is selected as the source, this unit will
automatically try and connect to the last connected
Bluetooth
®
device. (“LINKING” is indicated on the display
during this process.) If the connection attempt fails, try to
establish a connection again.
For NFC-compatible Bluetooth
®
devices (Android
devices) only
Simply by touching an NFC (Near Field
Communication)-compatible Bluetooth
®
device on the
unit, you can complete all preparations, from
registering a Bluetooth
®
device to establishing a
connection.
Preparation
≥ Turn on the NFC feature of the device.
≥ Android device version lower than 4.1 requires the
installation of the app “Panasonic Music Streaming”
(free of charge).
1 Enter “Panasonic Music Streaming” in the search box
of Google Play to search, and then select “Panasonic
Music Streaming”.
2 Start the app “Panasonic Music Streaming” on the
device.
– Follow on-screen instructions on your device.
– Always use the latest version of the app.
1 Press [ ] to select “BLUETOOTH”.
2 Touch and hold your device on the NFC sensor of
this unit as illustrated below.
Do not move the Bluetooth
®
device until it beeps, displays
a message or reacts in some way.
Once the Bluetooth
®
device has reacted, move the device
away from this unit.
≥ When the registration and connection of the Bluetooth
®
device is complete, the name of the connected device is
indicated on the display for a few seconds.
≥ The location of the NFC touch area differs depending on
the device. When a connection cannot be established
even if your Bluetooth
®
device has touched the NFC
touch area of this unit, change the position of the device.
The condition may also improve if you download the
dedicated app “Panasonic Music Streaming” and start it
up.
3 Start playback on the Bluetooth
®
device.
≥ If you touch another device to this unit, you can update the
Bluetooth
®
connection. The previously connected device will
be disconnected automatically.
≥ When the connection is established, playback may start
automatically depending on the type of device being used.
≥ The One-Touch Connection may not work properly
depending on the type of device being used.
Connecting via Bluetooth
®
menu
One-Touch Connection
(Connecting by NFC)
NFC sensor
Side view
Bluetooth
®
device
Top view
SC-ALL5CD-EGEBGN~RQT0A22.book 11 ページ ２０１６年７月１４日　木曜日　午後６時４３分
12
RQT0A22
You can change the transmission mode to prioritise
transmission quality or sound quality.
Preparation
≥ Press [ ] to select “BLUETOOTH”.
≥ If a Bluetooth
®
device is already connected,
disconnect it.
1 Press [PLAY MENU] repeatedly to select
“LINK MODE”.
2 Press [3, 4] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
≥ Select “MODE 1” if the sound is interrupted.
≥ The factory default is “MODE 2”.
If the sound input level from the Bluetooth
®
device is
too low, change the input level setting.
Preparation
≥ Connect a Bluetooth
®
device.
1 Press [PLAY MENU] repeatedly to select “INPUT
LEVEL”.
2 Press [3, 4] to select the level and then press
[OK].
“LEVEL 0”
,. “LEVEL i1” ,. “LEVEL i2”
^---------------------------------------------------------J
≥ Select “LEVEL 0” if the sound is distorted.
≥ The factory default is “LEVEL 0”.
1 While a Bluetooth
®
device is connected:
Press [PLAY MENU] repeatedly to select
“DISCONNECT?”.
2 Press [3, 4] to select “OK? YES” and then press
[OK].
≥ You can also disconnect the Bluetooth
®
device by touching
and holding [ -PAIRING] on the unit.
≥ The Bluetooth
®
device will be disconnected if a different
audio source (e.g., “CD”) is selected.
Bluetooth
®
transmission mode
Bluetooth
®
input level
Disconnecting a Bluetooth
®
device
SC-ALL5CD-EGEBGN~RQT0A22.book 12 ページ ２０１６年７月１４日　木曜日　午後６時４３分
13
RQT0A22
Media playback controls
The following marks indicate the availability of the
feature.
Preparation
≥ Turn the unit on.
≥ Insert the media or connect the Bluetooth
®
/AllPlay/
DLNA compatible device. (l 6, 9, 11)
≥ Press [CD/USB] or [ ] to select the audio source.
– [Network]: When this system is selected as the output
speakers, the audio source will change to the network
source.
∫ To display information
([CD], [USB], [Bluetooth])
Press [DISPLAY] repeatedly.
≥ To use this unit’s remote control with a Bluetooth
®
device, the
Bluetooth
®
device must support AVRCP (Audio Video
Remote Control Profile).
Depending on the status of the device, some controls may
not work.
≥ [Network]: Some controls may not work depending on the app
in use, or when using the DLNA feature, etc.
≥ Maximum number of displayable characters: approx. 32
≥ This unit supports ver. 1.0, 1.1 and 2.3 ID3 tags. Text data
that is not supported will not be displayed or will be shown
differently.
≥ [Bluetooth]: When enjoying video contents with this function,
the video and audio output may not be synchronised.
Select the playback mode.
1 Press [PLAY MENU] to select “PLAYMODE” or
“REPEAT”.
2 Press [3, 4] to select the setting and then press
[OK].
≥ During random play, you cannot skip to the previous track.
≥ The mode is cancelled when you open the sliding door or
remove the USB device.
[CD]: CD audio in CD-DA format and a CD that
contains MP3 files (l 24)
[USB]: USB devices containing MP3 files (l 24)
[Bluetooth]: Connected Bluetooth
®
device (l 11)
[Network]: When connected to an AllPlay/DLNA
compatible device (l 9)
Basic controls
(
[CD], [USB], [Bluetooth], [Network])
Play Press [1/;].
Stop Press [∫].
≥ [USB]: The position is memorised and
“RESUME” is displayed.
≥ [USB]: Press [∫] two times to stop the
playback fully.
Pause Press [1/;].
Press again to restart play.
Skip Press [:/6] or [5/9] to skip
track.
[CD], [USB] Press [3] or [4] to skip the
MP3 album.
Search
(Except
[Network])
During play or pause, press and hold
[:/6] or [5/9].
“A _ _ _”: MP3 album number.
“T _ _ _”: MP3 track number.
≥ “ _ ” stands for the album or track number.
e.g., MP3
Playback modes ([CD], [USB])
PLAYMODE
OFF
PLAYMODE
Cancels the play mode setting.
1-TRACK Only plays the selected track.
≥ The 1-TRACK indicator “ ” lights up.
(Skip to the desired track.)
1-ALBUM Only plays the selected MP3 album.
≥ The 1-ALBUM indicator “ ” lights up.
RANDOM Plays the contents randomly.
≥ The RANDOM indicator “RND” lights
up.
1-ALBUM
RANDOM
Plays the tracks in the selected
MP3 album randomly.
≥ Press [3] or [4] to select the MP3
album.
≥ The 1-ALBUM indicator “ ” and the
RANDOM indicator “RND” light up.
REPEAT
ON REPEAT Turns on repeat mode.
≥ The ON REPEAT indicator “`” lights
up.
OFF
REPEAT
Turns off repeat mode.
SC-ALL5CD-EGEBGN~RQT0A22.book 13 ページ ２０１６年７月１４日　木曜日　午後６時４３分
14
RQT0A22
Listening to DAB+
Preparation
≥ Make sure that the DAB antenna is connected. (l 5)
≥ Turn the unit on.
≥ Press [RADIO/EXT-IN] repeatedly to select “DAB+”.
To listen to DAB+ broadcasts, the available stations
need to be memorised in this unit.
≥ This unit will automatically start the “DAB AUTO
SCAN” and memorise the stations that are available
in your region if the memory is empty.
≥ “SCAN FAILED” is displayed when the auto scan is
unsuccessful. Locate the position with the best reception
(l 15, “To verify or improve the signal reception quality”) and
then re-scan DAB+ stations.
∫ To re-scan DAB+ stations
When new stations are added or when the antenna
has been moved, reperform the auto scan.
1 Press [PLAY MENU] to select “AUTOSCAN” and
then press [OK].
2 While “START ?” is flashing,
Press [OK].
≥ When updating the memory with the auto scan, preset
stations will be erased. Preset them again (l right).
Preparation*
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [3, 4] to select “STATION” and then press
[OK].
1 Press [RADIO/EXT-IN] repeatedly to select
“DAB+”.
2 Press [:/6] or [5/9] to select the
station.
You can preset up to 20 DAB+ stations.
1 While listening to a DAB broadcast
Press [OK].
2 Press [3, 4] to select the desired preset channel
number and then press [OK].
≥ You cannot preset stations when the station is not
broadcasting or when the secondary service is selected.
≥ The station occupying a channel is erased if another station
is preset in that channel.
∫ Listening to preset DAB+ stations
Preparation*
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [3, 4] to select “PRESET” and then press
[OK].
1 Press [RADIO/EXT-IN] repeatedly to select
“DAB+”.
2 Press [:/6] or [5/9] to select the
station.
≥ To select by preset, make sure that stations have already
been preset manually.
≥ To add additional preset stations, select the station using the
method mentioned in “Listening to the memorised stations”
(l left).
Some DAB+ stations provide a secondary service as
well as the primary service. If the station you are
listening to is providing secondary service, the
secondary service indicator “ ” lights up.
1
While the secondary service indicator “ ” lights up.
Press [PLAY MENU] repeatedly to select “DAB
SECONDARY”.
2 Press [3, 4] to select the secondary service and
press [OK].
≥ The setting will go back to primary service when changes are
made (e.g. the station is changed).
* The “TUNEMODE” setting is memorised until it is changed.
Memorising stations
Listening to the memorised stations
Presetting DAB+ stations
Listening to the secondary service
SC-ALL5CD-EGEBGN~RQT0A22.book 14 ページ ２０１６年７月１４日　木曜日　午後６時４３分
15
RQT0A22
Press [DISPLAY] to change the display.
The information will scroll through the display.
Each time you press the button:
If the DAB broadcast includes time information, this
unit’s clock will be automatically updated.
1 Press [PLAY MENU] repeatedly to select “AUTO
CLOCK ADJ”.
2 Press [3, 4] to select “ON ADJUST” and then
press [OK].
≥ Select “OFF ADJUST” to turn the automatic clock adjustment
function off.
To check the signal reception quality, at least 1
frequency block needs to be successfully memorised.
≥ If “SCAN FAILED” is displayed after “DAB+” is
selected or after an auto scan, proceed to “Manually
tuning 1 frequency block” (l below)
≥ If stations have already been memorised to this unit,
proceed to “Checking the DAB+ signal reception
quality” (l right)
∫ Manually tuning 1 frequency block
Use this function to scan 1 frequency block after
adjusting the position of the DAB antenna.
Preparation
Note down a frequency block that can be received in
your region (e.g., 12B 225.648 MHz).
1 While “SCAN FAILED” is displayed.
Adjust the position of the DAB antenna.
2 Press [PLAY MENU] repeatedly to select
“MANUAL SCAN”.
3 Press [3, 4] to select the frequency block that is
receivable in your region and then press [OK].
≥ If broadcasting stations are memorised, proceed to
“To re-scan DAB+ stations” to memorise stations on other
frequency blocks. (l 14)
≥ If “SCAN FAILED” is still displayed, repeat steps 1 to 3 until a
station is memorised. If the situation does not improve, try
using an outdoor DAB antenna or consult your dealer.
∫ Checking the DAB+ signal reception
quality
1 While listening to the DAB broadcast:
Press [PLAY MENU] repeatedly to select “SIGNAL
QUALITY” and then press [OK].
≥ The current frequency block is displayed and
then the reception quality is indicated.
2 If the signal reception quality is poor, move the
antenna to a position where the reception quality
improves.
3 To continue checking the quality of other frequency
blocks:
Press [3, 4] again and select the desired
frequency.
4 Press [OK] to exit.
≥ If the antenna has been adjusted, perform auto scanning and
update the station memory. (l 14)
Display
Dynamic label: Information about the
broadcast
PTY display: Programme type
Ensemble label: The name of the ensemble
Frequency display: The frequency block and
frequency is displayed.
Time display: Current time
Automatic clock adjustment
To verify or improve the signal
reception quality
Reception quality
0 (poor) – 8 (excellent)
SC-ALL5CD-EGEBGN~RQT0A22.book 15 ページ ２０１６年７月１４日　木曜日　午後６時４３分
16
RQT0A22
Listening to FM radio
You can preset up to 30 channels.
Preparation
≥ Make sure that the antenna is connected. (l 5)
≥ Turn the unit on.
≥ Press [RADIO/EXT-IN] repeatedly to select “FM”.
≥ A station previously stored is overwritten when another
station is stored in the same channel preset.
1 Press [PLAY MENU] to select “A.PRESET”.
2 Press [3, 4] to select “LOWEST” or “CURRENT”
and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.50).
CURRENT:
To begin auto preset with the current frequency.*
{. The tuner starts to preset all the stations it can receive
into the channels in ascending order.
* To change the frequency, refer to “Manual tuning and
presetting”.
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [3, 4] to select “PRESET” and then press
[OK].
3 Press [:/6] or [5/9] to select the
channel.
∫ Manual tuning and presetting
Select a radio broadcast.
1 Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2 Press [3, 4] to select “MANUAL” and then press
[OK].
3 Press [:/6] or [5/9] to tune to the
required station.
≥ To start automatic tuning, press and hold [:/6] or
[5/9] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
4 While listening to the radio broadcast, press [OK].
5 Press [3, 4] to select the channel and then press
[OK].
∫ To improve FM sound quality
1 While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select “FM MODE”.
2 Press [3, 4] to select “MONO” and then press
[OK].
≥ This setting can be preset and memorised. To do so,
continue to step 4 of “Manual tuning and presetting”.
≥ Select “STEREO” in step 2 to return to stereo broadcasts.
≥ “MONO” is cancelled if the frequency is changed.
∫ To display the current FM signal status
Press [DISPLAY].
≥ For Continental Europe:
Press [DISPLAY] repeatedly to select “FM STATUS”.
≥ “STEREO” is displayed when this unit tunes to a stereo
broadcast.
∫ To display RDS text data
(For Continental Europe only)
This system can show the text data transmitted by the
radio data system (RDS) available in some areas.
Press [DISPLAY] repeatedly.
≥ RDS is available only when stereo works in reception.
≥ RDS may not be available if reception is poor.
Presetting stations automatically
Listening to a preset channel
“FM ST”: The FM signal is tuned and in stereo.
“FM - - - -”: There is no tuned signal or the FM signal
is in monaural.
“FM MONO”: “MONO” is selected in step 2 of “To
improve FM sound quality” (l above).
“PS”: Programme service
“PTY”: Programme type
“FREQ”: Frequency
SC-ALL5CD-EGEBGN~RQT0A22.book 16 ページ ２０１６年７月１４日　木曜日　午後６時４３分
17
RQT0A22
Sound adjustment
The following sound effects can be added to the audio
output.
1 Press [SOUND] repeatedly to select the effect.
2 Press [3, 4] to select the setting and then press
[OK].
≥ You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
≥ When “AUX” is selected as the source, you can select
“INPUT LEVEL” to adjust the sound input level of the
external device. (l 5)
Clock and Timer
This is a 24-hour clock.
1 Press [SETUP] repeatedly to select “CLOCK”.
2 Press [3, 4] to set the time and then press [OK].
≥ To display the clock, press [SETUP] repeatedly to select
“CLOCK” and then press [OK] once. The time is displayed for
10 seconds.
(During standby, press [DISPLAY] once. The time is
displayed for approx. 10 seconds and then the display
disappears.)
≥ The clock is reset when there is a power failure or when the
AC mains lead is removed.
≥ Reset the clock regularly to maintain accuracy.
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock.
1 Press [SETUP] repeatedly to select “TIMER ADJ”.
2 Press [3, 4] to set the starting time (“ON TIME”)
and then press [OK].
3 Press [3, 4] to set the finishing time
(“OFF TIME”) and then press [OK].
4 Press [3, 4] to select the music source*
and then
press [OK].
Turning the timer on
1 Prepare the selected music source and set the
desired volume.
2 Press [SETUP] repeatedly to select “TIMER SET”.
3 Press [3, 4] to select “SET” and then press [OK].
≥ The play timer indicator “F” lights up.
≥ To turn the timer off, select “OFF”.
4 Press [Í] to turn the unit to standby mode.
≥ To display the timer settings, press [SETUP] repeatedly to
select “TIMER ADJ” and then press [OK] once.
The music source and volume will also be displayed if the
timer is turned on.
≥ During standby, if the timer is turned on, press [DISPLAY]
twice to display the settings.
≥ This unit can be used as normal after the timer is set,
however:
– Turn the unit to standby mode before the timer start time.
– Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
* “CD”, “USB”, “DAB+” and “FM” can be set as the music
source.
The sleep timer can turn the unit off after a set time.
1 Press [SETUP] to select “SLEEP”.
2 Press [3, 4] to set the time (in minutes) and then
press [OK].
“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”
^------------------. “OFF” (Cancel) (------------------J
≥ The remaining time is indicated on the unit’s display except
when other operations are performed.
≥ The play timer and sleep timer can be used together. The
sleep timer is always the main timer on the unit.
“PRESET EQ”
(Preset Equalizer)
“HEAVY” (heavy), “SOFT” (soft),
“CLEAR” (clear), “VOCAL”
(vocal) or “FLAT” (flat/off).
≥ The factory default is “HEAVY”.
“BASS” (Bass) or
“TREBLE” (Treble)
Adjust the level (j4 to i4).
“D.BASS”
(Dynamic Bass)
“ON D.BASS” or “OFF D.BASS”.
≥ The factory default is
“ON D.BASS”.
“SURROUND”
(Surround)
“ON SURROUND” or
“OFF SURROUND”.
≥ The factory default is
“OFF SURROUND”.
Setting the clock
Play timer
Sleep timer
SC-ALL5CD-EGEBGN~RQT0A22.book 17 ページ ２０１６年７月１４日　木曜日　午後６時４３分
18
RQT0A22
Others
As a factory default, this unit will turn to standby mode
automatically if there is no sound and it is not being
used for approximately 20 minutes.
To cancel this function
1 Press [SETUP] repeatedly to select “AUTO OFF”.
2 Press [3, 4] to select “OFF” and then press [OK].
≥ To turn the function on, select “ON” in step 2.
≥ This setting cannot be selected when radio is the source.
≥ When connected to a Bluetooth
®
device, the function does
not work.
≥ When playing AllPlay/DLNA, the function does not work.
≥ If “NET STANDBY” is set to “ON”, this function will also be
set to “ON”. To change the setting, set “NET STANDBY” to
“OFF”. (l 19)
When “SC-ALL5CD” is selected from a paired
Bluetooth
®
device’s Bluetooth
®
menu, this unit will turn
on automatically from standby mode and establish a
Bluetooth
®
connection.
1 Press [SETUP] repeatedly to select “BLUETOOTH
STANDBY”.
2 Press [3, 4] to select “ON” and then press [OK].
≥ To turn the function off, select “OFF” in step 2.
When other Panasonic equipment responds to the
supplied remote control, change the remote control
code.
1 Press [CD/USB] to select “CD”.
2 While touching and holding [SELECTOR] on the
unit, press and hold [CD/USB] on the remote
control until the unit’s display shows “REMOTE 2”.
3 Press and hold [OK] and [CD/USB] on the remote
control for at least 4 seconds.
≥ To change the mode back to “REMOTE 1”, press [CD/USB]
to select “CD” and then repeat the step 2 and 3 but replace
[CD/USB] with [ ].
As a factory default, there will be a beep sound when
you touch the switch on the unit.
To cancel this function
1 Press [SETUP] repeatedly to select “BUZZER”.
2 Press [3, 4] to select “OFF” and then press [OK].
≥ To turn the function on, select “ON” in step 2.
≥ The function works during muting as well.
Occasionally, Panasonic may release updated
software for this system that may add or improve the
way a feature operates. These updates are available
free of charge.
Preparation
≥ Turn this system on.
≥ Connect this system to the home network. (l 7)
– Make sure that the network is connected to the
Internet.
1 Press [RADIO/EXT-IN] repeatedly to select
“NETWORK”.
2 Press [SETUP] repeatedly to select
“SW UPDATE” and then press [OK].
3 Press [3, 4] to select “OK? YES” and then press
[OK] to start the update.
≥ Select “OK? NO” to cancel the update.
When the update begins, “UPDATING” is
displayed. After the update has finished,
“SUCCESS” is displayed.
4 Disconnect the AC mains lead and reconnect it
after 1 minute.
≥ If there are no updates, “NO NEED” is displayed.
≥ Downloading will require several minutes. It may take longer
or may not work properly depending on the connection
environment.
Auto off function
Bluetooth
®
standby
Changing the unit and remote
control code
Beep sound setting
Software update
You can also update the software from a pop-up
prompting you to do so on-screen within the app
“Panasonic Music Streaming” (version 2.0.8 or later)
(l 9). For details on the app, refer to the site below.
http://panasonic.jp/support/global/cs/audio/app/
(This site is in English only.)
DO NOT DISCONNECT the AC mains lead
while one of the following messages is
displayed.
“UPDATING” or “UPD%”
(“ ” stands for a number.)
≥ During the update process, no other operations can be
performed.
SC-ALL5CD-EGEBGN~RQT0A22.book 18 ページ ２０１６年７月１４日　木曜日　午後６時４３分
19
RQT0A22
Press [SETUP] repeatedly to select “SW VER.” and
then press [OK].
The version of the installed software is displayed.
≥ Press [OK] to exit.
This system can turn on automatically from standby
mode when this system is selected as the network
device’s output speakers.
As a factory default, the network standby is off before
you connect this system to the home network.
When you connect it to the home network for the first
time, this function will automatically switch to on.
You can also turn the network standby on by the
following steps:
1 Press [SETUP] repeatedly to select
“NET STANDBY” and then press [OK].
2 Press [3, 4] to select “ON” and then press [OK].
≥ When “NET STANDBY” is “ON”
– The network (wired LAN/Wi-Fi) will be active even
in standby mode.
– The power consumption in standby mode will
increase. To reduce the power consumption in
standby mode, turn off the network standby.
To turn off the network standby
Select “OFF” in step 2.
≥ When you have turned “NET STANDBY” to “OFF”
– The network (wired LAN/Wi-Fi) will be disabled in
standby mode if the system is switched to standby
mode at a source other than “NETWORK”.
The network (wired LAN/Wi-Fi) will be enabled
when the system is turned on.
– Network standby will be active if the system is
switched to standby mode at “NETWORK”
selector mode and this system is connected to the
network.
– To keep the network standby turned off, select a
source other than “NETWORK” before switching
the unit to standby mode.
≥ This function will return to default setting if you have
performed the operation for network reset. (l 20)
≥ When the system is turned on by this feature, the beginning
part of the music may not be played back.
≥ Depending on the app, the conditions for activating this
function may differ.
≥ The system may not turn on even when selected as the
output speakers. In that case, start playback.
The wireless LAN function can be enabled or disabled.
1 Press [RADIO/EXT-IN] repeatedly to select
“NETWORK”.
2 Press [SETUP] repeatedly to select
“WIRELESS LAN” and then press [OK].
3 Press [3, 4] to select “ON” or “OFF” and then
press [OK].
≥ The factory default is “ON”.
To check the Wi-Fi signal strength where this system is
located.
Preparation
Connect this system to the wireless network. (l 7)
1 Press [RADIO/EXT-IN] repeatedly to select
“NETWORK”.
2 Press [SETUP] repeatedly to select “SIGNAL
LEVEL” and then press [OK].
“LEVEL ” is indicated on the display.
(“ ” stands for a number.)
≥ Press [OK] to exit this display mode.
≥ It is recommended to have a signal strength of “3”. Change
the position or angle of your wireless router or this system if
the indication is “2” or “1” and see if the connection improves.
≥ If “LEVEL 0” is displayed, this system cannot establish a link
with the wireless router. (l 22)
Display the name for the connected wireless network
(SSID).
1 Press [RADIO/EXT-IN] repeatedly to select
“NETWORK”.
2 Press [SETUP] repeatedly to select “NET INFO”
and then press [OK].
3 Press [3, 4] repeatedly to select “SSID” and then
press [OK].
≥ Press [OK] to exit.
≥ If “NO CONNECT” is displayed this system is not connected
to a wireless network.
≥ Characters that cannot be displayed are replaced with “¢”.
Checking the software version
Network standby
Wireless LAN setting
Wi-Fi signal strength
Wireless network name (SSID)
SC-ALL5CD-EGEBGN~RQT0A22.book 19 ページ ２０１６年７月１４日　木曜日　午後６時４３分
20
RQT0A22
To check this system’s IP address or the Wi-Fi MAC
address.
1 Press [RADIO/EXT-IN] repeatedly to select
“NETWORK”.
2 Press [SETUP] repeatedly to select “NET INFO”
and then press [OK].
3 Press [3, 4] repeatedly to select “IP ADDR.” or
“MAC ADDR.” and then press [OK].
The IP address or the MAC address is partially
displayed.
4 Press [3, 4] on the remote control to show the
rest of the IP address or the MAC address.
≥ Press [OK] to exit.
≥ The “ – ” displayed on the top or bottom left of the
display indicate the first and last units respectively.
To reset the network settings.
1 Press [RADIO/EXT-IN] repeatedly to select
“NETWORK”.
2 Press [SETUP] repeatedly to select “NET RESET”
and then press [OK].
3 Press [3, 4] to select “OK? YES” and then press
[OK].
≥ “NETWORK INITIALIZING” is indicated on the display.
When the display returns to “NETWORK”, the network
settings are reset.
≥ This function does not affect the “WIRELESS LAN” setting.
Troubleshooting
Before requesting service, make the following checks.
If you are uncertain about some of the check points, or
if the solutions indicated in the following guide does not
resolve the issue, then consult your dealer for
instructions.
Cannot turn on the unit.
≥ After connecting the AC mains lead, wait about 10 seconds before
turning on the unit.
Humming heard during playback.
≥ If an AC mains lead or fluorescent lights are near the cords, then
keep other appliances and cords away from the cables.
The unit does not work.
≥ One of the unit’s safety devices may have been activated.
Reset the unit as follows:
1 Touch [Í/I] on the unit to switch the unit to standby.
≥ If the unit does not switch to standby, touch [∫] on the unit
for approximately 10 seconds. The unit is forcibly switched
to standby. Alternatively, disconnect the AC mains lead, wait
for at least 3 minutes, then reconnect it.
2 Touch [Í/I] on the unit to switch it on. If the unit still cannot be
operated, consult the dealer.
MP3 cannot be read.
≥ You may not be able to play MP3 if you have copied a
multi-session disc that has no data between sessions.
≥ When creating a multi-session disc, it is necessary to close the
session.
≥ The amount of data on the disc is too small. Set the amount of
data to above 5 MB.
Charging does not start during standby mode.
≥ Turn the unit on. Check the charging has started, and then turn
the unit to standby mode. (l 6)
Noise is heard.
≥ When a device is connected to both the AUX IN jack and the DC
OUT terminal, noise may be generated depending on the device.
In this case, remove the USB cable from the DC OUT terminal.
The switches on the unit do not work.
≥ The switches on the unit are touch keys. Touch the switches with
your finger. They may not work if operated with your fingernails or
hands wearing gloves.
IP/MAC Address
Network reset
To return all settings to the factory defaults
When the following situations occur, reset the
memory:
≥ You want to clear and reset the memory contents.
1 Touch and hold [Í/I] on the unit until “RESET?”
appears on the display.
2 While touching and holding down [Í/I] on the
unit, touch [SELECTOR] on the unit.
“RESET” appears on the display and all the indicators
flash. After “---------” is displayed, the unit will turn off.
≥ The settings are returned to the factory defaults. It is
necessary to set the memory items again.
≥ To reset the network settings, perform the operation for
network reset. (l left)
General
SC-ALL5CD-EGEBGN~RQT0A22.book 20 ページ ２０１６年７月１４日　木曜日　午後６時４３分
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Panasonic SCALL5CDEB Instrucțiuni de utilizare

SCALL5CDEB
Panasonic
Marca
Panasonic
Model
SCALL5CDEB
Tip
Instrucțiuni de utilizare
Acest manual este potrivit și pentru
Descărcați PDF
raport

în alte limbi

Lucrări conexe

Alte documente