Sames A3 Manual de utilizare

Marca: Sames

Model: A3

Categorie: Pulverizator de vopsea

Tip: Manual de utilizare

DOCUMENTATION

AUTOMATIC SPRAY GUN

Manual : 582.065.110-UK - 2107

Date: 2707/21

Supersede : 12/06/19

Modif.:

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents relating to

this equipment (professional use only).

THE PICTURES A ND DRA WINGS ARE NON CONTRACTUA L. WE RESERV E THE RIGHT TO MA KE CHANGES WITHOUT PRIOR NOTICE..

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN N° : 578.008.130-2106

578.008.130 2106

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

Pour une utilisation sure, Il est de votre

responsabilité de :

• Lire attentiv ement tous les documents av ant la

mise en serv ice de l’équipement,

•

D’installer, d’utiliser, d’entretenir et de réparer

l’équipement conf ormément aux préconisations de

SAMES KREMLIN ainsi qu’aux réglementations

nationales et/ou locales,

•

Vous assurez que les utilisateurs de cet

équipement

ont été f ormés, ont parf aitement

compris les règles de sécurité et qu’ils les appliquent.

To ensure safe use of the machinery, it is your

responsibility to:

• Caref ully read all documents bef ore putting the

machinery into serv ice,

• Install, use, maintain and repair the machinery in

accordance with SAMES KREMLIN's

recommendations and national and/or local

regulations,

• Make sure that the users of the machinery hav e

receiv ed proper training and that they hav e perf ectly

understood the saf ety rules and apply them.

Eine sichere Nutzung setzt voraus, dass Sie: :

•

Lesen Sie alle Dokumente sorgf ältig durch,

bev or Sie die Anlage in Betrieb nehmen,

• die Anlage im Einklang mit den Empf ehlungen

v on SAMES KREMLIN sowie mit den nationalen

und/oder lokalen Bestimmungen installieren,

v erwenden, warten und reparieren,

•

sich v ergewissern, dass die Nutzer dieser

Anlage angemessen geschult wurden, die

Sicherheitsbestimmungen v erstanden haben und sie

anwenden.

Para una utilización segura, será de su

responsabilidad:

• leer atentamente todos los documentos antes de

la puesta en serv icio del equipo,

•

instalar, utilizar, ef ectuar el mantenimiento y

reparar el equipo con arreglo a las recomendaciones

de SAMES KREMLIN y a la normativ a nacional y /o

local,

• cerciorarse de que los usuarios de este equipo

han recibido la f ormación necesaria, han entendido

perf ectamente las normas de seguridad y las

aplican.

Per un uso sicuro, vi invitiamo a:

•

leggere attentamente tutta la documentazione

prima della messa in f unzione dell'apparecchio,

• ins

tallare, utilizzare, mantenere e riparare

l'apparecchio rispettando le raccomandazioni di

SAMES KREMLIN, nonché le normativ e nazionali e/o

locali,

•

accertarv i che gli utilizzatori dell'apparecchio

abbiano ricev uto adeguata f ormazione, abbiano

perf ettamente compreso le regole di sicurezza e le

applichino.

Para uma utilização segura, é da sua

responsabilidade:

• Ler atentamente todos os documentos antes de

pör o equipamento em f uncionamento,

• Proceder à instalação, utilização, manutenção e

reparação do equipament

o de acordo com as

preconizações de SAMES KREMLIN, bem como

com outros regulamentos nacionais e/ou locais

aplicáv eis,

• Assegurar-

se que os utilizadores do

equipamento f oram dev idamente capacitados,

compreenderam perf eitamente e aplicam as dev idas

regras de segurança.

Voor een veilig gebruik dient u:

• Lees alle documenten zorgv uldig door v oordat u

de apparatuur in gebruik neemt,

•

het apparaat te installeren, gebruiken,

onderhouden en repareren v olgens de door SAMES

KREMLIN gegev en aanbev elingen en

ereenkomstig de nationale en/of plaatselijke

reglementeringen,

•

zeker te stellen dat de gebruikers v an dit

apparaat zijn opgeleid, de v eiligheidsregels perf ect

hebben begrepen en dat zij die ook toepassen.

För en säker användning av utrustningen ansvarar

ni för följande:

• Läs alla dokument noggrant innan utrustningen

tas i bruk,

•

Installera, anv änd, underhåll och reparera

utrustningen enligt anv isningarna f rån SAMES

KREMLIN och enligt nationella och/eller lokala

bestämmelser.

• Försäkra er om att anv ändare av denna

utrustning erhållit utbildning, till f ullo f örstått

säkerhetsf öreskrif terna och tillämpar dem.

Käytön turvallisuuden varmistamiseksi

velvollisuutesi on:

• Lue kaikki asiakirjat huolellisesti ennen laitteen

käy ttöönottoa.

• Noudattaa laitteiston asennuksessa, käytössä,

kunnossapidossa ja huollossa SAMES KREMLIN in

suosituksia sekä kansallisia ja/tai paikallisia

määräy ksiä,

•

Varmistaa, että laitteiston käyttäjät ovat

koulutettuja ja y mmärtäv ät täy sin

turv allisuusmääräy kset ja miten niitä sov elletaan.

Dla zapewnienia bezpiecznego użytkowania na

użytkowniku spoczywa obowiązek:

• Przed uruchomieniem urządzenia należy

dokładnie przeczy tać wszystkie dokumenty ,

• Instalowania, uży tkowania, konserwacji i naprawy

urządzenia zgodnie z zaleceniami f irmy SAMES

KREMLIN oraz z przepisami miejscowy mi,

• Upewnienia, że wszyscy przeszkoleni

uży tkownicy urządzenia zrozumieli zasady

bezpieczeństwa i stosują się do nich.

Pro bezpečné používání jste povinni:

• Před uv edením zařízení do prov ozu si pečliv ě

přečtěte všechny dokumenty,

• Nainstalov at, použív at, udržov at a oprav ov at

zařízení v souladu s

poky ny f irmy SAMES

KREMLIN a s národními a/nebo místními

legislativ ními předpisy ,

• Ujistit se, že uživatelé tohoto zařízení by li

v y školeni, že dokonale pochopili bezpečnostní

prav idla a že je dodržují.

Za varno uporabo ste dolžni:

• pred začetkom uporabe opreme natančno

preberite v se dokumente,

• inštalirati, uporabljati, v zdržev ati in poprav ljati

opremo po določilih SAMES KREMLIN in v skladu z

v eljav nimi nacionalnimi in/ali lokalnimi predpisi,

• poskrbeti, da so uporabniki te opreme ustrezno

usposobljeni, poznajo v arnostne predpise in da jih

upoštev ajo.

V záujme bezpečného je vašou povinnosťou:

• pred uv edením zariadenia do prev ádzky si

pozorne prečítajte v šetky dokumenty ,

• nainštalovať, použív ať, udržiavať a oprav ov ať

zariadenie v súlade s odporúčaniami spoločnosti

SAMES KREMLIN a národnými a/alebo miestny mi

predpismi,

• uistiť sa, že použív atelia tohto zariadenia boli

zaškolení, riadne porozumeli prav idlám bezpečnosti a

použív ajú ich.

A biztonságos használat érdekében az Ön

felelőssége, hogy:

•

Olv assa el f igy elmesen az összes

dokumentumot, mielőtt a berendezést üzembe

hely ezi,

• a berendezést a SAMES KREMLIN ajánlasainak

v alamint a nemzeti és/v agy hely i szabály ozásoknak

megf elelően hely ezze üzembe, használja, tartsa

karban és javítsa,

•

megbizony osodjon róla, hogy a berendezés

f elhasználói képzettek, tökéletesen megértették és

alkalmazzák a biztonsági előírásokat.

Pentru o utilizare sigură, este responsabilitatea

dvs. să:

• Citiți cu atenție toate documentele înainte de a

pune echipamentul în f uncțiune,

• Instalaţi, utilizaţi, întreţineţi şi reparaţi

echipamentul conf orm instrucţiunilor SAMES

KREMLIN precum şi reglementărilor naţionale şi/sau

locale,

• Vă asiguraţi că utilizatorii acestui echipament au

f ost instruiţi, au înţeles perf ect regulile de securitate

şi le aplică integral.

Déclaration(s) de conf ormité au v erso de ce document / Declaration(s) of conf ormity at the back of this document / Konf ormitätserklärung(en) auf der Rückseite dieser

Unterlage / Declaración (es) de conf ormidad en el rev erso de este documento / Dichiarazione/i di conf ormità sul retro del presente documento

/ Declaração(ções) de conf ormidade no v erso do documento / Conf ormiteitsv erklaring(en) op de keerzijde v an dit document / Försäkran om öv erensstämmelse på

omstående sida av detta dokument / Vaatimustenmukaisuusv akuutukset tämän asiakirjan kääntöpuolella / Deklaracja(e) zgodności na odwrocie dokumentu

/ Prohlášení o shodě se nachází/nacházejí na zadní straně tohoto dokumentu / Deklaracija(e) o skladnosti na hrbtni strani tega dokumenta / Vy hlásenie/-a o zhode sa

nachádzajú na zadnej strane dokumentu / A dokumentum hátlapján szereplő megfelelőségi ny ilatkoz(ok) / Declaraţii de conf ormitate pe v ersoul acestui document

SAMES KREMLIN - 2 - N° : 578.008.130-2106

DECLARATION UE DE CONFORMITE

EU DECLARATION OF CONFORMITY

EU- KONFORMITÄTSERKLÄRUNG

DECLARACIÓN UE DE CONFORMIDAD

DICHIARAZIONE DI CONFORMITÀ UE

DECLARAÇÃO UE DE CONFORMIDADE

EU-CONFORMITEITSVERKLARING

EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

EU- VAATIMUKSENMUKAISUUSVAKUUTUS

DEKLARACJA ZGODNOŚCI UE

EU PROHLÁŠENÍ O SHODĚ

IZJAVA EU O SKLADNOSTI

VYHLÁSENIE O ZHODE

EU-MEGFELELŐSÉGI NYILATKOZAT

DECLARAŢIA DE CONFORMITATE UE

Le fabricant / The manufacturer / Der Hersteller

/ El fabricante / Il produttore / O fabricante

/ De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce

/ Proizvajalec / Výrobca / Gyártó / Fabricantul:

SAM ES KREM LIN SAS

13, chemin de Malacher

38 240 - MEYLAN - FRA NCE

Tél. : 33 (0)4 76 41 60 60

Déclare que le matériel désigné ci-après / Herew ith declares that the equipment / erklärt hiermit, dass die / Declara que el material designado a

continuación / Dichiara che il materiale sottoindicato / Declara que o material a seguir designado / verklaart dat de hieronder aangeduide

apparatuur

/ Kungör att den utrustning som anges här nedan / ilmoittaa, että alla mainitut laitteistot / Ośw iadcza, że w ymienione poniżej urządzenia /

Prohlašuje, že níže uvedené vybavení / Izjavlja, da je opisana oprema spodaj / Vyhlasuje, že zariadenie uvedené nižšie / Kijelenti, hogy a

megjelölt anyag a továbbiakban / Declară că echipamentul precizat mai jos:

PISTOLETS AUTOMATIQUES DE PULVERISATION PNEUMATIQUES / AIRSPRAY AUTOMATIC SPRAYING GUNS

/ AUTOMATIK LUFTSPRITZPISTOLEN / PISTOLAS AUTOMÁTICAS DE PULVERIZACIÓN NEUMÁTICAS

A 25

A 25 F

A 28

A 29

A 35

A 3

Est conforme à la législation d’harmonisation de l’Union applicable suivante / Is in conformity w ith the relevant Union harmonisation legislation /

Erfüllt die einschlägigen Harmonisierungsrechtsvorschriften der Union / es conforme con la legislación de armonización pertinente de la Unión /

è conforme alla pertinente normativa di armonizzazione dell’Unione / in overeenstemming met de desbetteffende harmonisatiew etgeving van de

Unie / med den relevanta harmoniserade unionslagstiftningen / on asiaa koskevan unionin yhdenmukaistamislainsäädännön vaatimusten

mukainen / jest zgodny z odnośnymi w ymaganiami unijnego praw odaw stw a harmonizacyjnego / Shoduje se s následující příslušnou

evropskou harmonizační legislativou

/ V skladu s harmonizirano zakonodajo Unije / Je v súlade s uplatniteľnými harmonizačnými právnymi predpismi EÚ / Megfelel a következő

alkalmazandó uniós harmonizációs szabályozásnak / Este conform cu legislaţia aplicabilă de armonizare de mai jos

Directive ATEX / ATEX Directive /

ATEX Richtlinie / Directiva ATEX / Direttiva ATEX / Diretiva ATEX

/ A TEX-Richtijn / A TEX-direktivet / A TEX-direktivi / Dyrektyw a ATEX / Směrnice ATEX / Direktiva ATEX / Smernica ATEX

/ A TEX-irányelv

2014/34/UE

II 2G Ex h IIB T6 Gb X

NF EN ISO 80079-36 Juin 2016

NF EN ISO 80079-37 Juin 2016

NF EN 1127-1 Août 2019

Ex h=> Protection par sécurité de construction (c) / Protection by constructional safety (c) / Schutz durch konstruktive

Sicherheit (c) / Protección por seguridad constructiva (c) / Protezione per sicurezza costruttiva (c) / Protecção por

segurança construtiva (c) / Bescherming door constructieveiligheid (c) / Säker konstruktion (c) / Suojaus rakenteellisella

turvallisuudella (c) / Zabezpieczenie za pomocą bezpieczeństw a konstrukcyjnego (c) / Ochrana bezpečnou konstrukcí

Protecție prin securitate constructivă (c)

INERIS 0080 - 60550 Verneuil-en-Halatte - France - 036594/21

SAMES KREMLIN - 3 - N° : 578.008.130-2106

La présente déclaration de conformité est établie sous la seule responsabilité du fabricant / This declaration of conformity is issued under

the sole responsibility of the manufacturer / Die alleinige Verantw ortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller

/ La presente declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante / La presente dichiarazione di

conformità è rilasciata sotto la responsabilità esclusiva del fabbricante / A presente declaração de conformidade é emitida sob a exclusiva

responsabilidade do fabricante / Deze conformiteitsverklaring w ordt verstrekt onder volledige verantw oordelijkheid van de fabrikant / Denna

försäkran om överensstämmelse utfärdas på tillverkarens eget ansvar / Tämä vaatimustenmukaisuusvakuutus on annettu valmistajan

yksinomaisella vastuulla / Niniejsza deklaracja zgodności w ydana zostaje na w yłączną odpow iedzianość producenta / Toto prohláŝení o

skodě se vydává na výhradní odpovědnost výrobce / Za izdajo te izjave o skladnosti je odgovoren izključno proizvajalec / Toto vyhlásenie o

zhode sa vydáva / na vlastnú zodpovednosť výrobcu / Ezt a megfelelőségi nylatkozatot a gyártó kizárólagos felelőssége mellett adják ti /

Prezenta declaraţie de conformitate este emisă pe răspunderea exclusivă a producătorului.

Hervé WALTER

Directeur Recherche & Développement / Research &

Development Director / Direktor für Forschung &

Entw icklung / Director de Investigación y Desarrollo /

Direttore Ricerca e sviluppo / Diretor de Pesquisa e

desenvolvimento / Manager Onderzoek en Ontw ikkeling /

Direktör för Forskning och Utveckling / Johtaja tutkimus ja

kehitys / Dyrektor ds. Badań i rozw oju / Ředitel výzkumu a

vývoje / Direktor za raziskave in razvoj / Riaditeľ pre

výskum a vývoj / Kutatási és Fejlesztési Igazgató / Director

de cercetare și Dezvoltare

Fait à Meylan, le / Established in Meylan, on / Geschehen zu Meylan, am / En Meylan, a / Redatto a Meylan, / Vastgesteld te Meylan, /

Utformat i Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, /

Întocmită la Meylan, pe data de 24/06/2021 - 06/24/2021

SAMES KREMLIN N° : 578.001.130-UK-1804

INSTALLATION AND SAFETY

INSTRUCTIONS

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT :Before assembly and start-up, please read and clearly understand all the

documents relating to this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.001.130-UK-1804

1. SAFETY INSTRUCTIONS

GENERAL SAFETY INSTRUCTIONS

CAUTION : The equipment can be dangerous if you do not follow our

instructions concerning installation and servicing described in this manual

and in accordance with applicable European standards and local national safety

regulations.

Please carefully read all the instruction literature before operating your

equipment.

Only trained operators can use the equipment.

The foreman must ensure that the operator has understood the safety instructions for this equipment as

well as the instructions in the manuals for the different parts and accessories.

Read carefully all instruction manuals, label markings before operating the equipment.

Incorrect use may result in injury. This equipment is for professional use only. It must be used only for

what it has been designed for. Never modify the equipment. The parts and accessories supplied must be

regularly inspected. Defective or worn parts must be replaced.

Guards (motor cover, coupling shields, connectors,…) have been designed for a

safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

property damage due to destruction, the overshadowing or the partial or total

removal of the guards.

Never exceed the equipment components' maximum working pressure.

Comply with regulations concerning safety, fire risks, electrical regulations in force in the country of final

destination of the material. Use only products or solvent compatible with the parts in contact with the

material (refer to data sheet of the material manufacturer).

PICTOGRAMS

ADFECG

NIP HAZARD WARNING

MOVING

ELEVATOR

WARNING

MOVING PARTS WARNING

MOVING SHOVEL DO NOT

EXCEED THIS

PRESSURE

HIGH

PRESSURE

HAZARD

HJLKMQ

RELIEF OR

DRAIN VALVE WARNING

HOSE UNDER

PRESSURE

WEAR GLASSES

OBLIGATORY WEAR OF

GLOVES IS

OBLIGATORY

PRODUCT

VAPOR

HAZARDS

WARNING

HOT PARTS OR

AREAS

NPR

ELECTRICAL

HAZARD WARNING

FIRE HAZARDS EXPLOSION

HAZARDS GROUNDING WARNING

(USER) WARNING

SERIOUS

INJURIES

SAMES KREMLIN - 2 - N° : 578.001.130-UK-1804

PRESSURE HAZARDS

Current legislation requires that an air relief valve be fitted in the air supply circuit to the air

motor to prevent over pressurisation. This safety feature,ensures that it is not possible to supply

the air motor with excessive air pressure that may cause injury.

Please ensure that a material drain valve is fitted in the fluid circuit to drain and depressurise the

circuit. Once depressurised and drained, work /servicing may then commence on the equipment

Please remember to close these valves when restarting the system.

HIGH PRESSURE INJECTION HAZARDS

When working with high pressure equipment, special care is required. Fluid leaks can occur.

There is a risk of material being injected to any exposed parts of body, this could cause severe

injury :

medical care must be sought immediately if paint is injected under the skin or in other

parts of the body (eyes, fingers).

never point the spray gun at any one. Never try to stop the spray with your hands or fingers

nor with rags or similars.

follow the shut down procedure and always depressurize air and fluid circuits before

carrying out any servicing on the gun (cleaning, checking, maintenance of the material or

cleaning of the gun nozzles).

for the guns equipped with a safety device, always lock the trigger when not in use.

FIRE - EXPLOSION - SPARKS - STATIC ELECTRICITY HAZARDS

A poor earth connection, inadequate ventilation, sparks or static electricity can cause an

explosion or fire. to avoid these risks when using or servicing SAMES KREMLIN equipment, the

following safety procedures must be followed :

ensure a good earth connection and ground the parts to be handled i.e. solvents, materials,

components and equipment,

ensure adequate ventilation,

keep working area clean and free from waste solvents, chemicals, or solid waste i.e. rags,

paper and empty chemicals drums,

never use electrical switches / power if in an atmosphere of volatile solvent vapour,

stop working immediately in case of electrical arcs,

never store chemicals and solvents in the working area.

use paint whose flash point is the highest possible to prevent from any formation of gas

and inflammable vapours (refer to materials' safety instructions),

install a cover on the drums to reduce the diffusion of gas and vapours in the spraybooth.

TOXIC PRODUCT HAZARDS

Toxic products or vapours can cause severe injury not only though contact with the body, but also

if the products are ingested or inhaled. It is imperative :

to know the material products and their risks,

notified or hazardous materials must be stored in accordance with the regulations,

the material must be stored in an appropriate container, never place materials in a

container where there is a risk of spillage or leakage,

a procedure must be applied for the safe disposal of waste material. It must comply with all

prevailing regulations and legislations of the country where the equipment is to be used,

protective clothing should always be worn in compliance with the material manufacturers'

recommendations,

depending on the application and chemical safety instructions, safety glasses, hearing

protective earplug, gloves, foot wear, protective masks and possible breathing equipment

should be worn to comply with the regulations (Refer to chapter "Safety equipment of

SAMES KREMLIN selection guide).

SAMES KREMLIN - 3 - N° : 578.001.130-UK-1804

CAUTION!

It is forbidden to use material containing high concentrations of halogenated hydrocarbon

solvents with aluminium or zinc fillers .Non-compliance with the instructions may cause

explosion risk causing serious or fatal injury.

EQUIPMENT REQUIREMENTS

Guards (motor cover, coupling shields, connectors,…) have been designed for

a safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure

and / or property damage due to destruction, the overshadowing or the

partial or total removal of the guards.

PUMP

Before carrying out any work, it is imperative to read and clearly understand the disassembly and

reassembly instructions before servicing. The operator must understand the equipment and the

safety instructions. These instructions are available in the equipment manuals.

The air motor is designed to be mounted with a pump. Never modify any components or

couplings. When operating, please keep hands away from moving parts. Before starting up the

equipment, please read the PRESSURE RELIEF instructions. Please ensure that any relief or

drain valves fitted are in good working order.

HOSES

Keep hoses out of circulation areas, moving parts or hot surfaces,

Never expose product hoses to temperature higher than + 60°C / 140° F or lower than 0°C

/ 32° F,

Never pull or use the hoses to move the equipment,

Tighten all fittings as well as the hoses before operating the equipment,

Check the hoses regularly; change them if they are damaged,

Never exceed the maximum working pressure (MWP) indicated on the hose.

USED PRODUCTS

Considering the wide variety of products that are available and can be used in our equipment it is

impossible to check and make recommendations for all chemical data,regarding the risks of

possible chemical attack and their long term chemical reaction

SAMES KREMLIN can not be held liable for :

compatibility of wetted parts,

risks to staff and the surroundings,

for worn or defective parts, for faulty equipment or units, or the qualitiy of final product.

It is the responsibility of the user to know and prevent any possible risks such as toxic vapours,

fires or explosions. He shall determine the risks of immediate reactions or pursuant to repeated

exposures of the staff,

SAMES KREMLIN shall not be liable for physical injuries, direct or indirect material damages

caused by the use of chemicals.

SAMES KREMLIN - 4 - N° : 578.001.130-UK-1804

2. HANDLING

Check the weight and the dimensions of the equipment

(



refer to 'Technical features' section of the instruction manual

If weight and dimensions are too important, the unloading must be carried out by means of a forklift or

any other appropriate means with a qualified personnal and in a clear horizontal area to prevent from

risks of damage injury or an accident.

The centre of gravity is not in the centre of the machine : carry out by hand a stability-test after having

lifted the whole at 10 cm / 3.937" maximum.

After the unloading, the handling of the whole (eg: elevator pump) is carried out by means of a pallet

truck taking the bottom part of the frame.

Remark : Each pump motor is fitted with a ring. The ring is designed for the hoisting of one

pump and can not be used for the handling of the complete assembly.

3. STORING

Storing before installation :

- Storing ambient temperature : 0 / +50 °C / 0 / +122°F

- Protect the whole against dust, water trickling, dampness and shocks.

Storing after installation :

- Operating temperature : +15 / +35 °C / +59 / +138.2° F

- Protect the whole against dust, water tricling, dampness and shocks.

4. INSTALLATION OF THE EQUIPMENT

The machine is installed on a stable horizontal floor (for eg a concrete flag).

The machine shall be made stable by the use of holding down bolts or by the use of other anchoring

methods, strong enough to prevent unintended bodily movement of the equipment.

To avoid risks caused by static electricity, the equipment as well as its components must

be grounded.

For the pumping equipments (pumps, pneumatic rams, frame…), a section wire of 2.5

mm² is fixed on the material. Use this wire to connect the material to “the general ground”.

In case of severe environments (mechanical protection of the wire of earthing insufficient,

vibrations, mobile material…) where function damages at the ground are probable, the user

have to replace the provided wire of 2.5 mm² by a device more adapted to its environment

(wire with a more important section, bonding strip, fixing by thimble with eyelet…).

The continuity of the ground must be controlled by a qualified electrician. If the continuity of

the ground is not ensured, check the terminal, the wire and the earthing point. Never use the

material without have solved this problem.

In the severe cases of environments (mechanical protection of the wire of earthing

insufficient, vibrations, mobile material…) where damages of the function put at the ground

are probable, the user will have to replace the wire of 2.5 mm² provided, by a device more

adapted to its environment (wire of more important section, bonding strip, fixing by thimble

with eyelet…),

The gun must be 'grounded' via a material hose or an air hose. In case of spraying by

means of a gun with cup, the air hose must be conductive,

The materials to be painted must also be grounded.

All the materials situated in the working area shall be grounded.

SAMES KREMLIN - 5 - N° : 578.001.130-UK-1804

Never store more than necessary inflammable materials inside the working area,

The materials must be stored into approved drums and grounded,

Use only grounded metals containers for the use of cleaning solvents,

Cardboard and paper are prohibited.

5. MARKING OF THE EQUIPMENT

Each equipment has a label plate with the name of the manufacturer, the equipment part number,

the interesting informations to use correctly the equipment (pressure, voltage,…) and sometimes

the above pictogram.

The equipment is designed with and consists of high quality materials and components which can

be re-used.

The 2012/19/UE European Directive covers all equipments with a crossed-out bin pictogram.

Please inform yourself about the collection systems for electric and electronic equipments.

Please act in accordance with local rules and do not dispose of old equipment with household

wastes. A correct disposal of old equipment will help prevent negative consequences for the

environment and health.

SAMES KREMLIN N° : 578.188.110-UK-1802

AUTOMATIC AIRSPRAY

GUN

A 3

Disassembly / Reassembly

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to the equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NOT CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.188.110-UK-1802

CAUTION :

Before any intervention on the gun, shut off the compressed air supply and

depressurize the circuits controlling the opening of the gun.

The gun is manufactured under the ATEX agreement and can not be modified.

SAMES KREMLIN will not be held responsible for any failure to comply with that

instruction.

S 1

15 26

17 18 20 21

22 23

25 A 1

A 1

A 1 A 1

C 1

C 2

Ind. Instructions Description Part number

A 1 PTFE grease "TECHNILUB" grease

(10 ml) 560.440.101

C 1 Medium strength

- Aneorobic Pipe sealant Loctite 577 (250 ml / 0.066 US gal) 554.180.015

C 2 Low strength

- Anaerobic Adhesive Loctite 222 (50 ml / 0.013 US gal) 554.180.010

S 1 Screwing torque :

18 Nm / 13.28 ft/lbf

SAMES KREMLIN - 2 - N° : 578.188.110-UK-1802

Before removing a component of the gun, some precautions have to be respected :

-Empty out the paint inside the cup or the receiver.

-Fill the cup or the receiver with cleaning solvent.

-Decrease the supply air pressure of the gun.

-Spray the solvent until it runs clear.

-Shut off the supply air pressure of the gun.

-Shut off the material pressure.

-Trigger the gun to depressurize the circuit.

-Empty out the solvent when using a gravity cup.

-Remove the part to be cleaned or changed.

Before reassemblying the different components, some precautions must be taken :

-Clean all the parts with the appropriate cleaning solvent and a brush.

-Install new seals if it is necessary after having lubricated them with PTFE grease.

-Install new parts if it is necessary.

PISTON PACKING (18)

Unscrew cylinder (23) - (take care not to damage the spring 22).

Take hold of the entire needle and piston assembly (10 and 16) and pull them towards the back.

Unscrew nut (21). Remove support washer (20) as well as packing (18).

Clean the parts and change them if necessary.

When reinstalling :

Before inserting piston (17), the packing lip (18) must be shaped by hand as shown opposite.

Glue nut (21) on piston (17) with Low strength - Aneorobic Adhesive - Loctite 222. Change seal (19).

2310 2220 211719 18

SAMES KREMLIN - 3 - N° : 578.188.110-UK-1802

PACKING HOLDER (13)

Unscrew cylinder (23) - (take care not to damage the spring 22).

Take hold of the entire needle and piston assembly (10 and 16) and pull them towards the back.

Unscrew sleeve (26).

Remove the packing holder (13) by the rear part of the spray gun.

Clean the inside of the spray gun with solvent and blow out with air.

Change packing holder (13).

When reinstalling, drive packing holder by pushing it inside the body until it comes into contact with

the body.

Replace all the parts and change the seals.

2316 2210261514

Doc. 573.294.050

Date/Datum/Fecha : 22/06/21

Annule/Cancels/

Ersetzt/Anula : 22/02/18

Modif. / Änderung : Mise à jour

/ Update / Aktualisierung

/ Actualización

+#135 713 020, 135 713 021,

135 713 022, 135 713 018,

135 713 019

Pièces de rechange

Spare parts l ist

Ersatzteilliste

Piezas de repuesto

PISTOLET AUTOMATIQUE A 3 A 3 AUTOMATIC SPRAY GUN

AUTOMATIKPISTOLE A 3 PISTOLA AUTOMÁTICA A 3

SAMES KREM LIN 2 Doc. / Dok. : 573.294.050

A 3 Modèle standard / standard model

Standard Modell / Tipo estandard

Modèle Inox / Stainless steel model

Edelstahl Modell / Tipo Inox

+ 08 PX

+ 10 PX

+ 12 PX

135 713 014

135 713 011

135 713 012

135 713 020

135 713 021

135 713 022

+ 06 GL

+10 GL

135 713 017

135 713 015

135 713 018

135 713 019

Projecteur / Projector

Zerstäubereinheiten

/ Proyector

Tête / Aircap

Luftkappe / Cabezal

Buse / Nozzle

Düse / Boquilla

Pointeau / Needle

Nadel / Aguja

Ind. 1+7+11 # Ind. 1 # Ind. 7 Ø (mm / ")

# Ind. 11 #

08 PX

10 PX

12 PX

031 713 014

031 713 011

031 713 012

132 631 100

0,8 / 0.03

1,0 / 0.039

1,2 / 0.047

134 630 400

134 630 100

134 630 200

033 713 400

033 713 000

033 713 100

06 GL

10 GL

031 713 017

031 713 015

132 640 100

06 GL

10 GL

0,6 / 0.024

1,0 / 0.039

134 640 300

134 640 100

04 06 GL

10 GL

033 713 500

033 713 300

PIECES DE RECHANGE - PARTS IDENTIFICATION LIST - ERSATZTEILLISTE - PIEZAS DE REPUESTO

Ind # Désignation Description Bezeichnung Denominación Qté

- Tête complète

(voir tableau) Aircap assembly

(refer to chart) Zerstäuberkopf kpl.

(siehe Tabelle) Cabezal completo

(consultar cuadro) 1

029 630 004

• Bague de tête • Aircap ring • Überwurfring • Anillo del cabezal 1

NC / NS • Tête nue • Aircap only • Zerstäuberkopf • Cabezal solo 1

032 630 102

• Anneau de retenue • Stop ring • Sicherungsring • Anillo de retención 1

- Buse équipée

(voir tableau)

Nozzle assembly

(refer to chart)

Düse kpl.

(siehe Tabelle)

Boquilla equipada

(consultar cuadro)

NC / NS • Buse • Nozzle • Düse • Boquilla 1

134 639 901

•

Joint de buse (les 5)

• Seal, nozzle (pack of 5)

• O-Ring, Düse (5 St.) •

Junta de boquilla (x 5)

*10

- Pointeau complet

(voir tableau)

Needle assembly

(refer to chart)

Farbnadel kpl.

(siehe Tabelle)

Aguja completa

(consultar cuadro)

SAMES KREM LIN 3 Doc. / Dok. : 573.294.050

Ind # Désignation Description Bezeichnung Denominación Qté

*13

129 479 902

Porte-garniture

équipé (les 4)

Packing-holder

assembly (pack of 4)

Packungshalter (4 St.)

Porta-guarnición

equipada (bolsa de 4)

NC / NS • Porte-garniture • Packing • Nadelpackung • Porta-guarnición 1

129 529 906

• Joint (les 10) • O-Ring (x 10) • O-Ring (10 St.) • Junta (x 10) 2

*16

029 712 200

Piston équipé Piston assembly Kolben, kpl. Pistón equipado 1

NC / NS • Piston seul • Piston only • Kolben, einzeln • Pistón solo 1

029 711 302

• Garniture • Packing, piston • Kolbenmanschette • Garnición del pistón 1

129 400 915

• Joint R5A en FPM

(élastomères

fluorés) (les 10)

• Seal, R5A FPM

(fluorous elastomers)

(pack of 10)

• O-Ring R 5A FPM

(Elastomer Fluor) (10

St.)

• Junta R5A, FPM

(elastómeros

fluorados) (Bolsa de

10)

029 711 303

• Rondelle d'appui • Support washer • Stützscheibe • Arandela de apoyo 1

029 711 304

• Ecrou • Nut • Mutter • Tuerca 1

*22

050 312 501

Ressort de piston Spring, piston Feder für Kolben Muelle de pistón 1

029 711 400

Cylindre équipé Cylinder assembly Luftzylinder, kpl. Cilindro equipado 1

129 713 015

• Butée de pointeau • Adjustement knob • Nadelanschlag • Tope de aguja 1

NC / NS Corps équipé Body assembly Pistolenkörper Cuerpo 1

029 410 003

• Fourreau • Sleeve • Nadelführung • Vaina 1

029 713 002

• Raccord

M 12x100 - F 1/8

NPS

• Fitting

M 12x100 - F 1/8 NPS

• Anschluss M 12x1,00

AG - IG 1/8 NPS

• Racor

M 12x100 - H 1/8 NPS

905 124 901

• Raccord

M 1/8 BSP - T 4x6

(air de commande)

• Fitting

M 1/8 BSP - T 4x6

(control air)

• Anschluss für

Steuerluft AG 1/8 BSP

- Schlauch 4x6

• Racor

M 1/8 BSP - T 4x6

(air de commande)

029 711 102

• Axe de fixation • Pin, gun mounting • Achs e für Pistolen

Halterung

• Eje 1

029 711 001

Vis pointeau Fan adjustment Spritzstrahl

Regulierschraube

Regulador abanico 1

029 711 002

Contre-écrou Lock nut Kontermutter Contra tuerca 1

906 333 108

Bouchon F 1/8 NPT

(pour montage sans

circulation)

Plug F 1/8 NPT

(for mounting without

circulation)

Stopfen AG 1/8 NPT

(für Montage ohne

Zirkulation)

Tapón H 1/8 NPT

(montaje sin

circulación)

* Pièces de maintenance préconisées.

* Preceding the index number denotes a suggested spare part.

* Bezeichnete Teile sind empfohlene Ersatzteile.

* Piezas de mantenimiento preventivas.

N C : Non commercialisé.

N S : Denotes parts are not serviceable.

N S : Bezeichnete Teile gibt es nicht einzeln, sondern nur

komplett.

N S : no suministrado.

SAMES KREM LIN 4 Doc. / Dok. : 573.294.050

ACCESSOIRES - ACCESSORIES - ZUBEHÖR - ACCESORIOS

Ind # Désignation Description Bezeichnung Denominación Qté

049 030 021 Clé plate Gun wrench Pistolenschlüssel Llave para pistola 1

906 300 102 Goupillon PM Small size brush Pistolenreinigungsbürste Cepillo pequeño 1

Ind. 41

Ind. 42

A LA D E M AN DE - ON REQUEST - AUF ANFRAG E - A PETICIÓN

Ind. 44

Ind. 45

Ind # Désignation Description Bezeichnung Denominación Qté

129 713 050 Kit de réglage indexé au

pointeau

Indexed needle adjust kit Indexiertes

Nadeleinstellset

Kit de regulación

indexado para el botón

aguja

049 351 200 Support de fixation pour

pistolet (∅ 16 mm - long.

70 mm)

Gun mounting support

(diameter : 16mm / 5/8"

- length : 70mm / 2-3/4")

Pistolenhalterung

(∅ 16 - Länge 70 mm)

Soporte de fijación para

pistola (∅ 16 mm

- 70 mm de largo)

905 160 105 Coude

M 1/8 NPT - M 1/2 JIC

(arrivée produit)

Elbow

M 1/8 NPT - M 1/2 JIC

(fluid inlet)

Winkelnippel

AG 1/8 NPT - AG 1/2 JIC

(Materialeingang)

Codo

M 1/8 NPT - M 1/2 JIC

(entrada de producto)

SAMES KREMLIN N° : 578.052.110-UK-1712

AUTOMATIC AIRSPRAY GUN

PREVENTIVE MAINTENANCE

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.052.110-UK-1712

The gun is a precision instrument and it relies on good and frequent maintenance for its correct operation.

If stopped for a long time, lubricate all movable parts, axes and springs with grease.

Never use metal brushes files, points or clips for dismantling.

SHORT DURATION SHUTDOWN

Remove the paint on the air cap, with a brush and solvent. Otherwise, leave the equipment as it is.

Removing the paint will prevent the drying and clogging of the holes.

LONG DURATION SHUTDOWN

Shut off the gun fluid and air supply.

Depressurize the hoses by triggering the gun or by controlling the gun opening.

Unscrew the air cap. Remove the needle and then remove the fluid nozzle with the wrench provided.

Soak the needle, aircap, fluid nozzle in solvent and brush them carefully, as they are precision parts.

With a brush soaked in solvent, clean the internal parts of the gun. Wash carefully brush the

threated parts.

Flush the gun.

Do not soak the gun in solvent

Pagina se încarcă ...

Sames A3 Manual de utilizare

Marca: Sames

Model: A3

Categorie: Pulverizator de vopsea

Tip: Manual de utilizare

Descărcați PDF

raport

în alte limbi

English: Sames A3 User manual

Sames A3 Manual de utilizare

Sames A3 Manual de utilizare

în alte limbi

Lucrări conexe