Sames REGULEX 5 - 25 - 50CC Manual de utilizare

Marca: Sames

Model: REGULEX 5 - 25 - 50CC

Tip: Manual de utilizare

DOCUMENTATION

REGULEX® PROPORTIONING GUN

5, 25 & 50 CC

Manual : 582.231.110-UK - 2207

Date : 25/07/22

Supersede :

Modif.:

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents relating

to this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN N° : 578.001.130-UK-1804

INSTALLATION AND SAFETY

INSTRUCTIONS

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.001.130-UK-1804

1. SAFETY INSTRUCTIONS

GENERAL SAFETY INSTRUCTIONS

CAUTION : Th

e equipment can be dangerous if you do not follow our

instructions concerning installation and servicing described in this manual

and in accordance with applicable European standards and local national

safety regulations.

Please carefully read all the instruction literature before operating your

equipment.

Only trained operators can use the equipment.

The foreman must ensure that the operator has understood the safety instructions for this equipment

as well as the instructions in the manuals for the different parts and accessories.

Read carefully all instruction manuals, label markings before operating the equipment.

Incorrect use may result in injury. This equipment is for professional use only. It must be used only for

what it has been designed for. Never modify the equipment. The parts and accessories supplied must

be regularly inspected. Defective or worn parts must be replaced.

Guards (motor cover, coupling shields, connectors,…) have been designed for

a safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

property damage due to destruction, the overshadowing or the partial or total

removal of the guards.

Never exceed the equipment components' maximum working pressure.

Comply with regulations concerning safety, fire risks, electrical regulations in force in the country of

final destination of the material. Use only products or solvent compatible with the parts in contact with

the material (refer to data sheet of the material manufacturer).

PICTOGRAMS

NIP HAZARD WARNING

MOVING

ELEVATOR

WARNING

MOVING PARTS

WARNING

MOVING SHOVEL

DO NOT

EXCEED THIS

PRESSURE

HIGH

PRESSURE

HAZARD

RELIEF OR

DRAIN VALVE

WARNING

HOSE UNDER

PRESSURE

WEAR GLASSES

OBLIGATORY

WEAR OF

GLOVES IS

OBLIGATORY

PRODUCT

VAPOR

HAZARDS

WARNING

HOT PARTS OR

AREAS

ELECTRICAL

HAZARD

WARNING

FIRE HAZARDS

EXPLOSION

HAZARDS

GROUNDING WARNING

(USER)

WARNING

SERIOUS

INJURIES

PRESSURE HAZARDS

Current legislation requires that an air relief valve be fitted in the air supply circuit to the air

motor to prevent over pressurisation. This safety feature,ensures that it is not possible to supply

the air motor with excessive air pressure that may cause injury.

SAMES KREMLIN - 2 - N° : 578.001.130-UK-1804

Please ensure that a material drain valve is fitted in the fluid circuit to drain and depressurise the

circuit. Once depressurised and drained, work /servicing may then commence on the equipment

Please remember to close these valves when restarting the system.

HIGH PRESSURE INJECTION HAZARDS

When working with high pressure equipment, special care is required. Fluid leaks can occur.

There is a risk of material being injected to any exposed parts of body, this could cause severe

injury :

• medical care must be sought immediately if paint is injected under the skin or in other

parts of the body (eyes, fingers).

• never point the spray gun at any one. Never try to stop the spray with your hands or fingers

nor with rags or similars.

• follow the shut down procedure and always depressurize air and fluid circuits before

carrying out any servicing on the gun (cleaning, checking, maintenance of the material or

cleaning of the gun nozzles).

• for the guns equipped with a safety device, always lock the trigger when not in use.

FIRE - EXPLOSION - SPARKS - STATIC ELECTRICITY HAZARDS

A poor earth connection, inadequate ventilation, sparks or static electricity can cause an

explosion or fire. to avoid these risks when using or servicing SAMES KREMLIN equipment, the

following safety procedures must be followed :

• ensure a good earth connection and ground the parts to be handled i.e. solvents, materials,

components and equipment,

• ensure adequate ventilation,

• keep working area clean and free from waste solvents, chemicals, or solid waste i.e. rags,

paper and empty chemicals drums,

• never use electrical switches / power if in an atmosphere of volatile solvent vapour,

• stop working immediately in case of electrical arcs,

• never store chemicals and solvents in the working area.

• use paint whose flash point is the highest possible to prevent from any formation of gas

and inflammable vapours (refer to materials' safety instructions),

• install a cover on the drums to reduce the diffusion of gas and vapours in the spraybooth.

TOXIC PRODUCT HAZARDS

Toxic products or vapours can cause severe injury not only though contact with the body, but also

if the products are ingested or inhaled. It is imperative :

• to know the material products and their risks,

• notified or hazardous materials must be stored in accordance with the regulations,

• the material must be stored in an appropriate container, never place materials in a

container where there is a risk of spillage or leakage,

• a procedure must be applied for the safe disposal of waste material. It must comply with all

prevailing regulations and legislations of the country where the equipment is to be used,

• protective clothing should always be worn in compliance with the material manufacturers'

recommendations,

• depending on the application and chemical safety instructions, safety glasses, hearing

protective earplug, gloves, foot wear, protective masks and possible breathing equipment

should be worn to comply with the regulations (Refer to chapter "Safety equipment of

SAMES KREMLIN selection guide).

SAMES KREMLIN - 3 - N° : 578.001.130-UK-1804

CAUTION!

It is forbidden to use material containing high concentrations of halogenated hydrocarbon

solvents with aluminium or zinc fillers .Non-compliance with the instructions may cause

explosion risk causing serious or fatal injury.

EQUIPMENT REQUIREMENTS

Guards (motor cover, coupling shields, connectors,…) have been designed for

a safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure

and / or property damage due to destruction, the overshadowing or the

partial or total removal of the guards.

PUMP

Before carrying out any work, it is imperative to read and clearly understand the disassembly and

reassembly instructions before servicing. The operator must understand the equipment and the

safety instructions. These instructions are available in the equipment manuals.

The air motor is designed to be mounted with a pump. Never modify any components or

couplings. When operating, please keep hands away from moving parts. Before starting up the

equipment, please read the PRESSURE RELIEF instructions. Please ensure that any relief or

drain valves fitted are in good working order.

HOSES

• Keep hoses out of circulation areas, moving parts or hot surfaces,

• Never expose product hoses to temperature higher than + 60°C / 140° F or lower than 0°C

/ 32° F,

• Never pull or use the hoses to move the equipment,

• Tighten all fittings as well as the hoses before operating the equipment,

• Check the hoses regularly; change them if they are damaged,

• Never exceed the maximum working pressure (MWP) indicated on the hose.

USED PRODUCTS

Considering the wide variety of products that are available and can be used in our equipment it is

impossible to check and make recommendations for all chemical data,regarding the risks of

possible chemical attack and their long term chemical reaction

SAMES KREMLIN can not be held liable for :

• compatibility of wetted parts,

• risks to staff and the surroundings,

• for worn or defective parts, for faulty equipment or units, or the qualitiy of final product.

It is the responsibility of the user to know and prevent any possible risks such as toxic vapours,

fires or explosions. He shall determine the risks of immediate reactions or pursuant to repeated

exposures of the staff,

SAMES KREMLIN shall not be liable for physical injuries, direct or indirect material damages

caused by the use of chemicals.

SAMES KREMLIN - 4 - N° : 578.001.130-UK-1804

2. HANDLING

 Check the weight and the dimensions of the equipment

(



refer to 'Technical features' section of the instruction manual

If weight and dimensions are too important, the unloading must be carried out by means of a forklift

or any other appropriate means with a qualified personnal and in a clear horizontal area to prevent

from risks of damage injury or an accident.

The centre of gravity is not in the centre of the machine : carry out by hand a stability-test after

having lifted the whole at 10 cm / 3.937" maximum.

After the unloading, the handling of the whole (eg: elevator pump) is carried out by means of a pallet

truck taking the bottom part of the frame.

Remark : Each pump motor is fitted with a ring. The ring is designed for the hoisting of one

pump and can not be used for the handling of the complete assembly.

3. STORING

Storing before installation :

- Storing ambient temperature : 0 / +50 °C / 0 / +122°F

- Protect the whole against dust, water trickling, dampness and shocks.

Storing after installation :

- Operating temperature : +15 / +35 °C / +59 / +138.2° F

- Protect the whole against dust, water tricling, dampness and shocks.

4. INSTALLATION OF THE EQUIPMENT

The machine is installed on a stable horizontal floor (for eg a concrete flag).

The machine shall be made stable by the use of holding down bolts or by the use of other anchoring

methods, strong enough to prevent unintended bodily movement of the equipment.

To avoid risks caused by static electricity, the equipment as well as its components

must be grounded.

• For the pumping equipments (pumps, pneumatic rams, frame…), a section wire of 2.5

mm² is fixed on the material. Use this wire to connect the material to “the general

ground”. In case of severe environments (mechanical protection of the wire of earthing

insufficient, vibrations, mobile material…) where function damages at the ground are

probable, the user have to replace the provided wire of 2.5 mm² by a device more

adapted to its environment (wire with a more important section, bonding strip, fixing by

thimble with eyelet…).

The continuity of the ground must be controlled by a qualified electrician. If the continuity

of the ground is not ensured, check the terminal, the wire and the earthing point. Never

use the material without have solved this problem.

• In the severe cases of environments (mechanical protection of the wire of earthing

insufficient, vibrations, mobile material…) where damages of the function put at the

ground are probable, the user will have to replace the wire of 2.5 mm² provided, by a

device more adapted to its environment (wire of more important section, bonding strip,

fixing by thimble with eyelet…),

• The gun must be 'grounded' via a material hose or an air hose. In case of spraying by

means of a gun with cup, the air hose must be conductive,

• The materials to be painted must also be grounded.

All the materials situated in the working area shall be grounded.

SAMES KREMLIN - 5 - N° : 578.001.130-UK-1804

• Never store more than necessary inflammable materials inside the working area,

• The materials must be stored into approved drums and grounded,

• Use only grounded metals containers for the use of cleaning solvents,

•

Cardboard and paper are prohibited.

5. MARKING OF THE EQUIPMENT

Each equipment has a label plate with the name of the manufacturer, the equipment part

number, the interesting informations to use correctly the equipment (pressure, voltage,…) and

sometimes the above pictogram.

The equipment is designed with and consists of high quality materials and components which

can be re-used.

The 2012/19/UE European Directive covers all equipments with a crossed-out bin pictogram.

Please inform yourself about the collection systems for electric and electronic equipments.

Please act in accordance with local rules and do not dispose of old equipment with

household wastes. A correct disposal of old equipment will help prevent negative

consequences for the environment and health.

SAMES KREMLIN N° : 578.019.130-1702

578.019.130 1702

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

FR UK DE

Pour une utilisation sure, Il est de votre responsabilité

de :

Lire attentivement tous les documents contenus

dans le CD joint avant la mise en service de

l’équipement,

D’installer, d’utiliser, d’entretenir et de réparer

l’équipement conformément aux préconisations de

SAMES KREMLIN ainsi qu’aux réglementations

nationales et/ou locales,

Vous assurez que les utilisateurs de cet équipement

ont été formés, ont parfaitement compris les règles de

sécurité et qu’ils les appliquent.

To ensure safe use of the machinery, it is your

responsibility to:

Carefully read all documents contained on the

enclosed CD before putting the machinery into service,

Install, use, maintain and repair the machinery in

accordance with SAMES KREMLIN's recommendations

and national and/or local regulations,

Make sure that the users of the machinery have

received proper training and that they have perfectly

understood the safety rules and apply them.

Eine sichere Nutzung setzt voraus, dass Sie: :

alle in der CD enthaltenen Dokumente vor der

Inbetriebnahme der Anlage aufmerksam lesen,

die Anlage im Einklang mit den Empfehlungen von

SAMES KREMLIN sowie mit den nationalen und/oder

lokalen Bestimmungen installieren, verwenden,

warten und reparieren,

sich vergewissern, dass die Nutzer dieser Anlage

angemessen geschult wurden, die

Sicherheitsbestimmungen verstanden haben und sie

anwenden.

ES IT PT

Para una utilización segura, será de su

responsabilidad:

leer atentamente todos los documentos que se

incluyen en el CD adjunto antes de la puesta en servicio

del equipo,

instalar, utilizar, efectuar el mantenimiento y reparar

el equipo con arreglo a las recomendaciones de

SAMES KREMLIN y a la normativa nacional y/o local,

cerciorarse de que los usuarios de este equipo han

recibido la formación necesaria, han entendido

perfectamente las normas de seguridad y las aplican.

Per un uso sicuro, vi invitiamo a:

leggere attentamente tutta la documentazione

contenuta nel CD allegato prima della messa in

funzione dell'apparecchio,

installare, utilizzare, mantenere e riparare

l'apparecchio rispettando le raccomandazioni di SAMES

KREMLIN, nonché le normative nazionali e/o locali,

accertarvi che gli utilizzatori dell'apparecchio

abbiano ricevuto adeguata formazione, abbiano

perfettamente compreso le regole di sicurezza e le

applichino.

Para uma utilização segura, é da sua

responsabilidade:

Ler atentamente todos os documentos incluídos no

CD em anexo antes de pör o equipamento em

funcionamento,

Proceder à instalação, utilização, manutenção e

reparação do equipamento de acordo com as

preconizações de SAMES KREMLIN, bem como com

outros regulamentos nacionais e/ou locais aplicáveis,

Assegurar-se que os utilizadores do equipamento

foram devidamente capacitados, compreenderam

perfeitamente e aplicam as devidas regras de

segurança.

NL SE FI

Voor een veilig gebruik dient u:

alle document op de bijgevoegde cd aandachtig te

lezen alvorens het apparaat in werking te stellen,

het apparaat te installeren, gebruiken, onderhouden

en repareren volgens de door SAMES KREMLIN

gegeven aanbevelingen en overeenkomstig de

nationale en/of plaatselijke reglementeringen,

zeker te stellen dat de gebruikers van dit apparaat

zijn opgeleid, de veiligheidsregels perfect hebben

begrepen en dat zij die ook toepassen.

För en säker användning av utrustningen ansvarar ni

för följande:

Läs noga samtliga dokument som finns på den

medföljande cd-skivan innan utrustningen tas i drift.

Installera, använd, underhåll och reparera

utrustningen enligt anvisningarna från SAMES

KREMLIN och enligt nationella och/eller lokala

bestämmelser.

Försäkra er om att användare av denna utrustning

erhållit utbildning, till fullo förstått säkerhetsföreskrifterna

och tillämpar dem.

Käytön turvallisuuden varmistamiseksi

velvollisuutesi on:

Lukea huolella kaikki CD:llä olevat asiakirjat ennen

laitteiston käyttöönottoa,

Noudattaa laitteiston asennuksessa, käytössä,

kunnossapidossa ja huollossa SAMES KREMLIN in

suosituksia sekä kansallisia ja/tai paikallisia

määräyksiä,

Varmistaa, että laitteiston käyttäjät ovat koulutettuja

ja ymmärtävät täysin turvallisuusmääräykset ja miten

niitä sovelletaan.

PL CS SL

Dla zapewnienia bezpiecznego użytkowania na

użytkowniku spoczywa obowiązek:

 Uważnego zapoznania się ze wszystkimi

dokumentami znajdującymi się na załączonej płycie CD

przed pierwszym uruchomieniem urządzenia,

 Instalowania, użytkowania, konserwacji i naprawy

urządzenia zgodnie z zaleceniami firmy SAMES

KREMLIN oraz z przepisami miejscowymi,

 Upewnienia, że wszyscy przeszkoleni użytkownicy

urządzenia zrozumieli zasady bezpieczeństwa i stosują

się do nich.

Pro bezpečné používání jste povinni:

 Před uvedením zařízení do provozu si pozorně

přečíst veškeré dokumenty obsažené na přiloženém

CD,

Nainstalovat, používat, udržovat a opravovat

zařízení v souladu s pokyny firmy SAMES KREMLIN

a s národními a/nebo místními legislativními předpisy,

 Ujistit se, že uživatelé tohoto zařízení byli vyškoleni,

že dokonale pochopili bezpečnostní pravidla a že je

dodržují.

Za varno uporabo ste dolžni:

 natančno prebrati vse dokumente na CD pred

zagonom stroja,

inštalirati, uporabljati, vzdrževati in popravljati

opremo po določilih SAMES KREMLIN in v skladu z

veljavnimi nacionalnimi in/ali lokalnimi predpisi,

poskrbeti, da so uporabniki te opreme ustrezno

usposobljeni, poznajo varnostne predpise in da jih

upoštevajo.

SK HU RO

V záujme bezpečného je vašou povinnosťou:

 pozorne si prečítať všetky dokumenty obsiahnuté na

priloženom CD predtým, ako zariadenie uvediete do

prevádzky,

 nainštalovať, používať, udržiavať a opravovať

zariadenie v súlade s odporúčaniami spoločnosti

SAMES KREMLIN a národnými a/alebo miestnymi

predpismi,

 uistiť sa, že používatelia tohto zariadenia boli

zaškolení, riadne porozumeli pravidlám bezpečnosti a

používajú ich.

A biztonságos használat érdekében az Ön

felelőssége, hogy:

 a berendezés üzembe helyezése előtt figyelmesen

elolvassa a mellékelt CD által tartalmazott összes

dokumentumot,

a berendezést a SAMES KREMLIN ajánlasainak

valamint a nemzeti és/vagy helyi szabályozásoknak

megfelelően helyezze üzembe, használja, tartsa karban

és javítsa,

megbizonyosodjon róla, hogy a berendezés

felhasználói képzettek, tökéletesen megértették és

alkalmazzák a biztonsági előírásokat.

Pentru o utilizare sigură, este responsabilitatea dvs.

să:

 Citiţi cu atenţie toate documentele de pe CD-ul

anexat, înainte de punerea în funcţiune a

echipamentului,

 Instalaţi, utilizaţi, întreţineţi şi reparaţi echipamentul

conform instrucţiunilor SAMES KREMLIN precum şi

reglementărilor naţionale şi/sau locale,

 Vă asiguraţi că utilizatorii acestui echipament au

fost instruiţi, au înţeles perfect regulile de securitate şi

le aplică integral.

Déclaration(s) de conformité au verso de ce document / Declaration(s) of conformity at the back of this document / Konformitätserklärung(en) auf der Rückseite dieser Unterlage

/ Declaración (es) de conformidad en el reverso de este documento / Dichiarazione/i di conformità sul retro del presente documento

/ Declaração(ções) de conformidade no verso do documento / Conformiteitsverklaring(en) op de keerzijde van dit document / Försäkran om överensstämmelse på omstående sida

av detta dokument / Vaatimustenmukaisuusvakuutukset tämän asiakirjan kääntöpuolella / Deklaracja(e) zgodności na odwrocie dokumentu

/ Prohlášení o shodě se nachází/nacházejí na zadní straně tohoto dokumentu / Deklaracija(e) o skladnosti na hrbtni strani tega dokumenta / Vyhlásenie/-a o zhode sa nachádzajú na

zadnej strane dokumentu / A dokumentum hátlapján szereplő megfelelőségi nyilatkoz(ok) / Declaraţii de conformitate pe versoul acestui document

SAMES KREMLIN - 2 - N° : 578.019.130-1702

DECLARATION UE DE CONFORMITE

UE DECLARATION OF CONFORMITY

EU- KONFORMITÄTSERKLÄRUNG

DECLARACIÓN UE DE CONFORMIDAD

DICHIARAZIONE DI CONFORMITÀ UE

DECLARAÇÃO UE DE CONFORMIDADE

EU-CONFORMITEITSVERKLARING

EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

EU- VAATIMUKSENMUKAISUUSVAKUUTUS

DEKLARACJA ZGODNOŚCI UE

EU PROHLÁŠENÍ O SHODĚ

IZJAVA EU O SKLADNOSTI

VYHLÁSENIE O ZHODE

EU-MEGFELELŐSÉGI NYILATKOZAT

DECLARAŢIA DE CONFORMITATE UE

Le fabricant / The manufacturer / Der Hersteller

/ El fabricante / Il produttore / O fabricante

/ De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce

/ Proizvajalec / Výrobca / Gyártó / Fabricantul:

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - FRANCE

Tél. : 33 (0)4 76 41 60 60

Déclare que le matériel désigné ci-après / Herewith declares that the equipment / erklärt hiermit, dass die / Declara que el material designado a

continuación / Dichiara che il materiale sottoindicato / Declara que o material a seguir designado / verklaart dat de hieronder aangeduide apparatuur

/ Kungör att den utrustning som anges här nedan / ilmoittaa, että alla mainitut laitteistot / Oświadcza, że wymienione poniżej urządzenia / Prohlašuje,

že níže uvedené vybavení / Izjavlja, da je opisana oprema spodaj / Vyhlasuje, že zariadenie uvedené nižšie / Kijelenti, hogy a megjelölt anyag a

továbbiakban / Declară că echipamentul precizat mai jos:

PISTOLETS DOSEURS REGULEX® / REGULEX® PROPORTIONING GUNS

/ PISTOLAS DE DOSIFICACIÓN REGULEX®

MONOBLOC / COMPACTED RENFORCE / REINFORCED

5 cc 7 cc

25cc 27 cc

50 cc 47 cc

107 cc

Est conforme à la législation d’harmonisation de l’Union applicable suivante / Is in conformity with the relevant Union harmonisation legislation / Erfüllt

die einschlägigen Harmonisierungsrechtsvorschriften der Union / es conforme con la legislación de armonización pertinente de la Unión / è conforme

alla pertinente normativa di armonizzazione dell’Unione / in overeenstemming met de desbetteffende harmonisatiewetgeving van de Unie / med den

relevanta harmoniserade unionslagstiftningen / on asiaa koskevan unionin yhdenmukaistamislainsäädännön vaatimusten mukainen / jest zgodny z

odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego / Shoduje se s následující příslušnou evropskou harmonizační legislativou

/ V skladu s harmonizirano zakonodajo Unije / Je v súlade s uplatniteľnými harmonizačnými právnymi predpismi EÚ / Megfelel a következő

alkalmazandó uniós harmonizációs szabályozásnak / Este conform cu legislaţia aplicabilă de armonizare de mai jos

Directive Basse Tension / Low Voltage Directive / Niederspannung-Richtlinie / Directiva Baja Tensión / Direttiva Bassa

Tensione / Directiva de Baixa Tensão / Richtlijn Laagspanning / Lågspänningsdirektivet / Pienjännitedirektiivi / Dyrektywa

Niskonapięciowa / Směrnice Pro Nízké Napĕtí / Direktiva O Nizki Napetosti / Smernica O Nízkom Napätí / Feszültséghatárra

Vonatkozó Irányelv / Directiva Privind Tensiunile Joase

EN 60335-1

EN 60335-2-15

2014/35/UE

Directive Compatibilité Electromagnétique / Electromagnetic Compatibility Directive / Richtlinie Für Elektromagnetische

Verträglchkeit / Directiva de Compatibilidad Eletromagnética / Direttiva Compatibilita Elettromagnetica / Directiva relativa à

Compatibilidade Eletromagnética / Richtlijn Elektromagnetische Compatibiliteit / Direktivet om Eletktromagnetisk Kompatibilitet

/ EMC-direktivi / Dyrektywa Kompatybilności Elektromagnetycznej / Směrnice Pro Elektromagnetickou Kompatibilitu

/ Direktiva O Elektromagnetni Združljivost / Smernica O Elektromagnetickej Kompatibilite / Az Elektromágneses

Összeférhetőségre vonatkozó Irányelv / Directiva Privind Compatibilitatea Electromagnetică

2014/30/UE

SAMES KREMLIN - 3 - N° : 578.019.130-1702

La présente déclaration de conformité est établie sous la seule responsabilité du fabricant / This declaration of conformity is issued under the sole

responsibility of the manufacturer / Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller / La presente

declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante / La presente dichiarazione di conformità è rilasciata sotto la

responsabilità esclusiva del fabbricante / A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante / Deze

conformiteitsverklaring wordt verstrekt onder volledige verantwoordelijkheid van de fabrikant / Denna försäkran om överensstämmelse utfärdas på

tillverkarens eget ansvar / Tämä vaatimustenmukaisuusvakuutus on annettu valmistajan yksinomaisella vastuulla / Niniejsza deklaracja zgodności

wydana zostaje na wyłączną odpowiedzianość producenta / Toto prohláŝení o skodě se vydává na výhradní odpovědnost výrobce / Za izdajo te izjave

o skladnosti je odgovoren izključno proizvajalec / Toto vyhlásenie o zhode sa vydáva / na vlastnú zodpovednosť výrobcu / Ezt a megfelelőségi

nylatkozatot a gyártó kizárólagos felelőssége mellett adják ti / Prezenta declaraţie de conformitate este emisă pe răspunderea exclusivă a

producătorului.

Philippe PROVENAZ

Directeur Innovation & Développement / Innovation & Development

Director / Direktor für Innovation & Entwicklung / Director de

Inovación y Desarrollo / Direttore Innovazione e sviluppo

/ Diretor de Inovação / Manager Innovatie en Ontwikkeling / Direktör

för Forskning och Utveckling / Innovaatio- ja kehitysjohtaja

/ Dyrektor ds. Innowacji I Rozwoju / Ředitel pro inovace a vývoj

/ Direktor za inovacije in razvoj / Riaditeľ pre inováciu a rozvoj

/ Innovációs és fejlesztési igazgató / Director Inovaţie şi Dezvoltare

Fait à Meylan, le / Established in Meylan, on / Geschehen zu Meylan, am / En Meylan, a / Redatto a Meylan, / Vastgesteld te Meylan, / Utformat i

Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, / Întocmită la Meylan,

pe data de 01/02/2017 - 02/01/2017

INSTRUCTION MANUAL

REGULEX

FLOW REGULATOR

PROPORTIONING GUN

Manual : 2207 573.005.212

Date : 07/07/22 - Supersede : 06/07/11

Modif.: Update

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : before assembly and start-up, please read and clearly understand all documents

relating to this equipment (professional use only).

PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR

NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN Page 1 Manual : 573.005.212

INSTRUCTION MANUAL

REGULEX

FLOW REGULATOR PROPORTIONING GUN

SUMMARY

1. GENERAL SAFETY INSTRUCTIONS ........................................................................................................ 2

2. DESCRIPTION ............................................................................................................................................. 3

3. INSTALLATION ........................................................................................................................................... 5

4. OPERATING ................................................................................................................................................ 5

5. REGULEX® SHUTDOWN ........................................................................................................................... 8

6. MAINTENANCE ........................................................................................................................................... 8

7. TROUBLESHOOTINGS .............................................................................................................................. 9

8. DISASSEMBLY- ASSEMBLY ..................................................................................................................... 9

The specifications of the REGULEX® proportioning gun are available in a

documentation enclosed to the manual.

SAMES KREMLIN Page 2 Manual : 573.005.212

Dear Customer,

You are the owner of our new REGULEX® gun and we would like to take this opportunity to thank

you.

To make sure your investment will provide full satisfaction, special care has been taken by

SAMES KREMLIN during all designing and manufacturing processes.

To obtain the best result, safe and efficient operation of your equipment, we advice you to read and

make yourself familiar with this instruction and service manual. Indeed, the non-compliance with

instructions and precautions stated in this manual could reduce the equipment working-life, result in

operating trouble and create unsafe conditions.

1. GENERAL SAFETY INSTRUCTIONS

CAUTION : The equipment can be dangerous if you do not follow our

instructions concerning installation and servicing described in this

manual and in accordance with applicable European standards and local

national safety regulations.

Please carefully read all the instruction literature before operating your

equipment.

Only trained operators can use the equipment.

The foreman must ensure that the operator has understood the safety instructions for this

equipment as well as the instructions in the manuals for the different parts and accessories.

Read carefully all instruction manuals, label markings before operating the equipment.

Incorrect use may result in injury. This equipment is for professional use only. It must be used only

for what it has been designed for. Never modify the equipment. The parts and accessories

supplied must be regularly inspected. Defective or worn parts must be replaced.

Never exceed the equipment components' maximum working pressure.

Comply with regulations concerning safety, fire risks, electrical regulations in force in the country

of final destination of the material. Use only products or solvent compatible with the parts in

contact with the material (refer to data sheet of the material manufacturer).

 Refer to 'Installation and safety instructions' document

(doc. 578.001.130-UK)

SAMES KREMLIN Page 3 Manual : 573.005.212

2. DESCRIPTION

The REGULEX® system consists of a REGULEX® proportioning gun and a control bay.

The REGULEX® proportioning gun is designed to dispense mastic beads or single or two-component

adhesive beads.

The REGULEX® system is normally mounted on a robot or a multi-axis table. The manipulator sends

a signal to the control bay to provide the necessary output to dispense the bead.

The flow as well as the proportioning are programmable and electronically controlled thanks to the

control bay.

The following applications can be carried out :

 Constant diameter at constant speed.

 Variable diameter at contant speed.

 Constant diameter at variable speed.

 Variable diameter at variable speed.

The materials can be applied cold or hot depending upon the use conditions and the kind of

REGULEX® gun.

 The heating kit enables to maintain the temperature, the fluid must be heated first by means of

the filling pump and of the heated hoses.

 PRINCIPLE OF THE REGULEX® SYSTEM

The main function of the REGULEX® system is to control and regulate the dispensing of the

material bead.

As it is in relation with the robot and depending upon the flow information that is sent periodically

by the robot, it will act on the piston of the chamber to give in the shortest time possible the flow

asked by the robot.

SAMES KREMLIN Page 4 Manual : 573.005.212

 PRINCIPLE OF THE REGULEX® GUN

The gun consists of a chamber which contains the exact volume of material necessary to the

dispense of the bead. The chamber has two means of access :

 an inlet which allows material to enter,

 an outlet which allows the dispensing of material.

The piston movement is carried out by a servo-feed model "brushless", piloted by a digital servo

amplifier.

The REGULEX® proportioning gun has its own sensors (pressure and movement) so that the

REGULEX® Electronic Bay can regulate the volume of the dispensed material.

SAMES KREMLIN Page 5 Manual : 573.005.212

3. INSTALLATION

 PNEUMATIC CONNECTIONS

Install an HP hose between the fluid outlet of the filling pump and the fluid inlet of the mastic

regulator (if there is one) and and HP hose between the fluid outlet of the mastic regulator and the

fluid inlet of the proportioning gun. The hose can be an heating hose for easier fluid flow.

Install a plastic hose ( 4x6) to supply the gun valves. Connect the gun to the compressed air

network via a pressure reducing valve. Adjust the pressure to 6 bar / 87 psi.

Connect the filling pump air motor to the compressed air network via a pressure reducing valve.

Adjust the pressure between 2 and 5 bar / 29 and 72.5 psi (clean air).

 ELECTRIC CONNECTIONS

Connect the 3 electric cables between the REGULEX® bay and the proportioning gun (cables

fitted with connectors : HARTING 15 pins, JAEGER 6 pins, JAEGER 4 pins).

Connect the electric cable of the heating kit (if there is one) between the temperature regulation

box and the proportioning gun (cable fitted with 8 pins JAEGER connector).

Connect the interface electric cables between the REGULEX® bay and the robot control bay.

Connect the REGULEX® bay to the mains.

4. OPERATING

 BEFORE STARTING UP

The start-up is carried out from the REGULEX® control bay (or at any other control box which has

the same functions).

(refer to chapter «operating» of the control bay instruction manual).

Before starting up the REGULEX® :

- correct the offsets (see «Offset Page» - Bay instruction manual)

- check the values of the parameters and change them if necessary (see «Parameter page» - Bay

instruction manual)

The parameters are entered at the factory before the bay is released for delivery. For each

parameter, a value is given for the first operating.

Caution : Some parameters must correspond to the kind of REGULEX®

proportioning gun controlled by the bay.

The values of the other parameters must be modified to get an optimal operating of the

REGULEX® system.

Offset patching procedure

The bay must be "switched on", but not into service.

 The variable speed drive must not be supplied "with power".

 The REGULEX® proportioning machine must not be in pressure.

Display the "OFFSET" page on the screen of the bay to reach the parameters (refer to bay

instruction manual).

Pressure offset correction :

Select "sensor pressure Regulex A"  display : xx bar / xx psi

xx bar / xx psi is the pressure that the sensor measures. The value of that pressure must be

contained in - 4 bar / 59 psi and + 4 bar / 59 psi to make the validation possible (otherwise, fault of

the pressure sensor).

xx bar / xx psi +  key  pressure 0

SAMES KREMLIN Page 6 Manual : 573.005.212

Position offset correction :

Select "sensor position Regulex A"

 display : xx mm

By means of a screwdriver, lift up the end of

the potentiometer (13) that is on the

lubricator ring (28) and raise it to the top of

the light.

The value of that position must be

contained in 0 to + 4 mm to make the

validation possible (otherwise, fault of the

movement sensor).

xx mm +  key  position 0

Important :

Dimension of the position sensor with lock-

nut (sensor to stop) :

- Regulex® proportioning machine, type

compacted : D = 69,5 mm

- Regulex® proportioning machine, type

reinforced : D = 123 mm

Example above : proportioning machine,

version compacted 5cc

 PRIMING STAGE

When starting-up for the first time, ypu must prime the REGULEX® proportioning gun :

Come to move down the REGULEX® gun piston to low position.

Pressurize the filling pump.

WARNING : the fluid pressure at the inlet of the REGULEX® gun must

be lower or the same than the maximum pressure of the REGULEX®

(refer to REGULEX® features).

An overpressure must lead to a bad operating of the equipment.

Pressurize the filling and exhaust valves (maximum 6 bar / 87 psi).

 The filling and exhaust valves are open.

 The fluid is forced through the hoses then through the REGULEX® chamber.

 Let the fluid flow out from the outlet of the REGULEX®.

Close the REGULEX® valves.

End of the PRIMING operation, beginning of the WORKING operation.

The working operation consits of 3 functions : FILLING - REGULATION - EXTRUSION.

 FILLING STAGE

The exhaust valve is closed.

The filling valve is open.

The REGULEX® gun chamber is filled by servo-controlling the ascent of the piston to the pressure

of the chamber.

SAMES KREMLIN Page 7 Manual : 573.005.212

 REGULATION STAGE

The gun is filled.

The filling and exhaust valves are closed.

At the end of the filling operation, the piston is at its upper position. The system measures, controls

and regulates the informations : position of the piston, pressure inside the chamber, flow instruction.

 EXTRUSION STAGE

The gun is filled.

The filling valve is closed.

The robot controls the extrusion of the seal.

The exhaust valve opens.

The motor, via the ball screw, drives the piston. The material is exhausted to a constant flow (for a

constant instruction).

The REGULEX® piston comes down in the chamber  Dispensing of the bead.

If the REGULEX® gun is fitted with an heating kit :

Start up the control unit that controls the temperature.

Program the temperature regulators :

Instruction temperature.

Low alarm temperature.

High alarm temperature.

 Do not prime the REGULEX® gun as long as the fluid is not at the required temperature.

IMPORTANT

During the programming of the trajectory, begin the dispense of the bead where it

will have the most constant diameter.

At the end of the bead :

- Maintain a constant flow at the end of the trajectory,

- Program a null flow at the instant preceding the covering of the bead,

- Then program the closing of the exhaust valve.

WARNING

Before any action on the cables connected to the REGULEX® bay, you must

switch it off.

SAMES KREMLIN Page 8 Manual : 573.005.212

5. REGULEX® SHUTDOWN

Guards (air motor cover, coupling shields, housings …) have been designed for safe

use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

damage to property due to removal or partial removal of the guards.

 SHUTDOWN SUPERIOR TO 5 MINUTES

The REGULEX® proportioning gun must fall back.

A null flow must be programmed.

The nozzle must come stemming in a receptacle full of oil (or any other appropriate material) or

positioning itself in a tip.

 EXTENDED SHUTDOWN (EXAMPLE / NIGHT)

Carry out the previous stage.

Switch off the bay.

Shut off the compressed air on the filling shift.

Leave compressed air on the REGULEX® gun valves.

 STARTING UP

Put air on the filling shift.

Switch on the REGULEX® bay.

From the REGULEX® bay, drain the REGULEX® gun before continuing an automatic cycle.

6. MAINTENANCE

Guards (air motor cover, coupling shields, housings …) have been designed for safe

use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

damage to property due to removal or partial removal of the guards.

 WEEKLY CARE

Check the hoses.

Check that there is no leak from the fittings.

Drain the REGULEX® gun after an extended shutdown.

Clean the nozzle or change it (clogging or bead fault).

SAMES KREMLIN Page 9 Manual : 573.005.212

 MONTHLY CARE

Check the parameters of the REGULEX® bay (refer to bay instruction manual).

Check the wear of the friction ring at the lubrication level. Give the ring a quarter turn or change it

if necessary.

Lubricate the screw ball (every 300 hours).

(KLUBER grease - P.N°. NB 52)

(screw ball duration : 500 000 cycles)

 HALF-YEARLY CARE

Remove the gun fluid part :

- Clean the valves, the fluid chamber. Change the valves, if necessary.

- Change the seals and the defective parts.

- Check the piston condition.

Define the offsets on the REGULEX® bay (refer to § 5 and to bay instruction manual).

 YEARLY CARE

Check the electrovalves.

Check the screw ball.

Lubricate the outside and inside teeth of the reducer and of the bearings

(HARMONIC DRIVE grease - P.N°. SK1A)

7. TROUBLESHOOTINGS

If a problem occurs during the operating of the REGULEX®, the fault will be displayed on the display

unit (refer to bay instruction manual).

8. DISASSEMBLY- ASSEMBLY

Guards (air motor cover, coupling shields, housings …) have been designed for safe

use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

damage to property due to removal or partial removal of the guards.

Before removing the REGULEX® proportioning gun :

- Shut off the pump air supply (pump into service).

- Drain the REGULEX®.

- Open the pump drain cock.

- Shut off the REGULEX®.

- Disconnect all the electrical connection beads.

- Put aside the REGULEX® proportioning gun.

Pagina se încarcă...

Sames REGULEX 5 - 25 - 50CC Manual de utilizare

Marca: Sames

Model: REGULEX 5 - 25 - 50CC

Tip: Manual de utilizare

Descărcați PDF

raport

în alte limbi

English: Sames REGULEX 5 - 25 - 50CC User manual

Lucrări înrudite

Alte documente

Druck DPI 612 Manualul utilizatorului