Preparing for use
Inserting / replacing
batteries (s. Fig. C)
Note: Make sure you insert the batteries
with the correct polarity.
Operation
Weighing
Guide the strap
2
through the grip
of the article of luggage and hang
the hook
3
in the triangle
4
ring.
Before lifting the article of luggage,
press the ON / OFF / TARE switch
5
device is switched on. After switching
on, two signal tones are sounded.
Note: In the LC display
6
, the weight
“0.00 kg / 0.0 lb“ should appear. If it
does not, you can reset the display to
“0.00 kg / 0.0 lb” by pressing the
ON / OFF / TARE switch again.
Now slightly raise the scale with the
article of luggage. Make sure the
scale is horizontal and balanced. The
LC display now shows the weight of the
article of luggage; after 2–3 seconds
the display is frozen and displayed
for approx. 1 minute. During this time
the word HOLD (H)
9
appears in
the display. Then the device switches
off by itself.
Note: The heavier the article of lug-
gage, the longer the weighing process
lasts.