• On the main screen of the app, tap "+" or "Add device" (if there are no added
devices in the app). Select "Air purifier" in the window that opens.
Note: If the system prompts you to turn on any features on your smartphone,
follow the recommendations in the prompts.
• Enter your Wi-Fi network name and password if the fields have not been
filled in automatically. Tap "Next". Make sure that the EZ mode is selected in
the upper right corner.
• If the Wi-Fi icon on the device control panel is blinking, go to the next step
of the instructions. If the Wi-Fi icon is not blinking, press and hold the
"TIMER" button for about 7 seconds until it starts blinking.
• On the "Tips to Connect Devices" screen, check the "Make sure that the LED
indicator is blinking" box and tap "Next".
• Wait for the "Device successfully added" message to appear *.
Note: It is recommended to stay as close as possible to the device and, if
possible, to the router at the moment of connection to ensure a stable Wi-Fi
signal. After that, you will be able to control your device from the app. To learn
about remote control scenarios, see the full manual at aeno.com/documents.
ASBISc reserves the right to modify the device and to make edits and changes to this document
without prior notice to users.
The warranty period and service life shall be 2 years as from the date of purchase of the device.
Manufacturer: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101 Limassol, Cyprus. Made in
China. For current information and details on the device description and specification, as well as
connection process, certificates, warranty and quality issues, see relevant Installation and
Operation Manuals available for downloading at aeno.com/documents. All trademarks and names
herein are the property of their respective owners.
* In case of a connection failure, make sure that the device is connected to the power supply and
turned on, and the Wi-Fi icon on the device control panel is blinking. Press the "TIMER" button on
the control panel again until you hear a beep and the Wi-Fi icon starts blinking. Additionally, check
your router's Wi-Fi (aeno.com/router-help) settings or restart it, and then repeat the connection
process.