Eizo MX242W Manualul proprietarului

Marca: Eizo

Model: MX242W

Categorie: Televizoare

Tip: Manualul proprietarului

Instructions for Use

Color LCD monitor

English

Important

Please read this “Instructions for Use”, and “Installation Manual”

(separate volume) carefully to familiarize yourself with safe and

effective usage.

Please retain this manual for future reference.

• For monitor adjustment and settings, refer to the “Installation

Manual”.

• For the latest product information including the “Instructions for

Use”, refer to our web site :

http://www.eizoglobal.com

SAFETY SYMBOLS

This manual and this product use the safety symbols below. They denote critical information. Please read

them carefully.

WARNING

Failure to abide by the information in a

WARNING may result in serious injury

and can be life threatening.

CAUTION

Failure to abide by the information in a

CAUTION may result in moderate injury and/or

property or product damage.

Indicates a warning or caution. For example, indicates an “electrical shock” hazard.

Indicates a prohibited action. For example, means “Do not disassemble”.

Indicates a mandatory action. For example, means “Ground the unit”.

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

PRECAUTIONS

English

PRECAUTIONS

IMPORTANT

• This product has been adjusted specically for use in the region to which it was originally shipped.

If the product is used outside the region, it may not operate as specied in the specications.

• To personal safety and proper maintenance, please read carefully this section and the caution

statements on the monitor.

Location of the Caution Statements

AVERTISSEMENT

WARNING

WARNUNG

Symbols on the unit

Symbol This symbol indicates

Main Power Switch: Press to turn the monitor’s main power off.

Main Power Switch: Press to turn the monitor’s main power on.

Power button: Press to turn the monitor’s power on or off.

Alternating current

Alerting electrical hazard

CAUTION: Refer to “SAFETY SYMBOLS” (page 2).

WEEE marking:

Product must be disposed of separately; materials may

be recycled.

CE marking:

EU conformity mark in accordance with the provisions of

Council Directive and/or Regulation (EU).

Manufacturer

Date of manufacture

PRECAUTIONS

WARNING

If the unit begins to emit smoke, smells like something is burning, or makes strange noises, discon-

nect all power connections immediately and contact your EIZO representative for advice.

Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.

Do not open the cabinet or modify the unit.

Opening the cabinet or modifying the unit may result in re, electric shock, or burn.

Refer all servicing to qualied service personnel.

Do not attempt to service this product yourself as opening or removing covers may result in re, electric

shock, or equipment damage.

Keep small objects or liquids away from the unit.

Small objects accidentally falling through the ventilation slots into the cabinet or spillage

into the cabinet may result in re, electric shock, or equipment damage. If an object or

liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by

a qualied service engineer before using it again.

Place the unit at a sturdy and stable place.

A unit placed on an inadequate surface may fall and result in injury or equipment

damage. If the unit falls, disconnect the power immediately and ask your local EIZO

representative for advice. Do not continue using a damaged unit. Using a damaged unit

may result in re or electric shock.

Use the unit in an appropriate location.

Otherwise, re, electric shock, or equipment damage may result.

• Do not place outdoors.

• Do not place in any form of transportation (ships, aircraft, trains, automobiles, etc.).

• Do not place in dusty or humid environments.

• Do not place in locations where water may be splashed on the screen (bathrooms, kitchens,

etc.)

• Do not place in locations where steam comes in direct contact with the screen.

• Do not place near heat generating devices or humidiers.

• Do not place in locations where the product is subject to direct sunlight.

• Do not place in environments with inammable gas.

• Do not place in environments with corrosive gases (such as sulfur dioxide, hydrogen sulde,

nitrogen dioxide, chlorine, ammonia, and ozone).

• Do not place in environments with dust, components that accelerate corrosion in the

atmosphere (such as sodium chloride and sulfur), conductive metals, and so on.

To avoid danger of suffocation, keep the plastic packing bags away from babies and children.

Use the enclosed power cord and connect to the standard power outlet in your country.

Be sure to use within the rated voltage of the power cord. Otherwise, re or electric shock may result.

Power supply: 100-240Vac 50/60Hz

To disconnect the power cord, grasp the plug rmly and pull.

Tugging on the cord may damage and result in re or electric shock.

The equipment must be connected to a grounded main outlet.

Failure to do so may result in re or electric shock.

PRECAUTIONS

English

WARNING

Use the correct voltage.

• The unit is designed for use with a specic voltage only. Connection to another voltage than specied in this

“Instructions for Use” may cause re, electric shock, or equipment damage.

Power supply: 100-240Vac 50/60Hz

• Do not overload your power circuit, as this may result in re or electric shock.

Handle the power cord with care.

• Do not place the cord underneath the unit or other heavy objects.

• Do not pull on or tie the cord.

If the power cord becomes damaged, stop using it. Using of a damaged cord may result

in re or electric shock.

For electrical safety, do not connect or disconnect the power cord in the presence of patients.

Never touch the plug and power cord if it begins to thunder.

Touching them may result in electric shock.

When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit

securely.

Otherwise, the unit may become detached, resulting in injury and/or equipment damage. Before installation,

make sure that desks, walls, or any other installation surface has adequate mechanical strength. If the unit

falls, please ask your local EIZO representative for advice. Do not continue using a damaged unit. Using

a damaged unit may result in re or electric shock. When reattaching the tilt stand, please use the same

screws and tighten them securely.

Do not touch a damaged LCD panel directly with bare hands.

Liquid crystal is poisonous. If any part of your skin comes in direct contact with the

panel, wash thoroughly. If liquid crystal enters your eyes or mouth, immediately ush

with large amounts of water and seek medical attention.

Fluorescent backlight lamps contain mercury (the products that have LED backlight lamps contain

no mercury), dispose according to local, state or federal laws.

Exposure to elemental mercury can result in effects on the nervous system, including tremors, memory loss,

and headaches.

PRECAUTIONS

CAUTION

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit. Moving the unit with the power cord or cables

attached is dangerous and may result in injury.

Carry or place the unit according to the correct specied methods.

• When carrying, grasp and rmly hold the unit as shown in the illustration below.

• Large-size units are heavy. Unpack or carry the unit with at least two people.

Dropping the unit may result in injury or equipment damage.

Do not block the ventilation slots on the cabinet.

• Do not place any objects on the ventilation slots.

• Do not install the unit in a place with poor ventilation or inadequate space.

• Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper airow and may result in re, electric

shock, or equipment damage.

Do not touch the plug with wet hands.

Doing so may result in electrical shock.

Use an easily accessible power outlet.

This is to facilitate disconnecting the power in case of a problem.

Periodically clean the area around the power plug and the ventilation slot of the monitor.

Dust, water, or oil on the plug may result in re.

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in electric shock.

If you plan to leave the unit unused for an extended period of time, disconnect the power cord from

the wall socket after turning off the power switch for the safety and the power conservation.

This product is suitable for placing near patients, but not for direct contact with patients.

For users in the territory of the EEA and Switzerland:

Any serious incident that has occurred in relation to the device should be reported to the

Manufacturer and the Competent Authority of the Member State in which the user and/or patient is

established.

Notice for this monitor

English

Notice for this monitor

Intended use

This product is intended to be used in displaying and viewing digital images for review and analysis

by trained medical practitioners. It does not support the display of mammography images for

diagnosis.

Caution: Federal law (USA) restricts this device to sale by or on the order of a physician.

Attention

• This product may not be covered by warranty for uses other than those described in this manual.

• The specications noted in this manual are only applicable when the following are used:

- Power cords provided with the product

- Signal cables specied by us

• Only use optional products manufactured or specied by us with this product.

Installation Requirements

• Carefully read the “PRECAUTIONS” (page 3) and always follow the instructions.

• When installing the monitor in a rack, ensure that there is adequate space around the sides, back

and top of the monitor.

• Position the monitor so that there is no light to interfere with the screen.

• If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand

due to the composition of the rubber.

Maintenance

• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes

or more after the monitor power has been turned on or the monitor has recovered from the power

saving mode, and then adjust the monitor.

• Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term

use and maintain a stable display. Periodically perform constancy tests. Calibrate if necessary. For

details, refer to the User Manuals for the RadiCS/RadiCS LE monitor quality control software.

• Otherwise, parts (such as the LCD panel or the fan) may deteriorate in the long-term. Periodically

check that they are operating normally.

• When the screen image is changed after displaying the same image for extended periods of time,

an afterimage may appear. Use the screen saver or power save function to avoid displaying the

same image for extended periods of time.

• If the monitor displays continuously over a long period of time, dark smudges or burn-in may

appear. To maximize the life of the monitor, we recommend the monitor be turned off periodically.

• The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to

icker, please contact your local EIZO representative.

• The screen may have defective pixels or a small number of light dots on the screen. This is due to

the characteristics of the panel itself, and is not a malfunction of the product.

Notice for this monitor

• Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions,

such as interference patterns, etc. If pressure is continually applied to the panel, it may deteriorate

or damage your panel. (If the pressure marks remain on the panel, leave the monitor with a black or

white screen. The symptom may disappear.)

• Do not scratch or press on the panel with any sharp objects, as this may result in damage to the

panel. Do not attempt to brush with tissues as this may scratch the panel.

• When the monitor is cold and brought into a room or the room temperature goes up quickly, dew

condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not

turn the monitor on. Instead wait until the dew condensation disappears, otherwise it may cause

some damage to the monitor.

Cleaning

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation

lifetime.

Attention

• Do not use chemicals on a frequent basis. Chemicals such as alcohol and antiseptic solution may cause

gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image.

• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.

• Do not let chemicals come into direct contact with the monitor.

Note

• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.

Gently wipe off any dirt on the cabinet or panel surface with a soft cloth soaked in a small amount of

water or one of the chemicals listed below.

Chemicals that may be used for cleaning

Material name Product name

Ethanol Ethanol

Isopropyl alcohol Isopropyl alcohol

Chlorhexidine Hibitane

Sodium hypochlorite Purelox

Benzalkonium chloride Welpas

Alkyldiaminoethylglycine Tego 51

Glutaral Sterihyde

Glutaral Cidex Plus28

To use the monitor comfortably

• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor

according to the environmental conditions.

• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

• Look at the screen from a proper distance and from a proper angle.

CONTENTS

English

CONTENTS

PRECAUTIONS ...................................................... 3

IMPORTANT .............................................................. 3

Notice for this monitor ......................................... 7

CONTENTS ............................................................. 9

Chapter 1 Introduction ..................................... 10

1-1. Features ........................................................10

1-2. Package Contents ........................................10

1-3. EIZO LCD Utility Disk...................................11

●

Disk contents and software overview ............11

●

Using RadiCS LE/ScreenManager Pro for

Medical ........................................................... 11

1-4. Controls and Functions ..............................12

Chapter 2 Setting Up ........................................ 13

2-1. Compatible Resolutions .............................13

2-2. Connecting Cables ......................................13

2-3. Adjusting the Screen Height and Angle .... 14

Chapter 3 Troubleshooting .............................. 15

Chapter 4 Specications ................................. 16

Chapter 5 Glossary .......................................... 18

Appendix .............................................................. 20

Trademark ............................................................... 20

License / Copyright .................................................21

Medical Standard ....................................................21

EMC Information .................................................... 22

FCC Declaration of Conformity ............................ 27

Declaration of compliance with India RoHS ....... 28

Recycling Information/

Informationen zum Thema Recycling/

Informations sur le recyclage/

Сведения по утилизации .................................... i

Chapter 1 Introduction

Thank you very much for choosing an EIZO color LCD color.

1-1. Features

• 24.0″ wide format LCD

• Wide-gamut panel

• Supports a resolution of 2.3 M pixels (1920 dots × 1200 lines)

• IPS panel with 178˚ horizontal and vertical viewing angles

• Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)

• The CAL Switch function allows the user to select the display mode optimum to the displayed

image.

Refer to the Installation Manual (on the CD-ROM).

• Selectable DICOM (page 18) Part 14 complied screen.

• The quality control software “RadiCS LE” used to calibrate the monitor and to manage the history is

included.

See “1-3. EIZO LCD Utility Disk” (page 11).

• The software “ScreenManager Pro for Medical” to adjust the screen using the mouse and keyboard

is included

See “1-3. EIZO LCD Utility Disk” (page 11).

• Power saving function

This product is equipped with power saving function.

- 0 W power consumption when the main power is off

Equipped with main power switch. When the monitor is not required, the power supply can be shut off

using the main power switch

• Stand with wide range of movement

The monitor can be adjusted to a position where it provides you with a comfortable and less tiring work

environment.

(Tilt: up 35˚/down 5˚, Swivel: 344˚, Adjustable height: 110 mm (Tilt: 35°), 130 mm (Tilt: 0°))

• Long service life LED backlight LCD panel

1-2. Package Contents

Check that all the following items are included in the packaging box. If any items are missing or damaged,

contact your local EIZO representative.

Note

• Please keep the packaging box and materials for future movement or transport of the monitor.

• Monitor

• Power cord

• Digital signal cable:

DisplayPort - DisplayPort (PP300)

• Digital signal cable: DVI-D - DVI-D (DD300)

• USB cable: UU300

• Stand base

• Cable holder

• EIZO LCD Utility Disk (CD-ROM)

• Instructions for Use

• Assembling the Stand

Chapter 1 Introduction

English

1-3. EIZO LCD Utility Disk

An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk

contents and the overview of the software programs.

●

Disk contents and software overview

The disk includes application software programs for adjustment, and Installation Manual. Refer to

Readme.txt le on the disk for software startup procedures or le access procedures.

Contents Overview

Readme.txt le

RadiCS LE (for Windows) Quality control software for calibrating the monitor and managing the

calibration history.

ScreenManager Pro for Medical (for

Windows)

Software for adjusting the screen using the mouse and keyboard.

Installation Manual of this monitor (PDF le)

“Instructions for Use” of this monitor (PDF le)

●

Using RadiCS LE/ScreenManager Pro for Medical

For the installation and use of “RadiCS LE/ScreenManager Pro for Medical”, refer to the respective

User’s Manual on the disk.

When using this software, you will need to connect a PC to the monitor with the supplied USB cable.

For more information, refer to the Installation Manual (on the CD-ROM).

Chapter 1 Introduction

1-4. Controls and Functions

72 31

8 9 10 11 12

Adjustment menu*

1. button Switches input signals for display.

button Switches the CAL Switch mode.

button Cancels the setting/adjustment and exits the Adjustment menu.

button Provides the menu selection as well as the adjustment and setting of a function.

button

Displays the Adjustment menu, determines an item on the menu screen, and saves

values adjusted.

button Turns the power on or off.

7. Power Indicator

Indicates the monitor’s operation status.

Green: Operating

Orange: Power saving mode

OFF: Main power/Power off

8. Main power switch Turns the main power on or off.

9. Power connector Connects the power cord.

10. Input signal connectors Left: DVI-I connector / Right: DisplayPort connector

11. USB upstream port

Connects the USB cable to use the software that needs USB connection, or to use

USB hub function.

12. USB downstream port Connects a peripheral USB device.

13. Stand Used to adjust the height and angle of the monitor screen.

14. Security lock slot Complies with Kensington’s MicroSaver security system.

15. Cable holder Covers the monitor cables.

*1 For instructions for use, refer to the Installation Manual (on the CD-ROM).

Chapter 2 Setting Up

English

Chapter 2 Setting Up

2-1. Compatible Resolutions

The monitor supports the following resolutions.

Resolution vertical scan frequency

640 × 480 60 Hz

720 × 400 70 Hz

800 × 600 60 Hz

1024 × 768 60 Hz

1280 × 960 60 Hz

1280 × 1024 60 Hz

1600 × 1200 60 Hz

1680 × 1050 60 Hz

1920 × 1200

60 Hz

*1 Recommended resolution.

2-2. Connecting Cables

Attention

• Check that the monitor and the PC are powered off.

• When replacing the current monitor with this monitor, be sure to change the PC settings for resolution and

vertical scan frequency to those that are available for this monitor. Refer to the compatible resolution table before

connecting the PC.

Note

• When connecting multiple PCs to this product, refer to the Installation Manual (on the CD-ROM).

Connect the signal cables to the input signal connectors and PC.

Check the shape of the connectors, and connect the cables.

After connecting the signal cable, tighten the screws of the connectors to secure the coupling.

Digital connection (DisplayPort)

Digital connection (DVI)

Signal cable: DisplayPort - DisplayPort (supplied)

Signal cable: DVI-D - DVI-D (supplied)

Plug the power cord into a power outlet and the power connector on the

monitor.

Chapter 2 Setting Up

Connect the USB cable when using RadiCS LE or ScreenManager Pro for

Medical.

Connecting to the Monitor Connecting to a Computer

A cable holder is supplied with this product. Use the holder to organize the

cables connected to the monitor.

Press to turn on the monitor.

The monitor’s power indicator lights up green.

Turn on the PC.

The screen image appears.

If an image does not appear, refer to “Chapter 3 Troubleshooting” (page 15) for additional advice.

Attention

• Turn off the monitor and PC after using them.

• For the maximum power saving, it is recommended that the Power button be turned off. Turning off the main

power switch or unplugging the power cord completely shuts off power supply to the monitor.

Note

• In order to maximize the monitor life and to minimize luminance deterioration as well as power consumption,

proceed the following:

- Use the power saving function of the computer.

- Turn off the monitor and PC after using them.

2-3. Adjusting the Screen Height and Angle

Hold left and right edge of the monitor with both hands, and adjust the screen height, tilt and swivel of the

screen to the best condition for working.

Attention

• Be sure that the cables are correctly connected.

Chapter 3 Troubleshooting

English

Chapter 3 Troubleshooting

If a problem still remains after applying the suggested remedies, contact your local EIZO representative.

Problem Possible cause and remedy

1. No picture

• Power indicator does not light.

• Check whether the power cord is connected properly.

• Turn the main power switch on.

• Press

• Turn off the main power, and then turn it on again a few

minutes later.

• Power indicator is lighting green. • Increase “Brightness”, “Gain” in the Adjustment menu.

• Power indicator is lighting orange.

• Switch the input signal with

• Move the mouse or press any key on the keyboard.

• Check whether the PC is turned on.

• Power indicator is ashing orange and green. • The device that is connected using DisplayPort have a

problem. Solve the problem, turn off the monitor, and then

turn it on again. Refer to the User’s Manual of the output

device for further details.

2. The message below appears. This message appears when the signal is not input correctly

even when the monitor functions properly.

• This message appears when no signal is

input.

Example:

• The message shown left may appear, because some PCs

do not output the signal soon after power-on.

• Check whether the PC is turned on.

• Check whether the signal cable is connected properly.

• Switch the input signal with

• The message shows that the input signal is

out of the specied frequency range. (Such

signal frequency is displayed in magenta.)

Example:

fD: Dot clock (Displayed only during digital

signal input)

fH: Horizontal scan frequency

fV: Vertical scan frequency

• Check whether the PC is congured to meet the resolution

and vertical scan frequency requirements of the monitor

(see “2-1. Compatible Resolutions” (page 13)).

• Reboot the PC.

• Select an appropriate setting using the graphics board’s

utility. Refer to the manual of the graphics board for

details.

Chapter 4 Specications

LCD Panel Type IPS (Anti-Glare)

Backlight LED

Size 61 cm (24.1 inch) (61.1 cm diagonal)

Native Resolution 2.3M pixels (1920 dots × 1200 lines)

Display Size (H x V) 518.4 mm × 324.0 mm

Pixel Pitch 0.27 mm

Display Colors 10-bit colors: 1.07 billion (maximum) colors

Viewing Angles

(H / V, typical)

178˚ / 178˚

Recommended

Brightness

180 cd/m

Contrast ratio (typical) 1000:1

Response Time

(typical)

12 ms (Black-white-black)

Video Signals Input Terminals DVI-I × 1, DisplayPort × 1

Digital Scanning

Frequency (H / V)

31 kHz - 76 kHz / 59 Hz - 61 Hz (VGA TEXT: 69 Hz - 71 Hz)

Frame synchronous mode: 59 Hz - 61 Hz

Analog Scanning

Frequency (H / V)

26 kHz - 76 kHz / 49 Hz - 71 Hz (VGA TEXT: 69 Hz - 71 Hz)

Synchronous signal Separate, TTL, positive/negative

Dot clock 165 MHz (maximum)

USB

Port

Upstream port × 1, Downstream port × 2

Standard

USB Specication Revision 2.0

Power

Input

100 - 240 V ac ±10%, 50/60 Hz 0.70 A - 0.40 A

Maximum Power

Consumption

68 W or less

Power Save Mode

0.5 W or less (when only the DVI (analog) connector is connected, “Input

Selection” is set to “Manual”, no USB device is connected, and “DP

PowerSave” is set to “On”)

Standby Mode

0.5 W or less (when no USB device is connected, and “DP PowerSave”

is set to “On”)

Physical

Specications

Dimensions

575 mm × 409 - 553.7 mm × 245 mm ( W × H × D ) (Tilt: 0˚)

Dimensions

(Without Stand)

575 mm × 398 mm × 71 mm ( W × H × D )

Net Weight

Approx. 8.7 kg

Net Weight

(Without Stand)

Approx. 6.0 kg

Height Adjustment

Range

138.6 mm (Tilt: 35˚)

144.7 mm (Tilt: 0˚)

Tilt

Up 35˚, down 5˚

Swivel

344˚

Pivot

90˚ (clockwise)

Operating

Environmental

Requirements

Temperature: 0˚C to 35˚C (32˚F to 95˚F)

Humidity 20% to 80% R.H. (no condensation)

Air pressure 540 hPa to 1060 hPa

Transportation/

Storage

Environmental

Requirements

Temperature -20˚C to 60˚C (-4˚F to 140˚F)

Humidity 10% to 90% R.H. (no condensation)

Air pressure 200 hPa to 1060 hPa

Chapter 4 Specications

English

Outside Dimensions

Unit: mm

344

575

518.4

398

324

(28.3)(28.3)

（28.3）

(45.7)

(553.7)

(651)

245

363

(427)

(409)

371

100

(237.5) (237.5)

100

(157.7) (140.3)

Accessories

Calibration Kit EIZO “RadiCS UX1” Ver. 4.3.2 or later

EIZO “RadiCS Version Up Kit” Ver. 4.3.2 or later

Network QC Management Software EIZO “RadiNET Pro” Ver. 4.3.2 or later

Cleaning Kit EIZO “ScreenCleaner”

Signal Cable (DVI-I - D-Sub) FD-C16

For the latest information about the accessories and information about the latest compatible graphics

board, refer to our web site.

http://www.eizoglobal.com

Chapter 5 Glossary

Clock

The analog signal input monitor needs to reproduce a clock of the same frequency as the dot clock

of the graphics system in use, when the analog signal is converted to a digital signal for image

display. This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars

appear on the screen.

DDC (Display Data Channel)

VESA provides the standardization for the interactive communication of the setting information, etc.

between a PC and the monitor.

DisplayPort

This is the interface standard for image signals standardized in accordance with VESA. It was

developed with the aim of replacing the conventional DVI and analog interfaces, and it can transmit

high resolution signals and sound signals, which DVI does not support. The standard size and mini

size connectors have been standardized.

DICOM (Digital Imaging and Communication in Medicine)

The DICOM standard was developed by the American College of Radiology and the National

Electrical Manufacturer’s Association of the USA.

The DICOM compatible device connection enables to transfer the medical image and information.

The DICOM, Part 14 document denes the digital, grayscale medical image display.

DVI (Digital Visual Interface)

DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without

loss.

This adopts the TMDS transmission system and DVI connectors. There are two types of DVI

connectors. One is a DVI-D connector for digital signal input only. The other is a DVI-I connector

for both digital and analog signal inputs.

DVI DMPM (DVI Digital Monitor Power Management)

DVI DMPM is a digital interface power saving function. The “Monitor ON (operating mode)” and

“Active Off (power saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.

Gain

This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the

color by the light passing through the panel color lter. Red, green and blue are the three primary

colors. All the colors on the screen are displayed by combining these three colors. The color tone

can be changed by adjusting the light intensity (volume) passing through each color’s lter.

Gamma

Generally, the monitor brightness varies nonlinearly with the input signal level, which is called

“Gamma Characteristic”. A small gamma value produces a low-contrast image, while a large

gamma value produces a highcontrast image.

Chapter 5 Glossary

English

HDCP (High-bandwidth Digital Content Protection)

Digital signal coding system developed to copy-protect the digital contents, such as video, music,

etc.

This helps to transmit the digital contents safely by coding the digital contents sent via the DVI or

HDMI connector on the output side and decoding them on the input side.

Any digital contents cannot be reproduced if both of the equipments on the output and input sides

are not applicable to HDCP system.

Phase

Phase means the sampling timing to convert the analog input signal to a digital signal. Phase

adjustment is made to adjust the timing. It is recommended that phase adjustment be made after

the clock is adjusted correctly.

Range Adjustment

Range adjustment controls the signal output levels to display every color gradation. It is

recommended that range adjustment be made before color adjustment.

Resolution

The LCD panel consists of numerous pixels of specied size, which are illuminated to form images.

This monitor consists of horizontal 1920 pixels and 1200 vertical pixels. At a resolution of 1920 ×

1200, all pixels are illuminated as a full screen (1:1).

Temperature

Color temperature is a method to measure the white color tone, generally indicated in degrees

Kelvin. The screen becomes reddish at a low temperature, and bluish at a high temperature, like

the ame temperature.

5000 K: Slightly reddish white

6500 K: White referred to as daylight-balanced color

9300 K: Slightly bluish white

VESA DPM (Video Electronics Standards Association - Display Power

Management)

VESA specications achieve increased energy efciency for computer monitors. This involves

standardization of signals sent from the computer (graphics board).

DPM denes the status of signals transmitted between the computer and monitor.

Appendix

Trademark

The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing, LLC in the United States and other countries.

The DisplayPort Compliance Logo and VESA are registered trademarks of the Video Electronics

Standards Association.

Acrobat, Adobe, Adobe AIR, and Photoshop are registered trademarks of Adobe Systems Incorporated

in the United States and other countries.

AMD Athlon and AMD Opteron are trademarks of Advanced Micro Devices, Inc.

Apple, ColorSync, eMac, iBook, iMac, iPad, Mac, MacBook, Macintosh, Mac OS, PowerBook, and

QuickTime are registered trademarks of Apple Inc.

ColorMunki, Eye-One, and X-Rite are registered trademarks or trademarks of X-Rite Incorporated in the

United States and/or other countries.

ColorVision and ColorVision Spyder2 are registered trademarks of DataColor Holding AG in the United

States.

Spyder3 and Spyder4 are trademarks of DataColor Holding AG.

ENERGY STAR is a registered trademark of the United States Environmental Protection Agency in the

United States and other countries.

GRACoL and IDEAlliance are registered trademarks of International Digital Enterprise Alliance.

NEC is a registered trademark of NEC Corporation.

PC-9801 and PC-9821 are trademarks of NEC Corporation.

NextWindow is a trademark of NextWindow Ltd.

Intel, Intel Core, Pentium, and Thunderbolt are trademarks of Intel Corporation in the U.S. and/or other

countries.

PowerPC is a registered trademark of International Business Machines Corporation.

PlayStation is a registered trademark of Sony Computer Entertainment Inc.

PSP and PS3 are trademarks of Sony Computer Entertainment Inc.

RealPlayer is a registered trademark of RealNetworks, Inc.

TouchWare is a trademark of 3M Touch Systems, Inc.

Windows, Windows Media, Windows Vista, SQL Server, Xbox 360, and Internet Explorer are registered

trademarks of Microsoft Corporation in the United States and other countries.

YouTube is a registered trademark of Google Inc.

Firefox is a registered trademark of the Mozilla Foundation.

Kensington and MicroSaver are registered trademarks of ACCO Brands Corporation.

EIZO, the EIZO Logo, ColorEdge, DuraVision, FlexScan, FORIS, RadiCS, RadiForce, RadiNET, Raptor,

and ScreenManager are registered trademarks of EIZO Corporation in Japan and other countries.

ColorNavigator, EcoView NET, EIZO EasyPIX, EIZO ScreenSlicer, i • Sound, Screen Administrator,

UniColor , and Re/Vue are trademarks of EIZO Corporation.

All other company and product names are trademarks or registered trademarks of their respective

owners.

Pagina se încarcă...

Eizo MX242W Manualul proprietarului

Marca: Eizo

Model: MX242W

Categorie: Televizoare

Tip: Manualul proprietarului

Descărcați PDF

raport

în alte limbi

English: Eizo MX242W Owner's manual

Eizo MX242W Manualul proprietarului

Eizo MX242W Manualul proprietarului

în alte limbi

Lucrări înrudite

Alte documente