Sames 34F60 Manual de utilizare

Sames
Marca
Sames
Model
34F60
Categorie
Pulverizator de vopsea
Tip
Manual de utilizare
DOCUMENTATION
PUMP 34F60
Manual : 582.018.110-UK - 2204
Date: 11/04/22
Supersede : 11/02/19
Modif.: Update
TRANSLATION FROM THE ORIGINAL MANUAL
IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents relating
to this equipment (professional use only).
THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.
SAMES KREMLIN SAS
l
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
578.026.130 1901
SAMES KREMLIN SAS
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
FR
UK
DE
Pour une utilisation sure, Il est de votre responsabilité
de :
• Lire attentivement tous les documents contenus
dans le CD joint avant la mise en service de
l’équipement,
•
D’installer, d’utiliser, d’entretenir et de réparer
l’équipement conformément aux préconisations de
SAMES KREMLIN ainsi qu’aux réglementations
nationales et/ou locales,
• Vous assurez que les utilisateurs de cet équipement
ont été formés, ont parfaitement compris les règles de
sécurité et qu’ils les appliquent.
To ensure safe use of the machinery, it is your
responsibility to:
•
Carefully read all documents contained on the
enclosed CD before putting the machinery into service,
• Install, use, maintain and repair the machinery in
accordance with SAMES KREMLIN's recommendations
and national and/or local regulations,
• Make sure that the users of the machinery have
received proper training and that they have perfectly
understood the safety rules and apply them.
Eine sichere Nutzung setzt voraus, dass Sie: :
•
alle in der CD enthaltenen Dokumente vor der
Inbetriebnahme der Anlage aufmerksam lesen,
• die Anlage im Einklang mit den Empfehlungen von
SAMES KREMLIN sowie mit den nationalen und/oder
lokalen Bestimmungen installieren, verwenden,
warten und reparieren,
• sich vergewissern, dass die Nutzer dieser Anlage
angemessen geschult wurden, die
Sicherheitsbestimmungen verstanden haben und sie
anwenden.
ES
IT
PT
Para una utilización segura, será de su
responsabilidad:
•
leer atentamente todos los documentos que se
incluyen en el CD adjunto antes de la puesta en servicio
del equipo,
• instalar, utilizar, efectuar el mantenimiento y reparar
el equipo con arreglo a las r
ecomendaciones de
SAMES KREMLIN y a la normativa nacional y/o local,
• cerciorarse de que los usuarios de este equipo han
recibido la formación necesaria, han entendido
perfectamente las normas de seguridad y las aplican.
Per un uso sicuro, vi invitiamo a:
• l
eggere attentamente tutta la documentazione
contenuta nel CD allegato prima della messa in
funzione dell'apparecchio,
•
installare, utilizzare, mantenere e riparare
l'apparecchio rispettando le raccomandazioni di SAMES
KREMLIN, nonché le normative nazionali e/o locali,
•
accertarvi che gli utilizzatori dell'apparecchio
abbiano ricevuto adeguata formazione, abbiano
perfettamente compreso le regole di sicurezza e le
applichino.
Para uma utilização segura, é da sua
responsabilidade:
• Ler atentamente todos os documentos incluídos no
CD em anexo antes de pör o equipamento em
funcionamento,
• Proceder à instalação, utilização, manutenção e
reparação do equipamento de acordo com as
preconizações de SAMES KREMLIN, bem como com
outros regulamentos nacionais e/ou locais aplicáveis,
• Assegurar-se que os utilizadores do equipamento
foram devidamente capacitados, compreenderam
perfeitamente e aplicam as devidas regras de
segurança.
NL
SE
FI
Voor een veilig gebruik dient u:
• alle document op de bijgevoegde cd aandachtig te
lezen alvorens het apparaat in werking te stellen,
• het apparaat te installeren, gebruiken, onderhouden
en repareren volgens de door SAMES KREMLIN
gegeven aanbevelingen en overeenkomstig de
nationale en/of plaatselijke reglementeringen,
• zeker te stellen dat de gebruikers van dit apparaat
zijn opgeleid, de veiligheidsregels perfect hebben
begrepen en dat zij die ook toepassen.
För en säker användning av utrustningen ansvarar ni
för följande:
• Läs noga samtliga dokument som finns på den
medföljande cd-skivan innan utrustningen tas i drift.
•
Installera, använd, underhåll och reparera
utrustningen enligt anvisningarna från SAMES
KREMLIN och enligt nationella och/eller lokala
bestämmelser.
• Försäkra er om att användare av denna utrustning
erhållit utbildning, till fullo förstått säkerhetsföreskrifterna
och tillämpar dem.
Käytön turvallisuuden varmistamiseksi
velvollisuutesi on:
• Lukea huolella kaikki CD:llä olevat asiakirjat ennen
laitteiston käyttöönottoa,
•
Noudattaa laitteiston asennuksessa, käytössä,
kunnossapidossa ja hu
ollossa SAMES KREMLIN in
suosituksia sekä kansallisia ja/tai paikallisia
määräyksiä,
• Varmistaa, että laitteiston käyttäjät ovat koulutettuja
ja ymmärtävät täysin turvallisuusmääräykset ja miten
niitä sovelletaan.
PL
CS
SL
Dla zapewnienia bezpiecznego użytkowania na
użytkowniku spoczywa obowiązek:
• Uważnego zapoznania się ze wszystkimi
dokumentami znajdującymi się na załączonej płycie CD
przed pierwszym uruchomieniem urządzenia,
• Instalowania, użytkowania, konserwacji i naprawy
urządzenia zgodnie z zaleceni
ami firmy SAMES
KREMLIN oraz z przepisami miejscowymi,
• Upewnienia, że wszyscy przeszkoleni użytkownicy
urządzenia zrozumieli zasady bezpieczeństwa i stosują
się do nich.
Pro bezpečné používání jste povinni:
• Před uvedením zařízení do provozu si pozorně
přečíst veškeré dokumenty obsažené na přiloženém
CD,
• Nainstalovat, používat, udržovat a opravovat
zařízení v souladu s pokyny firmy SAMES KREMLIN
a s národními a/nebo místními legislativními předpisy,
• Ujistit se, že uživatelé tohoto zařízení byli vyškoleni,
že dokonale pochopili bezpečnostní pravidla a že je
dodržují.
Za varno uporabo ste dolžni:
• natančno prebrati vse dokumente na CD pred
zagonom stroja,
•
inštalirati, uporabljati, vzdrževati in popravljati
opremo po določilih SAMES KREMLIN in v skladu z
veljavnimi nacionalnimi in/ali lokalnimi predpisi,
•
poskrbeti, da so uporabniki te opreme ustrezno
usposobljeni, poznajo varnostne predpise in da jih
upoštevajo.
SK
HU
RO
V záujme bezpečného je vašou povinnosťou:
• pozorne si prečítať všetky dokumenty obsiahnuté na
priloženom CD predtým, ako zariadenie uvediete do
prevádzky,
• nainštalovať, používať, udržiavať a opravovať
zariadenie v súlade s odporúčaniami spoločnosti
SAMES KREMLIN a národnými a/alebo miestnymi
predpismi,
• uistiť sa, že používatelia tohto zariadenia boli
zaškolení, riadne porozumeli pravidlám bezpečnosti a
používajú ich.
A biztonságos használat érdekében az Ön
felelőssége, hogy:
• a berendezés üzembe helyezése előtt figyelmesen
elolvassa a mellékelt CD által tartalmazott összes
dokumentumot,
• a berendezést a SAMES KREMLIN ajánlasainak
valamint a nemzeti és/vagy helyi szabályozásoknak
megfelelően helyezze üzembe, használja, tartsa karban
és javítsa,
•
megbizonyosodjon róla, hogy a berendezés
felhasználói képzettek, tökéletesen megértették és
alkalmazzák a biztonsági előírásokat.
Pentru o utilizare sigură, este responsabilitatea dvs.
să:
• Citiţi cu atenţie toate documentele de pe CD-ul
anexat, înainte de punerea în funcţiune a
echipamentului,
• Instalaţi, utilizaţi, întreţineţi şi reparaţi echipamentul
conform instrucţiunilor SAMES KREMLIN precum şi
reglementărilor naţionale şi/sau locale,
• Vă asiguraţi că utilizatorii acestui echipament au
fost instruiţi, au înţeles perfect regulile de securitate şi
le aplică integral.
Déclaration(s) de conformité au verso de ce document / Declaration(s) of conformity at the back of this document / Konformitätserklärung(en) auf der Rückseite dieser Unterlage
/ Declaración (es) de conformidad en el reverso de este documento / Dichiarazione/i di conformità sul retro del presente documento
/ Declaração(ções) de conformidade no verso do documento / Conformiteitsverklaring(en) op de keerzijde van dit document / Försäkran om överensstämmelse på omstående sida
av detta dokument / Vaatimustenmukaisuusvakuutukset tämän asiakirjan kääntöpuolella / Deklaracja(e) zgodności na odwrocie dokumentu
/ Prohlášení o shodě se nachází/nacházejí na zadní straně tohoto dokumentu / Deklaracija(e) o skladnosti na hrbtni strani tega dokumenta / Vyhlásenie/-a o zhode sa nachádzajú na
zadnej strane dokumentu / A dokumentum hátlapján szereplő megfelelőségi nyilatkoz(ok) / Declaraţii de conformitate pe versoul acestui document
SAMES KREMLIN N° : 578.026.130-1901
DECLARATION UE DE CONFORMITE
EU DECLARATION OF CONFORMITY
EU- KONFORMITÄTSERKLÄRUNG
DECLARACIÓN UE DE CONFORMIDAD
DICHIARAZIONE DI CONFORMITÀ UE
DECLARAÇÃO UE DE CONFORMIDADE
EU-CONFORMITEITSVERKLARING
EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE
EU- VAATIMUKSENMUKAISUUSVAKUUTUS
DEKLARACJA ZGODNOŚCI UE
EU PROHLÁŠENÍ O SHODĚ
IZJAVA EU O SKLADNOSTI
VYHLÁSENIE O ZHODE
EU-MEGFELELŐSÉGI NYILATKOZAT
DECLARAŢIA DE CONFORMITATE UE
Le fabricant / The manufacturer / Der Hersteller
/ El fabricante / Il produttore / O fabricante
/ De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce
/ Proizvajalec / Výrobca / Gyártó / Fabricantul:
SAMES KREMLIN SAS
13, chemin de Malacher
38 240 - MEYLAN - FRANCE
Tél. : 33 (0)4 76 41 60 60
Déclare que le matériel désigné ci-après / Herewith declares that the equipment / erklärt hiermit, dass die / Declara que el material designado a
continuación / Dichiara che il materiale sottoindicato / Declara que o material a seguir designado / verklaart dat de hieronder aangeduide apparatuur
/ Kungör att den utrustning som anges här nedan / ilmoittaa, että alla mainitut laitteistot / Oświadcza, że wymienione poniżej urządzenia / Prohlašuje,
že níže uvedené vybavení / Izjavlja, da je opisana oprema spodaj / Vyhlasuje, že zariadenie uvedené nižšie / Kijelenti, hogy a megjelölt anyag a
továbbiakban / Declară că echipamentul precizat mai jos:
POMPES AIRLESS® FLOWMAX® / AIRLESS PUMPS - FLOWMAX®
/ AIRLESS PUMPE - FLOWMAX® / BOMBAS AIRLESS FLOWMAX®
34F60
Est conforme à la législation d’harmonisation de l’Union applicable suivante / Is in conformity with the relevant Union harmonisation legislation / Erfüllt
die einschlägigen Harmonisierungsrechtsvorschriften der Union / es conforme con la legislación de armonización pertinente de la Unión / è conforme
alla pertinente normativa di armonizzazione dell’Unione / in overeenstemming met de desbetteffende harmonisatiewetgeving van de Unie / med den
relevanta harmoniserade unionslagstiftningen / on asiaa koskevan unionin yhdenmukaistamislainsäädännön vaatimusten mukainen / jest zgodny z
odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego / Shoduje se s následující příslušnou evropskou harmonizační legislativou
/ V skladu s harmonizirano zakonodajo Unije / Je v súlade s uplatniteľnými harmonizačnými právnymi predpismi EÚ / Megfelel a következő
alkalmazandó uniós harmonizációs szabályozásnak / Este conform cu legislaţia aplicabilă de armonizare de mai jos
Directive ATEX / ATEX Directive /
/ ATEX-Richtijn / ATEX-direktivet / ATEX-direktivi / Dyrektywa ATEX / Směrnice ATEX / Direktiva ATEX / Smernica ATEX
/ ATEX-irányelv 2014/34/UE
II 2G T6
40F50
40F100
40F260 40F260_2
65F260 65F260_2
Est conforme à la législation d’harmonisation de l’Union applicable suivante / Is in conformity with the relevant Union harmonisation legislation / Erfüllt
die einschlägigen Harmonisierungsrechtsvorschriften der Union / es conforme con la legislación de armonización pertinente de la Unión / è conforme
alla pertinente normativa di armonizzazione dell’Unione / in overeenstemming met de desbetteffende harmonisatiewetgeving van de Unie / med den
relevanta harmoniserade unionslagstiftningen / on asiaa koskevan unionin yhdenmukaistamislainsäädännön vaatimusten mukainen / jest zgodny z
odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego / Shoduje se s následující příslušnou evropskou harmonizační legislativou
/ V skladu s harmonizirano zakonodajo Unije / Je v súlade s uplatniteľnými harmonizačnými právnymi predpismi EÚ / Megfelel a következő
alkalmazandó uniós harmonizációs szabályozásnak / Este conform cu legislaţia aplicabilă de armonizare de mai jos
Directive ATEX / ATEX Directive /
/ ATEX-Richtijn / ATEX-direktivet / ATEX-direktivi / Dyrektywa ATEX / Směrnice ATEX / Direktiva ATEX / Smernica ATEX
/ ATEX-irányelv 2014/34/UE
II 2G T5
SAMES KREMLIN - 2 - N° : 578.026.130-1901
La présente déclaration de conformité est établie sous la seule responsabilité du fabricant / This declaration of conformity is issued under the sole
responsibility of the manufacturer / Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller / La presente
declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante / La presente dichiarazione di conformità è rilasciata sotto la
responsabilità esclusiva del fabbricante / A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante / Deze
conformiteitsverklaring wordt verstrekt onder volledige verantwoordelijkheid van de fabrikant / Denna försäkran om överensstämmelse utfärdas på
tillverkarens eget ansvar / Tämä vaatimustenmukaisuusvakuutus on annettu valmistajan yksinomaisella vastuulla / Niniejsza deklaracja zgodności
wydana zostaje na wyłączną odpowiedzianość producenta / Toto prohláŝení o skodě se vydává na výhradní odpovědnost výrobce / Za izdajo te izjave
o skladnosti je odgovoren izključno proizvajalec / Toto vyhlásenie o zhode sa vydáva / na vlastnú zodpovednosť výrobcu / Ezt a megfelelőségi
nylatkozatot a gyártó kizárólagos felelőssége mellett adják ti / Prezenta declaraţie de conformitate este emisă pe răspunderea exclusivă a
producătorului.
Hervé WALTER
Directeur Innovation & Développement / Innovation & Development
Director / Direktor für Innovation & Entwicklung / Director de
Inovación y Desarrollo / Direttore Innovazione e sviluppo
/ Diretor de Inovação / Manager Innovatie en Ontwikkeling / Direktör
för Forskning och Utveckling / Innovaatio- ja kehitysjohtaja
/ Dyrektor ds. Innowacji I Rozwoju / Ředitel pro inovace a vývoj
/ Direktor za inovacije in razvoj / Riaditeľ pre inováciu a rozvoj
/ Innovációs és fejlesztési igazgató / Director Inovaţie şi Dezvoltare
Fait à Meylan, le / Established in Meylan, on / Geschehen zu Meylan, am / En Meylan, a / Redatto a Meylan, / Vastgesteld te Meylan, / Utformat i
Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, / Întocmită la Meylan,
pe data de 31/01/2019 - 01/31/2019
SAMES KREMLIN - 3 - N° : 578.026.130-1901
SAMES KREMLIN N° : 578.001.130-UK-1804
INSTALLATION AND SAFETY
INSTRUCTIONS
TRANSLATION FROM THE ORIGINAL MANUAL
IMPORTANT :Before assembly and start-up, please read and clearly understand all the
documents relating to this equipment (professional use only).
THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT
PRIOR NOTICE.
SAMES KREMLIN SAS
l
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
SAMES KREMLIN - 1 - N° : 578.001.130-UK-1804
1. SAFETY INSTRUCTIONS
GENERAL SAFETY INSTRUCTIONS
CAUTION : The equipment can be dangerous if you do not follow our
instructions concerning installation and servicing described in this manual
and in accordance with applicable European standards and local national safety
regulations.
Please carefully read all the instruction literature before operating your
equipment.
Only trained operators can use the equipment.
The foreman must ensure that the operator has understood the safety instructions for this equipment as
well as the instructions in the manuals for the different parts and accessories.
Read carefully all instruction manuals, label markings before operating the equipment.
Incorrect use may result in injury. This equipment is for professional use only. It must be used only for
what it has been designed for. Never modify the equipment. The parts and accessories supplied must be
regularly inspected. Defective or worn parts must be replaced.
Guards (motor cover, coupling shields, connectors,…) have been designed for a
safe use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure and / or
property damage due to destruction, the overshadowing or the partial or total
removal of the guards.
Never exceed the equipment components' maximum working pressure.
Comply with regulations concerning safety, fire risks, electrical regulations in force in the country of final
destination of the material. Use only products or solvent compatible with the parts in contact with the
material (refer to data sheet of the material manufacturer).
PICTOGRAMS
ADFECG
NIP HAZARD WARNING
MOVING
ELEVATOR
WARNING
MOVING PARTS
WARNING
MOVING SHOVEL
DO NOT
EXCEED THIS
PRESSURE
HIGH
PRESSURE
HAZARD
HJLKMQ
RELIEF OR
DRAIN VALVE
WARNING
HOSE UNDER
PRESSURE
WEAR GLASSES
OBLIGATORY
WEAR OF
GLOVES IS
OBLIGATORY
PRODUCT
VAPOR
HAZARDS
WARNING
HOT PARTS OR
AREAS
NPR
ELECTRICAL
HAZARD
WARNING
FIRE HAZARDS
EXPLOSION
HAZARDS
GROUNDING WARNING
(USER)
WARNING
SERIOUS
INJURIES
SAMES KREMLIN - 2 - N° : 578.001.130-UK-1804
PRESSURE HAZARDS
Current legislation requires that an air relief valve be fitted in the air supply circuit to the air
motor to prevent over pressurisation. This safety feature,ensures that it is not possible to supply
the air motor with excessive air pressure that may cause injury.
Please ensure that a material drain valve is fitted in the fluid circuit to drain and depressurise the
circuit. Once depressurised and drained, work /servicing may then commence on the equipment
Please remember to close these valves when restarting the system.
HIGH PRESSURE INJECTION HAZARDS
When working with high pressure equipment, special care is required. Fluid leaks can occur.
There is a risk of material being injected to any exposed parts of body, this could cause severe
injury :
medical care must be sought immediately if paint is injected under the skin or in other
parts of the body (eyes, fingers).
never point the spray gun at any one. Never try to stop the spray with your hands or fingers
nor with rags or similars.
follow the shut down procedure and always depressurize air and fluid circuits before
carrying out any servicing on the gun (cleaning, checking, maintenance of the material or
cleaning of the gun nozzles).
for the guns equipped with a safety device, always lock the trigger when not in use.
FIRE - EXPLOSION - SPARKS - STATIC ELECTRICITY HAZARDS
A poor earth connection, inadequate ventilation, sparks or static electricity can cause an
explosion or fire. to avoid these risks when using or servicing SAMES KREMLIN equipment, the
following safety procedures must be followed :
ensure a good earth connection and ground the parts to be handled i.e. solvents, materials,
components and equipment,
ensure adequate ventilation,
keep working area clean and free from waste solvents, chemicals, or solid waste i.e. rags,
paper and empty chemicals drums,
never use electrical switches / power if in an atmosphere of volatile solvent vapour,
stop working immediately in case of electrical arcs,
never store chemicals and solvents in the working area.
use paint whose flash point is the highest possible to prevent from any formation of gas
and inflammable vapours (refer to materials' safety instructions),
install a cover on the drums to reduce the diffusion of gas and vapours in the spraybooth.
TOXIC PRODUCT HAZARDS
Toxic products or vapours can cause severe injury not only though contact with the body, but also
if the products are ingested or inhaled. It is imperative :
to know the material products and their risks,
notified or hazardous materials must be stored in accordance with the regulations,
the material must be stored in an appropriate container, never place materials in a
container where there is a risk of spillage or leakage,
a procedure must be applied for the safe disposal of waste material. It must comply with all
prevailing regulations and legislations of the country where the equipment is to be used,
protective clothing should always be worn in compliance with the material manufacturers'
recommendations,
depending on the application and chemical safety instructions, safety glasses, hearing
protective earplug, gloves, foot wear, protective masks and possible breathing equipment
should be worn to comply with the regulations (Refer to chapter "Safety equipment of
SAMES KREMLIN selection guide).
SAMES KREMLIN - 3 - N° : 578.001.130-UK-1804
CAUTION!
It is forbidden to use material containing high concentrations of halogenated hydrocarbon
solvents with aluminium or zinc fillers .Non-compliance with the instructions may cause
explosion risk causing serious or fatal injury.
EQUIPMENT REQUIREMENTS
Guards (motor cover, coupling shields, connectors,…) have been designed for
a safe use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure
and / or property damage due to destruction, the overshadowing or the
partial or total removal of the guards.
PUMP
Before carrying out any work, it is imperative to read and clearly understand the disassembly and
reassembly instructions before servicing. The operator must understand the equipment and the
safety instructions. These instructions are available in the equipment manuals.
The air motor is designed to be mounted with a pump. Never modify any components or
couplings. When operating, please keep hands away from moving parts. Before starting up the
equipment, please read the PRESSURE RELIEF instructions. Please ensure that any relief or
drain valves fitted are in good working order.
HOSES
Keep hoses out of circulation areas, moving parts or hot surfaces,
Never expose product hoses to temperature higher than + 60°C / 140° F or lower than 0°C
/ 32° F,
Never pull or use the hoses to move the equipment,
Tighten all fittings as well as the hoses before operating the equipment,
Check the hoses regularly; change them if they are damaged,
Never exceed the maximum working pressure (MWP) indicated on the hose.
USED PRODUCTS
Considering the wide variety of products that are available and can be used in our equipment it is
impossible to check and make recommendations for all chemical data,regarding the risks of
possible chemical attack and their long term chemical reaction
SAMES KREMLIN can not be held liable for :
compatibility of wetted parts,
risks to staff and the surroundings,
for worn or defective parts, for faulty equipment or units, or the qualitiy of final product.
It is the responsibility of the user to know and prevent any possible risks such as toxic vapours,
fires or explosions. He shall determine the risks of immediate reactions or pursuant to repeated
exposures of the staff,
SAMES KREMLIN shall not be liable for physical injuries, direct or indirect material damages
caused by the use of chemicals.
SAMES KREMLIN - 4 - N° : 578.001.130-UK-1804
2. HANDLING
Check the weight and the dimensions of the equipment
(
refer to 'Technical features' section of the instruction manual
If weight and dimensions are too important, the unloading must be carried out by means of a forklift or
any other appropriate means with a qualified personnal and in a clear horizontal area to prevent from
risks of damage injury or an accident.
The centre of gravity is not in the centre of the machine : carry out by hand a stability-test after having
lifted the whole at 10 cm / 3.937" maximum.
After the unloading, the handling of the whole (eg: elevator pump) is carried out by means of a pallet
truck taking the bottom part of the frame.
Remark : Each pump motor is fitted with a ring. The ring is designed for the hoisting of one
pump and can not be used for the handling of the complete assembly.
3. STORING
Storing before installation :
- Storing ambient temperature : 0 / +50 °C / 0 / +122°F
- Protect the whole against dust, water trickling, dampness and shocks.
Storing after installation :
- Operating temperature : +15 / +35 °C / +59 / +138.2° F
- Protect the whole against dust, water tricling, dampness and shocks.
4. INSTALLATION OF THE EQUIPMENT
The machine is installed on a stable horizontal floor (for eg a concrete flag).
The machine shall be made stable by the use of holding down bolts or by the use of other anchoring
methods, strong enough to prevent unintended bodily movement of the equipment.
To avoid risks caused by static electricity, the equipment as well as its components must
be grounded.
For the pumping equipments (pumps, pneumatic rams, frame…), a section wire of 2.5
mm² is fixed on the material. Use this wire to connect the material to “the general ground”.
In case of severe environments (mechanical protection of the wire of earthing insufficient,
vibrations, mobile material…) where function damages at the ground are probable, the user
have to replace the provided wire of 2.5 mm² by a device more adapted to its environment
(wire with a more important section, bonding strip, fixing by thimble with eyelet…).
The continuity of the ground must be controlled by a qualified electrician. If the continuity of
the ground is not ensured, check the terminal, the wire and the earthing point. Never use the
material without have solved this problem.
In the severe cases of environments (mechanical protection of the wire of earthing
insufficient, vibrations, mobile material…) where damages of the function put at the ground
are probable, the user will have to replace the wire of 2.5 mm² provided, by a device more
adapted to its environment (wire of more important section, bonding strip, fixing by thimble
with eyelet…),
The gun must be 'grounded' via a material hose or an air hose. In case of spraying by
means of a gun with cup, the air hose must be conductive,
The materials to be painted must also be grounded.
All the materials situated in the working area shall be grounded.
SAMES KREMLIN - 5 - N° : 578.001.130-UK-1804
Never store more than necessary inflammable materials inside the working area,
The materials must be stored into approved drums and grounded,
Use only grounded metals containers for the use of cleaning solvents,
Cardboard and paper are prohibited.
5. MARKING OF THE EQUIPMENT
Each equipment has a label plate with the name of the manufacturer, the equipment part number,
the interesting informations to use correctly the equipment (pressure, voltage,…) and sometimes
the above pictogram.
The equipment is designed with and consists of high quality materials and components which can
be re-used.
The 2012/19/UE European Directive covers all equipments with a crossed-out bin pictogram.
Please inform yourself about the collection systems for electric and electronic equipments.
Please act in accordance with local rules and do not dispose of old equipment with household
wastes. A correct disposal of old equipment will help prevent negative consequences for the
environment and health.
SAMES KREMLIN N° : 578.028.110-UK-2204
FLOWMAX PUMP
34F60
Disassembly / Reassembly
TRANSLATION FROM THE ORIGINAL MANUAL
IMPORTANT : Before assembly and start-up, please read and clearly understand all the
documents relating to the equipment (professional use only).
THE PICTURES AND DRAWINGS ARE NOT CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT
PRIOR NOTICE.
SAMES KREMLIN SAS
l
13, chemin de Malacher
38 240 - MEYLAN - France
: 33 (0)4 76 41 60 60
www.sames-kremlin.com
SAMES KREMLIN - 1 - N° : 578.028.110-UK-2204
CAUTION :
Before any action on the pump, shut off the compressed air supply and
depressurize the system.
The pump is manufactured under the ATEX agreement and can not be modified.
SAMES KREMLIN will not be held responsible for any failure to comply with that instruction.
Guards (air motor cover, coupling shields, housings …) have been designed for safe
use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure and / or
damage to property due to removal or partial removal of the guards
VALVE ASSEMBLY (25)
Unscrew the 4 screws (38) and remove the
valves.
Unscrew the 2 screws (37) to remove the
upper body (36), the intermediate body (31)
and the lower body (26).
Unscrew the upper stop (34) to gain access to
the ball (28a), to the spring (33) and to the seat
support (27a).
Push in the middle of the lower stop (30) to
remove the seat support (27b) and the ball
(28b).
Change all the seals (29, 32 and 35).
Clean or change the parts if necessary.
Assembly :
Assemble new seals and lubricate them.
Place the lower stop (30), the ball (28b) and
the seat support (27b) into the intermediate
body (31).
Guide the parts in the axis unti stop in
the intermediate body.
Insert the seat support (27a) until stop into the
upper body (36), then locate the ball (28a) and
the spring (33).
Clean the threading of the upper stop (34) and
of the upper body (36). The threading of the
upper stop must be glued; then, screw it until
threading root.
Important : The play of the ball depends
on the correct assembly of the upper stop
(34).
Mount the lower body (26) into the body (31).
Make sure the fluid inlet-outlet are lined up.
29
29
29
33
36
35
34
30
31
38
32
27a
28a
37
32
27b
28b
38
29
26
Important : Mount the two screws (37) without tightening them in the lower body (26).
Make sure the parts are correctly lined up, then tighten the 2 screws (37).
Mount the whole on the fluid section. Take care of the 2 seals (32).
Replace the 4 screws (38).Tighten them gradually by screwing in criss-cross manner. Torque
screws.
SAMES KREMLIN - 2 - N° : 578.028.110-UK-2204
BELLOWS (2)
If material leaks under the base of the air motor, at
the leakage indicators, bellows must be replaced.
Proceed as previously explained when filling valve
is removed.
Remove suction body (1) by means of the 4
fastening screws (6).
The bellows is released when suction body is
taken out.
To reinstall the bellows : fits its lower part (small
diameter) in skirt (3).
Slip bellows on motor rod.
Screw the rod (12) into motor rod after having
installed the seal (4) and the filling valve (5). (The
whole must be slightly glued with Loctite
adhesive).
Lock the rod (12) using the motor rod flat.
Insert the suction body after pushing the motor rod
upwards.
Fill the 4 screws (6) and tighen them gradually by
screwing in criss-cross manner. Torque screws
(6).
Reinstall the other parts as indicated previously.
1
2
3
4
5
12
11
GT SEALS (7 & 16) AND PISTON (11)
Remove the valves.
Remove the suction chamber (17) by unscrewing
the 6 fastening screws (18).
Remove the lower GT seal (16).
Dismount the piston (11). When disassembling :
- Unscrew nut (14) holding rod (2) thanks to the
two flats located above the nut.
- Remove shutter (13).
- Remove piston pulling it downwards.
Remove cylinder (10).
Take off the upper GT seal (7).
Make sure the new seals (7 & 16) are
installed in the proper direction.
Both seals (8 & 15) must be replaced.
When reassembling, carefully insert piston (11)
into seal (7) which is in the reverse order.
Caution : Before tightening the nut (14),
- Place the rod (12) into piston (11).
- Place the piston (11) into the upper part of the
cylinder (10).
- Tighten the nut (14) holding the rod (12).
7
8
15
16
1
12
11
10
SAMES KREMLIN - 3 - N° : 578.028.110-UK-2204
FILLING VALVE (5)
Piston removal (11) : refer to § "PISTON".
Unscrew rod (12) from motor rod.
In case of wear, replace valve (5) and seal (4).
Caution !
When reinstalling, rod (12) must be glued into motor rod with Loctite adhesive.
REVERSING BLOCK
Guards (air motor cover, coupling shields, housings …) have been designed for safe
use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure and / or
damage to property due to removal or partial removal of the guards
Disassemble cover (51) by removing the 2 CHc screws (52).
Dissociate female yoke (54) from reversing block lever (55).
Dismount reversing block by removing screws (50).
Reinstall the new reversing block in the reverse order of the
disassembly sequence.
CAUTION : The number of spirals must equally be
distributed on each fastening parts in order to get the above
dimension.
31.85 mm ±0.5
When reassembling the different components :
- Clean the parts with the appropriate cleaning solvent.
- Install new seals if necessary, after having lubricated them with PTFE grease.
- Lubricate the piston and the inside of the cylinder to prevent from damaging the seals.
- Install new parts if necessary.
DEGREES OF WEAR
The wetted parts in contact with the material are subject to wear with time. It depends, of course, on
the rates and duration of pump operating; also on the material handled.
Under normal operating and servicing conditions, with standard filled material not including foreign
matters or chemically aggressive, the average working life can be estimated as :
- 1 million strokes for the tightness seals.
- 10 millions strokes for the bellows.
SAMES KREMLIN - 4 - N° : 578.028.110-UK-2204
ASSEMBLY INSTRUCTIONS
2
15
14
13
12
11
10
3
4
5
1
6
7
8
16
17
18
A 1
A 1
C 2
A 1
A 1
A 1
A 1
S 1
S 1
A 1
29
29
29
33
36
35
34
30
31
38
32
27
28
37
32
27
28
38
29
26
A 1
A 1
A 1
A 1
A 1
C 1
A 1
A 1
Ind. 25
Index Instructions Description Part number
A 1 PTFE grease 'TECHNILUB' grease
(10 ml / 0.0026 US gal) 560.440.101
C 1 Medium strength
Aneorobic Pipe sealant
Loctite 5772 (50 ml / 0.013 US gal) 554.180.015
C 2 Low strength
- Aneorobic Adhesive
Loctite 222 (50 ml / 0.013 US gal) 554.180.010
S 1 Torque screwing :
40 Nm / 29.5 Ft/Lbs
Doc. 573.300.050
Date/Datum/Fecha : 01/02/19
Annule/Cancels/
Ersetzt/Anula : 12/08/16
Modif. / Änderung : Mise à jour
/ Update / Aktualisierung
/ Actualización
KREMLIN REXSON SAMES
KREMLIN; 34A2 34F60
Pièces de rechange
Spare parts list
Ersatzteilliste
Piezas de repuesto
34F60 POMPE FLOWMAXAIRLESS/ FLOWMAXAIRLESS PUMP
FLOWMAXAIRLESS PUMPE / BOMBA FLOWMAXAIRLESS
SAMES KREMLIN 2 Doc. / Dok. 573.300.050
POMPE MURALE 34F60
avec filtre, avec canne d’aspiration
WALL MOUNTED PUMP,
MODEL 34F60 STAINLESS STEEL
with filter, with suction rod
#
WANDANLAGE 34F60 EDELSTAHL
mit Filter, mit Saugschlauch
BOMBA MURAL 34F60 INOX
con filtro, con caña de aspiración
151.740.700
Ind # Désignation Description Bezeichnung Denominación Qté
1 - Pompe nue 34F60 Bare pump, model 34F60 Pumpe 34F60, nackt Bomba sola, tipo 34F60 1
- 144 920 400 Moteur
(voir Doc. 573.004.050)
Air motor (refer to Doc.
573.004.050)
Luftmotor (siehe Dok.
573.004.050)
Motor (consultar Doc.
573.004.050)
1
- 144 910 700 Hydraulique F60 inox
(voir Doc. 573.301.050)
Fluid section, model
F60 stainless steel
(refer to Doc.
573.301.050)
Hydraulikteil F60
Edelstahl (siehe Dok.
573.301.050)
Hidráulica F60 inox
(consultar Doc.
573.301.050)
1
2 155 580 400 Filtre AIRLESS 3/8 en
inox
(voir Doc. 573.299.050)
AIRLESS filter, 3/8,
stainless steel
(refer to Doc.
573.299.050)
AIRLESS- Filter 3/8 aus
Edelstahl
(siehe Dok. 573.299.050)
Filtro AIRLESS 3/8 de
inox
(consultar Doc.
573.299.050)
1
3 149 596 150 Canne d'aspiration Ø 25
(Lg. 600 mm)
Suction rod Ø 25
(Length 600 mm)
Saugschlauch Ø 25
(Länge 600 mm)
Caña de aspiración Ø 25
(Longitud 600 mm)
1
4 149 596 152 Crépine Ø 25 Strainer Ø 25 Siebkörbe Ø 25 Piña Ø 25 1
5 055 580 301 Manchon inox
MM 3/8 NPT
Sleeve, stainless steel
MM 3/8 NPT
Langnippel Edelstahl
AG 3/8 NPT
Manguito inox
MM 3/8 NPT
1
6 049 596 000 Canne de purge en inox Drain rod, stainless steel Entleerungsschlauch,
Edelstahl
Caña de purga inox 1
7 144 920 200 Equipement d'air
(voir Doc. 573.403.050)
Air supply
(refer to Doc.
573.403.050)
Luftausrüstung
(siehe Dok. 573.403.050)
Equipo de aire
(consultar Doc.
573.403.050)
1
8 050 102 437 Raccord droit inox
M 1/2 BSP - M 26 x 125
Straight fitting, stainless
steel, double male,
1/2 BSP - 26 x 125
Gerader Nippel Edelstahl
AG 1/2 BSP - AG M 26 x
1,25
Racor recto inox
M 1/2 BSP - M 26 x 125
1
- 933 011 198 Vis H 8 x 16 Screw, model H 8 x16 Schraube H 8 x 16 Tornillo, tipo H 8 x 16 2
- 963 040 019 Rondelle MN 8 Washer, model MN 8 Scheibe MN 8 Arandela, tipo mn 8 2
POMPE 34F60 SUR CHARIOT CART-MOUNTED PUMP, model 34F60 #
PUMPE 34F60 , FAHRBAR BOMBA 34F60 SOBRE CARRETILLA 151.740.750
Ind # Désignation Description Bezeichnung Denominación Qté
- 151 740 700 Pompe murale Wall mounted pump Wandanlage Bomba mural 1
- 051 730 110 Chariot (1 bras)
(voir Doc. 578.064.110)
Cart (1 arm)
(refer to Doc
578.064.110)
Fahrgestell (1 Arm)
(siehe Dok. 578.064.110)
Carretilla (1 brazo)
(consultar Doc.
578.064.110)
1
SAMES KREMLIN 3 Doc. / Dok. 573.300.050
OPTIONS - ON REQUEST - OPTIONEN - OPCIONES
Ind # Désignation Description Bezeichnung Denominación Qté
3 149 596 160 Canne d’aspiration Ø 25
pour fût 200L (Lg. 1m)
Suction rod Ø 25
for drum 200L
(Length : 1m)
Saugschlauch Ø 25
für 200 L Fäss
(Länge : 1m)
Caña de aspiración Ø 25
para bidón de 200L
(Longitud : 1m)
1
4 149 596 152 Crépine Ø 25 Strainer Ø 25 Siebkörbe Ø 25 Piña Ø 25 1
Doc. 573.004.050
Date/Datum/Fecha : 11/05/17
Annule/Cancels/
Ersetzt/Anula : 22/10/13
Modif. / Änderung :
# 044 630 400 NC
(ind. 36a / Pos. 36a)
+ # 144 630 720
(ind. 36b / Pos. 36b)
Pièces de rechange
Spare parts list
Ersatzteilliste
Piezas de repuesto
MOTEUR A AIR, modèle 2000-2 AIR MOTOR, model 2000-2 #
LUFTMOTOR, Modell 2000-2 MOTOR DE AIRE, tipo 2000-2 144.920.400
SAMES KREMLIN 2 Doc. / Dok. 573.004.050
MOTEUR A AIR,
modèle 2000-2
AIR MOTOR,
model 2000-2
#
LUFTMOTOR,
Modell 2000-2
MOTOR DE AIRE,
tipo 2000-2
144.920.400
Ind # Désignation Description Bezeichnung Denominación Qté
1 044 920 301 Fond moteur supérieur Upper flange Oberer Motorflansch Fondo motor superior 1
2 044 920 302 Fond moteur inférieur Lower flange Unterer Motorflansch Fondo motor inferior 1
*3 044 920 306 Cylindre Cylinder Zylinder Cilindro 1
*4 044 920 303 Piston Piston Kolben Pistón 1
5 044 920 105 Palier inférieur Lower bearing Wellenlager Palier inferior 1
6 044 910 204 Palier Bearing Lager Palier 1
7 044 910 012 Tige moteur Rod, air motor Kolbenstange Eje del motor 1
8 044 910 017 Tirant Tie rod Haltebolzen Tirante 6
9 932 221 166 Vis Hc F 90° - M 4 x 12 Screw, Hc F 90°
- M 4 x 12
Schraube
Hc F 90” - M 4 x 12
Tornillo,
Hc F 90° - M 4 x 12
3
10 144 585 354 Joint Ø 23 (pochette de
10)
O-Ring Ø 23
(package of 10)
O-Ring Ø 23 (10er Pack) Junta Ø 23 (bolsa de 10) 1
11 044 720 016 Bague d'étanchéité Ring Dichtungsring Anillo de estanqueidad 1
13 050 068 400 Joint Seal O-Ring Junta 2
15 909 130 365 Bague R 63 Ring, R 63 O-Ring R 63 Anillo R 63 1
16 909 130 425 Bague R 23 Ring, R 23 O-Ring R 23 Anillo R 23 1
18 044 890 107 Butée de piston Piston thrust Kolbenanschlag Tope de pistón 2
19 930 151 502 Vis CHc M 10 x 40 Screw, CHc M 10 x 40 Schraube CHc M 10x14 Tornillo, CHc M 10 x 40 1
20 144 579 923 Joint R 8 bis
(pochette de 10)
Seal, R 8 bis
(package of 10)
O-Ring R 8 bis
(10er Pack)
Junta R 8 bis
(bolsa de 10)
4
24 902 202 110 Truarc D9 Circlips D9 Sicherungsring D9 Circlips D9 2
25 044 650 018 Bague de guidage Guide ring Führungsbuchse Anillo guía 2
29 953 010 019 Ecrou HM 8 Nut, HM 8 Mutter HM 8 Tuerca HM 8 6
30 963 040 019 Rondelle MN 8 Washer, MN 8 Scheibe MN 8 Arandela MN 8 6
31 044 920 304 Silencieux Muffler Schalldämpfer Silenciador 1
32 044 920 305 Support silencieux Support, muffler Schalldämpferhalterung Soporte silenciador 1
33 539 090 103 Entretoise polyamide
(lg. 10 mm)
Spacer, polyamid
(length : 10 mm / 13/32")
Zwischenstück aus
Polyamid (Länge 10 mm)
Tirante poliamida
(10 mm de largo)
2
34 933 151 497 Vis CHc M 6 x 40 Screw, CHc M 6 x 40 Schraube CHc M 6 x 40 Tornillo, CHc M 6 x 40 3
35 906 120 705 Vis Poelier M 6 x 16 Screw, M 6 x 16 Schraube M 6 x 16 Tornillo, M 6 x 16 2
36a NC / NS Bloc inverseur
(voir Doc. 573.087.040)
Reversing block
(refer to Doc.
573.087.040)
Umsteuerblock
(siehe Dok. 573.087.040)
Bloque inversor
(consultar Doc.
573.087.040)
1
*36
b
144 630 720 Bloc inverseur droit avec
deux roulements (voir
Doc. 573.087.040)
Right reversing-block
with two bearings
(refer to Doc.
573.087.040)
Rechter Umsteuerblock
mit zwei Lagerbuchsen
(siehe Dok. 573.087.040)
Bloque inversor derecho
con dos rodamientos
(consultar Doc.
573.087.040)
1
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53

Sames 34F60 Manual de utilizare

Sames
Marca
Sames
Model
34F60
Categorie
Pulverizator de vopsea
Tip
Manual de utilizare
Descărcați PDF
raport

în alte limbi

Lucrări conexe

Alte documente