Tellur TLL331531 Manual de utilizare

Marca: Tellur

Model: TLL331531

Tip: Manual de utilizare

Wi-Fi Wall Plug

TLL331531

Installation guide and operation instructions

Ghid de instalare și instrucțiuni de funcționare

Guía de instalación e instrucciones de funcionamiento

Guide d’installation et mode d’emploi

Guida all'installazione e istruzioni per l'uso

Einbauanleitung und Bedienungsanleitung

works with

Siri Voice

Thank you for choosing Tellur products!

To ensure an optimum performance and safety, please

read this user manual carefully before using the product.

Keep this user manual safe for future references.

1. GENERAL SAFETY INFORMATIONS:

1.1 WARNINGS

• We recommend that the installation be done by qualiﬁed

personnel.

• Make sure to switch off the electric power supply before

installing or maintaining the product!

• Make sure you have prepared the necessary tools suitable

for assembly, disassembly.

• Make sure that the devices connected do not exceed the

maximum operating output of the plug (3600W, 16A max)

• Your existing wires may have different colors than those

shown in the diagram. Make sure you know for sure the

function of each wire.

• Respect the technical speciﬁcations of the product and do

not use it outside the declared operating parameters.

1.2 ATTENTION

• To avoid wiring damage or abrasion, do not expose the wire

to edges of metal or other sharp objects.

• Do not install the product in an installation that exceeds the

maximum output limit, 3600W 16A.

• Don’t use the product if it is damaged in any way, shape, or

form.

• Don’t attempt to repair, disassemble, or modify this

product.

• Don’t place the product near any heat source or in direct

sunlight.

1.3 NOTES

• The Smart wall plug is designed only for single-pole

installation use and will require Neutral and Ground wires.

• In case of power source cut off, when energy is restored,

the wall plug can be set in APP to remain ON/OFF or

remember last state.

• USB and Type-C port are independent of AC output.

The ports are powered ON only when detects output

consumption bigger than 50mAh.

1.4 IMPORTANT NOTES ABOUT WIFI SMART CONTROL

WITH TELLUR SMART APP

• Make sure you have an active 2.4GHz Wi-Fi internet

network, and you have access to Wi-Fi password.

• This device is compatible with 2.4GHz Wi-Fi networks only.

5GHz Wi-Fi is not supported. If you don’t have 2.4GHz Wi-Fi

network available, check the router settings, contact a

specialized technician or the internet provider for support.

• The app does not support Wi-Fi 6 networks with 802.11ax

standard. Please set the 2.4GHz Wi-Fi network to

802.11b/g/n.

• No special gateway or HUB is required to remotely control

the product via Wi-Fi.

• Wi-Fi passwords should not include special characters

such as ~! @#$%^&*().

• Make sure your Wi-Fi internet is stable and the signal is

strong enough in the installation location.

Thank you for choosing Tellur products!

To ensure an optimum performance and safety, please

read this user manual carefully before using the product.

Keep this user manual safe for future references.

1. GENERAL SAFETY INFORMATIONS:

1.1 WARNINGS

• We recommend that the installation be done by qualiﬁed

personnel.

• Make sure to switch off the electric power supply before

installing or maintaining the product!

• Make sure you have prepared the necessary tools suitable

for assembly, disassembly.

• Make sure that the devices connected do not exceed the

maximum operating output of the plug (3600W, 16A max)

• Your existing wires may have different colors than those

shown in the diagram. Make sure you know for sure the

function of each wire.

• Respect the technical speciﬁcations of the product and do

not use it outside the declared operating parameters.

1.2 ATTENTION

• To avoid wiring damage or abrasion, do not expose the wire

to edges of metal or other sharp objects.

• Do not install the product in an installation that exceeds the

maximum output limit, 3600W 16A.

• Don’t use the product if it is damaged in any way, shape, or

form.

• Don’t attempt to repair, disassemble, or modify this

product.

• Don’t place the product near any heat source or in direct

sunlight.

1.3 NOTES

• The Smart wall plug is designed only for single-pole

installation use and will require Neutral and Ground wires.

• In case of power source cut off, when energy is restored,

the wall plug can be set in APP to remain ON/OFF or

remember last state.

• USB and Type-C port are independent of AC output.

The ports are powered ON only when detects output

consumption bigger than 50mAh.

1.4 IMPORTANT NOTES ABOUT WIFI SMART CONTROL

WITH TELLUR SMART APP

• Make sure you have an active 2.4GHz Wi-Fi internet

network, and you have access to Wi-Fi password.

• This device is compatible with 2.4GHz Wi-Fi networks only.

5GHz Wi-Fi is not supported. If you don’t have 2.4GHz Wi-Fi

network available, check the router settings, contact a

specialized technician or the internet provider for support.

• The app does not support Wi-Fi 6 networks with 802.11ax

standard. Please set the 2.4GHz Wi-Fi network to

802.11b/g/n.

• No special gateway or HUB is required to remotely control

the product via Wi-Fi.

• Wi-Fi passwords should not include special characters

such as ~! @#$%^&*().

• Make sure your Wi-Fi internet is stable and the signal is

strong enough in the installation location.

2. PRODUCT OVERVIEW

2.1 PRODUCT DIAGRAM

USB QC 3.0 18W max

Type-C PD 20W max

AC output plug

(Schuko)

Power button /

WiFi indicator

MAIN FUNCTIONS

• Safe, strong, and reliable construction. 3600W 16A (Max)

AC output.

• Additional Type-C (PD20W) & USB-A (QC 3.0 18W)

charging ports.

• Energy monitoring function.

• Remote Control via the Internet, using Tellur Smart APP

• Voice Control Through Alexa, Google, Siri Shortcuts

• Time-of-use scheduling and automation

• Power failure protection. Set the status of the wall plug

when the power comes back on, giving you full control over

your power supply.

• Equipped with a child protection function that can be

activated from the app, ensuring that the on/off button is

protected from accidental touch.

2.2 IN THE BOX

• WiFi Wall Plug

• Installation guide and operation instructions

2.3 NOTES - For full technical speciﬁcations please check

chapter 9

3. PRODUCT INSTALLATION

3.1 WARNING

Make sure to switch off the electric power supply before

installing or maintaining the product!

3.2 PREPARATIONS AND CHECKS BEFORE INSTALLATION

• We recommend that the installation be done by qualiﬁed

personnel.

• Make sure you have prepared the necessary tools suitable

for assembly, disassembly.

• Make sure that the devices connected do not exceed the

maximum operating output of the plug (3600W, 16A max)

• Your existing wires may have different colors than those

shown in the diagram. Make sure you know for sure the

function of each wire.

3.3 INSTALLATION/MOUNTING

• Attach Live, Neutral and Ground wires to the plug and

make sure the wires are ﬁrmly connected to the screws.

• Power the plug check if the manual button works properly

(ON/OFF)

• Check the LED light and continue with APP pairing using

Tellur Smart APP.

3.4 NOTES

3.4.1 LED Indicator status:

-Red Light – the plug is turned ON

-Blue Light – the plug is turned OFF

-Red/Green blinking Light – the plug is in pairing mode.

3.4.2 For Troubleshooting please check chapter 8

4. PAIRING THE DEVICE WITH TELLUR SMART APP

4.1 ATTENTION

• This device only supports 2.4GHz frequency band router,

does not support 5GHz frequency band router.

• Mare sure your phone is connected to the 2.4GHz wireless

network and you have access to Wi-Fi password before you

start the pairing procedure.

• The app doesn’t support Wi-Fi 6 networks with

802.11ax standard. Please set the 2.4GHz Wi-Fi network to

802.11b/g/n

• Wi-Fi passwords should not include special characters

such as ~! @#$%^&*().

• Make sure the Wi-Fi signal is strong enough in the area

where the device will be installed.

4.2 DOWNLOAD AND INSTALL THE TELLUR SMART APP

Available for either iOS or Android devices.

3. PRODUCT INSTALLATION

3.1 WARNING

Make sure to switch off the electric power supply before

installing or maintaining the product!

3.2 PREPARATIONS AND CHECKS BEFORE INSTALLATION

• We recommend that the installation be done by qualiﬁed

personnel.

• Make sure you have prepared the necessary tools suitable

for assembly, disassembly.

• Make sure that the devices connected do not exceed the

maximum operating output of the plug (3600W, 16A max)

• Your existing wires may have different colors than those

shown in the diagram. Make sure you know for sure the

function of each wire.

3.3 INSTALLATION/MOUNTING

• Attach Live, Neutral and Ground wires to the plug and

make sure the wires are ﬁrmly connected to the screws.

• Power the plug check if the manual button works properly

(ON/OFF)

• Check the LED light and continue with APP pairing using

Tellur Smart APP.

3.4 NOTES

3.4.1 LED Indicator status:

-Red Light – the plug is turned ON

-Blue Light – the plug is turned OFF

-Red/Green blinking Light – the plug is in pairing mode.

3.4.2 For Troubleshooting please check chapter 8

4. PAIRING THE DEVICE WITH TELLUR SMART APP

4.1 ATTENTION

• This device only supports 2.4GHz frequency band router,

does not support 5GHz frequency band router.

• Mare sure your phone is connected to the 2.4GHz wireless

network and you have access to Wi-Fi password before you

start the pairing procedure.

• The app doesn’t support Wi-Fi 6 networks with

802.11ax standard. Please set the 2.4GHz Wi-Fi network to

802.11b/g/n

• Wi-Fi passwords should not include special characters

such as ~! @#$%^&*().

• Make sure the Wi-Fi signal is strong enough in the area

where the device will be installed.

4.2 DOWNLOAD AND INSTALL THE TELLUR SMART APP

Available for either iOS or Android devices.

4.3 CREATE AN ACCOUNT

Once downloaded, the app will ask you to create an account

(if you don’t have any already). Enter your email, select the

country you live in and create a password for your Tellur

Smart account.

4.4 PRODUCT PAIRING

- We recommend having the Bluetooth function of the

smartphone activated for easier pairing.

• Open the Tellur Smart app and click “Add device” or “+”

and then select “Electrical Engineering” -> “Socket (Wi-Fi)”.

• Power on the plug and wait until the Wi-Fi LED is

ﬂashing quickly.

• If the LED doesn’t ﬂash, long press the manual switch

button for about 10 seconds.

• Select the Wi-Fi network, input your Wi-Fi password and

click "Next".

• Conﬁrm the LED is ﬂashing quickly in the app interface.

• Wait for the device to be added automatically. Tap “Done”

when ﬁnished and the device will appear in your list.

4.5 NOTES - For Troubleshooting please check chapter 8

5. TELLUR SMART APP FEATURES

1.Settings

2. Main power button ON/OFF

3. Timer and Schedule

4. Energy monitoring information.

5. Additional functions

• Timer and Schedule

– You can set Countdowns,

Schedule, Random, and other

automatizations.

• Smart - Create various automations and scenarios using

weather changes, other devices behavior or schedules.

• Settings – You can share the device with others, check

for ﬁrmware updates, rename, remove device, get

notiﬁcation if the device becomes ofﬂine.

• Energy monitoring – You can check the history of

energy consumption, instant consumption of power.

• Additional functions

Switch log - Statistic of ON/OFF

by time and date.

Relay Status – You can set the

status of plug after restoring the

electric supply (ON/OFF/Re-

member last status)

Light Mode – You can change

the LED behavior (completely

turned OFF,ON etc…)

Child Lock – When activated it

will need 4 consecutive presses

of the power button to activate

the plug.

6. AMAZON ALEXA INTEGRATION

NOTE – A smart display compatible with Amazon Alexa is

needed for a live preview of the doorbell’s camera.

1. Go to Home menu on Alexa app.

2. Select "Skills" / "Skills & Games".

3. Type Tellur Smart in the search bar.

4. Select Tellur Smart and click "Enable" to activate Tellur

Smart.

5. Enter your Tellur Smart account and password. Now you

have ﬁnished the integration with Alexa.

Tellur Smart app is now skilled with Alexa, and you can

vocally control the devices added in Tellur Smart.

Remember - if you rename your smart devices, use a simple

name that Alexa can recognize.

To control your smart devices through Alexa, use simple

and concise voice commands. Here is an example for

bedroom lighting:

“Alexa, turn off bedroom light”

“Alexa, turn on bedroom light”

“Alexa, dim bedroom light”

“Alexa, set bedroom light to red”

7. GOOGLE ASSISTANT INTEGRATION

NOTE – A smart display compatible with Google Home is

needed for a live preview of the doorbell’s camera.

Before using Google Home to control your devices, make

sure you meet the following conditions:

•You have a Google Home device or an Android device with

Google Assistant.

•You have the newest version of Google Home app.

•You have the newest version of Google app (Android only).

•The device display language is set to English US.

•You have the Tellur Smart app and a related account.

Add devices in Tellur Smart app (refer to app instructions)

– you can skip this part if you have already added some

devices to your Tellur Smart account. Make sure your

devices' names are easily recognizable.

Link account in Home Control

1.Go to Google Home's homepage and tap "+".

2. Hit the "Add new" button, enter Tellur Smart in the search

bar, and select the app from the list. Next, select your Tellur

Smart account's region, enter your Tellur Smart account and

password, and tap "Link now". After you assign rooms for

devices, your devices will be listed in the Home Control page.

Now you can control your smart devices through Google

Home. Take bedroom light as example – the supported

voice commands are as below:

• Ok Google, turn on/off bedroom light.

• Ok Google, set bedroom light to 50 percent.

• Ok Google, brighten bedroom light.

• Ok Google, dim bedroom light.

• Ok Google, set bedroom light to red.

8. TROUBLESHOOTING

• Make sure the device is powered on and the connection to

the power supply is good.

• Check the Wi-Fi connection of your phone.

• Check if the device is in pairing mode. Reset your smart

device to enter pairing mode.

• Check router or related: If you use a dual-band router,

select the 2.4GHz network to add the device. You also need

to enable the router's broadcasting function. Set encryption

method as WPA2-PSK and authorization type as AES or set

both on "auto".

• Check if the Wi-Fi signal is strong enough. To maintain

the signal strong, keep your router and the smart device as

close as possible.

• Wireless mode should be 802.11.b/g/n (Wi-Fi 6 protocol

802.11ax is not supported)

• Make sure you don't exceed the maximum number of

registered devices supported by the app (150).

• Check if the router's MAC ﬁltering function is enabled. If

so, remove the device from the ﬁlter list and make sure the

router is not prohibiting the device connection.

• Make sure the Wi-Fi password entered in the app is

correct.

Can I control the device with 3G/4G/5G network?

When adding the device for the ﬁrst time, the device and the

phone need to be connected to the same Wi-Fi network.

Once the device has been successfully paired with the

Tellur Smart app, you can remotely control it via 3G/4G/5G

networks.

How can I share my device with my family?

Open Tellur Smart app, go to "Proﬁle" -> "Device sharing"

-> "Sharing sent", tap "Add sharing" and share the device

with the added family members.

Notice - users must install the Tellur Smart app on their

device to see shared devices.

How can I manage the devices shared by others?

Open App, go to "Proﬁle" > "Device Sharing" > "Sharing

Received", then you can ﬁnd the devices shared by other

users. To delete a shared device, swipe left.

8. TROUBLESHOOTING

• Make sure the device is powered on and the connection to

the power supply is good.

• Check the Wi-Fi connection of your phone.

• Check if the device is in pairing mode. Reset your smart

device to enter pairing mode.

• Check router or related: If you use a dual-band router,

select the 2.4GHz network to add the device. You also need

to enable the router's broadcasting function. Set encryption

method as WPA2-PSK and authorization type as AES or set

both on "auto".

• Check if the Wi-Fi signal is strong enough. To maintain

the signal strong, keep your router and the smart device as

close as possible.

• Wireless mode should be 802.11.b/g/n (Wi-Fi 6 protocol

802.11ax is not supported)

• Make sure you don't exceed the maximum number of

registered devices supported by the app (150).

• Check if the router's MAC ﬁltering function is enabled. If

so, remove the device from the ﬁlter list and make sure the

router is not prohibiting the device connection.

• Make sure the Wi-Fi password entered in the app is

correct.

Can I control the device with 3G/4G/5G network?

When adding the device for the ﬁrst time, the device and the

phone need to be connected to the same Wi-Fi network.

Once the device has been successfully paired with the

Tellur Smart app, you can remotely control it via 3G/4G/5G

networks.

How can I share my device with my family?

Open Tellur Smart app, go to "Proﬁle" -> "Device sharing"

-> "Sharing sent", tap "Add sharing" and share the device

with the added family members.

Notice - users must install the Tellur Smart app on their

device to see shared devices.

How can I manage the devices shared by others?

Open App, go to "Proﬁle" > "Device Sharing" > "Sharing

Received", then you can ﬁnd the devices shared by other

users. To delete a shared device, swipe left.

Input:

AC 100-240V~50/60Hz 16A (Max)

AC Outlet:

Schuko

AC Output total:

3600W 16A (Max)

Grounding:

Yes

Type-C port:

1 x PD 5V/3A, 9V/2.22A 12V/1.67A 20W (Max)

USB QC 3.0 port:

1 x 5V/3A, 9V/2A,12V/1.5A 18W (Max)

Type-C + USB total output:

5V/3.4A

Energy Consumption

Monitoring:

Yes

Overload protection:

Yes

APP Name:

Tellur Smart

Siri Shortcuts:

Yes, compatible

Amazon Alexa:

Yes, compatible

Google Assistant:

Yes, compatible

Child protection function:

Available, can be set in APP

Electricity return status:

On / Off / Remember last status

Status setting for LEDs:

Available, can be set in APP

Wireless frequency:

2.4GHz

WiFi standard:

IEEE 802.11b/g/n

Security:

WPA-PSK/ WPA2-PSK /WPA/WPA2/WEP/WPS2/WAPI

Encryption type:

WEP/TKIP/AES

Standby consumption:

0.6W

Compatibility:

Devices with Android 4.2 / iOS 8 or more recently

Working temperature:

20~50℃

Working Humidity:

< 80%

Package includes:

WiFi Wall Plug

User Manual

Product dimensions:

86 x 86 x 43.5mm

Product weight:

90 gr

9.TECHNICAL SPECIFICATIONS

Disposal and recycling information

The crossed-out wheeled-bin symbol on your product,

battery, literature or packaging reminds you that all

electronic products and batteries must be taken to separate

waste collection points at the end of their working lives;

they must not be disposed of in the normal waste stream

with household garbage. It is the responsibility of the user

to dispose of the equipment using a designated collection

point or service for separate recycling of electrical and

electronic equipment waste (WEEE) and batteries according

to local laws. Proper collection and recycling of your

equipment helps ensure EEE waste is recycled in a manner

that conserves valuable materials and protects human

health and the environment. Improper handling, accidental

breakage, damage, and/or improper recycling at the end of

its life may be harmful for health and environment.

Tellur TLL331531 Manual de utilizare

Marca: Tellur

Model: TLL331531

Tip: Manual de utilizare

Descărcați PDF

raport

în alte limbi

English: Tellur TLL331531 User manual

Tellur TLL331531 Manual de utilizare

Tellur TLL331531 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente