Ubiquiti USG-PRO-4 Ghid de inițiere rapidă

Marca: Ubiquiti

Model: USG-PRO-4

Tip: Ghid de inițiere rapidă

Enterprise Gateway Router

with 2 Combination

SFP/RJ45 Ports

Model: USG-PRO-4

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi®

Security Gateway Pro. This Quick Start Guide is designed

to guide you through installation and also includes

warrantyterms.

Package Contents

UniFi Security Gateway Pro

Enterprise Gateway Router

with 2 Combination

SFP/RJ45 Ports

Model: USG-PRO-4

Power Cord Mounting Screws

(#10-32 x 5/8", Qty. 4)

Cage Nuts

(#10-32 x 5/8", Qty. 4)

Quick Start

Guide

UniFi Controller System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8/10

• Java Runtime Environment 1.6 (or above)

• Web Browser: Google Chrome (Other browsers may have

limited functionality.)

• UniFi Controller software v4.8 or higher (available at:

downloads.ubnt.com/unifi)

responsibility to follow local country regulations and indoor cabling requirements.

Network Requirement

A UniFi Cloud Key or management station running the UniFi

Controller software, located either on-site and connected to

the same Layer-2 network, or off-site in the cloud or NOC

UniFi Switch

USG-PRO-4

(DHCP Server)

Internet

UAP-AC-PRO UAP-AC-LR

LAN

WAN

UniFi Cloud Key

(UniFi Controller)

Remote Access to

UniFi Controller

UniFi Switch

UVP-PRO

UAP-AC Outdoor

13.2 GB

GUI 5.0.2075

REFRESH RATE CURRENT SITE USERNAME

minutes Default UBNT

29.6 1 5 18

WAN

LAN

WLAN

LATENCY THROUGHPUT

msec

DOWNLOADTHROUGHPUT &LATENCY DEVICES ON 2.4 GHZ CHANNEL

DEVICES ON 5 GHZ CHANNEL

Mbps

ACTIVE DEVICE ACTIVE DEVICES ACTIVE DEVICES

0.2

0.01

118

229

413

700

116

200

0.9

SPEED TEST

Inacve Inacve

Pending Pending

Inacve

Pending

40 40msec

30msec

20msec

10msec

msec

Mbps

UPLOAD

DEVICES CLIENTS

WAN

Ubiqui Streaming Media 6.49 GB

3.44 GB

921 MB

813 MB

1.25 GB

379 MB

Network Protocols

Web / Web 2.0

Security Update

Unknown

Other

NestLabs

Google

Desktop/Laptop

NAS

Other

LAN

WLAN

DEEP PACKET INSPECTION

THROUGHPUT& LATENCY

Avg/Max Throughput Latency

12HRS

NOW

HRS

40 44 48 52 56 60 64

100 104 108

112

116 120 124 128

132 136 140 144 149 153 157 165161

2 3 4 5 6 7 8 9 10 11

1Mbps

0.8Mbps

0.6Mbps

0.4

Mbps

0.2Mbps

24HRS 12HRS NOW

Mbps

msec

CLIENTS TRAFFICDEVICES

Sample Network Diagram

All UniFi devices support off-site management controllers.

For setup details, see the User Guide on our website at:

documentation.ubnt.com/unifi

Hardware Overview

Front Panel Ports

Console

SFP

USB

LAN

WAN

Interface Description

Console

RJ45 serial console port for Command

Line Interface (CLI) management. Use

an RJ45-to-DB9 serial console cable, also

known as a rollover cable, to connect

the Console port to your computer. Then

configure the following settings as needed:

• Baud rate 115200

• Data bits 8

• Parity NONE

• Stop bits 1

• Flow control NONE

USB Reserved for future use.

LAN

RJ45 ports support 10/100/1000 Ethernet

connections. By default, the LAN1 port is

set to DHCP Server, and its IP address is

192.168.1.1/24.

WAN

RJ45 ports support 10/100/1000 Ethernet

connections. A WAN port is active only if

the corresponding SFP port is empty. By

default, the WAN1 port is set to DHCP Client.

SFP

SFP ports are hot-swappable and support

10/100/1000 fiber SFP modules. If an SFP

module is plugged in, then the SFP port is

active, and the corresponding WAN port is

deactivated. By default, the SFP1 port is set

to DHCP Client.

Front Panel System LED

System

State Status

White Factory defaults, waiting for integration.

Blue

Successfully integrated into a network

and working properly.

Alternating

White/Blue

Device is busy; do not touch or unplug it.

This usually indicates that a process such

as a firmware upgrade is taking place.

Flashing Blue

This is used to locate a device.

When you click Locate in the UniFi

Controller software, the System LED

will flash blue. The software will also

display the location of the UniFi Security

Gateway Pro on the map.

Front Panel Port LEDs

SFP: Speed/Link/ActWAN: Speed/Link/ActLAN: Speed/Link/Act

LED State Status

LAN / WAN / SFP

Speed/

Link/

Act

Off No Link

Amber

Link Established at 10/100Mbps

Flashing Indicates Activity

Green

Link Established at 1000Mbps

Flashing Indicates Activity

*640-00128-03*

640-00128-03

Front Panel Button

Reset

Button Description

Reset

Resets to factory defaults. The UniFi

Security Gateway Pro should be running

after bootup is complete. Press and hold

the Reset button for about 10 seconds

until the right LED on the WAN2 port starts

flashing and then becomes solidly lit.

After a few seconds, the LED will turn off,

and the UniFi Security Gateway Pro will

automatically reboot.

Back Panel

Mounting Holes

Power

Ventilation Holes

Mounting Holes

Fans

Note: There are additional ventilation holes on the sides

of the UniFi Security Gateway Pro.

Installation Requirements

• Phillips screwdriver

• Standard-sized, 19" wide rack with a minimum of 1U height

available

• For indoor applications, use Category 5 (or above) UTP

cabling approved for indoor use.

• For outdoor applications, shielded Category 5 (or above)

cabling should be used for all wired Ethernet connections

and should be grounded through the AC ground of the

power supply.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial-grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit: www.ubnt.com/toughcable

WARNING: To reduce the risk of fire or electric shock,

do not expose this product to rain or moisture.

Note: Although the cabling can be located outdoors,

the UniFi Security Gateway Pro itself should be

housed inside a protective enclosure.

Hardware Installation

1. Connect the Power Cord to the Power port of the UniFi

Security Gateway Pro.

2. Attach the UniFi Security Gateway Pro to the rack using the

four Mounting Screws. (If the rack has square slots, then use

the Cage Nuts with the Mounting Screws.)

WARNING: FAILURE TO PROVIDE PROPER

VENTILATION MAY CAUSE FIRE HAZARD. KEEP

AT LEAST 20 MM OF CLEARANCE NEXT TO THE

VENTILATION HOLES FOR ADEQUATE AIRFLOW.

3. Connect the other end of the Power Cord to a power outlet.

Connecting Ethernet

1. Connect an Ethernet cable from a broadband modem or

WAN to the WAN1 port.

2. Connect an Ethernet cable from your computer or host

system to the LAN1 port.

3. Connect an Ethernet cable from your network switch to

the LAN2 port.

Using SFP Ports

To use an SFP port:

1. Remove the protective plug covering the SFP port.

2. Plug a compatible fiber module into the SFP port.

Note: The corresponding WAN port will be deactivated.

3. Connect a fiber optic cable to the fiber module. Then

connect the other end of the cable to another fiber device.

For information about compatible fiber SFP modules, visit:

community.ubnt.com/unifi

Software Installation

Download the latest version of the UniFi Controller software

at: downloads.ubnt.com/unifi

From a management station connected to the same Layer-2

network, launch the installer and follow the on-screen

instructions.

Note: If you already have UniFi Controller v4.8 or higher

installed, go to the section, Adopting the UniFi Security

Gateway Pro.

After you have installed the software and run the UniFi Setup

Wizard, a login screen will appear for the UniFi Controller

management interface. Enter the Admin Name and Password

that you created in the UniFi Setup Wizard. Then click Login.

You can manage your network and view network statistics

using the UniFi Controller management interface. For

information on using the UniFi Controller software, refer to the

User Guide located on our website at:

documentation.ubnt.com/unifi

Adopting the UniFi Security Gateway Pro

1. From the UniFi Controller dashboard, click Devices in the

left menu bar.

2. On the Devices screen, locate the UniFi Security Gateway

Pro in the list of devices under the Model column. To adopt

it, click Adopt.

3. The System LED on the UniFi Security Gateway Pro will turn

blue to confirm that it is successfully adopted.

Optional WAN Port Configuration via Layer 3

By default, the WAN1 port is set to DHCP so it can be assigned

network settings by the service provider. To change the

setting, connect a computer directly (or through a switch) to

the LAN1 port of the UniFi Security Gateway Pro.

1. From a web browser, go to: https://setup.ubnt.com

https://setup.ubnt.com

2. The UniFi Security Gateway Pro login window will appear.

Enter your Username and Password. Click Sign In.

Note: If the UniFi Security Gateway Pro has not been

adopted by a UniFi Controller, the login window will

be skipped and the Setup window will appear.

3. In the Setup window, click Edit Configuration to configure

the WAN1 port as DHCP, Static IP, or PPPoE.

For information on using the UniFi Controller software, refer to

the User Guide located on our website at:

documentation.ubnt.com/unifi

Specifications

UniFi Security Gateway Pro

Dimensions 484 x 44 x 164 mm

(19.06 x 1.73 x 6.46")

Weight 2.30 kg

(5.07 lb)

Networking Interfaces

Serial Console Port

Data Ports

(1) RJ45 Serial Port

(2) 10/100/1000 RJ45 Ports

(2) 10/100/1000 RJ45/SFP Combination Ports

Max. Power Consumption 40W

Power Supply Internal AC/DC Power Adapter,

60W (24V, 2.5A)

Supported Voltage Range 110 - 240VAC

LEDs

System

Data Ports

Status

Speed/Link/Activity

Layer 3 Forwarding

Performance

Packet Size: 64 Bytes

Packet Size: 512Bytes

or Larger

2,400,000 pps

4 Gbps (Line Rate)

Processor Dual-Core 1 GHz, MIPS64

with Hardware Acceleration

for Packet Processing

System Memory 2 GB DDR3 RAM

On-Board Flash Storage 4 GB

Rackmount Yes

Operating Temperature -10 to 45° C (14 to 113° F)

Operating Humidity 10 to 90% Noncondensing

Certications CE, FCC, IC

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Failure to provide proper ventilation may

cause fire hazard. Keep at least 20 mm of clearance next

to the ventilation holes for adequate airflow.

WARNING: To reduce the risk of fire or electric shock, do

not expose this product to rain or moisture.

WARNING: Do not use this product in location that can

be submerged by water.

WARNING: Avoid using this product during an electrical

storm. There may be a remote risk of electric shock from

lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current

requirements indicated on the manufacturer’s label. Connection to a

different power source than those specified may result in improper

operation, damage to the equipment or pose a fire hazard if the

limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service

should be provided only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has

an integral safety ground wire intended for connection to a grounded

safety outlet.

a. Do not substitute the power cord with one that is not the provided

approved type. Never use an adapter plug to connect to a 2-wire

outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the

safety certification, modification or misuse can provide a shock

hazard that can result in serious injury or death.

c. Contact a qualified electrician or the manufacturer if there

are questions about the installation prior to connecting the

equipment.

d. Protective earthing is provided by Listed AC adapter. Building

installation shall provide appropriate short-circuit backup

protection.

e. Protective bonding must be installed in accordance with local

national wiring rules and regulations.

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the

product(s) furnished hereunder (the “Product(s)”) shall be free from defects

in material and workmanship for a period of one (1) year from the date

of shipment by UBIQUITI NETWORKS under normal use and operation.

UBIQUITI NETWORKS’ sole and exclusive obligation and liability under

the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion,

to repair or replace any Product that fails to conform to the above

warranty during the above warranty period. The expense of removal and

reinstallation of any Product is not included in this warranty. The warranty

period of any repaired or replaced Product shall not extend beyond its

original term.

Warranty Conditions

The above warranty does not apply if the Product:

(I) has been modified and/or altered, or an addition made thereto,

except by Ubiquiti Networks, or Ubiquiti Networks’ authorized

representatives, or as approved by Ubiquiti Networks in writing;

(II) has been painted, rebranded or physically modified in any way;

(III) has been damaged due to errors or defects in cabling;

(IV) has been subjected to misuse, abuse, negligence, abnormal physical,

electromagnetic or electrical stress, including lightning strikes, or

accident;

(V) has been damaged or impaired as a result of using third party

firmware;

(VI) has no original Ubiquiti MAC label, or is missing any other original

Ubiquiti label(s); or

(VII) has not been received by Ubiquiti within 30 days of issuance of

the RMA.

In addition, the above warranty shall apply only if: the product has been

properly installed and used at all times in accordance, and in all material

respects, with the applicable Product documentation; all Ethernet cabling

runs use CAT5 (or above), and for outdoor installations, shielded Ethernet

cabling is used, and for indoor installations, indoor cabling requirements

are followed.

Returns

No Products will be accepted for replacement or repair without obtaining

a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS

during the warranty period, and the Products being received at UBIQUITI

NETWORKS’ facility freight prepaid in accordance with the RMA process of

UBIQUITI NETWORKS. Products returned without an RMA number will not

be processed and will be returned freight collect or subject to disposal.

Information on the RMA process and obtaining an RMA number can be

found at: www.ubnt.com/support/warranty.

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI

NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA,

SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM

AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND,

EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO,

REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY,

ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY,

SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS

FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY

WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR

TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES.

BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR

ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE

TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING

THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE

SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS

AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS

FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD

PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS,

DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT

CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY

OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant

that the operation of the Products will be error-free or that operation will

be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible

for damages or claims of any nature or description relating to system

performance, including coverage, buyer’s selection of products (including

the Products) for buyer’s application and/or failure of products (including

the Products) to meet government or regulatory requirements.

Limitation of Liability

EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL

UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR

DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES

(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING

OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE

PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER

LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.

Note

Some countries, states and provinces do not allow exclusions of implied

warranties or conditions, so the above exclusion may not apply to you.

You may have other rights that vary from country to country, state to

state, or province to province. Some countries, states and provinces do not

allow the exclusion or limitation of liability for incidental or consequential

damages, so the above limitation may not apply to you. EXCEPT TO

THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO

NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE

MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY

SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations

Convention on Contracts for the International Sale of Goods shall not apply

to any transactions regarding the sale of the Products.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. Operations of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

Industry Canada

CAN ICES-3(A)/NMB-3(A)

This Class A digital apparatus complies with Canadian CAN ICES-3(A).

CAN ICES-3(A)/NMB-3(A)

Cet appareil numérique de la classe A est conforme à la norme NMB-3(A)

Canada.

Australia and New Zealand

Warning: This is a Class A product. In a domestic environment this

product may cause radio interference in which case the user may

be required to take adequate measures.

CE Marking

CE marking on this product represents the product is in compliance with all

directives that are applicable to it.

RoHS/WEEE Compliance Statement

English

European Directive 2012/19/EU requires that the equipment bearing

this symbol on the product and/or its packaging must not be disposed

of with unsorted municipal waste. The symbol indicates that this

product should be disposed of separately from regular household waste

streams. It is your responsibility to dispose of this and other electric and

electronic equipment via designated collection facilities appointed by the

government or local authorities. Correct disposal and recycling will help

prevent potential negative consequences to the environment and human

health. For more detailed information about the disposal of your old

equipment, please contact your local authorities, waste disposal service, or

the shop where you purchased the product.

Deutsch

Die Europäische Richtlinie 2012/19/EU verlangt, dass technische

Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem

Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall

entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt

von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es

liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische

und elektronische Geräte über die dafür zuständigen und von der

Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu

entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,

potentielle negative Folgen für Umwelt und die menschliche Gesundheit

zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer

Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder

städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das

Produkt erworben haben.

Pagina se încarcă ...

Ubiquiti USG-PRO-4 Ghid de inițiere rapidă

Marca: Ubiquiti

Model: USG-PRO-4

Tip: Ghid de inițiere rapidă

Descărcați PDF

raport

în alte limbi

English: Ubiquiti USG-PRO-4 Quick start guide
italiano: Ubiquiti USG-PRO-4 Guida Rapida
español: Ubiquiti USG-PRO-4 Guía de inicio rápido

Ubiquiti USG-PRO-4 Ghid de inițiere rapidă

Ubiquiti USG-PRO-4 Ghid de inițiere rapidă

în alte limbi

Lucrări conexe

Alte documente