15 GB/CY
Insert the new batteries, type LR06, in the battery compartment
7
.
Check the polarity of the battery during insertion. This is indicated in
the battery compartment.
Close the battery cover.
The display
1
will briefly light up and run a brief check of all dis-
play elements.
The outdoor temperature field
24
will show an animation of the re-
ception symbol
, indicating the base station is searching for the
signal from the outdoor sensor.
If no outdoor temperature is displayed after 3 minutes,the base sta-
tion will stop searching. The animation of the reception symbol will
turn off and the outdoor temperature field will show --._ °C and --._ %.
Most likely, the signal cannot be received due to structural factors, re-
inforced concrete walls, the brickwork being too solid, or the
distance between the units. After finding a better location for the
outdoor sensor, reception will need to be restarted.
Press and hold the CH button
17
at the back of the base station for
3 seconds until the reception signal becomes animated again.
The weather station will automatically start receiving the DCF radio
signal, regardless if signal from the outdoor sensor was received or
not. The clock field
21
will show an animated radio tower icon , in-
dicating the receiver for the DCF signal is starting to receive the time.
The DCF signal (time transmitter)
The DCF signal (German time transmission station) consists of time im-
pulses emitted by one of the most accurate clocks in the world, located
near Frankfurt / Main, Germany.
In ideal conditions, your weather station can pick up this signal over a
distance of up to approx. 1500 km around Frankfurt / Main.
91679_aur_Funk-Wetterstation_Content_RO.indd 15 28.06.13 11:57