Hikvision DS-2CD6W45G0-IVS Ghid de inițiere rapidă

Tip
Ghid de inițiere rapidă
Network Camera
Quick Start Guide
User Manual
1
Table of Contents
English ..................................................................................................... 17
Français ................................................................................................... 19
Deutsch ................................................................................................... 22
Español .................................................................................................... 24
Italiano .................................................................................................... 26
Português ................................................................................................ 28
Nederlands .............................................................................................. 30
Čeština .................................................................................................... 32
Dansk ...................................................................................................... 34
Magyar .................................................................................................... 36
Polski ....................................................................................................... 38
Română ................................................................................................... 40
Slovenčina ............................................................................................... 42
Bahasa Indonesia ..................................................................................... 44
 ......................................................................................................... 46
rkçe ..................................................................................................... 49
Русский ................................................................................................... 50
Українська .............................................................................................. 53

.......................................................................................................... 55
2
Symbols and Marks
Notice
i. Not necessarily included
accessory.
ii. Variable accessory
amount.
iii. Skip this step if not
required.
Warning
MicroSD card
Forbidden
Purchase separately
Correct
Disposal
Incorrect
Functional grounding
Turn to page A and
continue.
Grounding
Other situations
Skip this step if not
necessary
Waterproof
Other situations omitted
Activate and Access Network Camera
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
English
Interface Introduction
1
Power input interface
2
Power output interface
3
Network interface
4
Alarm input interface
5
Alarm output interface
6
Audio input interface
7
Audio output interface
8
Built-in microphone
9
Built-in speaker
10
BNC/CVBS interface
11
HDMI interface
12
SDI interface
13
SD card slot
14
SIM card slot
15
Reset button
16
Fiber optical interface
17
Heater
18
USB
19
Antenna
20
RS-485
21
RS-232
22
ABF
23
Grounding
24
Wiegand interface
25
Solar panel
26
Battery switch
27
Debug power interface
28
Solar panel power interface
29
External solar panel interface
30
SOC debug serial port
31
MCU debug serial port
32
Video input interface
33
Video output interface
34
Aviation Plug
35
Battery power output interface
36
Debug network interface
Note: The interface varies with the models. Please refer to the
product datasheet for details.
Regulatory Compliance and Safety Information
Read all information and instructions in this document carefully
before using the device and keep it for further reference.
For more device information and instructions, please visit our
website at https://www.hikvision.com. You can also refer to other
documents (if any) accompanying the device or scan the QR code (if
any) on the packaging to get more information.
About this Document
The document includes instructions for using and managing the
product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The
information contained in the document is subject to change,
without notice, due to firmware updates or other reasons. Please
find the latest version in the company website
(https://www.hikvision.com).
Please use this document under the guidance of professionals.
© 2023 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
Trademarks
and other Hikvision’s trademarks and logos are the
properties of Hikvision in various jurisdictions. Other trademarks
and logos mentioned are the properties of their respective
owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT
YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET
PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL
NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER
INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN
A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY,
INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND
OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR
ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR
PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE
DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL
WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY
NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN
SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND
THE APPLICABLE LAW, THE LATTER PREVAILS.
18
These clauses apply only to the products bearing the
corresponding mark or information.
FCC Compliance Statement
Note: This product has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
product generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this product does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
EU/UK Compliance Statement
According to the Waste Electrical and Electronic Equipment
Regulations 2013: Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the United Kingdom.
For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it
at designated collection points. For more information see:
www.recyclethis.info.
Directive 2006/66/EC and its amendment 2013/56/EU
(Battery Directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in
the European Union. See the product documentation
for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the battery
to your supplier or to a designated collection point. For more
information see: www.recyclethis.info.
According to the Batteries and Accumulators (Placing on the
Market) Regulations 2008 and the Waste Batteries and
Accumulators Regulations 2009: This product contains a battery
that cannot be disposed of as unsorted municipal waste in the
United Kingdom. See the product documentation for specific
battery information. The battery is marked with this symbol, which
may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information
see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B)/NMB-003 (B) standards
requirements.
Cet appareil répond aux exigences des normes CAN ICES-003
(B)/NMB-003 (B).
KC
B 기기: 기기는 가정(B) 전자파적합기기로써 주로
가정에서 사용하는 것을 목적으로 하며, 모든 지역에서 사용할
있습니다.
Safety Instruction
These instructions are intended to ensure that the user can use
the product correctly to avoid danger or property loss.
Laws and Regulations
The device should be used in compliance with local laws, electrical
safety regulations, and fire prevention regulations.
Electricity
In the use of the product, you must be in strict compliance with
the electrical safety regulations of the nation and region. The
equipment shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
equipment. Provide a surge suppressor at the inlet opening of the
equipment under special conditions such as the mountain top,
iron tower, and forest. CAUTION: If the fuse of the device can be
replaced, replace it only with the same model to reduce the risk of
fire or electric shock. Do not touch the bare components (such as
the metal contacts of the inlets) and wait for at least 5 minutes,
since electricity may still exist after the device is powered off.
Battery
Do not ingest battery. Chemical burn hazard! This product
contains a coin/button cell battery. If the coin/button cell battery
is swallowed, it can cause severe internal burns in just 2 hours and
can lead to death. Keep new and used batteries away from
19
children. If the battery compartment does not close securely, stop
using the product and keep it away from children. If you think
batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention. CAUTION: Risk of
explosion if the battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions. Improper
replacement of the battery with an incorrect type may defeat a
safeguard (for example, in the case of some lithium battery types).
Do not dispose of the battery into fire or a hot oven, or
mechanically crush or cut the battery, which may result in an
explosion. Do not leave the battery in an extremely high
temperature surrounding environment, which may result in an
explosion or the leakage of flammable liquid or gas. Do not subject
the battery to extremely low air pressure, which may result in an
explosion or the leakage of flammable liquid or gas. + identifies
the positive terminal(s) of equipment which is used with, or
generates direct current. - identifies the negative terminal(s) of
equipment which is used with, or generates direct current.
Fire Prevention
No naked flame sources, such as lighted candles, should be placed
on the equipment. The serial port of the equipment is used for
debugging only.
Hot Surface Prevention
CAUTION: Hot parts! Burned fingers when handling the parts. Wait
one-half hour after switching off before
handling parts. This sticker is to indicate
that the marked item can be hot and
should not be touched without taking
care. For device with this sticker, this device is intended for
installation in a restricted access location, access can only be
gained by service persons or by users who have been instructed
about the reasons for the restrictions applied to the location and
about any precautions that shall be taken.
Installation
Install the device according to the instructions in this manual. To
prevent injury, this device must be securely attached to the
installation surface in accordance with the installation instructions.
Never place the equipment in an unstable location. The
equipment may fall, causing serious personal injury or death. If the
device needs to be wired by yourself, select the corresponding
wire to supply power according to the electric parameters labeled
on the device. Strip off wire with a standard wire stripper at
corresponding position. To avoid serious consequences, the length
of stripped wire shall be appropriate, and conductors shall not be
exposed. Make sure that the power has been disconnected before
you wire, install, or disassemble the device.
Power Supply
Device powered by Safety Extra-Low Voltage (SELV): The power
source should meet limited power source or PS2 requirements
according to IEC 60950-1 or IEC 62368-1 standard.
Device powered by AC mains supply voltage: The equipment must
be connected to an earthed mains socket-outlet. An appropriate
readily accessible disconnect device shall be incorporated external
to the equipment. An appropriate overcurrent protective device
shall be incorporated external to the equipment, not exceeding
the specification of the building. An all-pole mains switch shall be
incorporated in the electrical installation of the building. If the
device is powered by terminals connected to the power cord,
ensure correct voltage and wiring of the terminals for connection
to mains supply. The equipment has been designed, when
required, modified for connection to an IT power distribution
system.
White Light Illuminator (If supported)
Possibly hazardous optical radiation emitted from this product. DO
NOT stare at operating light source. May be harmful to the eyes.
Wear appropriate eye protection or DO NOT turn on the white
light when you assemble, install or maintain the camera.
Transportation
Keep the device in original or similar packaging while transporting
it.
System Security
The installer and user are responsible for password and security
configuration.
Maintenance
If the product does not work properly, please contact your dealer
or the nearest service center. We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance. A few device components (e.g., electrolytic
capacitor) require regular replacement. The average lifespan
varies, so periodic checking is recommended. Contact your dealer
for details.
Cleaning
Please use a soft and dry cloth when clean inside and outside
surfaces of the product cover. Do not use alkaline detergents.
Using Environment
When any laser equipment is in use, make sure that the device
lens is not exposed to the laser beam, or it may burn out. DO NOT
expose the device to high electromagnetic radiation or dusty
environments. For indoor-only device, place it in a dry and
well-ventilated environment. DO NOT aim the lens at the sun or
any other bright light. Make sure the running environment meets
the requirement of the device. DO NOT place the camera in
extremely hot, cold, dusty or damp locations, and do not expose it
to high electromagnetic radiation.
Emergency
If smoke, odor, or noise arises from the device, immediately turn
off the power, unplug the power cable, and contact the service
center.
Time Synchronization
Set up device time manually for the first time access if the local
time is not synchronized with that of the network. Visit the device
via Web browse/client software and go to time settings interface.
Reflection
Make sure that no reflective surface is too close to the device lens.
The IR light from the device may reflect back into the lens causing
reflection.
Français
Conformité à la réglementation et consignes de sécurité
Lisez soigneusement toutes les informations et instructions de ce
document avant d’utiliser l’appareil et conservez-le pour toute
référence ultérieure.
Pour plus d’informations et d’instructions sur l’appareil, veuillez
consulter notre site Internet à l’adresse
https://www.hikvision.com. Vous pouvez également consulter les
autres documents (le cas échéant) accompagnant l’appareil ou
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58

Hikvision DS-2CD6W45G0-IVS Ghid de inițiere rapidă

Tip
Ghid de inițiere rapidă