Parkside PAP 20 A3 Operating Instructions Manual

4 Ah BATTERY PAP 20 A3

IAN 310944

AKKU 4 Ah

Bedienungsanleitung

АКУМУЛАТОРНА

БАТЕРИЯ 4 Ah

Ръководство за експлоатация

ACUMULATOR 4 Ah

Instrucţiuni de utilizare

EПANAфOPTIZOMENH

MПATAPIA 4 Ah

Οδηүίες χρήσης

BATERIJA 4 Ah

Uputstvo za upotrebu

4 Ah BATTERY

Operating instructions

GB / CY Operating instructions Page 1

RS Uputstvo za upotrebu Strana 21

RO Instrucţiuni de utilizare Pagina 43

BG Ръководство за

експлоатация Cтраница 63

GR / CY Οδηүίες χρήσης Σελίδα 87

DE / AT / CH Bedienungsanleitung Seite 107

A

All Parkside tools of the X20V Team series are com-

patible with the PAP 20 A1 / PAP 20 A2 / PAP 20 A3

battery pack.

20V max.

18V

PAP 20 A3 GB

│

CY

│

1 ■

Contents

Introduction ........................2

Intended use ............................. 2

Features ................................ 3

Package contents ......................... 3

Technical data ........................... 3

General Power Tool Safety Warnings ..5

Extended safety guidelines .................. 7

Charging the battery pack (see ﬁg. A) ..8

Checking the battery charge level ............ 9

Maintenance and storage ...........10

Kompernass Handels GmbH warranty 11

Service ................................14

Importer ...............................14

Disposal ..........................15

Notes concerning the EC Declaration of

Conformity .......................17

Ordering a replacement battery ......18

Telephone ordering ......................19

PAP 20 A3■ 2

│

GB

│

CY

Introduction

Congratulations on the purchase of your new appli-

ance. You have chosen a high-quality product. The

operating instructions are part of this product. They

contain important information about safety, usage and

disposal. Before using the product, please familiarise

yourself with all operating and safety instructions.

Use the product only as described and for the range

of applications speciﬁed. Please also pass these

operating instructions on to any future owner.

Intended use

This rechargeable battery is suitable for:

This rechargeable battery is not intended for com-

mercial use. Any other usage of or modiﬁcation to

the appliance is deemed to be improper and carries

a signiﬁcant risk of accidents. The manufacturer

accepts no responsibility for damage(s) attributable

to misuse.

PAP 20 A3 GB

│

CY

│

3 ■

Features

Battery pack

Battery charge level button

Battery display LED

High-speed charger (not supplied)

Red charge control LED

Green charge control LED

Package contents

1 4 Ah battery

1 set of operating instructions

Technical data

4 Ah battery: PAP 20 A3

Type: LITHIUM ION

Rated voltage: 20 V (DC)

Capacity: 4.0 Ah

Cells: 10

PAP 20 A3■ 4

│

GB

│

CY

To charge the battery pack, use only the

following high-speed battery charger:

X20V Team Serie

(not supplied)

PLG 20 A2:

INPUT:

Rated voltage: 230–240 V ∼, 50 Hz

(AC)

Rated power

consumption: 85 W

Fuse (internal): 3.15 A

T3.15A

OUTPUT:

Rated voltage: 21.5 V (DC)

Rated current: 3.5 A

Charging time: approx. 80 min

Protection class: II / (double insulation)

PAP 20 A3 GB

│

CY

│

5 ■

General Power Tool

Safety Warnings

WARNING!

■ Read all safety warnings and all instructions.

Failure to follow the warnings and instructions

may result in electric shock, ﬁre and/or serious

injury. Save all warnings and instructions for

future reference.

a) Charge a rechargeable battery unit using only

the charger recommended by the manufacturer.

Chargers are often designed for a particular type

of rechargeable battery unit. There is the danger

of ﬁre if other types of rechargeable battery units

are used.

b) Only the rechargeable battery units supplied

are to be used with an electrical power tool.

The use of other rechargeable battery units may

lead to the danger of injury or ﬁre.

PAP 20 A3■ 6

│

GB

│

CY

c) When they are not being used, store recharge-

able battery units away from paperclips, coins,

keys, nails, screws or other small metal objects

that could cause the contacts to be bridged.

Short-circuiting the contacts of a rechargeable

battery unit may result in heat damage or ﬁre.

d) Fluids may leak out of rechargeable battery

units if they are misused. If this happens, avoid

contact with the ﬂuid. If contact occurs, ﬂush

the aﬀected area with water. Seek additional

medical help if any of the ﬂuid gets into your

eyes. Escaping battery ﬂuid may cause skin

irritation or burns.

CAUTION! RISK OF EXPLOSION!

Never charge non-rechargeable

batteries!

Protect the rechargeable battery from

heat, for example from continuous

exposure to sunlight, ﬁre, water and

moisture.

There is a risk of explosion.

PAP 20 A3 GB

│

CY

│

7 ■

Extended safety guidelines

■ Do not use a damaged or modiﬁed battery.

Damaged or modiﬁed batteries may behave

unexpectedly and cause ﬁres, explosions or pose

a risk of injury.

■ Do not expose a battery to ﬁre or excessively

high temperatures. Fire or temperatures in excess

of 130°C (265°F) can cause an explosion.

■ Follow all instructions regarding charging and

never charge the battery or the cordless tool

outside the temperature range given in the

operating instructions.

Incorrect charging or charging outside of the

permissible temperature range can destroy the

battery and increase the risk of ﬁre.

PAP 20 A3■ 8

│

GB

│

CY

Charging the battery pack

(see ﬁg. A)

CAUTION!

► Always unplug the appliance before you

remove the battery pack from or connect the

battery pack to the charger.

NOTE

► Never charge the battery pack if the ambient

temperature is below 10°C or above 40°C.

If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level is

between 50% and 80%. The storage climate

should be cool and dry and the ambient tem-

perature should be between 0°C and 50°C.

♦ Connect the battery pack to the high-speed

battery charger (see ﬁg. A).

♦ Insert the power plug into the socket. The control

LED lights up red.

♦ The green LED indicates that the charging

process is complete and the battery pack is

ready.

PAP 20 A3 GB

│

CY

│

9 ■

CAUTION!

♦ If the red control LED ﬂashes, this means

that the battery pack has overheated and

cannot be charged.

♦ If the red and green control LEDs

both

ﬂash, this means that the battery pack is

broken.

♦ Switch oﬀ the charger for at least 15 minutes

between successive charging sessions. Also

disconnect the power plug from the mains power

socket.

Checking the battery charge level

♦ Press the battery charge level button to check

the status of the battery (see also main diagram).

The status/remaining charge will be shown on the

battery display LED as follows:

♦ RED/ORANGE/GREEN = maximum charge

RED/ORANGE = medium charge

RED = low charge – charge the battery

PAP 20 A3■ 10

│

GB

│

CY

Maintenance and storage

■ If you do not intend to use the battery for an ex-

tended period, remove it from the appliance and

store it in a clean, dry place out of direct sunlight.

■ If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level is

between 50% and 80%. The optimum storage

environment is cool and dry.

■ Never try to repair damaged batteries.

Maintenance of batteries should only be carried

out by the manufacturer or an approved customer

service centre.

PAP 20 A3 GB

│

CY

│

11 ■

Kompernass Handels GmbH

warranty

Dear Customer,

This appliance has a 6 months warranty valid from the

date of purchase. If this product has any faults, you,

the buyer, have certain statutory rights. Your statutory

rights are not restricted in any way by the warranty

described below.

Warranty conditions

The validity period of the warranty starts from the

date of purchase. Please keep your original receipt

in a safe place. This document will be required as

proof of purchase.

If any material or production fault occurs within 6

months of the date of purchase of the product, we

will either repair or replace the product for you at our

discretion. This warranty service is dependent on you

presenting the defective appliance and the proof of

purchase (receipt) and a short written description of

the fault and its time of occurrence.

If the defect is covered by the warranty, your product

will either be repaired or replaced by us. The repair

or replacement of a product does not signify the

beginning of a new warranty period.

PAP 20 A3■ 12

│

GB

│

CY

Warranty period and statutory claims for defects

The warranty period is not prolonged by repairs

eﬀected under the warranty. This also applies to

replaced and repaired components. Any damage

and defects present at the time of purchase must be

reported immediately after unpacking. Repairs car-

ried out after expiry of the warranty period shall be

subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance

with strict quality guidelines and inspected meticu-

lously prior to delivery.

The warranty covers material faults or production

faults. The warranty does not extend to product parts

subject to normal wear and tear or fragile parts such

as switches, batteries, baking moulds or parts made

of glass.

The warranty does not apply if the product has been

damaged, improperly used or improperly maintained.

The directions in the operating instructions for the

product regarding proper use of the product are to

be strictly followed. Uses and actions that are dis-

couraged in the operating instructions or which are

warned against must be avoided.

PAP 20 A3 GB

│

CY

│

13 ■

This product is intended solely for private use and

not for commercial purposes. The warranty shall be

deemed void in cases of misuse or improper han-

dling, use of force and modiﬁcations / repairs which

have not been carried out by one of our authorised

Service centres.

Warranty claim procedure

To ensure quick processing of your case, please ob-

serve the following instructions:

■ Please have the till receipt and the item number

(e.g. IAN 12345) available as proof of pur-

chase.

■ You will ﬁnd the item number on the type plate,

an engraving on the front page of the instructions

(bottom left), or as a sticker on the rear or bottom

of the appliance.

■ If functional or other defects occur, please con-

tact the service department listed either by tel-

ephone or by e-mail.

■ You can return a defective product to us free of

charge to the service address that will be pro-

vided to you. Ensure that you enclose the proof of

purchase (till receipt) and information about what

the defect is and when it occurred.

PAP 20 A3■ 14

│

GB

│

CY

You can download these instructions

along with many other manuals, product

videos and software on

www.lidl-service.com.

Service

Service Great Britain

Tel.: 0800 404 7657

E-Mail: kom[email protected]

CY

Σέρβις Κύπρος

Tel.: 8009 4409

E-Mail: [email protected]

IAN 310944

Importer

Please note that the following address is not the

service address. Please use the service address

provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21 • DE - 44867 BOCHUM

GERMANY

www.kompernass.com

PAP 20 A3 GB

│

CY

│

15 ■

Disposal

The packaging protects the device from

damage during transport. The packaging

materials have been selected for their

environmental friendliness and disposal attributes,

and are therefore recyclable.

Returning the packaging into the material cycle

conserves raw materials and reduces the amount

of waste generated. Dispose of packaging materials

that are no longer needed in accordance with

applicable local regulations.

Do not dispose of batteries in your

normal household waste!

Defective or worn-out rechargeable batteries must

be recycled according to Directive 2006/66/EC.

Take the battery pack and/or appliance to a nearby

collection facility.

Please consult your local authorities regarding

suitable disposal of worn out power tools/battery

packs.

PAP 20 A3■ 16

│

GB

│

CY

Dispose of the packaging in an

environmentally friendly manner.

Note the labelling on the packaging

and separate the packaging material

components for disposal if necessary.

The packaging material is labelled with

abbreviations (a) and numbers (b) with

the following meanings:

1–7: Plastics,

20–22: Paper and cardboard,

80–98: Composites

Your local community or municipal

authorities can provide information on

how to dispose of the worn-out product.

Pagina se încarcă ...

Parkside PAP 20 A3 Operating Instructions Manual

Parkside PAP 20 A3 Operating Instructions Manual

Lucrări conexe

Alte documente