Thermo Fisher Scientific Multidrop Pico 8 Digital Dispenser Instrucțiuni de utilizare

Marca: Thermo Fisher Scientific

Model: Multidrop Pico 8 Digital Dispenser

Tip: Instrucțiuni de utilizare

Thermo Scientific™

Multidrop™ Pico 8 Digital Dispenser

Operating Manual

Cat. no. 1509040 Rev. 01

Microsoft and Windows are registered trademarks of the Microsoft group of companies.

All other trademarks and registered trademarks are the property of their respective holders.

Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in

product operation. This document is copyright protected and any reproduction of the whole or any part of

this document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.

The contents of this document are subject to change without notice. All technical information in this

document is for reference purpose only. System configurations and specifications in this document supersede

all previous information received by the purchaser.

Thermo Fisher Scientific Inc. makes no representations that this document is complete, accurate or error-

free and assumes no responsibility and will not be liable for any errors, omissions, damage or loss that

might result from any use of this document, even if the information in the document is followed

properly.

This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This

document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions

of Sale shall govern all conflicting information between the two documents.

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual 3

About This User Manual

The following symbols and markings appear in this user manual.

Warning / Caution Risk of injury to the user. Risk of damage to the

instrument, other equipment or loss of performance or function in a

specific application.

Note Marks a tip, important information that is useful in the optimum

operation of the system, or an item of interest.

Tip Gives a helpful hint for getting the most out of the software

functionality.

Warnings and

other markings

used in the

documentation

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual 5

Contents

About This User Manual ............................................................................... 3

Warnings and other markings used in the documentation ................. 3

Introduction to the Multidrop Pico dispenser .......................................... 7

How the Multidrop Pico dispenser works ......................................... 7

Advantages of the Multidrop Pico dispenser ...................................... 8

Safety ................................................................................................................ 9

General safety rules ........................................................................... 9

Personal protective equipment .......................................................... 9

Possible inhalation hazard ................................................................. 9

Laser safety ........................................................................................ 9

Electrical safety ................................................................................ 10

Electrical emissions safety ................................................................ 10

Decontamination prior to servicing ................................................. 10

Safe disposal of cassettes and pipette tips ......................................... 11

Ergonomic safety ............................................................................. 11

Additional assistance ....................................................................... 11

System specifications ................................................................................. 12

Intended use.................................................................................... 12

Hardware ........................................................................................ 12

Environmental operating conditions ............................................... 12

Shipping and storage conditions ...................................................... 12

Compatible well plates .................................................................... 13

Additional specifications ................................................................. 13

Understanding the Multidrop Pico dispenser ........................................ 14

Hardware components .................................................................... 14

Assembly and startup ...................................................................... 14

Running a protocol ...................................................................................... 16

Run/Simulation Window layout – plate and fluid preparation ........ 16

Status area ....................................................................................... 16

Pause/Abort .................................................................................... 17

Well plate grid display ..................................................................... 17

Plate prompt and loading a plate ..................................................... 18

Loading a plate ................................................................................ 18

Cassette prompt and loading a cassette ............................................ 19

Loading a cassette ............................................................................ 20

Load fluid prompt ........................................................................... 20

Locking dispensehead cassettes ........................................................ 22

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Contents

6 Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual Thermo Fisher Scientific

Modifying load volume ................................................................... 22

Loading the fluids ........................................................................... 23

Fluid dispensing .............................................................................. 26

Plate changes ................................................................................... 26

Cassette changes .............................................................................. 26

Preventative maintenance procedures.................................................... 27

Turning off the Multidrop Pico dispenser ....................................... 27

Cleaning the Multidrop Pico dispenser ........................................... 28

Pogo pin inspection ......................................................................... 29

Pogo pin cleaning ............................................................................ 30

A1 alignment check ......................................................................... 31

Load and validate ............................................................................ 32

Fluid and Dispense ......................................................................... 32

Adjust ............................................................................................. 32

A1 realignment................................................................................ 33

Preventive maintenance completion form ........................................ 34

Legal and regulatory notices ..................................................................... 35

Chapter 6

Chapter 7

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual 7

Chapter 1

Introduction to the Multidrop Pico

dispenser

The Multidrop Pico dispenser provides fast and reliable dispensing

performance across a large dynamic range, eliminating slow, wasteful,

and error-prone manual serial dilutions and enabling assay

miniaturization through low-volume assay component addition.

The Multidrop Pico dispenser provides fast and reliable dispensing

across a wide range of life science applications:

• Dose-response curves for small molecule and biomolecule-based

drug discovery research

• Drug-drug synergy experiments for drug discovery

• Low-volume assay component dispensing of a wide range of

fluids into microplates

• Complex enzyme kinetic studies

• DMPK standards

Using single-use cassettes to help avoid the possibility of cross-

contamination, the Multidrop Pico dispenser offers non-contact digital

dispensing in the picoliter to microliter range. It combines walk-up

convenience, ready-to-run performance and flexible, intuitive

experiment design software to increase research productivity, reliability

of results, and speed of life science research.

Even the most complex experimental plate layouts, such as drug-drug

interaction (synergy) studies, can be made simple. Titrating one drug

down the plate while another is titrated orthogonally across the plate

enables two or more drug doses to be independently generated in every

well. In addition, plate layouts can be randomized to reduce the impact

of edge effects, increasing the integrity of the experimental data. The

Multidrop Pico dispenser offers a convenient solution to address the

most challenging experiments.

The Multidrop Pico dispenser offers non-contact digital dispensing

utilizing single-use cassettes to avoid contamination in picoliter to

microliter range. It increases research productivity by reliable results

provided at higher speed using flexible and intuitive experiment design

software

How the

Multidrop Pico

dispenser works

Introduction to the Multidrop Pico dispenser

Advantages of the Multidrop Pico dispenser

8 Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual Thermo Fisher Scientific

Even the most complex experimental plate layouts, such as drug-drug

interaction (synergy) studies, can be made simple. Titrating one drug

down the plate while another is titrated orthogonally across the plate

enables two or more drug dose combinations to be independently

generated directly in each well.

The Multidrop Pico dispenser adds breakthrough capability to life

science research workflows by offering picoliter-to-microliter non-

contact dispensing directly into assay plates.

• High-Performance Digital Dispensing: Reliably dispense drop-

by-drop from low picoliters to microliters in seconds. Easily

complete set-ups even for the most complex experiments such as

drug-drug co-titration or enzyme kinetic studies in minutes.

Achieve excellent data resolution (0.02 Log Increments).

Capable of digitally randomized plate layouts to reduce edge

effects and increase data integrity.

• Resource Savings: Eliminate slow, error prone, wasteful manual

serial-dilution steps. Optimize the use of precious materials and

research time. Avoid ergonomic injuries and rework associated

with repetitive hand pipetting processes.

• Ease of Use: Enjoy a simple, intuitive user experience with

quick do-it-yourself experiment design software. Use the

Enzyme Profile Wizard to aid in designing complex enzyme

kinetic experiments Boost productivity with walk-up, just-in-

time bench top convenience. Avoid carry-over and

contamination with single use, non-contact dispensing supplies.

The Multidrop Pico dispenser is applicable to many low-

volume assay procedures with one system.

Advantages of

the

Multidrop

Pico dispenser

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual 9

Chapter 2

Safety

The Multidrop Pico dispenser should be used in accordance with all

applicable safety rules that are in effect in the lab in which it is installed.

Use of the Multidrop Pico dispenser should also follow common-sense

safety guidelines for chemical, mechanical, and electrical safety.

Note If this unit requires servicing, or you are unsure about any aspect

of operation or safety, contact the Service Help Desk. The contact

information can be found in the Multidrop Pico dispenser

Service and

Support

document.

Caution Do not remove any of the Multidrop Pico dispenser covers.

Contact your Service Help Desk if the Multidrop Pico dispenser is not

working properly. Do not attempt to repair the Multidrop Pico

dispenser yourself.

• Place the Multidrop Pico dispenser on a work surface that

supports all four feet securely.

• Plug the Multidrop Pico dispenser into a standard, grounded,

electrical outlet. Note the power requirement listed on the back

label of the Multidrop Pico dispenser.

• Avoid the moving parts of the Multidrop Pico dispenser during

operation.

The safety precautions and personal protective equipment (PPE)

specified by your employer for chemicals used and fluid transfer

operations and disposal should be used when operating the Multidrop

Pico dispenser and handling these materials.

The Multidrop Pico dispenser was designed with chemical safety in

mind; however, it does dispense picoliter droplets of fluid and generates

a small amount (less than 1 %) by volume, of very small aerosol

droplets that might not be trapped within the well plate that you are

dispensing into. If the fluids are known or suspected to be an inhalation

or contact hazard, use the Multidrop Pico dispenser in an enclosure,

with an exhaust, such as a lab fume hood.

A Class 1 laser is used in the Multidrop Pico dispenser to determine the

height of the destination plate. This Class 1 Laser follows the

requirements of Laser Notice No. 50 of the FDA (CDRH), Accession

General safety

rules

Personal

protective

equipment

Possible

inhalation

hazard

Laser safety

Safety

10 Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual Thermo Fisher Scientific

No. 1520094-000. This product complies with 21 CFR Part 1040.10

for laser products.

Warning Do not look at the laser beam directly. Similarly, do not

continue to look at laser light reflected on a highly reflective substance

for a long duration.

The Multidrop Pico dispenser is TUV certified for the CE mark

signifying compliance with applicable electrical regulations in the

regions where the product is sold. Electrical specifications of the

Multidrop Pico dispenser: voltage 100-240V AC, 1 phase/3 wire, 50/60

Hertz, 2.6A full load amperage.

Caution Do not touch the static eliminator electrode probe located

under the cover guard. Even if device power is off, directly touching the

probe may result in personal injury, electrical shock, or malfunction.

The Multidrop Pico dispenser has passed an FCC/EMC test for

electrical emissions safety. This device complies with part 15 of the

FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

Any changes or modifications to this equipment not expressly approved

by Thermo Fisher Scientific may cause harmful interference, and it

would void your warranty.

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case users will be required

to correct the interference at their own expense. This Class A digital

apparatus also complies with Canadian ICES -003.

Service personnel may require you to certify that appropriate cleaning,

decontamination, and other abatement of potential threats to service

personnel have been performed prior to shipping the Multidrop Pico

dispenser for servicing.Recommended cleaning and decontamination

procedures are described in the Cleaning the Multidrop Pico dispenser

section.

Electrical safety

Electrical

emissions safety

Decontamination

prior to servicing

Safety

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual 11

Disposal of used pipette tips and cassettes should be performed in

accordance with your company’s chemical waste procedures. The

DHCs do not require any special disposal procedures except for those

required for the chemicals, which have been placed in them, by your

laboratory.

The Multidrop Pico dispenser typically requires a single manual

pipetting operation for each dispensed compound. In most situations,

using the Multidrop Pico dispenser in the intended manner decreases

the frequency of shoulder, arm, and wrist motions and so decreases the

stress on these joints compared to traditional methods.

To minimize ergonomic risks associated with the use of the Multidrop

Pico dispenser, consider the following work area design ideas:

• Place the Multidrop Pico dispenser on a work bench at a height

that allows for proper visual and physical access for operators.

Having the Multidrop Pico dispenser too high can lead to

greater shoulder elevation when pipetting into the cassette and

having the Multidrop Pico dispenser too low can lead to

increased neck and back flexion.

• If an operator is too short to comfortably access the Multidrop

Pico dispenser, consider moving the Multidrop Pico dispenser

to a lower bench height. Alternatively, use a footstool or high

lab stool that adjusts to the proper work height.

• Place the Multidrop Pico dispenser close to the front of the

work surface to minimize the distance the operator must reach

to pipette into the cassette.

• Place the pipette tip disposal receptacle close to the Multidrop

Pico dispenser.

• Place the computer keyboard close to the Multidrop Pico

dispenser to minimize reach distance.

• Adjust the computer monitor height and screen angle for good

physical and visual access during Multidrop Pico dispenser

operation.

• Perform data analysis at a separate ergonomically designed

workstation whenever possible rather than at the Multidrop

Pico dispenser computer.

Contact the Service Help Desk for additional assistance. The contact

information can be found in the Multidrop Pico dispenser

Service and

Support

document.

Safe disposal of

cassettes

and

pipette tips

Ergonomic

safety

Additional

assistance

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual 12

Chapter 3

System specifications

The Multidrop Pico dispenser and cassettes are intended only for the

following uses, wherein all three conditions must be met:

• Dispensing of DMSO solvent or water containing surfactant

with or without small molecule compounds or biomolecule(s).

• For general laboratory use.

• Single-usage (i.e., non-reusable) operation of a cassette.

In addition to the requirement of Intended Use, the products should

not be used for any of the following: (a) applications in Bio Safety Level

3 or 4 (BSL-3 or-4), food, animal or human testing or therapeutic

delivery (except solely for therapeutic delivery for in vitro research uses)

(b) dispensing cells, biofluids (unless otherwise specified on product

packaging), bacteria, viruses, pathogens, contagions, infectious agents,

toxins, oncogenes, or radioactive substances; and (c) in uses that are

unsafe, bypassing any product safety features, and/or disobeying any

safety instruction.

• Dimensions of Multidrop Pico dispenser (W x D x H): 47 cm x

37 cm x 23 cm

• Grounded electrical outlet

• 100-240V

• USB port

• Temperature: 20°C - 30°C laboratory conditions (68 - 86°F)

• Humidity: 30% - 80% RH

• Temperature: 10°C - 32°C (50°F – 90°F)

• Humidity: 20% - 80% RH

Intended use

Hardware

Environmental

operating

conditions

Shipping and

storage

conditions

System specifications

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual 13

Well plates that meet the following criteria are compatible with the

Multidrop Pico dispenser.

• One of the following types: 12, 24, 48, 96, 384, 1536 well

format.

• Meet ANSI specifications for footprint dimensions and well

locations, if applicable.

• Between 6 mm and 47 mm in height.

See the Multidrop Pico dispenser

Software User Guide

for more system

specifications.

Compatible well

plates

Additional

specifications

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual 14

Chapter 4

Understanding the Multidrop Pico

dispenser

1. Cassette

2. Pogo block

3. Source plate holder

4. Motorized stage and destination plate holder

5. Destination plate

6. Deck

7. Power switch and indicator light

8. Power and USB connections

9. PC with Multidrop Pico dispenser software

The Multidrop Pico dispenser runs on standard AC power, between

100-240V.

Warning Be sure the Multidrop Pico dispenser power requirements

match your outlet voltage. The voltage requirement is shown on the

power supply label. Do NOT plug the power supply into the incorrect

voltage. If the labeled voltage on the power supply does not match your

standard outlet, contact the Service Help Desk. The contact

Hardware

components

Assembly and

startup

Understanding the Multidrop Pico dispenser

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual 15

information can be found in the Multidrop Pico dispenser

Service and

Support

document.

An electrical outlet is required for the computer Multidrop Pico

dispenser. A dedicated circuit is not required as the Multidrop Pico

dispenser draws less than two amps.

The Multidrop Pico dispenser requires a level bench space which is at

least 47 cm (18 inches) wide, 40 cm (16 inches) deep, and 23 cm (9

inches) high. This does not include space for the required computer.

Warning Do not place items heavier than 2.5 kg (5 lbs) on the top

surface of the Multidrop Pico dispenser.

• Unpack the Multidrop Pico dispenser and remove the four

pieces of the shipping bracket.

• Connect the power cord (packaged separately) to the back of

the Multidrop Pico dispenser.

• Plug the other end of the power cord into the appropriate

power outlet.

• Turn the Multidrop Pico dispenser on by depressing the main

power switch on the front of the Multidrop Pico dispenser.

• The power switch will illuminate and the pogo block LEDs will

flash, indicating the beginning of the Multidrop Pico dispenser

initialization routine.

• Use the USB cable that came with the Multidrop Pico dispenser

to connect the computer to the Multidrop Pico dispenser. The USB

port is on the back of the Multidrop Pico dispenser.

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense 16

Chapter 5

Running a protocol

Refer to the Multidrop Pico dispenser

Software User Guide

for

information about initiating and completing a protocol run.

In this phase of the run, you load the plate, cassette, and fluids as

prompted.

Initially, you will be prompted for both plate and cassette load. Plate

and cassette load regions will be displayed as needed during the run.

In simulation mode the Simulation Speed bar is displayed. Use the bar

to adjust the progress speed of the dynamic display of fluids as they are

being dispensed. You can adjust the simulation speed at any time

during the simulated run.

Fluid dispensing begins when the plate and cassette are loaded and one

of the fluid reservoirs has been filled for dispensing.

The upper portion shows a “status” display area, indicating Waiting on

Operator for plate and fluid preparation. There is also a progress circle

that lets you know how far along the protocol run is.

Run/Simulation

Window layout

–

plate and fluid

preparation

Status area

Running a protocol

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual 17

Additionally, a Pause/Abort button is available for the balance of the

run. If you want to quit the run, you must click this button to leave the

run before completion – you cannot exit by clicking the X in the upper

right corner of the window.

Note A run can be paused by either using the Pause/Abort button or

staying in the Waiting on operator state. Pausing for long periods

during a run is not recommended. If the USB connection to the

Multidrop Pico dispenser is lost, the protocol cannot be resumed.

Various PC settings can influence how quickly an idle PC will

disconnect from hardware.

Click Pause/Abort to pause or abort the run while dispensing is

occurring. After you click Pause/Abort, click Resume to proceed with

the just-paused run (below left) or Abort to terminate it.

When appropriate, additional options will be offered.

Show Plate will move the plate to where it can be examined by the

operator. Resume will return the plate to the dispense area and continue

dispensing.

Cancel Fluids allows un-dispensed fluid to be re-planned using a new

cassette. This may be used if an incorrect fluid has been loaded into the

cassette.

Warning status messages may be displayed for both Show Plate and

Cancel Fluids.

The current plate is displayed in the Well plate grid. However, the tools

and functions of the Main Operating Window are not available.

Nevertheless, you can move your cursor over the wells on the monitor

screen to see the well summary information. Once dispensing begins

the Well plate grid shows the dispense progress as fluids are dispensed

into the wells.

Pause/Abort

Well plate grid

display

Running a protocol

18 Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual Thermo Fisher Scientific

This box prompts you to load the plate and then click Loaded (or F6)

once you have done so.

Note If the plate load sequence is not strictly sequential, Note plate

number messages will be displayed as a reminder to load the correct

plate.

If the plate has an identification code you want to track, scan the bar

code on the plate using a USB bar code reader attached to your

computer, or enter its identification number manually into the Plate ID

(optional) field.

Note If Require and validate plate ID option has been selected in

Run Settings, you must enter a Plate ID and re-enter that ID each time

the plate is re-loaded so it can be validated.

Place the well plate on the plate holder. Ensure the plate sits within the

metal guides on all sides. The plate clamp at the top left of the holder

will close automatically when the plate moves from the “load” position.

• Make sure the plate is completely level and down on the

destination plate holder.

• Ensure that the A1 well position (upper-left-most well in the

grid) is at the top-left corner of the destination plate holder.

Plate prompt and

loading a plate

Loading a plate

Running a protocol

Thermo Fisher Scientific Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual 19

Click Loaded (or F6) to proceed.

When a cassette is required, a Cassette Load prompt is displayed,

indicating the type of cassette required.

Cassette prompt

and loading a

cassette

Running a protocol

20 Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense Operating Manual Thermo Fisher Scientific

When prompted, load a cassette as shown.

• If a used cassette is in the Multidrop Pico dispenser, lift the tab

and pull the cassette out of the deck.

• Lift a new cassette out of the clamshell container and place it

into the cutout on the Multidrop Pico dispenser deck.

• Make sure the cassette is fully inserted so that the top surface is

the same height as the top of the deck all the way around the cassette.

Once you have confirmed that the cassette has been loaded, click

Loaded (or F3).

Note If the cassette has an identification code you would like to track,

scan or enter its identification number manually into the Cassette ID

(optional) field.

If the cassette was used in a previous run, the used dispenseheads will be

marked as unavailable.

A blue LED illuminates the first available dispensehead.

After the cassette has been loaded, the Load Fluid prompt will appear.

The prompt has an entry for fluids used in the protocol, color-coded

and number-coded (in concert with the numbered cassette reservoirs)

with stock concentration and the required load volume.

Loading a

cassette

Load fluid

prompt

Pagina se încarcă ...

Thermo Fisher Scientific Multidrop Pico 8 Digital Dispenser Instrucțiuni de utilizare

Marca: Thermo Fisher Scientific

Model: Multidrop Pico 8 Digital Dispenser

Tip: Instrucțiuni de utilizare

Descărcați PDF

raport

Thermo Fisher Scientific Multidrop Pico 8 Digital Dispenser Instrucțiuni de utilizare

Thermo Fisher Scientific Multidrop Pico 8 Digital Dispenser Instrucțiuni de utilizare

în alte limbi

Lucrări conexe

Alte documente