Canyon SW-78 Black Salt Smartwatch Manualul utilizatorului

QUICK GUIDE v1

Smartwatch

«Black Salt», «Pink Salt»

SW-78

INTRODUCTION

Dear customer, thank you for choosing SW-78 Salt!

In the model range of all wearable smart devices

by Canyon, SW-78 Salt takes a very special place,

because this is our rst model powered with 2 Blue-

tooth chips on board. Thanks to this enhancement,

we now have 2 types of music player options where

you are free to choose how to listen to your favorite

songs – by controlling the smartphone’s music player

or play the music directly from the watch! And now

you can do your favourite sports activities, listen to

music and no need to worry where to put your smart-

phone - with SW-78 Salt you don’t need a smart-

phone to playback music at all! We have achieved a

perfect balance of software and hardware to guaran-

tee that the battery will be enough to use the music

player, monitor your daily activities, play sports and

get notications from your smartphone for a very

long time on one charge of the battery!

EN

DEVICE SPECIFICATION:

Model: Black Salt SW-78, Pink Salt SW-78

Chip: Nordic 52832, Action 2831

Memory: RAM 64KB, ROM 512KB, Flash 512 Mb

Screen: 1.4" 240*240px fulltouch IPS screen,

single touch

Battery: non-removable Li-Polymer 3.7V 200mAh

Connection type: Bluetooth 4.2

Music player audio formats support: MP3, WMA,

AAC, M4A, APE, FLAC, WAV

Working temperature: -10°C to +45°C

Working humidity: 0% to 80%

Waterproof: IP68

Standby time: up to 12 days

Operation time: up to 5 days

BT music play time: up to 5 hrs

Charging cable type: USB Type A adapter cable

Size: body 42.8mm*36.8mm*10.7 mm, belt

20mm*205mm

Weight: 45g

This device is not intended for children under

6 years old

EN

OVERVIEW.

1. Touch Screen

2. Function button

3. Heart rate sensor

4. Charging pins

Complete set

• Smartwatch

• Charging cable

• User manual

1

2

4

3

EN

GENERAL USAGE INSTRUCTIONS

Make sure that your smartwatch is fully charged

before using. If you use a power adaptor (not

included), power adaptor voltage limit is: 5V, 1A

(5V 500mA adaptor recommended). It takes up to 2

hours to be fully charged.

1. Make sure the charging pins on the charging

cable t correctly onto the charging terminals on the

back of the smartwatch, as shown in gure 1:

Figure 1.

EN

2. Plug the USB-cable to a power source. For better

charging compatibility, it is advisable to use a Power

Bank or wall charger produced by Canyon. Do not

use a fast charging device as it could result in a

short circuit and risk of re.

Connecting to a smartphone: charge the smartwatch,

turn it on, activate Bluetooth on your smartphone,

download and install the Canyon smartwatch application

Canyon Life by scanning the QR code below.

Open Canyon Life app-> “Bluetooth

Devices”->”Start”-> choose your

watch from the Pair Device list

(SW78) -> press ”ADD DEVICE”

and you will see Device success-

fully connected. Use the app to

apply the settings you need, for

example you can: turn on sedentary

reminder, select apps that you want

to receive notications from, etc.

Unpair smartwatch from mobile phone:

1. Open “Canyon Life” on your smartphone

2. Open “Setup - Bluetooth devices” and click

“Unpair device.

3. Click “OK” to conrm

HOW TO USE

• Turn on: press and hold the function button for 3

seconds

• Turn off: press and hold the function button for 3

seconds, then press Conrm icon

EN

• Go to the main menu: swipe up on watch face

interface

• Switch main menu interface: swipe up/down

• Select item: tap the icon

• Return to the watch face interface: briey press

the function button on any interface

• Check activity results: swipe left from main

menu interface

• Open music player: swipe right on watch face

interface

• Open shortcut: swipe down on watch face

interface

MAIN MENU

After switching on the

smartwatch, you will see the

watch face interface.

EN

From watch face:

Swipe up to enter the main menu pages.

Click the icon to select the corresponding menu

function. Slide from left to right to return to the

previous menu.

Heart rate

Tap to the icon to measure your heart

rate. Press start to start measurement.

Check the result and statistics on

the HR screen. After sync with

Canyon Life app, you can check

your heart rate data on your

smartphone.

EN

Oxygenation

Tap the icon to measure your oxyge-

nation.

Press start to begin measurement.

Check the result on the SPO2

screen.

Sport

Click on the sports icon to enter the

training interface.

EN

There are 11 sport modes: walking, treadmill,

running, hiking, cycling, swimming, basketball,

football, badminton, skipping and yoga. You can

select the desired mode, and then start the selected

exercise; the smartwatch will record the exercise

data. At the same time, you can use the Bluetooth

music function to connect to the Bluetooth headset

to play music during exercise. Tap this icon to go

to music player screen.

When you want to end the sport, swipe the screen

from left to right, then click the Stop icon to stop

your sport and save it. After synchronizing with

Canyon Life app, you can view your sport data.

PS: If the sport time is less than 2 minutes, the

distance is less than 0.1 kilometer, and the calorie

value is less than 1, the data will not be saved.

Music player

SW-78 has 2 types of music player:

1) Phone music player. This function allows you to

control your smartphone’s music player

EN

2) Watch music player. Play music

from internal memory to any

external Bluetooth devices (TWS,

speaker, etc)

Click the icon to select the

music player type.

Phone music player

“Phone” type allows you to control your smart-

phone’s music player. You can start/stop the music,

switch tracks.

Notes: Your smartwatch should be paired to the

smartphone; music player should be activated on

the smartphone before use.

Watch music player

EN

“Watch” type allows you to playback audio les from

internal watch memory to any BT audio device.

For proper use of this function, please follow these

steps:

1) Tap to open BT connecting menu

2) After searching choose and select the BT device

that you want to pair . To choose another BT device,

tap “Unpair” and select a device from the list one

more time. Tap “search” to refresh the list of visible

devices.

3) Go back to the main player screen to select an

audio le. Select the icon below to open the le

manager and select audio les.

EN

Put the watch on the charger, connect the USB

to the computer, the computer will recognize your

watch as an external drive, copy the required songs

to the external drive. Please note: the built-in les

cannot be and should not be deleted.

Supports MP3, WMA, AAC, M4A, APE, FLAC,

WAV audio format les.

4) Select audio le to start playback

5) Use these buttons to start/stop music and switch

tracks

6) Tap this icon to choose playback tracks mode

(shufe or direct)

7) Tap this icon to control the volume

8) Tap this icon to close the BT connection,

remove pairing or to switch to the “Phone player”

Weather forecast

Click on the weather icon to enter the

weather main screen. Swipe down to see

the forecast for

next few days.

EN

Breathing training

Click on the breath icon

to enter the breathing

training to calm down

and restore your

breathing patterns. Click “Start” to

start training. Inhales and exhale,

follow the command on the screen.

Camera control

(shutter)

Click on the shutter

icon to activate the

camera of your smartphone.

Tap the screen to make a remote

photo. Note: Your smartwatch

should be paired with the smartphone and the take

photo screen in the Canyon Life App should be

opened for using this function.

Notications

(messages)

Click the notications

icon to go to the noti-

cation menu

If there are no messages, it will

show as in the screen below. In

the Canyon life App you may set

up a list of applications that will show notications.

EN

Tap the notication to see detailed information.

Stopwatch

Click the stopwatch

icon to go to the stop-

watch function.

Timer

Click the timer icon to go to the timer

function. You can set the timer and then

start timer countdown.

Settings

Click the settings icon to go to the settings menu

Here you can switch off vibration alerts, set up the

brightness level, restart or turn off the device and

check technical information (rmware version, BT

name and mac address).

EN

Brightness

Click the icon to adjust the display

brightness.

Vibrating icon

Click the icon to switch vibration on/off.

WATCH FACE

You can press and hold on the main screen to

change the watch face theme. Swipe left or right to

change theme, click on screen to apply.

SHORTCUT

Swipe down from watch face to

enter the shortcut menu.

EN

Theater mode

Click the icon to activate the Theater

mode – switch off vibration and reduce

brightness.

Flashlight

Click the icon to activate ashlight mode –

screen will turn white with maximum bright-

ness level. Swipe left to right to exit.

Weather

Click the icon to go to the weather

interface.

Settings

Click the icon to open the settings

interface.

DAILY ACTIVITIES

Swipe left from watch face to enter the daily activi-

ties menu. First screen shows total exercises time

and burned calories for the current day. Swipe left

one more time to check detailed activities statistics

for the current day.

EN

Same information you may see using this WF

After sync with Canyon Life app, you can check

your statistics on your smartphone.

Also, you may set up a daily activity target in the

App. After reaching this target, you will get the

following notication

EN

SLEEP MONITOR

Swipe left from Daily activities to

enter the sleep monitoring screen.

The smartwatch will monitor your

sleep automatically.

When you wake up the smart-

watch will show the sleep report

with the time of total sleep, light

sleep, deep sleep times and the

target percentage of sleep time.

After sync with Canyon Life app, you can check a

more detailed sleep report in your smartphone.

ADDITIONAL FUNCTIONS

Rejection of incoming call

Tap “Hang up” icon while incoming

call to reject it. Tap “Ignore” icon to

hide notication.

Water balance reminder

Activate this function in Canyon

Life app to get this notication on

the watch. When it’s time to drink

water, watch will remind you.

EN

Sedentary reminder

Activate this function in Canyon

Life app to get this notication on

the watch. When it’s time to move

or warm-up, watch will remind you.

TROUBLESHOOTING

Problem Solution

Your smart-

watch doesn’t

turn on

Connect your watch via a USB

connector to a USB port or a

socket adapter and wait for a

few seconds.

Your smart-

watch isn’t

detected by a

smartphone

Make sure that Bluetooth and

GPS high accuracy are active

on your smartphone. Make

sure the watch is not con-

nected to another smartphone.

Your smart-

watch is

detected by a

smartphone,

but fails to

connect

Turn the smartwatch off and

then turn it back on. Turn Blu-

etooth and off on your phone.

Reboot your phone.

Pagina se încarcă ...

Canyon SW-78 Black Salt Smartwatch Manualul utilizatorului

Canyon SW-78 Black Salt Smartwatch Manualul utilizatorului

în alte limbi

Lucrări conexe

Alte documente