Philips FC8822/01 Manual de utilizare

FC8822, FC8812

FC8822

Wheels stuck

ݓઁहሂ

Top cover or dust container not placed properly

רۆࠋࠦӧ๥໇٦ݾ

Bumper stuck

ߓԎሑᇆहሂ

Robot lifted up from oor

՚ֽϴุఓਘᇊୃስײᆋ०༏ӧచ

Colour of oor too dark

ֽϴဂ೨ขτ

Battery not inserted properly / Charging error (switch is o)

׌ԁ໇ሑݾԍ׌մ༆Ĳऻܵၜܵтĳ

5

6

4

3

2

1

7

8

9

10

17

20

19

18

22

23

21

25

24

26

16

15

13

14

11

12

-

English 6

Čeština 29

Magyar 52

Română 76

Slovensky 101

Русский 124

Українська 149

Қазақша 173

English

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit

from the support that Philips offers, register your product at

www.philips.com/welcome.

General description

1 Handle of dust container lid

2 Dust container lid

3 Filter

4 Dust container

5 Top cover

6 Error codes table

7 Fan

8 Bumper

9 Docking station sensor

10 Power switch

11 Front wheel

12 Side brush shafts

13 Drop-off sensors

14 Wheels

15 Suction opening

16 TriActive XL nozzle

17 Side brushes

18 Fixation blocks for dry wipes

19 Dry wipe holder

20 Dry wipes

21 Battery holder

22 Remote control

23 Invisible wall (FC8822)

24 Docking station

25 Adapter

26 Small plug

Display and remote control

Display of robot

1

1110 129

2

3

4

5 6 7 8

1 Spiral mode indicator

2 Wall-following mode indicator

3 Zigzag pattern mode indicator

4 Random mode indicator

5 Cleaning time

6 Docking icon

7 Fan speed indicator

8 Dustbin full indicator

9 Sound sensor

10 Mode selection button

11 Start/stop button

12 Fan speed button

6

English

Remote control

2

1

3

45

1 Navigation buttons and start/stop

2 Cleaning time buttons

3 Cleaning mode buttons

4 Fan speed buttons

5 Docking button

Control panel of docking station

1

2

1 Display with time, day and programming indications

2 Adjusting and setting buttons

How your robot works

What your robot cleans

This robot is equipped with features that make it a suitable cleaner to help

you clean the floors in your home.

The robot is especially suitable for cleaning hard floors, such as wooden,

tiled or linoleum floors. It may experience problems cleaning soft floors,

such as carpet or rugs. If you use the robot on a carpet or rug, please stay

close by the first time to see if the robot can deal with this type of floor. The

robot also needs supervision when you use it on very dark or shiny hard

floors.

How your robot cleans

Cleaning system

The robot has a 3-stage cleaning system to clean your floors efficiently.

7

English

-

The two side brushes help the robot clean in corners and along walls.

They also help to remove dirt from the floor and move it towards the

suction opening.

-

The suction power of the robot picks up loose dirt and transports it

through the suction opening into the dust container.

-

The robot comes with a dry wipe holder that allows you to clean your

hard floor even more thoroughly with dry wipes.

Cleaning patterns

In its auto cleaning mode, the robot uses an automatic sequence of cleaning

patterns to clean each area of the room optimally. The cleaning patterns it

uses are:

1 Z-pattern or zigzag pattern

2 Random pattern

3 Wall-following pattern

8

English

4 Spiral pattern

In its auto cleaning mode, the robot uses these patterns in a fixed

sequence:z-pattern, random pattern, wall-following pattern, and spiral

pattern.

When the robot has completed this sequence of patterns, it starts moving in

Z-pattern again. The robot continues to use this sequence of patterns to

clean the room until the rechargeable battery runs low, or until it is switched

off manually.

If the robot detects a particularly dirty area during its cleaning run, it

switches to spiral mode and switches to turbo fan speed to ensure thorough

dirt removal.

Note: You can also select each mode individually by pressing the

appropriate button on the remote control. The manually selected modes are

only active for a couple of minutes. After that, the robot switches back to

auto-cleaning mode.

For more details, see chapter 'Using your robot', section 'Cleaning modes'.

How your robot avoids height differences

The robot has three drop-off sensors in its bottom. It uses these drop-off

sensors to detect and avoid height differences such as staircases.

Note: It is normal for the robot to move slightly over the edge of a height

difference, as its front drop-off sensor is located behind the bumper.

Caution: In some cases, the drop-off sensors may not detect a staircase or

other height difference in time. Therefore monitor the robot carefully the

first few times you use it, and when you operate it near a staircase or

another height difference. It is important that you clean the drop-off

sensors regularly to ensure the robot continues to detect height

differences properly (see chapter ' Cleaning and maintenance' for

instructions).

Before first use

Mounting the side brushes

1 Unpack the side brushes and place the robot upside down on a table or

on the floor.

9

English

2 Push the side brushes onto the shafts on the bottom of the robot.

Note: Make sure you attach the side brushes properly. Press them onto

the shaft until you hear them lock into position with a click.

Removing the tag from the remote control

The remote control works on a CR2025 coin-shaped battery. This battery is

protected with a protection tag that has to be removed before use.

1 Pull the battery protection tag out of the battery compartment of the

remote control. Now the remote control is ready for use.

Preparing for use

Installing the docking station

1

2

1 Insert the small plug of the adapter into the socket on the docking station

(1) and insert the adapter into the wall socket (2).

-

The display of the docking station comes on.

2 Place the docking station on a horizontal, level floor against the wall.

100

100 cm

30 30

30 cm

80

80 cm

Note: Make sure that there are no obstacles or height differences 80 cm

in front, 30 cm to the right and 100 cm to the left of the docking station.

Tip: To ensure the docking station stays firmly in the selected spot, fasten

it to the wall with screws or with two strips of double-sided tape.

10

English

Charging

When charging for the first time and when the rechargeable battery of the

robot is empty, the charging time is four hours.

Your robot can be charged in two ways:

-

On the docking station, either manually or automatically during use;

-

By connecting the robot directly to the mains.

Note: When the rechargeable battery is fully charged, your robot can clean

for up to 120 minutes

Charging on the docking station

1 Press the power switch to switch on the robot.

2 Place the robot on the plugged-in docking station.

3 The start/stop button starts flashing.

Note: Because this is the first time you charge the robot, the display of

the robot shows the booting indicator.

4 When the rechargeable battery is fully charged, the start/stop button

lights up continuously.

11

English

1 When the robot has finished cleaning or when only 15% of the battery

power remains, it automatically searches for the docking station to

recharge. When the robot searches for the docking station, the light in the

start/stop button turns orange.

2 When the rechargeable battery is fully charged, the start/stop button

lights up continuously.

Preparing the room for a cleaning run

Before you start the robot on its cleaning run, make sure that you remove all

loose and fragile objects from the floor. Also remove all cables, wires and

cords from the floor.

Using your robot

Starting and stopping

1 Set the power switch on the side of the robot to the 'on' position.

2 Press the start/stop button.

-

You can press the start/stop button on the robot.

-

You can also press the start/stop button on the remote control.

3 The start/stop button is continuously on and the robot starts cleaning.

12

English

Charging automatically during use

4 The robot cleans in the auto-cleaning mode until its battery runs low. In

the auto-cleaning mode, it follows repeated sequences of Z-pattern,

random, wall-following and spiral patterns.

Note: To select an individual mode, press one of the mode buttons on

the remote control. See section 'Cleaning mode selection' for more

details.

5 When the battery runs low, the start/stop button turns orange and the

robot searches for the docking station to recharge.

6 You can also press the start/stop button to interrupt or stop the cleaning

run. If you press the start/stop button again and there is still enough

energy in the rechargeable battery, the robot continues cleaning in the

auto-cleaning mode.

7 To make the robot return to the docking station before the rechargeable

battery runs low, press the docking button on the remote control. The

docking icon on the display of the robot comes on and the robot returns

to the docking station.

Cleaning mode selection

Next to the auto-cleaning mode, this robot has four individual cleaning

modes that can each be activated by pressing the appropriate button on the

remote control.

Note: The manually selected modes are only active for a couple of minutes.

After that, the robot switches back to auto-cleaning mode.

Z-pattern mode

In Z-pattern mode, the robot cleans by making Z-shaped loops through the

room to clean large areas.

13

English

In this mode, the robot cleans the room in a mixed pattern of straight and

crisscross movements.

In this mode, the robot follows the walls of the room to give the area

alongside the

walls an extra clean.

In this mode, the robot moves in a spiral pattern to clean a small area. If the

dust detection sensor detects dirt, the robot automatically switches the fan

to turbo speed.

Manual driving

1 Use the arrow buttons above and below and to the left and right of the

start/stop button on the remote control to navigate the robot through the

room.

Note: Be careful when you drive the robot manually close to height

differences and staircases.

Note: The vacuuming function and the side brushes only work when the

robot is driven forward. The left, right or back buttons are only for

maneuvering the robot.

14

English

Spiral mode

Wall-following mode

Random mode

Using the cleaning time buttons

-

By default, the robot cleans in auto cleaning mode until its rechargeable

battery runs low. The robot will then automatically return to its docking

station. If you selected one of the other cleaning times (see below), you

can switch back to the default mode by pressing the maximum cleaning

time button on the remote control.

-

The other cleaning time buttons on the remote control allow you to let

the robot operate for 60, 45 and 30 minutes respectively. When the

cleaning time is finished, the robot returns to its docking station. The

docking icon will light up on the display.

-

If you do not want the robot to return to the docking station at the end of

the cleaning time, press the cleaning time button twice. The docking icon

disappears from the display. When the cleaning time is finished, the robot

stops.

Operating the docking station

Setting clock time and day

If you want to use cleaning programs, you have to set the clock time and the

day of the week on the display of the docking station first.

Note: For the pictures that belong to the steps below, see the pages at the

back of this manual.

1 Press the set button. The set mode indicator and the clock time indicator

start flashing.

2 Press the select button once. The hour indication starts flashing.

3 Use the + and - buttons on the docking station to set the hour.The set

hour appears on the display.

4 Press the select button to confirm the hour set. The minutes indication

starts flashing.

5 Use the + and - buttons on the docking station to set the minutes. The set

minutes appear on the display.

6 Press the select button to confirm the minutes set. The indication 'Su’ for

Sunday starts flashing.

7 Use the + and - buttons on the docking station to set the current day of

the week.

8 Press the select button to confirm the day of the week.

9 Press the set button to confirm the clock time and day of the week

setting. Both the set mode indicator and the clock time indicator stop

flashing and turn solid.

15

English

Note: For the pictures that belong to the steps below, see the pages at the

back of this manual.

The programming options available are:

Program Indications on display

Cleaning every day All day indications are on

Cleaning on weekdays Mo to Fri indications are on

Cleaning on 2 consecutive days Indications of 2 days are on, e.g. Fri and Sa

Cleaning 1 day a week Indication of selected day is on

1 Press the set button. The set mode indicator and the cleaning program

indicator start flashing.

2 Press the select button once. The hour indication starts flashing.

3 Use the + and - buttons on the docking station to set the hour. The set

hour appears on the display.

4 Press the select button to confirm the hour set. The minutes indication

starts flashing.

5 Use the + and - buttons on the docking station to set the minutes. The set

minutes appear on the display.

6 Press the select button to confirm the minutes set. The indication ‘Su’ for

Sunday starts flashing.

7 Use the + and - buttons on the docking station to toggle between

cleaning programs (see the table above for the programming options

available).

8 Press the select button to confirm the program selected.

9 Press the set button to confirm the programming. Both the set mode

indicator and the cleaning program indicator stop flashing and turn solid.

10 When you have set a cleaning program, the display shows the cleaning

program indicator and the day or days selected. If you leave the robot on

standby and its rechargeable battery is fully charged, it will start cleaning

at the programmed time on the programmed day or days.

Fan speed buttons

You can use the fan speed buttons to increase the fan speed to turbo or to

switch off the fan. The default setting is normal fan speed.

1

2

3

1 Press this button to switch off the fan

2 Press this button to switch on the fan at normal speed.

3 The turbo fan button increases the fan speed.

16

English

Programming cleaning times

If you have set the time and the day of the week on the display of the

docking station, you can program cleaning times for your robot.

Using the dry wipe attachment

The dry wipe attachment is a feature that allows you to clean hard floors

with dry wipes.

Note: If you use the dry wipe attachment, the robot may have trouble

crossing thresholds or climbing onto rugs.

Preparing the dry wipe attachment for use

1 Turn the robot upside down and place it on the floor or on a table.

2 Place the dry wipe on a table and place the dry wipe attachment on the

wipe with its fixation lugs pointing towards you.

3 Fold both ends of the dry wipe around the dry wipe attachment and

fasten the dry wipe onto the attachment by pushing the fixation blocks

into the recesses.

4 Insert the fixation lug of the dry wipe attachment into the opening just

behind the wheel on one side of the robot and push until you hear it lock

into place with a click. Then repeat these actions on the other side.

5 Turn the robot and place it on the floor on its wheels with the dry wipe

attachment touching the floor.

17

English

Clap response

The clap response is enabled when the robot enters sleep mode in the

following situations:

-

when it stops cleaning due to an error

-

when it cannot find its docking station in 20 minutes

If you do not see the robot, you can locate it by clapping your hands once.

The robot will respond by beeping and by lighting up all icons on its display.

1

2

3 Push one end of the dry wipe attachment towards the wheel on the

other side of the robot to release it. Then pull the attachment off the

robot.

Using the invisible wall (FC8822)

Placing the batteries in the invisible wall

The invisible wall operates on four AA batteries.

1

2

1 Push the two release tabs at the bottom of the back cover (1) and slide

the back cover upwards and off the invisible wall (2).

2 Take four new AA batteries from the pack and insert them into the

battery compartment of the invisible wall.

Note: Make sure the + and - poles of the batteries point in the right

direction.

3 Slide the back cover onto the invisible wall again.

18

English

Removing the dry wipe attachment

1 Remove the dry wipe attachment as soon as you have finished wiping

the floor.

2 Turn the robot upside down and place it on the floor or on a table.

Using the robot with the dry wipe attachment

When

the dry wipe attachment is attached, you can use the robot in any

mode and on all hard floors. Do not use the dry wipe attachment on carpet

or rugs.

1 Place the unit at a point you do not want the robot to cross, e.g at an

open door to a room that is off-limits to the robot.

2 Switch on the invisible wall with the on/off slide on top of the unit.

3 Start the robot.

4 When the robot comes too close to the invisible wall, the light on the

invisible wall starts flashing and the invisible wall emits a beam of

infrared light. This beam of infrared light makes the robot change its

course and move away from the invisible wall.

Note: If you use the invisible wall, regularly check if the batteries still contain

sufficient power. You can check this by switching the virtual wall off and on

again. If there is enough energy in the batteries, the LED on the invisible wall

will light up briefly.

Cleaning and maintenance

Cleaning the robot

To maintain good cleaning performance, you have to clean the drop-off

sensors, the wheels, the side brushes and the suction opening from time to

time.

1 Place the robot upside down on a flat surface

3

1

2

2 Use a brush with soft bristles (e.g. a toothbrush) to remove dust or fluff

from the drop-off sensors.

Note: It is important that you clean the drop-off sensors regularly. If the

drop-off sensors are dirty, the robot may fail to detect height differences

or staircases.

19

English

Positioning the invisible wall to stop the robot

You can use the invisible wall to prevent the robot from entering a room or

area that you want to keep it out of.

1

2

3

3 Use a brush with soft bristles (e.g. a toothbrush) to remove dust or fluff

from the front wheel and side wheels.

4 To clean the side brushes, grab them by the bristles and pull them off

their shafts.

5 Remove fluff, hairs and threads from the shaft and from the side brush

with a soft brush (e.g. a toothbrush) or a cloth.

6 Check the side brushes and the bottom of the robot for any sharp objects

that could damage your floor.

1

2

7 Undo the snap connections of the TriActive XL nozzle by inserting by

inserting your fingers at the places marked with arrows and pull the

TriActive nozzle off the robot.

8 Clean the suction opening with a soft brush (e.g. a toothbrush).

20

English

Pagina se încarcă ...

Philips FC8822/01 Manual de utilizare

Acest manual este potrivit și pentru

Philips FC8822/01 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente