Panasonic RFD20BTEG Instrucțiuni de utilizare

Marca: Panasonic

Model: RFD20BTEG

Tip: Instrucțiuni de utilizare

Acest manual este potrivit și pentru

Operating Instructions

DAB-FM Radio

Model No. RF-D20BT

RF-D20U

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

“EB” indicates the United Kingdom model.

TQBJ2029-3

EG GN

D20BT_en_gn.fm Page 1 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

These operating instructions are

applicable for models RF-D20BT and

RF-D20U.

RF-D20BT : Indicate features applicable

to RF-D20BT.

RF-D20U : Indicate features applicable to

RF-D20U.

Unless otherwise indicated, illustrations

in these operating instructions are of

RF-D20BT.

Your system and the illustrations can

look differently.

Safety precautions

WARNING!

Unit

• To reduce the risk of fire, electric

shock or product damage,

– Do not let water or other liquids

drip or splash inside the unit.

– Do not expose accessories (AC

mains lead and AC adaptor) to

rain, moisture, dripping or

splashing.

– Do not place objects filled with

liquids, such as vases, on

accessories.

– Use only the recommended

accessories.

– Do not remove covers.

– Do not repair this unit by yourself.

Refer servicing to qualified service

personnel.

CAUTION!

Unit

• Do not place sources of naked flames,

such as lighted candles, on this unit.

• This unit is intended for use in

moderate climates.

• This unit may receive radio

interference caused by mobile

telephones during use. If such

interference occurs, please increase

separation between this unit and the

mobile telephone.

AC mains lead

• The mains plug is the disconnecting

device. Install this unit so that the

mains plug can be unplugged from

the socket outlet immediately.

Battery

• Danger of explosion if battery is

incorrectly replaced. Replace only

with the type recommended by the

manufacturer.

• When disposing of the batteries,

please contact your local authorities

or dealer and ask for the correct

method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car

exposed to direct sunlight for a long

period of time with doors and

windows closed.

• Do not break open or short-circuit

the battery.

• Do not charge the alkaline or

manganese battery.

• Do not use the battery if the cover

has peeled off.

• Remove the battery if you do not use

the unit for a long period of time or if

the unit is to be powered exclusively

by AC power. Keep in a cool, dark

area.

Small objects

• The VOLUME knob and DC IN cover

can come off when pulled hard. To

prevent children from swallowing, do

not pull it off.

Product Identification Marking is

located on the bottom of the unit.

D20BT_en_gn.fm Page 2 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Caution for AC mains lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for your safety and

convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the replacement fuse has a

rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when

the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is

obtained.

A replacement fuse cover can be purchased from your local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and

B). Confirm the AC mains plug fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

Figure A Figure B

Fuse cover

Fuse (5 ampere)

D20BT_en_gn.fm Page 3 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Supplied accessories

Check and identify the supplied

accessories.

 1 AC mains lead

For the United Kingdom and Ireland

(K2CT3YY00034)

For Continental Europe

 1 AC adaptor

(TPBPA266)

Note:

Product numbers correct as of December

2016. These may be subject to change.

Table of contents

Safety precautions . . . . . . . . . . . . 2

Caution for AC mains lead . . . . . . 3

Supplied accessories . . . . . . . . . . 4

References . . . . . . . . . . . . . . . . . . 4

Overview of controls. . . . . . . . . . . 6

(Important) About the splash

proof . . . . . . . . . . . . . . . . . . . . . . 7

Power sources . . . . . . . . . . . . . . . 8

Getting started . . . . . . . . . . . . . . . 9

DAB/DAB+ . . . . . . . . . . . . . . . . . . 9

FM radio . . . . . . . . . . . . . . . . . . . 11

Bluetooth

. . . . . . . . . . . . . . . . . . 12

System settings . . . . . . . . . . . . . 14

Troubleshooting . . . . . . . . . . . . . 15

Maintenance . . . . . . . . . . . . . . . . 16

Specifications . . . . . . . . . . . . . . . 17

Limited Warranty (For Australia

only) . . . . . . . . . . . . . . . . . . . . . 22

References

Sales and Support

Information

For the United Kingdom and Ireland

Customer Communications Centre

• For customers within the UK: 0344

844 3899

• For customers within Ireland: 01 289

8333

• Monday – Friday 9:00am – 5:00pm

(Excluding public holidays).

• For further support on your product,

please visit our website:

www.panasonic.co.uk

Direct Sales at Panasonic UK

• Order accessory and consumable

items for your product with ease and

confidence by phoning our Customer

Communications Centre Monday –

Friday 9:00am – 5:00pm (Excluding

public holidays).

• Or go on line through our Internet

Accessory ordering application at

www.pas-europe.com

• Most major credit and debit cards

accepted.

• All enquiries transactions and

distribution facilities are provided

directly by Panasonic UK.

• It couldn’t be simpler!

• Also available through our Internet is

direct shopping for a wide range of

finished products. Take a browse on

our website for further details.

For Australia

D20BT_en_gn.fm Page 4 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

The symbols on this product (including

the accessories) represent the following:

About Bluetooth

Frequency band

• This system uses the 2.4 GHz

frequency band.

Certification

• This system conforms to the

frequency restrictions and has

received certification based on

frequency laws. Thus, a wireless

permit is not necessary.

• The actions below are punishable by

law:

– Taking apart or modifying the unit.

– Removing specification

indications.

Restrictions of use

• Wireless transmission and/or usage

with all Bluetooth

equipped devices

is not guaranteed.

• All devices must conform to

standards set by Bluetooth SIG, Inc.

• Depending on the specifications and

settings of a device, it can fail to

connect or some operations can be

different.

• This system supports Bluetooth

security features. But depending on

the operating environment and/or

settings, this security is possibly not

sufficient. Transmit data wirelessly to

this system with caution.

• This system cannot transmit data to

a Bluetooth

device.

Range of use

• Use this device at a maximum range

of 10 m.

• The range can decrease depending

on the environment, obstacles or

interference.

Interference from other devices

• This system may not function

properly and troubles such as noise

and sound jumps may arise due to

radio wave interference if this unit is

located too close to other Bluetooth

devices or the devices that use the

2.4 GHz band.

• This system may not function

properly if radio waves from a nearby

broadcasting station, etc. is too

strong.

Intended usage

• This system is for normal, general

use only.

• Do not use this system near an

equipment or in an environment that

is sensitive to radio frequency

interference (example: airports,

hospitals, laboratories, etc.).

Licenses

Class II equipment (The

construction of the product is

double-insulated.)

Standby

Panasonic cannot be held responsible

for data and/or information that can

possibly be compromised during a

wireless transmission.

The Bluetooth

word mark and logos

are registered trademarks owned by

Bluetooth SIG, Inc. and any use of

such marks by Panasonic

Corporation is under license. Other

trademarks and trade names are

those of their respective owners.

D20BT_en_gn.fm Page 5 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Overview of controls

A Standby/on switch [1]

Press to switch the unit from on to

standby mode or vice versa. In

standby mode, the unit is still

consuming a small amount of

power.

B Select “Bluetooth” as the audio

source

During Bluetooth

source playback,

press to pause or resume the

playback.

C Direct preset buttons

D View available information

E Auto tuning for FM stations

F Select desired frequency in manual

tuning

View available options

G Select the audio source

H Adjust the volume level

I Confirm an option

J View available menu

K Display panel

L RF-D20U DC-IN terminal and USB

port cover

RF-D20BT DC IN terminal cover

M Battery compartment

N Antenna

Extend the antenna,

adjust the length,

angle and direction

for best

reception.

Signal strength

indicator

Weak

Strong

(Blinking)

D20BT_en_gn.fm Page 6 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

(Important) About the splash proof

█ Cautions for using around water

Conform to following. Improper use

may result in a malfunction.

• Securely close the DC IN and battery

cover.

• Do not open or close the DC IN and

battery cover with wet hands or when

water droplets are on this unit. Doing

so may cause malfunction such as

terminal rusting with the water

droplets.

• Do not pour soap water or detergent,

or immerse in water.

• Remove any hair, lint, sand, dust,

etc., that maybe attached to the

rubber seal on the DC IN and battery

cover before closing.

• Leaving the device with water

droplets in a cold region may result

to malfunction such as the covers

stuck closed.

• The sound may become softer or

warped when water is accumulated

in the speaker of this unit. Wipe this

unit with dry soft cloth.

• Water may accumulate inside the

speaker and top of this unit. Tilt the

set to drain the water.

• When water enters inside this unit,

stop using this unit, and contact the

nearest Dealer or Service Center.

Malfunction due to exposure to water

by improper handling by the

customer will not be covered by the

warranty. Supplied accessories are

not splash proof.

█ Splash proof performance*

Specifications for this unit are equivalent of IPX3 of IEC 60529.

About the IPX3 (liquid ingress protection level against spraying water)

This unit is compatible to operate after water spraying up to 60 degrees from

vertical at 10 liters / min at a pressure of 80-100kN/m

for 5 minutes.

* Splash proof is not guaranteed under all conditions.

D20BT_en_gn.fm Page 7 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Power sources

Using the household mains

socket

Connect the AC adaptor and AC

mains lead firmly to the unit and the

household mains socket.

Note:

• Do not use any other AC adaptors

except the supplied one.

• The unit is in the standby condition

when the AC adaptor is connected. The

primary circuit is always

“live” as long

as the AC adaptor is connected to an

electrical outlet.

█ Charging a portable device

RF-D20U

The USB port at the rear of the unit can

be use to charge a portable device.

Note:

• You can charge the portable device only

when the unit is connected to the

household mains socket, either

switched on or in standby mode.

• Some devices cannot be charged as the

maximum USB charging current is 0.5 A

only.

(For the AC mains plug of three pins)

READ THE “Caution for AC mains

lead” BEFORE CONNECTION.

To household

mains socket

AC mains lead

AC adaptor

USB cable

(not supplied)

portable device

(not supplied)

D20BT_en_gn.fm Page 8 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Using the batteries (not

supplied)

Use alkaline or manganese batteries.

Install the batteries so that the poles (+

and –) align with those in the unit.

This unit will use the batteries as the

power source when you disconnect the

AC mains lead. The battery indicator

will light up.

The battery indicator shows the battery

levels.

Caution!

Be careful when adjusting the antenna

or in handling the unit, always keep the

antenna away from your face to avoid

an injury.

Note:

When the battery indicator

“” begins

flashing, replace all 3 of the batteries.

Getting started

1 Extend the antenna.

2 Press [1] to switch on the unit.

The first time you switch on the unit, it

will enter DAB mode and automatically

scan for stations. It sets the time and

date (if data is available) and starts

playing the first station it finds.

Note:

In standby mode, the unit shows the time

and date (only when the unit is powered by

AC).

DAB/DAB+

DAB (Digital Audio Broadcasting) is a

procedure of broadcasting the radio

digitally. It gives less interference and

better sound quality.

This unit supports DAB in “BAND III”

bands.

R6/LR6, AA

Number of stations found

D20BT_en_gn.fm Page 9 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

DAB operation

The first time you enter DAB mode, or if

the station list is empty, the unit will

start the full scan and memorise the

stations.

You can perform the full scan

procedure when there is a new station

or a station becomes available.

1 Press [SOURCE] to select “DAB”.

2 Press [MENU] to select “Full scan”

and then press [ENTER] to start

full scan.

To cancel, press [MENU].

█ Remove unavailable listed

stations

This unit indicates those stations that

are closed or no longer available with a

question mark in front of the station

name. You can remove these stations

from the station list.

1 Press [MENU] and then press

[ TUNE/SELECT ] to select

“Prune”.

2 Press [ENTER].

3 Press [ TUNE/SELECT ] to

select “Yes” and then press

[ENTER].

To cancel, select “No”.

Listening to a station

1 Press [ TUNE/SELECT ] to

select a station from the station

list.

2 Press [ENTER] to tune to the

selected station.

Note:

“ ” indicates a secondary service station.

Secondary service stations are always

listed next to their primary station in the

station list.

Presetting stations

You can preset up to 5 stations into the

direct preset buttons.

1 While listening to a station, press

and hold the desired direct preset

button ([1] to [5]).

Example: press and hold [2] to store

current station into preset

2 Press [ENTER] to preset the

station.

█ Listening to a preset station

Press the direct preset button ([1] to

[5]) to listen to the preset station.

D20BT_en_gn.fm Page 10 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Manual tuning

You can perform manual tuning to a

particular channel or frequency. This

can be useful when you are adjusting

the antenna to achieve the best

possible reception and scanning a

particular channel to update the station

list.

1 Press [MENU].

2 Press [ TUNE/SELECT ] to

select “Manual tune” and then

press [ENTER].

3 Press [ TUNE/SELECT ] to

select a frequency or channel and

then press [ENTER].

The display shows the received

signal strength of the selected

frequency. Adjust the antenna to

achieve the best reception.

Adjust the antenna so that the

received signal strength (solid

rectangles) exceeds the threshold

indicator.

Viewing available

information

You can view various information about

the DAB broadcast such as dynamic

label information (if available), signal

strength, program type, ensemble

name, channel number, bit rate, DAB

variant and date.

Press [DISPLAY] to view the available

information.

Press and hold [DISPLAY] to show the

default display.

FM radio

1 Press [SOURCE] to select “FM”.

2 Press [AUTO TUNE] to tune to a

station.

The unit stops tuning when it finds a

station.

Press [AUTOTUNE] again to tune to

the next station.

Manual tuning

Press [ TUNE/SELECT ] to tune to

the required station.

Threshold indicator

D20BT_en_gn.fm Page 11 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Presetting stations

You can preset up to 5 stations into the

direct preset buttons.

The first five stations are preset with a

default frequency for your convenience.

1 While listening to a station, press

and hold the desired direct preset

button ([1] to [5]).

2 Press [ENTER] to preset the

station.

█ Listening to a preset station

Press the direct preset button ([1] to

[5]) to listen to the preset station.

Viewing available

information

This unit can show the text data

transmitted by the radio data system

(RDS) available in some areas, such as

programme service, programme type

and date.

Press [DISPLAY].

Note:

RDS may not be available if reception is

poor.

Bluetooth

You can connect and play an audio

device wirelessly through Bluetooth

Preparation

• Switch on the Bluetooth

feature of

the device and put the device near

the system.

• Read the operating instructions of

the device for details.

Pairing a device

Preparation

If this system is connected to a

Bluetooth

device, disconnect it

(Z“Disconnecting a device”).

1 Press and hold [ ].

If “Pairing” is shown, continue with

step 5.

2 Press [MENU].

3 Press [ TUNE/SELECT ] to

select “Pairing” and then press

[ENTER].

4 Press [ TUNE/SELECT ] to

select “Yes” and then press

[ENTER].

“Pairing” is shown.

To cancel, select “No”.

5 Select “RF-D20BT” or “RF-D20U”

from the Bluetooth

menu of the

device.

If prompted for a passkey, input

“0000” or “1234”.

The device connects with this

system automatically after pairing is

complete.

Note:

You can pair up to 8 devices with this

system. If a 9th device is paired, the

device that has not been used for the

longest time will be replaced.

D20BT_en_gn.fm Page 12 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Connecting a device

Preparation

If this system is connected to a

Bluetooth

device, disconnect it

(Z“Disconnecting a device”).

1 Press [ ].

“Bluetooth Ready” is shown.

2 Select “RF-D20BT” or “RF-D20U”

from the Bluetooth

menu of the

device.

3 Start playback on the device.

Press [4/9] to pause or resume the

playback.

Note:

• A device must be paired to connect.

• This system can only connect to one

device at a time.

• When “Bluetooth” is selected as the

source, this system will automatically try

to connect to the last connected device.

Disconnecting a device

While a Bluetooth

device is

connected

1 Press [MENU].

2 Press [ TUNE/SELECT ] to

select “Disconnect” and then

press [ENTER].

3 Press [ TUNE/SELECT ] to

select “Yes” and then press

[ENTER].

“Bluetooth Ready” is shown.

To cancel, select “No”.

Alternatively, press and hold [ ] until

“Pairing” is shown to disconnect the

device.

D20BT_en_gn.fm Page 13 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

System settings

█ To view the System menu

When in DAB or Bluetooth mode

1 Press [MENU].

2 Press [ TUNE/SELECT ] to

select “System” and then press

[ENTER].

When in FM mode

Press [MENU].

█ To navigate around the menu

Press [ TUNE/SELECT ] to select

an item or option. Press [ENTER] to

confirm.

Example: Backlight setting displays

Indicates current setting

Alarm The Alarm Wizard is shown.

• Alarm: Alarm Off, Alarm On

Select “Alarm On” to switch on the alarm.

• On time: Set the hours and minutes of start time.

• Source: Buzzer, DAB, FM

Set the audio source.

If FM or DAB is set, select the last station you tuned in to (“Last

listened”) or a preset station as the audio source.

•Set the volume

The alarm starts at a low volume and increases gradually to the

preset level.

“ ” is shown after you set the alarm.

Note:

• The alarm does not work when the unit is powered by batteries.

• Check that the date and time are set correctly, or else the alarm may not

work as desired.

• The alarm will come on at the set time every day for a duration of

59 minutes. Press any button or turn any knob to stop the alarm.

• You need to set the alarm again every time you disconnect and connect

the AC power or after you replace the batteries.

Sleep The sleep timer switches off the unit after the set time (in minutes).

Sleep Off, 30 minutes, 60 minutes, 90 minutes, 120 minutes

“ ” is shown after you set the timer.

To cancel, select “Sleep Off”.

Equaliser Heavy, Soft, Clear, Vocal, Flat

“ ” is shown after you select the effect.

To cancel, select “Flat”.

D20BT_en_gn.fm Page 14 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Time The time and date information are updated automatically with the

DAB/RDS broadcast (if available).

You can also set the time and date manually with the Time menu.

This is a 24 hour clock.

• Set time: Set the hours and minutes.

• Set date: Set the day, month and year.

Dimmer • Off: Switches off the function.

• Dimmer 1: Decrease the brightness of the backlight.

• Dimmer 2: Further decrease the brightness of the backlight.

Backlight • On: The backlight is always on.

• 10 sec: The backlight switches off after 10 seconds of inactivity.

Language

RF-D20BT

You can change the language for the display panel.

English, Français, Deutsch, Italiano

Factory

Reset

No, Yes

Select “Yes” to reset the unit to factory default setting.

Auto

Power Off

(Bluetooth

mode

only)

• On: The unit automatically switches off when you do not use it for

approximately 20 minutes.

• Off

Note:

This function does not work when you are in radio source.

Troubleshooting

General

Sound is distorted or no sound.

• Adjust the volume.

• Check and adjust the antenna.

• Move the unit to another location and

do a full scan again.

• An AC mains lead or fluorescent light

is near the cables. Keep other

appliances and cords away from the

cables of this unit.

Reception is poor or beat sound is

heard.

• Keep the antenna away from

computers, TVs, other cables and

cords. Move mobile telephones away

from the unit if the interference is

apparent.

D20BT_en_gn.fm Page 15 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Bluetooth

Pairing cannot be done.

• Check the Bluetooth

device

condition.

• The device is out of the 10 m

communication range. Move the

device nearer to the system.

The device cannot be connected.

• The pairing of the device was

unsuccessful. Do pairing again.

• The pairing of the device has been

replaced. Do pairing again.

• This unit might be connected to a

different device. Disconnect the

other device and try connecting the

device again.

The device is connected but audio

cannot be heard through the system.

• For some built-in Bluetooth

devices,

you have to set the audio output to

“RF-D20BT” or “RF-D20U” manually.

Read the operating instructions of

the device for details.

Sound from the device is interrupted.

• The device is out of the 10 m

communication range. Move the

device nearer to the system.

• Remove any obstacle between the

system and the device.

• Other devices that use the 2.4 GHz

frequency band (wireless router,

microwaves, cordless phones, etc.)

are interfering. Move the device

nearer to the system and distance it

from the other devices.

Messages

“Alarm Not Saved.”

• The changes made to the alarm was

not saved, the changes will be lost.

“No DAB station”

• No DAB station available.

• Check the antenna.

• Move the unit to another location and

do a full scan again.

“Service not available”

•No DAB reception.

“Time Not Saved.”

• The changes made to the time was

not saved, the changes will be lost.

RF-D20U “USB charging error

Please remove device”

• The USB device is using too much

power. Disconnect the USB device,

switch off the system and then

switch on again.

Maintenance

To clean this system, wipe with a soft,

dry cloth.

• Never use alcohol, paint thinner or

benzine to clean this system.

• Before using chemically treated

cloth, read the instructions that came

with the cloth carefully.

D20BT_en_gn.fm Page 16 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Specifications

RF-D20BT RMS output power

AC adaptor 3 W per channel (4 Ω), 1 kHz, 10% THD

Battery 2 W per channel (4 Ω), 1 kHz, 10% THD

RF-D20U RMS output power

AC adaptor 2 W per channel (4 Ω), 1 kHz, 10% THD

Battery 2 W per channel (4 Ω), 1 kHz, 10% THD

Tuner

Preset memory FM 5 stations

Frequency modulation (FM)

Frequency range 87.50 MHz to 108.00 MHz (50 kHz step)

DAB

DAB memories 5 channels

Frequency band (wavelength)

Band III 5A to 13F (174.928 MHz to 239.200 MHz)

Sensitivity *BER 4x10

-4

Min requirement –98 dBm

Bluetooth

Version Bluetooth

Ver. 2.1 + EDR

Class Class 2

Supported profiles A2DP, AVRCP

Operating frequency 2402 MHz to 2480 MHz

Operation distance 10 m line of sight

Maximum RF power –1.80 dBm

Speaker

Full range 5 cm cone type x 1

Power supply

AC adaptor

Input AC 220 V to 240 V, 50/60 Hz

Output DC 5 V, 1.5 A

Main unit

Input DC 5 V, 1.5 A

Battery DC 4.5 V (3 x R6/LR6)

RF-D20U USB port power (charging only) DC OUT 5 V, 0.5 A

Power consumption (With “Dimmer” set to “OFF”) 2 W

D20BT_en_gn.fm Page 17 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Dimensions (W x H x D) 90 mm x 140 mm x 100 mm

Mass

With batteries 0.7 kg

Without batteries 0.6 kg

AC adaptor 0.1 kg

Operating temperature range 0°C to +40°C

Operating humidity range 20% to 80% RH (no condensation)

Splash proof IPX3 or equivalent

Battery life

(

RF-D20BT Operate at 120 mW with LCD Backlight OFF)

(

RF-D20U Operate at 80 mW with LCD Backlight OFF)

Note:

Specifications are subject to change without notice. Mass and dimensions are approximate.

Power source

Manganese R6 battery

Alkaline LR6 battery

Bluetooth

Approx. 2.5 H

Approx. 12 H

FM/DAB Approx. 2 H

Approx. 8 H

Power consumption in standby mode

(With “Dimmer” set to “OFF”)

0.8 W (approximate)

D20BT_en_gn.fm Page 18 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

RF-D20BT

English

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation”

declares that this product is in

compliance with the essential

requirements and other relevant

provisions of Directive 2014/53/EU.

Customers can download a copy of the

original DoC to our RE products from

our DoC Server:

http://www.doc.panasonic.de

Contact to Authorised Representative:

Panasonic Marketing Europe GmbH,

Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg,

Germany

Ελληνικά

∆ήλωση συμμόρφωσης (DoC)

Με την παρούσα, η “Panasonic

Corporation” δηλώνει ότι το προϊόν αυτό

είναι σύμφωνο με τις βασικές

απαιτήσεις και άλλες σχετικές διατάξεις

της οδηγίας 2014/53/ΕΕ.

Οι πελάτες μπορούν να κατεβάσουν ένα

αντίγραφο τουπρωτοτύπου DoC για τα

RE προϊόντα μας από τον DoC server

μας:

http://www.doc.panasonic.de

Στοιχεία επικοινωνίας

Eξουσιοδοτημένου Aντιπροσώπου:

Panasonic Marketing Europe GmbH,

Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg,

Γερμανία

Português

Declaração de Conformidade (DoC)

Com o presente documento, a

“Panasonic Corporation” declara que

este produto é conforme os requisitos

específicos e demais especificações

referentes à Directriz 2014/53/UE.

Os clientes podem baixar uma cópia da

declaração de conformidade (DoC)

para nossos produtos RE do Server

DoC:

http://www.doc.panasonic.de

Contacte o representante autorizado:

Panasonic Marketing Europe GmbH,

Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg,

Alemanha

Español

Declaración de conformid (DoC)

Por la presente, “Panasonic

Corporation” declara que este producto

cumple con los requerimientos

esenciales y otras provisiones

pertinentes de la Directiva 2014/53/UE.

Los clientes pueden descargar una

copia de la DoC original de nuestros

productos RE de nuestro servidor DoC:

http://www.doc.panasonic.de

Contacto del representante autorizado:

Panasonic Marketing Europe GmbH,

Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg,

Alemania

D20BT_en_gn.fm Page 19 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

TQBJ2029

Slovensko

Izjava o skladnosti (DoC)

S pričujočo izjavo podjetje “Panasonic

Corporation” izjavlja, da so svoji izdelki

skladni s poglavitnimi zahtevami in

drugimi odgovarjajočimi predpisi

direktive 2014/53/EÚ.

Stranka lahko naloži izvod izvirnega DoC

o naših izdelkih

s strežnika DoC:

http://www.doc.panasonic.de

Pooblaščeni zastopnik: Panasonic

Marketing Europe GmbH, Panasonic

Testing Centre, Winsbergring 15, 22525

Hamburg, Nemčija

Slovensky

Vyhlásenie o zhode (DoC)

“Panasonic Corporation” týmto

prehlasuje, že tento

výrobok je v zhode so základnými

požiadavkami a ďalšími príslušnými

ustanoveniami smernice 2014/53/EU.

Zákazníci si môžu stiahnuť kópiu

pôvodného DoC na naše RE výrobky z

nášho servera DoC:

http://www.doc.panasonic.de

Kontakt na splnomocneného zástupcu:

Panasonic Marketing Europe GmbH,

Panasonic Testing Centre, Winsbergring

15, 22525 Hamburg, Nemecko

Suomi

Vaatimustenmukaisuusvakuutus

“Panasonic Corporation” takaa, että

tämä tuote noudattaa direktiivin

2014/53/EU keskeisiä vaatimuksia ja

muita asianmukaisia ehtoja.

Asiakkaat voivat ladata

palvelimeltamme kopion RE

-tuotteidemme alkuperäisestä

vaatimustenmukaisuusvakuutuksesta:

http://www.doc.panasonic.de

Valtuutetun edustajan yhteystiedot:

Panasonic Marketing Europe GmbH,

Panasonic Testing Centre, Winsbergring

15, 22525 Hamburg, Saksa

Български

Декларация за съответствие (DoC)

“Panasonic Corporation” декларира, че

този продукт съответства на

съществените изисквания и другите

приложими разпоредби на Директива

2014/53/ЕС.

Потребителите могат да свалят копие

от оригиналните DoC към нашите

продуктите от типа RE от сървъра, на

който се съхраняват DoC:

http://www.doc.panasonic.de

За контакт с оторизиран

представител: Panasonic Marketing

Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525

Hamburg, Германия

Eesti keel

Vastavusdeklaratsioon (DoC)

“Panasonic Corporation” kinnitab

käesolevaga, et see toode on

vastavuses põhiliste nõuete ja muude

direktiivi 2014/53/EL asjakohaste

sätetega.

Kliendid saavad koopia meie RE

toodetele kehtiva

originaalvastavusdeklaratsiooni koopia

alla laadida meie DoC serverist:

ttp

://www.doc.panasonic.de

Võtke ühendust volitatud esindajaga:

Panasonic Marketing Europe GmbH,

Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg,

Germany

D20BT_en_gn.fm Page 20 Monday, June 12, 2017 1:56 PM

Rev 3

offset printing

Pagina se încarcă...

Panasonic RFD20BTEG Instrucțiuni de utilizare

Marca: Panasonic

Model: RFD20BTEG

Tip: Instrucțiuni de utilizare

Acest manual este potrivit și pentru

Descărcați PDF

raport

în alte limbi

English: Panasonic RFD20BTEG Operating instructions

Panasonic RFD20BTEG Instrucțiuni de utilizare

Acest manual este potrivit și pentru

Panasonic RFD20BTEG Instrucțiuni de utilizare

în alte limbi

Lucrări înrudite

Alte documente