ESAB PAV Manual de utilizare

Categorie
Sistem de sudare
Tip
Manual de utilizare
Valid for serial no. 0845--xxx--xxxx0460670 001 08--11--03
PAV
Bruksanvisning
Brugsanvisning
Bruksanvisning
Käyttöohjeet
Instruction manual
Betriebsanweisung
Manuel d’instructions
Gebruiksaanwijzing
Instrucciones de uso
Istruzioni per l’uso
Manual de instruções
Ïäçãßåò ÷ñÞóåùò
Instrukcja obs³ugi
Kezelési utasítások
Návod k pou¾ívání
Navod na pouitie
Lieto¹anas pamàcïba
Eksploatavimo instrukcijos
Priruènik s uputama
Manualul de instrucþiuni
-- 2 --
Rätt till ändring av specifikationer utan avisering förbehålles.
Ret til ændring af specifikationer uden varsel forbeholdes.
Rett til å endre spesifikasjoner uten varsel forbeholdes.
Oikeudet muutoksiin pidätetään.
Rights reserved to alter specifications without notice.
Änderungen vorbehalten.
Sous réserve de modifications sans avis préalable.
Recht op wijzigingen zonder voorafgaande mededeling voorbehouden.
Reservado el derecho de cambiar las especificaciones sin previo aviso.
Ci riserviamo il diritto di variare le specifiche senza preavviso.
Reservamo--nos o direito de alterar as especificações sem aviso prévio.
Äéáôçñåßôáé ôï äéêáßùìá ôñïðïðïßçóçò ðñïäéáãñáöþí ×ùñßò ðñïåéäïðïßçóç.
Zastrzegamy sobie prawo do wprowadzenia zmian.
Fenntartjuk az elözetes bejelentés nélküli változtatás jogát.
Výrobce si vyhrazuje právo na zmìnu údajû bez pøedcházejiciho upozomìni.
Výrobca si v y hradzuje právo na uskutoènenie zmien bez upovedomenia.
Tiek paturºtas tiesïbas bez iepriek¹ºja brïdinàjuma izmainït specifikàcijas.
Įmonė pasilieka teisę keisti specifikacijas be įspėjimo.
Rights reserved to alter specifications without notice.
Rights reserved to alter specifications without notice.
SVENSKA 5..............................................
DANSK 17................................................
NORSK 29................................................
SUOMI 41................................................
ENGLISH 53..............................................
DEUTSCH 65.............................................
FRANÇAIS 77.............................................
NEDERLANDS 89.........................................
ESPAÑOL 101..............................................
ITALIANO 113..............................................
PORTUGUÊS 125..........................................
ÅËËÇÍÉÊÁ 137.............................................
POLSKI 150.................................................
MAGYAR 163................................................
ÈESKY 175.................................................
SLOVENSKY 188.............................................
LATVIE©U 201...............................................
LIETUVIÙK 213..........................................
HRVATSKI 225..............................................
Rumanian 237...............................................
3
Enheten är provad av ESAB i en allmän inkoppling.
Ansvaret för den slutliga inkopplingens säkerhet och funktion åligger Intergratören.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
Enheden er testet af ESAB i en generel forbindelse.
Ansvaret for den endelige forbindelses sikkerhed og funktion påhviler integratoren.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
Enheten er testet av ESAB i en generell tilkobling. Den som integrerer systemet, har ansvaret for sik-
kerheten og funksjonen ved den endelige tilkoblingen.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
ESAB on koekäyttänyt yksikön yleisessä sähköliitännässä.
Va stuu lopullisen kytkennän turvallisuudesta ja toimimisesta on integraattorilla.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
The unit is tested by ESAB in a general purpose operation.
Responsibility for the safety and function of the final operation remains with the Integrator .
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
Die Einheit wurde von ESAB in einer allgemeinen Schaltung geprüft.
Die V erantwortung für die Sicherheit und Funktion der letztendlichen Schaltung liegt beim Integrator.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
L’unité est testée par ESAB sur un raccordement général.
L’Intégrateur est le seul responsable de la sécurité et du fonctionnement du raccordement définitif.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
De eenheid werd door ESAB getest in een algemene schakeling.
Diegene die de uiteindelijke schakeling uitvoert is aansprakelijk voor de veiligheid en werking ervan.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
La unidad ha sido probada por ESAB en una conexión general.
La seguridad y la funcionalidad de la conexión final son responsabilidad del Integrador .
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
L’unità è stata testata da ESAB in un impianto generico.
La sicurezza e il funzionamento dell’impianto finale sono di responsabilità dell’installatore.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
A unidade foi testada pela ESAB numa ligação de carácter geral.
O integrador é responsável pela segurança da ligação final e pelo funcionamento.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
Ç ìïíÜäá åßíáé äïêéìáóìÝíç áðü ôçí ESAB óå ìå êïéíÞ óýíäåóç.
Ç åõèýíç ãéá ôçí áóöÜëåéá êáé ëåéôïõñãßá ôçò ôåëéêÞò óýíäåóçò åßíáé ôïõ ïëïêëçñùôÞ.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
Jednostka zosta³a przetestowana przez firmê ESAB dla olnej konfiguracji pod³±czenia.
Za bezpieczeñstwo i dzia³anie koñcowej konfiguracji pod³±czenia odpowiada Wykonawca.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
Az egység az ESAB cégnél egy általános célú mûvelet során kipbálásra került.
A végsõ mûködés során a biztonságért és a ködésért az integrátor felel.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
Spoleènost ESAB jednotku testuje v obecném provozu.
Odpovìdnost za bezpeènost a funkènost koneèného provozu nese osoba, kte provedla zabudování.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
Jednotka je testovaná vo všeobecnej prevádzke spoloènos»ou ESAB.
Za bezpeènos» a funkènos» koneènej prevádzky stále zodpovedá integrátor.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
Iekàrta ir ESAB pàrbaudïta vispusïgas ekspluatàcijas apstàk¶os.
Par galaizmanto¹anas dro¹ïbu un darbïbu atbildïgs ir integrators.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
Įrenginio veikimas naudojant jį p agal benrąj
ą paskirtį patikrintas ESAB.
įrenginio galutinio veikimo saugą ir funkcijas atsako įrangos montuotojas.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
ESAB je testirao jedinicu u operaciji opæe namjene.
Odgovornost za sigurnost i funkciju završne operacije ostaje na Integratoru.
4
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
Unitatea este testatã de ESAB în timpul funcþionãrii în scop general.
Responsabilitatea pentru siguraã ºi funcþionarea fina este a Integratorului.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------------------------------------
ENGLISH
-- 5 3 --
TOCe
1SAFETY 54...........................................................
2 INTRODUCTION 56...................................................
2.1 General 56..................................................................
2.2 Variants 56..................................................................
2.3 Technical data 57............................................................
2.4 Main parts 58................................................................
3 INSTALLATION 59....................................................
3.1 General 59..................................................................
3.2 Installation and connection 59..................................................
4 OPERATION 60.......................................................
4.1 General 60..................................................................
4.2 Joint--tracking unit with control panel 60.........................................
4.3 Joint--tracking unit (Rear section) 61............................................
4.4 Portable control box 62.......................................................
4.5 Positioning before welding start 63..............................................
5 MAINTENANCE 64....................................................
5.1 General 64..................................................................
6 ACCESSORIES 64....................................................
DIAGRAM 250............................................................
DIMENSION DRAWING 253................................................
SPARE PARTS LIST 255...................................................
-- 5 4 --
SafGB
1SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorised person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from draughts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
GB
-- 5 5 --
SafGB
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is safe.
FUMES AND GASES -- Can b e dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with s uitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect your ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
GB
-- 5 6 --
hga2d1ea
2 INTRODUCTION
2.1 General
PAV is a control system for m otorised slides. The system is available in several
variants, see below.
2.2 Variants
S Joint--tracking unit with control panel.
S Joint--tracking unit with portable control box.
S Built--in component for columns and booms.
GB
-- 5 7 --
hga2d1ea
2.3 Technical data
PAV
Supply voltage 42V AC, 50--60 Hz
Current output 450 V A
Ambient temperature -- 1 5 ° C--+45° C
Relative atmospheric humidity Max. 98%
Max. motor current 6A 100%
Enclosure class IP 23
Current limits 15 A (hardware current limit)
Power supply fusing 10 A slow
Motor regulator, type Switched four quadrant reg.
Rotor voltage 40 V DC
Field voltage, separate magnetised motor 60 V DC
Weights:
Joint--tracking unit
Portable control box:
6,2 kg
2,7 kg (complete with 4m cable and protection)
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP 23 is designed for indoor and outdoor use.
GB
-- 5 8 --
hga2d1ea
2.4 Main parts
1. Joint--tracking unit (with or without control panel)
2. Portable control box
3. Motor cable (see Accessories)
For more information, see the chapter Operation”, on page 12.
GB
-- 5 9 --
hga2i1ea
3 INSTALLATION
3.1 General
The installation must be executed by a professional.
3.2 Installation and connection
1. Measurement information, see the dimension drawings on pages 253--254.
2. Connection, see the diagrams on pages 250--252.
3. Check that the required output and voltage is available for complete installation.
GB
-- 6 0 --
hga2o1ea
4 OPERATION
4.1 General
General safety regulations for the handling of the equipment can be found on
page 54. Read through before you start using the equipment!
4.2 Joint--tracking unit with control panel
Emergency stop (1)
S One press on the button activates EMERGENCY STOP
NB! An emergency stop must never be reset before the cause of the abnormal
function or signal has been established and rectified.
Signal lamp (white)
S Illuminates when the power has been switched on.
Control lever
S Manual control of the servo slides Up/Down and Left/Right.
Lamp pushbutton (rapid speed)
Selection of low or high speed during m anual positioning with the control lever.
S One press on the button activates rapid speed.
A la mp in the button illuminates when the function is activated.
S Return to low speed by pressing the button again
Check that the lamp has gone out before carrying out further commands.
GB
-- 6 1 --
hga2o1ea
4.3 Joint--tracking unit (Rear section)
1 Connection, power supply 42 V
2
Switch
Power supply On/Off
3 Socket, for connecting the vertical slide motor
4 Socket, for connecting the horizontal slide motor
5 Control fuse, 10 A slow
6 Socket (23--pin), for connecting the portable control box.
7 Sockets, for connecting the limit position switch
8 Extra sockets
9 Service contacts
1
4
2
3
8
7
6
5
9
9
7
7
7
8
8
8
8
GB
-- 6 2 --
hga2o1ea
4.4 Portable control box
Emergency stop (1)
S One press on the button activates EMERGENCY STOP
NB! An emergency stop must never be reset before the cause of the abnormal
function or signal has been established and rectified.
Signal lamp
(white)
S Illuminates when the power has been switched on.
Control lever
S Manual control of the servo slides Up/Down and Left/Right.
Lamp pushbutton (rapid speed)
Selection of low or high speed during m anual positioning with the control lever.
S One press on the button activates rapid speed.
A la mp in the button illuminates when the function is activated.
S Return to low speed by pressing the button again
Check that the lamp has gone out before carrying out further commands.
GB
-- 6 3 --
hga2o1ea
4.5 Positioning before welding start
1. Align the welding equipment into position in r elation to the weld joint with the
control lever .
2. For rough settings, press the lamp pushbutton . The lamp illuminates.
3. For precise settings and during welding, check that the lamp pushbutton
is not depressed. The lamp should be switched off.
GB
-- 6 4 --
hga2m1ea
5 MAINTENANCE
5.1 General
Note:
All warranty undertakings given by the supplier cease to apply if the customer
attempts to rectify any faults on the machine during the warranty period.
S Check that the cables are intact and that they are correctly connected.
S Clean the equipment with compressed air regularly.
S Follow the instructions for the internal components.
6 ACCESSORIES
Ordering
number:
Intermediate transformer for separate power supply, from mains power
190, 220, 380, 415, 440, 500V 50 Hz
200, 230, 380, 415, 440, 500V 60 Hz to secondary 42V, 660 VA
0148636002
Cable 3 x 2.5 mm
2
, connection, transformer 0262613404
A6 servo slide ball bushing type with permanent magnetised motor 42 V DC 0334333xxx
A6 motor driven slide, slide bearing mounted long runner, with A6 VEC motor 42V
-- 4000 rpm ratio 74:1
0334426xxx
Motor cable.
The cable is available in different lengths, see the appropriate sales brochure for
the servo slide. (Contact ESAB’s sales office.)
0417310xxx
GB
ESAB AB
SE--695 81 LAXÅ
SWEDEN
Phone +46 584 81 000
www.esab.co m
081016
ESAB subsidiaries and representative offices
Europe
AUSTRIA
ESAB Ges.m.b.H
Vienna--Liesing
Tel: +43 1 888 25 11
Fax: +43 1 888 25 11 85
BELGIUM
S.A. ESAB N.V.
Brussels
Tel: +32 2 745 11 00
Fax: +32 2 745 11 28
THE CZECH REPUBLIC
ESAB V AMBERK s.r .o.
Vamberk
Tel: +420 2 819 40 885
Fax: +420 2 819 40 120
DENMARK
Aktieselskabet ESAB
Herlev
Tel:+4536300111
Fax:+4536304003
FINLAND
ESAB Oy
Helsinki
Tel: +358 9 547 761
Fax: +358 9 547 77 71
FRANCE
ESAB France S.A.
Cergy Pontoise
Tel:+33130755500
Fax:+33130755524
GERMANY
ESAB GmbH
Solingen
Tel: +49 212 298 0
Fax: +49 212 298 218
GREAT BRITAIN
ESAB Group (UK) Ltd
Waltham Cross
Tel: +44 1992 76 85 15
Fax: +44 1992 71 58 03
ESAB Automation Ltd
Andover
Tel: +44 1264 33 22 33
Fax: +44 1264 33 20 74
HUNGARY
ESAB Kft
Budapest
Tel:+3612044182
Fax:+3612044186
ITALY
ESAB Saldatura S.p.A.
Mesero (Mi)
Tel:+3902979681
Fax:+390297289181
THE NETHERLANDS
ESAB Nederland B.V.
Amersfoort
Tel: +31 33 422 35 55
Fax: +31 33 422 35 44
NORWAY
AS ESAB
Larvik
Tel:+4733121000
Fax:+4733115203
POLAND
ESAB Sp.zo.o.
Katowice
Tel: +48 32 351 11 00
Fax: +48 32 351 11 20
PORTUGAL
ESAB Lda
Lisbon
Tel: +351 8 310 960
Fax: +351 1 859 1277
SLOVAKIA
ESAB Slovakia s.r.o.
Bratislava
Tel:+421744882426
Fax:+421744888741
SPAIN
ESAB Ibérica S.A.
Alcalá de Henares (MADRID)
Tel: +34 91 878 3600
Fax: +34 91 802 3461
SWEDEN
ESAB Sverige AB
Gothenburg
Tel:+4631509500
Fax:+4631509222
ESAB international AB
Gothenburg
Tel:+4631509000
Fax:+4631509360
SWITZERLAND
ESAB AG
Dietikon
Tel: +41 1 741 25 25
Fax: +41 1 740 30 55
North and South America
ARGENTINA
CONARCO
Buenos Aires
Tel: +54 11 4 753 4039
Fax: +54 11 4 753 6313
BRAZIL
ESAB S.A.
Contagem--MG
Tel: +55 31 2191 4333
Fax: +55 31 2191 4440
CANADA
ESAB Group Canada Inc.
Missisauga, Ontario
Tel: +1 905 670 02 20
Fax: +1 905 670 48 79
MEXICO
ESAB Mexico S.A.
Monterrey
Tel: +52 8 350 5959
Fax: +52 8 350 7554
USA
ESAB Welding & Cutting Products
Florence, SC
Tel: +1 843 669 44 11
Fax: +1 843 664 57 48
Asia/Pacific
CHINA
Shanghai ESAB A/P
Shanghai
Tel: +86 21 2326 3000
Fax: +86 21 6566 6622
INDIA
ESAB India Ltd
Calcutta
Tel: +91 33 478 45 17
Fax: +91 33 468 18 80
INDONESIA
P.T. ESABindo Pratama
Jakarta
Tel: +62 21 460 0188
Fax: +62 21 461 2929
JAPAN
ESAB Japan
Tokyo
Tel: +81 45 670 7073
Fax: +81 45 670 7001
MALAYSIA
ESAB (Malaysia) Snd Bhd
USJ
Tel: +603 8023 7835
Fax: +603 8023 0225
SINGAPORE
ESAB Asia/Pacific Pte Ltd
Singapore
Tel:+6568614322
Fax: +65 6861 31 95
SOUTH KOREA
ESAB SeAH Corporation
Kyungnam
Tel: +82 55 269 8170
Fax: +82 55 289 8864
UNITED ARAB EMIRATES
ESAB Middle East FZE
Dubai
Tel: +971 4 887 21 11
Fax: +971 4 887 22 63
Representative offices
BULGARIA
ESAB Representative Office
Sofia
Tel/Fax: +359 2 974 42 88
EGYPT
ESAB Egypt
Dokki--Cairo
Tel: +20 2 390 96 69
Fax: +20 2 393 32 13
ROMANIA
ESAB Representative Office
Bucharest
Tel/Fax: +40 1 322 36 74
RUSSIA
LLC ESAB
Moscow
Tel: +7 095 543 9281
Fax: +7 095 543 9280
LLC ESAB
St Petersburg
Tel: +7 812 336 7080
Fax: +7 812 336 7060
Distributors
For addresses and phone
numbers to our distributors in
other countries, please visit our
home page
www.esab.co m
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

ESAB PAV Manual de utilizare

Categorie
Sistem de sudare
Tip
Manual de utilizare

în alte limbi