Asus ROG MAXIMUS XII EXTREME Manual de utilizare

Categorie
Plăci de bază
Tip
Manual de utilizare
Motherboard
ROG
MAXIMUS
XII EXTREME
ii
E16774
Revised Edition V3
May 2020
Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by
any means, except documentation kept by the purchaser for backup purposes, without the express
written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM
ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional
data, you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from https://www.asus.com/support/
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
1F., No. 15, Lide Rd.,
Beitou Dist., Taipei City 112,
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notification to the email address [email protected], stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).
iii
Contents
Safety information ....................................................................................................... v
About this guide ......................................................................................................... vi
ROG MAXIMUS XII EXTREME specifications summary ........................................ vii
Connectors with shared bandwidth ........................................................................ xii
Package contents ..................................................................................................... xiv
Installation tools and components .......................................................................... xv
Chapter 1: Product Introduction
1.1 Before you proceed ...................................................................................1-1
1.2 Motherboard layout ....................................................................................1-2
Chapter 2: Basic Installation
2.1 Building your PC system ...........................................................................2-1
2.1.1 CPU installation...........................................................................2-1
2.1.2 Cooling system installation..........................................................2-3
2.1.3 DIMM installation.........................................................................2-5
2.1.4 M.2 installation ............................................................................2-6
2.1.5 Additional cooling kit installation .................................................2-8
2.1.6 Motherboard installation ..............................................................2-9
2.1.7 ATX power connection .............................................................. 2-10
2.1.8 SATA device connection ........................................................... 2-11
2.1.9 Front I/O connector ...................................................................2-12
2.1.10 Expansion card installation .......................................................2-13
2.1.11 DIMM.2 installation....................................................................2-16
2.1.12 Wi-Fi antenna installation ..........................................................2-18
2.2 BIOS update utility ................................................................................... 2-19
2.3 Motherboard rear and audio connections .............................................2-21
2.3.1 Rear I/O connection .................................................................. 2-21
2.3.2 Audio I/O connections ............................................................... 2-23
2.4 Starting up for the first time ....................................................................2-25
2.5 Turning off the computer ........................................................................2-25
Chapter 3: BIOS and RAID Support
3.1 Knowing BIOS ............................................................................................3-1
3.2 BIOS setup program ..................................................................................3-2
3.3 EZ Update ...................................................................................................3-2
3.4 ASUS EZ Flash 3 ........................................................................................3-3
3.5 ASUS CrashFree BIOS 3 ............................................................................3-4
3.6 RAID configurations ..................................................................................3-5
iv
Appendix
Q-Code table ............................................................................................................ A-1
Notices .................................................................................................................... A-5
ASUS contact information .................................................................................... A-12
v
Safety information
Electrical safety
To prevent electrical shock hazard, disconnect the power cable from the electrical
outlet before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These
devices could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
Before installing the motherboard and adding devices on it, carefully read all the
manuals that came with the package.
Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
Your motherboard should only be used in environments with ambient temperatures
between 0°C and 40°C.
vi
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.
How this guide is organized
This guide contains the following parts:
Chapter 1: Product Introduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes description of the switches, jumpers, and connectors on the
motherboard.
Chapter 2: Basic Installation
This chapter lists the hardware setup procedures that you have to perform when
installing system components.
Chapter 3: BIOS and RAID Support
This chapter tells how to boot into the BIOS, upgrade BIOS using the EZ Flash Utility
and support on RAID.
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1. ASUS website
The ASUS website (www.asus.com) provides updated information on ASUS hardware
and software products.
2. Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
CAUTION: Information to prevent damage to the components and injuries to
yourself when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
vii
ROG MAXIMUS XII EXTREME specifications summary
CPU
Intel
®
Socket LGA1200 for 10
th
Gen Intel
®
Core™, Pentium
®
Gold and
Celeron
®
processors*
Supports Intel
®
14 nm CPU
Supports Intel
®
Turbo Boost Technology 2.0 and Intel
®
Turbo Boost Max
Technology 3.0**
* Refer to www.asus.com for CPU support list.
** Intel
®
Turbo Boost Max Technology 3.0 support depends on the CPU types.
Chipset
Intel
®
Z490 Chipset
Memory
4 x DIMM, Max. 128GB, DDR4 4700+(O.C.) / 4600(O.C.) / 4500(O.C.) /
4400(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) /
3733(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) /
3200(O.C.) / 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666 / 2400 /
2133 MHz Non-ECC, Un-buffered Memory*
Dual Channel Memory Architecture
Supports Intel
®
Extreme Memory Profile (XMP)
OptiMem III
* 10
th
Gen Intel
®
Core™ i9/i7 CPUs support 2933/2800/2666/2400/2133 natively.
Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists).
Expansion Slots
Intel
®
10
th
Gen Processors
2 x PCIe 3.0 x16 slots (support x16 or x8/x8 modes)
Intel
®
Z490 Chipset
1 x PCIe 3.0 x4 slot*
* PCIEx4 slot shares bandwidth with SATA6G_56 and PCIEx4 slot is default
set at x2 mode.
Multi-GPU support
Supports NVIDIA 2-Way SLI
®
Technology
Supports AMD 3-Way CrossFireX™ Technology
Storage
Total supports 4 x M.2 slots and 8 x SATA 6Gb/s ports
Intel
®
10
th
Gen Processors
DIMM.2_1 slot (Key M) via ROG DIMM.2, type 2242/2260/2280/22110
(supports PCIe 3.0 x4 mode)*
DIMM.2_2 slot (Key M) via ROG DIMM.2, type 2242/2260/2280/22110
(supports PCIe 3.0 x4 mode)*
Intel
®
Z490 Chipset
M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 3.0 x4 & SATA
modes)**
M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 3.0 x4 mode)
8 x SATA 6Gb/s ports
Intel
®
Rapid Storage Technology supports Raid 0,1,5,10
Intel
®
Optane™ Memory Ready
* The DIMM.2 Slots are disabled by default. Please adjust BIOS settings to
enable DIMM.2 Slots.
** When M.2_1 is operating in SATA mode, SATA6G_2 will be disabled.
Ethernet
1 x Marvell
®
AQtion AQC107 10Gb Ethernet
1 x Intel
®
I225-V Ethernet
ASUS LANGuard
(continued on the next page)
viii
ROG MAXIMUS XII EXTREME specifications summary
Wireless & Bluetooth
Intel
®
Wi-Fi 6 AX201
2x2 Wi-Fi 6 (802.11 a/b/g/n/ac/ax) support 1024QAM/OFDMA/MU-MIMO
Supports up to 2.4Gbps max data rate
Supports 2.4/5GHz Dual-Band
Supports channel bandwidth: HT20/HT40/HT80/HT160
Supports CNVi interface
Bluetooth v5.1*
* BT 5.1 function will be ready in Windows 10 build 19041 or later.
USB
Rear USB (Total 12 ports)
1 x USB 3.2 Gen 2x2 port (1 x USB Type-C
®
)
3 x USB 3.2 Gen 2 ports (2 x Type-A + 1 x USB Type-C
®
)
6 x USB 3.2 Gen 1 ports (6 x Type-A)
2 x USB 2.0 ports (2 x Type-A)
Front USB (Total 10 ports)
2 x USB 3.2 Gen 2 front panel connectors (supports USB Type-C
®
)
2 x USB 3.2 Gen 1 headers supports additional 4 USB 3.2 Gen 1 ports
2 x USB 2.0 headers support additional 4 USB 2.0 ports
Audio
ROG SupremeFX 8-Channel High Definition Audio CODEC S1220
- Impedance sense for front and rear headphone outputs
- Jack-detection, Multi-streaming, Front Panel Jack-retasking
- High quality 120 dB SNR stereo playback output and 113 dB SNR
recording input
- Supports up to 32-Bit/192kHz playback*
Audio Features:
- SupremeFX Shielding Technology
- ESS™ ES9023 DAC + RC4580 OP AMP
- LED-illuminated audio jacks
- Rear optical S/PDIF out port
- Premium Japanese audio capacitors
- Audio cover
* Due to limitations in HDA bandwidth, 32-Bit/192kHz is not supported for
8-Channel audio.
Back Panel I/O Ports
1 x USB 3.2 Gen 2x2 port (1 x USB Type-C
®
)
3 x USB 3.2 Gen 2 ports (2 x Type-A + 1 x USB Type-C
®
)
6 x USB 3.2 Gen 1 ports (6 x Type-A)
2 x USB 2.0 ports (2 x Type-A)
1 x ASUS Wi-Fi Module
1 x Intel
®
I225-V Ethernet port
1 x Marvell
®
AQtion AQC107 10Gb Ethernet port
5 x LED-illuminated audio jacks
1 x Optical S/PDIF out port
1 x BIOS FlashBack™ button
1 x Clear CMOS button
(continued on the next page)
ix
ROG MAXIMUS XII EXTREME specifications summary
Internal I/O connectors
Fan and cooling related
1 x 4-Pin CPU Fan header
1 x 4-Pin CPU OPT Fan header
2 x 4-Pin Chassis Fan headers
8 x 4-Pin Radiator Fan headers
2 x W_PUMP+ headers
1 x WB_SENSOR header
1 x 2-pin Water In header
1 x 2-pin Water Out header
1 x 3-pin Water Flow header
1 x NODE header
Power related
1 x 24-pin Main Power connector
2 x 8-pin +12V Power connectors
1 x 4-Pin EZ_PLUG connector
Storage related
2 x M.2 slots (Key M)
1 x DIMM.2 slot supports 2 x M.2 slots (Key M)
8 x SATA 6Gb/s ports
USB
2 x USB 3.2 Gen 2 front panel connectors support USB Type-C
®
2 x USB 3.2 Gen 1 headers support additional 4 USB 3.2 Gen 1 ports
2 x USB 2.0 headers support additional 4 USB 2.0 ports
Miscellaneous
2 x AURA Addressable Gen 2 headers
2 x AURA RGB headers
1 x BIOS Switch button
1 x FlexKey button
1 x Front Panel Audio header (AAFP)
1 x LN2 Mode jumper
8 x ProbeIt Measurement Points
1 x ReTry button
2 x RSVD switch
1 x Safe Boot button
1 x Slow Mode switch
1 x Speaker header
1 x Start button
1 x 10-1 Pin System Panel header
1 x Thermal Sensor header
1 x Thunderbolt header
(continued on the next page)
x
ROG MAXIMUS XII EXTREME specifications summary
Special Features
ROG Extreme OC kit
- EZ PLUG
- FlexKey button
- LN2 Mode
- Probelt
- ReTry button
- Safe boot button
- Start button
- Slow Mode
Extreme Engine Digi+
- 10K Black Metallic Capacitors
- Infineon TDA21490 Power Stage
- MicroFine Alloy Choke
ASUS Q-Design
- ASUS Q-Code
- ASUS Q-Connector
- ASUS Q-DIMM
- ASUS Q-LED (CPU [red], DRAM [yellow], VGA [white], Boot Device
[yellow green])
- ASUS Q-Slot
ASUS Thermal Solution
- Aluminum M.2 heatsink cover
- Steel backplate
ASUS EZ DIY
- BIOS Flashback™ button
- Clear CMOS button
- Procool II
- Pre-mounted I/O shield
- SafeSlot
AURA Sync
- ROG Aura sync backplate
- Standard RGB headers
- Addressable Gen 2 RGB headers
LiveDash OLED 2”
(continued on the next page)
xi
ROG MAXIMUS XII EXTREME specifications summary
Software Features
ROG Exclusive Software
- Mem Tweakit
- RAMCache III
- ROG CPU-Z
- GameFirst VI
- Sonic Studio III + Sonic Studio Virtual Mixer
- Sonic Radar III
- DTS
®
Sound Unbound
- Overwolf
- BullGuard Internet Security (1-year full version)
ASUS Exclusive Software
Armoury Crate
- Aura Creator
- Aura Sync
- OLED Display
AI Suite 3
- 5-Way Optimization with AI Overclocking
TPU
EPU
Digi+ Power Control
Fan Xpert 4
Turbo app
- EZ update
AI Charger
WinRAR
UEFI BIOS
AI Overclocking Guide
ASUS EZ DIY
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 3
- ASUS UEFI BIOS EZ Mode
FlexKey
BIOS
2 x 256 Mb Flash ROM, UEFI AMI BIOS
Manageability
WOL by PME, PXE
Operating System
Windows
®
10 - 64 bit
Form Factor
EATX Form Factor
12 inch x 10.9 inch ( 30.5 cm x 27.7 cm)
Specifications are subject to change without notice. Please refer to the ASUS website for
the latest specifications.
xii
Connectors with shared bandwidth
A
A
C
B
A
B
C
Configuration 1 2 3 4
A
PCIEX16_1 x16 x8 x8 x8
PCIEX16_2 - x8 - x4
DIMM.2_1 - - x4 x4
DIMM.2_2 - - x4 -
Configuration
1 2
B
PCIEX4 x2 x4
SATA56 V -
Configuration 1 2
C
M.2_1 x4 -
SATA2 - V
xiii
The DIMM.2 Slots are disabled by default. Please adjust BIOS settings to enable
DIMM.2 Slots.
The PCIEx4 slot shares bandwidth with SATA6G_56 and PCIEx4 slot is default set at
x2 mode.
When M.2_1 is operating in SATA mode, SATA6G_2 will be disabled.
xiv
Package contents
Check your motherboard package for the following items.
Motherboard 1 x ROG MAXIMUS XII EXTREME motherboard
Cables
1 x Addressable RGB extension cable
1 x RGB extension cable
8 x ROG weave SATA 6G cables
1 x 3-in-1 Thermistor cables pack
Additional Cooling Kit
1 x Fan bracket
1 x ROG assistant fan (40mm)
Fan Extension Card II
1 x Fan Extension Card II
1 x Fan Extension Card II power
1 x Fan Extension Card II NODE connector cable
1 x Fan Extension Card II screw package
ROG DIMM.2 with Heatsink
1 x ROG DIMM.2 with heatsink
2 x M.2 pads for ROG DIMM.2
2 x M.2 screw packages for ROG DIMM.2
THUNDERBOLTEX 3-TR
1 x THUNDERBOLTEX 3-TR Card
2 x Mini DisplayPort cables
1 x ASUS TB header cable
1 x USB 2.0 Cable
Miscellaneous
1 x M.2 Rubber package
1 x M.2 SSD screw package
1 x Q-connector
1 x ROG logo plate stickers
1 x ROG multi-bit screwdriver
1 x ROG stickers
1 x ASUS 2x2 dual band Wi-Fi moving antennas
Installation Media 1 x USB drive with utilities and drivers
Documentation 1 x User manual
If any of the above items is damaged or missing, contact your retailer.
xv
Installation tools and components
Phillips (cross) screwdriver
PC chassis Power supply unit
Intel
®
LGA 1200 CPU Intel
®
LGA 1200 compatible CPU Fan
DDR4 DIMM SATA hard disk drive
SATA optical disc drive (optional) Graphics card (optional)
M.2 SSD module (optional) 1 Bag of screws
The tools and components in the table above are not included in the motherboard
package.
xvi
ROG MAXIMUS XII EXTREME
1-1
Chapter 1
Product Introduction
1
Chapter 1: Product Introduction
Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic pad or in
the bag that came with the component.
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or
change any motherboard settings.
1-2
Chapter 1: Product Introduction
Chapter 1
1.2 Motherboard layout
ROG MAXIMUS XII EXTREME
1-3
Chapter 1
Layout contents Page
1. CPU socket 1-4
2. DIMM slots 1-5
3. Expansion slots 1-7
4. Fan and Pump headers 1-9
5. Water Block header 1-10
6. Liquid Cooling System headers 1-10
7. Power connectors 1-11
8. M.2 Slot (Key M) 1-12
9. DIMM.2 slot 1-13
10. SATA 6GB/s port 1-14
11. USB 3.2 Gen 2 Front Panel connector 1-15
12. USB 3.2 Gen 1 header 1-15
13. USB 2.0 header 1-16
14. AURA Addressable Gen 2 header 1-17
15. AURA RGB header 1-18
16. BIOS Switch button 1-19
17. FlexKey button (Reset)
1-19
18. Front Panel Audio header 1-20
19. LN2 Mode jumper 1-20
20. Node header 1-21
21. ProbeIt Measurement Points 1-22
22. ReTry button 1-23
23. RSVD switch 1-23
24. Safe Boot button 1-24
25. Slow Mode switch 1-24
26. Start button 1-25
27. System Panel header 1-26
28. Thermal Sensor header 1-27
29. Thunderbolt header 1-28
30. Q-Code LED 1-29
31. Q-LEDs 1-30
32. BIOS LED 1-30
33. Storage Device Activity LED 1-31
34. 8-pin Power Plug LED 1-31
1-4
Chapter 1: Product Introduction
Chapter 1
1. CPU socket
The motherboard comes with a LGA1200 socket designed for 10
th
Gen Intel
®
Core™,
Pentium
®
Gold and Celeron
®
processors.
Ensure that you install the correct CPU designed for LGA1200 socket only. DO NOT
install a CPU designed for other sockets on the LGA1200 socket.
The CPU fits in only one correct orientation. DO NOT force the CPU into the socket
to prevent bending the connectors on the socket and damaging the CPU.
Ensure that all power cables are unplugged before installing the CPU.
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and
the socket contacts are not bent. Contact your retailer immediately if the PnP cap
is missing, or if you see any damage to the PnP cap/socket contacts/motherboard
components. ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
Keep the cap after installing the motherboard. ASUS will process Return
Merchandise Authorization (RMA) requests only if the motherboard comes with the
cap on the LGA1200 socket.
The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the
PnP cap.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

Asus ROG MAXIMUS XII EXTREME Manual de utilizare

Categorie
Plăci de bază
Tip
Manual de utilizare