Sames Cyclomix Multi / Multi PH Manual de utilizare

DOCUMENTATION

ELECTRONIC MIXING MACHINE

CYCLOMIX

MULTI / MULTI PH

Manual : 582.080.110-UK - 2201

Date : 04/01/22

Supersede : 23/05/16

Modif.: Update

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents relating

to this equipment (professional use only).

THE PICTURES A ND DRA WINGS A RE NON CONTRA CTUA L. WE RESERV E THE RIGHT TO MA KE CHA NGES WITHOUT PRIOR NOTICE.

SAMES KREMLIN SAS

l

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN N° : 578.033.130-1702

578.033.130 1702

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

FR UK DE

Pour une utilisation sure, Il est de votre responsabilité

de :

Lire attentivement tous les documents contenus

dans le CD joint avant la mise en service de

l’équipement,

D’installer, d’utiliser, d’entretenir et de réparer

l’équipement conformément aux préconisations de

SAMES KREMLIN ainsi qu’aux réglementations

nationales et/ou locales,

Vous assurez que les utilisateurs de cet équipement

ont été formés, ont parfaitement compris les règles de

sécurité et qu’ils les appliquent.

To ensure safe use of the machinery, it is your

responsibility to:

Carefully read all documents contained on the

enclosed CD before putting the machinery into service,

Install, use, maintain and repair the machinery in

accordance with SAMES KREMLIN's recommendations

and national and/or local regulations,

Make sure that the users of the machinery have

received proper training and that they have perfectly

understood the safety rules and apply them.

Eine sichere Nutzung setzt voraus, dass Sie: :

alle in der CD enthaltenen Dokumente vor der

Inbetriebnahme der Anlage aufmerksam lesen,

die Anlage im Einklang mit den Empfehlungen von

SAMES KREMLIN sowie mit den nationalen und/oder

lokalen Bestimmungen installieren, verwenden,

warten und reparieren,

sich vergewissern, dass die Nutzer dieser Anlage

angemessen geschult wurden, die

Sicherheitsbestimmungen verstanden haben und sie

anwenden.

ES IT PT

Para una utilización segura, será de su

responsabilidad:

leer atentamente todos los documentos que se

incluyen en el CD adjunto antes de la puesta en servicio

del equipo,

instalar, utilizar, efectuar el mantenimiento y reparar

el equipo con arreglo a las recomendaciones de

SAMES KREMLIN y a la normativa nacional y/o local,

cerciorarse de que los usuarios de este equipo han

recibido la formación necesaria, han entendido

perfectamente las normas de seguridad y las aplican.

Per un uso sicuro, vi invitiamo a:

leggere attentamente tutta la documentazione

contenuta nel CD allegato prima della messa in

funzione dell'apparecchio,

installare, utilizzare, mantenere e riparare

l'apparecchio rispettando le raccomandazioni di SAMES

KREMLIN, nonché le normative nazionali e/o locali,

accertarvi che gli utilizzatori dell'apparecchio

abbiano ricevuto adeguata formazione, abbiano

perfettamente compreso le regole di sicurezza e le

applichino.

Para uma utilização segura, é da sua

responsabilidade:

Ler atentamente todos os documentos incluídos no

CD em anexo antes de pör o equipamento em

funcionamento,

Proceder à instalação, utilização, manutenção e

reparação do equipamento de acordo com as

preconizações de SAMES KREMLIN, bem como com

outros regulamentos nacionais e/ou locais aplicáveis,

Assegurar-se que os utilizadores do equipamento

foram devidamente capacitados, compreenderam

perfeitamente e aplicam as devidas regras de

segurança.

NL SE FI

Voor een veilig gebruik dient u:

alle document op de bijgevoegde cd aandachtig te

lezen alvorens het apparaat in werking te stellen,

het apparaat te installeren, gebruiken, onderhouden

en repareren volgens de door SAMES KREMLIN

gegeven aanbevelingen en overeenkomstig de

nationale en/of plaatselijke reglementeringen,

zeker te stellen dat de gebruikers van dit apparaat

zijn opgeleid, de veiligheidsregels perfect hebben

begrepen en dat zij die ook toepassen.

För en säker användning av utrustningen ansvarar ni

för följande:

Läs noga samtliga dokument som finns på den

medföljande cd-skivan innan utrustningen tas i drift.

Installera, använd, underhåll och reparera

utrustningen enligt anvisningarna från SAMES

KREMLIN och enligt nationella och/eller lokala

bestämmelser.

Försäkra er om att användare av denna utrustning

erhållit utbildning, till fullo förstått säkerhetsföreskrifterna

och tillämpar dem.

Käytön turvallisuuden varmistamiseksi

velvollisuutesi on:

Lukea huolella kaikki CD:llä olevat asiakirjat ennen

laitteiston käyttöönottoa,

Noudattaa laitteiston asennuksessa, käytössä,

kunnossapidossa ja huollossa SAMES KREMLIN in

suosituksia sekä kansallisia ja/tai paikallisia

määräyksiä,

Varmistaa, että laitteiston käyttäjät ovat koulutettuja

ja ymmärtävät täysin turvallisuusmääräykset ja miten

niitä sovelletaan.

PL CS SL

Dla zapewnienia bezpiecznego użytkowania na

użytkowniku spoczywa obowiązek:

 Uważnego zapoznania się ze wszystkimi

dokumentami znajdującymi się na załączonej płycie CD

przed pierwszym uruchomieniem urządzenia,

 Instalowania, użytkowania, konserwacji i naprawy

urządzenia zgodnie z zaleceniami firmy SAMES

KREMLIN oraz z przepisami miejscowymi,

 Upewnienia, że wszyscy przeszkoleni użytkownicy

urządzenia zrozumieli zasady bezpieczeństwa i stosują

się do nich.

Pro bezpečné používání jste povinni:

 Před uvedením zařízení do provozu si pozorně

přečíst veškeré dokumenty obsažené na přiloženém

CD,

Nainstalovat, používat, udržovat a opravovat

zařízení v souladu s pokyny firmy SAMES KREMLIN

a s národními a/nebo místními legislativními předpisy,

 Ujistit se, že uživatelé tohoto zařízení byli vyškoleni,

že dokonale pochopili bezpečnostní pravidla a že je

dodržují.

Za varno uporabo ste dolžni:

 natančno prebrati vse dokumente na CD pred

zagonom stroja,

inštalirati, uporabljati, vzdrževati in popravljati

opremo po določilih SAMES KREMLIN in v skladu z

veljavnimi nacionalnimi in/ali lokalnimi predpisi,

poskrbeti, da so uporabniki te opreme ustrezno

usposobljeni, poznajo varnostne predpise in da jih

upoštevajo.

SK HU RO

V záujme bezpečného je vašou povinnosťou:

 pozorne si prečítať všetky dokumenty obsiahnuté na

priloženom CD predtým, ako zariadenie uvediete do

prevádzky,

 nainštalovať, používať, udržiavať a opravovať

zariadenie v súlade s odporúčaniami spoločnosti

SAMES KREMLIN a národnými a/alebo miestnymi

predpismi,

 uistiť sa, že používatelia tohto zariadenia boli

zaškolení, riadne porozumeli pravidlám bezpečnosti a

používajú ich.

A biztonságos használat érdekében az Ön

felelőssége, hogy:

 a berendezés üzembe helyezése előtt figyelmesen

elolvassa a mellékelt CD által tartalmazott összes

dokumentumot,

a berendezést a SAMES KREMLIN ajánlasainak

valamint a nemzeti és/vagy helyi szabályozásoknak

megfelelően helyezze üzembe, használja, tartsa karban

és javítsa,

megbizonyosodjon róla, hogy a berendezés

felhasználói képzettek, tökéletesen megértették és

alkalmazzák a biztonsági előírásokat.

Pentru o utilizare sigură, este responsabilitatea dvs.

să:

 Citiţi cu atenţie toate documentele de pe CD-ul

anexat, înainte de punerea în funcţiune a

echipamentului,

 Instalaţi, utilizaţi, întreţineţi şi reparaţi echipamentul

conform instrucţiunilor SAMES KREMLIN precum şi

reglementărilor naţionale şi/sau locale,

 Vă asiguraţi că utilizatorii acestui echipament au

fost instruiţi, au înţeles perfect regulile de securitate şi

le aplică integral.

Déclaration(s) de conformité au verso de ce document / Declaration(s) of conformity at the back of this document / Konformitätserklärung(en) auf der Rückseite dieser Unterlage

/ Declaración (es) de conformidad en el reverso de este documento / Dichiarazione/i di conformità sul retro del presente documento

/ Declaração(ções) de conformidade no verso do documento / Conformiteitsverklaring(en) op de keerzijde van dit document / Försäkran om överensstämmelse på omstående sida

av detta dokument / Vaatimustenmukaisuusvakuutukset tämän asiakirjan kääntöpuolella / Deklaracja(e) zgodności na odwrocie dokumentu

/ Prohlášení o shodě se nachází/nacházejí na zadní straně tohoto dokumentu / Deklaracija(e) o skladnosti na hrbtni strani tega dokumenta / Vyhlásenie/-a o zhode sa nachádzajú na

zadnej strane dokumentu / A dokumentum hátlapján szereplő megfelelőségi nyilatkoz(ok) / Declaraţii de conformitate pe versoul acestui document

SAMES KREMLIN - 2 - N° : 578.033.130-1702

DECLARATION UE DE CONFORMITE

UE DECLARATION OF CONFORMITY

EU- KONFORMITÄTSERKLÄRUNG

DECLARACIÓN UE DE CONFORMIDAD

DICHIARAZIONE DI CONFORMITÀ UE

DECLARAÇÃO UE DE CONFORMIDADE

EU-CONFORMITEITSVERKLARING

EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

EU- VAATIMUKSENMUKAISUUSVAKUUTUS

DEKLARACJA ZGODNOŚCI UE

EU PROHLÁŠENÍ O SHODĚ

IZJAVA EU O SKLADNOSTI

VYHLÁSENIE O ZHODE

EU-MEGFELELŐSÉGI NYILATKOZAT

DECLARAŢIA DE CONFORMITATE UE

Le fabricant / The manufacturer / Der Hersteller

/ El fabricante / Il produttore / O fabricante

/ De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce

/ Proizvajalec / Výrobca / Gyártó / Fabricantul:

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - FRANCE

Tél. : 33 (0)4 76 41 60 60

Déclare que le matériel désigné ci-après / Herewith declares that the equipment / erklärt hiermit, dass die / Declara que el material designado a

continuación / Dichiara che il materiale sottoindicato / Declara que o material a seguir designado / verklaart dat de hieronder aangeduide apparatuur

/ Kungör att den utrustning som anges här nedan / ilmoittaa, että alla mainitut laitteistot / Oświadcza, że wymienione poniżej urządzenia / Prohlašuje,

že níže uvedené vybavení / Izjavlja, da je opisana oprema spodaj / Vyhlasuje, že zariadenie uvedené nižšie / Kijelenti, hogy a megjelölt anyag a

továbbiakban / Declară că echipamentul precizat mai jos:

MACHINE DE DOSAGE ELECTRONIQUE / MIXING MACHINE

ELEKTRONISCHE 2-K- ANLAGE / MÁQUINA DE DOSIFICACIÓN ELECTRÓNICA

CYCLOMIX TM MULTI

CYCLOMIX TM MULTI PH

Est conforme à la législation d’harmonisation de l’Union applicable suivante / Is in conformity with the relevant Union harmonisation legislation / Erfüllt

die einschlägigen Harmonisierungsrechtsvorschriften der Union / es conforme con la legislación de armonización pertinente de la Unión / è conforme

alla pertinente normativa di armonizzazione dell’Unione / in overeenstemming met de desbetteffende harmonisatiewetgeving van de Unie / med den

relevanta harmoniserade unionslagstiftningen / on asiaa koskevan unionin yhdenmukaistamislainsäädännön vaatimusten mukainen / jest zgodny z

odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego / Shoduje se s následující příslušnou evropskou harmonizační legislativou

/ V skladu s harmonizirano zakonodajo Unije / Je v súlade s uplatniteľnými harmonizačnými právnymi predpismi EÚ / Megfelel a következő

alkalmazandó uniós harmonizációs szabályozásnak / Este conform cu legislaţia aplicabilă de armonizare de mai jos

Directive Basse Tension / Low Voltage Directive / Niederspannung-Richtlinie / Directiva Baja Tensión / Direttiva Bassa

Tensione / Directiva de Baixa Tensão / Richtlijn Laagspanning / Lågspänningsdirektivet / Pienjännitedirektiivi / Dyrektywa

Niskonapięciowa / Směrnice Pro Nízké Napĕtí / Direktiva O Nizki Napetosti / Smernica O Nízkom Napätí / Feszültséghatárra

Vonatkozó Irányelv / Directiva Privind Tensiunile Joase

2014/35/UE

Directive Compatibilité Electromagnétique / Electromagnetic Compatibility Directive / Richtlinie Für Elektromagnetische

Verträglchkeit / Directiva de Compatibilidad Eletromagnética / Direttiva Compatibilita Elettromagnetica / Directiva relativa à

Compatibilidade Eletromagnética / Richtlijn Elektromagnetische Compatibiliteit / Direktivet om Eletktromagnetisk Kompatibilitet

/ EMC-direktivi / Dyrektywa Kompatybilności Elektromagnetycznej / Směrnice Pro Elektromagnetickou Kompatibilitu

/ Direktiva O Elektromagnetni Združljivost / Smernica O Elektromagnetickej Kompatibilite / Az Elektromágneses

Összeférhetőségre vonatkozó Irányelv / Directiva Privind Compatibilitatea Electromagnetică

2014/30/UE

Directive ATEX / ATEX Directive / ATEX Richtlinie / Directiva ATEX / Direttiva ATEX / Diretiva ATEX

/ ATEX-Richtijn / ATEX-direktivet / ATEX-direktivi / Dyrektywa ATEX / Směrnice ATEX / Direktiva ATEX / Smernica ATEX

/ ATEX-irányelv

2014/34/UE

II 2G

Tous les composants électriques utilisés en zone 1 sont, individuellement conformes à la directive 2014/34/UE. Leur présence

combinée au sein de l’assemblage ne met pas en évidence de rsiques supplémentaires entraînant une évaluation globale de

type de la machine. / Each individual electrical component used in zone 1 is in conformity with the 2014/34/UE directive. Their

combined presence in the assembly has not highlighted any additional risks that would necessitate a comprehensive

assesment of this type of machinery.

Matériel / Equipment N° d’agrément / Approval N°

Barrière Zener / Zener barrier BAS 01 ATEX 7005

Electrovanne / Electrovalve ATEX LCIE 12 ATEX 3005 X

Capteur / Sensor element ATEX BVS 08 ATEX E 101

SAMES KREMLIN - 3 - N° : 578.033.130-1702

La présente déclaration de conformité est établie sous la seule responsabilité du fabricant / This declaration of conformity is issued under the sole

responsibility of the manufacturer / Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller / La presente

declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante / La presente dichiarazione di conformità è rilasciata sotto la

responsabilità esclusiva del fabbricante / A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante / Deze

conformiteitsverklaring wordt verstrekt onder volledige verantwoordelijkheid van de fabrikant / Denna försäkran om överensstämmelse utfärdas på

tillverkarens eget ansvar / Tämä vaatimustenmukaisuusvakuutus on annettu valmistajan yksinomaisella vastuulla / Niniejsza deklaracja zgodności

wydana zostaje na wyłączną odpowiedzianość producenta / Toto prohláŝení o skodě se vydává na výhradní odpovědnost výrobce / Za izdajo te izjave

o skladnosti je odgovoren izključno proizvajalec / Toto vyhlásenie o zhode sa vydáva / na vlastnú zodpovednosť výrobcu / Ezt a megfelelőségi

nylatkozatot a gyártó kizárólagos felelőssége mellett adják ti / Prezenta declaraţie de conformitate este emisă pe răspunderea exclusivă a

producătorului.

Philippe PROVENAZ

Directeur Innovation & Développement / Innovation & Development

Director / Direktor für Innovation & Entwicklung / Director de

Inovación y Desarrollo / Direttore Innovazione e sviluppo

/ Diretor de Inovação / Manager Innovatie en Ontwikkeling / Direktör

för Forskning och Utveckling / Innovaatio- ja kehitysjohtaja

/ Dyrektor ds. Innowacji I Rozwoju / Ředitel pro inovace a vývoj

/ Direktor za inovacije in razvoj / Riaditeľ pre inováciu a rozvoj

/ Innovációs és fejlesztési igazgató / Director Inovaţie şi Dezvoltare

Fait à Meylan, le / Established in Meylan, on / Geschehen zu Meylan, am / En Meylan, a / Redatto a Meylan, / Vastgesteld te Meylan, / Utformat i

Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, / Întocmită la Meylan,

pe data de 01/02/2017 - 02/01/2017

INSTRUCTION MANUAL

CYCLOMIXTM MULTI

CYCLOMIXTM MULTI PH

MIXING MACHINE

Manual : 1302 573.185.112

Date : 01/02/13 - Supersede : 10/02/12

Modif : Label markings + Screens updated + Page 34

TRANSLATION OF THE ORIGINAL MANUAL

IMPORTANT : before assembly and start-up, please read and clearly understand all

documents relating to this equipment (professional use only).

PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR

NOTICE.

SAMES KREMLIN SAS

l

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN Page 1 Manual : 573.185.112

TABLE OF CONTENTS

1.GENERAL SAFETY INSTRUCTIONS .......................................................................................................................... 3

INSTALLATION REQUIREMENTS ............................................................................................................ 3

EQUIPMENT REQUIREMENTS ................................................................................................................ 3

MAINTENANCE REQUIREMENTS ........................................................................................................... 4

ENVIRONMENT ........................................................................................................................................ 4

2.DESCRIPTION .............................................................................................................................................................. 5

3.OPERATING PRINCIPLE ............................................................................................................................................. 7

4.TECHNICAL FEATURES ............................................................................................................................................. 8

5.INSTALLATION ............................................................................................................................................................ 8

DESCRIPTION OF THE LABEL MARKINGS ............................................................................................ 8

INSTALLATION DIAGRAMS ..................................................................................................................... 9

CONNECTION OF THE CONTROL BAY AND OF THE MATERIAL PART ............................................ 11

6.OPERATING ............................................................................................................................................................... 12

DRIVING FROM THE MACHINE ............................................................................................................. 12

SWITCHING ON THE MACHINE ............................................................................................................ 13

7.FIRST SWITCHING ON .............................................................................................................................................. 14

8.FIRST PLACING INTO OPERATION ......................................................................................................................... 15

FLUSHING OF THE PUMPS AND OF THE MACHINE INTO SOLVENT ................................................ 15

START-UP OF THE MACHINE ............................................................................................................... 15

9.APPLICATION PROGRAMMING ............................................................................................................................... 16

LIST OF THE PARAMETERS .................................................................................................................. 16

EXPLANATION OF THE PARAMETERS ................................................................................................ 18

PARAMETERS OF THE PROGRAMS .................................................................................................... 22

SET UP THE PRIMING ........................................................................................................................... 24

BASE FLUSHING PARAMETER ............................................................................................................. 25

BASE AND CATALYST CALIBRATION PARAMETER ........................................................................... 26

CONSUMPTION OF THE FLUIDS .......................................................................................................... 27

10.MANUAL PRODUCTION ............................................................................................................................................ 27

11.CHANGE OF PROGRAM ........................................................................................................................................... 28

12.BATCH ........................................................................................................................................................................ 29

13.MIXING TEST ............................................................................................................................................................. 30

14.WEEKEND FLUSHING OR PRODUCTION FLUSHING ............................................................................................ 31

15.OTHER MENUS .......................................................................................................................................................... 32

AUTOMATIC MENU ................................................................................................................................ 32

AUTO-WASH MENU................................................................................................................................ 35

16.MAINTENANCE .......................................................................................................................................................... 36

17.TROUBLESHOOTING ................................................................................................................................................ 37

18.DISASSEMBLY - REASSEMBLY .............................................................................................................................. 42

MIXER ...................................................................................................................................................... 42

PILOTED VALVES - 200 BAR / 2900.6 PSI (FLUID VALVES AND TEST VALVES) .............................. 42

19.PREVENTIVE MAINTENANCE PLAN ........................................................................................................................ 43

SAMES KREMLIN Page 2 Manual : 573.185.112

ADDITIONAL DOCUMENTS :

Declaration EC declaration of conformity Doc. 578.033.130-UK

Annexes Pneumatic and electric diagrams

Mixing ratio chart

Doc. 573.185.120

Spare parts Cyclomix or Cyclomix PH Doc. 573.344.050 or Doc. 573.358.050

Color changer Doc. 573.186.112 + 573.187.050 + 573.188.050

Flow switch Doc. 573.320.050

AIRMIX® filter Doc. 573.253.050

SAMES KREMLIN Page 3 Manual : 573.185.112

Dear Customer,

You are the owner of our new mixing machine and we would like to take this opportunity to thank

you.

To make sure your investment will provide full satisfaction, special care has been taken by

SAMES KREMLIN during all designing and manufacturing processes.

To obtain the best result, safe and efficient operation of your equipment, we advice you to read and

make yourself familiar with this instruction and service manual. Indeed, the non-compliance with

instructions and precautions stated in this manual could reduce the equipment working-life, result in

operating trouble and create unsafe conditions.

1. GENERAL SAFETY INSTRUCTIONS

The CYCLOMIXTM MULTI mixing machine control bay shall be installed outside the

explosive area. It shall be installed in a safe area (non-explosive area according to

the ATEX directive - refer to § 6).

WARNING : Any misuse of the equipment or accessories can damage them, result in serious

body injury, fire or explosion hazard and reduce the equipment working life. Read, understand

and comply with the safety instructions hereafter.

The personnel involved in operating and servicing this equipment must be aware of all safety

requirements stated in this manual. The workshop supervisor must be certain that the personnel has

perfectly understood the safety instructions and complies with them.

Read all instruction manuals as well as the tags of the equipments before operating the equipment.

Read local safety instructions and comply with them.

 INSTALLATION REQUIREMENTS

 Ground the equipments.

Use the equipment only in a well-ventilated area to prevent from serious body injuries, fire and

explosion hazards. Do not smoke in the spray area.

Never stock paints and solvents in the spray area. Always close the pots and the tins.

Keep the spray area clean and free from debris (solvent, rags,…). Read paint and solvent

manufacturer's technical instructions. Spraying of some materials may result in hazardous working

conditions. To protect the operator, respirator mask, hand cream and glasses are required (Refer to

chapter "Safety equipment" of SAMES KREMLIN selection guide).

 EQUIPMENT REQUIREMENTS

The operating pressure of these equipments is particularly high. Consequently, some precautions

must be taken in order to prevent from accidents and from unsafe working conditions.

 Never exceed the components maximum working pressure of the equipment.

HOSES

Do not use hoses with a maximum burst-proof pressure less than four times the maximum service

pressure of the pump (see data sheet).

Be certain hoses are not crimped, leaking and not unrolled.

Be certain hoses are in good conditions and showing no evidence of damage.

 Use only air hose with static conductor to connect the pump with the spray gun.

All fittings must be tight and in good condition.

PUMP

 Ground the equipment (use the connection on the pump).

Do not use any product or solvent incompatible with the pump components.

Use the appropriate solvent for the material being sprayed to increase the equipment working life.

SAMES KREMLIN Page 4 Manual : 573.185.112

GUN

Never wipe the end of the tip with the fingers.

Always depressurize air and fluid hoses before carrying out any servicing on the gun.

Never point the spray gun at anyone or at any part of the body.

CYCLOMIXTM MULTI

 Do not install the control bay in an explosive area. It shall be in a safe area (non-explosive

area).

 Connect the control box to a mains supply fitted with a ground.

 A earth cable fits the material box. Connect the earth cable to a ground.

Do not use any product or solvent incompatible with the machine components.

Use the appropriate solvent for the material being sprayed to increase the equipment working life.

 Wear protective glasses to protect the operator from possible discharges during the

handling of the CYCLOMIXTM MULTI machine test valves.

 Do not use electrostatic spraying for water-based paints or paints with a resistivity lower

than 10 M.

 MAINTENANCE REQUIREMENTS

Guards (air motor cover, coupling shields, housings,…) have been designed for

safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

damage to property due to removal or partial removal of the guards.

 Never modify these equipments.

Check them daily, keep them in a good condition and replace the worn parts only with

SAMES KREMLIN parts.

Before cleaning or removing components of the equipment, it is compulsory :

1 - to stop the air supply,

2 - to open the gun fluid circuit to depressurize the hoses,

3 - to shut off the machine electrical supply,

4 - to open the drain valves.

 ENVIRONMENT

This equipment consists of a label plate with the name of the manufacturer, the

equipment part number, the interesting informations to use correcttly the

equipment (pressure, voltage…) and the above pictogram.

The equipment is designed with and consists of high quality materials and

components which can be re-used.

The 2002/96/EC European Directive covers all equipments with a crossed-out

bin pictogram. Please inform yourself about the collection systems for electric

and electronic equipments.

Please act according to local rules and do not throw the old equipments with

household wastes. A correct disposal of the old equipment will help prevent

negative consequences for the environment and health.

SAMES KREMLIN Page 5 Manual : 573.185.112

2. DESCRIPTION

1 Frame 12 Color changer

2 Control bay 13 Meter

3 Screen 14 Automatic valve

4 LED 15 Test valve (TA & TB)

5 Air regulator 16 Cord grip (robot interface unit)

6 Gauge 17 Cord grip (STD9 box supply)

7 Automaton 18 Beaker support (test valves)

8 Supply 19 Airmix filter in line

9 Electrovalve 20 Air filters

10 Flowmeter 21 USB Port

11 Pressure switch IN0 (cata) - IN1 (base) : automaton inlets

1

2

7

8

9

10

11

12

13

14

15

18

19

20

3

5

6

4

21

SAMES KREMLIN Page 6 Manual : 573.185.112

The CYCLOMIXTM MULTI mixing machine is designed for applying two-component paints and

varnishes (water-based or solvanted). It is available for 3 technologies of application : pneumatic

spraying, AIRMIX® spraying, AIRLESS® spraying (maximum pressure : 200 bar / 2,900 psi).

It comes in an independent and moving form. It is only supplied with compressed air (maximum 6 bar /

87 psi). It consists of : a control bay with automaton and electropneumatic control components, a frame

with a module that receives the volumetric meters and the automatic valves for materials and solvents.

FRONT PART OF THE BAY SCREEN

Ind. Description Function

E Red LED Fault

F Orange LED Operating (except production)

G Green LED Production

H Gauge Reading of the spraying air pressure (gun)

I Air regulator Adjustment of the spraying air pressure (gun)

J Gauge Reading of the CYCLOMIXTM MULTI air supply pressure

K Black push-button Emergency flushing if electricity shut off

L Yellow push-

button

Function stop

The machine is totally programmable via a man/machine interface. The screen indicates continuously,

by a simple identification, the statuses of the machine and enables to have access to the essential

functionalities : ON / OFF - FLUSHING - PRODUCTION.

The informations relating to the operating of the machine (real-time display of the ratio, of the

consumption…) can be read on the LCD screen.

The CYCLOMIXTM MULTI saves continuously the instantaneous consumptions of base, catalyst and

solvent as well as the total consumptions and the emissions of Volatile Organic Compounds (VOC)

during the operating of the machine.

On the cover plate, there are two cord grips. They are useful for the interface unit with a robot in the

situation of an automatic spraying and for supplying a STD9 box (115V / 230V) in the situation of using

an electrostatic gun.

Do not use electrostatic spraying for water-based paints or paints with a

resistivity lower than 10 M.

SAMES KREMLIN Page 7 Manual : 573.185.112

3. OPERATING PRINCIPLE

The BASE and CATALYST materials are sent to the mixing machine from pumps or pressure tanks.

Each material crosses a piloted valve and a meter. The cycle begins with the simultaneous opening of

the CATALYST and BASE valves. The 2 meters send their informations to the computer that shuts off

the catalyst valve when the computerized mixing ratio is reached.

The mixing process is based on a base constant flow. The catalyst flow is injected low in frequency.

The injection is made directly into the base flux at the mixer level.

The automaton checks continuously the mixing ratio and if it notices a fault that it cannot correct, an

alarm is activated. The machine goes on safety mode.

Example of machine : 2 catalysts and 3 colors

VP4

VP5

CA

CB

VP6

MEL

A1

A3

A2

SA B2

B1 SB1

SB2

A1 Base 1 piloted valve SB2 Cata 2 solvent piloted valve

A2 Base 2 piloted valve VP4 Cata test piloted valve

A3 Base 3 piloted valve VP5 Base test piloted valve

SA Base solvent piloted valve VP6 Injection piloted valve

B1 Cata 1 piloted valve CA Base meter

SB1 Cata 1 solvent piloted valve CB Cata meter

B2 Cata 2 piloted valve MEL Mixer

SAMES KREMLIN Page 8 Manual : 573.185.112

4. TECHNICAL FEATURES

Number of colors : from 1 to 7

Number of catalyst : from 1 to 3

Solvent and water-based paints compatibility

Possibility of automatic piloting via robot

Control external PLC

Batch

Different access levels to the software

Multilingual display

Display on the screen, in text form of the

machine operating, parameters, alarms and

faults

Mixing permanent check

Adjustable threshold alarm

Adjustable pot-life indicator

Automatic mixing control cycle

Automatic flushing cycle

VOC display

Total indicator for base, catalyst and solvent

consumption

Voltage : 230V / 115V - 75W

Minimum air pressure : 4 bar / 58 psi

Fluid pressure : from 2 to 200 bar / from 29 to 2900 psi

Weight : 65 kg / 143 lbs

Control box dimension :

 l = 600 mm / 23.6" , h = 600 mm / 23.6",

depth = 210 mm / 8.27"

Material box dimension :

 l = 600 mm / 23.6" , h = 770 mm / 30.3",

depth = 400mm / 15.75"

Stainless steel fluid circuit (base and catalyst) for

Cyclomix multi standard

316 L stainless steel catalyst circuit for Cyclomix multi

PH

Adjustable mixing ratio : from 0,6/1 to 20/1 and one

component (BASE volume / CATALYST volume) (from

166% to 5% and 0%)

Measure precision : 1 %

Mixed fluid flow : from 50 to 2000 cm3/mn

Fluid viscosity : from 30 to 5000 cps

OPTION :

Auto-wash

Remote control box

Fiber optic kit

5. INSTALLATION

 DESCRIPTION OF THE LABEL MARKINGS

The CYCLOMIXTM MULTI machine is fitted with 2 label markings : a label marking on the control

box and another one on the material box.

Label marking on the control box

(box located outside the spray booth)

Label marking on the material box

(material box located inside the spray booth 

marking in accordance with the ATEX directive)

SAMES KREMLIN Page 9 Manual : 573.185.112

Marking in accordance with the ATEX Directive

SAMES KREMLIN

STAINS FRANCE Name and address of the manufacturer

CE II 2 G II : group II 2 : class 2

Surface equipment meant to an area where explosive atmospheres due to

gas, vapours, mists are liable to appear from time to time in usual operating.

G : gas

Tension CYCLOMIXTM MULTI machine voltage

P air Maximum air pressure

P prod Maximum fluid pressure

Serie / Serial Number given by SAMES KREMLIN. The two first numbers indicate the

manufacturing year.

Ref CYCLOMIXTM MULTI machine part number

Phase Single phase

Fréquence 50-60Hz / Mains frequency

Ampérage Maximum current used

 INSTALLATION DIAGRAMS

1 - INSTALLATION OF THE FLUID PART IN A SPRAYBOOTH

B

A

Z1

Z2

1m

2

3

4

5

8B

R1

B

SB

A

SA

6

77

1a

1b

SAMES KREMLIN Page 10 Manual : 573.185.112

2 - INSTALLATION OF THE FLUID PART OUTSIDE THE SPRAYBOOTH

B

AZ1

Z2

1m

2

3

4

5

8

B

R1

B

SB

A

SA 6

6

77

1a

1b

1m

Z2

A Explosive area : area 1 (Z1) or area 2 (Z2)

(spray booth)

4 BASE pump

B Non-explosive area (safe area) 5 SOLVENT pump (base)

1 CYCLOMIXTM MULTI mixing machine

1a : Control bay

1b : Fluid part

6 Filter

2 CATA pump 7 Fluid pressure regulator

3 SOLVENT pump (cata) 8 Gun

The 1 m / 39.37" distance indicated in these diagrams is given for information only

and holds harmless SAMES KREMLIN. The user is liable for the exact delimitation of

the areas which depends on the material used, the material environment and on the

use conditions (refer to EN 60079-10 standard). The 1 m / 39.37" distance could be

adapted if the analysis carried out by the used requires it.

Connect the control box to a mains supply fitted with a ground.

A earth cable fits the material box. Connect the earth cable to a ground.

SAMES KREMLIN Page 11 Manual : 573.185.112

 CONNECTION OF THE CONTROL BAY AND OF THE MATERIAL PART

The control box of the CYCLOMIXTM MULTI mixing machine must be outside

the spray booth.

Check the mains voltage and the voltage of the CYCLOMIXTM MULTI

machine.

The CYCLOMIXTM MULTI must be connected to a clean and dry compressed air network (minimum 4

bar / 58 psi) and to a single-phase electric supply (230 V / 115V). An air filter installed on the air supply

of the machine equips the CYCLOMIXTM MULTI.

The length of the connections between the control bay and the material part

must not exceed 10 meters.

Assemble fluid hoses and air hoses between the pumps and the CYCLOMIXTM MULTI and between the

CYCLOMIXTM MULTI and the gun. When choosing fluid hoses, respect the pressures delivered by the

pumps. For the air hoses, assemble antistatic hoses.

You will connect on top part of the material

part frame :

R1 (Polyamide hose 7X10) : air supply hose

R3 (Polyamide hose 7X10) : box supply hose

(to connect on R3 of the box cover plate)

R4 (Polyamide hose 7X10) : spraying air

supply hose (to connect on R4 of the box

cover plate)

From 10 to 21 (hose 2.7X4) : to connect on

the box cover plate (same marking)

Connection of the meters and of the catalyst

injection electrovalve :

CA (electric cable 3 points)

CB (electric cable 3 points)

 Electric cables 3 points supplied.

ZENER barriers  refer to electric diagram

(see "Annexes" - Doc. 573.185.120)

EV6 (electric wire 2 points) :

 Electric cable 2 points supplied.

wire index 1 on the terminal 1 and wire index

29 on terminal 29 of the box.

SAMES KREMLIN Page 12 Manual : 573.185.112

Gun connection :

Connect the gun on the 2 outlets located on the plate

on the right (air and fluid supply).

R2 (F 1/4 BSP) : air hose

D (F 1/4 BSP) : mixed fluid hose

AW : supply of the auto-wash pneumatic push-button

(cord grip, polyamide hose 4X6)

Some Airmix ® in line filters are mounted on the base and catalyst color changers.

In the standard version, # 6 screens come with filters. They must be adapted to the material to be mixed

and changed if necessary (refer to Spare parts).

Hoses with fittings : fluid hoses on the Airmix® filters = male 1/2 JIC.

Assemble filters at the outlet of the BASE and CATA pumps.

Assemble pressure regulators at the outlet of the BASE and CATA pumps.

 Before connecting the CYCLOMIXTM MULTI, be certain the mains voltage is the same than the one

of the machine (230 V).

If no, open the door of the bay and switch over the supply switch (ind.8) (230V  115V).

Unscrew all regulators before supplying air to the installation.

Shut off the test valves (TA & TB).

6. OPERATING

 DRIVING FROM THE MACHINE

SCREEN

SAMES KREMLIN Page 13 Manual : 573.185.112

The different menus and the informations relating to the machine are displayed on the screen.

 Read carefully the messages and follow the instructions to operate the machine.

To surf from a menu to another, depress the screen.

 SWITCHING ON THE MACHINE

The placing of the system into operation requires that the BASE, CATALYST and

SOLVENT drums are full enough to ensure the production.

Connect the gun before placing the system into operation.

Supply control bay via the safety isolating switch (single-phase electric supply = 230 V/115V).

Switch on the bay (switch located on the side of the bay).

Supply air to the material part (index « R1 » minimum 4 bars / 58 psi), then connect the index R3 of the

material part to the index R3 of the CYCLOMIXTM MULTI control bay.

The supply pressure is read on the gauge located on the front part of the bay (index « J »).

Supply air to the pumps' air regulators (BASE, CATALYST, SOLVENT).

When switching on the bay, a menu is displaced on the screen.

Nota : Parameters have been programmed in the factory before the delivery of the machine. You must

adapt the parameters to the use. They must be modified by an authorized person (refer to list of

parameters).

SAMES KREMLIN Page 14 Manual : 573.185.112

7. FIRST SWITCHING ON

STANDARD MENU

Production Enables to make a priming then produce according to the parameters defined

Program choice Enables to choose a program to produce

Batch Enables to deliver a quantity of mixed material to define via TA & TB

Cyclomix parameters Enables to enter into the CYCLOMIXTM MULTI parameters

Pump priming Enables to prime the pumps during the first starting up

Carry out a test Enables to carry out a mixing ratio test

Flush the cyclomix Enables to flush the CYCLOMIXTM MULTI with solvent

Programs' parameters Enables to view, modify or print the parameters of each program as well as

the consumptions of materials

Read the messages displayed on the screen and follow the instructions to operate

the machine.

Go to " Program choice" each time you start the machine to confirm the shade in

progress.

Name of the program

Hour

Machine state Pot life evolution

SAMES KREMLIN Page 15 Manual : 573.185.112

8. FIRST PLACING INTO OPERATION

During that first placing into operation, it is compulsory to have all the pumps into

solvent as well as the machine to ensure the good quality of the fluid get by the

CYCLOMIXTM MULTI.

 FLUSHING OF THE PUMPS AND OF THE MACHINE INTO SOLVENT

 Carry out the connection indicated at § 6 (INSTALLATION).

 Shut off the 2 test outlets TA and TB and place a receptacle under these ones.

 Start the pumps with solvent and increase the fluid pressure to 1 bar / 14.5 psi.

 On the page of the display main menu, input «Pumps' priming».

The following view is displayed :

Keep the name of the pump pressing and open the corresponding test outlet so that the fluid drains

off.

Let flow during 1 minute and check that the activated meter pulse number counts properly.

Nota : The keys corresponding to the colors and to the catalysts which are not present in the

installation are inactive.

 START-UP OF THE MACHINE

 Start-up the pumps with materials.

 Shut off the test outlets TA and TB.

 Put the fluids at the pressure of production. Do not forget that the pressure of the catalyst must

be higher than the one of the base (about 5% to 10%).

 Keep the name of the pump pressing and open the corresponding test outlet gently so that the

fluid drains off. Let flow until clean material drains off.

 We advice you to open the solvent pump between each priming to flush the test outlet.

 Important : before exiting that page, you must end with the solvent pumps to flush

properly the test outlets.

 The CATALYST pressure must always be higher from 5 to 10% than the BASE

pressure.

Pulse

number

Pagina se încarcă ...

Sames Cyclomix Multi / Multi PH Manual de utilizare

Sames Cyclomix Multi / Multi PH Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente