Ferm HDM1047P Manual de utilizare

Marca: Ferm

Model: HDM1047P

Categorie: Unelte electrice

Tip: Manual de utilizare

WWW.FERM.COM

Original instructions 03

HDM1047P

Fig. A

Fig. B

5 8

DEMOLITION HAMMER

HDM1047P

Thank you for buying this FERM product. By

doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for

many years to come.

1. SAFETY WARNINGS

WARNING

Read the enclosed safety warnings,

the additional safety warnings and

the instructions. Failure to follow the safety

warnings and the instructions may result in

electricshock,ﬁreand/orseriousinjury.Save the

safety warnings and the instructions for future

reference.

The following symbols are used in the user

manual or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-

observance of the instructions in this

manual.

Risk of electric shock

Immediately remove the mains plug from

the mains if the mains cable becomes

damaged and during cleaning and

maintenance.

Always wear eye protection!

Wear hearing protection.

Wear a dust mask.

Wear safety gloves.

Do not dispose of the product in

unsuitable containers.

The product is in accordance with the

applicable safety standards in the

European directives.

GENERAL POWER TOOL SAFETY

WARNINGS

WARNING!

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodi ed plugs

and matching outlets will reduce risk of

electric shock.

b) Avoid body contact with earthed or

grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is

an increased risk of electric shock if your body

is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil,

sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric

shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply. Use

of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool while

you are tired or under the inuence of

drugs, alcohol or medication. A moment of

inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes,

hard hat, or hearing protection used for

appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool.

Carrying power tools with your nger on the

switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. This enables better

control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust

related hazards.

h) Do not let familiarity gained from frequent

use of tools allow you to become

complacent and ignore tool safety

principles. A careless action can cause

severe injury within a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your application. The

correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power

tool before making any adjustments,

changing accessories, or storing power

tools. Such preventive safety measures

reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended could

result in a hazardous situation.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow

for safe handling and control of the tool in

unexpected situations.

5) Battery tool use and care

a) Recharge only with the charger specied

by the manufacturer. A charger that is

suitable for one type of battery pack may

create a risk of re when used with another

battery pack.

Use power tools only with specically

designated battery packs. Use of any other

battery packs may create a risk of injury and re.

c) When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a re.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, ush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

e) Do not use a battery pack or tool that is

damaged or modied. Damaged or modied

batteries may exhibit unpredictable behaviour

resulting in re, explosion or risk of injury.

f) Do not expose a battery pack or tool to

re or excessive temperature. Exposure to

re or temperature above 130 °C may cause

explosion. NOTE The temperature „130 °C“

can be replaced by the temperature „265 °F“.

Follow all charging instructions and do not

charge the battery pack or tool outside

the temperature range specied in the

instructions. Charging improperly or at

temperatures outside the specied range may

damage the battery and increase the risk of re.

6) Service

a) Have your power tool serviced by a

qualied repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

b) Never service damaged battery packs.

Service of battery packs should only be

performed by the manufacturer or authorized

service providers.

Additional safety warnings for

demolition hammer

a) Wear ear protectors. Exposure to noise can

cause hearing loss.

b) Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal injury.

c) Hold power tool by insulated gripping

surfaces, when performing an operation

where the cutting accessory may contact

hidden wiring or its own cord. Cutting

accessory contacting a “live” wire may make

exposed metal parts of the power tool “live”

and could give the operator an electric shock.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate label.

Class II machine - Double insulation - You

don’t need any earthed plug.

If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk

of electric shock.

Replacement of power cords or plugs

If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard.

Use of extension leads

Only ever use approved extension leads that are

suitable for the power rating of the machine. The

minimum core thickness is 1.5 mm

. Whenever

using a reel extension lead, always fully unroll the

lead.

Immediately switch off the machine when:

• Excessive sparking of the carbon brushes.

• Interruption of the mains plug, mains lead or

mains lead damage.

• Defect switch.

• Smoke or stench of scorched isolation.

2. MACHINE INFORMATION

Intended use

The demolition hammer is intended for

demolishing concrete, chiseling off concrete,

grooving and bar cutting.

This machine can only be used with

SDS-Max chisels.

Technical specifications

Mains voltage 220-240 V ~

Mains frequency 50/60Hz

Power input 1.500 W

Impact rate 900-2.000/min

Impact energy 6-25J

Weight 10.64 kg

Sound pressure (L

) 92.2dB(A) K=3 dB(A)

Acoustic power (L

) 102.9dB(A) K=3 dB(A)

Vibration

Main grip a

h,Cheq

14.760m/s

K=1.5m/s

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardized test given in

EN60745. It may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories,

may significantly increase the exposure level.

•

The times when the tool is switched off or when

it is running but not actually doing the job, may

significantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm and organizing your work

patterns.

Description

The numbers in the text refer to the diagrams on

pages 2-3

Fig. A

1. On switch

2. Speed adjustment wheel

3. Off switch

4. Chuck

5. Locking sleeve

6. Main grip

7. Auxiliary grip

8. Chisel position lock ring

9. Lubrication point

3. ASSEMBLY

Before assembly, always switch off the

machine and remove the mains plug

from the mains.

Mounting and removing the accessory

Fig. B

Do not use blunt drill bits or chisels.

Immediately sharpen or replace blunt

drill bits or chisels.

Mounting

• Apply a few drops of oil to the shaft of the

accessory.

• Slide the locking sleeve (5) to the rear.

• Insert the accessory into the chuck (4).

• Release the locking sleeve (5).

Removing

• Slide the locking sleeve (5) to the rear.

• Remove the accessory from the chuck (4).

• Release the locking sleeve (5).

Changing chisel position

• Push the lock ring (8) forward and turn the

chisel to the desired position.

• Make sure the ring locks back in place before

using the machine.

Setting the auxiliary grip

Fig. A

Mounting

• Loosen the auxiliary grip (7) by turning the

knob counterclockwise.

• Turn the auxiliary grip (7) to the desired

position.

• Tighten the auxiliary grip (7) by turning the

knob clockwise.

4. USE

Switching On/Off

Fig. A

• SwitchthemachineonbypressingtheOn/Off

switch (1). Switch the machine off by pressing

the Off switch (3).

Speed adjustment

Fig. A

• Adjust the speed by turning the speed

adjustment wheel (2) to the desired maximum

speed.

Hints for optimum use

• Clamp the workpiece. Use a clamping device

for small workpieces.

• Firmly hold the machine by the grip.

• Switch on the machine.

• Do not apply too much pressure on the

machine. Let the machine do the work.

• Switch off the machine and wait for the

machine to come to a complete standstill

before putting the machine down.

5. CLEANING AND

MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

mains plug from the mains.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that

the ventilation openings are free of dust and

dirt. Remove very persistent dirt using a soft

cloth moistened with soapsuds. Do not use any

solvents such as gasoline, alcohol, ammonia

etc. Chemicals such as these will damage the

synthetic components.

Defects

The machine should be regularly inspected for

the following possible defects and repaired if

necessary.

• Damage to power cord.

• Brokenon/offtriggerassembly.

• Short circuiting.

• Damaged moving parts.

Faults

Should a fault occur, e.g. after wear of a part,

please contact your seller or the service address

on the warranty card. Separate you find an

exploded view showing the parts that can be

ordered.

WARRANTY

The warranty conditions can be found on the

separately enclosed warranty card.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected

at the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic

waste. According to the European Guideline

2012/19/ECforWasteElectricalandElectronic

Equipment and its implementation into national

right, power tools that are no longer usable must

be collected separately and disposed of in an

environmentally friendly way.

The product and the user manual are subject

to change. Specifications can be changed

without further notice.

Spare parts list

HDM1047P

No Description Position

481340 Rubber nose cap 1

481341 Protective sleeve 2

481342 Circlip 27×2 3

481343 Filler ring 4

481344 Shock absorption ring 5

481345 Movement limitera 6

481346 Insert block (2pcs) 7

481347 Change plate 8

481348 Support ring spring 9

481349 Position lock ring 10

481350 Position adjustment ring 11

481351 Steel ball 6,5 (8pcs) 12

481352 Hex. Socket Bolt M8x30 (4pcs) 13

481353 Spring washer M8 (4pcs) 14

481354 Flange cover 15

481355 O-Ring 63x2,65 16

481356 Hammer rod sleeve 17

481357 O Ring 31.5x2.5 18

481358 Circlip 41 19

481359 Oil Seal Ring 32x42x7 20

481360 Impact Pin 21

481361 O Ring 22x11 22

481362 Control plate 23

481363 Fixed distance sleeve 24

481364 O ring 35x3 25

481365 Impact block 26

481366 O ring 30,7x4.9 27

481367 Control sleeve 28

481368 Control sleeve Spring 29

481369 Cilinder 30

481370 Piston pin 31

481371 Piston 32

481372 Drive rod 33

481373 Gearbox 34

481374 Rotor 35

Spare parts list

HDM1047P

No Description Position

481375 Screw ST4x10 36

481376 Contact plate 37

481377 Spring for brush 38

481378 Carbon Brush set (2pcs) 39

481379 Screw ST4×14 40

481380 Brush holder set (2pcs) 41

481381 Insert 42

481382 Base of brush holder 43

481383 Bottom rotor bearing PT6201RST 44

481384 Bearing sleeve 45

481385 Bearing sleeve clamp 46

481386 Screw ST4X16 47

481387 Fan 48

481388 Nut M12 49

481389 Bottom Cover 50

481390 Screw ST5X16 51

481391 Oil slinger 52

481392 Magnet ring set 53

481393 Motor housing 54

481394 Inner hex screw M6X30 55

481395 Flat washer M6 56

481396 Stator 57

481397 Screw ST5X60 58

481398 Windshield 59

481399 Probe 60

481400 Screw ST3X10 61

481401 Ring 62

481402 Needle bearing 63

481403 Speed control 64

481404 Flat screw ST5X22 65

481405 Outer sleeve 66

481406 Flat washer M5 67

481407 Inner hex screw M5X16 68

481408 Inner hex screw M8X22 69

481409 Flat washer M8 70

Spare parts list

HDM1047P

No Description Position

481410 Rubber ring 71

481411 Connection bar 72

481412 Switch 73

481413 Cable protector 74

481414 Cable clamp 76

481415 Screw ST4X16 77

481416 Vibration absorbing sleeve 78

481417 Main handle 79

481418 Vibration absorbing spring holder 80

481419 Washer 6×18×1.5 81

481420 Vibration absorbing spring 82

481421 Inner hex screw M6X65 83

481422 Main handle cover 84

481423 Pad 85

481424 Screw M4X16 86

481425 Press plate of bearing 87

481426 Bearing 88

481427 Excentric gear 89

481428 O ring 79×2.8 90

481429 Shell cover 91

481430 O ring 71×2 92

481431 Woolen ring 12×18 93

481432 Oil cover 94

481433 Woolen ring 14×15 95

481434 Up cover 96

481435 Position ring 97

481436 Handle ring 98

481437 Inner hex screw M8X140 99

481438 Side handle 100

481439 Clamping knob 101

481440 Nut M8 102

481441 Knob cover 103

64 65

100

101

102

103

Exploded view

EN 60745-1, EN 60745-2-6, EN 55014-1, EN 55014-2,

EN 61000-3-2, EN 61000-3-3

2006/42/EC, 2014/30/EU, 2011/65/EU, 2012/19/EC

Zwolle, 01-09-2019 H.G.F Rosberg

CEO FERM

FERM - Lingenstraat 6 - 8028 PM - Zwolle - The Netherlands

(EN) We declare under our sole responsibility that this product is in conformity with

directive 2011/65/EU of the European parliament and of the council of 8 June on the

restriction of the use of certain hazardous substances in electrical and electronic

equipment is in conformity and accordance with the following standards and

regulations:

(DE) Der Hersteller erklärt eigenverantwortlich, dass dieses Produkt der Direktive

2011/65/EU des Europäischen Parlaments und des Rats vom 8. Juni 2011 über die

Einschränkung der Anwendung von bestimmten gefährlichen Stoffen in elektrischen

und elektronischen Geräten entspricht. den folgenden Standards und Vorschriften

entspricht:

(NL) Wij verklaren onder onze volledige verantwoordelijk heid dat dit product voldoet aan

de conform Richtlijn 2011/65/EU van het Europees Parlement en de Raad van 8 juni

2011 betreffende beperking van het gebruik van bepaalde gevaarlijke stoffen in

elektrische en elektronische apparatuur en in overeenstem ming is met de volgende

standaarden en reguleringen:

(FR) Nous déclarons sous notre seule responsabilité que ce produit est conforme aux

standards et directives suivants: est conforme à la Directive 2011/65/EU du

Parlement Européen et du Conseil du 8 juin 2011 concernant la limitation d’usage de

certaines substances dangereuses dans l’équipement électrique et électronique.

(ES) Declaramos bajo nuestra exclusiva responsabilidad que este producto cumple con

las siguientes normas y estándares de funcionamiento: se encuentra conforme con

la Directiva 2011/65/UE del Parlamento Europeo y del Consejo de 8 de junio de 2011

sobre la restricción del uso de determinadas sustancias peligrosas en los equipos

eléctricos y electrónicos.

(PT) Declaramos por nossa total responsabilida-de que este produto está em

conformidade e cumpre as normas e regulamentações que se seguem: está em

conformidade com a Directiva 2011/65/EU do Parlamento Europeu e com o

Conselho de 8 de Junho de 2011 no que respeita à restrição de utilização de

determinadas substâncias perigosas existentes em equipamento eléctrico e

electrónico.

(IT) Dichiariamo, sotto la nostra responsabilità, che questo prodotto è conforme alle

normative e ai regolamenti seguenti: è conforme alla Direttiva 2011/65/UE del

Parlamento Europeo e del Consiglio dell’8 giugno 2011 sulla limitazione dell’uso di

determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche.

(SV) Vi garanterar på eget ansvar att denna produkt upp fyller och följer följande

standarder och bestämmelser: uppfyller direktiv 2011/65/EU från Europeiska

parlamentet och EG-rådet från den 8 juni 2011 om begränsningen av användning av

farliga substanser i elektrisk och elektronisk utrustning.

(FI) Vakuutamme yksinomaan omalla vastuullamme, että tämä tuote täyttää seuraavat

standardit ja säädökset: täyttää Euroopan parlamentin ja neuvoston 8. kesäkuuta

2011 päivätyn direktiivin 2011/65/EU vaatimukset koskien vaarallisten aineiden

käytön rajoitusta sähkö- ja elektronisissa laitteissa.

(NO) Vi erklærer under vårt eget ansvar at dette produktet er i samsvar med følgende

standarder og regler: er i samsvar med EU-direktivet 2011/65/EU fra Europa-

parlamentet og Europa-rådet, pr. 8 juni 2011, om begrensning i bruken av visse

farlige stoffer i elektrisk og elektronisk utstyr.

(DA) Vi erklærer under eget ansvar, at dette produkt er i overensstemmelse med følgende

standarder og bestemmelser: er i overensstemmelse med direktiv 2011/65/EU fra

Europa-Parlamentet og Rådet af 8. juni 2011 om begrænsning af anvendelsen af

visse farlige stoffer i elektrisk og elektronisk udstyr.

(HU) Felelősségünk teljes tudatában kijelentjük, hogy ez a termék teljes mértékben

megfelel az alábbi szabványoknak és előírásoknak: je v souladu se směrnicí

2011/65/EU Evropského parlamentu a Rady EU ze dne 8. června 2011, která se týká

omezení použití určitých nebezpečných látek v elektrických a elektronických

zařízeních.

(CS) Na naši vlastní zodpovědnost prohlašujeme, že je tento výrobek v souladu s

následujícími standardy a normami: Je v súlade s normou 2011/65/EÚ Európskeho

parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých

nebezpečných látok v elektrickom a elektronickom vybavení.

(SK) Vyhlasujeme na našu výhradnú zodpovednosť, že tento výrobok je v zhode a súlade

s nasledujúcimi normami a predpismi: Je v súlade s normou 2011/65/EÚ Európske

ho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých

nebezpečných látok v elektrickom a elektronickom vybavení.

(SL) S polno odgovornostjo izjavljamo, da je ta izdelek v skladu in da odgovarja nasledn

jim standardom terpredpisom: je v skladu z direktivo 2011/65/EU Evropskega parla-

menta in Sveta z dne 8. junij 2011 o omejevanju uporabe določenih nevarnih snovi v

električni in elektronski opremi.

(PL) Deklarujemy na własną odpowiedzialność, że ten produkt spełnia wymogi zawarte w

następujących normach i przepisach: jest zgodny z Dyrektywą 2011/65/EU Parla

mentu Europejskiego i Rady z dnia 8 czerwca 2011 r. w sprawie ograniczenia stoso-

wania niektórych niebezpiecznych substancji w sprzęcie elektrycznym i elektronic-

znym.

(LT) Prisiimdami visą atsakomybę deklaruojame, kad šis gaminys atitinka žemiau

paminėtus standartus arba nuostatus: atitinka 2011 m. birželio 8 d. Europos

Parlamento ir Tarybos direktyvą 2011/65/EB dėl tam tikrų pavojingų medžiagų

naudojimo elektros ir elektroninėje įrangoje apribojimo.

(LV) Ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai

2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un

elektroniskās iekārtās.

(ET) Apgalvojam ar visu atbildību, ka šis produkts ir saskaņā un atbilst sekojošiem stand

artiem un nolikumiem: ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8.

jūnija Direktīvai 2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu

elektriskās un elektroniskās iekārtās.

(RO) Declarăm prin aceasta cu răspunderea deplină că produsul acesta este în

conformitate cu următoarele standarde sau directive: este în conformitate cu

Directiva 2011/65/UE a Parlamentului European şi a Consiliului din 8 iunie 2011 cu

privire la interzicerea utilizării anumitor substanţe periculoase la echipamentele

electrice şi electronice.

(HR) Izjavljujemo pod vlastitom odgovornoĻśu da je strojem ukladan sa slijedeśim

standardima ili standardiziranim dokumentima i u skladu sa odredbama: usklađeno s

Direktivom 2011/65/EU europskog parlamenta i vijeća izdanom 8. lipnja 2011. o

ograničenju korištenja određenih opasnih tvari u električnoj i elektroničkoj opremi.

(SRL) Pod punom odgovornošću izjavljujemo da je usaglašen sa sledećim standardima ili

normama: usaglašen sa direktivom 2011/65/EU Evropskog parlamenta i Saveta od

8.juna.2011. godine za restrikciju upotrebe određenih opasnih materija u električnoj i

elektronskoj opremi.

(RU) Под свою ответственность заявляем, что данное изделие соответствует

следующим стандартам и нормам: соответствует требованиям Директивы

2011/65/EU Европейского парламента и совета от 8 июня 2011 г. по

ограничению использования определенных опасных веществ в электрическом

и электронном оборудовании

(UK) На свою власну відповідальність заявляємо, що дане обладнання відповідає

наступним стандартам і нормативам: задовольняє вимоги Директиви 2011/65/

ЄС Європейського Парламенту та Ради від 8 червня 2011 року на обмеження

використання деяких небезпечних речовин в електричному та електронному

обладнанні.

(EL) Δηλώνουμε υπεύθυνα ότι το προϊόν αυτό συμφωνεί και τηρεί τους παρακάτω

κανονισμούς και πρότυπα: συμμορφώνεται με την Οδηγία 2011/65/ΕΕ του Ευρωπαϊκού

Κοινοβουλίου και του Συμβουλίου της 8ης Ιουνίου 2011 για τον περιορισμό της χρήσης

ορισμένων επικίνδυνων ουσιών σε ηλεκτρικό και ηλεκτρονικό εξοπλισμό.

DECLARATION OF CONFORMITY

HDM1047P - DEMOLITION HAMMER

WWW.FERM.COM

1909-12

Ferm HDM1047P Manual de utilizare

Marca: Ferm

Model: HDM1047P

Categorie: Unelte electrice

Tip: Manual de utilizare

Descărcați PDF

raport

în alte limbi

English: Ferm HDM1047P User manual

Ferm HDM1047P Manual de utilizare

Ferm HDM1047P Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente