Ubiquiti UCK-G2-PLUS Ghid de inițiere rapidă

Model: UCK-G2-PLUS

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi® Cloud

Key Gen2 Plus. This Quick Start Guide is designed to guide you

through installation and also includes warrantyterms.

Package Contents

UniFi Cloud Key Gen2 Plus

System Requirement

Web Browser: Google Chrome (Other browsers may have

limited functionality.)

TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the professional

installer’s responsibility to follow local country regulations, including operation within legal

frequency channels, output power, indoor cabling requirements, and Dynamic Frequency

Selection (DFS) requirements.

Network Topology Requirement

A DHCP-enabled network (for the UniFi Cloud Key to obtain

an IP address)

US-16-150W

USG-PRO-4

(DHCP Server)

Internet

LAN

WAN

UniFi Cloud Key

Sample Network Diagram

Hardware Overview

Front Panel LED

Color State Status

White Solid Ready for configuration

Flashing Initializing

Heartbeat

Flashing

Firmware upgrade in

progress. Device is busy; do

not touch or unplug it.

Blue Solid Device ready for use

Flashing Shutting down

Rapid

Flashing

Device failure; refer to the

display for more information.

Slow

Flashing

User connected to device

Off/White/Blue Repeating Recovery mode

Front Panel

UniFi Video

Last Moon

LCD

Screen

LCD Screen Displays device status information and the

following:

UniFi SDN

18

UniFi SDN

Acve

7

1.4k

UniFi SDN

Acve

1.4k

Icon Description

UniFi SDN Controller software

Local IP address

Status of internet connection

Number of wired client devices or

throughput of wired network traffic

Number of wireless client devices or

throughput of wireless network traffic

Status of cloud access

UniFi Video

Last Moon

Icon Description

UniFi Video software

Local IP address

Status of internet connection

Number of active cameras

Time of last motion detected

Standby

192.168.1.1

UniFi Cloud Key

Icon Description

Status of internet connetion

Local IP address

Device name

Status of Bluetooth

Back Panel

microSD

Slot

Reset

Button

USB Type C

Port

Ethernet

Port

Power

Button

USB Type C

Power Port

Reset The Reset button serves two functions:

• Restart Press and release the Reset button quickly.

• Restore to Factory Default Settings Press and hold the

Reset button for more than five seconds.

Power Button Press to turn the UniFi Cloud Key on or off.

USB Type C Power Port Used for power if PoE is not available.

Requires 9V, 2A or QuickCharge 2.0.

microSD Slot (Optional) Used for external backup (microSD

card not included).

Ethernet Port Connects to a DHCP server on your LAN. Power

can be provided by an 802.3af PoE switch, such as the UniFi

PoE Switch.

USB Type C Port Reserved for future use.

Side Panels

Rack-Mount

Notch

Security

Lock Slot

Rack-Mount

Notch

Security Lock Slot Allows the UniFi Cloud Key to be used with

an optional security cable or lock (not included).

Rack-Mount Notches Lock the UniFi Cloud Key into place

when used with the optional rack-mount accessory (not

included).

Bottom Panel

HDD Latch

13-Pin Connector

13-Pin Connector Connects to the optional rack-mount

accessory (not included).

HDD Latch Releases the HDD bay tray.

Hardware Installation

1. Connect an Ethernet cable (not included) to the Ethernet

port.

2. Connect the other end of the Ethernet Cable to a port on a

network switch, such as a UniFi PoE Switch.

1 3 5 7 9 11 13 15 17 19 21 22

2 4 6 8 10 12 14 16 18 20 22 24

SFP1

SFP2

Powering the UniFi Cloud Key

Use an 802.3af-compliant switch, such as a UniFi PoE Switch, or

a USB power source (not included).

UniFi Switch

The UniFi Cloud Key can be powered by a UniFi PoE Switch or

other 802.3af-compliant switch.

1 3 5 7 9 11 13 15 17 19 21 22

2 4 6 8 10 12 14 16 18 20 22 24

SFP1

SFP2

UniFi Switch Power Connection Diagram

USB Power Source

Connect a USB cable (not included) from the UniFi Cloud Key

directly to a USB power source: 9V,2A or QuickCharge 2.0.

USB Power Connection Diagram

Initial Setup via Bluetooth

Use the UniFi Mobile app to configure the UniFi Cloud Key.

1. Download the UniFi Mobile app from the AppStore® (iOS)

or Google Play

™

(Android).

2. Enable Bluetooth on your mobile device.

3. Launch the app and hold your mobile device within 1.5m

(5’) of the UniFi Cloud Key.

4. In the Discovered Devices section, tap the icon.

Tap

This

Icon

5. Follow the on-screen instructions.

The username and password you configure in the UniFi Mobile

app will be used for the pre-installed UniFi Controller and UniFi

Video® 4 software.

Software Installation

The UniFi Controller and UniFi Video 4 software applications

are pre-installed on the UniFi CloudKey.

Note: You can run the UniFi Controller or UniFi

Video software, or you can run both applications

simultaneously.

Go to the appropriate section for your software application.

UniFi Controller Software

Use one of the following methods to launch the software:

• If you are using Chrome, go to the Chrome Instructions

section (recommended).

• If you are using a different web browser, go to “Instructions

for Other Web Browsers”.

Chrome Instructions

1. Ensure that your host system is on the same Layer-2

network as the UniFi CloudKey.

2. Launch the Chrome web browser and type

https://unifi.ubnt.com in the address field. Press enter

(PC) or return (Mac).

https://unifi.ubnt.com

3. Enter the username and password for your UBNT account.

Click Sign In.

4. Click Discover Cloud Key.

Note: The default fallback IP address of the UniFi

Cloud Key is 192.168.1.30.

5. If the Ubiquiti® Device Discovery Tool is already installed,

proceed to step 7.

If the tool is not installed, you will be prompted to add it.

Proceed to step 6.

6. To install the tool:

a. Click Install.

b. Click Add app to confirm.

7. The tool will search for the UniFi Cloud Key. Click Adopt in

the Cloud Key’s Actions column to continue.

8. If the Cloud Key firmware is not the latest version, click

Upgrade Firmware to upgrade the firmware.

9. Click Open Controller Wizard to set up the Controller on

the Cloud Key.

10. The UniFi Setup Wizard appears. Follow the on-screen

instructions. For step-by-step instructions, refer to the User

Guide, which is available at

www.ubnt.com/download/unifi

11. After the UniFi Setup Wizard is finished, the browser will be

redirected to the Cloud Login Credentials screen. Enter your

Ubiquiti account email/username and password to enable

cloud access. Alternatively, you can click Register now to

create a Ubiquiti account. Click Enable Cloud Access.

12. Wait for the UniFi Controller to be adopted, and then click

Launch.

The UniFi Controller management interface will appear. You

can manage your UniFi devices and view network statistics

using the UniFi Controller management interface.

For information on configuring and using the UniFi Controller

software, refer to the User Guide located on our website:

www.ubnt.com/download/unifi

Instructions for Other Web Browsers

1. Ensure that your host system is on the same Layer-2

network as the UniFi CloudKey.

2. The UniFi Cloud Key is set to DHCP by default, so it will try

to automatically obtain an IP address. Assign a specific IP

address to the UniFi Cloud Key, or check the DHCP server

for its IP address.

Note: The default fallback IP address of the UniFi

Cloud Key is 192.168.1.30.

3. Launch the web browser. In the address field, type https://

followed by the appropriate IP address. Press enter (PC) or

return (Mac).

4. Click Manage to run the UniFi Setup Wizard.

Note: You can click Configure to change the settings

of the UniFi Cloud Key (refer to”UniFi Cloud Key

Configuration”). The default login is ubnt/ubnt or

root/ubnt.

5. The UniFi Setup Wizard appears. Follow the on-screen

instructions. For step-by-step instructions, refer to the User

Guide, which is available at

www.ubnt.com/download/unifi

After the UniFi Setup Wizard is finished, the UniFi Controller

management interface will appear. Log in with the Admin

Name and Password that you created, and then you can

manage your UniFi devices and view network statistics using

the UniFi Controller management interface.

For information on configuring and using the UniFi Controller

software, refer to the User Guide.

Firmware Update

Note: Updating the UniFi Cloud Key firmware will also

update the UniFi Controller software. We recommend

that you back up your UniFi Controller configuration

before updating the UniFi Cloud Key firmware.

To upgrade the firmware of the UniFi Cloud Key:

1. Ensure that your host system is on the same Layer-2

network as the UniFi CloudKey.

2. The UniFi Cloud Key is set to DHCP by default, so it will try

to automatically obtain an IP address. Assign a specific IP

address to the UniFi Cloud Key, or check the DHCP server

for its IP address.

Note: The default fallback IP address of the UniFi

Cloud Key is 192.168.1.30.

3. Launch the web browser. In the address field, type https://

followed by the appropriate IP address. Press enter (PC) or

return (Mac).

4. Click Configure to change the settings of the UniFi Cloud

Key.

5. Enter the Username and Password (the default login is ubnt/

ubnt). Then click Login.

6. The Main screen will appear. Click Maintenance.

7. You have two options for updating the firmware:

• Check for Updates Click Check for Updates to see if

there is a newer firmware version. If there is, then you

can follow the on-screen instructions to upgrade now.

• Update Manually Click Update Manually to update

the firmware. The Please Confirm Update screen will

appear.

You have two options for a manual update:

• upload file If you have the firmware saved in a

specific location, then click Select File to browse

for the file.

• get file from URL If you know the URL of the

firmware’s location, then enter it in the URL field.

• Update Click Update to proceed with the update.

• Cancel Click Cancel to skip the update.

Pagina se încarcă ...

Ubiquiti UCK-G2-PLUS Ghid de inițiere rapidă

Acest manual este potrivit și pentru

Ubiquiti UCK-G2-PLUS Ghid de inițiere rapidă

în alte limbi

Lucrări conexe

Alte documente