Panasonic TXP65ST60E Manualul proprietarului

TQB0E2323P31

Operating Instructions

Plasma Television

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before operating this product and

retain them for future reference.

The images shown in this manual are for illustrative purposes only.

Please refer to Pan European Guarantee Card if you need to contact your

local Panasonic dealer for assistance.

English

Nederlands

Română

For more detailed instructions, refer to [eHELP]

(Built-in Operating Instructions).

●

How to use [eHELP] (p. 19)

Contents

Be Sure to Read

Important Notice·········································2

Safety Precautions ·····································3

Quick Start Guide

Accessories ··············································7

Connections ·············································· 9

Identifying Controls ··································· 14

First time Auto Setup ································· 17

Using your VIERA

Operations ·············································· 18

How to Use eHELP ··································· 19

Viewing 3D images ··································· 20

Others

FAQs ····················································· 21

Maintenance ··········································· 22

Specifications ·········································· 22

Model No.

TX-P42ST60E

TX-P50ST60E

TX-P55ST60E

TX-P65ST60E

English

2

Important Notice

Do not display any still part of the

image for a long period

In such cases the still part of the image remains dimly

on the plasma screen (“image retention”). This is not

considered a malfunction and is not covered by the

warranty.

Typical still image parts:

●

Channel number, channel logo and other logos

●

Still or moving pictures viewed in

4:3 or 14:9 aspect ratio

●

Video games

To avoid image retention, the screen saver may

be activated (VIERA logo moves) or the on-screen

message may move after a few minutes if no signals

are sent or no operations are performed.

Notice for DVB / Data broadcasting /

IPTV functions

●

This TV is designed to meet the standards (as of

August, 2012) of DVB-T (MPEG2 and MPEG4-

AVC(H.264)) digital terrestrial services and DVB-C

(MPEG2 and MPEG4-AVC(H.264)) digital cable

services.

Consult your local dealer for availability of DVB-T

services in your area.

Consult your cable service provider for availability of

DVB-C services with this TV.

●

This TV may not work correctly with the signal which

does not meet the standards of DVB-T or DVB-C.

●

Not all the features are available depending on the

country, area, broadcaster, service provider and

network environment.

●

Not all CI modules work properly with this TV.

Consult your service provider about the available CI

module.

●

This TV may not work correctly with CI module that is

not approved by the service provider.

●

Additional fees may be charged depending on the

service provider.

●

The compatibility with future services is not

guaranteed.

●

Check the latest information on the available

services at the following website. (English only)

http://panasonic.net/viera/support

Panasonic does not guarantee operation and

performance of peripheral devices made by other

manufacturers; and we disclaim any liability or damage

arising from operation and/or performance from usage

of such other maker’s peripheral devices.

This product is licensed under the AVC patent portfolio

license for the personal and non-commercial use of a

consumer to (i) encode video in compliance with the

AVC Standard (“AVC Video”) and/or (ii) decode AVC

Video that was encoded by a consumer engaged in

a personal and non-commercial activity and/or was

obtained from a video provider licensed to provide

AVC Video. No license is granted or shall be implied

for any other use.

Additional information may be obtained from MPEG

LA, LLC.

See http://www.mpegla.com.

●

For the information of the trademarks, refer to [eHELP]

(Support > Licence).

English

3

Safety Precautions

To help avoid risk of electrical shock, fire, damage or

injury, please follow the warnings and cautions below:

■ Mains plug and lead

Warning

If you detect anything unusual,

immediately remove the mains

plug.

●

This TV is designed to operate on AC 220-240 V, 50 /

60 Hz.

●

Insert the mains plug fully into the socket outlet.

●

Ensure that the mains plug is easily accessible.

●

Disconnect the mains plug when cleaning the TV.

●

Do not touch the mains plug with wet hands.

●

Do not damage the mains lead.

•

Do not place a heavy object

on the lead.

•

Do not place the lead near a

high temperature object.

•

Do not pull on the lead. Hold

onto the mains plug body

when disconnecting the plug.

•

Do not move the TV with the lead plugged into a

socket outlet.

•

Do not twist the lead, bend it excessively or stretch it.

•

Do not use a damaged mains plug or socket outlet.

•

Ensure the TV does not crush the mains lead.

●

Do not use any mains lead other than that provided with

this TV.

●

Ensure the earth pin on the mains plug is securely

connected to prevent electrical shock.

•

An apparatus with CLASS I construction shall be

connected to a mains socket outlet with a protective

earth connection.

■ Take care

Warning

●

Do not remove covers and never modify

the TV yourself as live parts are accessible

when they are removed. There are no user

serviceable parts inside.

●

Do not expose the TV to rain

or excessive moisture. This TV

must not be exposed to dripping

or splashing water and objects

filled with liquid, such as vases,

must not be placed on top of or

above the TV.

●

Do not insert foreign objects into the TV through the air

vents.

Rovi Corporation and/or its subsidiaries and related

affiliates are not in any way liable for the accuracy or

availability of the program schedule information or

other data in the GUIDE Plus+/Rovi Guide system

and cannot guarantee service availability in your area.

In no event shall Rovi Corporation and/or its related

affiliates be liable for any damages in connection with

the accuracy or availability of the program schedule

information or other data in the GUIDE Plus+/Rovi

Guide system.

“Full HD 3D Glasses™” Logo indicates compatibility

between TV products and 3D Eyewear which are

compliant with the “Full HD 3D Glasses™” format, and

does not indicate picture quality of TV products.

English

4

●

Do not use an unapproved pedestal / mounting

equipment. Be sure to ask your local Panasonic dealer

to perform the setup or installation of approved wall-

hanging brackets.

●

Do not apply strong force or impact to the display panel.

●

Do not place the TV on sloped

or unstable surfaces, and ensure

that the TV does not hang over

the edge of the base.

●

Do not expose the TV to direct

sunlight and other sources of

heat.

To prevent the

spread of fire, keep

candles or other

open flames away

from this product at

all times

■ Dangerous part / Small object

Warning

●

This product contains possibly dangerous parts such

as plastic bags, that can be breathed in or swallowed

by young children accidentally. Keep these parts out of

reach of young children.

●

Do not allow children to handle

any small objects such as SD

Card. The small object could be

swallowed by young children.

Remove SD Card immediately

after use and store out of reach of

young children.

●

3D Eyewear and Electronic Touch Pen contain

small parts that can be swallowed by young children

accidentally. Keep these parts out of reach of young

children.

■ Pedestal

Warning

●

Do not disassemble or modify the pedestal.

Caution

●

Do not use any pedestal other than the one provided

with this TV.

●

Do not use the pedestal if it becomes warped or

physically damaged. If this occurs, contact your nearest

Panasonic dealer immediately.

●

During setup, make sure that all screws are securely

tightened.

●

Ensure that the TV does not suffer any impact during

installation of the pedestal.

●

Ensure that children do not climb onto the pedestal.

●

Install or remove the TV from the pedestal with at least

two people.

●

Install or remove the TV by the specified procedure.

■ Radio wave

Warning

●

Do not use the TV, 3D Eyewear and Electronic Touch

Pen in any medical institutions or locations with medical

equipment. Radio waves may interfere with the medical

equipment and cause accidents due to the malfunction.

●

Do not use the TV, 3D Eyewear and Electronic Touch

Pen near any automatic control equipment such as

automatic doors or fire alarms. Radio waves may

interfere with the automatic control equipment and

cause accidents due to the malfunction.

●

Keep the distance at least 22 cm from the TV, 3D

Eyewear and Electronic Touch Pen when you have a

cardiac pacemaker. Radio waves may interfere with the

operation of the pacemaker.

●

Do not disassemble or alter the TV, 3D Eyewear and

Electronic Touch Pen in any way.

■ Built-in wireless LAN

Caution

●

Do not use the built-in wireless LAN to connect to any

wireless network (SSID

*

) for which you do not have

usage rights. Such networks may be listed as a result

of searches. However, using them may be regarded as

illegal access.

*

SSID is a name for identifying a particular wireless

network for transmission.

●

Do not subject the built-in wireless LAN to high

temperatures, direct sunlight or moisture.

●

Data transmitted and received over radio waves may be

intercepted and monitored.

●

The built-in wireless LAN uses 2.4 GHz and 5 GHz

frequency bands. To avoid malfunctions or slow

response caused by radio wave interference, keep the

TV away from the devices such as other wireless LAN

devices, microwaves, mobile phones and the devices

that use 2.4 GHz and 5 GHz signals when using the

built-in wireless LAN.

●

When noises occur due to the static electricity, etc.,

the TV might stop operating for the protection of the

devices. In this case, turn the TV off with Mains power

On / Off switch, then turn it on again.

●

Additional information for the wireless LAN and access

point may be on the following website. (English only)

http://panasonic.net/viera/support

■ Bluetooth

®

wireless technology

Caution

●

The TV, 3D Eyewear and Electronic Touch Pen use

the 2.4 GHz radio frequency ISM band (Bluetooth

®

).

To avoid malfunctions or slow response caused by

radio wave interference, keep the TV, 3D Eyewear and

Electronic Touch Pen away from the devices such as

other wireless LAN devices, other Bluetooth devices,

microwaves, mobile phones and the devices that use

2.4 GHz signal.

English

5

■ Ventilation

Caution

Allow sufficient space around the TV in order to help

prevent excessive heat, which could lead to early failure

of some electronic components.

Minimum distance:

(cm)

10

7

●

Ventilation should not be

impeded by covering the

ventilation openings with items

such as newspapers, tablecloths

and curtains.

●

Whether you are using a pedestal or not, always ensure

the vents at the bottom of the TV are not blocked and

there is sufficient space to enable adequate ventilation.

■ Moving the TV

Caution

Before moving the TV, disconnect all cables.

●

The TV is heavy. Move the

TV with at least two people.

Support as shown to avoid

injury by the TV tipping or

falling.

●

Transport only in upright position. Transporting the TV

with its display panel facing upwards or downwards

may cause damage to the internal circuitry.

■ When not in use for a long time

Caution

This TV will still consume some power even in the Off

mode, as long as the mains plug is still connected to a

live socket outlet.

●

Remove the mains plug from the wall socket when the

TV is not in use for a prolonged period of time.

■ Excessive volume

Caution

●

Do not expose your ears to

excessive volume from the

headphones. Irreversible

damage can be caused.

●

If you hear a drumming noise in your ears, turn down

the volume or temporarily stop using the headphones.

■ Battery for the Remote Control /

3D Eyewear / Electronic Touch Pen

Caution

●

Incorrect installation may cause battery leakage,

corrosion and explosion.

●

Replace only with the same or equivalent type.

●

Do not mix old and new batteries.

●

Do not mix different battery types (such as alkaline and

manganese batteries).

●

Do not use rechargeable batteries (Ni-Cd, etc.).

●

Do not burn or break up batteries.

●

Do not expose batteries to excessive heat such as

sunshine, fire or the like.

●

Make sure you dispose of batteries correctly.

●

Remove the battery from the unit when not using for

a prolonged period of time to prevent battery leakage,

corrosion and explosion.

■ Electronic Touch Pen Use

Warning

●

The TV may be hot. Do not touch it continuously to

prevent low temperature burn.

Caution

●

Do not forcibly hit or pick the TV screen with the

Electronic Touch Pen to prevent the TV from falling

over.

●

Touch the TV screen only with the tip of the Electronic

Touch Pen, do not move the tip with exerting pressure

on, or do not move the tip fast to prevent the scratch of

the screen.

●

Stop using the Electronic Touch Pen immediately if you

experience any redness, pain or skin irritation. In rare

cases, the materials used in the Electronic Touch Pen

may cause an allergic reaction.

●

Use the Electronic Touch Pen taking a break

sometimes. Guideline for continuous use is around

1 hour to protect against eyestrain or physical

deconditioning.

●

Do not use the Electronic Touch Pen at high

temperatures. Always keep the Electronic Touch Pen in

a cool and dry place.

■ 3D Eyewear Use

Caution

●

Use the 3D Eyewear only for the intended purpose and

nothing else.

●

Do not move around while wearing the 3D Eyewear to

avoid falling or accidental injury.

●

Do not drop, bend, exert pressure on, or step on the 3D

Eyewear.

●

Be careful of the tips of the frame when putting on the

3D Eyewear.

●

Be careful not to trap your fingers in the hinge section

of the 3D Eyewear.

●

Do not use the 3D Eyewear if it is physically damaged.

●

If you suffer from any eyesight problems (short / far-

sighted, astigmatism, eyesight differences in left and

right), ensure that you correct your vision before using

the 3D Eyewear. The supplied 3D Eyewear can be worn

over vision correction glasses.

English

6

●

Stop using the 3D Eyewear immediately if you

experience any redness, pain or skin irritation around

the nose or temples. In rare cases, the materials used

in the 3D Eyewear may cause an allergic reaction.

●

Do not use the 3D Eyewear at high temperatures.

Always keep the 3D Eyewear in a cool and dry place.

●

Stop using the 3D Eyewear immediately if a malfunction

or fault occurs.

■ Viewing 3D Images

Caution

●

Pay special attention when children are viewing 3D

images. 3D images should not be viewed by children

younger than about 6 years old, as a guideline.

All children must be fully supervised by parents or

guardians who must ensure their safety and health

while they are viewing 3D images.

●

Stop viewing 3D images immediately if you feel tired,

feel unwell, experience any other uncomfortable

sensation or clearly see double images. Take an

appropriate break before continuing to view. When you

set the 3D effect by using [3D Adjustment], take into

account that the vision of 3D images varies among

different individuals.

●

Do not view 3D images if you have a history of

oversensitivity to light, heart problems or any other

medical conditions.

●

When viewing 3D images, your sense of distance may

be tricked or go wrong. Be careful not to hit the TV

screen or other people unintentionally. Ensure there

are no breakable objects around you to avoid any

accidental damage or injury.

●

Do not view 3D images from a distance shorter than

recommended. The recommended viewing distance is

at least 3 times of the image height.

42-inch model

: 1.6 m or more

50-inch model

: 1.9 m or more

55-inch model

: 2.1 m or more

65-inch model

: 2.4 m or more

When black bands at the top and bottom of the screen

are displayed, such as movies, view the screen from

a distance at least 3 times the height of the actual

image. (That makes the distance shorter than the

recommended values above.)

English

7

Accessories

Remote Control

(p. 14)

●

N2QAYB000829

Batteries (2)

●

R6

(p. 14)

Pedestal

(see below)

42-inch model

55-inch model

50-inch model

65-inch model

Mains lead

(p. 9)

3D Eyewear

(p. 20)

Electronic Touch Pen

(with R03 battery)

(p. 15)

Cable tie

(p. 13)

AV1 (SCART) adaptor

(p. 10)

Ferrite core for

LAN cable (2)

(Large size)

(p. 11)

Ferrite core for

headphones

(Small size)

(p. 12)

Use the Ferrite cores to comply with the EMC standard.

Operating Instructions

Pan European Guarantee Card

●

Accessories may not be placed all together. Take care not to throw them away unintentionally.

●

For the information of optional accessories, refer to [eHELP] (Support > Optional accessories).

Assembling / Removing the pedestal

Assembly screw

(black)

(7)

(12)

42-inch model

50-inch model

55-inch model

65-inch model

M5 × 16

Bracket

42-inch model

50-inch model

55-inch model

65-inch model

Base

Assembly screw

(black)

(5)

42-inch model

50-inch model

M4 × 10

Neck

42-inch model

50-inch model

55-inch model

65-inch model

Cover

42-inch model

50-inch model

English

8

■ Assembling the pedestal

5

A

B

F

1

2

3

4

6

B

A

C

D

E

42-inch model

50-inch model

42-inch model

50-inch model

55-inch model

65-inch model

42-inch model

50-inch model

55-inch model

65-inch model

■ Adjusting the panel to your desired angle

42-inch model

50-inch model

●

Do not place any objects within the full rotation range.

15°

(View from the top)

42-inch model

50-inch model

Secure the base as shown below to prevent the TV

from falling over.

●

The place where the base is secured should be thick

enough and made of hard material.

Commercially available screw

(not supplied)

Diameter: 3 mm

Length: 25 - 30 mm

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Remove the assembly screws

(

42-inch model

50-inch model

) / (

55-inch model

65-inch model

) from the

TV.

2 Pull out the pedestal from the TV.

3 Remove the assembly screw from the cover.

42-inch model

50-inch model

4 Pull out the cover.

42-inch model

50-inch model

5 Remove the assembly screws from the bracket.

6 Remove the assembly screws from the back of the base and pull out the neck.

English

9

Connections

●

External equipment and cables shown are not supplied with this TV.

●

Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.

●

Check the type of terminals and cable plugs are correct when connecting.

●

Always use a fully wired SCART or HDMI cable.

●

Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.

Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.

●

Also read the manual of the equipment being connected.

Terminals

8 7 9

4

6

5

2

1

3

10

1

CI slot (p. 12)

2

SD Card slot

3

Headphone jack (p. 12)

4

USB 1 - 2 port

5

HDMI1 - 3 (p. 10, 12)

6

DIGITAL AUDIO

7

ETHERNET (p. 11)

8

Terrestrial / cable terminal

(see below)

9

AV1 (SCART) (p. 10)

10

AV2 (COMPONENT / VIDEO)

(p. 11, 12)

Basic connections

Mains lead and aerial

■ Mains lead

Push until both side

tabs click

Make sure that

the mains lead is

securely fixed.

To remove from the TV:

tabs

Press both tabs and pull

on mains connector to

release

Cable

■ DVB-C, DVB-T, Analogue

AC 220-240 V

50 / 60 Hz

Mains lead

(supplied)

Terrestrial aerial

RF cable

English

10

AV devices

■ DVD Recorder / VCR

TV

DVD Recorder / VCR

Cable

SCART cable

RF cable

Terrestrial aerial

RF cable

AV1 (SCART)

adaptor (supplied)

■ DVD Recorder / VCR and Set top box

TV

Set top box

HDMI cable

SCART cable

DVD Recorder / VCR

Terrestrial aerial

RF cable

RF Cable

Cable

AV1 (SCART)

adaptor (supplied)

English

11

Network

●

To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network

environment. If you do not have any broadband network services, please consult your retailer for assistance.

●

Prepare the internet environment for wired connection or wireless connection.

●

Setup of the network connection will start when first using the TV. (p. 17)

■ Wired connection

TV

Internet environment

*

Less than 10 cm

LAN cable (Unshielded)

●

Use the Unshielded Twist Pair (UTP) LAN cable.

Ferrite core - Large size (supplied)

Installing the Ferrite core

Pull back the tabs

(in two places)

Wind the cable twice Close

■ Wireless connection

Internet environment

Access point

Built-in wireless LAN

Other connections

■ DVD player

(COMPONENT equipment)

TV

DVD Player

(Listening)

(Viewing)

English

12

■ Camcorder / Game equipment

(VIDEO equipment)

TV

Game equipment

(Viewing)

(Listening)

Camcorder

■ Amplifier (to listen with speakers)

TV

HDMI cable

Amplifier with

speaker system

External equipment

(DVD Player, etc.)

●

Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio

Return Channel) function.

As for an amplifier without ARC function, use DIGITAL AUDIO.

●

To enjoy the sound from the external equipment in multi-channel sound (e.g. Dolby Digital 5.1ch), connect the

equipment to the amplifier. For the connections, read the manuals of the equipment and amplifier.

■ Headphones

TV

(M3 stereo mini plug)

●

To adjust volume

[Headphone Volume] in the

Sound Menu

Less than

10 cm

Ferrite core - Small size (supplied)

Installing the Ferrite core

Pull back the tab Wind the cable twice Close

■ Common Interface

TV

CI module

●

If a view card and a card reader come as a set, first insert the card

reader, then insert the view card into the card reader.

●

Insert the module in the correct direction.

English

13

Types of connectable equipment to each terminal

Features

Terminal

AV1

*

1

AV2

DIGITAL

AUDIO

ETHERNET

HDMI 1 - 3

USB 1 - 2

COMPONENT VIDEO

To record / play back videocassettes / DVDs

(VCR / DVD Recorder)

To watch 3D contents (Blu-ray Disc Player)

To watch satellite broadcasts (Set top box)

To watch DVDs (DVD Player)

To watch camcorder images (Video camera)

To play games (Game equipment)

To use amplifier with speaker system

*

2

To use network services

*

3

VIERA Link

: Recommended Connection

*

1: To connect the equipment, the SCART adaptor (supplied) is necessary.

*

2: Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio

Return Channel) function.

*

3: Use USB 1 port for connecting the Communication Camera.

Using the cable tie (supplied)

Attach the cable tie Bundle the cables

hole

Insert the cable

tie in a hole

hooks

Set the tip in

the hooks

To remove from the TV: To loosen:

Keep pushing

both side snaps

snaps

knob

Keep pushing

the knob

●

Do not bundle the RF cable and mains lead

together (could cause distorted image).

●

Fix cables with the cable tie as necessary.

●

When using the optional accessory, follow the

option’s assembly manual to fix cables.

English

1

14

15

18

20

21

22

23

16

24

2

4

5

6

19

10

3

17

7

8

9

11

12

13

14

Identifying Controls

Remote Control

1

Standby On / Off switch

2

3D button

●

Switches the view between 2D and 3D.

3

[Main Menu]

●

Press to access Picture, Sound, Network, Timer,

Setup and Help Menus.

4

Teletext button

5

Information

●

Displays channel and programme information.

6

APPS

●

Displays [APPS list] (applications list).

7

OK

●

Confirms selections and choices.

●

Press after selecting channel positions to quickly

change channel.

●

Displays the Channel List.

8

[Option Menu]

●

Easy optional setting for viewing, sound, etc.

9

Coloured buttons

(red-green-yellow-blue)

●

Used for the selection, navigation and operation of

various functions.

10

Volume Up / Down

11

Numeric buttons

●

Changes channel and teletext pages.

●

Sets characters.

●

When in Standby mode, switches TV on.

12

[eHELP]

●

Displays [eHELP] (Built-in Operating Instructions).

13

Input mode selection

●

TV - switches to DVB-C / DVB-T / Analogue mode.

●

AV - switches to AV input mode from Input

Selection list.

14

Aspect

●

Changes aspect ratio.

15

Subtitles

●

Displays subtitles.

16

Exit

●

Returns to [Home Screen].

17

HOME

●

Displays [Home Screen].

18

TV Guide

●

Displays Electronic Programme Guide.

19

Cursor buttons

●

Makes selections and adjustments.

20

Return

●

Returns to the previous menu / page.

21

Channel Up / Down

22

Sound Mute On / Off

23

Last view

●

Switches to previously viewed channel or input

mode.

24

Operations for contents, connected equipment,

etc.

■ Installing / Removing batteries

Pull open

Hook

Note the correct polarity

(+ or -)

Close

English

15

Electronic Touch Pen

You can paint or play games on the TV screen with the Electronic Touch Pen.

●

The Electronic Touch Pen can be used by pairing to the TV in [Auto Setup] (p. 17) or [Touch Pen Setup].

For more information, refer to [eHELP] (Functions > Electronic Touch Pen > Touch Pen Setup).

1

2

3

4

2

Indicator lamp

●

Lights for approx. 2 seconds when turned on, and

then blinks at approx. 2-second intervals.

●

Up to 2 pieces of the Electronic Touch Pen (Pen1 /

Pen2) can be used simultaneously.

Indicator blinks:

Pen1: Red

Pen2: Green

●

Also lights or blinks when pairing the Electronic

Touch Pen to the TV.

●

Blinks 5 times consecutively at power-on when the

battery level is low.

3

Unit cover

4

Pen tip

Press the pen tip on this side of the Electronic Touch

Pen against the TV screen for use.

1

Power button

To turn on: Press once

To turn off: Press and hold 2 seconds or longer

●

Automatically turned off if unused for 5 minutes.

■ Inserting the battery

1

Turn and slide the unit cover until the entire

shape of the battery is visible.

2

Insert the R03 battery, and then slide and turn the

unit cover to close until it clicks.

■ How to hold the Electronic Touch Pen

●

Touch the tip of the Electronic Touch Pen vertically onto

the TV screen and press it lightly.

Note

●

Do not use devices such as mobile phones or personal transceivers that emit strong electromagnetic waves near the

Electronic Touch Pen as this may cause the Electronic Touch Pen to malfunction.

●

Use the Electronic Touch Pen where there is no interference from other Bluetooth devices.

●

For more information, refer to [eHELP] (Functions > Electronic Touch Pen).

English

16

Indicator / Control panel

●

When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to

highlight the pressed button.

Using the On Screen Displays - Operation guide

Many features available on this TV can be accessed via the On Screen Display menu.

■ Operation guide

Operation guide will help your operation by using the

remote control.

Example: [Sound Menu]

1/2

0

11

0

Mode

Standard

Bass

Treble

Equaliser

Headphone Volume

Surround

Auto Gain Control

Volume Correction

Off

Main Menu

Picture

Sound

Network

Timer

Setup

Select

Selects your favourite sound

mode.

Page up

Change

RETURN

Page down

Operation guide

S

elec

t

S

elects

y

our

f

avourite sound

mode

.

Pa

g

eu

p

C

han

ge

R

ET

U

R

N

Page

dow

n

Balance

Help

Bass Boost Off

■ How to use remote control

Open the main menu

Move the cursor / select from a range of options /

select the menu item (up and down only) / adjust

levels (left and right only)

Access the menu / store settings after adjustments

have been made or options have been set

Return to the previous menu

Exit the menu system and return to [Home Screen]

1

Input mode selection

●

Press repeatedly until you reach the desired

mode.

[Main Menu]

●

Press and hold for about 3 seconds to display

main menu.

OK (when in the menu system)

2

Channel Up / Down

Cursor Up / Down (when in the menu system)

3

Volume Up / Down

Cursor Left / Right (when in the menu system)

4

Mains power On / Off switch

●

Use to switch the mains power.

5

Remote control signal receiver

●

Do not place any objects between the TV remote

control signal receiver and remote control.

6

Ambient sensor

●

Senses brightness to adjust picture quality when

[Ambient Sensor] in the Picture Menu is set to

[On].

7

Power LED

Red: Standby

Green: On

●

The LED blinks when the TV receives a command

from the remote control.

Rear side of the TV

3

1

4

2

5 6 7

English

17

First time Auto Setup

Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time.

●

These steps are not necessary if the setup has been completed by your local dealer.

●

Please complete connections (p. 9 - 13) and settings (if necessary) of the connected equipment before starting Auto

Setup. For details of settings for the connected equipment, read the manual of the equipment.

1

Plug the TV into mains socket and turn power on

●

Takes a few seconds to be displayed.

2

Select the following items

Set up each item by following the on-screen instructions.

Select the language

Select [Home]

Select [Home] viewing environment to use in your home environment.

●

[Shop] is for shop display.

●

To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.

Set up the network connection

Select your country

●

Depending on the country you select, select your Region or store the Child Lock-PIN number (“0000” cannot

be stored).

Tick the TV signal mode to tune, and then select [Start Auto Setup]

: tune (search for the available channels)

: skip tuning

●

Auto Setup screen varies depending on the country and the signal mode you select.

●

[DVB-C Network Settings]

Normally set [Frequency] and [Network ID] to [Auto].

If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider

with numeric buttons.

Pair the Electronic Touch Pen

3

Select the type of [Home Screen]

The demonstration to explain how to use [my Home Screen] is displayed. Confirm the demonstration by

following the on-screen instructions, and then select the desired [Home Screen].

Example: [Home Screen Selection] Example: [TV Home Screen]

●

[my Home Screen] is the start-up screen when the TV is turned on or the HOME button is pressed.

Auto Setup is now complete and your TV is ready for viewing.

If tuning has failed, check the connection of the network, RF cable, and then follow the on-screen instructions.

Note

●

The TV will automatically go into Standby mode when no operation is performed for 4 hours if [Auto Standby] in the

Timer Menu is set to [On].

●

The TV will automatically go into Standby mode when no signal is received and no operation is performed for

10 minutes if [No signal Power off] in the Timer Menu is set to [On].

●

To retune all channels [Auto Setup] in [Tuning Menu] (Setup Menu)

●

To add the available TV signal mode later [Add TV Signal] in [Tuning Menu] (Setup Menu)

●

To initialise all settings [Shipping Condition] in [System Menu] (Setup Menu)

English

18

Operations

Turn power on

(TV)

or

●

Mains power On / Off switch should be on. (p. 16)

(Remote Control)

The last viewed [Home Screen] is displayed.

Example: [TV Home Screen] Example: Selected content screen

●

To return to [Home Screen] at any time

●

You can set up or make [Home Screen] to display desired information, to access specific features easily, to select the

default [Home Screen], etc. For details, follow the on-screen instructions or refer to [eHELP] (Watching > my Home

Screen).

Watching TV

1

Select the TV viewer from [Home Screen]

select

access

2

Select the mode

●

Selectable modes vary depending on the tuned channels.

TV Selection

DVB-C

DVB-T

Analogue

select

access

●

You can also select the mode by pressing the TV button repeatedly.

●

If [TV Selection] menu is not displayed, press the TV button to switch the mode.

3

Select a channel

up

down

or

●

To select 2 or more-digit channel position number, e.g. 399

To access each feature

Access [APPS list] and select a feature

Example: [APPS list]

●

APPS is the applications (features) of the TV.

●

For operations of each feature and the setup of [APPS list], follow the

on-screen instructions or refer to [eHELP] (Functions > APPS list).

English

19

How to Use eHELP

[eHELP] is the detailed operating instructions built into the TV, and helps you to get more understanding of the

operations for each feature.

1

Display [eHELP]

or

[Help]

[eHELP]

●

[Read first] will be displayed on the top page. Please read these instructions fully to get more understanding of

the operation in [eHELP].

●

If this is not the first time to view [eHELP] from when the TV is turned on, the confirmation screen is displayed

to select whether [First Page] or [Last Page].

2

Select the category and item

Category field

Item field

Sub item field

Description

select category

access

select item

access

select sub item

access

●

To return to the previous field

●

To scroll the description (if more than 1 page)

While the description is highlighted

●

To display the menu related to the description (only for some descriptions)

(red)

English

20

Viewing 3D images

You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D

Eyewear.

“Accessories” (p. 7)

●

The 3D Eyewear must be worn to view 3D images.

●

This TV supports [Frame Sequential]

*

, [Side by Side] and [Top and Bottom] 3D formats.

*

: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately

played back.

3D Eyewear

Use the supplied 3D Eyewear or Panasonic 3D Eyewear that has this logo and supports Bluetooth

®

wireless

technology.

●

“Full HD 3D Glasses™” logo indicates products that are compatible with the active shutter 3D

glasses technology standards licensed by the Full HD 3D Glasses Initiative. The RF mark on

the logo means the wireless system (Bluetooth

®

wireless technology), and you can use the 3D

Eyewear and the TV that have the same mark together.

Note

●

Do not exert pressure on or scratch the lens of the 3D Eyewear.

●

Do not use devices such as mobile phones or personal transceivers that emit strong electromagnetic waves near the

3D Eyewear as this may cause the 3D Eyewear to malfunction.

●

Do not wear the 3D Eyewear when watching anything other than 3D images. Liquid crystal displays (such as

computer screens, digital clocks or calculators, etc.) may be difficult to see while wearing the 3D Eyewear.

First registration

Perform the first registration when first using the 3D Eyewear with this TV.

1 Turn the TV on

2 Press the button for about 1 second to turn the 3D Eyewear on

●

The lamp lights for about 2 seconds and then flashes.

●

The 3D Eyewear will be turned on and start registration.

●

Place the 3D Eyewear within 50 cm from the TV while registration in progress.

3 After the registration is successfully completed, the 3D Eyewear will reconnect with TV automatically when

the 3D Eyewear is turned on near the TV in 3D mode

Registration again

When connection with the registered TV fails, or when using with another TV, re-register the 3D Eyewear.

1 Turn the TV on

2 Within 50 cm from the TV, press Power button until lamp lights, then release it to start registration

3 After the registration is successfully completed, the 3D Eyewear will reconnect with TV automatically when the 3D

Eyewear is turned on near the TV in 3D mode

To view the 3D images

■ Playing back 3D-compatible Blu-ray disc (Frame Sequential format)

●

Connect the 3D-compatible player via a fully wired HDMI compliant cable. (If you use the non 3D-compatible player,

the images will be displayed in 2D mode.)

●

If the input mode is not switched automatically, select the input mode connected to the player using the AV button.

■ 3D-supported broadcast

●

Please consult the suppliers of contents or programmes for availability of this service.

■ 3D photos and 3D videos taken by 3D-compatible Panasonic products

●

Available in Media Player and Network services.

■ 2D images converted to 3D

●

Press the 3D button and set to [2D 3D] mode in [3D Mode Selection].

Preparations

Ensure that the registration of the 3D Eyewear has been completed.

Pagina se încarcă...

Panasonic TXP65ST60E Manualul proprietarului

Panasonic TXP65ST60E Manualul proprietarului

în alte limbi

Lucrări înrudite

Alte documente