Panasonic TX-P50ST60 Manualul proprietarului

Tip
Manualul proprietarului
TQB0E2323P31
Operating Instructions
Plasma Television
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating this product and
retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Please refer to Pan European Guarantee Card if you need to contact your
local Panasonic dealer for assistance.
English
Nederlands
Română
For more detailed instructions, refer to [eHELP]
(Built-in Operating Instructions).
How to use [eHELP] (p. 19)
Contents
Be Sure to Read
Important Notice·········································2
Safety Precautions ·····································3
Quick Start Guide
Accessories ··············································7
Connections ·············································· 9
Identifying Controls ··································· 14
First time Auto Setup ································· 17
Using your VIERA
Operations ·············································· 18
How to Use eHELP ··································· 19
Viewing 3D images ··································· 20
Others
FAQs ····················································· 21
Maintenance ··········································· 22
Specifications ·········································· 22
Model No.
TX-P42ST60E
TX-P50ST60E
TX-P55ST60E
TX-P65ST60E
English
2
Important Notice
Do not display any still part of the
image for a long period
In such cases the still part of the image remains dimly
on the plasma screen (“image retention”). This is not
considered a malfunction and is not covered by the
warranty.
Typical still image parts:
Channel number, channel logo and other logos
Still or moving pictures viewed in
4:3 or 14:9 aspect ratio
Video games
To avoid image retention, the screen saver may
be activated (VIERA logo moves) or the on-screen
message may move after a few minutes if no signals
are sent or no operations are performed.
Notice for DVB / Data broadcasting /
IPTV functions
This TV is designed to meet the standards (as of
August, 2012) of DVB-T (MPEG2 and MPEG4-
AVC(H.264)) digital terrestrial services and DVB-C
(MPEG2 and MPEG4-AVC(H.264)) digital cable
services.
Consult your local dealer for availability of DVB-T
services in your area.
Consult your cable service provider for availability of
DVB-C services with this TV.
This TV may not work correctly with the signal which
does not meet the standards of DVB-T or DVB-C.
Not all the features are available depending on the
country, area, broadcaster, service provider and
network environment.
Not all CI modules work properly with this TV.
Consult your service provider about the available CI
module.
This TV may not work correctly with CI module that is
not approved by the service provider.
Additional fees may be charged depending on the
service provider.
The compatibility with future services is not
guaranteed.
Check the latest information on the available
services at the following website. (English only)
http://panasonic.net/viera/support
Panasonic does not guarantee operation and
performance of peripheral devices made by other
manufacturers; and we disclaim any liability or damage
arising from operation and/or performance from usage
of such other maker’s peripheral devices.
This product is licensed under the AVC patent portfolio
license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the
AVC Standard (“AVC Video”) and/or (ii) decode AVC
Video that was encoded by a consumer engaged in
a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide
AVC Video. No license is granted or shall be implied
for any other use.
Additional information may be obtained from MPEG
LA, LLC.
See http://www.mpegla.com.
For the information of the trademarks, refer to [eHELP]
(Support > Licence).
English
3
Safety Precautions
To help avoid risk of electrical shock, fire, damage or
injury, please follow the warnings and cautions below:
Mains plug and lead
Warning
If you detect anything unusual,
immediately remove the mains
plug.
This TV is designed to operate on AC 220-240 V, 50 /
60 Hz.
Insert the mains plug fully into the socket outlet.
Ensure that the mains plug is easily accessible.
Disconnect the mains plug when cleaning the TV.
Do not touch the mains plug with wet hands.
Do not damage the mains lead.
Do not place a heavy object
on the lead.
Do not place the lead near a
high temperature object.
Do not pull on the lead. Hold
onto the mains plug body
when disconnecting the plug.
Do not move the TV with the lead plugged into a
socket outlet.
Do not twist the lead, bend it excessively or stretch it.
Do not use a damaged mains plug or socket outlet.
Ensure the TV does not crush the mains lead.
Do not use any mains lead other than that provided with
this TV.
Ensure the earth pin on the mains plug is securely
connected to prevent electrical shock.
An apparatus with CLASS I construction shall be
connected to a mains socket outlet with a protective
earth connection.
Take care
Warning
Do not remove covers and never modify
the TV yourself as live parts are accessible
when they are removed. There are no user
serviceable parts inside.
Do not expose the TV to rain
or excessive moisture. This TV
must not be exposed to dripping
or splashing water and objects
filled with liquid, such as vases,
must not be placed on top of or
above the TV.
Do not insert foreign objects into the TV through the air
vents.
Rovi Corporation and/or its subsidiaries and related
affiliates are not in any way liable for the accuracy or
availability of the program schedule information or
other data in the GUIDE Plus+/Rovi Guide system
and cannot guarantee service availability in your area.
In no event shall Rovi Corporation and/or its related
affiliates be liable for any damages in connection with
the accuracy or availability of the program schedule
information or other data in the GUIDE Plus+/Rovi
Guide system.
“Full HD 3D Glasses™” Logo indicates compatibility
between TV products and 3D Eyewear which are
compliant with the “Full HD 3D Glasses™” format, and
does not indicate picture quality of TV products.
English
4
Do not use an unapproved pedestal / mounting
equipment. Be sure to ask your local Panasonic dealer
to perform the setup or installation of approved wall-
hanging brackets.
Do not apply strong force or impact to the display panel.
Do not place the TV on sloped
or unstable surfaces, and ensure
that the TV does not hang over
the edge of the base.
Do not expose the TV to direct
sunlight and other sources of
heat.
To prevent the
spread of fire, keep
candles or other
open flames away
from this product at
all times
Dangerous part / Small object
Warning
This product contains possibly dangerous parts such
as plastic bags, that can be breathed in or swallowed
by young children accidentally. Keep these parts out of
reach of young children.
Do not allow children to handle
any small objects such as SD
Card. The small object could be
swallowed by young children.
Remove SD Card immediately
after use and store out of reach of
young children.
3D Eyewear and Electronic Touch Pen contain
small parts that can be swallowed by young children
accidentally. Keep these parts out of reach of young
children.
Pedestal
Warning
Do not disassemble or modify the pedestal.
Caution
Do not use any pedestal other than the one provided
with this TV.
Do not use the pedestal if it becomes warped or
physically damaged. If this occurs, contact your nearest
Panasonic dealer immediately.
During setup, make sure that all screws are securely
tightened.
Ensure that the TV does not suffer any impact during
installation of the pedestal.
Ensure that children do not climb onto the pedestal.
Install or remove the TV from the pedestal with at least
two people.
Install or remove the TV by the specified procedure.
Radio wave
Warning
Do not use the TV, 3D Eyewear and Electronic Touch
Pen in any medical institutions or locations with medical
equipment. Radio waves may interfere with the medical
equipment and cause accidents due to the malfunction.
Do not use the TV, 3D Eyewear and Electronic Touch
Pen near any automatic control equipment such as
automatic doors or fire alarms. Radio waves may
interfere with the automatic control equipment and
cause accidents due to the malfunction.
Keep the distance at least 22 cm from the TV, 3D
Eyewear and Electronic Touch Pen when you have a
cardiac pacemaker. Radio waves may interfere with the
operation of the pacemaker.
Do not disassemble or alter the TV, 3D Eyewear and
Electronic Touch Pen in any way.
Built-in wireless LAN
Caution
Do not use the built-in wireless LAN to connect to any
wireless network (SSID
*
) for which you do not have
usage rights. Such networks may be listed as a result
of searches. However, using them may be regarded as
illegal access.
*
SSID is a name for identifying a particular wireless
network for transmission.
Do not subject the built-in wireless LAN to high
temperatures, direct sunlight or moisture.
Data transmitted and received over radio waves may be
intercepted and monitored.
The built-in wireless LAN uses 2.4 GHz and 5 GHz
frequency bands. To avoid malfunctions or slow
response caused by radio wave interference, keep the
TV away from the devices such as other wireless LAN
devices, microwaves, mobile phones and the devices
that use 2.4 GHz and 5 GHz signals when using the
built-in wireless LAN.
When noises occur due to the static electricity, etc.,
the TV might stop operating for the protection of the
devices. In this case, turn the TV off with Mains power
On / Off switch, then turn it on again.
Additional information for the wireless LAN and access
point may be on the following website. (English only)
http://panasonic.net/viera/support
Bluetooth
®
wireless technology
Caution
The TV, 3D Eyewear and Electronic Touch Pen use
the 2.4 GHz radio frequency ISM band (Bluetooth
®
).
To avoid malfunctions or slow response caused by
radio wave interference, keep the TV, 3D Eyewear and
Electronic Touch Pen away from the devices such as
other wireless LAN devices, other Bluetooth devices,
microwaves, mobile phones and the devices that use
2.4 GHz signal.
English
5
Ventilation
Caution
Allow sufficient space around the TV in order to help
prevent excessive heat, which could lead to early failure
of some electronic components.
Minimum distance:
(cm)
10
10
10
7
Ventilation should not be
impeded by covering the
ventilation openings with items
such as newspapers, tablecloths
and curtains.
Whether you are using a pedestal or not, always ensure
the vents at the bottom of the TV are not blocked and
there is sufficient space to enable adequate ventilation.
Moving the TV
Caution
Before moving the TV, disconnect all cables.
The TV is heavy. Move the
TV with at least two people.
Support as shown to avoid
injury by the TV tipping or
falling.
Transport only in upright position. Transporting the TV
with its display panel facing upwards or downwards
may cause damage to the internal circuitry.
When not in use for a long time
Caution
This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected to a
live socket outlet.
Remove the mains plug from the wall socket when the
TV is not in use for a prolonged period of time.
Excessive volume
Caution
Do not expose your ears to
excessive volume from the
headphones. Irreversible
damage can be caused.
If you hear a drumming noise in your ears, turn down
the volume or temporarily stop using the headphones.
Battery for the Remote Control /
3D Eyewear / Electronic Touch Pen
Caution
Incorrect installation may cause battery leakage,
corrosion and explosion.
Replace only with the same or equivalent type.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and
manganese batteries).
Do not use rechargeable batteries (Ni-Cd, etc.).
Do not burn or break up batteries.
Do not expose batteries to excessive heat such as
sunshine, fire or the like.
Make sure you dispose of batteries correctly.
Remove the battery from the unit when not using for
a prolonged period of time to prevent battery leakage,
corrosion and explosion.
Electronic Touch Pen Use
Warning
The TV may be hot. Do not touch it continuously to
prevent low temperature burn.
Caution
Do not forcibly hit or pick the TV screen with the
Electronic Touch Pen to prevent the TV from falling
over.
Touch the TV screen only with the tip of the Electronic
Touch Pen, do not move the tip with exerting pressure
on, or do not move the tip fast to prevent the scratch of
the screen.
Stop using the Electronic Touch Pen immediately if you
experience any redness, pain or skin irritation. In rare
cases, the materials used in the Electronic Touch Pen
may cause an allergic reaction.
Use the Electronic Touch Pen taking a break
sometimes. Guideline for continuous use is around
1 hour to protect against eyestrain or physical
deconditioning.
Do not use the Electronic Touch Pen at high
temperatures. Always keep the Electronic Touch Pen in
a cool and dry place.
3D Eyewear Use
Caution
Use the 3D Eyewear only for the intended purpose and
nothing else.
Do not move around while wearing the 3D Eyewear to
avoid falling or accidental injury.
Do not drop, bend, exert pressure on, or step on the 3D
Eyewear.
Be careful of the tips of the frame when putting on the
3D Eyewear.
Be careful not to trap your fingers in the hinge section
of the 3D Eyewear.
Do not use the 3D Eyewear if it is physically damaged.
If you suffer from any eyesight problems (short / far-
sighted, astigmatism, eyesight differences in left and
right), ensure that you correct your vision before using
the 3D Eyewear. The supplied 3D Eyewear can be worn
over vision correction glasses.
English
6
Stop using the 3D Eyewear immediately if you
experience any redness, pain or skin irritation around
the nose or temples. In rare cases, the materials used
in the 3D Eyewear may cause an allergic reaction.
Do not use the 3D Eyewear at high temperatures.
Always keep the 3D Eyewear in a cool and dry place.
Stop using the 3D Eyewear immediately if a malfunction
or fault occurs.
Viewing 3D Images
Caution
Pay special attention when children are viewing 3D
images. 3D images should not be viewed by children
younger than about 6 years old, as a guideline.
All children must be fully supervised by parents or
guardians who must ensure their safety and health
while they are viewing 3D images.
Stop viewing 3D images immediately if you feel tired,
feel unwell, experience any other uncomfortable
sensation or clearly see double images. Take an
appropriate break before continuing to view. When you
set the 3D effect by using [3D Adjustment], take into
account that the vision of 3D images varies among
different individuals.
Do not view 3D images if you have a history of
oversensitivity to light, heart problems or any other
medical conditions.
When viewing 3D images, your sense of distance may
be tricked or go wrong. Be careful not to hit the TV
screen or other people unintentionally. Ensure there
are no breakable objects around you to avoid any
accidental damage or injury.
Do not view 3D images from a distance shorter than
recommended. The recommended viewing distance is
at least 3 times of the image height.
42-inch model
: 1.6 m or more
50-inch model
: 1.9 m or more
55-inch model
: 2.1 m or more
65-inch model
: 2.4 m or more
When black bands at the top and bottom of the screen
are displayed, such as movies, view the screen from
a distance at least 3 times the height of the actual
image. (That makes the distance shorter than the
recommended values above.)
English
7
Accessories
Remote Control
(p. 14)
N2QAYB000829
Batteries (2)
R6
(p. 14)
Pedestal
(see below)
42-inch model
55-inch model
50-inch model
65-inch model
Mains lead
(p. 9)
3D Eyewear
(p. 20)
Electronic Touch Pen
(with R03 battery)
(p. 15)
Cable tie
(p. 13)
AV1 (SCART) adaptor
(p. 10)
Ferrite core for
LAN cable (2)
(Large size)
(p. 11)
Ferrite core for
headphones
(Small size)
(p. 12)
Use the Ferrite cores to comply with the EMC standard.
Operating Instructions
Pan European Guarantee Card
Accessories may not be placed all together. Take care not to throw them away unintentionally.
For the information of optional accessories, refer to [eHELP] (Support > Optional accessories).
Assembling / Removing the pedestal
Assembly screw
(black)
(7)
(12)
42-inch model
50-inch model
55-inch model
65-inch model
M5 × 16
Bracket
42-inch model
50-inch model
55-inch model
65-inch model
Base
Assembly screw
(black)
(5)
42-inch model
50-inch model
M4 × 10
Neck
42-inch model
50-inch model
55-inch model
65-inch model
Cover
42-inch model
50-inch model
English
8
Assembling the pedestal
5
A
A
B
F
1
2
3
4
6
B
A
C
D
E
42-inch model
50-inch model
42-inch model
50-inch model
55-inch model
65-inch model
42-inch model
50-inch model
55-inch model
65-inch model
Adjusting the panel to your desired angle
42-inch model
50-inch model
Do not place any objects within the full rotation range.
15°
15°
(View from the top)
42-inch model
50-inch model
Secure the base as shown below to prevent the TV
from falling over.
The place where the base is secured should be thick
enough and made of hard material.
Commercially available screw
(not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
(
42-inch model
50-inch model
) / (
55-inch model
65-inch model
) from the
TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screw from the cover.
42-inch model
50-inch model
4 Pull out the cover.
42-inch model
50-inch model
5 Remove the assembly screws from the bracket.
6 Remove the assembly screws from the back of the base and pull out the neck.
English
9
Connections
External equipment and cables shown are not supplied with this TV.
Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Check the type of terminals and cable plugs are correct when connecting.
Always use a fully wired SCART or HDMI cable.
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
Also read the manual of the equipment being connected.
Terminals
8 7 9
4
6
5
2
1
3
10
1
CI slot (p. 12)
2
SD Card slot
3
Headphone jack (p. 12)
4
USB 1 - 2 port
5
HDMI1 - 3 (p. 10, 12)
6
DIGITAL AUDIO
7
ETHERNET (p. 11)
8
Terrestrial / cable terminal
(see below)
9
AV1 (SCART) (p. 10)
10
AV2 (COMPONENT / VIDEO)
(p. 11, 12)
Basic connections
Mains lead and aerial
Mains lead
Push until both side
tabs click
Make sure that
the mains lead is
securely fixed.
To remove from the TV:
tabs
Press both tabs and pull
on mains connector to
release
Cable
DVB-C, DVB-T, Analogue
AC 220-240 V
50 / 60 Hz
Mains lead
(supplied)
Terrestrial aerial
RF cable
English
10
AV devices
DVD Recorder / VCR
TV
DVD Recorder / VCR
Cable
SCART cable
RF cable
Terrestrial aerial
RF cable
AV1 (SCART)
adaptor (supplied)
DVD Recorder / VCR and Set top box
TV
Set top box
HDMI cable
SCART cable
SCART cable
DVD Recorder / VCR
Terrestrial aerial
RF cable
RF Cable
Cable
AV1 (SCART)
adaptor (supplied)
English
11
Network
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network
environment. If you do not have any broadband network services, please consult your retailer for assistance.
Prepare the internet environment for wired connection or wireless connection.
Setup of the network connection will start when first using the TV. (p. 17)
Wired connection
TV
Internet environment
*
Less than 10 cm
LAN cable (Unshielded)
Use the Unshielded Twist Pair (UTP) LAN cable.
Ferrite core - Large size (supplied)
Installing the Ferrite core
Pull back the tabs
(in two places)
Wind the cable twice Close
Wireless connection
Internet environment
Access point
Built-in wireless LAN
Other connections
DVD player
(COMPONENT equipment)
TV
DVD Player
(Listening)
(Viewing)
English
12
Camcorder / Game equipment
(VIDEO equipment)
TV
Game equipment
(Viewing)
(Listening)
Camcorder
Amplifier (to listen with speakers)
TV
HDMI cable
Amplifier with
speaker system
External equipment
(DVD Player, etc.)
Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio
Return Channel) function.
As for an amplifier without ARC function, use DIGITAL AUDIO.
To enjoy the sound from the external equipment in multi-channel sound (e.g. Dolby Digital 5.1ch), connect the
equipment to the amplifier. For the connections, read the manuals of the equipment and amplifier.
Headphones
TV
(M3 stereo mini plug)
To adjust volume
[Headphone Volume] in the
Sound Menu
Less than
10 cm
Ferrite core - Small size (supplied)
Installing the Ferrite core
Pull back the tab Wind the cable twice Close
Common Interface
TV
CI module
If a view card and a card reader come as a set, first insert the card
reader, then insert the view card into the card reader.
Insert the module in the correct direction.
English
13
Types of connectable equipment to each terminal
Features
Terminal
AV1
*
1
AV2
DIGITAL
AUDIO
ETHERNET
HDMI 1 - 3
USB 1 - 2
COMPONENT VIDEO
To record / play back videocassettes / DVDs
(VCR / DVD Recorder)
To watch 3D contents (Blu-ray Disc Player)
To watch satellite broadcasts (Set top box)
To watch DVDs (DVD Player)
To watch camcorder images (Video camera)
To play games (Game equipment)
To use amplifier with speaker system
*
2
To use network services
*
3
VIERA Link
: Recommended Connection
*
1: To connect the equipment, the SCART adaptor (supplied) is necessary.
*
2: Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio
Return Channel) function.
*
3: Use USB 1 port for connecting the Communication Camera.
Using the cable tie (supplied)
Attach the cable tie Bundle the cables
hole
Insert the cable
tie in a hole
hooks
Set the tip in
the hooks
To remove from the TV: To loosen:
Keep pushing
both side snaps
snaps
knob
Keep pushing
the knob
Do not bundle the RF cable and mains lead
together (could cause distorted image).
Fix cables with the cable tie as necessary.
When using the optional accessory, follow the
option’s assembly manual to fix cables.
English
1
14
15
18
20
21
22
23
16
24
2
4
5
6
19
10
3
17
7
8
9
11
12
13
14
Identifying Controls
Remote Control
1
Standby On / Off switch
2
3D button
Switches the view between 2D and 3D.
3
[Main Menu]
Press to access Picture, Sound, Network, Timer,
Setup and Help Menus.
4
Teletext button
5
Information
Displays channel and programme information.
6
APPS
Displays [APPS list] (applications list).
7
OK
Confirms selections and choices.
Press after selecting channel positions to quickly
change channel.
Displays the Channel List.
8
[Option Menu]
Easy optional setting for viewing, sound, etc.
9
Coloured buttons
(red-green-yellow-blue)
Used for the selection, navigation and operation of
various functions.
10
Volume Up / Down
11
Numeric buttons
Changes channel and teletext pages.
Sets characters.
When in Standby mode, switches TV on.
12
[eHELP]
Displays [eHELP] (Built-in Operating Instructions).
13
Input mode selection
TV - switches to DVB-C / DVB-T / Analogue mode.
AV - switches to AV input mode from Input
Selection list.
14
Aspect
Changes aspect ratio.
15
Subtitles
Displays subtitles.
16
Exit
Returns to [Home Screen].
17
HOME
Displays [Home Screen].
18
TV Guide
Displays Electronic Programme Guide.
19
Cursor buttons
Makes selections and adjustments.
20
Return
Returns to the previous menu / page.
21
Channel Up / Down
22
Sound Mute On / Off
23
Last view
Switches to previously viewed channel or input
mode.
24
Operations for contents, connected equipment,
etc.
Installing / Removing batteries
Pull open
Hook
Note the correct polarity
(+ or -)
Close
English
15
Electronic Touch Pen
You can paint or play games on the TV screen with the Electronic Touch Pen.
The Electronic Touch Pen can be used by pairing to the TV in [Auto Setup] (p. 17) or [Touch Pen Setup].
For more information, refer to [eHELP] (Functions > Electronic Touch Pen > Touch Pen Setup).
1
2
3
4
2
Indicator lamp
Lights for approx. 2 seconds when turned on, and
then blinks at approx. 2-second intervals.
Up to 2 pieces of the Electronic Touch Pen (Pen1 /
Pen2) can be used simultaneously.
Indicator blinks:
Pen1: Red
Pen2: Green
Also lights or blinks when pairing the Electronic
Touch Pen to the TV.
Blinks 5 times consecutively at power-on when the
battery level is low.
3
Unit cover
4
Pen tip
Press the pen tip on this side of the Electronic Touch
Pen against the TV screen for use.
1
Power button
To turn on: Press once
To turn off: Press and hold 2 seconds or longer
Automatically turned off if unused for 5 minutes.
Inserting the battery
1
Turn and slide the unit cover until the entire
shape of the battery is visible.
2
Insert the R03 battery, and then slide and turn the
unit cover to close until it clicks.
How to hold the Electronic Touch Pen
Touch the tip of the Electronic Touch Pen vertically onto
the TV screen and press it lightly.
Note
Do not use devices such as mobile phones or personal transceivers that emit strong electromagnetic waves near the
Electronic Touch Pen as this may cause the Electronic Touch Pen to malfunction.
Use the Electronic Touch Pen where there is no interference from other Bluetooth devices.
For more information, refer to [eHELP] (Functions > Electronic Touch Pen).
English
16
Indicator / Control panel
When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to
highlight the pressed button.
Using the On Screen Displays - Operation guide
Many features available on this TV can be accessed via the On Screen Display menu.
Operation guide
Operation guide will help your operation by using the
remote control.
Example: [Sound Menu]
1/2
0
0
0
11
0
Mode
Standard
Bass
Treble
Equaliser
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Off
Off
Main Menu
Picture
Sound
Network
Timer
Setup
Select
Selects your favourite sound
mode.
Page up
Change
RETURN
Page down
Operation guide
S
elec
t
S
elects
y
our
f
avourite sound
mode
.
Pa
g
eu
p
C
han
ge
R
ET
U
R
Page
dow
n
Balance
Help
Bass Boost Off
How to use remote control
Open the main menu
Move the cursor / select from a range of options /
select the menu item (up and down only) / adjust
levels (left and right only)
Access the menu / store settings after adjustments
have been made or options have been set
Return to the previous menu
Exit the menu system and return to [Home Screen]
1
Input mode selection
Press repeatedly until you reach the desired
mode.
[Main Menu]
Press and hold for about 3 seconds to display
main menu.
OK (when in the menu system)
2
Channel Up / Down
Cursor Up / Down (when in the menu system)
3
Volume Up / Down
Cursor Left / Right (when in the menu system)
4
Mains power On / Off switch
Use to switch the mains power.
5
Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
6
Ambient sensor
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture Menu is set to
[On].
7
Power LED
Red: Standby
Green: On
The LED blinks when the TV receives a command
from the remote control.
Rear side of the TV
3
1
4
2
5 6 7
English
17
First time Auto Setup
Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time.
These steps are not necessary if the setup has been completed by your local dealer.
Please complete connections (p. 9 - 13) and settings (if necessary) of the connected equipment before starting Auto
Setup. For details of settings for the connected equipment, read the manual of the equipment.
1
Plug the TV into mains socket and turn power on
Takes a few seconds to be displayed.
2
Select the following items
Set up each item by following the on-screen instructions.
Select the language
Select [Home]
Select [Home] viewing environment to use in your home environment.
[Shop] is for shop display.
To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.
Set up the network connection
Select your country
Depending on the country you select, select your Region or store the Child Lock-PIN number (“0000” cannot
be stored).
Tick the TV signal mode to tune, and then select [Start Auto Setup]
: tune (search for the available channels)
: skip tuning
Auto Setup screen varies depending on the country and the signal mode you select.
[DVB-C Network Settings]
Normally set [Frequency] and [Network ID] to [Auto].
If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider
with numeric buttons.
Pair the Electronic Touch Pen
3
Select the type of [Home Screen]
The demonstration to explain how to use [my Home Screen] is displayed. Confirm the demonstration by
following the on-screen instructions, and then select the desired [Home Screen].
Example: [Home Screen Selection] Example: [TV Home Screen]
[my Home Screen] is the start-up screen when the TV is turned on or the HOME button is pressed.
Auto Setup is now complete and your TV is ready for viewing.
If tuning has failed, check the connection of the network, RF cable, and then follow the on-screen instructions.
Note
The TV will automatically go into Standby mode when no operation is performed for 4 hours if [Auto Standby] in the
Timer Menu is set to [On].
The TV will automatically go into Standby mode when no signal is received and no operation is performed for
10 minutes if [No signal Power off] in the Timer Menu is set to [On].
To retune all channels [Auto Setup] in [Tuning Menu] (Setup Menu)
To add the available TV signal mode later [Add TV Signal] in [Tuning Menu] (Setup Menu)
To initialise all settings [Shipping Condition] in [System Menu] (Setup Menu)
English
18
Operations
Turn power on
(TV)
or
Mains power On / Off switch should be on. (p. 16)
(Remote Control)
The last viewed [Home Screen] is displayed.
Example: [TV Home Screen] Example: Selected content screen
To return to [Home Screen] at any time
You can set up or make [Home Screen] to display desired information, to access specific features easily, to select the
default [Home Screen], etc. For details, follow the on-screen instructions or refer to [eHELP] (Watching > my Home
Screen).
Watching TV
1
Select the TV viewer from [Home Screen]
select
access
2
Select the mode
Selectable modes vary depending on the tuned channels.
TV Selection
DVB-C
DVB-T
Analogue
select
access
You can also select the mode by pressing the TV button repeatedly.
If [TV Selection] menu is not displayed, press the TV button to switch the mode.
3
Select a channel
up
down
or
To select 2 or more-digit channel position number, e.g. 399
To access each feature
Access [APPS list] and select a feature
Example: [APPS list]
APPS is the applications (features) of the TV.
For operations of each feature and the setup of [APPS list], follow the
on-screen instructions or refer to [eHELP] (Functions > APPS list).
English
19
How to Use eHELP
[eHELP] is the detailed operating instructions built into the TV, and helps you to get more understanding of the
operations for each feature.
1
Display [eHELP]
or
[Help]
[eHELP]
[Read first] will be displayed on the top page. Please read these instructions fully to get more understanding of
the operation in [eHELP].
If this is not the first time to view [eHELP] from when the TV is turned on, the confirmation screen is displayed
to select whether [First Page] or [Last Page].
2
Select the category and item
Category field
Item field
Sub item field
Description
select category
access
select item
access
select sub item
access
To return to the previous field
To scroll the description (if more than 1 page)
While the description is highlighted
To display the menu related to the description (only for some descriptions)
(red)
English
20
Viewing 3D images
You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D
Eyewear.
“Accessories” (p. 7)
The 3D Eyewear must be worn to view 3D images.
This TV supports [Frame Sequential]
*
, [Side by Side] and [Top and Bottom] 3D formats.
*
: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately
played back.
3D Eyewear
Use the supplied 3D Eyewear or Panasonic 3D Eyewear that has this logo and supports Bluetooth
®
wireless
technology.
“Full HD 3D Glasses™” logo indicates products that are compatible with the active shutter 3D
glasses technology standards licensed by the Full HD 3D Glasses Initiative. The RF mark on
the logo means the wireless system (Bluetooth
®
wireless technology), and you can use the 3D
Eyewear and the TV that have the same mark together.
Note
Do not exert pressure on or scratch the lens of the 3D Eyewear.
Do not use devices such as mobile phones or personal transceivers that emit strong electromagnetic waves near the
3D Eyewear as this may cause the 3D Eyewear to malfunction.
Do not wear the 3D Eyewear when watching anything other than 3D images. Liquid crystal displays (such as
computer screens, digital clocks or calculators, etc.) may be difficult to see while wearing the 3D Eyewear.
First registration
Perform the first registration when first using the 3D Eyewear with this TV.
1 Turn the TV on
2 Press the button for about 1 second to turn the 3D Eyewear on
The lamp lights for about 2 seconds and then flashes.
The 3D Eyewear will be turned on and start registration.
Place the 3D Eyewear within 50 cm from the TV while registration in progress.
3 After the registration is successfully completed, the 3D Eyewear will reconnect with TV automatically when
the 3D Eyewear is turned on near the TV in 3D mode
Registration again
When connection with the registered TV fails, or when using with another TV, re-register the 3D Eyewear.
1 Turn the TV on
2 Within 50 cm from the TV, press Power button until lamp lights, then release it to start registration
3 After the registration is successfully completed, the 3D Eyewear will reconnect with TV automatically when the 3D
Eyewear is turned on near the TV in 3D mode
To view the 3D images
Playing back 3D-compatible Blu-ray disc (Frame Sequential format)
Connect the 3D-compatible player via a fully wired HDMI compliant cable. (If you use the non 3D-compatible player,
the images will be displayed in 2D mode.)
If the input mode is not switched automatically, select the input mode connected to the player using the AV button.
3D-supported broadcast
Please consult the suppliers of contents or programmes for availability of this service.
3D photos and 3D videos taken by 3D-compatible Panasonic products
Available in Media Player and Network services.
2D images converted to 3D
Press the 3D button and set to [2D 3D] mode in [3D Mode Selection].
Preparations
Ensure that the registration of the 3D Eyewear has been completed.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80

Panasonic TX-P50ST60 Manualul proprietarului

Tip
Manualul proprietarului