Mellanox Technologies Switch-IB Manual de utilizare

Mellanox Technologieswww.mellanox.com

324-Port EDR InfiniBand Switch-IB™

Series Switch Platform Hardware

User Manual

PN: CS7510

Rev 1.9

Doc #:MLNX-15-4748-324 2Mellanox Technologies

3Mellanox Technologies

Table of Contents

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Chapter 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1.1 Product Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1.1.1 Serial Number and Product Version Information . . . . . . . . . . . . . . . . . . . . 14

1.1.2 Management Module MAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

1.1.3 Product Physical Specifications and Power. . . . . . . . . . . . . . . . . . . . . . . . .

15

1.2 Features List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.3 InfiniBand EDR Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

1.4 Power Supply Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

1.4.1 AC Source Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.4.2 Power Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

1.5 Fan Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Chapter 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.1 Installation Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.2 Environmental and Safety Recommendations. . . . . . . . . . . . . . . . . . . . . .

23

2.3 Switch Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

2.4 Unpacking the Switch System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

2.4.1 Verifying Crate Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

2.4.2 Opening the Chassis Crate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

2.5 Physical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

2.5.1 Installation Kit Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

2.5.2 Required Installation Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32

2.5.3 Installation Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33

2.6 Ground Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

2.7 FRU Insertion and Extraction (Hot-Swappable) . . . . . . . . . . . . . . . . . . . . .

60

2.7.1 Power Supply Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

2.7.2 Leaf Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

62

2.7.3 Spine Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

64

2.7.4 Fan Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

68

2.7.5 Management Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

71

2.8 InfiniBand QSFP Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

2.9 Cable Holder Placement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

75

2.9.1 Supported Approved Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

2.9.2 Cable Power Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

76

2.10 Power Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

4Mellanox Technologies

Chapter 3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

3.1 LED Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

3.1.1 Power Supply Unit LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

3.1.2 System AC Power Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

78

3.1.3 Leaf Module LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

78

3.1.4 Spine Module LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

80

3.1.5 Spine Side Panel Display LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . .

82

3.1.6 Management Module LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

83

3.1.7 Port Connector Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

84

3.2 Air Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

3.3 QSFP Cable Power Budget Classification . . . . . . . . . . . . . . . . . . . . . . . . . .

85

3.4 Management Module Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

85

3.4.1 I2C/Console (RS232) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

3.4.2 Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

86

3.4.3 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

86

3.4.4 Reset – RST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

86

Chapter 4 Chassis Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

4.1 System Status After Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

4.2 Switch Shut-Down Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

89

Chapter 5 Switch Management Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

5.1 InfiniBand Subnet Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

5.2 Fabric Inspector (Diagnostics) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

91

5.3 Accessing the CPU via the Ethernet Connector . . . . . . . . . . . . . . . . . . . . .

91

5.4 Upgrading Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

91

Chapter 6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

6.1 Power Supply Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

6.2 Leaf Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

92

6.3 Management Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

93

6.4 Spine Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

94

6.5 MLNX-OS® Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

94

Appendix A Specification Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

A.1 EMI Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

A.2 Approved Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

A.3 EMC Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Appendix B Thermal Threshold Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Appendix C Calculating the Weight of a Customized Chassis . . . . . . . . . . . 100

Appendix D Calculating the Power of a Chassis . . . . . . . . . . . . . . . . . . . . . . 101

Appendix E QSFP Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

5Mellanox Technologies

Appendix F MNG Console Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Appendix G Replacement Parts Ordering Numbers . . . . . . . . . . . . . . . . . . . 107

Appendix H Safety Warnings (Multiple Languages) . . . . . . . . . . . . . . . . . . . 108

H.1 Nordic Countries Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

H.2 Installation Safety Warnings (English) . . . . . . . . . . . . . . . . . . . . . . . . . 108

H.3 (    ( . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

H.4 ⸘孬⸘⏷㊶巵⛙ (Chinese) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

H.5 Avertissements de sécurité pour l'installation (French). . . . . . . . . . . 118

H.6 Installation Sicherheitshinweise(German). . . . . . . . . . . . . . . . . . . . . . 121

H.7 Advertencias de seguridad de instalación (Spanish) . . . . . . . . . . . . . 124

H.8 Предупреждения по технике безопасности при установке (Russian) 127

H.9 Avertismente privind siguranţa la instalare (Romanian) . . . . . . . . . . 130

H.10 Sigurnosna upozorenja za instaliranje (Croatian) . . . . . . . . . . . . . . . . 134

H.11 Avvertenze di sicurezza per l’installazione (italiano) . . . . . . . . . . . . . 137

H.12 Montaj Güvenlik Uyarıları (Türkçe) . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

H.13 Japan VCCI Class A Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

H.14 ۶৔߇ࢷˁˈଞ˲߭

6Mellanox Technologies

List of Tables

Table 1: User Manual Revision History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Table 2: Reference Documents and Websites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Table 3: Mellanox Part Number Legend. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Table 4: Power Supply OPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Table 5: Chassis Installation Kit Items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Table 6: Cable Management Installation Kit Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Table 7: Leaf Status LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Table 8: Bad Port LED Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Table 9: Connector Physical and Logical Link Indications . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Table 10: Spine Status LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Table 11: Spine Fan Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Table 12: Spine to Leaf IB Link Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Table 13: Bad Port LED Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Table 14: Spine-Side Panel LED Display for Normal Operation . . . . . . . . . . . . . . . . . . . . . . .82

Table 15: Management LED Display for Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . .84

Table 16: Switch Specification CS7510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Table 17: Switch System Weight Calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Table 18: Power Consumption of Chassis Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

Table 19: QSFP Cable Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

Table 20: Calculating Total Switch System Power Consumption . . . . . . . . . . . . . . . . . . . . .101

Table 21: InfiniBand QSFP Connector Pin-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Table 22: RJ-45 CONSOLE and I²C Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Table 23: Replacement Parts Ordering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

7Mellanox Technologies

List of Figures

Figure 1: Product Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Figure 2: Product Label Tab Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Figure 3: Management Module MAC Address Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Figure 4: CS7510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Figure 5: Shock Stickers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

Figure 6: Crate Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

Figure 7: Distance Between the Vertical Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

Figure 8: Chassis Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

Figure 9: Cable Management Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

Figure 10: Shelf Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32

Figure 11: Tools for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32

Figure 12: Cage Nut Placement for Shelf on BEAM-1 and BEAM-2 . . . . . . . . . . . . . . . . . . . . . . . . . . .

33

Figure 13: Cage Nut Placement for Shelf on BEAM-3 and BEAM-4 . . . . . . . . . . . . . . . . . . . . . . . . . . .

34

Figure 14: Cage Nut Placement for Support Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

35

Figure 15: Cage Nut Placement for Switch System Chassis on Spine Side . . . . . . . . . . . . . . . . . . . . .

36

Figure 16: Cage Nut Placement for Cable Holders on Leaf Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

37

Figure 17: Loosening the Leaf-Side Shelf Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38

Figure 18: Adjusting the Leaf-Side Shelf Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39

Figure 19: Placing Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40

Figure 20: Tightening Shelf Cage Nut Screws on Spine Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41

Figure 21: Tightening Shelf Cage Nut Screws on Leaf Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41

Figure 22: Tightening Spine-side Shelf Arm Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42

Figure 23: Screwing Leaf-side Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42

Figure 24: Tightening Spine-side Shelf Arm Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43

Figure 25: Tightening Leaf-side Shelf Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

Figure 26: Weld Bracket Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

5

Figure 27: Placement of Chassis in Rack – Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

Figure 28: Fork Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

Figure 29: Mechanical Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

47

Figure 30: Rack and Chassis Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

47

Figure 31: Rotated Strip and Bracket Weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

Figure 32: Sliding Chassis in Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49

Figure 33: Sliding in Chassis Slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50

Figure 34: Sliding Chassis into Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

51

8Mellanox Technologies

Figure 35: Screwing the Chassis to the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Figure 36: Screwing the 4-Oval Washer Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53

Figure 37: Removing the Weld Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54

Figure 38: Leaf Side Fixing Bracket With Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55

Figure 39: Spine Side Fixing Bracket With Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

56

Figure 40: Leaf Side Fixing Bracket With Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

57

Figure 41: Spine Side Fixing Bracket With Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

58

Figure 42: Installing Cable Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59

Figure 43: Grounding Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

60

Figure 44: Power Unit AC Inlet Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

61

Figure 45: Power Supply Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

61

Figure 46: Releasing Leaf Ejector Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

62

Figure 47: Intact Leaf Signal Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

63

Figure 48: Intact Leaf Power Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

63

Figure 49: Leaf Module Insertion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

64

Figure 50: Management Module Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

65

Figure 51: Releasing Spine Ejector Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

66

Figure 52: Intact Spine Signal Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

67

Figure 53: Intact Spine Power Pin Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

67

Figure 54: Spine Module Insertion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

68

Figure 55: Leaf Fan Locations on the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

69

Figure 56: Leaf Fan Module Extraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

69

Figure 57: Spine Fan Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

70

Figure 58: Fan Status LED on the Spine Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

70

Figure 59: Releasing Management Ejector Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

72

Figure 60: Intact Signal Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

72

Figure 61: Intact Management Power Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

73

Figure 62: Management Module Insertion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

73

Figure 63: Cable Supporter Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

75

Figure 64: AC Inlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

76

Figure 65: Power Supply Unit Status Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

77

Figure 66: CS7510 PSU Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

78

Figure 67: Leaf Module LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

78

Figure 68: Spine Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

80

Figure 69: Spine Side Panel Display Status Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

82

Figure 70: Management Module Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

83

9Mellanox Technologies

Figure 71: Port Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Figure 72: Top and Bottom Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

85

Figure 73: Management Module Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

85

Figure 74: Spine Side Panel Display Status Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

89

Figure 75: Management Module Status Indications for Normal Operation (Master)

. . . . . . . . . . . .89

Figure 76: Management Module Status Indications for Normal Operation (Slave)

. . . . . . . . . . . . .89

Figure 77: InfiniBand QSFP Connector Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

104

Figure 78: QSFP Connector Male and Female Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

105

Figure 79: RJ45 to DB9 Harness Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

106

10Mellanox Technologies

Revision History

Table 1 - User Manual Revision History

Rev Date Description

1.9 14 August, 2017 Updated:

Note to Chapter 2.7.2, “Leaf Modules”

Note to Chapter 2.7.3, “Spine Modules”

1.8 5 March, 2017 Added:

Appendix F, “MNG Console Interfaces,” on page 106

Note to Appendix 3.4.1, “I2C/Console (RS232),” on page 85

1.7 8 February, 2017 Updated:

Korean warning notes

1.6 1 December, 2016 Updated:

• “Extracting Spine Module #1 or #2” on page 63

1.5 17 August, 2016 Updated:

• Section 3.1.1, “Power Supply Unit LEDs,” on page 77

• Replacement kit part number “MTDF-KIT-B”

1.4 29 June, 2016 Added Section 1.5, “Fan Redundancy,” on page 18

1.3 18 May, 2016 Added:

• Section 2.5.2, “Required Installation Tools,” on page 31

Updated:

• Table 5, “Chassis Installation Kit Items,” on page 28

• Section 2.5.3, “Installation Procedure,” on page 32

• Section 3.4.4, “Reset – RST,” on page 86

1.2 1 May, 2016 Updated:

• Document title

• Section “About this Manual,” on page 11

• Chapter 1, “Overview,” on page 14

• Appendix G, “Replacement Parts Ordering Numbers,” on page 107 with

Switch-IB 2 replacement leaf and spine

1.1 20 March, 2016 Updated:

• Note in Section 4.1, “System Status After Power Up,” on page 88

• Section 6.1, “Power Supply Unit,” on page 92 step 7

• “Regulatory Compliance” in Table 16, “Switch Specification CS7510,”

on page 96

1.0 19 December

2015

First release

11Mellanox Technologies

About this Manual

This manual provides an overview of the Switch-IB™/Switch-IB™ 2 series based InfiniBand

CS7510 director switch and guidelines for its operation.

Intended Audience

This manual is intended for users and system administrators responsible for installing and setting

up the chassis platform.

The manual assumes familiarity with the InfiniBand

®

architecture specification.

Related Documentation

The documentation set accompanying the QSFP28 Chassis InfiniBand Switch platform includes

the following:

Table 2 - Reference Documents and Websites

Document Name Description

InfiniBand Architecture Specifica-

tion, Vol. 1, Release 1.2.1

The InfiniBand Architecture Specification that is pro-

vided by IBTA

Switch Product Release Notes For possible hardware issues see the switch support prod-

uct page. This requires a customer support login. Look up

the relevant Switch-IB™ based switch system/series

release note file.

MLNX-OS® User Manual for VPI This document contains information regarding configur-

ing and managing Mellanox Technologies SwitchX®

switch platforms listing all of the commands available

through MLNX-OS with explanations and examples.

Dismantling Procedures Dismantling user guides for Mellanox Technologies prod-

ucts organized by product category.

http://www.mellanox.com/page/dismantling_procedures

Conventions

Throughout this manual, the name CS7510 and the terms chassis and switch are used to describe

the port QSFP28 InfiniBand chassis, unless explicitly indicated otherwise.

The following icons are used throughout this document to indicate information

that is important

to the user.

This symbol indicates information that is helpful to the user.

12Mellanox Technologies

Mellanox Part Numbering Legend

Table 3 - Mellanox Part Number Legend

Place Field Decoder

A Company name M – Mellanox Technologies

BB Switch system type CS – Chassis

MB – Management Board

SB – Switch-IB™ in leaf or spine

module

C Data rate 7 – EDR InfiniBand

D System type 5 – director switch

EE Number of ports 00 – 648 ports

10 – 324 ports

20 – 216 ports

This symbol indicates a situation that can potentially cause damage to hardware or soft-

ware.

This symbol makes recommendations to the user.

Overview

14Mellanox Technologies

1 Overview

This chapter provides an overview of the CS7510 QSFP28 InfiniBand director switch platform

(referenced in this document as “the chassis” or “the switch”) and its operational environment.

The Mellanox CS7510 switch system provides the highest performing fabric solution by deliver-

ing high bandwidth and low latency to enterprise data centers (EDC), high-performance comput

-

ing (HPC) and embedded environments. Networks built with the CS7510 system

can carry

converged traffic with the combination of assured bandwidth and granular quality of service.

Built with Mellanox’s 6th and 7th generation of Switch-IB™ and Switch-IB™ 2 switch devices,

CS7510 systems provide up to 100Gb/s full bidirectional bandwidth per port. With up to 324

ports in a 16U rack space, this system is among the densest switching systems available.

The switch platform comes pre-installed with all necessary firmware

for

standard operation

within an InfiniBand fabric and requires an InfiniBand compliant Subnet Manager running from

one of the hosts or the management module of the switch system. The initial configuration proce-

dure should be followed to initialize the switch before connecting

it

to the network after which

normal operation can proceed. (See the installation guide for details regarding the initial configu-

ration.) Once connected to the network, the Subnet Management software automatically

discov-

ers and configures the fabric and begins utilizing the switch.

The Mellanox Operating System (MLNX-OS®) software package provides a

subnet manager

and network management tools as well as connectivity software for servers and storage, and is

available on the Mellanox website.

Basic installation is covered in Chapter 2, “Installation” on page 18.

Hot-swapping components and hardware maintenance is covered in Section 2.7, “FRU Insertion

and Extraction (Hot-Swappable),” on page 54.

1.1 Product Information

1.1.1 Serial Number and Product Version Information

The serial number, GUID identifier and product version information are found on the label

attached to the pull-out tab below the Mellanox logo on the spine side of the chassis.

Figure 1: Product Label

Overview

15Mellanox Technologies

The GUID is the System Image GUID according to the IB spec. It is burned on the board which

is in the chassis. All the boards and the management software look for this GUID in addition to

their own Node GUID.

Figure 2: Product Label Tab Location

The product

label tab is

located here on

the spine side

1.1.2 Management Module MAC

Each management module has a label with its MAC address. See Figure 3 for the location of this

label.

Figure 3: Management Module MAC Address Location

1.1.3 Product Physical Specifications and Power

The switch itself is 16U tall but requires an extra 1U to install the shelf.

The switch ships in a minimum base configuration plus additional modules

depending on the

chosen customer configuration. Optional modules included:

• Management modules

• Spine modules

•

Leaf modules

Overview

16Mellanox Technologies

The following figure presents a fully populated leaf and spine side.

Figure 4: CS7510

Leafs

Each leaf has 36 ports and up to 9

leafs can fit in the chassis

Chassis fan modules

Power supply units: 6

Spines

AC inlets

Fuse box

(Do not tamper with)

Power supplies

Management modules: 2

Spine modules: 9

Leaf modules: 9

Chassis fan modules: 12

AC inlets: 6

Management Modules

Overview

17Mellanox Technologies

1.2 Features List

• 324 EDR (100Gb/s) InfiniBand ports in a 16U switch

• 65 Tb/s aggregate data switching capacity with ultra low latency

• IBTA 1.3 and 1.2.1 compliant

• Up to EDR link speeds

• N+N power supply

• Chassis high availability

• sMB high availability

1.3 InfiniBand EDR Overview

The Mellanox CS7510 switch system supports EDR, standard InfiniBand data rate, where each

lane of a 4X port runs a bit rate of 25.78125Gb/s. The EDR physical layer is an IBTA specified

physical layer using different block types, deskew mechanism and framing rules.

Both FDR and EDR support Forward Error Correction (FEC), as described in

IEEE Std 802.3ap-

2007 (Amendment to IEEE Std 802.3-2005) chapter 74.

1.4 Power Supply Redundancy

The CS7510 platform comes standard with 6 power supplies. Each power supply is capable to

provide 48V

DC

2500W output power.

1.4.1 AC Source Requirements

CS7510 system supports 220V

AC

operation only. No support for 110V

AC

source. Each AC source

should be capable of providing at least 12A input current.

1.4.2 Power Redundancy

The minimum complement of PSUs which allows the chassis to run at full capacity is 3. The fol-

lowing two redundancy options are available:

• No redundancy (combined mode)

• N+N configuration (grid-redundant mode)

EDR is only guaranteed to work with approved Mellanox cables.

N+N redundancy only works with a supply voltage of 220V.

Overview

18Mellanox Technologies

The chassis PSUs are fed from two power grids for high availability. The second power grid

can be supplied by any of the following:

• a backup power supply grid

• a generator

• a battery backup system

• any combination of the above

Connecting 3 power supplies to one power supply grid and the remaining

3

power supplies to a

secondary power supply grid will create N+N redundancy. This is high availability. Under

these conditions should a power grid fail (an electric company power failure or blackout for

example) power grid High Availability will continue to keep the chassis running at full capacity

through the secondary or backup power supply grid.

When the power drops below the required minimum due to power supply failure, MLNX-OS®

may power down some leafs. If this happens it may be necessary to reboot the chassis once the

defective PSU has been replaced. Two ways to reboot are to use the reboot command in the CLI

or reboot through the WebUI.

Table 4 - Power Supply OPN

PSU OPN Wattage Description

MTDF-PS-A 2500W Supplies N+N redundancy for all switch chassis at 220 Volts

1.5 Fan Redundancy

Whether it is a chassis, or a spine fan unit, Mellanox’s EDR director switch chassis supports sin-

gle fan failure without performance degradation.

When a fan unit fails, it must remain in the chassis until a replacement is available. At that point,

the

failed fan unit must be promptly replaced so that the chassis remains with an empty slot for as

little time as possible.

The system cannot run with less than 3 PSUs, thus if one of the power grids is down

there is no power or PSU redundancy in the system.

Installation

19Mellanox Technologies

2 Installation

Installation and initialization of the chassis is a simple process requiring attention to the normal

mechanical, power, and thermal precautions for rack-mounted equipment. The chassis comes

only with the power supplies and fans pre-installed. The rest of the openings are populated with

blanks. All of the leafs, spines, and management modules are shipped in a separate package.

The chassis requires initial configuration to get the chassis and

fabric

management up and run-

ning through remote management.

2.1 Installation Safety Warnings

These safety warnings are in English. For other languages, please refer to the appendixes.

1. Installation Instructions

2. Bodily Injury Due to Weight

3. Heavy Equipment

This chassis can be installed in standard 19” racks that have depths between 715-

850mm between the vertical supports of the rack.

This unit is intended for installation in a restricted access location. A restricted access

area can be accessed only through the use of a special tool, lock and key, or other

means of security.

Read all installation instructions before connecting the equipment to the power source.

Use enough people to safely lift this product.

This equipment is very heavy and should be moved using a mechanical lift to avoid

injuries.

Installation

20Mellanox Technologies

4. Installation in Restricted Access Location

5. Risk of Electric Shock

6. Over-temperature

7. Stacking the Chassis

8. Redundant Power Supply Connection – Electrical Hazard

9. Double Pole/Neutral Fusing

10.Multiple Power Inlets

11. During Lightning – Electrical Hazard

This unit is intended for installation in a Restricted Access Location.

Risk of Electric Shock!

With the fan module removed power pins are accessible within the module cavity.

DO NOT insert tools or body parts into the fan module cavity.

This equipment should not be operated in an area with an ambient temperature exceed-

ing the maximum recommended: 40°C (104°F). Moreover, to guarantee proper air

flow, allow at least 8cm (3 inches) of clearance around the ventilation openings.

The chassis should not be stacked on any other equipment. If the chassis falls, it can

cause bodily injury and equipment damage.

This product includes a redundant power or a blank in its place. In case of a blank

power supply, do not operate the product with the blank cover removed or not securely

fastened.

This system has double pole/neutral fusing. Remove all power cords before opening

the cover of this product or touching any internal parts.

Risk of electric shock and energy hazard.

The PSUs are all independent.

Disconnect all power supplies to ensure a powered down state inside of the switch

platform.

During periods of lightning activity, do not work on the equipment or connect or dis-

connect cables.

Installation

21Mellanox Technologies

12.Copper InfiniBand Cable Connecting/Disconnecting

13.Rack Mounting and Servicing

14.Equipment Installation

15.Equipment Disposal

16.Local and National Electrical Codes

17. Installation Codes

18.Battery Replacement

Copper InfiniBand cables are heavy and not flexible, as such they should be carefully

attached to or detached from the connectors. Refer to the cable manufacturer for spe-

cial warnings/instructions.

When this product is mounted or serviced in a rack, special precautions must be taken

to ensure that the system remains stable. In general you should fill the rack with equip-

ment starting from the bottom to the top.

This equipment should be installed, replaced, and/or serviced only by trained and qual-

ified personnel.

Disposal of this equipment should be in accordance to all national laws and regula-

tions.

This equipment should be installed in compliance with local and national electrical

codes.

This device must be installed according to the latest version of the country national

electrical codes. For North America, equipment must be installed in accordance to the

applicable requirements in the US National Electrical Code and the Canadian Electri-

cal Code.

Warning: Replace only with UL Recognized battery, certified for maximum abnormal

charging current not less than 4mA

There is a risk of explosion should the battery be replaced with a battery of an incorrect

type.

Dispose of used batteries according to the instructions.

Pagina se încarcă ...

Mellanox Technologies Switch-IB Manual de utilizare

Acest manual este potrivit și pentru

Mellanox Technologies Switch-IB Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente