Panasonic SCHTB690EG Manualul proprietarului

Marca: Panasonic

Model: SCHTB690EG

Categorie: Seturi de difuzoare

Tip: Manualul proprietarului

Acest manual este potrivit și pentru

EB EG GN

SQT0852-2

Operating Instructions

Home Theater Audio System

Model No. SC-HTB690

Thank you for purchasing this product.

Please read these instructions carefully before using this product,

and save this manual for future use.

Model number suffix “EB” denotes UK model.

Included Installation Instructions

The installation work should be done by a qualified installation specialist. (> 13 to 18)

Before commencing work, carefully read these installation instructions and the operating instructions

to ensure that installation is performed correctly.

(Please keep these instructions. You may need them when maintaining or moving this system.)

SC-HTB690-SQT0852.book 1 ページ２０１５年４月２８日　火曜日　午前９時５４分

SQT0852

Safety precautions

Unit

≥ To reduce the risk of fire, electric shock or

product damage,

jDo not expose this unit to rain, moisture,

dripping or splashing.

jDo not place objects filled with liquids, such

as vases, on this unit.

jUse only the recommended accessories.

jDo not remove covers.

jDo not repair this unit by yourself. Refer

servicing to qualified service personnel.

≥ To prevent injury, this apparatus must be

securely attached to the wall in accordance

with the installation instructions.

AC mains lead

≥ To reduce the risk of fire, electric shock or

product damage,

Ensure that the power supply voltage

corresponds to the voltage printed on this unit.

Insert the mains plug fully into the socket outlet.

Do not pull, bend, or place heavy items on the

lead.

Do not handle the plug with wet hands.

Hold onto the mains plug body when

disconnecting the plug.

Do not use a damaged mains plug or socket

outlet.

≥ The mains plug is the disconnecting device.

Install this unit so that the mains plug can be

unplugged from the socket outlet immediately.

Button-type battery (Lithium battery)

≥ Risk of fire, explosion and burns. Do not

recharge, disassemble, heat above 60

C or

incinerate.

≥ Keep the Button-Type battery out of the reach

of children. Never put Button-Type battery in

mouth. If swallowed call your doctor.

Small object

≥ Keep the screws out of reach of children to

prevent swallowing.

≥ Keep the button-type battery out of reach of

children to prevent swallowing.

Never put Button-Type battery in mouth.

If swallowed call your doctor.

Unit

≥ Do not place sources of naked flames, such

as lighted candles, on this unit.

≥ This unit may receive radio interference

caused by mobile telephones during use. If

such interference occurs, please increase

separation between this unit and the mobile

telephone.

≥ This unit is intended for use in moderate

climates.

≥ Product Identification Marking is located on

the bottom of the unit.

Placement

≥ Place this unit on an even surface.

≥ To reduce the risk of fire, electric shock or

product damage,

jDo not install or place this unit in a

bookcase, built-in cabinet or in another

confined space. Ensure this unit is well

ventilated.

jDo not obstruct this unit’s ventilation

openings with newspapers, tablecloths,

curtains, and similar items.

jDo not expose this unit to direct sunlight,

high temperatures, high humidity, and

excessive vibration.

Button-type battery (Lithium battery)

≥ Danger of explosion if battery is incorrectly

replaced. Replace only with the type

recommended by the manufacturer.

≥ Insert with poles aligned.

≥ Mishandling of batteries can cause electrolyte

leakage and may cause a fire.

jRemove the battery if you do not intend to

use the remote control for a long period of

time. Store in a cool, dark place.

jDo not heat or expose to flame.

jDo not leave the battery(ies) in a car

exposed to direct sunlight for a long period

of time with doors and windows closed.

≥ When disposing of the batteries, please

contact your local authorities or dealer and

ask for the correct method of disposal.

WARNING CAUTION

SC-HTB690-SQT0852.book 2 ページ２０１５年４月２８日　火曜日　午前９時５４分

Precautions

SQT0852

Caution for AC Mains Lead

(For the AC mains plug of three

pins)

For your safety, please read the following text

carefully.

This appliance is supplied with a moulded three

pin mains plug for your safety and convenience.

A 10-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please

ensure that the replacement fuse has a rating of

10-ampere and that it is approved by ASTA or

BSI to BS1362.

Check for the ASTA mark Ï or the BSI mark Ì

on the body of the fuse.

If the plug contains a removable fuse cover you

must ensure that it is refitted when the fuse is

replaced.

If you lose the fuse cover the plug must not be

used until a replacement cover is obtained.

A replacement fuse cover can be purchased

from your local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the

type of AC mains plug (figures A and B).

Confirm the AC mains plug fitted and follow the

instructions below.

Illustrations may differ from actual AC mains

plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse

cover.

Figure A

Figure B

Fuse cover

Figure A Figure B

Fuse

(10 ampere)

Fuse

(10 ampere)

About descriptions in these operating instructions

≥ Pages to be referred to are indicated as “> ±±”.

≥ Labels on this unit and the remote control are indicated as [±±] in these operating instructions.

≥ The illustrations shown may differ from your unit.

≥ These operating instructions are applicable to model SC-HTB690 for variety of regions. Unless otherwise indicated,

illustrations in these operating instructions are of the model for the United Kingdom and Ireland.

≥ Operations in this operating instructions are described mainly with the remote control, but you can perform the operations

on the main unit if the controls are the same.

SC-HTB690-SQT0852.book 3 ページ２０１５年４月２８日　火曜日　午前９時５４分

SQT0852

Table of contents

Safety precautions ........................................................................................... 2

Caution for AC Mains Lead ............................................................................. 3

Before use

Supplied items.................................................................................................. 5

This system (SC-HTB690) .................................................................................................. 5

Accessories ......................................................................................................................... 5

Control reference guide................................................................................... 6

This system (Front) ............................................................................................................. 6

This system (Rear) .............................................................................................................. 7

Remote control .................................................................................................................... 8

Getting started

Step 1 Connections ......................................................................................... 9

Connection with the TV ....................................................................................................... 9

Connection from an HDMI compatible device ................................................................... 10

Using the IR Blaster ..........................................................................................................11

AC mains lead connection ................................................................................................ 12

Step 2 Placement .......................................................................................... 13

Safety Precautions ............................................................................................................13

The active subwoofer ........................................................................................................ 13

Wireless interference ........................................................................................................ 13

Selecting the placement method ....................................................................................... 14

When placing the main unit in a rack or on a table ........................................................... 15

When attaching the main unit to a wall ............................................................................. 16

Step 3 Wireless connections ....................................................................... 19

Active subwoofer wireless connection .............................................................................. 19

Bluetooth

connection ....................................................................................................... 19

Remote control code ..................................................................................... 20

Operations

Using this system .......................................................................................... 21

3D sound ......................................................................................................... 22

Sound menu ................................................................................................... 22

Audio format ...................................................................................................................... 23

Setup menu ..................................................................................................... 24

Linked operations with the TV

(VIERA Link “HDAVI Control

”).............................................................. 25

Reference

Troubleshooting ............................................................................................. 26

About Bluetooth

........................................................................................... 31

Unit care .......................................................................................................... 31

Licenses .......................................................................................................... 31

Specifications ................................................................................................. 32

Limited Warranty (ONLY FOR AUSTRALIA) ................................................. 37

SC-HTB690-SQT0852.book 4 ページ２０１５年４月２８日　火曜日　午前９時５４分

Getting started

Operations

Reference

Before use

Precautions

SQT0852

Before use

Supplied items

Check the supplied accessories before using this system.



≥ Product numbers are correct as of January 2015. These may be subject to change.

≥ The supplied AC mains lead is for use with this system only.

Do not use it with other equipment. Also, do not use cords from other equipment with this system.

This system (SC-HTB690)

∏ 1 Main unit (speaker)

(SU-HTB690)

∏ 1 Active subwoofer

(SB-HWA690)

Accessories

∏ 1 Remote control

(with a battery)

(N2QAYC000098)

∏ 1 IR Blaster

(SFQ0014)

∏ 2 Wall mount brackets

(RMQ2281A, RMQ2281B)

∏ 1 AC mains lead for the main unit

For the United Kingdom and Ireland

(SFQ0017)

For Continental Europe

(SFQ0015)

For Australia and New Zealand

(SFQ0021)

∏ 1 AC mains lead for the active subwoofer

For the United Kingdom and Ireland

(SFQ0018)

For Continental Europe

(SFQ0016)

For Australia and New Zealand

(SFQ0022)

∏ 2 Screws

(XYN5+J14JK)

SC-HTB690-SQT0852.book 5 ページ２０１５年４月２８日　火曜日　午前９時５４分

SQT0852

Control reference guide

1 [ ] NFC touch area (> 20)

2 [Í/I] Standby/on switch (Í/I)

Touch to switch the unit from on to standby

mode or vice versa. In standby mode, the

unit is still consuming a small amount of

power.

3[VOLj][VOLi] Adjust the volume of this

system (> 21)

4 [INPUT] Select the input source (> 21)

5 [ -PAIRING]

≥ Select the Bluetooth

device as the

source (> 21)

≥ Bluetooth

pairing (> 19)

≥ Disconnecting a Bluetooth

device (> 19)

6 Remote control signal sensor for table top

layout (> 8)

7 Remote control signal sensor for wall

mounting layout (> 8)

8 Display

9 WIRELESS LINK indicator (> 19)

These switches work just by touching the

marks. Each time you touch the switch, there

will be a beep sound.

The beep sound setting can be changed.

(> 24)

This system (Front)

3 42 5

Main unit

Active subwoofer

SC-HTB690-SQT0852.book 6 ページ２０１５年４月２８日　火曜日　午前９時５４分

Before use

SQT0852

1 HDMI AV OUT (TV (ARC)) terminal (ARC

compatible) (> 9, 10)

2 HDMI AV IN (BD/DVD) terminal (> 10)

3 OPTICAL DIGITAL AUDIO IN (TV) terminal

(> 10)

4 Ir SYSTEM terminal (> 11)

5 AC IN terminal (> 12)

6[Í/I] Active subwoofer on/off button (> 19)

§1 USB port (for service use only)

§2 The I/D SET button is only used when the

main unit is not paired with the active

subwoofer. (> 30)

This system (Rear)

Main unit

Active subwoofer

SC-HTB690-SQT0852.book 7 ページ２０１５年４月２８日　火曜日　午前９時５４分

SQT0852

1[Í] Turn the main unit on or off (> 21)

2 [INPUT] Select the input source (> 21)

3 [SETUP] Select the setup menu (> 24)

4 [SOUND] Select the sound menu (> 22)

5 [ -PAIRING]

≥ Select the Bluetooth

device as the

source (> 21)

≥ Bluetooth

pairing (> 19)

≥ Disconnecting a Bluetooth

device (> 19)

6[j VOL i] Adjust the volume of this system

(> 21)

7 [MUTE] Mute the sound (> 21)

8[4][OK][3] Select and confirm the option

∫ Before using for the first time

Remove the insulation sheet A.

≥ Dispose of the insulation sheet responsibly

after removing it.

∫ To replace a button-type battery

Battery type: CR2025 (Lithium battery)

≥ Set the button-type battery with its (i) mark

facing upward.

∫ About remote control signal sensor

The remote control signal sensor is located

on the main unit.

≥ Use the remote control within the correct

operation range.

Distance: Within approx. 7 m directly in front

Angle: Approx. 30

left and right

For table top layout

For wall mounting layout

B Remote control signal sensor for table top

layout

C Remote control signal sensor for wall

mounting layout

Remote control

SOUND

INPUT

SETUP













SC-HTB690-SQT0852.book 8 ページ２０１５年４月２８日　火曜日　午前９時５４分

Getting started

Before use

SQT0852

Getting s tarted

Step 1 Connections

≥ Turn off all equipment before connection and

read the appropriate operating instructions.

Do not connect the AC mains lead until all

other connections are completed.

1 Verify if the TV’s HDMI terminal is

labelled “HDMI (ARC)”.

2 Make the connection.

A HDMI cable

∫ HDMI (High-Definition Multimedia

Interface)

≥ The HDMI connection supports VIERA Link “HDAVI

Control” (> 25) when used with a compatible

Panasonic TV.

≥ Use the ARC compatible High Speed HDMI Cables.

Non-HDMI-compliant cables cannot be utilised.

≥ It is recommended that you use Panasonic’s HDMI

cable.

∫ HDMI standby pass-through

Even if the main unit is in standby mode, the audio and/

or video signal from the device connected to the HDMI

AV IN terminal will be sent to the TV connected to the

HDMI AV OUT terminal (the sound will not be output

from this system).

∫ 3D compatibility

Compatible with FULL HD 3D TV and Blu-ray Disc

player.

≥ The main unit can pass-through the 3D video signal

from a 3D compatible Blu-ray Disc player to a FULL

HD 3D TV.

∫ 4K/60p compatibility

Compatible with 4K Ultra HD TV and Blu-ray Disc

player.

≥ This system can pass-through the 4K content of a 4K

compatible equipment to a 4K Ultra HD TV.

≥ When connecting to 4K compatible equipment and

4K Ultra HD TV, use High Speed HDMI cables which

support 18 Gbps bandwidth.

Connection with the TV

Connection differs depending on the label

printed next to the HDMI terminal.

Labelled “HDMI (ARC)”:

Connection [A]

Not Labelled “HDMI (ARC)”:

Connection [B]

∫ What is ARC?

ARC is an abbreviation of Audio Return Channel, also

known as HDMI ARC. It refers to one of the HDMI

functions. When you connect the main unit to the

terminal labelled “HDMI (ARC)” on the TV, the optical

digital audio cable that is usually required in order to

listen to sound from a TV is no longer required, and TV

pictures and sound can be enjoyed with a single HDMI

cable.

[A] Labelled “HDMI (ARC)”

HDMI IN (ARC)



Be sure to connect to the TV’s ARC

compatible terminal. (Refer to the operating

instructions for the TV.)

SC-HTB690-SQT0852.book 9 ページ２０１５年４月２８日　火曜日　午前９時５４分

SQT0852

A HDMI cable

B Optical digital audio cable

≥ When you use the optical digital audio cable, insert

the tip correctly into the terminal.

You can direct the audio signal from the

connected Blu-ray Disc player, DVD player, Set

Top Box, etc. to this system.

Preparation

≥ Connect the main unit to the TV. (> 9)

A HDMI cable

[B] Not labelled “HDMI

(ARC)”

HDMI IN

OPTICAL

OUT





Connection from an HDMI

compatible device



≥ Refer to the operating instructions of the connected

HDMI compatible device for the necessary setting, to

output the video and audio signals.

≥ When connecting to 4K compatible equipment and 4K

Ultra HD TV, use High Speed HDMI cables which support

18 Gbps bandwidth.

HDMI OUT



e.g., Blu-ray Disc player

SC-HTB690-SQT0852.book 10 ページ２０１５年４月２８日　火曜日　午前９時５４分

Getting started

SQT0852

Depending on how the main unit is setup, it may

block the TV’s remote control signal sensor,

stopping the TV’s remote control from working.

Use the supplied Ir system cable if this occurs.

The TV remote control signals received by the

main unit are sent to the TV to operate it.

≥ For the operation range, refer to page 8.

≥ Do not use any other IR Blaster except the

supplied one.

1 Connect the jack plug to the main

unit’s Ir SYSTEM terminal.

A IR Blaster (supplied)

2 Place the infrared emitter in sight of

the TV’s remote control signal sensor.

Placement example

On the rear of the main unit:

B TV remote control signal sensor

C Infrared emitter

D Adhesive tape

3 Aim the TV’s remote control at this

system’s remote control sensor and

operate the TV.

Using the IR Blaster

(When the remote control does not

work properly)











≥ For the location of the TV’s remote control signal sensor,

refer to the operating instructions for the TV.

≥ Select a location that suits the environment.

≥ Make sure to clean the surface, where the adhesive tape

is to be attached.

≥ If you peel off the adhesive tape, the surface may

become damaged and exposed adhesive may remain.

Once you have confirmed the TV is operating correctly,

secure it by attaching the adhesive tape.

≥

When the TV receives signals from both its remote control

and the IR Blaster, their signals may interfere with each

other, making it impossible for you to operate the TV.

Try using the TV’s remote control from a different angle.

SC-HTB690-SQT0852.book 11 ページ２０１５年４月２８日　火曜日　午前９時５４分

SQT0852

≥ Connect only after all other connections

are completed.

A To a household mains socket

B AC mains lead for the main unit (supplied)

C AC mains lead for the active subwoofer

(supplied)

Insert the AC mains lead fully into the main

unit.

≥ This system consumes a small amount of AC

power (> 32) even when it is turned off. In the

interest of power conservation, if you will not

be using this system for a long time, unplug it

from the household mains socket.

AC mains lead connection







Saving energy

The main unit is designed to conserve its

power consumption and save energy.

≥ The main unit will automatically switch to

standby mode when no signal is input and

no operation is performed for approx. 20

minutes. Refer to page 24, “AUTO

POWER DOWN” to turn this function off.

SC-HTB690-SQT0852.book 12 ページ２０１５年４月２８日　火曜日　午前９時５４分

Getting started

Precautions

SQT0852

Step 2 Placement

When carrying the active subwoofer

Take care not to damage the inside speaker

unit.



≥ The speaker protection cover is attached to the speaker

unit inside the subwoofer. Remove it before use.

≥ When the subwoofer is brought close to CRT TVs and

other display devices, the magnets in the speaker may

cause some colour irregularities or image distortion. If

this happens, move the active subwoofer to a place

where these symptoms do not occur.

≥ Interference may occur if the TV has wireless LAN

functionality, causing some communication problems

(sound is interrupted, sound skips, there is a lot of noise,

etc.). If this happens, move the active subwoofer to a

place where interference does not occur.

Interference may occur if you are using other

devices (wireless LAN/microwave ovens/

cordless phones, etc.) that use the 2.4 GHz

frequency band, causing some communication

problems (sound is interrupted, sound skips,

there is a lot of noise, etc.).

If this happens, separate the other electronic

equipment from the main unit and active

subwoofer so that interference does not occur.

Safety Precautions

Professional installation is required.

The installation should never be done by

any other than a qualified installation

specialist.

PANASONIC DISCLAIMS ANY PROPERTY

DAMAGE AND/OR SERIOUS INJURY,

INCLUDING DEATH RESULTING FROM

IMPROPER INSTALLATION OR

INCORRECT HANDLING.

≥ Be sure to install the main unit as indicated within this

operating Instructions.

≥ Attach using techniques suited to the structure and

materials of the installation location.

Caution

≥ This system is to be used only as indicated

in these instructions. Failure to do so may

lead to damage to the amplifier and/or the

speaker, and may result in the risk of fire.

Consult a qualified service person if

damage has occurred or if you experience

a sudden change in performance.

≥ Do not attempt to attach the main unit to a

wall using methods other than those

described in this manual.



≥ Do not hold the main unit in one hand to avoid injury,

you may drop the main unit when carrying it.

≥ To prevent damage or scratches, lay down a soft

cloth and perform the assembly on it.

The active subwoofer

Wireless interference

A Main unit/active subwoofer

B Wireless router, cordless phone and other

electronic devices

SC-HTB690-SQT0852.book 13 ページ２０１５年４月２８日　火曜日　午前９時５４分

SQT0852

Choose a placement method that suits you best.

When placing the main unit in a rack or

on a table

≥ Place the main unit on a flat and

horizontal surface.

When attaching the main unit to a wall

≥ Place the main unit on a flat and vertical

surface.

∫ When placing the main unit in front

of the TV

The main unit may block or interfere with the

TV’s various sensors (C.A.T.S. (Contrast

Automatic Tracking System) sensor, remote

control sensor, etc.) and the 3D Eyewear

transmitters on a 3D compatible TV.

≥ If interference occurs, move the main unit

further away from the TV. If the TV still does

not function correctly, try using it in a rack or in

the wall mount position.

∫ If the TV’s remote control sensor is

blocked by the main unit

Try using the TV’s remote control from a

different angle. If the problem persists, you can

use the supplied IR Blaster to relay the signal to

the TV. (> 11)

Selecting the placement

method

Page 15

Page 16



≥ Place the active subwoofer within a few meters of the

main unit and in a horizontal position with the top

panel facing upward.

≥ Do not use the main unit or the active subwoofer in a

metal cabinet.

≥ Placing the active subwoofer too close to the walls

and corners can result in excessive bass. Cover walls

and windows with thick curtains.

≥ Keep magnetised items away. Magnetised cards,

watches, etc., can be damaged if placed too close to

the main unit and active subwoofer.

SC-HTB690-SQT0852.book 14 ページ２０１５年４月２８日　火曜日　午前９時５４分

Getting started

Precautions

SQT0852

Additionally required accessories (commercially available)

≥ Fall prevention cord ..................................................................................................................... k 2

≥ Screw eyes (to attach the fall prevention cord) ............................................................................ k 2



≥ Use commercially available screws that are capable of supporting over 26 kg.

≥ Use a cord that is capable of supporting over 26 kg (with a diameter of about 1.5 mm).

≥ Lay the unit on a blanket or soft cloth for assembly.

1 Attach the cord to the main unit.

A Cord

§ If the cord cannot be threaded through the holes, try bending the cord in 2 locations,

about 5 mm apart from the tip, at an angle of 45

(as

illustrated above).

2 Place the main unit in the desired position and attach each cord onto the rack or

table.

≥ Make sure that the slack of the cord is minimal.

≥ Do not lean the main unit against the TV or wall.

B Screw eye

≥Attach at a position capable of supporting over 26 kg.

≥Depending on the placement of the main unit, the screwing position of the screw eye may differ.

When placing the main unit in a rack or on a table





SC-HTB690-SQT0852.book 15 ページ２０１５年４月２８日　火曜日　午前９時５４分

SQT0852

The main unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the

screw used and the wall are strong enough to support the weight of at least 26 kg.

The screws and other items are not supplied as the type and size will vary with each installation.

≥ Refer to step 3 for details about the required screws.

≥ Be sure to attach the fall prevention cord as a secondary safety measure.

Supplied accessories

Additionally required accessories (commercially available)

≥ Screws for wall mounting............................................................................................................. k 2

≥ Fall prevention cord ..................................................................................................................... k 2

≥ Screw eyes (to attach the fall prevention cord) ........................................................................... k 2



≥ Use a cord that is capable of supporting over 26 kg (with a diameter of about 1.5 mm).

≥ Lay the unit on a blanket or soft cloth for assembly.

1 Attach the cord to the main unit.

A Cord

§ If the cord cannot be threaded through the holes, try bending the cord in 2 locations,

about 5 mm apart from the tip, at an angle of 45

(as

illustrated above).

When attaching the main unit to a wall

∏ 2 Screws ∏ 2Wall mount

brackets



SC-HTB690-SQT0852.book 16 ページ２０１５年４月２８日　火曜日　午前９時５４分

Getting started

Precautions

SQT0852

2 Attach the wall mount brackets to the main unit.

A Wall mount bracket (supplied)

B Screw (supplied)

3 Drive a screw into the wall.

≥ Use the measurements indicated below to identify the screwing positions on the wall.

≥ Leave at least 100 mm of space above of the main unit to allow enough space for fitting the main unit.

≥ Position the main unit with at least 50 mm of free space to its right. If not, it may not be possible to access the touch keys.

≥ Be sure to use a level to ensure that both mounting holes are level to each other.

Front view (semi-transparent image)

C At least 30 mm

D ‰4.0 mm

E ‰7.0 mm to ‰9.4 mm

F Wall or pillar

G 2.5 mm to 3.5 mm

H 374 mm I 315 mm J 261 mm

K 41 mm L 125.5 mm M Wall mounting hole















  



SC-HTB690-SQT0852.book 17 ページ２０１５年４月２８日　火曜日　午前９時５４分

SQT0852

4 Fit the main unit securely onto the screw(s).

5 Secure the cord to the wall.

≥ Make sure that the slack of the cord is minimal.

A Screw eye

B Cord

DO DO NOT

≥ Move the speaker so

that the screw is in

this position.

≥ In this position, the

speaker will likely fall

if moved to the left or

right.





SC-HTB690-SQT0852.book 18 ページ２０１５年４月２８日　火曜日　午前９時５４分

Getting started

Precautions

SQT0852

Step 3 Wireless

connections

Preparation

≥ Turn on the main unit.

1Press [Í/I].

The active subwoofer will still consume a small

amount of power even when it is turned off.

2 Check that the wireless link is

activated.

WIRELESS LINK indicator

Lights red:

The wireless link is not activated.

Lights green:

The wireless link is activated.

Blinks green:

The active subwoofer is trying to activate

the wireless link with the main unit.



The wireless link will be activated when the main unit and

the active subwoofer are both turned on.

By using the Bluetooth

connection, you can

listen to the sound from the Bluetooth

audio

device from this system wirelessly.

≥ Refer to the operating instructions of the Bluetooth

device for further instruction on how to connect a

Bluetooth

device.

Preparation

≥ Turn on the Bluetooth

feature of the device

and place the device near the main unit.

1 Press [ -PAIRING] to select

“BLUETOOTH”.

≥

If “PAIRING” is indicated on the display, go to step 3.

2 Press and hold [ -PAIRING] until

“PAIRING” is indicated on the

display.

3 Select “SC-HTB690” from the

Bluetooth

device’s Bluetooth

menu.

≥ The MAC address (e.g., 6C:5A:B5:B3:1D:0F) may be

displayed before the device name is displayed.

≥ If prompted for the passkey on the Bluetooth

device,

enter “0000”.

≥ Once the Bluetooth

device is connected, the name of

the connected device will be indicated on the display for

a few seconds.



≥ You can register up to 8 devices with this system. If a 9th

device is paired, the device that has not been used for

the longest time will be replaced.

1 Press [ -PAIRING] to select

Bluetooth

mode.

2 After confirming that “BLUETOOTH

READY” is indicated on the display,

select “SC-HTB690” from the

Bluetooth

device’s Bluetooth

menu.

∫ Disconnecting a Bluetooth

device

Press and hold [ -PAIRING] until the

“BLUETOOTH READY” is indicated on the display.



≥ When “BLUETOOTH” is selected as the source, this

system will automatically try and connect to the last

connected Bluetooth

device. If the connection attempt

fails, try to establish a connection again.

≥

This system can only be connected to one device at a time.

≥

To change the sound quality, refer to page 24 “LINK MODE”.

Active subwoofer

wireless connection

Bluetooth

connection

Bluetooth

pairing

Connecting a paired

Bluetooth

device

SC-HTB690-SQT0852.book 19 ページ２０１５年４月２８日　火曜日　午前９時５４分

SQT0852

For NFC-compatible Bluetooth

devices

(Android

devices) only

Simply by touching an NFC (Near Field

Communication)-compatible Bluetooth

device

on the main unit, you can complete all

preparations, from registering a Bluetooth

device to establishing a connection.

Preparation

≥ Turn on the NFC feature of the device.

≥ Android device version lower than 4.1

requires the installation of the app “Panasonic

Music Streaming” (free of charge).

Enter “Panasonic Music Streaming” in the search

box of Google Play

to search, and then select

“Panasonic Music Streaming”.

2 Start the app “Panasonic Music Streaming” on the

device.

– Follow on-screen instructions on your device.

– Always use the latest version of the app.

1 Press [ -PAIRING] to select

“BLUETOOTH”.

2 Touch and hold your device on the

NFC touch area of the main unit [ ].

(> 6)

Do not move the Bluetooth

device until it beeps,

displays a message or reacts in some way.

Once the Bluetooth

device has reacted, move the

device away from the main unit.

≥ When the registration and connection of the

Bluetooth

device is complete, the name of the

connected device is indicated on the display for a

few seconds.

≥ The location of the NFC touch area differs

depending on the device. When a connection

cannot be established even if your Bluetooth

device has touched the NFC touch area of the main

unit, change the position of the device or main unit.

The condition may also improve if you download the

dedicated app “Panasonic Music Streaming” and

start it up.

3 Start playback on the Bluetooth

device.



≥ If you touch another device to the main unit, you can

update the Bluetooth

connection. The previously

connected device will be disconnected automatically.

≥ When the connection is established, playback may start

automatically depending on the type of device being

used.

≥ The One-Touch Connection may not work properly

depending on the type of device being used.

Remote control code

When other Panasonic devices respond to this

system’s remote control, change the remote

control code on this system and the remote

control.

Preparation

≥ Turn off all other Panasonic products.

≥ Turn on the main unit.

≥ Aim the remote control at this unit’s remote

control sensor.

∫ To set the code to “REMOTE 2”

While pressing and holding [MUTE], press and

hold [OK] for 4 or more seconds.

“REMOTE 2” is indicated on the display.

∫ To set the code to “REMOTE 1”

While pressing and holding [MUTE], press and

hold [

] for 4 or more seconds.

“REMOTE 1” is indicated on the display.

One-Touch Connection

(Connecting by NFC)

SC-HTB690-SQT0852.book 20 ページ２０１５年４月２８日　火曜日　午前９時５４分

Pagina se încarcă...

Panasonic SCHTB690EG Manualul proprietarului

Marca: Panasonic

Model: SCHTB690EG

Categorie: Seturi de difuzoare

Tip: Manualul proprietarului

Acest manual este potrivit și pentru

Descărcați PDF

raport

în alte limbi

English: Panasonic SCHTB690EG Owner's manual

Lucrări înrudite

Alte documente

LG NB4530A Manualul utilizatorului