Panasonic SCHTB258EB Manualul proprietarului

SCHTB258EB
Panasonic
Marca
Panasonic
Model
SCHTB258EB
Tip
Manualul proprietarului
Operating Instructions
Home Theater Audio System
Model No. SC-HTB258
SC-HTB250
SC-HTB208
SC-HTB200
TQBJ2086
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
GNEGEB
“EB” indicates the United Kingdom model.
This illustration shows SC-HTB250.
TQBJ2086_en.fm Page 1 Wednesday, December 27, 2017 2:30 PM
offset printing
2
TQBJ2086
Safety precautions
WARNING!
Unit
• To reduce the risk of fire, electric shock or
product damage,
– Do not expose this unit to rain, moisture,
dripping or splashing.
– Do not place objects filled with liquids, such as
vases, on this unit.
– Use the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer
servicing to qualified service personnel.
AC mains lead
• To reduce the risk of fire, electric shock or
product damage,
– Ensure that the power supply voltage
corresponds to the voltage printed on this unit.
– Insert the mains plug fully into the socket
outlet.
– Do not pull, bend, or place heavy items on the
lead.
– Do not handle the plug with wet hands.
– Hold onto the mains plug body when
disconnecting the plug.
– Do not use a damaged mains plug or socket
outlet.
Small objects
• Keep the speaker feet out of reach of children to
prevent swallowing.
Button-type battery (Lithium battery)
• Risk of fire, explosion and burns. Do not
recharge, disassemble, heat above 60°C or
incinerate.
CAUTION!
Unit
• To reduce the risk of fire, electric shock or
product damage,
– Do not install or place this unit in a bookcase,
built-in cabinet or in another confined space.
Ensure this unit is well ventilated.
– Do not obstruct this unit’s ventilation openings
with newspapers, tablecloths, curtains, and
similar items.
– Do not place sources of naked flames, such as
lighted candles, on this unit.
• This unit is intended for use in moderate
climates.
• This unit may receive radio interference caused
by mobile telephones during use. If such
interference occurs, please increase separation
between this unit and the mobile telephone.
• Product Identification Marking is located on the
bottom of the unit.
• Set the unit up on an even surface away from
direct sunlight, high temperatures, high humidity,
and excessive vibration.
• This system might get warm after prolonged
usage. This is normal. Do not be alarmed.
AC mains lead
• The mains plug is the disconnecting device.
Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.
Button-type battery (Lithium battery)
• Danger of explosion if battery is incorrectly
replaced. Replace only with the type
recommended by the manufacturer.
• When disposing of the batteries, please contact
your local authorities or dealer and ask for the
correct method of disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to
direct sunlight for a long period of time with
doors and windows closed.
• Insert with poles aligned.
• Remove the battery if you do not use the remote
control for a long period of time. Keep in a cool,
dark area.
WARNING
DO NOT INGEST BATTERY,
CHEMICAL BURN HAZARD
This remote control contains a coin/button cell
battery. If the coin/button cell battery is
swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Keep new and used batteries away from
children. If the battery compartment does not
close securely, stop using the remote control and
keep it away from children.
If you think batteries might have been swallowed
or placed inside any part of the body, seek
immediate medical attention.
TQBJ2086_en.fm Page 2 Wednesday, December 27, 2017 2:30 PM
offset printing
3
TQBJ2086
Caution for AC mains lead
(For the AC mains plug of three pins)
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded three
pin mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please
ensure that the replacement fuse has a rating of
5-ampere and that it is approved by ASTA or BSI
to BS1362.
Check for the ASTA mark or the BSI mark on
the body of the fuse.
If the plug contains a removable fuse cover you
must ensure that it is refitted when the fuse is
replaced.
If you lose the fuse cover the plug must not be
used until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type
of AC mains plug (figures A and B). Confirm the
AC mains plug fitted and follow the instructions
below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse
cover.
The symbols on this product (including the
accessories) represent the following:
Sales and Support Information
For the United Kingdom and Ireland
Customer Communications Centre
• For customers within the UK: 0344 844 3899
• For customers within Ireland: 01 289 8333
• Monday – Friday 9:00am – 5:00pm (Excluding
public holidays).
• For further support on your product, please visit
our website: www.panasonic.co.uk
Direct Sales at Panasonic UK
• Order accessory and consumable items for your
product with ease and confidence by phoning
our Customer Communications Centre Monday
– Friday 9:00am – 5:00pm (Excluding public
holidays).
• Or go on line through our Internet Accessory
ordering application at www.pas-europe.com
.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution
facilities are provided directly by Panasonic UK.
• It couldn’t be simpler!
• Also available through our Internet is direct
shopping for a wide range of finished products.
Take a browse on our website for further details.
Table of contents
Safety precautions. . . . . . . . . . . . . . . . . . . . . . . . 2
Caution for AC mains lead. . . . . . . . . . . . . . . . . . 3
Sales and Support Information . . . . . . . . . . . . . . 3
Supplied items . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Overview of controls . . . . . . . . . . . . . . . . . . . . . .7
Making the connections . . . . . . . . . . . . . . . . . . . . 9
Basic control . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Advanced operations . . . . . . . . . . . . . . . . . . . . . 12
HDMI CEC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .14
Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Indicators illumination . . . . . . . . . . . . . . . . . . . . 17
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Limited Warranty (For Australia only). . . . . . . . . 23
Figure A Figure B
Figure A Figure B
Fuse cover
Fuse (5 ampere)
Fuse (5 ampere)
AC
Class II equipment (The construction of the
product is double-insulated.)
ON
Standby
TQBJ2086_en.fm Page 3 Wednesday, December 27, 2017 2:30 PM
offset printing
4
TQBJ2086
[HTB258]: Indicate features applicable to SC-HTB258 only.
[HTB250]: Indicate features applicable to SC-HTB250 only.
[HTB208]: Indicate features applicable to SC-HTB208 only.
[HTB200]: Indicate features applicable to SC-HTB200 only.
Supplied items
Product numbers correct as of January 2018. These may be subject to change.
This system
Accessories
Check and identify the supplied accessories.
1 Main unit (speaker)
[HTB258]: SU-HTB258
[HTB250]: SU-HTB250
[HTB208]: SC-HTB208
[HTB200]: SC-HTB200
[HTB258] [HTB2 50]
1 Active subwoofer
(SB-HWA250)
1 AC mains leads
For the United Kingdom and Ireland
(TSXA170)
For Australia and New Zealand
(TSXA172)
For others
(TSXA168)
1 Remote control (with a
battery)
[HTB258] [HTB250]
(N2QAYC000126)
[HTB208] [HTB200]
(N2QAYC000123)
[HTB258] [HTB250]
4 Speaker feet (for active
subwoofer)
(TMKK727)
TQBJ2086_en.fm Page 4 Wednesday, December 27, 2017 2:30 PM
offset printing
5
TQBJ2086
References
About Bluetooth
®
Frequency band
• This system uses the 2.4 GHz frequency band.
Certification
• This system conforms to the frequency
restrictions and has received certification based
on frequency laws. Thus, a wireless permit is not
necessary.
• The actions below are punishable by law in
some countries:
– Taking apart or modifying the unit.
– Removing specification indications.
Restrictions of use
• Wireless transmission and/or usage with all
Bluetooth
®
equipped devices is not guaranteed.
• All devices must conform to standards set by the
Bluetooth SIG, Inc.
• Depending on the specifications and settings of
a device, it can fail to connect or some
operations can be different.
• This system supports Bluetooth
®
security
features. But depending on the operating
environment and/or settings, this security is
possibly not sufficient. Transmit data wirelessly
to this system with caution.
• This system cannot transmit data to a Bluetooth
®
device.
Range of use
• Use this device at a maximum range of 10 m.
• The range can decrease depending on the
environment, obstacles or interference.
Interference from other devices
• This system may not function properly and
troubles such as noise and sound jumps may
arise due to radio wave interference if this unit is
located too close to other Bluetooth
®
devices or
the devices that use the 2.4 GHz band.
• This system may not function properly if radio
waves from a nearby broadcasting station, etc.
is too strong.
Intended usage
• This system is for normal, general use only.
• Do not use this system near an equipment or in
an environment that is sensitive to radio
frequency interference (example: airports,
hospitals, laboratories, etc.).
Licenses
Placement
Place the main unit in a rack or on a table.
When placing the main unit in front of the TV
The main unit may block or interfere with the TV’s
various sensors and the 3D Eyewear transmitter of
a 3D compatible TV. If interferences occur, move
the main unit further away from the TV. If the TV
still does not function correctly, try using it in a
rack.
Panasonic bears no responsibility for data and/or
information that is compromised during a
wireless transmission.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited.
DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
Digital Surround is a trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States
and other countries.
The Bluetooth
®
word mark and logos are
registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by
Panasonic Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
TQBJ2086_en.fm Page 5 Wednesday, December 27, 2017 2:30 PM
offset printing
6
TQBJ2086
Placement of the active subwoofer
[HTB258] [HTB250]
You can place the subwoofer vertically or horizontally.
Based on your option of subwoofer placement, paste the supplied speaker feet on the subwoofer
accordingly.
Vertical placement
Horizontal placement
Note:
• Place the system on a flat safe surface.
• Do not put the system in a metal cabinet.
• Place the active subwoofer within a few meters from the main unit.
• Depending on the position of the active subwoofer, the effect may vary.
Placing the active subwoofer too close to the walls and corners can result in excessive bass. Cover walls and windows with
thick curtains.
You may change the position of the active subwoofer, or adjust the subwoofer level (~12) to achieve optimum effect.
• Keep other 2.4 GHz frequency band electronic devices such as wireless router, cordless phone, etc. at least 2 m away from
this system to avoid wireless interference.
• If irregular colouring occurs on the TV, switch off the TV for 30 minutes. If the demagnetising of the TV does not correct the
problem, increase the distance between this system and the TV.
• Keep magnetised items away. Magnetised cards, watches, etc., can be damaged if put too near to the system.
For stability and to avoid injury, when the subwoofer is placed
vertically,
• Do not stack any object on the subwoofer.
• Do not allow children to climb on the subwoofer.
• Be careful when babies or children are near.
Speaker feet
Protection layer
(not supplied)
Speaker feet
Protection layer
(not supplied)
TQBJ2086_en.fm Page 6 Wednesday, December 27, 2017 2:30 PM
offset printing
7
TQBJ2086
Overview of controls
Main unit
A Standby/on switch [1]
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
B Adjust the volume level (~12)
C Select the input source
D Select the Bluetooth
®
device as the source
To start Bluetooth
®
pairing, press and hold [ ].
E MUSIC indicator
F CINEMA indicator
G HDMI (ARC) indicator
H OPTICAL indicator
I (Bluetooth
®
) indicator
J Remote control sensor
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left
and right
K OPTICAL DIGITAL AUDIO IN terminal
L USB port (for software update) (~16)
M HDMI (ARC) terminal (ARC compatible)
Front
Rear
HDMI (ARC)
OPTICAL
Active subwoofer
[HTB258] [HTB250]
The I/D SET button is only used when the main
unit is not paired with the active subwoofer.
Front
Rear
WIRELESS LINK
indicator
TQBJ2086_en.fm Page 7 Wednesday, December 27, 2017 2:30 PM
offset printing
8
TQBJ2086
Remote control
[HTB258] [HTB250]
[HTB208] [HTB200]
A Switch the main unit on or off
B [HTB258] [HTB250]
Adjust the subwoofer level (~12)
C Dim the indicators on the main unit
D Select the sound mode (~12)
E Select the HDMI (ARC) device as the source
F Select the optical device as the source
G Adjust the volume level (~12)
H Mute the sound (~12)
I Select the Bluetooth
®
device as the source
To start Bluetooth
®
pairing, press and hold
[ -PAIRING ].
█
Preparing the remote control
Before using for the first time
Remove the insulation sheet.
Replacing the battery
Replace with a new battery (CR2025 lithium
battery).
Insert a new battery with the (+) side facing up.
Insulation
sheet
TQBJ2086_en.fm Page 8 Wednesday, December 27, 2017 2:30 PM
offset printing
9
TQBJ2086
Making the connections
Switch off all equipment before connection.
Components and cables are sold separately.
Connect the AC mains lead only after all the other connections have been made.
Connecting the TV
█
Connect an ARC compatible TV
Connect to the ARC compatible terminal of the TV with an ARC compatible high speed HDMI cable.
ARC (Audio Return Channel)
ARC is an HDMI function that lets you enjoy both sound and TV pictures with one HDMI cable, the optical
digital audio cable that is usually required in order to listen to sound from a TV is no longer required.
█
Connect a non-ARC compatible TV
When connecting the optical digital audio cable, observe the orientation and insert the tip correctly into
the terminal.
HDMI IN
(ARC)
TV
HDMI cable
OPTICAL
OUT
TV
Optical digital audio cable
TQBJ2086_en.fm Page 9 Wednesday, December 27, 2017 2:30 PM
offset printing
10
TQBJ2086
Connecting a 4K Ultra HD TV
The system cannot pass-through the 4K video signal of a 4K compatible equipment to a 4K Ultra HD TV.
However, you can connect the system to a 4K Ultra HD TV to enjoy the 4K content.
* Make sure to connect the HDMI cable to ARC compatible terminals.
Note:
• Refer to the operating instructions of the 4K Ultra HD TV (VIERA) and the 4K/60p compatible equipment for setup and for
playing the 4K content.
• To enjoy multi-channel output from this system, set the audio output of other equipment to Bitstream.
• The audio signal input to this system is up to 5.1 channels.
Connecting the AC mains lead
Conserving power
The system consumes a small amount of power when it is in standby mode. Disconnect the power supply
if you do not use the system.
Note:
The active subwoofer is in the standby condition when the AC mains lead is connected. The primary circuit is always “live” as long
as the AC mains lead is connected to an electrical outlet.
The main unit will automatically switch to standby mode when no signal is input and no operation is
performed for approx. 20 minutes. Refer to page 13 “Auto power down” to switch this function off.
HDMI IN
(ARC)
HDMI IN
(4K)
TV
HDMI
OUT
e.g., Blu-ray Disc player
(4K compatible)
HDMI cable*
HDMI cable
[HTB258] [HTB250]
AC mains lead (supplied)
To household
mains socket
To household
mains socket
TQBJ2086_en.fm Page 10 Wednesday, December 27, 2017 2:30 PM
offset printing
11
TQBJ2086
Bluetooth
®
connection
You can connect and play an audio device
wirelessly through Bluetooth
®
.
Preparation
• Switch on the main unit.
• Switch on the Bluetooth
®
feature of the device
and put the device near the system.
• Read the operating instructions of the device for
details.
█
Pairing a device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (~right).
1 Press [ -PAIRING].
If the “ ” indicator blinks quickly, continue with
step 3.
2 Press and hold [ -PAIRING] until the “ ”
indicator blinks quickly.
If the “ ” indicator blinks slowly, repeat this
step.
3 Select “SC-HTB258”, “SC-HTB250”,
“SC-HTB208” or “SC-HTB200” from the
Bluetooth
®
menu of the device.
The MAC address (e.g., 6C:5A:B5:B3:1D:0F)
may be shown before “SC-HTB258”,
“SC-HTB250”, “SC-HTB208” or “SC-HTB200”
is shown.
If prompted for a passkey, input “0000” or
“1234”.
Once the Bluetooth
®
device is connected, the
“ ” indicator stops blinking and lights up.
Note:
You can pair up to 8 devices with this system. If a 9th device is
paired, the device that has not been used for the longest time
will be replaced.
█
Connecting a paired device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (~right).
1 Press [ -PAIRING].
2 Select “SC-HTB258”, “SC-HTB250”,
“SC-HTB208” or “SC-HTB200” from the
Bluetooth
®
menu of the device.
█
Disconnecting a device
Press and hold [ -PAIRING] until the “ ”
indicator blinks slowly.
Note:
• This system can only connect to one device at a time.
• When “ ” is selected as the source, this system will
automatically try to connect to the last connected device.
• The Bluetooth
®
device will be disconnected when you select
another source.
Active subwoofer wireless connection
[HTB258] [HTB250]
Preparation
Switch on the main unit.
Check that the wireless link is activated.
WIRELESS LINK indicator
Lights up: The wireless link is activated.
Lights off: The wireless link is not activated.
Blinks: The active subwoofer is trying to activate
the wireless link with the main unit.
Note:
• The wireless link will be activated when the main unit and
the active subwoofer are both switched on.
• The I/D SET button is only used when the main unit is not
paired with the active subwoofer. (~16)
WIRELESS LINK
TQBJ2086_en.fm Page 11 Wednesday, December 27, 2017 2:30 PM
offset printing
12
TQBJ2086
Basic control
Preparation
Switch on the TV and/or connected device.
1 Press [`] to switch on the system.
2 Select the source.
HDMI: Press [HDMI (ARC)] on the remote
control or [INPUT] on the main unit.
OPTICAL: Press [OPTICAL] on the remote
control or [INPUT] on the main unit.
(Bluetooth
®
): Press [ -PAIRING] on the
remote control or [ ] on the
main unit.
3 Press [+ VOL ‒] to adjust the volume of the
system.
Volume range: 0 to 100
The indicators will scroll every time you adjust
the volume, and stop blinking when reached
the minimum or maximum level.
When “ ” is selected as the source
Select this system as the output speaker from the
menu of the connected Bluetooth
®
device.
When “OPTICAL” is selected as the source
On the TV and the connected device, select the
TV’s input for this system and starts playback on
the connected device.
█
To select the sound mode
Press [SOUND].
█
To mute the sound
Press [MUTE].
All indicators blinks simultaneously.
To cancel, press [MUTE] again or adjust the
volume.
█
To adjust the subwoofer level
[HTB258] [HTB250]
Press [SUBWOOFER +] or [SUBWOOFER ‒] to
adjust the level.
Advanced operations
Dual audio
Sets the preferred audio channel mode when there
are two audio modes received by this system.
Press and hold [MUTE] for a minimum of
4 seconds.
Note:
• This effect only works if the audio output of the TV or player
is set to “Bitstream” and “Dolby Dual Mono” is available in
the sound source.
• The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
Sound mode Indication
Standard
Best suited for dramas and comedy
shows.
Music
Enhance the sound of musical
instruments and songs.
Cinema (default)
Produces three-dimensional sound
unique to movies.
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA
MUSIC CINEMA
MUSIC CINEMA
Indication Effect levels
4 Highest
3
2
1 Lowest
Audio mode Indication
Main
(default)
Secondary
Main +
Secondary
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
TQBJ2086_en.fm Page 12 Wednesday, December 27, 2017 2:30 PM
offset printing
13
TQBJ2086
Audio format
You can view the current audio format.
Press and hold [SOUND] for a minimum of
4 seconds.
Note:
• The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
• The indicators may work differently if the main unit detects
an unsupported audio format from the connected TV.
• This function does not work when is selected as the
source.
Auto power down
The main unit is automatically switched off if there
is no audio input and when you do not use it for
approx. 20 minutes.
Press and hold [HDMI (ARC)] for a minimum of
4 seconds to select the mode.
Note:
• The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
• The setting is maintained until it is changed again.
Bluetooth
®
standby
This function allows you to connect a paired
Bluetooth
®
device when the main unit is in standby
mode.
Press and hold [OPTICAL] for a minimum of
4 seconds.
Note:
• The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
• The setting is maintained until it is changed again.
• If the AC mains lead is disconnected, the Bluetooth
®
standby function may not work. Make the setting again.
Volume limitation
The volume is set to 50 when you switch on the
system although the volume is set to above 50
before it is switched off.
Press and hold [DIMMER] for a minimum of
4 seconds.
Note:
• The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
• The setting is maintained until it is changed again.
Audio mode Indication
Dolby Digital
DTS
®
PCM
Mode Indication
On (default)
Off
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
Mode Indication
On
Off (default)
Mode Indication
On (default)
Off
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
TQBJ2086_en.fm Page 13 Wednesday, December 27, 2017 2:30 PM
offset printing
14
TQBJ2086
HDMI CEC
This unit supports “HDMI CEC” (Consumer
Electronics Control) function.
See the operating instructions for connected
equipment for operational details.
Preparation
Confirm that the HDMI connection has been made.
(~9, 10)
Power on link
When the TV is switched on, the main unit also
switches on automatically. (This function does not
work when OPTICAL or Bluetooth
®
is the source.)
Power off link
When the TV is switched off, the main unit also
switches off automatically. (This function does not
work when OPTICAL or Bluetooth
®
is the source.)
Volume adjustment
You can control the volume setting of this system
using the volume or mute button on the TV remote
control.
If the TV’s speaker selection is changed to the TV
speakers, the main unit’s speakers are muted.
Muting will be cancelled by selecting the main
unit’s speakers again.
Changing speakers
When the main unit switches on, this system will
be selected as the TV’s speakers automatically.
When you switch off the main unit, TV speakers
will be automatically activated.
Note:
The operation cannot be guaranteed on all HDMI CEC
equipment.
Troubleshooting
Before requesting service, make the following
checks. If you are in doubt about some of the
check points, or if the solutions indicated do not
solve the problem, consult your dealer for
instructions.
█
Common problems
No power
• After connecting the AC mains lead, wait about
10 seconds before switching on the main unit.
• Disconnect the AC mains lead for 10 seconds
before connect again.
• After switching on the main unit, if the main unit
immediately switches off, disconnect the AC mains
lead and consult your dealer.
• If the main unit does not switch on when switching
on TV (HDMI CEC), switch on the main unit
manually.
No operations can be done with the remote
control.
• Remove the insulation sheet before you use the
remote control for the first time. (~8)
• Examine that the battery is installed correctly.
(~8)
• The battery is weak. Replace it with a new one.
(~8)
• Set the remote control code again after replacing
the battery. (~16)
• Use the remote control within the correct operation
range. (~7)
The system automatically switched to standby
mode
• “Auto power down” function is on.
The system automatically switches to standby mode
if there is no signal input and no operation is being
performed for approximately 20 minutes. Refer to
page 13 to switch off this function.
█
Bluetooth
®
Pairing cannot be done.
• Check the Bluetooth
®
device condition.
• The device is out of the 10 m communication range.
Move the device nearer to the system.
The device cannot be connected.
• The pairing of the device was unsuccessful. Do
pairing again.
• The pairing of the device has been replaced. Do
pairing again.
• This system might be connected to a different
device. Disconnect the other device and try
connecting the device again.
• The system may have a problem. Switch off the
system and then switch on again.
TQBJ2086_en.fm Page 14 Wednesday, December 27, 2017 2:30 PM
offset printing
15
TQBJ2086
The device is connected but audio cannot be
heard through the system.
• For some built-in Bluetooth
®
devices, you have to
set the audio output to “SC-HTB258”
, “SC-HTB250”,
“SC-HTB208” or “SC-HTB200” manually. Read the
operating instructions of the device for details.
Sound from the device is interrupted.
• The device is out of the 10 m communication range.
Move the device nearer to the system.
• Remove any obstacle between the system and the
device.
• Other devices that use the 2.4 GHz frequency band
(wireless router, microwaves, cordless phones, etc.)
are interfering. Move the device nearer to the
system and distance it from the other devices.
█
HDMI
HDMI CEC related operations no longer function
properly.
• Check the setting on the connected devices.
– Switch on HDMI CEC function on the connected
devices.
– Select this system as the speaker in the TV’s
HDMI CEC menu.
• When the HDMI connections are changed, after a
power failure or after the AC mains lead has been
removed, HDMI CEC operations may not function
properly.
– Switch on all the devices that are connected to
the TV with an HDMI cable and then switch on the
TV.
– Switch off the HDMI CEC settings of the TV and
switch it on again. For details refer to the
operating instructions for the TV.
– While the system and the TV are connected with
an HDMI cable, switch on the TV, disconnect the
AC mains lead of this system and then connect it
again.
█
Sound
No sound
• Cancel muting. (~12)
• Check the connections to the other devices.
(~9, 10)
• Make sure that the received audio signal is
compatible with this system.
• If the system is connected to the TV with an HDMI
cable only, make sure that the HDMI terminal of the
TV is labelled “HDMI (ARC)”. If not, connect an
optical digital audio cable. (~9, 10)
• Check the connections. Change the cables if the
connections are correct.
• Check the audio output settings on the connected
device.
The dual audio cannot be changed from main to
secondary.
• If the audio received from the connected device is
not “Dolby Dual Mono” or the output setting is not
“Bitstream”, the setting cannot be changed from this
system. Change the setting on the connected
device.
The volume is lowered when the system is
switched on.
• “Volume limitation” is on. (~13)
• If the system is switched off with the volume above
50, the volume will automatically set to 50 when you
switch on the system. (
~13)
The sound lags behind the image.
• Depending on the TV, when this system is
connected to it via Bluetooth
®
, the sound output
from this system may lag behind the TV image.
Connect this system and the TV with an HDMI
cable/optical digital audio cable. (~9, 10)
The audio format indicator does not correspond
to the playback source.
• If the playback source is Dolby Digital or DTS
®
, set
the audio output setting of the connected equipment
(e.g., TV, player) to bitstream. For details, refer to
the operating instructions for the connected
equipment.
There is no audio.
The power of the main unit switches off
automatically.
(When the main unit detects a problem, a safety
measure is activated and the main unit automatically
switches to standby mode.)
• There is a problem with the amplifier.
• Is the volume extremely high?
If so, lower the volume.
• Is this system placed in an extremely hot place?
If so, move this system to a cooler place and wait a
few moments and then try to switch it on again.
If the problem persists, confirm the indicators status,
switch off this system, disconnect the AC mains lead
and consult your dealer. Please be sure to remember
the indicators status and inform the dealer.
█
Active subwoofer
No power.
• Make sure the AC mains lead of the active
subwoofer is connected.
After switching on the subwoofer, it immediately
switches off.
• Disconnect the AC mains lead and consult your
dealer.
No sound from the subwoofer.
• Check that the active subwoofer is switched on.
• Check that the WIRELESS LINK indicator lights up.
(~11)
TQBJ2086_en.fm Page 15 Wednesday, December 27, 2017 2:30 PM
offset printing
16
TQBJ2086
The WIRELESS LINK indicator does not lights up.
• There is no link between the main unit and the
active subwoofer.
Check that the main unit is switched on.
• The active subwoofer and the main unit may not be
paired correctly. Try the following operation.
(Wireless pairing)
A Switch on the main unit.
B Press and hold [I/D SET] on the rear of active
subwoofer for a minimum of 4 seconds.
The wireless link indicator will blink.
C Press [MUTE], [SOUND]*, [MUTE]*,
[ -PAIRING]* consecutively.
* Within 3 seconds.
“ ”, “OPTICAL” and “HDMI (ARC)” indicators
will blink in rotation.
When the wireless link pairing is successful, “ ”,
“OPTICAL” and “HDMI (ARC)” indicators will switch
off.
Consult your dealer if the problem persists.
Remote control code
When other Panasonic equipment responds to the
remote control of this system, change the remote
control code for this system.
Preparation
• Switch off all other Panasonic products.
• Switch on this system.
• Aim the remote control at the remote control
sensor of this system.
█
To set the code to code 2
Press and hold [ -PAIRING] and [SOUND] on
the remote control for a minimum of
4 seconds.
█
To set the code to code 1
Press and hold [ -PAIRING] and [DIMMER] on
the remote control for a minimum of
4 seconds.
System memory reset
Reset the memory when the following situations
occur:
• There is no response when buttons are pressed.
• You want to clear and reset the memory
contents.
Press and hold [1] on the main unit for a
minimum of 4 seconds.
All the indicators blink until the system restarts.
Note:
The remote control code will set back to code 1 after memory
reset, refer to “Remote control code” on how to change to
code 2.
Unit care
Disconnect the AC mains lead before
maintenance. Clean this system with a soft, dry
cloth.
• When dirt is heavy, wring a cloth moistened in
water tightly to wipe the dirt, and then wipe it
with a dry cloth.
• When cleaning the speakers, use a fine cloth.
Do not use tissues or other materials (towels,
etc.) that can fall apart. Small grains may get
stuck inside the speaker cover.
• Never use alcohol, paint thinner or benzine to
clean this system.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
To dispose or transfer this system
This system may keep the user settings
information in the main unit. If you discard the
main unit either by disposal or transfer, then follow
the procedure to return all the settings to the
factory presets to delete the user settings.
(
~above)
• The operation history may be recorded in the
memory of the main unit.
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
Software update
Occasionally, Panasonic may release updated
software for this unit that may add or improve the
way a feature operates. These updates are
available free of charge. For more details, refer
to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
TQBJ2086_en.fm Page 16 Wednesday, December 27, 2017 2:30 PM
offset printing
17
TQBJ2086
Indicators illumination
The indicators show the condition of this system. The indicator patterns illustrated below are shown
during normal operational conditions. They do not refer to the indications of a problem.
Indicators Description
The indicator blinks for 5 seconds.
• When the setting is on
(“Auto power down”, “Bluetooth
®
standby”, “Volume limitation”)
(
~13)
• When the audio format is Dolby Digital. (~13)
• When the dual audio is main. (~12)
The indicator blinks for 5 seconds.
• When the audio format is DTS
®
. (~13)
The indicator blinks for 5 seconds.
• When the setting is off
(“Auto power down”, “Bluetooth
®
standby”, “Volume limitation”)
(
~13)
• When the audio format is PCM. (~13)
• When the dual audio is secondary. (~12)
The indicator blinks quickly.
• When the main unit is ready for pairing. (~11)
The indicator blinks slowly.
• When the main unit is waiting to connect. (~11)
The indicator lights on.
• When the main unit is connected to a Bluetooth
®
device.
(
~11)
The indicator blinks for 5 seconds.
• When the dual audio is main+secondary. (~12)
The indicator blinks for 10 seconds.
• When the remote control is set to code 2. (~16)
The indicator blinks for 10 seconds.
• When the remote control is set to code 1. (~16)
The indicators blink until the system restarts.
• When the main unit is reset. (~16)
The indicators blink continuously.
• When the sound is muted. (~12)
The indicators blink 10 times.
• When active subwoofer is failed to connect. (~16)
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
MUSIC CINEMA HDMI(ARC) OPTICAL
TQBJ2086_en.fm Page 17 Wednesday, December 27, 2017 2:30 PM
offset printing
18
TQBJ2086
Specifications
█
Amplifier section
[HTB258] [HTB250]
RMS output power: Dolby Digital Mode
Front ch 40 W per channel (6 Ω),
1 kHz, 10% THD
Subwoofer ch 40 W per channel (4 Ω),
100 Hz, 10% THD
Total RMS Dolby Digital mode power 120 W
[HTB208] [HTB200]
RMS output power stereo mode (both ch
driven)
Front ch 40 W per channel (6 Ω),
1 kHz, 10% THD
Total RMS Stereo mode power 80 W
█
Terminals section
HDMI output (ARC)
Output connector Type A (19 pin)
Digital audio input
Optical digital input Optical terminal
Sampling frequency 32 kHz, 44.1 kHz, 48 kHz
Audio format LPCM, Dolby Digital,
DTS Digital Surround
TM
USB Port For software update
█
Bluetooth
®
section
Version Bluetooth
®
Ver. 2.1 + EDR
Class Class 2
Supported profiles A2DP
Operating frequency 2.4 GHz band FH-SS
Frequency band 2402 MHz to 2480 MHz
Operation distance 10 m line of sight
Maximum RF Power 4 dBm
Supported codec SBC
█
Speaker section
Front speakers (Built-in)
Full range 4 x 10 cm (Cone type) x 1/ch
Active subwoofer [HTB258] [HTB250]
Woofer 14 cm cone type x 1
█
Wireless section
Wireless module
Frequency range 2404 MHz to 2476 MHz
No. of channels 38
RF output power 7 dBm (max.)
█
General
Power supply AC 220 V to 240 V, 50 Hz
Power consumption
Main unit 15 W
Active subwoofer [HTB2 58] [HTB250] 7.5 W
Dimensions (W x H x D)
Main unit 450 mm x 51 mm x 135 mm
Active subwoofer [HTB2 58] [HTB250]
97 mm x 451 mm x 307 mm
Mass
Main unit 1.6 kg
Active subwoofer [HTB2 58] [HTB250] 4.4 kg
Operating temperature range 0°C to +40°C
Operating humidity range
20% to 80% RH (no condensation)
Note:
• Specifications are subject to change without notice.
Mass and dimensions are approximate.
• Total harmonic distortion is measured by the digital
spectrum analyser.
Power consumption in standby mode
(approximate)
Main unit
When Bluetooth
®
standby is off 0.5 W
When Bluetooth
®
standby is on 2.0 W
Active subwoofer [HTB258] [HTB2 50] 0.5 W
When wireless activated in network standby
2.0 W
TQBJ2086_en.fm Page 18 Wednesday, December 27, 2017 2:30 PM
offset printing
19
TQBJ2086
Disposal of Old Equipment and Batteries
Only for European Union and countries with
recycling systems
These symbols on the products,
packaging, and/or accompanying
documents mean that used electrical
and electronic products and batteries
must not be mixed with general
household waste.
For proper treatment, recovery and
recycling of old products and used
batteries, please take them to
applicable collection points in
accordance with your national
legislation.
By disposing of them correctly, you will
help to save valuable resources and
prevent any potential negative effects
on human health and the environment.
For more information about collection
and recycling, please contact your local
municipality.
Penalties may be applicable for
incorrect disposal of this waste, in
accordance with national legislation.
Note for the battery symbol (bottom
symbol):
This symbol might be used in
combination with a chemical symbol. In
this case it complies with the
requirement set by the Directive for the
chemical involved.
TQBJ2086_en.fm Page 19 Wednesday, December 27, 2017 2:30 PM
offset printing
20
TQBJ2086
Safety information for customers in the EU
English
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this
product is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
Customers can download a copy of the original DoC to
our RE products from our DoC Server:
http://www.ptc.panasonic.eu
Contact to Authorised Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing
Centre, Winsbergring 15, 22525 Hamburg, Germany
Ελληνικά
Δήλωση συμμόρφωσης (DoC)
Η “Panasonic Corporation” δηλώνει ότι το προϊόν αυτό
είναι συμμορφωμένο προς τις βασικές απαιτήσεις και
άλλες σχετικές διατάξεις της Οδηγίας 2014/53/EΕ.
Οι πελάτες μπορούν να κατεβάσουν ένα αντίγραφο του
πρωτοτύπου DoC για τα RE προϊόντα μας από τον DoC
server μας:
http://www.ptc.panasonic.eu
Επικοινωνήστε με τον Εξουσιοδοτημένο Αντιπροσωπό
μας:
Panasonic Marketing Europe GmbH, Panasonic Testing
Centre, Winsbergring 15, 22525 Hamburg, Γερμανία
Português
Declaração de Conformidade (DoC)
Com o presente documento, a “Panasonic Corporation”
declara que este produto se encontra em conformidade
com os requisitos específicos e demais especificações
referentes à Diretiva 2014/53/UE.
Os clientes podem baixar uma cópia da declaração de
conformidade (DoC) para nossos produtos RE do Server
DoC:
http://www.ptc.panasonic.eu
Contacto com um Representante Autorizado:
Panasonic Marketing Europe GmbH, Panasonic Testing
Centre, Winsbergring 15, 22525 Hamburg, Alemanha
Lietuviškai
Atitikties deklaracija (AD)
Bendrovė “Panasonic Corporation” patvirtina, kad šis
gaminys atitinka direktyvos 2014/53/ES esminius
reikalavimus ir kitas taikytinas nuostatas.
Mūsų RE gaminių originalios atitikties deklaracijos kopiją
klientai gali atsisiųsti iš mūsų AD serverio:
http://www.ptc.panasonic.eu
Įgaliotojo atstovo adresas:
Panasonic Marketing Europe GmbH, Panasonic Testing
Centre, Winsbergring 15, 22525 Hamburg, Vokietija
Slovensko
Izjava o skladnosti (DoC)
“Panasonic Corporation” v tem dokumentu izjavlja, da je
izdelek v skladu z bistvenimi zahtevami in drugimi
pomembnimi določbami Direktive 2014/53/EU.
Stranka lahko naloži izvod izvirnega DoC o naših izdelkih
RE s strežnika DoC:
http://www.ptc.panasonic.eu
Naslov pooblaščenega predstavnika:
Panasonic Marketing Europe GmbH, Panasonic Testing
Centre, Winsbergring 15, 22525 Hamburg, Nemčija
Slovensky
Vyhlásenie o zhode (DoC)
“Panasonic Corporation” týmto vyhlasuje, že tento
výrobok je v súlade so základnými požiadavkami a
ďalšími príslušnými ustanoveniami smernice 2014/53/EÚ.
Zákazníci si môžu stiahnuť kópiu pôvodného DoC na
naše RE výrobky z nášho servera DoC:
http://www.ptc.panasonic.eu
Kontakt na splnomocneného zástupcu:
Panasonic Marketing Europe GmbH, Panasonic Testing
Centre, Winsbergring 15, 22525 Hamburg, Nemecko
Type of wireless
Frequency band
Maximum power
(dBm E.I.R.P.)
Bluetooth
®
2402 – 2480 MHz 4 dBm
2.4 GHz wireless
system
2404 – 2476 MHz 7 dBm
Τύπο ασύρματης
Ζώνη
συχνοτήτων
Μέγιστη ισχύς
(dBm e.i.r.p.)
Bluetooth
®
2402 – 2480 MHz 4 dBm
2.4 GHz wireless
system
2404 – 2476 MHz 7 dBm
Tipo de ligação
sem fios
Banda de
frequência
Potência máxima
(dBm e.i.r.p.)
Bluetooth
®
2402 – 2480 MHz 4 dBm
2.4 GHz wireless
system
2404 – 2476 MHz 7 dBm
Bevielio ryšio
tinklas
Dažnių
diapazonas
Maksimali siuntimo
galia (dBm e.i.r.p.)
Bluetooth
®
2402 – 2480 MHz 4 dBm
2.4 GHz
wireless
system
2404 – 2476 MHz 7 dBm
Vrsta brezžiène
povezave
Frekvenčni pas
Največja moč
(dBm EIRP)
Bluetooth
®
2402 – 2480 MHz 4 dBm
2.4 GHz
wireless system
2404 – 2476 MHz 7 dBm
Typ bezdrôtového
pripojenia
Frekvenčné
pásmo
Maximálny výkon
(dBm e.i.r.p.)
Bluetooth
®
2402 – 2480 MHz 4 dBm
2.4 GHz wireless
system
2404 – 2476 MHz 7 dBm
TQBJ2086_en.fm Page 20 Wednesday, December 27, 2017 2:30 PM
offset printing
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
Pagina se încarcă ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Panasonic SCHTB258EB Manualul proprietarului

SCHTB258EB
Panasonic
Marca
Panasonic
Model
SCHTB258EB
Tip
Manualul proprietarului
Descărcați PDF
raport

în alte limbi

Lucrări conexe

Alte documente