Eizo DX0211-IP Manualul proprietarului

English

Setup Manual

IP Decoding Box

Software Version 5.1

Important

Please read this “Setup Manual”, “Installation Manual”, and

“Instruction Manual” carefully to familiarize yourself with safe and

effective usage.

Please retain this manual for future reference.

• For the latest product information including the “Setup Manual”,

refer to our web site :

www.eizoglobal.com

2

SAFETY SYMBOLS

This manual and this product use the safety symbols below. They denote critical information.

Please read them carefully.

WARNING

Failure to abide by the information in a

WARNING may result in serious injury

and can be life threatening.

CAUTION

Failure to abide by the information in a

CAUTION may result in moderate injury

and/or property or product damage.

Indicates a warning or caution. For example, indicates an “electrical shock” hazard.

Indicates a prohibited action. For example, means “Do not disassemble”.

Indicates a mandatory action. For example, means “Ground the unit”.

Related Manuals

Setup Manual

(this manual)

Describes precautions and procedures for connecting network

cameras and for displaying camera images on the monitor. (Installation

and initialization guidance)

Installation Manual

*1

Describes network camera registration, function settings, and system

settings. (Detail settings guidance)

Instruction Manual

*1

Describes operation of live image screen menus. (Operation guidance)

*1 The Instruction Manual and Installation Manual for the latest software version used can be obtained

from our web site. Select “Manuals” from “Support”, enter “DX0211-IP” in the “Enter model name”

box, and click “Search”.

www.eizoglobal.com

Installation of Adobe

®

Acrobat

®

Reader

®

is required.

This product has been adjusted specically for use in the region to which it was originally

shipped. If operated outside this region, the product may not perform as stated in the

specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any

form or by any means, electronic, mechanical, or otherwise, without the prior written permission

of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information

condential unless prior arrangements are made pursuant to EIZO Corporation’s receipt of said

information. Although every effort has been made to ensure that this manual provides up-to-

date information, please note that EIZO monitor specications are subject to change without

notice.

English

3

PRECAUTIONS

IMPORTANT

To ensure personal safety and proper maintenance, please read carefully this section and the

caution statements on the monitor.

Location of the Caution Statements

4

PRECAUTIONS

WARNING

If the unit begins to emit smoke, smells like something is burning, or makes strange

noises, disconnect all power connections immediately and contact your local EIZO

representative for advice.

Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.

Do not disassemble or modify the product.

Touching the internal components may result in electrical shock or burn, as

this product contains internal components that may have high voltage or high

temperature. Also, modifying the product may result in re or electrical shock.

Refer all servicing to qualied service personnel.

Do not attempt to service this product yourself as opening or removing covers may result in

re, electric shock, or equipment damage.

Keep small objects or liquids away from the unit.

Small objects accidentally falling through the ventilation slots into the cabinet or

spillage into the cabinet may result in re, electric shock, or equipment damage. If

an object or liquid falls/ spills into the cabinet, unplug the unit immediately. Have the

unit checked by a qualied service engineer before using it again

Place the unit at the strong and stable place.

A unit placed on an inadequate surface may fall and result in injury or equipment damage. If

the unit falls, disconnect the power immediately and ask your local EIZO representative for

advice. Do not continue using a damaged unit. Using a damaged unit may result in re or

electric shock.

Use the unit in an appropriate location.

Not doing so may result in re, electric shock, or equipment damage.

• Do not place outdoors.

• Do not place in a transportation system (ship, aircraft, train, automobile, etc.)

where it may be affected by strong vibration or shock.

• Do not place in a dusty or humid environment.

• Do not place in environments with corrosive gases (such as sulfur dioxide,

hydrogen sulde, nitrogen dioxide, chlorine, ammonia, and ozone).

• Do not place in environments with dust, components that accelerate corrosion in

the atmosphere (such as sodium chloride and sulfur), conductive metals, and so

on.

• Do not place in a location where water is splashed on the screen (bathroom,

kitchen, etc.).

• Do not place in a location where the steam comes directly on the screen.

• Do not place near heat generating devices or a humidier.

• Do not place in a location where the product is subject to direct sunlight.

• Do not place in an inammable gas environment.

To avoid danger of suffocation, keep the plastic packing bags away from babies and

children.

English

5

PRECAUTIONS

WARNING

When using an AC adapter, use the AC adapter (DVAC-01) specied by our company.

Using other AC adapters may result in re or electrical shock.

The DVAC-01 is not provided with a power cord. Prepare a power cord that complies with the

standards of the country or region where this product is used.

• Europe: Ratings: 250 VAC, 10 A; Cord type: H05VV-F, GTCE-3, 0.75 mm

2

• USA: Ratings: 125 VAC, 10 A; Cord type: SVT, 3/18AWG (0.75 mm

2

)

The AC adapter must be connected to a grounded main outlet.

Failure to do so may result in re or electric shock.

Use the correct voltage.

• The unit is designed for use with a specic voltage only. Connection to another voltage than

specied in this User’s Manual may cause re, electric shock, or equipment damage.

• Do not overload your power circuit, as this may result in re or electric shock.

Handle the power cord with care.

• Do not place the cord underneath the unit or other heavy objects.

• Do not pull on or tie the cord.

If the power cord becomes damaged, stop using it. Use of a damaged cord may

result in re or electric shock.

When disconnecting the power cord, pull the plug.

Pulling the cord section may damage it (exposure of the

core wire, breaking, etc.) and may result in re or electrical

shock.

Never touch the plug and power cord if it begins to thunder.

Touching them may result in electric shock.

6

PRECAUTIONS

CAUTION

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit. Moving the unit with the cord

attached is dangerous. It may result in injury.

Do not put any object on the product.

• Do not put any object on or around the product.

• Do not place the product in a poorly-ventilated or narrow place.

• Do not use the product laid down on its side or upside down.

The temperature inside the product may rise and may result in re, electrical shock,

or equipment damage.

Do not touch the plug or AC adapter with wet hands.

Doing so may result in electrical shock.

Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a problem.

Be careful with the AC adapter because it becomes hot when used.

• Do not put any objects on the AC adapter or cover the adapter. Also, do not put

the AC adapter on carpet or bedding where heat tends to accumulate. Keep the

AC adapter away from heat sources such as portable heaters or direct sunlight.

Failure to do so may result in re.

• Do not touch the product with bare hands. Doing so may result in burns.

• When moving the product, be sure to turn off the power switch, unplug the power

plug from the outlet, and sufciently cool down the product before moving.

Do not use the AC adapter hung dangling in the air.

Using the AC adapter hung dangling in the air may result in re or electrical shock.

Periodically clean the area around the plug.

Dust, water, or oil on the plug may result in re.

When cleaning the product, shut down the power input.

Cleaning the unit while it is plugged into a power outlet may result in electric shock.

English

7

Notice for this product

About the Usage of This Product

This product is a device that outputs video images from network cameras to a monitor

connected using HDMI cable.

When using the product in an application where extremely high reliability and safety are

required as mentioned below, take measures to secure safety before using it.

• Transportation equipment (vessels, aircraft, trains, automobiles, etc.)

• Various safety devices such as disaster prevention devices and crime prevention

devices

• Equipment and instruments that are directly associated with human life (medical

instruments such as life support systems or the equipment used in the operating room)

• Nuclear control devices (nuclear control systems, safety protection systems used at

nuclear power facilities, etc.)

• Main communication equipment (operation control systems for transportation systems,

air trafc control systems, etc.)

This product may not be covered by warranty for uses other than those described in this

manual.

The specications noted in this manual are only applicable when the following are used:

• Power cords provided with the product

• Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

About the Installation

When the monitor is cold and brought into a room or the room temperature goes up quickly,

dew condensation may occur on the interior and exterior surfaces of the monitor. In that case,

do not turn the monitor on. Instead wait until the dew condensation disappears, otherwise it

may cause some damage to the monitor.

Install this product on a stable surface such as a desk with its at surface as the bottom in a

horizontal orientation.

This product can be mounted on the monitor by using a special mounting bracket (separately

sold option). The mounting bracket can be purchased from our web site.

www.eizoglobal.com

With respect to the installation orientation when the mounting bracket is used, refer to the

instruction sheet of the mounting bracket.

If this product is placed on a lacquer-nished desk, the color may adhere to the bottom of the

product due to the composition of the rubber.

8

Notice for this product

Disclaimer

Our company shall bear no responsibility for any damage (including lost prots, etc.) incurred

directly or indirectly by using this product or by malfunctions, etc. (including, but not limited to,

those caused by the following).

1. Misuse or carelessness by the customer

2. Disassembly, repair, or modication by the customer

3. Inability to display images due to some reason or cause including malfunction or failure

of this product

4. Use of the product in combination with a third-party device

5. Occurrence of an event such as infringement of privacy due to some cause with

respect to the images monitored by the customer

6. Loss of registered or recorded information due to some cause

While this product displays camera surveillance images, the use of this product alone does

not directly prevent crime.

Network Security Request

Because this product is used by connecting to networks, the following risks apply

1. Leakage of information through this product.

2. Unauthorized operation of this product by a malicious third party.

3. Interference or suspension of the use of this product by a malicious third party.

In order to prevent the above described damage, it is the user’s responsibility to implement

adequate network security measures including the measures described below.

• Use this product with a safety-ensured network by using a rewall or other network

security systems.

• Change the administrator password periodically.

English

9

CONTENTS

PRECAUTIONS ..............................................3

IMPORTANT ..................................................... 3

Notice for this product ................................. 7

About the Usage of This Product .................. 7

About the Installation ..................................... 7

Disclaimer ........................................................ 8

Network Security Request ............................. 8

CONTENTS ..................................................... 9

Package Contents ....................................... 10

Controls and Functions .............................. 11

Setup ............................................................ 12

Connect the Network Camera(s) ..................13

●

Connecting the Network Cameras ........13

●

Connecting the Monitor .........................14

●

Connecting Operating Devices .............15

●

Connecting an AC Adapter

(Separately Sold Option) .......................15

Turning On the Power ....................................16

●

Live Image Screen ................................17

Perform Initialization .....................................18

●

Logging In ..............................................18

●

Setting the Date and Time ................... 20

●

Performing Network Settings ............... 21

●

Registering Cameras ........................... 23

●

Setting the Language ........................... 26

Reference ..................................................... 27

Conrming the Software Version ................ 27

Specications ................................................ 28

●

Compatible Resolution ......................... 29

●

Outline Dimensions .............................. 30

Troubleshooting .......................................... 31

No Picture ........................................................31

Imaging Problems ......................................... 32

Setting Problems ........................................... 33

Other Problems ............................................. 34

Appendix ......................................................35

Warning for Radio Interference ................... 35

LIMITED WARRANTY .................................... 37

Recycling Information /

Informationen zum Thema Recycling /

Informations sur le recyclage /

Сведения по утилизации ............................ i

10

Package Contents

Check that all of the following parts are included. If any of these are missing or damaged, contact

your dealer or local EIZO representative.

• DX0211-IP (this product) • Setup Manual (this manual)

• HH050HS

HDMI cable (HDMI - HDMI)

• Contact Addresses

Note

• It is recommended that the packing box and materials be kept for future usage such as for moving or

transporting the product.

English

11

Controls and Functions

1 2 3 4 5

6 7 8 9 10

Front

Rear

Names Details

1. Connection terminal

for the remote control

light reception unit

Cannot be used.

2. Reset button Resets the settings.

3.

button Turns the power on or off.

4. Power indicator

Indicates the product’s operating status.

Blue Normal operating mode

Flashing blue Starting up

Red Power off

OFF Power not connected

5. Remote control light

reception section

Cannot be used.

6. DC input Connects the AC adapter.

7. LAN port

Connects the network cable. Inputs power when connected to a

network hub that supports PoE+.

a b

a) Status LED

Orange

Power is being supplied

through the PoE+.

Flashing

orange

Transmitting data

OFF

Power is being supplied

through the AC adapter.

b) Link LED

Green

Network connection

established

OFF

Network connection not

established

8. USB downstream port Connects the USB mouse, USB hub, or USB keyboard.

9. HDMI connector

Connects to monitors that support HDMI.

Connect to the HDMI 1 port. The HDMI 2 port cannot be used.

10. Audio output Cannot be used.

12

Setup

Set up the system until network camera images are displayed on the monitor.

This product can also be operated or set using a USB mouse or USB keyboard.

For details, refer to the pages shown below.

Setup Flow

Connect the Network Camera(s) (page 13)

Turn On the Power (page 16)

Perform Initialization (page 18)

Set the following items.

• Date and time

• Network information

• Registration of network cameras

• Camera image display positions

This completes the setup procedure.

Attention

• The language used in menus and messages displayed when the system is started differs

according to the sales region.

Note

• Initial settings can be made from the Web browser of a computer connected to the same

network. For details on setting from a Web browser, refer to the "Installation Manual".

English

13

Setup

Connect the Network Camera(s)

●

Connecting the Network Cameras

Connect the network cameras to this product according to the following procedure.

Connection example

Network camera

Network hub

*1

DX0211- IP

Network camera

Network cable

*1 Use a network hub that supports PoE+. If the hub does not support the PoE+ standard,

network cameras and DX0211-IP must be individually connected to the power supply.

1.

Connect the network cable to this product and to the LAN port of the

network hub.

LAN

Network cable

Network hub

*1

*1 Use a network hub that supports 1000Base-T and PoE+.

Attention

• Use a straight cable of category 5e or above for the network cable.

• Congure the network in consideration of the communication performances of the various

devices.

• Adjust the network camera settings so that the video image resolution reaches the level of

resolution that can be input to this product. For the resolution that can be input, refer to “Input

resolution” (page 29).

14

Setup

2.

Connect the network cameras to the network hub.

For connecting the network cameras and the network hub, refer to the network camera

User’s Manual.

Note

• A maximum of 16 network cameras can be connected.

●

Connecting the Monitor

Connect a monitor that supports HDMI to this product. Connect a monitor that can display

at the resolution specied in “Output resolution” (page 30).

Attention

• This product has two HDMI terminals. (HDMI 1 and HDMI 2): The HDMI 2 port cannot be used.

Be sure to connect to the HDMI 1 port.

Connection example

HDMI cable HH050HS

(Included)

English

15

Setup

●

Connecting Operating Devices

Connect a USB mouse to operate the product.

1.

Connect a USB mouse to the USB downstream port.

Note

• When connected to a device that has a USB hub function, both the USB mouse and USB

keyboard can be used.

●

Connecting an AC Adapter (Separately Sold Option)

Note

• This product supports the PoE+ function. If the connected network hub supports the PoE+

function, power is input from the LAN port. Therefore, there is no need to connect the AC

adapter.

• When connected to both the AC adapter and a network hub that supports PoE+, power is

supplied from the AC adapter.

1.

Connect the power cord to the AC adapter.

2.

Connect the output terminal of the AC adapter to the DC input

terminal of this product.

3.

Connect the power plug to the power outlet.

Attention

• Insert the power cord all the way into the power connector.

• Do not bundle cables when wiring.

16

Setup

Turning On the Power

1.

Press on the front of the product.

The power indicator lights up blue and the live image screen is displayed. For information

on how to operate the live image screen, refer to the “Instruction Manual”.

Image display area

Menu

Attention

• It takes approximately 30 seconds for the live image screen to be displayed after the power is

turned on. Do not turn off the power during startup.

• When no network camera is registered, a “Not Registered” message is displayed in the video

image display area.

Note

• By default, when power is input, the power indicator automatically ashes blue and the startup

process takes place.

• Press

also when turning off the power.

English

17

Setup

●

Live Image Screen

Menu Operations

Each menu can be operated using a USB mouse or USB keyboard.

If the menu is not displayed, press any key on the USB keyboard or click on the screen

using the USB mouse to display the menu.

System setup menu

Display mode menu

It is possible to change the state of the video image display area. When using a keyboard,

press a shortcut key.

Display mode menu Shortcut key Details

F Displays or hides the menu of the live image screen.

L

Changes the display layout of the video images.

When using a USB keyboard, each time the shortcut

key is pressed, the layout changes as follows: 1

Screen → 3 Screens → 4 Screens → 9 Screens →

16 Screens → 8 Screens → Custom Screen → 1

Screen.

S

Turns the sequence function (function that switches

the pages to be displayed on the video image

display area at regular intervals) on or off.

PageDown /

PageUp

Switches the pages to be displayed on the video

image display area.

18

Setup

System setup menu

The system setup menu is used to log into the user account and to congure the system.

For information on how to log in, refer to “Logging In” (page 18). For details on system

settings, refer to the “Installation Manual”.

Perform Initialization

This section describes settings to display network camera images on the monitor.

Note

• Initial settings can be made from the Web browser of a computer connected to the same network.

For details on setting from a Web browser, refer to the "Installation Manual".

●

Logging In

1.

Select (Login).

The login screen is displayed.

Login screen

Login

Note

• Items being selected are highlighted in green.

2.

Enter a “Username” and a “Password”.

1. Enter the following username and password.

Username: “admin”

Password: “admin”

Note

• The above username and password are the default settings.

English

19

Setup

Entering characters

• When entering using a USB mouse

Clicking an item that requires characters to be input, such as a text box, will display a software

keyboard. When the focus is moved out of the software keyboard, the software keyboard is

hidden.

• When entering using a USB keyboard

Entered characters are displayed in the text box. Move from item to item using the Tab key.

3.

Select “Login”.

The display returns to the live image screen where you can select (Settings).

Settings

20

Setup

●

Setting the Date and Time

1.

Select (Settings).

The setting screen is displayed.

2.

Select “System” and then “Date and Time”.

The “Date and Time” screen is displayed.

3.

Set the current date and time.

Date/Time Display Settings

Item Description Setting range

Date Format Set the date format and time format. yyyy/mm/dd, Mmm/dd/yyyy, dd/

Mmm/yyyy, mm/dd/yyyy,dd/mm/

yyyy

Time Format 24h / 12h

Time Zone Setting

Item Description Setting range

Time Zone Set the time zone. Region / city

Clock Settings

Item Description Setting range

Procedure

*1

Select the time setting procedure. Manual / Synchronize with PC

Date and Time Set the current time. 2010/1/1 0:00 to 2035/12/31

23:55

*1 This can be set only when displayed on the web browser.

Pagina se încarcă ...

Eizo DX0211-IP Manualul proprietarului

Eizo DX0211-IP Manualul proprietarului

în alte limbi

Lucrări conexe

Alte documente