Eizo DX0211-IP Manualul proprietarului

English

Setup Manual

IP Decoding Box

Software Version 5.3

Important

Please read this “Setup Manual”, “Installation Manual”, and

“Instruction Manual” carefully to familiarize yourself with safe and

eective usage.

Please retain this manual for future reference.

• For the latest product information including the “Setup Manual”,

refer to our web site :

www.eizoglobal.com

2

SAFETY SYMBOLS

This manual and this product use the safety symbols below. They denote critical information.

Please read them carefully.

WARNING

Failure to abide by the information in a

WARNING may result in serious injury

and can be life threatening.

CAUTION

Failure to abide by the information in a

CAUTION may result in moderate injury

and/or property or product damage.

Indicates a warning or caution. For example, indicates an “electrical shock” hazard.

Indicates a prohibited action. For example, means “Do not disassemble”.

Related Manuals

Setup Manual

(this manual)

Describes precautions and procedures for connecting network

cameras and for displaying camera images on the monitor. (Installation

and initialization guidance)

Installation Manual

*1

Describes network camera registration, function settings, and system

settings. (Detail settings guidance)

Instruction Manual

*1

Describes operation of live image screen menus. (Operation guidance)

*1 The Instruction Manual and Installation Manual for the latest software version used can be obtained

from our web site. Select “Manuals” from “Support”, enter “DX0211-IP” in the “Enter model name”

box, and click “Search”.

www.eizoglobal.com

Installation of Adobe

®

Acrobat

®

Reader

®

is required.

This product has been adjusted specically for use in the region to which it was originally

shipped. If operated outside this region, the product may not perform as stated in the

specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any

form or by any means, electronic, mechanical, or otherwise, without the prior written permission

of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information

condential unless prior arrangements are made pursuant to EIZO Corporation’s receipt of said

information. Although every eort has been made to ensure that this manual provides up-to-

date information, please note that EIZO product specications are subject to change without

notice.

English

3

PRECAUTIONS

IMPORTANT

To ensure personal safety and proper maintenance, please read carefully this section and the

caution statements on the product.

Location of the Caution Statements

4

PRECAUTIONS

WARNING

If the unit begins to emit smoke, smells like something is burning, or makes strange

noises, disconnect all power connections immediately and contact your local EIZO

representative for advice.

Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.

Do not disassemble or modify the product.

Touching the internal components may result in electrical shock or burn, as

this product contains internal components that may have high voltage or high

temperature. Also, modifying the product may result in re or electrical shock.

Refer all servicing to qualied service personnel.

Do not attempt to service this product yourself as opening or removing covers may result in

re, electric shock, or equipment damage.

Keep small objects or liquids away from the unit.

Small objects accidentally falling through the ventilation slots into the cabinet or

spillage into the cabinet may result in re, electric shock, or equipment damage. If

an object or liquid falls/ spills into the cabinet, unplug the unit immediately. Have the

unit checked by a qualied service engineer before using it again

Place the unit at the strong and stable place.

A unit placed on an inadequate surface may fall and result in injury or equipment damage. If

the unit falls, disconnect the power immediately and ask your local EIZO representative for

advice. Do not continue using a damaged unit. Using a damaged unit may result in re or

electric shock.

Use the unit in an appropriate location.

Not doing so may result in re, electric shock, or equipment damage.

• Do not place outdoors.

• Do not place in a transportation system (ship, aircraft, train, automobile, etc.)

where it may be aected by strong vibration or shock.

• Do not place in a dusty or humid environment.

• Do not place in environments with corrosive gases (such as sulfur dioxide,

hydrogen sulde, nitrogen dioxide, chlorine, ammonia, and ozone).

• Do not place in environments with dust, components that accelerate corrosion in

the atmosphere (such as sodium chloride and sulfur), conductive metals, and so

on.

• Do not place in a location where water is splashed on the product (bathroom,

kitchen, etc.).

• Do not place in a location where the steam comes directly on the product.

• Do not place near heat generating devices or a humidier.

• Do not place in a location where the product is subject to direct sunlight.

• Do not place in an inammable gas environment.

To avoid danger of suocation, keep the plastic packing bags away from babies and

children.

English

5

PRECAUTIONS

WARNING

When using an AC adapter, use the AC adapter (DVAC-01) specied by our company.

Using other AC adapters may result in re or electrical shock.

The DVAC-01 is not provided with a power cord. Prepare a power cord that complies with the

standards of the country or region where this product is used.

• Europe: Ratings: 250 VAC, 10 A; Cord type: H05VV-F, GTCE-3, 0.75 mm

2

• USA: Ratings: 125 VAC, 10 A; Cord type: SVT, 3/18AWG (0.75 mm

2

)

The AC adapter must be connected to a grounded main outlet.

Failure to do so may result in re or electric shock.

Use the correct voltage.

• The unit is designed for use with a specic voltage only. Connection to another voltage than

specied in this User’s Manual may cause re, electric shock, or equipment damage.

• Do not overload your power circuit, as this may result in re or electric shock.

Handle the power cord with care.

• Do not place the cord underneath the unit or other heavy objects.

• Do not pull on or tie the cord.

If the power cord becomes damaged, stop using it. Use of a damaged cord may

result in re or electric shock.

When disconnecting the power cord, pull the plug.

Pulling the cord section may damage it (exposure of the

core wire, breaking, etc.) and may result in re or electrical

shock.

Never touch the plug and power cord if it begins to thunder.

Touching them may result in electric shock.

6

PRECAUTIONS

CAUTION

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit. Moving the unit with the cord

attached is dangerous. It may result in injury.

Do not put any object on the product.

• Do not put any object on or around the product.

• Do not place the product in a poorly-ventilated or narrow place.

• Do not use the product laid down on its side or upside down.

The temperature inside the product may rise and may result in re, electrical shock,

or equipment damage.

Do not touch the plug or AC adapter with wet hands.

Doing so may result in electrical shock.

Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a problem.

Be careful with the AC adapter because it becomes hot when used.

• Do not put any objects on the AC adapter or cover the adapter. Also, do not put

the AC adapter on carpet or bedding where heat tends to accumulate. Keep the

AC adapter away from heat sources such as portable heaters or direct sunlight.

Failure to do so may result in re.

• Do not touch the product with bare hands. Doing so may result in burns.

• When moving the product, be sure to turn o the power switch, unplug the power

plug from the outlet, and suciently cool down the product before moving.

Do not use the AC adapter hung dangling in the air.

Using the AC adapter hung dangling in the air may result in re or electrical shock.

Periodically clean the area around the plug.

Dust, water, or oil on the plug may result in re.

When cleaning the product, shut down the power input.

Cleaning the unit while it is plugged into a power outlet may result in electric shock.

English

7

Notice for this product

About the Usage of This Product

This product is a device that outputs video images from network cameras to a monitor

connected using HDMI cable.

When using the product in an application where extremely high reliability and safety are

required as mentioned below, take measures to secure safety before using it.

• Transportation equipment (vessels, aircraft, trains, automobiles, etc.)

• Various safety devices such as disaster prevention devices and crime prevention

devices

• Equipment and instruments that are directly associated with human life (medical

instruments such as life support systems or the equipment used in the operating room)

• Nuclear control devices (nuclear control systems, safety protection systems used at

nuclear power facilities, etc.)

• Main communication equipment (operation control systems for transportation systems,

air trac control systems, etc.)

This product may not be covered by warranty for uses other than those described in this

manual.

The specications noted in this manual are only applicable when the following are used:

• Power cords provided with the product

• Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

About the Installation

When the product is cold and brought into a room or the room temperature goes up quickly,

dew condensation may occur on the interior and exterior surfaces of the product. In that case,

do not turn the product on. Instead wait until the dew condensation disappears, otherwise it

may cause some damage to the product.

Install this product on a stable surface such as a desk with its at surface as the bottom in a

horizontal orientation.

This product can be mounted on the monitor by using a special mounting bracket (separately

sold option). The mounting bracket can be purchased from our web site.

www.eizoglobal.com

With respect to the installation orientation when the mounting bracket is used, refer to the

instruction sheet of the mounting bracket.

If this product is placed on a lacquer-nished desk, the color may adhere to the bottom of the

product due to the composition of the rubber.

8

Notice for this product

Disclaimer

Our company shall bear no responsibility for any damage (including lost prots, etc.) incurred

directly or indirectly by using this product or by malfunctions, etc. (including, but not limited to,

those caused by the following).

1. Misuse or carelessness by the customer

2. Disassembly, repair, or modication by the customer

3. Inability to display images due to some reason or cause including malfunction or failure

of this product

4. Use of the product in combination with a third-party device

5. Occurrence of an event such as infringement of privacy due to some cause with

respect to the images monitored by the customer

6. Loss of registered or recorded information due to some cause

While this product displays camera surveillance images, the use of this product alone does

not directly prevent crime.

Network Security Request

Because this product is used by connecting to networks, the following risks apply

1. Leakage of information through this product.

2. Unauthorized operation of this product by a malicious third party.

3. Interference or suspension of the use of this product by a malicious third party.

In order to prevent the above described damage, it is the user’s responsibility to implement

adequate network security measures including the measures described below.

• Use this product with a safety-ensured network by using a rewall or other network

security systems.

• Change the administrator password periodically.

9

CONTENTS

English

CONTENTS

PRECAUTIONS ..............................................3

IMPORTANT ..................................................... 3

Notice for this product ................................. 7

About the Usage of This Product .................. 7

About the Installation ..................................... 7

Disclaimer ........................................................ 8

Network Security Request ............................. 8

CONTENTS ..................................................... 9

Package Contents ....................................... 10

Controls and Functions .............................. 10

Setup ............................................................ 12

Connecting the Network Camera(s) .............13

Connecting the Monitor .................................14

Connecting Operating Devices ....................14

●

Connecting a USB device .....................14

●

Connecting an AC Adapter

(Separately Sold Option) .......................15

Turning On the Power ....................................16

●

Live Image Screen ................................17

Perform Initialization .....................................18

●

Log In ....................................................18

●

Setting the Date and Time ................... 21

●

Performing Network Settings ............... 22

●

Registering a Camera Using Auto

Discovery ............................................. 24

●

Registering a Camera Manually ........... 26

●

Setting the Language ........................... 29

Reference ..................................................... 30

Conrming the Software Version ................ 30

Specications .................................................31

●

Compatible resolution .......................... 32

●

Outline Dimensions .............................. 33

Troubleshooting .......................................... 34

The Screen is not Displayed ........................ 34

Imaging Problems ......................................... 35

Setting Problems ........................................... 37

Other Problems ............................................. 38

Appendix ......................................................39

Warning for Radio Interference ................... 39

LIMITED WARRANTY .....................................41

Recycling Information / Informationen zum Thema

Recycling /

Informations sur le recyclage / Сведения по утилизации

...i

Package Contents

Check that all of the following parts are included. If any of these are missing or damaged, contact

your dealer or local EIZO representative.

• DX0211-IP (this product)

• Setup Manual

• HH050HS

HDMI cable (HDMI-HDMI)

• Contact Addresses

• Mounting screws for PCSK-03 / PCSK-03R

Used for mounting PCSK-03 or PCSK-03R adapter for smaller device.

Attention

• No power cord is supplied with this product. Use a power cord that complies with the rating and

standards of the country or region where this product is used.

Note

• It is recommended that the packing box and materials be kept for future usage such as for moving or

transporting the product.

Controls and Functions

1 2 3 4 5

6 7 8 9 10

Front

Rear

10

Package Contents

English

Names Details

1. Connection terminal

for the remote control

light reception unit

Use this terminal to connect the remote control light reception unit

where the remote control light reception section on the main unit

cannot be used. (Terminal for use with models with remote controls.)

2. Reset button

Pressing and holding this button for 10 seconds will initialize the

following information:

• Camera information

• USB lock

• User account setting

3.

button Turns the power on or o.

4. Power indicator

Indicates the product’s operating status.

Blue Normal operating mode

Flashing blue Starting up

Red Power o

OFF Power not connected

5. Remote control light

reception section

Receives signals from the remote control. (A function for use with

models equipped with a remote control)

6. DC input Connects the AC adapter.

7. LAN port

Connects the network cable. Inputs power when connected to a

network hub that supports PoE+.

a b

a) Status LED

Orange

Power is being supplied

through the PoE+.

OFF

Power is being supplied

through the AC adapter.

b) Link LED

Green

Network connection

established

OFF

Network connection not

established

8. USB downstream port Connects a USB mouse, USB keyboard, or joystick.

9. HDMI1 / HDMI2 HDMI output connector. Connects to monitors that support HDMI.

10. Stereo mini jack Audio output terminal. Connects a commercial stereo mini jack cable.

11

Controls and Functions

Setup

Set up the system until network camera images are displayed on the monitor.

This product is operated or set using a USB mouse or USB keyboard.

Setup Flow

Connect the Network Camera(s) (page 13)

Turn On the Power (page 16)

Perform Initialization (page 19)

Set the following items.

• Date and time

• Network information

• Registration of network cameras

• Camera image display positions

This completes the setup procedure.

Attention

• The language used in menus and messages displayed when the system of this product is started

diers according to the sales region.

Note

• Initial settings can be made from the Web browser of a computer connected to the same

network. For details on setting from a Web browser, refer to the “Installation Manual”.

12

Setup

English

Connecting the Network Camera(s)

Connect the network cameras to this product according to the following procedure.

1.

Connect the network camera to this product via the network hub.

1. Connect the network cable (straight cable, Cat 5e or higher) to this product and the

LAN port of the network hub.

LAN

Network cable

Network hub

Attention

• Use a1000Base-T-compatible network hub.

• If the network hub supports PoE+, the product will operate from the network hub power supply.

• Use a straight cable of category 5e or above for the network cable.

• Congure the network in consideration of the communication performances of the various

devices.

• Adjust the network camera settings so that the video image resolution reaches the level of

resolution that can be input to this product. For the resolution that can be input, refer to “Input

resolution” (page 32).

2. Connect the network camera to the network hub.

For connecting the network cameras and the network hub, refer to the network camera

User’s Manual.

Connection example

Network camera

Network hub

*1

Product main unit

Network camera

Network cable

Note

• A maximum of 48 network cameras can be registered.

13

Setup

Connecting the Monitor

Connect a monitor that supports HDMI to this product. Connect the monitor that can display

at a resolution listed in “Output resolution” (page 33).

Attention

• This product has two HDMI terminals. (HDMI 1 and HDMI 2)

• Connect the monitor to HDMI 1 if “Multi-Monitor” under “Other” in “System” is set to “Single”. (The

“Multi-Monitor” default value is set to “Extended”.)

Connection example

HDMI cable HH050HS

(Accessory)

14

Setup

English

Connecting Operating Devices

●

Connecting a USB device

Connect a USB mouse, USB keyboard, or joystick to the USB downstream port.

Note

• Connecting to a device with USB hub function enables operation with multiple USB devices.

• Compatible joysticks are shown below.

- A XIS T8311

●

Connecting an AC Adapter (Separately Sold Option)

Note

• This product supports the PoE+ function. If the connected network hub supports the PoE+

function, power is input from the LAN port. Therefore, there is no need to connect the AC

adapter.

• When connected to both the AC adapter and a network hub that supports PoE+, power is

supplied from the AC adapter.

1.

Connect the power cord to the AC adapter.

2.

Connect the output terminal of the AC adapter to the DC input

terminal of this product.

3.

Connect the power plug to the power outlet.

Attention

• Insert the power cord all the way into the power connector.

• Do not bundle cables when wiring.

15

Setup

Turning On the Power

1.

Press on the front of the product.

The power indicator lights up blue and the live image screen is displayed.

Network camera image display area Message display area

Menu

Attention

• It takes approximately 1 minute for the live image screen to be displayed after the power is turned

on. Do not turn o the power during startup.

• When no network camera is registered, a “Not Registered” message is displayed in the network

camera image display area.

Note

• By default, when power is input, the power indicator automatically ashes blue and the startup

process takes place.

• To turn o the power, press

on the front of this product.

16

Setup

English

●

Live Image Screen

Describes basic operation of live image screen. For details, refer to the “Instruction

Manual”.

Menu Operations

The various menus can be operated using a USB mouse, USB keyboard, or a joystick.

If a menu is not displayed, click the screen with the USB mouse to display a menu.

System setup menu / Camera control menu

Display mode menu

17

Setup

Display mode menu

Camera images displayed on the live screen can be operated. With the Enterprise edition,

the icons displayed can be changed from the setting screen. For details, see the

“Installation Manual”.

Display mode menu

(Default settings)

Shortcut

key

Details

F

Displays or hides the menu of the live image

screen.

L Changes the live image screen layout.

S

Turns the sequence of the camera image (mode

that switches the display page at regular intervals)

on or o.

PageDown /

PageUp

Changes the camera image page to display on the

live image screen.

18

Setup

English

Perform Initialization

This section describes settings to display network camera images on the monitor.

Note

• Initial settings can be made from the Web browser of a computer connected to the same network.

For details on setting from a Web browser, refer to the “Installation Manual”.

●

Log In

1.

Select (Login).

The login screen is displayed.

Login screen

Login

2.

Enter “Username” and “Password”.

Enter the user name and password shown below and then press .

Username: “admin”

Password: “admin”

Note

• The above user name and password are the default settings.

• When the “Account Type” is set to “LDAP”, you can temporarily change the account type when

logging in by checking “Allow choosing of account type on the login dialog.” under “LDAP” in

advance.

19

Setup

Entering characters

• When entering using a USB mouse

Clicking an item that requires characters to be input, such as a text box, will display a software

keyboard. When the focus is moved out of the software keyboard, the software keyboard is

hidden.

• When entering using a USB keyboard

Entered characters are displayed in the text box.

3.

Select “Login”.

The display returns to the live image screen where you can select (Settings).

Settings

20

Setup

Pagina se încarcă ...

Eizo DX0211-IP Manualul proprietarului

Eizo DX0211-IP Manualul proprietarului

în alte limbi

Lucrări conexe

Alte documente