7
Tip
• If the desired humidity level is reached,
you can select a lower fan speed.
However, if the desired humidity level is
not reached, you can select a higher fan
speed to humidify the air more quickly.
Sleep mode
In sleep mode, the humidier operates
quietly with dimmed light for your
undisturbed sleep.
1 Press the speed button once or
more times to select sleep mode
(g. i). In sleep mode, only the
speed light is on.
2 To change to another fan speed,
simply press the speed button
again.
Note
• Sleep mode only works at speed .
• In sleep mode, the red indicator does
not blink, but remains on when the
water level gets low.
• In sleep mode, you can only set the
timer; the humidity level cannot be set,
and the humidity light is o.
Set the timer
With the timer function, you can let the
humidier operate for a set number of
hours. When the set time has elapsed,
the humidier automatically switches
o.
1 Press the timer button once or
more times to choose the number
of hours you want the humidier to
operate (g. j).
» The corresponding timer light
(1H, 4H or 8H) goes on.
Change the fan speed
Auto
The auto mode uses the digital sensor
to constantly monitor the air humidity. It
turns your humidier on and o when-
ever needed to ensure the humidity level
is constantly at the right level. The de-
fault humidity level of the auto mode is
set at 50RH%, but you can change it to
the humidity level you need under the
auto mode. Next time when you switch
on the humidier, it will remember your
last set humidity level, unless you have
removed the plug from the wall socket.
In this case the default humidity level is
set at 50RH% again.
1 Press the speed button to select
the auto mode (g. g).
» The AUTO speed light goes on.
Tip
• If the desired humidity level is reached,
the humidier changes to a lower fan
speed automatically.
• In AUTO mode, the fan speed changes
between and .
Manual
You can manually select the desired fan
speed.
1 Press the speed button once or
more times to select the desired fan
speed (AUTO, , or ) (g. h).
» The selected fan speed light
goes on.