Philips MG5730/15 Manual de utilizare

MG5720

MG5730

MG5735

MG5740

MG5730

MG5735

MG5740

3-7MM

1MM

2MM

MG5730

MG5735

MG5740

3MM 5MM

12MM

16MM

9MM

1

2

17

4 5 6

7 8 9

10 11 12

13 14

3

18

16

15

empty page before TOC

English 6

Čeština 21

Eesti 36

Hrvatski 51

Latviešu 66

Lietuviškai 82

Magyar 97

Polski 114

Română 131

Shqip 148

Slovenščina 163

Slovensky 178

Srpski 194

Български 208

Македонски 226

Русский 243

Українська 260

Қазақша

276

English

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

General description (Fig. 1)

1 Full-size hair trimmer

2 On/off slide

3 Socket for small plug

4 Precision trimmer

5 Precision shaver (MG5740, MG5735, MG5730

only)

6 Nose trimmer

7 Hair comb 3/8in. (9mm)

8 Hair comb 15/32in. (12mm)

9 Hair comb 21/32in. (16mm)

10 Stubble comb 3/64in. (1mm)

11 Stubble comb 5/64in. (2mm)

12 Adjustable comb (3-7mm)

13 Body comb 1/8in. (3mm) (MG5740, MG5735,

MG5730 only)

14 Body comb 3/16in. (5mm) (MG5740 only)

15 Supply unit

16 Small plug

17 Cleaning brush

18 Pouch

Note: The accessories supplied may vary for

different products. The box shows the accessories

that have been supplied with your appliance.

Important safety information

Read this important information carefully before

you use the appliance and its accessories and save

it for future reference. The accessories supplied

may vary for different products.

6

English

Danger

- Keep the supply unit dry.

Warning

- To charge the battery, only use the

detachable supply unit (A00390) provided

with the appliance.

- The supply unit contains a transformer. Do

not cut off the supply unit to replace it with

another plug, as this causes a hazardous

situation.

- This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning use of

the appliance in a safe way and understand

the hazards involved. Children shall not play

with the appliance. Cleaning and user

maintenance shall not be made by children

without supervision.

7

English

- Always unplug the appliance before you

clean it under the tap.

- Always check the appliance before you use

it. Do not use the appliance if it is damaged,

as this may cause injury. Always replace a

damaged part with one of the original type.

- Do not open the appliance to replace the

rechargeable battery.

Caution

- Never immerse the charging

stand in water and do not rinse

it under the tap.

- Never immerse the appliance in

water. Do not use the appliance

in the bath or shower.

- Never use water hotter than

60°C to rinse the appliance.

- Only use this appliance for its

intended purpose as shown in

the user manual.

- For hygienic reasons, the

appliance should only be used

by one person.

8

English

- Do not use the supply unit in or

near wall sockets that contain

an electric air freshener to

prevent irreparable damage to

the supply unit.

- Never use compressed air,

scouring pads, abrasive

cleaning agents or aggressive

liquids such as petrol or

acetone to clean the appliance.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

General

- This appliance can be safely cleaned under the

tap.

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

- Maximum noise level: Lc = 69dB(A)

Charging

Charging with the supply unit

When the appliance has charged for 16 hours, it

has a cordless operating time of up to 80 minutes.

1 Make sure the appliance is switched off.

9

English

2

1

2 Insert the small plug into the appliance and put

the supply unit in the wall socket.

3 After charging, remove the supply unit from the

wall outlet and pull the small plug out of the

appliance.

Using the appliance

Note: This appliance can only be used without

cord.

Note: Switch off and clean the appliance after each

use.

Detaching and attaching cutting elements

1 To detach a cutting element, push upwards

against the teeth of the cutting element and

take it off the handle.

1

2

2 To attach a cutting element, insert the lug of the

cutting element into the guiding slot at the front

and push the back of the cutting element onto

the appliance ('click').

Detaching the precision shaver and nose

trimmer

1 Place your finger on the arrow at the back of

the attachment and push it off the handle in the

direction of the arrow.

10

English

Attaching and detaching combs

1

2

1 To attach any type of guard onto a cutting

element, slide the front part of the guard onto

the teeth of the cutting element. Then push

down the center of the guard with your fingers

or the palm of your hand ('click').

2 To detach any type of comb from the cutting

element, carefully pull its back part off the

appliance and then slide it off the cutting

element.

Note: When trimming for the first time, start by

using the comb with the maximum trimming

length setting to familiarize yourself with the

appliance.

Switching the appliance on and off

- To switch on the appliance, push the on/off

slide upwards.

- To switch off the appliance, push the on/off

slide downwards.

Attachments for use on beard

Full-size hair trimmer

Use the full-size hair trimmer without a comb to

trim hair close to the skin (to a length of 1/32in

(0.5mm) or to create clean lines around your

beard, neck and sideburns.

1 To trim hair close to the skin, place the flat side

of the cutting element against your skin and

make strokes against the direction of hair

growth.

11

English

2 For contouring, hold the cutting element

perpendicular to the skin and move it upwards

or downwards with gentle pressure.

Beard combs

Attach a beard comb to the full-size hair trimmer

to trim your beard and moustache evenly. The

appliance comes with 5 beard combs. The hair

length settings are indicated on the combs. The

settings correspond to the remaining hair length

after trimming.

Comb inch mm

Stubble comb 3/64in. 1mm

Stubble comb 5/64in. 2mm

Adjustable beard

comb

1/8in.- 9/32in. 3mm-7mm

1 Attach the comb to the full-size hair trimmer.

= mm

2 Adjustable comb: Push the length selector to

the left or right to select the desired hair length

setting.

3 To trim the most effective way, move the comb

against the direction of hair growth. Make sure

the surface of the comb always stays in contact

with the skin.

Attachments for use on body

- Use the green body combs to trim body hair.

- When you trim for the first time, use the

5mm/3/16in. body comb to familiarize yourself

with the appliance.

12

English

- Make sure hair is clean and dry as wet hair

tends to stick to the body.

- When trimming sensitive areas, always use a

body comb.

- Since all hairs do not grow in the same

direction, you may want to try different

trimming positions (i.e. upwards, downwards, or

across). Practice is best for optimum results.

- Always make smooth and gentle movements

and be sure the surface of the comb always

stays in contact with your skin.

- When too many hairs have accumulated on the

appliance, blow the hairs out before use, for

best trimming results.

Body combs

Attach a body comb to the full-size hair trimmer to

trim hairs below the neckline. The appliance comes

with 2 body combs. The hair length settings are

indicated on the combs. The settings correspond

to the remaining hair length after trimming.

Comb inch mm

Body comb (green) 1/8in. 3mm

Body comb (green) 3/16in. 5mm

1 Attach a body comb to the full-size hair

trimmer.

2 To trim in the most effective way, stretch the

skin with your free hand and move the comb

against the direction of hair growth. Make sure

the surface of the comb always stays in contact

with the skin.

13

English

Attachments for use on head

Full-size hair trimmer

Use the full-size hair trimmer without a comb to

clip the hair on your head very close to the skin

(1/32in (0.5mm) or to contour the neckline and

area around the ears.

1 To contour the hairline around the ears, comb

the hair ends over the ears.

2 Tilt the appliance in such a way that only one

edge of the cutter blades touches the hair ends

when you shape the contours around the ears.

3 To contour the nape of the neck or sideburns,

turn the appliance and make downward

strokes.

4 Move the appliance slowly and smoothly

following the natural hairline.

Hair combs

Attach a hair comb to the full size hair trimmer to

evenly trim the hairs on your head. The appliance

comes with 3 hair combs. The hair length settings

are indicated on the combs. The settings

correspond to the remaining hair length after

trimming.

Comb inch mm

Hair comb 3/8in. 9mm

Hair comb 15/32in. 12mm

Hair comb 21/32in. 16mm

1 Attach a comb to the full size hair trimmer.

14

English

2 Move the trimmer slowly over the crown from

different directions to achieve an even result.

Make sure the surface of the comb always stays

in contact with the skin.

-

Always move the trimmer against the

direction of hair growth. Press lightly.

-

Make overlapping passes over the head to

ensure that all hair that should be cut has

been cut.

Precision attachments for use on face

Precision trimmer

Use the precision trimmer to create fine lines and

contours around your facial style, close to the skin

(to a length of 1/32in./0.5mm).

1 Hold the precision trimming head perpendicular

to the skin and move the trimming head

upwards or downwards with gentle pressure.

Nose trimmer

Use the nose trimmer to trim your nose hair and

ear hair.

- Make sure nasal passages are clean. Make sure

outer ear channels are clean and free from wax.

- Do not insert the tip more than 3/16in./5mm.

- Always clean the attachment after each use.

Trimming nose hair

1 Gently move the tip in and out of nose while

turning it around to remove unwanted hairs.

15

English

Trimming ear hair

1 Slowly move the tip round the ear to remove

hairs that stick out beyond the rim of the ear.

2 Gently move the tip in and out of the outer ear

channel to remove unwanted hairs.

Precision shaver

Use the precision shaver after trimming, to shave

unwanted hairs on cheeks, chin and along the

beard with precision. Make sure to pre-trim your

beard first, with the full-size hair trimmer without

comb, to obtain the best result.

Note: Use the precision shaver to remove

remaining hairs and detailing your beard style. It is

not suitable for a full face shave.

1 Gently press the precision shaver onto the skin

and shave along contoured edges to remove

any unwanted hairs.

Cleaning

Never use scouring pads, abrasive cleaning

agents or aggressive liquids such as gasoline or

acetone to clean the product.

Never dry the trimmer teeth with a towel or

tissue, as this may damage the trimmer teeth.

After every use: cleaning under the tap

1 Turn off the appliance and disconnect from the

wall socket.

2 Remove any comb or cutting element from the

appliance.

3 Rinse the hair chamber under a warm tap.

16

English

4 Clean the cutting element and comb under a

warm tap.

5 Carefully shake off excess water and let all parts

air dry completely.

Thorough cleaning

1 Turn off the appliance and disconnect from the

wall socket.

2 Wipe the handle of the appliance with a dry

cloth.

3 Remove any comb or cutting element from the

appliance.

4 Remove any hairs that have accumulated in the

hair chamber with the cleaning brush supplied.

5 Remove any hairs that have accumulated in the

cutting elements and/or combs with the

cleaning brush supplied.

6 Clean the cutting elements under a warm tap.

7 Clean the combs under a warm tap.

8 Carefully shake off excess water and let all parts

air dry completely.

Cleaning the nose trimmer

Clean the nose trimmer immediately after use and

when a lot of hair or dirt has accumulated on the

nose trimmer head.

1 Rinse the nose trimmer head with hot water.

2 Turn on the appliance and rinse the nose

trimmer head once more to remove any

remaining hairs. Then turn off the appliance

again.

For a thorough clean, immerse the nose trimmer

head in a bowl with warm water for a few minutes

17

English

and then turn on the appliance to remove

stubborn hair/debris.

3 Carefully shake off excess water and let all parts

air dry completely.

Cleaning the precision shaver

1 Hold the precision shaver at the grooves on

each side and pull the top part off the bottom

part.

2 Blow and/or shake out any hair that has

accumulated inside the precision shaver.

Do not use the cleaning brush to remove hairs

from the shaving foil.

3 Clean the top part of the precision shaver under

a warm tap.

4 Carefully shake off excess water and let all parts

air dry completely.

5 Reattach the top part onto the bottom part of

the precision shaver.

Storage

- Store the appliance in the pouch supplied.

Note: Make sure the appliance is dry before you

store it in the pouch.

Ordering accessories

To buy accessories or spare parts, visit

www.shop.philips.com/service or go to your

Philips dealer. You can also contact the Philips

Consumer Care Center in your country (see the

international warranty leaflet for contact details).

18

English

Recycling

- This symbol means that this product shall not

be disposed of with normal household waste

(2012/19/EU).

- This symbol means that this product contains a

built-in rechargeable battery which shall not be

disposed of with normal household waste

(2006/66/EC). Please take your product to an

official collection point or a Philips service

center to have a professional remove the

rechargeable battery.

- Follow your country’s rules for the separate

collection of electrical and electronic products

and rechargeable batteries. Correct disposal

helps prevent negative consequences for the

environment and human health.

Removing the rechargeable battery

Only remove the rechargeable battery when

you discard the product. Before you remove

the battery, make sure that the product is

disconnected from the wall socket and that

the battery is completely empty.

Take any necessary safety precautions

when you handle tools to open the product

and when you dispose of the rechargeable

battery.

1 Check if there are screws in the back or front of

the appliance. If so, remove them.

19

English

2 Remove the back and/or front panel of the

appliance with a screwdriver. If necessary, also

remove additional screws and/or parts until you

see the printed circuit board with the

rechargeable battery.

3 Remove the rechargeable battery.

Warranty and support

If you need information or support, please visit

www.philips.com/support or read the

international warranty leaflet.

Warranty restrictions

Cutting units are not covered by the terms of the

international warranty because they are subject to

wear.



20

English

Pagina se încarcă ...

Philips MG5730/15 Manual de utilizare

Acest manual este potrivit și pentru

Philips MG5730/15 Manual de utilizare

în alte limbi

Lucrări conexe

Alte documente