Yamaha V3 Manualul proprietarului

Categorie
Mixere audio
Tip
Manualul proprietarului
EN
OWNER’S MANUAL
OWNER’S MANUAL
Ve r sion 3.5
Ve r sion 3.5
DME Designer Owner’s Manual
2
Getting Started with DME Designer
In this manual the abbreviation “DME” refers to the DME64N/DME24N/DME8i-C/DME8o-C/DME4io-C/
DME8i-ES/DME8o-ES/DME4io-ES. The abbreviation “DME Satellite” refers to the DME8i-C/DME8o-C/
DME4io-C/DME8i-ES/DME8o-ES/DME4io-ES.
Your DME, SP2060, ICP1 and the DME Designer software, let you build a custom audio system
installation that can support an incredible variety of conditions. You can build an entire system from
input to output with the DME Designer software, then send the system data to the DME and SP2060
which become independent processors.
An amazing variety of applications are possible, including audio installations, sub-mixing, speaker
system control, matrix/routing, and multi-effect processing.
SPECIAL NOTICES
The software and this Owner’s Manual are the exclusive copyrights of Yamaha Corporation.
Copying of the software or reproduction of this manual in whole or in part by any means is
expressly forbidden without the written consent of the manufacturer.
•Yamaha makes no representations or warranties with regard to the use of the software and
documentation and cannot be held responsible for the results of the use of this manual and the
software.
The company names and product names in this Owner’s Manual are the trademarks or registered
trademarks of their respective companies.
The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may
appear somewhat different from the screens which appear on your computer.
Future upgrades of application and system software and any changes in specifications and
functions will be announced separately.
Windows
®
is the registered trademark of Microsoft
®
Corporation.
NOTE
Here the abbreviation “DME” does not include the “DME32.”
NOTE
This manual is based on the English version of operating system. Illustrations, command names, window names, and similar
information are from that version. Some items may differ from what you see on the computer screen, depending on which
operating system you are using.
DME Designer Owner’s Manual
3
The DME Audio System Network
In an audio system including one or more DME units and/or SP2060 units, the “control space” is
logically organized using the concepts of “Area”, “Zone”, and “Device Group”. The space covered by
the entire system is the “Area”, while independent sonic spaces within that Area are called “Zone” A
group of DME or SP2060 units assigned to the same function are considered a “Device Group”.
An Area is comprised of one or more Zones, and each Zone can include up to 32 Device Groups.
A single Device Group can include as many as 16 devices. Each Device Group has one “Group
Master”.
NOTE
Meter response may deteriorate as the number of meters displayed in a single device group in DME Designer increases. In
such cases meter response can be improved by dividing the device group.
See “Changing Device Groups” on page 283.
NOTE
DME and SP2060 units cannot be combined in the same Device Group.
NOTE
All devices in a Device Group must be on the same subnet.
Area
Zone1
Zone2
Zone1
Device Group1
Device Group2
Device Group1
Device1
(Group Master)
Device2
(Slave)
DME Designer Owner’s Manual
4
The DME Designer Software Application
The DME Designer software application provides a convenient, central interface for the creation and
control of DME-based audio systems.
By connecting the computer on which the DME Designer application is running to a Group Master it
becomes possible to control multiple devices simultaneously.
With DME Designer, DME audio systems can be designed and configured via a comprehensive block-
diagram interface on the computer screen.
The main concepts used in the creation of DME audio systems are “Components”, “Configurations”,
“Preset Parameters”, and “Scenes”.
Components
Any independent signal-processing block, such as an equalizer, compressor,
input/output module, or external device control object is a “Component”.
Configurations
A “Configuration” is group of components, including their placement and interconnections.
DME Designer Owner’s Manual
5
Preset Parameters
The set of parameters for all components in a Configuration is know as the Configuration's “Preset
Parameters”.
Scenes
A Configuration and its Preset Parameters are a “Scene”.
DME settings as well as Configuration and Preset Parameter settings are sent from the DME Designer
application running on the computer to the Device Master via USB or Ethernet, allowing each device
to function as a separate processor, independently from the computer. It is also possible to keep the
DME Designer application on line and control the devices in real time.
It is possible to use the DME Designer to create Configurations that include multiple devices when the
appropriate devices are connected.
Although it is possible to have multiple Zones in an Area, multiple Device Groups in a Zone, and
multiple Scenes and Configurations in a Device Group, only one Area, Zone, Device Group and
Configuration can be active and editable via the DME Designer at any one time. The active elements
are known as the Current Zone, Current Device Group, Current Scene, and Current Configuration.
Scenes1
Scenes2
Scene
s
999
MATRIX MIXER PARAMETRIC EQ
PARAMETRIC EQ
DELAY DELAYCROSSOVER
2WAY
COMP/LIMITER
PARAMETRIC EQ
DELAY CROSSOVER
2WAY
COMP/LIMITER
COMP/LIMITER GATE
PARAMETRIC EQ
DELAY COMP/LIMITER GATE
PARAMETRIC EQ
DELAY COMP/LIMITER GATE
PARAMETRIC EQ
DELAY COMP/LIMITER GATE
16 x 8
8 BAND
= Components
Æ GATE
• Attack
• Decay
• Range
• Threshold
• Key in
• Hold
Scenes
Composition of scene
Preset
Parameters
Configurations
DME Designer Owner’s Manual
6
Data Handled by a DME Audio System
DME Data Structure
* Some settings not included.
Common Overall Data
Scene Link Settings Settings required for linked scene operation between multiple
groups.
Data for Each Device Group
User Defined Button Settings Settings required for component parameter control from the
DME64N/DME24N or ICP1 panel.
Up to 24 parameters can be registered for control.
Global Parameter Link Settings Settings required for linked operation of the same types of
parameters between multiple devices.
Data Used by the Scene Manager
MIDI program Change Settings Settings required to allow scene selection via MIDI commands.
Scenes The information required to switch audio data processing
setups.
Scenes include configurations and preset data.
The Scene Manager facilitates registration and management of
scene data.
Up to 999 scenes can be registered, and registered scenes are
managed by their scene numbers.
Data for Each Device
Configurations A combination of the audio signal processing, audio input/
output, and external device control components and their
interconnections, created to create the desired audio system.
Local Parameter Link
Settings
Settings that allow linked operation between similar types of
internal DME parameters.
Component Link
Settings
Settings that allow linked operation between similar types of
internal DME components.
External Device
Settings
Settings required to allow control of component parameters from
external devices.
Independent settings are required for each device.
The external devices that can be used are as follows:
• MIDI Controller (MIDI Control Change, Parameter Change).
• GPI Controller.
• DAW Controller.
• AMX, Crestron, and other remote controllers.
• PM5D or other compatible mixing console (controlling DME
internal head amp)
Preset Parameters The settings for the components in a configuration.
Audio processing setups can be switched by changing the
preset parameters.
Components included in the preset parameter set are as
follows:
• GEQ, MatrixMixer, and other audio signal processing
components.
• Internal AD/DA (DME24N), Cascade (DME64N), and MY card
I/O components*.
• Components for external devices such as the AD8HR and
AD824 remote head amplifiers.
DME Designer Owner’s Manual
7
SP2060 Data Structure
Common Overall Data
Scene Link Settings Settings required for linked scene operation between multiple devices.
Data for Each Device
Scenes The information required to switch audio data processing setups.
Scenes include configurations and preset data, The last Library name recalled is
specified.
The Scene Manager facilitates registration and management of scene data.
Up to 99 scenes can be registered for 12 preset areas and 87 user areas, and reg-
istered scenes are managed by their scene numbers.
Configurations A combination of the audio signal processing, audio input/output, and external
device control components and their interconnections, created to create the
desired audio system.
Local Parameter Link
Settings
Settings that allow linked operation between similar types of internal SP2060
parameters.
Preset Parameters The settings for the components in a configuration.
Audio processing setups can be switched by changing the preset parameters.
Preset parameters can be recalled by SP2060 units, but not edited.
Data for Each Component
Library Settings specific to the speakers to be used.
In addition to the preset data provided, settings can be created by the DME
Designer.
DME Designer Owner’s Manual
8
One DME unit/Device Group
No.
001
002
003
004
005
006
....
Configuration
Output Processor for Dome
Output Processor for Dome
Output Processor for Dome
Output Processor for Dome
Output Processor for Dome
...
Scene Name
All On
Opening
Band Set 1
Band Set 2
Band Set 3
...
Preset Parameters
All On
BGM & MC
Band 1
Band 2
Band 3
Microphone
Mixer
External Head Amp
etc...
Power Amp
Processor
etc...
Input
External Device (MIDI, GPI, DAW, AMX/Crestron, controlling DME internal head amp)
Audio signal
Notes
Device Group
Output
Control signal
Data explanation
Setting preset parameters
LCD Display
Dome Low
Dome Mid
Dome Hi
....
Assigned Parameter
Crossover: Output Low: Level
Crossover: Output Mid: Level
Crossover: Output High: Level
(No Assign)
(No Assign)
(No Assign)
User Defined Button Scene Manager
Specifies the parameter to be changed.
Specifies the configuration
and preset parameters combination.
Configuration
Output Processor for Dome
Local parameter link settings
External device settings
MY8-AE
(Input)
MY8-AE
(Output)
Cross-
Over
EQ
Delay EQ Dyn
Delay
All On Component value
BGM & MC
Band 1
Band 2
Band 3
Preset parameters for output processor
Set the value
Two DME units/Device Group (When one DME unit doesn’t provide sufficient processing power, up to 16 DME units can be used)
DME#2
Configuration
Output Processor
for Hall
Local parameter link settings
External device settings
All On
BGM & MC
Band
Device Group
LCD Display
Dome Low
Dome Mid
Dome Hi
Hall Low
Hall Mid
Hall Hi
....
Assigned Parameter
#1: Crossover: Output Low: Level
#1: Crossover: Output Mid: Level
#1
:
Crossover
:
Output High
:
Level
#2: Crossover: Output Low: Level
#2: Crossover: Output Mid: Level
#2
:
Crossover
:
Output High
:
Level
No.
001
002
003
004
005
006
....
Configuration
Output Processor for Dome
Output Processor for Dome
Output Processor for Dome
Output Processor for Dome
Output Processor for Dome
...
Scene Name
All On
Opening
Band Set 1
Band Set 2
Band Set 3
...
Preset parameters
All On
BGM & MC
Band 1
Band 2
Band 3
Configuration
Output Processor for Hall
Output Processor for Hall
Output Processor for Hall
Output Processor for Hall
Output Processor for Hall
...
Preset parameters
All On
BGM & MC
Band
Band
Band
User Defined Button
Scene Manager
DME#1
Configuration
Output Processor
for Dome
Local parameter link settings
External device settings
All On
BGM & MC
Band 1
Band 2
Band 3
Preset parameters Preset parameters
External Device (MIDI, GPI, DAW, AMX/Crestron, controlling DME internal head amp)
Microphone
Mixer
External Head Amp
etc...
Power Amp
Processor
etc...
Input Output
Input Output
DME#1
DME#2
For DME#2
For DME#1
Specifies the parameter to be linked between DME units.
Global Parameter Link
For DME#1 For DME#2
Audio signal
Notes
Control signal
Data explanation
Setting preset parameters
Selects the parameter to be
edited from two DME units.
Specifies the configuration and preset
data combination in each DME
DME Designer Owner’s Manual
9
System Requirement
NOTE
Separate SP2060 units normally handle scenes independently, but the Scene Link function can be set from the DME
Designer to allow linked scene operation. See “Scene Link Manager” on page 146.
Operating System Windows
®
XP Professional/XP Home Edition/2000 Professional
CPU 1 GHz or better Intel
®
Core™/Pentium
®
/Celeron
®
family processor
Memory 256 MB or more
Hard Disk Capacity 300 MB or more
Display 1,280 x 1,024 pixels or better/High Color 16 bit or better
Other Mouse, CD-ROM drive, 100Base-TX/10Base-T Ethernet or USB connection
environment.
Operating System Windows
®
Vista Ultimate/Business/Enterprise
CPU 1.4 GHz or better Intel
®
Core™/Pentium
®
/Celeron
®
family processor
Memory 1 GB or more
Hard Disk Capacity 300 MB or more
Display 1,280 x 1,024 pixels or better/High Color 16 bit or better
Other Mouse, CD-ROM drive, 100Base-TX/10Base-T Ethernet or USB connection
environment.
Operating System Windows
®
7 Ultimate/Professional
CPU 1.4 GHz or better Intel
®
Core™/Pentium
®
/Celeron
®
family processor
Memory 1 GB or more
Hard Disk Capacity 300 MB or more
Display 1,280 x 1,024 pixels or better/High Color 16 bit or better
Other Mouse, CD-ROM drive, 100Base-TX/10Base-T Ethernet or USB connection
environment.
NOTE
The system requirements described above are applied to the DME Designer version 3.5.1. Keep in mind that the software is
often updated and the system requirements are subject to change. You can check the latest version information and its
system requirements at the following website.
http://www.yamahaproaudio.com/
The system requirements may differ slightly depending on the particular computer.
DME Designer Owner’s Manual
10
Main Changes from V1.0 to V1.1
Main Panel Window
Instead of the former Parameter Link function, there are now two functions: a Global Link function
that links parameters within all DMEs in a zone and a Local Link function that links parameters
within a single DME unit. (page 90)
The Synchronization function can now not only send data from DME Designer to the DME unit,
but can also synchronize by reading data from the DME unit. (page 92)
Scene Increment/Decrement and Time Adjustment can now be assigned in the GPI input
function. (page 109)
DME unit events can now be recorded by the Event Logger function and displayed in the Event
Logger window. (page 169)
The time for executing an event can now be set by using the Event Scheduler function.
(page 134)
Parameters in the current configuration can now be listed on the display and printed out by using
the Parameter List function. (page 139)
The Wav File Manager can manage Wave files played by the Wav File Player. (page 146)
Settings can be made by the DAW Control function that are used for controlling DMEs from a
DAW controller. (page 152)
DME unit data can now be saved as a backup file by using the Backup function. (page 152)
Designer Window
The port name display can now be switched between long name display and short name display.
(page 197)
DME64N cascade connections can now be set. (page 212)
Priority items can now be set when compiling configurations by using the [Compile Priority]
function in the “Preferences” dialog box. (page 211)
Delay time can now be displayed for each component by using the Show Signal Delay function.
(page 295)
Monitoring points can now be edited by using the “Monitoring Point List” dialog box. (page 296)
The status of connections in a configuration can now be analyzed in advance by using the
Analyze function, without connecting the DME unit. (page 298)
•You can now set the action that occurs when you double-click a user module object. You can also
turn user module security ON or OFF, and set a password. (page 299)
Libraries with component parameters saved in them can now be recalled from the context menu
for a component object. (page 356)
•A new rule for wiring prohibits connections to terminals that would short the terminator.
Component Editor/Component
•A status bar has been added to the component editor. It displays the component name,
component ID, and parameter IDs for parameters that are being edited. (page 310)
•A Snap function has been added that records parameters in the editor temporarily. Parameter
sets can then be switched by using the Snap buttons. (page 352)
The meter's peak hold function can now be turned ON or OFF. (page 349)
•A Wav File Player component has been added for playing Wave files. (page 420)
An effect component called SPX has been added that supports many different effect
applications, such as reverb, delay, and modulation effects, along with complex combinations of
multiple effects. (page 461)
•A Slot Out component editor has been added. (page 473)
An Undo/Redo function is now available when using the design mode. It can undo the most
recent operation (control movement/resize/deletion).
DME Designer Owner’s Manual
11
Changes from V1.1 to V1.2
Main Panel Window
The synchronization algorithm has been refined for faster synchronization.
Synchronization now can be executed from DME to DME Designer without any break in the
sound.
In the following cases, synchronization can be executed from DME Designer to DME without any
break in the sound:
The second or later synchronization after starting DME Designer* and when differences in data
between the DME and DME Designer are limited to parameters within components, AD824/
AD8HR/DME24N AD/DA setting data, or MY card setting parameters.
* If the file was saved when DME Designer was closed, there will be no break in sound even in the first
synchronization after saving.
Compile speed has been increased.
Up to three times faster when AutoDelayCompensation is turned On.
Up to two times faster when AutoDelayCompensation is turned Off.
Synchronization is possible when no MY card or a different MY card is installed in the DME unit
(a confirmation dialog will appear).
An option to automatically close the dialog after synchronization has been added. (page 50)
•A progress bar has been added to the Synchronization dialog. (page 49)
•A message appears to warn when synchronization will cause muting.
The following operations can be performed while on line:
- Scene storage.
- Scene name changes.
- Fade ON/OFF and Fade Mode changes.
- Fade time changes.
- Parameter link setting changes.
When a scene store is executed, that scene becomes the current scene.
•Wave files can be saved as DME data files, and are included in import/export operations.
(page 42)
•Wave files can be saved in the Wav file library.
Event Log events can be output via GPI. (page 77)
The on-line indicator appears as a button which can be used to switch between on-line and
off-line. (page 57)
Scene edits cause the EDIT indicator to appear. (page 55)
An auto file save function (Auto Save, post synchronization) has been added. (page 71)
Different zones can be specified for use by different users. (page 153)
Scene parameters related to User Defined Button, Program Change, GPI In and GPI Out can be
set via the Scene Manager. (page 80)
[Select All] and [Clear All] buttons have been added to the Scene Manager Recall Safe dialog.
(page 84)
User Control can be created for individual users as well as security levels. (page 87)
•A Remote Control Setup List has been added. (page 134)
This list can be used to make detailed settings for a new software protocol that allow the DME to
be controlled from AMX, Crestron, and similar devices.
Refer to the “DME-N Remote Control Protocol Specifications” document for details about the
communication protocol. Information about the “DME-N Remote Control Protocol Specifications”
document can be found at the Yamaha pro Audio website (URL below).
http://www.yamahaproaudio.com/
It is possible to specify whether listed events will be executed by the Event Scheduler.
(page 134)
DME Designer Owner’s Manual
12
The order of same-time events can be changed in the Event Scheduler. (page 134)
Exceptions can be specified for Event Scheduler execution day/time. (page 102)
Event Scheduler execution times can be specified in 1-second increments. (page 101)
Head amp gain and MY-Card can be set via GPI, MIDI, User defined Button, DAW Control.
Parameter values, scene recall, GPI output, Wave file playback, and head amp gain can be set
via the User Defined Buttons. (page 127)
The Component Lock function dialog is separate from the Parameter List dialog. (page 145)
Shortcuts can be freely set as required. (page 151)
Files can be saved in the DME unit. (page 68)
•A [Close All Editor Windows] button has been added to the Window menu. (page 67)
External head amp parameters will be recognized by the DME unit when either the DME or the
external head amp (AD824, AD8HR) are turned on. Execute a scene recall to send DME settings
an external head amp.
This manual is now separate from the DME Designer installer, and can not be accessed from the
DME Designer menus.
Designer Window
The following operations can be carried out via the shortcut keys.
- Navigator
- Activate Navigator
- Activate Toolkit
- Activate Design Window
- Select Left Port and Start Wiring
- Select Right Port and Start Wiring
- Wire Auto Single to Right
- Wire Auto Multi to Right
- Wire Auto Single to Left
- Wire Auto Multi to Left
- Delete Wire
It is now possible to simultaneously edit multiple objects of the same type.
Example: Change the thickness or color of multiple wires at once.
Files related to user modules (user module files, library files, user module editor files) can be
combined and exported/imported as a single file.
Port colors can be independently specified for each port type. (page 201)
Default wire thicknesses and types can be independently specified for each port type.
An automatic hot-spot connection function has been added. (page 275)
Port display has been added to External Device, Picture, DME, and ICP1 objects.
When drawing wires the keyboard cursor keys can be used to move the mouse cursor, and the
<Enter> key can be used to create nodes.
When drawing wires <Shift> key plus <> key and <Shift> key plus <> key combinations can
be used to automatically connect horizontally-aligned hot spots.
DME object ports can be freely specified.
Compilation of configurations with loop connections is possible when Auto Delay Compensation
is On.
The name has been changed from “Foot Monitor” external device to “Floor Monitor.”
Addition External Device types have been provided.
External Devices can be double-clicked to open a file saved by other applications. (page 224)
Picture objects can be double-clicked to open a specified editor. (page 240)
•Text objects can be double-clicked to open a specified editor. (page 243)
DME Designer Owner’s Manual
13
User module port labels can be edited. (page 237)
Graphics can be placed to represent user modules. (page 236)
The Legend field automatically resizes to accommodate project names and titles of different
lengths.
•A Generic “MY-Others” setting has been provided to accommodate third-party MY cards.
Component Editor Window
Undo and Redo are now shortcut compatible.
•A scroll bar appears when the size of the component editor window is reduced.
The size and position of the component editor window are memorized.
An option to allow mouse-over zooming of the edit box has been added. (page 313)
•A [Back] button that allows switching between related parent and child windows has been
added. (page 310)
•A [Close All Editor Windows] button has been added to the contextual menu.
Source Selector, Speaker Processor, Limiter, Slot In, Cascade In, and Cascade Out components
have been added.
The Delay algorithm has been revised. (page 389)
- LEVEL and MUTE are effective when Delay is Off for each channel.
- The name of the overall Delay [On] parameter has been changed to [All Bypass].
The bus send level range for Delay, Matrix, and Matrix Mixer components has been changed to
- through 0.0 dB.
Snap copy is possible. (page 353)
Snap can be retained until the application is quit or another file is opened.
Security status is displayed in the user module editor status bar.
Multiple controllers can be selected by clicking while holding the <Ctrl> key when the editor is in
the design mode. (page 348)
[Picture], [Text], [Box], [Ellipse], and [Frame] have been added to the tool palette of the user
module editor and user control editor design mode. (page 315)
Controller properties can be accessed by double-clicking controllers in the user module editor or
user control editor design mode. (page 334)
Picture and Text objects can be clicked to open a specified editor in the user module editor or
user control editor.
The User Module Editor and User Control Editor offer a greater range of customization options for
color, size. etc., of the placed controls.
MIDI Setup
•A MIDI Setup minimize function has been added.
V1.2 Precautions
When using project files (*.daf) created by version 1.1.5 or earlier, synchronize from the DME
Designer to the DME unit for the first synchronization.
•Project files (*.daf) created using version 1.2 will not open properly on version 1.1.
IN
Input
Mute
Input
Level
Input
Mute
Input
Level
On
Delay On
Delay All Bypass
OUT
OUT
Mute Level
On Mute Level
IN
Delay
Delay
DME Designer Owner’s Manual
14
Changes from V1.2 to V2.0
General
Support added for DME8i-C/DME8o-C/DME4io-C, SP2060 units and MY16-CII.
“Device Groups”, or groups of the same type of device, have been added at the lowest Zone
level.
It is now possible to have one master device per device group rather than one master device per
zone. This means that it is possible to have multiple master devices in a single zone.
•Group masters can now be assigned regardless of the IP address. This makes it possible to have
multiple device groups at a single network address.
Configurations can be created and deleted for each device group.
Component
•A Feedback Suppressor component has been added. (page 409)
The Speaker Processor component PEQ “Q” parameter now goes to “63”. (page 454)
Main Panel Window
Firmware and component data can now be updated simultaneously. (page 178)
•A Recovery Update function that allows recovery from program corruption has been added.
(page 180)
•A Component Link function that allows simultaneous linking of all component parameters has
been added. (page 90)
Scene Link function that allows simultaneous control of multiple devices in different device
groups has been added. (page 146)
•A Protect function has been added to the scene manager. (page 80)
Card settings are no longer included in scene data.
•A Utility window has been added to allow editing of device utility settings. (page 162)
The Local Parameter Link display order has been changed. (page 90)
Parameter Link operation can now be turned on or off for each device group. (page 90)
Compilation and analysis is now possible even if no connections have been made.
Navigator window hide/show can now be selected from the main window.
The Event Logger can now display only the event data for a specified device. (page 73)
The GPI terminal names have been changed from [CH] to [PORT].
Designer Window
•A hand tool for window movement has been added. The hand tool can be selected via the hand/
arrow icon in the toolbar, or from the [Tools] menu. The hand tool can also be temporarily
selected by holding the spacebar on your keyboard.
Window magnification and reduction can now be controlled via the mouse wheel while holding
the keyboard “Ctrl” key.
Horizontal scrolling can be controlled via the mouse wheel while holding the keyboard “Shift” key.
The Edit Mode on/off can now be changed from the tool bar. (page 183)
Scene information now appears in DME objects, and the Scene Manager can be launched from
the scene information display. (page 80)
An [On-line] button has been added to DME objects, and synchronization is now possible.
(page 57)
Sampling frequency display has been added to the resource meter window. (page 187)
DME Designer Owner’s Manual
15
Sampling frequency display has been added to the configuration window status bar. (page 291)
The sampling frequency is now displayed during analysis.
Double-clicking the component name now opens the properties window.
Organization of the Tool Kit window has been changed. (page 189)
•A [Draw Image] checkbox that displays or hides the worksheet background image file has been
added to the Sheet properties. (page 204)
[Configuration Manager] has been added to the contextual menu that appears when a DME or
SP2060 object is right-clicked. (page 208,page 217)
[Recall Component Library] and [Store Component Library] now appear in the contextual menu
that appears when a component is right-clicked, even when the Edit Mode is OFF.
The Compile Settings can now be edited for each DME unit. (page 211)
Only one Zone window is now provided for multiple configurations.
The [Export DXF] and [Preferences] commands have been moved from the [Print] menu to the
[Tools] menu.
[Configuration] has been changed to [Configuration Manager] in the [Tools] menu.
When [Prohibit Diagonal Connections] in the [Tools] menu is active it is possible to select 2
diagonal points and those points will automatically be connected by a combination of horizontal
and vertical wires.
Component Editor Window
•A [Level Meter Enable] command that displays or hides the meter values has been added to the
contextual menu. Hiding the meters can result in increased communication speed in some
cases. (page 350)
•A [Display Order] function that allows the order of the controllers to be changed as required has
been added to the User Control Editor and User Module Editor. (page 315)
An [Add Component to Component Link] command has been added to the controller contextual
menu.(page 360)
The registered group is now displayed in the [Add Parameter to Parameter Link] submenu of the
contextual menu of controllers registered for Parameter Link operation.(page 358)
Increased speed when selecting and dragging a large number of controllers in the User Control
Editor and User Module Editor
It is now possible to switch from the Navigator window to Zone display while online.
V2.0 Precautions
Please use DME Designer V2.0 with DME64N/24N V2.0 or higher, DME8i-C/DME8o-C/DME4io-C
V2.0 or higher, and SP2060 V1.1 or higher.
See the Yamaha Pro Audio website for compatibility details (http://www.yamahaproaudio.com/).
When DME64N/24N and DME8i-C/DME8o-C/DME4io-C are used together in the same device
group, faster communication speed as well as smoother DME Designer meter display can be
obtained by assigning a DME8i-C/DME8o-C/DME4io-C unit as the device group master.
DME Designer Owner’s Manual
16
Changes from V2.0 to V3.0
General
DME8i-ES/DME8o-ES/DME4io-ES support.
The DME Designer and DME-N Network Driver installers have been combined, so the
appropriate DME-N Network Driver version is now installed automatically with the DME Designer
application.
The following connections to the Slave DME units are now possible when a DME Satellite unit is
assigned as the Device Group Master:
- USB/Ethernet connection to the computer (DME Designer).
- Cascade connection to control from the PM5D console (DME64N only).
Component
Ambient Noise Compensator component added (page 369).
Audio Detector component added (page 371).
Auto Gain Control component added (page 372).
Auto Mixer II component added (page 421).
Simple Mixer component added (page 440).
Room Combiner component added (page 450).
Matrix Mixer and Router component variations added.
Main Panel Window
•To allow project information to be easily reproduced on a different computer, it is now possible to
export and import all necessary files at once, rather than only project files with the “.daf”
extension (page 43).
•A Device Information window that lists the status of all devices has been added (page 181).
It is now possible to individually set each user control to determine whether it will open
automatically when the project file is opened (page 87).
In accordance with the above change, the Startup User Control item has been removed from the
Security dialog box.
It is now possible to assign Direct Parameter Value to the GPI input function, and assign Direct
Parameter Value and Audio Detector to the GPI output function (page 107, page 117).
An option that automatically saves the project file (.daf extension) in the DME unit when going
online has been added (page 93).
It is now possible to control internal DME-24N/DME8i-C/DME4io-C/DME8i-ES/DME4io-ES head
amps from a PM5D or other compatible mixing console (page 136).
Remote control from AMX, Crestron, and similar controllers is now possible via Ethernet
connection only for DME Satellite units. (page 166).
The display format of the parameter values displayed in the Remote Control Setup List and
Parameter List dialog box can now be switched between the internal settings and the values
displayed in the editor windows (page 134, page 142).
The Event Logger window can now display additional error messages shown on the DME display
panel (page 78).
It is now possible to set the DME unit so that the internally stored event log is not erased
(page 75).
Improvements have been made to the additional error message information shown in the Event
Logger window.
The DME unit internal clock and DME Designer time display now support daylight saving time
(DST) (page 172).
Firmware updates can now be applied to entire device groups, for improved speed and
efficiency.
DME Designer Owner’s Manual
17
Designer Window
It is now possible to set a “clear” background color for text, box, and ellipse objects (page 243,
page 245, page 247).
Password entry is now required when opening a User Module Properties dialog box or saving/
exporting in a user module to which security has been applied.
Linked software applications can now be launched from the Slot component contextual menu
(page 231).
User module templates that use the same library are now categorized and displayed as user
module groups (page 300).
Image files are now included in User Module exports.
Component and parameter links can now be copied when DME objects, components, and user
modules are copied/pasted or duplicated.
Parameter links are now saved when User Module data is saved/exported.
When already-placed picture files are replaced, they will be updated and displayed correctly
without the need to restart the DME Designer application.
Component Editor Window
[Line] and [Scene Recall] tools have been added to the User Module Editor and User Control
Editor design modes, allowing placement of lines and scene recall buttons (page 322).
In the User Module Editor and User Control Editor it is now possible to convert placed sliders to
knobs, and vice-versa (page 333).
More options are available for customizing the controls listed below in the User Module Editor
and User Control Editor:
- A property dialog box has been added for sliders, allowing customization of direction, scale,
color, size, and other parameters (page 335).
- Level meter size can be customized (page 337).
- A property dialog box has been added for slider level meters, allowing customization of
direction and size (page 338).
- Knob color and knob background color can be customized (page 334).
- Text background color can be customized (page 342).
- A property dialog box has been added for indicators, allowing customization of color and size
(page 338).
V3.0 Precautions
Use DME Designer V3.0 only with DME64N/24N V3.0 or higher, DME Satellite V3.0 or higher, and/or
SP2060 V1.2 or higher. Refer to the Yamaha Pro Audio website (http://www.yamahaproaudio.com/)
details on combinations.
When combining DME64N/24N and DME Satellite units in a device group, be sure to assign a DME
Satellite unit as the device group master. Synchronization cannot be performed if a DME64N/24N is
assigned as the device group master.
When using the Windows Vista operating system, use only USB-MIDI Driver V3.0 or higher, and
DME-N Network Driver V1.2 or higher.
DME Designer Owner’s Manual
18
Changes from V3.0 to V3.5
Component
•Program Ducker component added (page 402).
(V3.5.1) During installation it is possible to select and install speaker library data for third-part
speakers into the Speaker Processor component library.
Main Panel Window
MIDI Setup has been discontinued. Communication ports can now be directly selected via the
[Setup] menu [Communication Port] item. (page 150)
(V3.5.1) [SP2060 Backup] has been added to the main panel window [Hardware] menu, allowing
internal SP2060 data to be transferred to a computer for backup. Multiple SP2060 units can be
restored from the backup data. (page 176)
Designer Window
Improvements in the compiler algorithm achieve greater DSP resource utilization efficiency.
(page 93, page 295, page 298)
MY16-ES64, MY16-EX, and MY16-MD64 I/O cards can now be specified for slot installation.
The TX6n/TX5n/TX4n, ACD1, SB168-ES, IMX644, IPA8200, and NEXO products can now be
specified as external devices. V3.5.1 adds the IM8, MSR250, and other devices.
When cascade connecting DME64N units across device groups, unit numbers are automatically
assigned when a connection is made between the [CAS IN] and [CAS OUT] terminals in the
Zone window.
Others (Firmware V3.09 changes)
When controlling DME units remotely from a PM5D using the DME Control function, it is now
possible to set an ID number other than “2” for the group master DME unit. In this case the PM5D
firmware must be updated to V2.20 or higher.
It is now possible to replace the default DME64N/24N startup screen (normally the model name)
with an original graphic file. (page 69)
V3.5 Precautions
Use DME Designer V3.5 only with DME64N/24N V3.0 or higher, DME Satellite V3.0 or higher, and/or
SP2060 V1.2 or higher. Refer to the Yamaha Pro Audio website (http://www.yamahaproaudio.com/)
details on combinations.
When combining DME64N/24N and DME Satellite units in a device group, be sure to assign a DME
Satellite unit as the device group master. Synchronization cannot be performed if a DME64N/24N is
assigned as the device group master.
When using the Windows Vista operating system, use only USB-MIDI Driver V3.0 or higher, and
DME-N Network Driver V1.2 or higher.
When using the Windows 7 operating system, use only USB-MIDI Driver V3.0.4 or higher, and
DME-N Network Driver V1.2.1 or higher.
DME Designer Owner’s Manual
19
Contents
The DME Audio System Network .............................................. 3
The DME Designer Software Application .................................. 4
Data Handled by a DME Audio System..................................... 6
Changes from V3.0 to V3.5 ..................................................... 18
Chapter 1 Before Using 21
Installing DME Designer .......................................................... 21
Starting DME Designer............................................................ 21
Closing DME Designer ............................................................ 23
Chapter 2 DME Designer Overview 24
Names and Functions of the Windows .................................... 24
Users and Security .................................................................. 29
Files Used by the DME DESIGNER ........................................ 32
Configuration Creation Procedure ........................................... 47
Online ...................................................................................... 48
Chapter 3 Main Panel Window 52
Names and Functions of the Windows .................................... 52
Main Panel Window Menu....................................................... 58
DME File Storage .................................................................... 68
Preferences ............................................................................. 70
Event Logger ........................................................................... 73
Scene Manager ....................................................................... 80
User Control ............................................................................ 87
Parameter Link ........................................................................ 90
Synchronization
(DME Designer and Unit Synchronization).............................. 92
Event Scheduler ...................................................................... 96
Wav File Manager ................................................................. 103
GPI ........................................................................................ 107
MIDI....................................................................................... 120
User Defined Button (User Defined Parameters) .................. 127
DAW Control.......................................................................... 131
Remote Control Setup List .................................................... 134
Internal HA Control ................................................................ 136
Parameter List ....................................................................... 142
Component Lock ................................................................... 145
Scene Link Manager.............................................................. 146
SP2060 Library Manager....................................................... 148
Communication Port Setup.................................................... 150
Shortcut Keys ........................................................................ 151
Security (Creating Users and Making User Settings) ............ 152
Network Setup ....................................................................... 160
Utility...................................................................................... 162
Word Clock ............................................................................ 169
Monitor Out............................................................................ 171
Clock...................................................................................... 172
Language Settings................................................................. 174
Backup................................................................................... 175
SP2060 Backup..................................................................... 176
DME Firmware Update .......................................................... 178
Device Information................................................................. 181
Chapter 4 Designer 183
Editing Configurations ........................................................... 183
Designer Window .................................................................. 184
Toolkit Window ...................................................................... 189
Designer Window Menu ........................................................ 194
Objects .................................................................................. 201
Design Window Shared Settings and Operations ................. 259
Drawing and Editing Wires .................................................... 270
Adding, Deleting, and Renaming a Zone............................... 281
Changing Device Groups ...................................................... 283
Adding, Deleting, and Renaming a Configuration ................. 285
Area Window ......................................................................... 287
Zone Window......................................................................... 288
Configuration Window ........................................................... 291
User Module .......................................................................... 299
Chapter 5 Editor Window 309
Component Editor Window.................................................... 309
User Control Editor/User Module Editor ................................ 315
Operation Mode and Design Mode........................................ 348
Context Menu ........................................................................ 349
Snap ...................................................................................... 352
Library.................................................................................... 354
Creating Parameter Links...................................................... 358
Creating Component Links .................................................... 360
Chapter 6 Component Guide 361
Types of Components ........................................................... 361
Ambient Noise Compensator................................................. 369
Audio Detector....................................................................... 371
Auto Gain Control .................................................................. 372
Crossover .............................................................................. 373
Crossover Processor ............................................................. 377
Delay ..................................................................................... 389
Dynamics............................................................................... 392
Equalizer (EQ) ....................................................................... 404
Fader ..................................................................................... 408
Feedback Suppressor ........................................................... 409
Filters..................................................................................... 410
Meter ..................................................................................... 418
Miscellaneous........................................................................ 419
Mixer...................................................................................... 421
Pan ........................................................................................ 443
Room Combiner .................................................................... 450
Router.................................................................................... 451
Source Selector ..................................................................... 453
Speaker Processor ................................................................ 454
SPX ....................................................................................... 461
Slot ........................................................................................ 472
Cascade (DME64N only)....................................................... 474
Analog Input and Output........................................................ 477
SP2060 Input and Output ...................................................... 479
CobraNet Input and Output ................................................... 480
EtherSound Input and Output................................................ 482
MY-Card ................................................................................ 483
Remote Controlled Head Amp............................................... 487
Component Glossary............................................................. 489
DME Designer Owner’s Manual
20
Appendix 493
Options .................................................................................. 493
Main Display .......................................................................... 495
Parameter Edit Displays ........................................................ 496
Utility Displays ....................................................................... 500
Troubleshooting 505
Index 506
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436
  • Page 437 437
  • Page 438 438
  • Page 439 439
  • Page 440 440
  • Page 441 441
  • Page 442 442
  • Page 443 443
  • Page 444 444
  • Page 445 445
  • Page 446 446
  • Page 447 447
  • Page 448 448
  • Page 449 449
  • Page 450 450
  • Page 451 451
  • Page 452 452
  • Page 453 453
  • Page 454 454
  • Page 455 455
  • Page 456 456
  • Page 457 457
  • Page 458 458
  • Page 459 459
  • Page 460 460
  • Page 461 461
  • Page 462 462
  • Page 463 463
  • Page 464 464
  • Page 465 465
  • Page 466 466
  • Page 467 467
  • Page 468 468
  • Page 469 469
  • Page 470 470
  • Page 471 471
  • Page 472 472
  • Page 473 473
  • Page 474 474
  • Page 475 475
  • Page 476 476
  • Page 477 477
  • Page 478 478
  • Page 479 479
  • Page 480 480
  • Page 481 481
  • Page 482 482
  • Page 483 483
  • Page 484 484
  • Page 485 485
  • Page 486 486
  • Page 487 487
  • Page 488 488
  • Page 489 489
  • Page 490 490
  • Page 491 491
  • Page 492 492
  • Page 493 493
  • Page 494 494
  • Page 495 495
  • Page 496 496
  • Page 497 497
  • Page 498 498
  • Page 499 499
  • Page 500 500
  • Page 501 501
  • Page 502 502
  • Page 503 503
  • Page 504 504
  • Page 505 505
  • Page 506 506
  • Page 507 507
  • Page 508 508
  • Page 509 509
  • Page 510 510

Yamaha V3 Manualul proprietarului

Categorie
Mixere audio
Tip
Manualul proprietarului