16572042_ed3 EN-1
EN
Product Safety Information
Intended Use:
These Air Drills are designed for drilling, honing, reaming and hole sawing.
For additional information refer to Product Safety Information Manual Form 04580353.
Manuals can be downloaded from ingersollrandproducts.com
Product Specications
Models Style
Chuck
Capacity
Free
Speed
in (mm) rpm
QS051, QS051B, QS051BD, QS051D Inline 1/4 (6) 500
QS091, QS091B, QS091BD, QS091D Inline 1/4 (6) 900
QS151, QS151B, QS151BD, QS151D Inline 1/4 (6) 1500
QS201, QS201B, QS201BD, QS201D Inline 1/4 (6) 2000
QS301, QS301B, QS301BD, QS301D Inline 1/4 (6) 3000
QS381, QS381B, QS381BD, QS381D Inline 1/4 (6) 3800
QS511, QS511B, QS511BD, QS511D Inline 1/4 (6) 5100
Models
Sound Level dB(A)
(ISO15744)
Vibration (m/s²)
(ISO28927)
† Pressure (L
p
) ‡ Power (L
w
) Level *K
QS051, QS051B, QS051BD, QS051D 78.6 89.6 3.4 1.2
QS091, QS091B, QS091BD, QS091D 78.2 89.2 3.4 1.2
QS151, QS151B, QS151BD, QS151D 80.2 91.2 3.4 1.2
QS201, QS201B, QS201BD, QS201D 80.2 91.2 3.4 1.2
QS301, QS301B, QS301BD, QS301D 78.9 89.9 3.4 1.2
QS381, QS381B, QS381BD, QS381D 79.5 90.5 3.4 1.2
QS511, QS511B, QS511BD, QS511D 79.3 90.3 3.4 1.2
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
* K = Vibration measurement uncertainty
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specic tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specic application.
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-o, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16575599 and table on page 2. Maintenance frequency is shown in a
circular arrow and dened as h=hours, d=days, and m=months of actual use. Items identied as: