Eizo RX1270 Manualul proprietarului

Important

Please read this “Installation Manual”, and “Instructions for Use”

(separate volume) carefully to familiarize yourself with safe and

effective usage.

•Refer to the “Instructions for Use” for information on the

installation / connection of the monitor.

•For the latest product information including the “Installation

Manual”, refer to our web site :

www.eizoglobal.com

Color LCD Monitor

Installation Manual

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

2

3

CONTENTS

CONTENTS ............................................................. 3

Chapter 1

Basic Operation and Function List ...

4

1-1. Usage of Switches and Operation Guide ... 4

1-2. Basic Operation of the Setting Menu ......... 6

1-3. Function List .................................................. 8

Chapter 2 Adjusting the Screen ........................ 9

2-1. Compatible Resolutions .............................. 9

2-2. Setting Screen Layout (Single / Dual)

and Input Signal ............................................ 9

2-3. Displaying the Sub Window (PinP) ............11

●Setting the input signal for the PinP sub

window ...........................................................12

●Displaying or hiding the PinP sub window .....12

●Setting the display position of the PinP

sub window .....................................................12

●Setting display mode (CAL Switch

Mode) for the PinP sub window .....................12

2-4. Selecting Display Mode

(CAL Switch Mode) ......................................13

2-5. Adjusting Brightness / Colors ....................14

●Adjustment items for each mode ...................14

●Enabling / Disabling Hybrid Gamma PXL ......14

●Adjusting the brightness .................................15

●Adjusting the contrast ....................................15

●Adjusting the color temperature .....................15

●Adjusting the gamma .....................................16

●Adjusting the hue ...........................................16

●Adjusting the color saturation.........................17

●Adjusting the gain ...........................................17

2-6. Enabling or Disabling Sharpness

Recovery (the Function of Correcting

Image Clarity) ...............................................18

Chapter 3 Controlling Monitor Quality ........... 19

3-1. Using the SelfCalibration Function ...........19

●Executing SelfCalibration ...............................19

●Checking the SelfCalibration results ............. 20

3-2. Using the Grayscale Check Function ....... 20

●Performing Grayscale Check ........................ 20

●Checking the Grayscale Check results ..........21

3-3. Setting Whether to Display / Hide

Warnings or QC History ..............................21

Chapter 4

Using the Monitor for a Long Time ...

22

4-1. Setting the Power Saving Mode ................ 22

Chapter 5 Conguring Monitor Settings ........ 23

5-1. Setting RadiLight Area ............................... 23

5-2. Specifying the Language ........................... 23

5-3. Showing the Icon for Switching the USB

Ports in the Operation Guide .................... 24

5-4. Switching PCs Used to Operate USB

Devices ......................................................... 24

5-5. Switching the DisplayPort version ........... 25

5-6. Adjusting Brightness of the Power

Switch Indicator .......................................... 25

5-7. Skipping Unused Display Modes .............. 25

5-8. Enabling or Disabling DisplayPort

Communication in Power Saving Mode ... 26

5-9. Locking Operation Switches ..................... 26

5-10. Setting Whether to Display / Hide the

Grayscale Warning ..................................... 27

5-11. Acquiring Life Estimation Data ................. 27

5-12. Rotating the Setting Menu Display ........... 27

5-13. Setting Whether to Display / Hide the

EIZO Logo .................................................... 28

5-14. Viewing the Monitor Information .............. 28

5-15. Resetting to Defaults .................................. 29

●Resetting the color adjustment value ............ 29

●Resetting all settings ..................................... 29

Chapter 6 Troubleshooting .............................. 30

6-1. No Picture .................................................... 30

6-2. Imaging Problems ........................................31

6-3. Other Problems ........................................... 32

●Error Code Table ........................................... 33

Chapter 7 Reference ........................................ 34

7-1. Arm Installation Procedure........................ 34

7-2. How to Use USB Hub Function .................. 35

7-3. Main Default Settings ................................. 36

7-4. Attaching and Removing RadiLight

Focus (Spotlight) ..........................................37

Appendix .............................................................. 38

Trademark ............................................................... 38

License .................................................................... 38

LIMITED WARRANTY ............................................. 39

Recycling Information ........................................... 40

4Chapter 1 Basic Operation and Function List

Chapter 1

Basic Operation and Function List

1-1. Usage of Switches and Operation Guide

1. Displaying the operation guide

Touch any switch (except ).

The operation guide appears on the screen.

Display Function

Turns the power on or off.

Displays the Setting menu. The Setting menu is used to congure advanced monitor

settings.

Displays or hides the PinP sub window. For details on how to switch the display, refer

to “Displaying or hiding the PinP sub window” (page 12).

Attention

• The operation guide does not display this item by default. See “Setting the input

signal for the PinP sub window” (page 12) for information on how to display.

Switches PCs used to operate USB devices. For more information about how to

switch PCs, see “5-4. Switching PCs Used to Operate USB Devices” (page 24).

Attention

• The operation guide does not display this item by default. See “5-3. Showing the

Icon for Switching the USB Ports in the Operation Guide” (page 24) for information

on how to display.

Switches display modes. For more information about how to switch display modes,

see “2-4. Selecting Display Mode (CAL Switch Mode)” (page 13).

Selects an item.

Applies the selected content.

Cancels the selection.

5

Chapter 1 Basic Operation and Function List

2.

Adjusting / setting

1. Touch a switch for the icon showing the item you want to set.

The menu appears.

2. Use each switch to congure the setting. If necessary, select to apply the setting.

3.

Exiting

Select to exit the menu.

Note

• The operation guide will automatically disappear after a few seconds if no switches are operated.

6Chapter 1 Basic Operation and Function List

1-2. Basic Operation of the Setting Menu

1. Displaying the Setting menu

1. Select from the operation guide.

The Setting menu appears.

Note

• To adjust or set "Administrator Settings" items, display the Setting menu according to the following procedure:

1. Select to turn off the monitor.

2. While touching the leftmost switch ( ), touch for more than two seconds to turn on the monitor.

"Administrator Settings" appears.

2.

Adjusting / setting

1. Select a menu to adjust / set using , then select .

The advanced menu appears.

2. Select an item to adjust / set using , then select .

The Adjustment / Setting menu appears.

7

Chapter 1 Basic Operation and Function List

3. Adjust / set the selected item using , and then select .

Note

• The settings for "Administrator Settings" items are applied by selecting "Apply".

3.

Exiting

Select several times to exit the Setting menu.

Note

• The menu for "Administrator Settings" items is exited by selecting "Apply".

8Chapter 1 Basic Operation and Function List

1-3. Function List

The following table shows the items in the Setting menu.

Main menu Item Reference

CAL Switch Mode Mode “2-5. Adjusting Brightness / Colors” (page 14)

Note

• The functions that can be adjusted or set in "CAL Switch

Mode" differ depending on the mode (see “Adjustment

items for each mode” (page 14)).

Hybrid Gamma PXL

Brightness

Contrast

Temperature

Gamma

Hue

Saturation

Gain

Reset

RadiCS SelfQC SelfCalibration “3-1. Using the SelfCalibration Function” (page 19)

Grayscale Check “3-2. Using the Grayscale Check Function” (page 20)

LEA “5-11. Acquiring Life Estimation Data” (page 27)

Settings “3-3. Setting Whether to Display / Hide Warnings or QC

History” (page 21)

Preferences Input “2-2. Setting Screen Layout (Single / Dual) and Input Signal”

(page 9)

Power Save “4-1. Setting the Power Saving Mode” (page 22)

Indicator “5-6. Adjusting Brightness of the Power Switch Indicator”

(page 25)

Menu Rotation “5-12. Rotating the Setting Menu Display” (page 27)

USB Selection “5-3. Showing the Icon for Switching the USB Ports in the

Operation Guide” (page 24)

PinP “2-3. Displaying the Sub Window (PinP)” (page 11)

RadiLight Area “5-1. Setting RadiLight Area” (page 23)

Mode Skip “5-7. Skipping Unused Display Modes” (page 25)

Monitor Reset “5-15. Resetting to Defaults” (page 29)

Languages “5-2. Specifying the Language” (page 23)

Information “5-14. Viewing the Monitor Information” (page 28)

Administrator

Settings

On-Screen Logo “5-13. Setting Whether to Display / Hide the EIZO Logo”

(page 28)

Key Lock “5-9. Locking Operation Switches” (page 26)

DP Power Save “5-8. Enabling or Disabling DisplayPort Communication in

Power Saving Mode” (page 26)

Grayscale Warning “5-10. Setting Whether to Display / Hide the Grayscale

Warning” (page 27)

Sharpness Recovery “2-6. Enabling or Disabling Sharpness Recovery (the

Function of Correcting Image Clarity)” (page 18)

DisplayPort 1 “5-5. Switching the DisplayPort version” (page 25)

DisplayPort 2

9

Chapter 2 Adjusting the Screen

2-1. Compatible Resolutions

For information about the compatible resolutions of the monitor, see “Compatible Resolutions” in the

Instructions for Use.

2-2. Setting Screen Layout (Single / Dual) and Input

Signal

You can select single screen display or PbyP (dual screen display), as well as input signals.

Procedure

1. Select “Preferences” from the Setting menu, then select .

2. Select “Input”, then .

3. Select a signal or a set of signals to display, then select .

Note

• A signal or a set of signals you can select will vary depending on the DisplayPort version.

- Version 1.2

Single DisplayPort 1 / DisplayPort 2

PbyP DisplayPort 1 / DisplayPort 2

- Version 1.4

Single DisplayPort 1 / DisplayPort 2

PbyP DisplayPort 1 / DisplayPort 2

One Cable PbyP DisplayPort 1

• For details on the DisplayPort version, refer to “5-5. Switching the DisplayPort version” (page 25).

Version 1.2 Version 1.4

10 Chapter 2 Adjusting the Screen

In the PbyP mode, the input signal from “DisplayPort 1” ( ) is displayed on the left side of the screen, and

the input signal from “DisplayPort 2” ( ) is displayed on the right side of the screen.

Example:

For DisplayPort 1 / DisplayPort 2 For One Cable PbyP

Note

• When the setting is complete, the input port names appear.

11

Chapter 2 Adjusting the Screen

2-3. Displaying the Sub Window (PinP)

Main screen

Sub window

Note

• When the main screen displays the signal from “DisplayPort 1” on a single window, the PinP sub-window displays

the signal from “DisplayPort 2” or “HDMI”. Select a signal to be displayed on the PinP sub window. For more

information about how to select a signal, see “Setting the input signal for the PinP sub window” (page 12).

• When the main screen is displayed in the PbyP mode, images are displayed on the PinP sub-window by inputting

the HDMI signals only.

• The signals that can be displayed on the sub window vary according to the signals being displayed on the main

screen.

Signals on the main screen Signals on the sub window

DisplayPort 1 DisplayPort 2 / HDMI

DisplayPort 2 HDMI

• Resolutions supported for the PinP sub window are as follows. The PinP sub window displays images in 8-bits.

√: Supported

Resolution (H x V) Vertical frequency (Hz) DisplayPort HDMI

640 × 480 60 √ √

720 × 400 70 √ √

720 × 480 60 √ √

800 × 600 60 √ √

1024 × 768 60 √ √

1200 × 1600 60 √ √

1200 × 1920 60 √ √

1280 × 1024 60 √ √

1280 × 720 60 √ √

1440 × 2560 60 √ √

1600 × 1200 60 √ √

1920 × 1080 60 √ √

1920 × 1200 60 √ √

2560 × 1440 60 √ √

Attention

• The PinP sub window is not available in the following cases:

- No signal is input.

- A signal that is not supported is input.

12 Chapter 2 Adjusting the Screen

●Setting the input signal for the PinP sub window

Select a signal to be displayed on the PinP sub window when the main screen displays the

“DisplayPort 1” signal in single screen mode.

Procedure

1. Select “Preferences” from the Setting menu, then select .

2. Select “PinP”, then .

3. Select “PinP Display”, then .

4. Select “DisplayPort 2” or “HDMI”, then .

When the operation guide shows , you can choose to show or hide the PinP sub-window by using

the operation guide.

●Displaying or hiding the PinP sub window

You can select whether to display or hide the PinP sub window.

Procedure

1. Touch any switch (except ).

2. Select from the operation guide.

The PinP sub window is displayed or hidden.

Note

• By using RadiCS / RadiCS LE, you can display or hide the PinP sub window more easily using the mouse or

keyboard (Hide-and-Seek). Refer to RadiCS / RadiCS LE User’s Manual for details.

●Setting the display position of the PinP sub window

You can set the display position of the PinP sub window.

Procedure

1. Select “Preferences” from the Setting menu, then select .

2. Select “PinP”, then .

3. Select “Position” then .

4. Select “Upper Right”, “Lower Right”, “Lower Left”, or “Upper Left”, then select .

●Setting display mode (CAL Switch Mode) for the PinP sub window

You can specify the display mode for the PinP sub window.

Procedure

1. Select “Preferences” from the Setting menu, then select .

2. Select “PinP”, then .

3. Select “CAL Switch Mode”, then .

4. Select a display mode, then .

Attention

• Medical images must be shown on the PinP main screen. We recommend that the sub window be used to

display text, etc.

13

Chapter 2 Adjusting the Screen

2-4. Selecting Display Mode (CAL Switch Mode)

The display mode can be selected according to the monitor application. For information on how to specify

the display mode for the PinP sub window, see “Setting display mode (CAL Switch Mode) for the PinP

sub window” (page 12).

Display Modes

√: Can be calibrated

Mode Purpose

1-DICOM Enables display using DICOM® Part 14-compliant grayscale characteristics. √

2- CA L1 Displays the calibration status using calibration software. √

3-CAL2 √

4-Custom Select this mode to congure desired settings. -

5-sRGB Suitable for color matching with sRGB compatible peripherals. -

6-Text Suitable to display documents, spreadsheets, or other text. -

Procedure

1. Touch any switch (except ).

2. Select from the operation guide.

The Mode menu appears on the lower right.

Example:

1-DICOM

↓　↑

2-CAL1

↓　↑

3-CAL2

↓　↑

4-Custom

↓　↑

5-sRGB

↓　↑

6-Text

3. Modes are changed in sequence each time you select .

You can also select or to change modes when the Mode menu is being displayed.

Note

• The Setting menu and Mode menu cannot be displayed at the same time.

14 Chapter 2 Adjusting the Screen

2-5. Adjusting Brightness / Colors

You can adjust brightness and colors for each mode, and save the settings.

Attention

• It takes about 15 minutes for the electrical parts in the product to become stable. Please wait 15 minutes or more

after the monitor power has been turned on or the monitor has recovered from the power saving mode before

performing adjustment.

• The same image may be observed in different colors on multiple monitors due to monitor-specic characteristics.

Make ne color adjustment visually when matching colors on multiple monitors.

Note

• Use a value shown in "%" or "K" only for reference.

●Adjustment items for each mode

Adjustable functions differ depending on the mode type. (Functions that cannot be adjusted or set are

not selectable.)

√: Adjustable -: Not adjustable

Function CAL Switch Mode

1-DICOM 2-CA L1 3-CAL2 4-Custom 5-sRGB 6-Text

Hybrid Gamma PXL √ √ √ - - -

Brightness - - - √ √ √

Contrast ---√√√

Temperature ---√√√

Gamma ---√√√

Hue ---√√√

Saturation ---√√√

Gain ---√√√

Reset √√√√√√

●Enabling / Disabling Hybrid Gamma PXL

When the Hybrid Gamma PXL is enabled, this product automatically differentiates between

monochrome and color parts of the same image at a pixel level and displays a color image using the

gamma value for color image display.

Setting value

On, Off

Procedure

1. Select “CAL Switch Mode” from the Setting menu, then select .

2. Select “Hybrid Gamma PXL” and then select .

3. Select “On” or “Off” and then select .

Attention

• When the screen is displayed in the PinP mode, the Hybrid Gamma PXL function settings of the main screen

will be reected to the entire screen.

15

Chapter 2 Adjusting the Screen

●Adjusting the brightness

The screen brightness is adjusted by changing the brightness of the backlight (light source from the

LCD back panel).

Setting Range

0 to 100 %

Procedure

1. Select “CAL Switch Mode” from the Setting menu, then select .

2. Select “Brightness”, then .

3. Specify the setting using or .

4. Select after completing the setting.

●Adjusting the contrast

The brightness of the screen is adjusted by varying the video signal level.

Setting Range

0 to 100 %

Procedure

1. Select “CAL Switch Mode” from the Setting menu, then select .

2. Select “Contrast”, then .

3. Specify the setting using or .

4. Select after completing the setting.

Note

• When the contrast is set to 100 %, all the color gradations are shown.

• When adjusting the monitor, it is recommended to perform brightness adjustment, which does not lose

gradation characteristics, prior to contrast adjustment.

• Perform contrast adjustment in the following cases.

- If the screen is too bright even when the brightness is set to 0 %

●Adjusting the color temperature

Adjust the color temperature.

The color temperature is normally used to express the hue of “White” and / or “Black” with a

numerical value. The value is expressed in degrees “K” (Kelvin).

The screen becomes reddish at low color temperatures and bluish at high color temperatures, similar

to the temperatures of a ame. The gain preset values are set for each color temperature setting

value.

Setting Range

Native, 6000 K to 15000 K (in increments of 100 K), sRGB

16 Chapter 2 Adjusting the Screen

Procedure

1. Select “CAL Switch Mode” from the Setting menu, then select .

2. Select “Temperature” then .

3. Specify the setting using or .

4. Select after completing the setting.

Note

• "Gain" allows you to perform more advanced adjustment (see “Adjusting the gain” (page 17)).

• If set to "Native", the image is displayed in the preset color of the monitor (Gain: 100 % for each RGB

channel).

• When gain is changed, the color temperature is changed to “User”.

●Adjusting the gamma

Adjust the gamma. While the brightness of the monitor varies depending on the input signal, the

variation rate is not proportional to the input signal. Maintaining the balance between the input signal

and brightness of the monitor is referred to as “Gamma correction”.

Setting Range

1.6 to 2.7, sRGB

Procedure

1. Select “CAL Switch Mode” from the Setting menu, then select .

2. Select “Gamma”, then .

3. Specify the setting using or .

4. Select after completing the setting.

●Adjusting the hue

Adjust the hue.

Setting Range

-100 to 100

Procedure

1. Select “CAL Switch Mode” from the Setting menu, then select .

2. Select “Hue”, then .

3. Specify the setting using or .

4. Select after completing the setting.

Attention

• Using this function may prevent some color gradations from being able to be displayed.

17

Chapter 2 Adjusting the Screen

●Adjusting the color saturation

Adjust the color saturation.

Setting Range

-100 to 100

Procedure

1. Select “CAL Switch Mode” from the Setting menu, then select .

2. Select “Saturation”, then .

3. Specify the setting using or .

4. Select after completing the setting.

Attention

• Using this function may prevent some color gradations from being able to be displayed.

Note

• The minimum value (-100) changes the screen to monochrome.

●Adjusting the gain

The brightness of each color component (red, green, and blue) is called “gain”. The hue of “white” can

be changed by adjusting the gain.

Setting Range

0 to 100 %

Procedure

1. Select “CAL Switch Mode” from the Setting menu, then select .

2. Select “Gain”, then .

3. Select the color to be adjusted from “Red”, “Green”, and “Blue”, then select .

4. Specify the setting using or .

5. Select after completing the setting.

Attention

• Using this function may prevent some color gradations from being able to be displayed.

Note

• The gain value changes according to the color temperature.

• When gain is changed, the color temperature is changed to “User”.

18 Chapter 2 Adjusting the Screen

2-6. Enabling or Disabling Sharpness Recovery (the

Function of Correcting Image Clarity)

EIZO’s unique technology called “Sharpness Recovery” displays images that are true to the original

source data by correcting variations in the LCD panel.

Procedure

1. Select to turn off the monitor.

2. While touching the leftmost switch ( ), touch for more than two seconds to turn on the

monitor.

3. Select “Sharpness Recovery” in “Administrator Settings”, then select .

4. Select “On” or “Off” using or , then select .

5. Select “Apply”, and then select .

Attention

• After changing the setting, perform a visual check according to the medical standards / guidelines.

19

Chapter 3 Controlling Monitor Quality

The monitor includes the Integrated Front Sensor, which enables you to perform calibration and Grayscale

Check independently.

Note

• Calibration can be performed periodically by using the schedule function of RadiCS LE that is attached to the

monitor. For more information about the setup procedure, refer to the RadiCS LE User’s Manual (stored on the CD-

ROM).

• RadiCS enables you to congure the schedule settings for Grayscale Check as well as for calibration. For more

information about the setup procedure, refer to the RadiCS User’s Manual.

• If you want to perform high-level quality control in compliance with medical standards / guidelines, use optional

quality control software kit "RadiCS UX2".

• To adjust measurement results of the Integrated Front Sensor to those of an EIZO external sensor (UX2 Sensor),

perform correlation between the Integrated Front Sensor and the external sensor by using RadiCS / RadiCS LE.

Periodical correlation allows you to maintain the measurement accuracy of the Integrated Front Sensor at a level

equivalent to that of the external sensor. For details, refer to the RadiCS / RadiCS LE User’s Manual.

3-1. Using the SelfCalibration Function

Execute SelfCalibration and view the latest results.

●Executing SelfCalibration

Procedure

1. Select “RadiCS SelfQC” from the Setting menu, then select .

2. Select “SelfCalibration” for “RadiCS SelfQC”, then select .

3. Select “Execute”, then .

SelfCalibration is executed.

Attention

• If the power to the PC is turned off or the input signal switches while SelfCalibration is running, the execution

will be canceled.

• After SelfCalibration is complete, perform Grayscale Check at the same room temperature and illuminance

as those in the actual working environment.

Note

• The following items can be set by using RadiCS / RadiCS LE. For more information about the setup

procedure, refer to the RadiCS / RadiCS LE User’s Manual.

-Calibration target

-SelfCalibration schedule

- If you have congured the schedule using RadiCS / RadiCS LE, the next execution schedule is displayed in

the advanced menu.

• The calibration target value can be conrmed by selecting the target mode in "CAL Switch mode" of the

Setting menu.

20 Chapter 3 Controlling Monitor Quality

●Checking the SelfCalibration results

Attention

• The results can be checked when "QC History" is set to "On" (see “3-3. Setting Whether to Display / Hide

Warnings or QC History” (page 21)).

Procedure

1. Select “RadiCS SelfQC” from the Setting menu, then select .

2. Select “SelfCalibration”, then .

3. Select “Result”, then .

4. Select “DICOM”, “CAL1”, or “CAL2”, then select .

The SelfCalibration results (such as Max. Error Rate, Last Time, and Error Code) are displayed.

3-2. Using the Grayscale Check Function

Perform Grayscale Check and view the latest results. Furthermore, if you have congured the schedule

using RadiCS, the next execution schedule is displayed.

●Performing Grayscale Check

Attention

• Perform the Grayscale Check based on the actual color temperature and brightness of the working

environment.

Procedure

1. Select “RadiCS SelfQC” from the Setting menu, then select .

2. Select “Grayscale Check”, then .

3. Select “Execute”, then .

Grayscale Check is executed.

Attention

• The determination value for Grayscale Check can be specied from RadiCS. Refer to the RadiCS User’s

Manual for details.

• The Grayscale Check schedule can be congured using RadiCS. For more information about the setup

procedure, refer to the RadiCS User’s Manual. If you have congured the schedule using RadiCS, the next

execution schedule is displayed in the advanced menu.

Pagina se încarcă ...

Eizo RX1270 Manualul proprietarului

Eizo RX1270 Manualul proprietarului

în alte limbi

Lucrări conexe