MikroTik SXT R Ghid de inițiere rapidă

Marca: MikroTik

Model: SXT R

Tip: Ghid de inițiere rapidă

Acest manual este potrivit și pentru

RBSXTR

SXT R

The SXT R comes without modem, it has built-in LTE antenna, two 10/100 Ethernet connectors which support MDI-

X auto detection. There are two micro SIM card slots available, to switch between cell providers.

First use

1. Install the desired card into miniPCIe slot, please refer to paragraph miniPCIe slot usage.

2. Insert the SIM cards into the micro SIM slots (SIM A slot is a default).

3. Mount unit in your desired location, please refer to the paragraph Mounting.

4. The SXT accepts 18-57 V PoE from the supplied PoE injector or 802.3af/at compatible switches. Please

see Powering section for details.

5. Use the “PoE+Data” end of the injector to connect an Ethernet cable to the first port (ETH 1) behind the

small plastic door, plug the other end of the PoE injector into your computer or switch.

6. The device will boot up and Wireless network will be available for connecting.

7. Once connected to the wireless network, open http://192.168.88.1 in your web browser to start

configuration, since there is no password by default, you will be logged in automatically.

8. In the Webfig quickSet configuration interface that will load, enter your APN.

9. We recommend clicking the “Check for updates” button and updating your RouterOS software to the latest

version to ensure the best performance and stability,

10. Choose your country, to apply country regulation settings and set up your password in the screen that

loads.

Expansion slots and ports

• Two 10/100 Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight

or crossover cable can be used for connecting to other network devices.

• MiniPCIe slot and two SIM slots (can’t be used separately) to be used with a 3G/4G/LTE modems.

• The Mode button allows you to run any script when the button is pushed.

Powering

The device accepts 18-57 V DC passive and 802.3af/at PoE power from the Ethernet port ETH1. Package contains

a 24 V adapter and a passive PoE injector. Power consumption without attachments up to 6 W.

Connecting to a POE Adapter:

1. Connect the Ethernet cable from the device to the POE port of the POE adapter.

2. Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data

and power flow.

3. Connect the power cord to the adapter, and then plug the power cord into a power outlet.

Configuration

Once logged in, we recommend clicking the “Check for updates” button in the QuickSet menu, as updating your

RouterOS software to the latest version ensures the best performance and stability. For wireless models, please

make sure you have selected the country where the device will be used, to conform with local regulations.

RouterOS includes many configuration options in addition to what is described in this document. We suggest

starting here to get yourself accustomed to the possibilities: http://mt.lv/help. In case IP connection is not available,

the Winbox tool (http://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side

(all access is blocked from the Internet port by default).

For recovery purposes, it is possible to boot the device from the network, see a section Reset button.

See mikrotik.com/products for the latest version of this document. Document #50019 Modified on: 12.JUN.2019

MiniPCIe slot usage

This SXT version is without factory modem installed. In order to install the module you will need to remove plastic

top and withdraw PCB plate from the bottom case. Installing a miniPCIe module should be done by a qualified

person, please follow safety precautions when handling electrical equipment:

1. Use a wrist grounding strap when unpacking and working with electrical components to avoid electrical

discharge (ESD) damage.

2. Removing top cover, insert plastic tool in one of the six holes, turn slightly to the side and twitch carefully to

slightly release the cover from holding into the place.

3. Continue to work around until all of the clamps are released.

4. Remove the top cover by lifting it up.

5. You will access the upper side of PCB and antenna, remove two black soft pads to access PCB holders.

6. Push both plastic holders to opposite sides to release PCB board from its position.

7. Remove PCB board, carefully lift it up and place on the anti-static mat.

8. Locate the miniPCIe slot on the bottom of the PCB and remove two factory attached screws.

9. Attach provided a thick thermal pad to the card.

10. Install the card into miniPCIe slot so that the thermal pad is between PCB and card.

11. Secure card in place using previously removed two screws.

12. Attach the grey uFL connector to the MAIN antenna connector of the modem, attach the black cable to the

secondary (or AUX) connector. Use silicone type rubber to secure wiring in place.

13. Attach a thinner thermal pad to the top of the card.

14. Reassembly in back order.

After you have reinserted the device into the case, slide in the SIM cards from your mobile operator into the SIM

slots, with the chips facing down. The slot accepts miniSIM (2FF). The device will be ready for mounting.

See mikrotik.com/products for the latest version of this document. Document #50019 Modified on: 12.JUN.2019

Mounting

SXT designed to be mounted on the pole, the package includes mounting bracket and steel clamp.

1. With the clip pointed forward, slide the

mounting bracket into the rail on the

bottom of the case, until the clip clicks into

place.

2. Guide the clamp through the opening in

the bracket.

3. Attach the unit to a pole, with the Ethernet

port pointing downward.

4. Use a PH2 screwdriver to tighten the rings

when alignment is complete.

5. Fix the Ethernet cable to the pole using zip

ties, less than one meter from the unit, to

avoid the cable being pulled out of the port.

6. Check mounting angle and positioning.

When mounting outdoors, please ensure that any

cable openings are directed downwards. Use POE

injector and proper grounding, this device has

specially designed grounding connector under the

port cover. Recommended using Cat5/6 cable. The

IP rating scale for this device is IP54.

The SXT device has a sliding door, behind which

the Ethernet ports and the reset buttons are

located. This door can be also secured shut with a

screw in the provided screw hole.

When using both Ethernet ports, make sure to cut

a wider cable opening in the plastic door. You can

use pliers to tear out the plastic piece that is

protecting the cable opening. When closing the

plastic door, make sure to apply pressure, until it

“clicks” into place.

Mounting and configuration of this device should be done by a qualified person.

Grounding

The installation infrastructure (towers and masts), as well as the router itself, must be properly grounded. The

device includes a grounding wire attachment screw behind the case door. Attach your grounding wire to the

grounding screw, then attach the other end of the grounding wire to the grounded mast. This is to substantially

reduce the risk of ESD and lightning damage.

LED indicators

• Power LED indicates that the unit is receiving power in the ETH1 port.

• LTE LED indicates that the device is currently connected to a cellular tower.

• LTE Signal LEDs display the strength of the cellular signal.

• PoE LED indicates that the ETH2 port is currently powering another device with PoE.

See mikrotik.com/products for the latest version of this document. Document #50019 Modified on: 12.JUN.2019

Reset button

RouterBOOT reset button has the following functions. Press the button and apply the power, then:

• Release the button when a green LED starts flashing, to reset RouterOS configuration to defaults.

• Release the button when the LED turns solid green to clear all configuration and defaults.

• Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers

(required for reinstalling RouterOS over the network).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed

before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Mode button

The action of the mode buttons can be configured from RouterOS software to execute any user-supplied RouterOS

script. You can also disable this button. The mode button can be configured in RouterOS menu /system routerboard

mode-button.

Accessories

Package includes following accessories that comes with the device:

• DC ⎓ EU/US Switching Power Supply 24 V, 0.8 A, 19.2 W, 85.3%, VI, cable:150 cm Hor CMC.

• Hose Clamp SUS304 (Philips type ; clamping diameter range 35-70 mm).

• POE Injector with shielded connector.

• SXT5D mounting

• Elastic thermal pad, 25x40x3,2 mm (ziplock bag).

Specifications

For more information about this product, specification and pictures please visit our web page:

https://mikrotik.com/product/sxt_r

Operating system support

The device supports RouterOS software version 6. The specific factory installed version number is indicated in the

RouterOS menu /system resource. Other operating systems have not been tested.

See mikrotik.com/products for the latest version of this document. Document #50019 Modified on: 12.JUN.2019

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. This device and its antenna must not be co-located or operation

in conjunction with any other antenna or transmitter.

IMPORTANT: Exposure to Radio Frequency Radiation.

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part

of your body.

Industry Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following

two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)

l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en

compromettre le fonctionnement.

IMPORTANT: Exposure to Radio Frequency Radiation.

This equipment complies with the IC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part

of your body.

Cet équipement est conforme aux limites d'exposition au rayonnement IC définies pour un environnement non

contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et toute

partie de votre corps.

CAN ICES-3 (B)/NMB-3(B)FCC

See mikrotik.com/products for the latest version of this document. Document #50019 Modified on: 12.JUN.2019

CE Declaration of Conformity

Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.

BG С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RouterBOARD е в съответствие с Директива 2014/53/ЕС.

Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: https://mikrotik.com/products

CS Tímto Mikrotīkls SIA prohlašuje, že typ rádiového zařízení RouterBOARD je v souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o

shodě je k dispozici na této internetové adrese: https://mikrotik.com/products

DA Hermed erklærer Mikrotīkls SIA , at radioudstyrstypen RouterBOARD er i overensstemmelse med direktiv 2014/53/EU. EU-

overensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse: https://mikrotik.com/products

DE Hiermit erklärt Mikrotīkls SIA , dass der Funkanlagentyp RouterBOARD der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-

Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: https://mikrotik.com/products

EL Με την παρούσα ο/η Mikrotīkls SIA , δηλώνει ότι ο ραδιοεξοπλισμός RouterBOARD πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της

δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο: https://mikrotik.com/products

EN Hereby, Mikrotīkls SIA declares that the radio equipment type RouterBOARD is in compliance with Directive 2014/53/EU. The full text of the

EU declaration of conformity is available at the following internet address: https://mikrotik.com/products

ES Por la presente, Mikrotīkls SIA declara que el tipo de equipo radioeléctrico RouterBOARD es conforme con la Directiva 2014/53/UE. El texto

completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: https://mikrotik.com/products

ET Käesolevaga deklareerib Mikrotīkls SIA , et käesolev raadioseadme tüüp RouterBOARD vastab direktiivi 2014/53/EL nõuetele. ELi

vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil: https://mikrotik.com/products

FI Mikrotīkls SIA vakuuttaa, että radiolaitetyyppi RouterBOARD on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen

täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: https://mikrotik.com/products

FR Le soussigné, Mikrotīkls SIA , déclare que l'équipement radioélectrique du type RouterBOARD est conforme à la directive 2014/53/UE. Le

texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante: https://mikrotik.com/products

HR Mikrotīkls SIA ovime izjavljuje da je radijska oprema tipa RouterBOARD u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o

sukladnosti dostupan je na sljedećoj internetskoj adresi: https://mikrotik.com/products

HU Mikrotīkls SIA igazolja, hogy a RouterBOARD típusú rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatkozat

teljes szövege elérhető a következő internetes címen: https://mikrotik.com/products

IT Il fabbricante, Mikrotīkls SIA , dichiara che il tipo di apparecchiatura radio RouterBOARD è conforme alla direttiva 2014/53/UE. Il testo

completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: https://mikrotik.com/products

IS Hér með lýsir Mikrotīkls SIA því yfir að RouterBOARD er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU.

Fullur texti ESB samræmisyfirlýsingar er að finna á eftirfarandi veffangi: https://mikrotik.com/products

LT Aš, Mikrotīkls SIA , patvirtinu, kad radijo įrenginių tipas RouterBOARD atitinka Direktyvą 2014/53/ES. Visas ES atitikties deklaracijos tekstas

prieinamas šiuo interneto adresu: https://mikrotik.com/products

LV Ar šo Mikrotīkls SIA deklarē, ka radioiekārta RouterBOARD atbilst Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams

šādā interneta vietnē: https://mikrotik.com/products

MT B'dan, Mikrotīkls SIA , niddikjara li dan it-tip ta' tagħmir tar-radju RouterBOARD huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-

dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ġej: https://mikrotik.com/products

NL Hierbij verklaar ik, Mikrotīkls SIA , dat het type radioapparatuur RouterBOARD conform is met Richtlijn 2014/53/EU. De volledige tekst van

de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: https://mikrotik.com/products

NO Mikrotīkls SIA erklærer herved at utstyret RouterBOARD er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv

2014/53/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: https://mikrotik.com/products

PL Mikrotīkls SIA niniejszym oświadcza, że typ urządzenia radiowego RouterBOARD jest zgodny z dyrektywą 2014/53/UE. Pełny tekst

deklaracji zgodności UE jest dostępny pod następującym adresem internetowym: https://mikrotik.com/products

PT O(a) abaixo assinado(a) Mikrotīkls SIA declara que o presente tipo de equipamento de rádio RouterBOARD está em conformidade com a

Diretiva 2014/53/UE. O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet:

https://mikrotik.com/products

RO Prin prezenta, Mikrotīkls SIA declară că tipul de echipamente radio RouterBOARD este în conformitate cu Directiva 2014/53/UE. Textul

integral al declarației UE de conformitate este disponibil la următoarea adresă internet: https://mikrotik.com/products

SK Mikrotīkls SIA týmto vyhlasuje, že rádiové zariadenie typu RouterBOARD je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o

zhode je k dispozícii na tejto internetovej adrese: https://mikrotik.com/products

SL Mikrotīkls SIA potrjuje, da je tip radijske opreme RouterBOARD skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je

na voljo na naslednjem spletnem naslovu: https://mikrotik.com/products

SV Härmed försäkrar Mikrotīkls SIA att denna typ av radioutrustning RouterBOARD överensstämmer med direktiv 2014/53/EU. Den fullständiga

texten till EU-försäkran om överensstämmelse finns på följande webbadress: https://mikrotik.com/products

MPE statement

This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and

operated with minimum distance of 20 cm between the radiator and your body, unless specifically stated otherwise in page 1 of this document.

In RouterOS you must specify your country, to make sure local wireless regulations are observed.

Frequency bands terms of use

Frequency range (for applicable models)Channels used Maximum Output Power (EIRP) Restriction

2412-2472 MHz 1 - 13 20 dBm Without any restriction to use in all EU Member States

5150-5250 MHz 26 - 48 23 dBm Restricted to indoor use only*

5250-5350 MHz 52 - 64 20 dBm Restricted to indoor use only*

5470-5725 MHz 100 - 140 27 dBm Without any restriction to use in all EU Member States

* It is the customer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling

requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed!

Note. Information contained here is subject to change. Please visit the product page on www.mikrotik.com for the most up to date version of this

document.

See mikrotik.com/products for the latest version of this document. Document #50019 Modified on: 12.JUN.2019

BG. Инструкция: Свържете адаптера на захранване, за да включите устройството. Отворете 192.168.88.1 в уеб браузър, за да
настроите продукта. Повече информация в http://mt.lv/help-bg
CS. Návod k použití: Připojte  napájecí adaptér k  zapnutí přístroje.  Otevřete 192.168.88.1  ve webovém prohlížeči  pro konfiguraci  produktu.
Více informací najdete v http://mt.lv/help-cs
DA. Instruktionsbog: Tilslut strømadapteren for at tænde for enheden. Åbn 192.168.88.1 i en webbrowser til at konfigurere produktet. Mere
information i http://mt.lv/help-da
DE. Bedienungsanleitung: Verbinden Sie das Netzteil, um das Gerät einzuschalten. Öffnen Sie 192.168.88.1 in einem Web-Browser, um das
Produkt zu konfigurieren.  Weitere Informationen im http://mt.lv/help-de
EL. εγχειρίδιο οδηγιών: Συνδέστε τον προσαρμογέα τροφοδοσίας για να ενεργοποιήσετε τη μονάδα. Ανοίξτε 192.168.88.1 σε ένα πρόγραμμα
περιήγησης στο Web για να διαμορφώσετε το προϊόν. Περισσότερες πληροφορίες στο http://mt.lv/help-el
EN. Instruction manual:  Connect the power adapter to turn on the device. Open 192.168.88.1 in your web browser, to configure it. More
information on http://mt.lv/help
ES. Manual de instrucciones: Conecte el adaptador de alimentación para encender la unidad. Abra 192.168.88.1 en un navegador web para
configurar el producto. Más información en http://mt.lv/help-es
ET.   Kasutusjuhend:   Ühendage  toiteadapter  seadme  sisselülitamiseks.  Avatud  192.168.88.1  in  veebilehitseja  seadistada  toodet.  Rohkem
teavet http://mt.lv/help-et
FI. Käyttöohje: Kytke virtalähde päälle laitteen. Avaa 192.168.88.1 in selaimen määrittää tuotteen. Lisää tietoa http://mt.lv/help-fi
FR.   Mode   d'emploi:  Connectez   l'adaptateur  d'alimentation  pour  allumer  l'appareil.  Ouvrez  192.168.88.1  dans   un  navigateur  Web  pour
configurer le produit. Plus d'informations dans http://mt.lv/help-fr
HR. Uputa za uporabu: Priključite napajanje i uključite uređaj. Za konfiguraciju uređaja u pregledniku otvorite 192.168.88.1. Više informacija je
na http://mt.lv/help-hr
HU.  Használati utasítás:  Csatlakoztassa a hálózati  adaptert  a készülék bekapcsolásához.  Megnyitása  192.168.88.1  egy webböngészőben
beállítani a terméket. Több információ http://mt.lv/help-hu
IT. Manuale di istruzioni: Collegare l'adattatore di alimentazione per accendere l'unità. Aprire 192.168.88.1 in un browser Web per configurare
il prodotto. Maggiori informazioni in http://mt.lv/help-it
IS. Notkunarleiðbeiningar: Tengdu straumbreytinn til að kveikja á tækinu. Opnaðu 192.168.88.1 í vafra til að stilla það. Nánari 
upplýsingar á http://mt.lv/help-is
NO.  Instruksjonsmanual: Koble strømadapteren  for  å   slå   på   enheten.   Åpne  192.168.88.1  i  nettleseren   din for  å konfigurere den. Mer
informasjon på http://mt.lv/help-no
LT.  Naudojimosi instrukcija:  Prijunkite  maitinimo adapterį  įjunkite įrenginį.  Į interneto  naršyklę  192.168.88.1  Atidarykite  galite konfigūruoti
gaminį. Daugiau informacijos rasite http://mt.lv/help-lt
LV. Lietošanas instrukcija: Pievienojiet Strāvas adapteri, lai ieslēgtu ierīci. Atvērt 192.168.88.1 ar interneta pārlūku, lai konfigurētu produktu.
Plašāka informācija http://mt.lv/help-lv
MT.  Manwal   tal-istruzzjoni:  Qabbad  l-adapter   tal-qawwa   biex   iddawwar  it-tagħmir.  Iftaħ   192.168.88.1   fil-web   browser  tiegħek,  biex  jiġi
kkonfigurat. Aktar informazzjoni fuq http://mt.lv/help-mt
NL. Handleiding:  Sluit  voedingsadapter  aan  op  het  apparaat in te schakelen.  Open  192.168.88.1  in  een webbrowser om  het  product te
configureren. Meer informatie in http://mt.lv/help-nl
PL.   Instrukcja   obsługi:  Podłącz  adapter  zasilania,   aby   włączyć  urządzenie.  Otwórz  192.168.88.1  w   przeglądarce   internetowej,   aby
skonfigurować urządzenie. Więcej informacji w http://mt.lv/help-pl
PT.  Manual de instruções:  Conecte o adaptador de alimentação para ligar o aparelho. Abra 192.168.88.1  em um navegador da web  para
configurar o produto. Mais informações em http://mt.lv/help-pt
RO. Instrucțiuni de utilizare: Conectați adaptorul de alimentare pentru a porni aparatul. Deschide 192.168.88.1 într-un browser web pentru a
configura produsul. Mai multe informații în http://mt.lv/help-ro
SK. Navodila: Priključite napajalnik za vklop naprave. Odprite 192.168.88.1 v spletnem brskalniku nastaviti izdelek. Več informacij v 
http://mt.lv/help-sk
SL. Návod na použitie: Pripojte napájací adaptér k zapnutiu prístroja. Otvorte 192.168.88.1 vo webovom prehliadači pre konfiguráciu produktu.
Viac informácií nájdete v http://mt.lv/help-sl
SV. Instruktionsmanual: Anslut nätadaptern för att slå på enheten. Öppna 192.168.88.1 i en webbläsare för att konfigurera produkten. Mer
information på http://mt.lv/help-sv
NO.  Bruksanvisningen:  Koble  strømadapteren  for å slå på  enheten.  Åpne  192.168.88.1  i  en nettleser for å  konfigurere produktet.  Mer
informasjon på http://mt.lv/help-no
RU. Руководство по эксплуатации: подключите адаптер питания чтобы включить устройство. Откройте 192.168.88.1 в своем
веб-браузере для конфигурации. Дополнительная информация http://mt.lv/help-ru
CN. 说明书。   连接电源适配器以打开设备。 在Web 浏览器中打开192.168.88.1  进行配置。 有关http://mt.lv/help-zh 的更多信息
See mikrotik.com/products for the latest version of this document. Document #50019 Modified on: 12.JUN.2019